x86/efi changes for v3.6

index 7c3a880..c6539a4 100644
@@ -54,6 +54,9 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 		beyond the kernel_alignment added, new init_size and
 		pref_address fields.  Added extended boot loader IDs.
 
+Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
+		protocol entry point.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or

@@ -189,6 +192,7 @@ Offset	Proto	Name		Meaning
 				of struct setup_data
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
+0264/4	2.11+	handover_offset	Offset of handover entry point
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.

@@ -690,6 +694,16 @@ Offset/size:	0x260/4
   else
 	runtime_start = pref_address
 
+Field name:	handover_offset
+Type:		read
+Offset/size:	0x264/4
+
+  This field is the offset from the beginning of the kernel image to
+  the EFI handover protocol entry point. Boot loaders using the EFI
+  handover protocol to boot the kernel should jump to this offset.
+
+  See EFI HANDOVER PROTOCOL below for more details.
+
 
 **** THE IMAGE CHECKSUM
 

@@ -1010,3 +1024,30 @@ segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
 must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
 must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
 address of the struct boot_params; %ebp, %edi and %ebx must be zero.
+
+**** EFI HANDOVER PROTOCOL
+
+This protocol allows boot loaders to defer initialisation to the EFI
+boot stub. The boot loader is required to load the kernel/initrd(s)
+from the boot media and jump to the EFI handover protocol entry point
+which is hdr->handover_offset bytes from the beginning of
+startup_{32,64}.
+
+The function prototype for the handover entry point looks like this,
+
+    efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
+
+'handle' is the EFI image handle passed to the boot loader by the EFI
+firmware, 'table' is the EFI system table - these are the first two
+arguments of the "handoff state" as described in section 2.3 of the
+UEFI specification. 'bp' is the boot loader-allocated boot params.
+
+The boot loader *must* fill out the following fields in bp,
+
+    o hdr.code32_start
+    o hdr.cmd_line_ptr
+    o hdr.cmdline_size
+    o hdr.ramdisk_image (if applicable)
+    o hdr.ramdisk_size  (if applicable)
+
+All other fields should be zero.

index c85e3ac..aa4aaf1 100644
@@ -42,6 +42,16 @@ ENTRY(startup_32)
 	 */
 	add	$0x4, %esp
 
+	call	make_boot_params
+	cmpl	$0, %eax
+	je	1f
+	movl	0x4(%esp), %esi
+	movl	(%esp), %ecx
+	pushl	%eax
+	pushl	%esi
+	pushl	%ecx
+
+	.org 0x30,0x90
 	call	efi_main
 	cmpl	$0, %eax
 	movl	%eax, %esi

index 87e03a1..2c4b171 100644
@@ -209,6 +209,16 @@ ENTRY(startup_64)
 	.org 0x210
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
+	pushq	%rdi
+	pushq	%rsi
+	call	make_boot_params
+	cmpq	$0,%rax
+	je	1f
+	mov	%rax, %rdx
+	popq	%rsi
+	popq	%rdi
+
+	.org 0x230,0x90
 	call	efi_main
 	movq	%rax,%rsi
 	cmpq	$0,%rax

index 8bbea6a..097f476 100644
@@ -263,7 +263,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x020a		# header version number (>= 0x0105)
+		.word	0x020b		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG

@@ -381,6 +381,8 @@ pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 #define INIT_SIZE VO_INIT_SIZE
 #endif
 init_size:		.long INIT_SIZE		# kernel initialization size
+handover_offset:	.long 0x30		# offset to the handover
+						# protocol entry point
 
 # End of setup header #####################################################