sysprof: New package.
PATCH 1/1 sysprof: New package.
--- package/Config.in | 1 + package/sysprof/Config.in | 21 +++++++++++++++++++++ package/sysprof/sysprof.mk | 15 +++++++++++++++ 3 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 package/sysprof/Config.in create mode 100644 package/sysprof/sysprof.mk
package/Config.in +1 -0
@@ -39,6 +39,7 @@ source "package/ramspeed/Config.in" source "package/rt-tests/Config.in" source "package/strace/Config.in" source "package/stress/Config.in" +source "package/sysprof/Config.in" source "package/whetstone/Config.in" source "package/valgrind/Config.in" source "package/pv/Config.in"
package/sysprof/Config.in new file +21 -0
@@ -0,0 +1,21 @@ +config BR2_PACKAGE_SYSPROF + bool "sysprof" + select BR2_PACKAGE_LIBGLIB2 + depends on BR2_USE_WCHAR # glib2 + help + Sysprof is a statistical, system-wide profiler that can + profile user and kernel code using the perf API. + + http://sysprof.com + +config BR2_PACKAGE_SYSPROF_GUI + bool "sysprof GUI" + depends on BR2_PACKAGE_SYSPROF + depends on BR2_PACKAGE_LIBGTK2 + select BR2_PACKAGE_LIBGLADE + select BR2_PACKAGE_GDK_PIXBUF + help + GUI for the sysprof system-wide statistical profiler. + +comment "sysprof requires a toolchain with WCHAR support" + depends on !BR2_USE_WCHAR
package/sysprof/sysprof.mk new file +15 -0
@@ -0,0 +1,15 @@ +############################################################# +# +# sysprof +# +############################################################# + +SYSPROF_VERSION = 1.1.8 +SYSPROF_SITE = http://sysprof.com +SYSPROF_DEPENDENCIES = libglib2 + +ifeq ($(BR2_PACKAGE_SYSPROF_GUI),y) +SYSPROF_DEPENDENCIES += libgtk2 libglade gdk-pixbuf +endif + +$(eval $(call AUTOTARGETS))
Signature · 8 lines
1.7.1 -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-sysprof-New-package.patch Type: application/octet-stream Size: 2300 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120727/d2e568fa/attachment.obj>
Thomas Petazzoni
AppliedPATCH 1/1 sysprof: New package.
Le Fri, 27 Jul 2012 16:26:23 +0100,
Will Newton <[email protected]> a ?crit :
Quoted 1 line
Signed-off-by Will Newton <[email protected]>
Applied, thanks. I did some changes to the package, though:
- add dependencies on the supported architectures to avoid build failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel version. This patch is present upstream. However since it modifies configure.ac, we need to autoreconf the package.
- change AUTOTARGETS to autotools-package
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 sysprof: New package.
Hello Will,
Le Mon, 30 Jul 2012 23:58:30 +0200,
Thomas Petazzoni <[email protected]> a ?crit :
Quoted 5 lines
Le Fri, 27 Jul 2012 16:26:23 +0100,
Will Newton <[email protected]> a ?crit :Quoted 1 line
Signed-off-by Will Newton <[email protected]>
Quoted 8 lines
Applied, thanks. I did some changes to the package, though:
- add dependencies on the supported architectures to avoid build failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel version. This patch is present upstream. However since it modifies configure.ac, we need to autoreconf the package.
- change AUTOTARGETS to autotools-package
Unfortunately, the sysprof package has a number of build problems on x86 and ppc. See:
http://autobuild.buildroot.org/results/60728435af0221548c817cc8771674cc088e4d10/build-end.log
http://autobuild.buildroot.org/results/2d0ce96b30d32992d8f55f3a5974a81bbdb88915/build-end.log
It has been causing quite a few build failures since I merged the package, so it would be good to fix those.
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 sysprof: New package.
On Tue, Jul 31, 2012 at 10:04 AM, Thomas Petazzoni <[email protected]> wrote:
Hi Thomas,
Quoted 19 lines
Hello Will,
Le Mon, 30 Jul 2012 23:58:30 +0200,
Thomas Petazzoni <[email protected]> a ?crit :Quoted 5 lines
Le Fri, 27 Jul 2012 16:26:23 +0100,
Will Newton <[email protected]> a ?crit :Quoted 1 line
Signed-off-by Will Newton <[email protected]>Quoted 8 lines
Applied, thanks. I did some changes to the package, though:
- add dependencies on the supported architectures to avoid build failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel version. This patch is present upstream. However since it modifies configure.ac, we need to autoreconf the package.
- change AUTOTARGETS to autotools-package
Quoted 8 lines
Unfortunately, the sysprof package has a number of build problems on x86 and ppc. See:
http://autobuild.buildroot.org/results/60728435af0221548c817cc8771674cc088e4d10/build-end.log
http://autobuild.buildroot.org/results/2d0ce96b30d32992d8f55f3a5974a81bbdb88915/build-end.logIt has been causing quite a few build failures since I merged the package, so it would be good to fix those.
Would something like the below be acceptable? It's not very clean but until uClibc supports this define I don't know if there is a better alternative.
uClibc does not define NT_GNU_BUILD_ID like glibc, so add a definition here until uClibc catches up.
--- package/sysprof/sysprof-02-uclibc-build-id.patch | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) create mode 100644 package/sysprof/sysprof-02-uclibc-build-id.patch
(quoted diff) +0 -0
b/package/sysprof/sysprof-02-uclibc-build-id.patch new file mode 100644
index 0000000..932eba1
package/sysprof/sysprof-02-uclibc-build-id.patch new file +14 -0
@@ -0,0 +1,14 @@ +diff -u sysprof-1.1.8.old/elfparser.c sysprof-1.1.8/elfparser.c +--- sysprof-1.1.8.old/elfparser.c 2012-07-23 15:32:14.076213706 +0100 ++++ sysprof-1.1.8/elfparser.c 2012-07-23 15:33:49.092091443 +0100 +@@ -21,6 +21,10 @@ + #include <sys/mman.h> + #include "elfparser.h" + ++#ifndef NT_GNU_BUILD_ID ++#define NT_GNU_BUILD_ID 3 ++#endif ++ + typedef struct Section Section; + + struct ElfSym
Signature · 8 lines
1.7.1 -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-sysprof-Add-patch-to-enable-building-with-uClibc.patch Type: application/octet-stream Size: 1220 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120731/91c5d1ef/attachment.obj>
PATCH 1/1 sysprof: New package.
Le Tue, 31 Jul 2012 11:31:20 +0100,
Will Newton <[email protected]> a ?crit :
Quoted 3 lines
Would something like the below be acceptable? It's not very clean but until uClibc supports this define I don't know if there is a better alternative.
It's similar to
http://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-kernel/sysprof/files/define-NT_GNU_BUILD_ID.patch,
so I guess it's acceptable. The perf people are also doing the same thing apparently.
Thanks, I will commit this!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 sysprof: New package.
In reply to Will NewtonLe Tue, 31 Jul 2012 11:31:20 +0100,
Will Newton <[email protected]> a ?crit :
Quoted 6 lines
Quoted 2 lines
It has been causing quite a few build failures since I merged the package, so it would be good to fix those.
Would something like the below be acceptable? It's not very clean but until uClibc supports this define I don't know if there is a better alternative.
I've pushed your patch. It solves the build failure on x86, and removes one error message from the PowerPC build, but the PowerPC build is still failing:
http://autobuild.buildroot.org/results/a3ef351704317a9f3f3ab4ee3845bc1e61938c23/build-end.log.
It has caused ~5 build failures during the last night.
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 sysprof: New package.
Le Wed, 1 Aug 2012 10:03:05 +0200,
Thomas Petazzoni <[email protected]> a ?crit :
Quoted 4 lines
I've pushed your patch. It solves the build failure on x86, and removes one error message from the PowerPC build, but the PowerPC build is still failing:
http://autobuild.buildroot.org/results/a3ef351704317a9f3f3ab4ee3845bc1e61938c23/build-end.log.
I have pushed another patch (taken from upstream) that fixes this problem, so no need to spend time on this one.
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com