add ST PSD4256G6V to table of supported legacy flashs
PATCH 1/2 add ST PSD4256G6V to table of supported legacy flashs
The BF533-EZKIT boards have this old ST flash.
--- drivers/mtd/jedec_flash.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
drivers/mtd/jedec_flash.c +20 -0
@@ -30,6 +30,7 @@/*#define DEBUG*/ #include <common.h> +#include <mtd/cfi_flash.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/byteorder.h>
@@ -58,6 +59,9 @@#define AM29F032B 0x0041#define AM29F002T 0x00B0 +/* ST - www.st.com */ +#define PSD4256G6V 0x00e9 +/* SST */ #define SST39LF800 0x2781#define SST39LF160 0x2782
@@ -367,6 +371,22 @@ static const struct amd_flash_info jedec_table[] = { } },#endif +#ifdef CONFIG_SYS_FLASH_LEGACY_1Mx16 + { + .mfr_id = (u16)STM_MANUFACT, + .dev_id = 0xff00 | PSD4256G6V, + .name = "ST PSD4256G6V", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x0AAA /* x16 */ + }, + .DevSize = SIZE_1MiB, + .CmdSet = CFI_CMDSET_AMD_STANDARD, + .NumEraseRegions = 4, + .regions = { + ERASEINFO(0x10000, 16), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
Signature · 1 line
1.7.9.7
PATCH 2/2 Blackfin: bf533-ezkit: convert to CFI flash driver
--- board/bf533-ezkit/Makefile | 2 +- board/bf533-ezkit/bf533-ezkit.c | 22 +- board/bf533-ezkit/flash-defines.h | 124 ---------- board/bf533-ezkit/flash.c | 489 ------------------------------------- include/configs/bf533-ezkit.h | 14 +- 5 files changed, 26 insertions(+), 625 deletions(-) delete mode 100644 board/bf533-ezkit/flash-defines.h delete mode 100644 board/bf533-ezkit/flash.c
board/bf533-ezkit/Makefile +1 -1
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y := $(BOARD).o flash.o +COBJS-y := $(BOARD).o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y))
board/bf533-ezkit/bf533-ezkit.c +15 -7
@@ -27,8 +27,8 @@#include <common.h> #include <netdev.h> +#include <asm/io.h> #include "psd4256.h" -#include "flash-defines.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -42,16 +42,24 @@ int checkboard(void)/* miscellaneous platform dependent initialisations */ int misc_init_r (void ) { -/* Set direction bits for Video en/decoder reset as output */ - *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE +PSD_PORTA_DIR ) = -PSDA_VDEC_RST |PSDA_VENC_RST ; -/* Deactivate Video en/decoder reset lines */ - *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE +PSD_PORTA_DOUT ) = -PSDA_VDEC_RST |PSDA_VENC_RST ; +/* Set direction bits for Video en/decoder reset as output */ +writeb (PSDA_VDEC_RST |PSDA_VENC_RST ,0x20200000 +PSD_PORTA_DIR ); +/* Deactivate Video en/decoder reset lines */ +writeb (PSDA_VDEC_RST |PSDA_VENC_RST ,0x20200000 +PSD_PORTA_DOUT );return 0 ; } +#ifdef CONFIG_FLASH_CFI_LEGACY +ulong board_flash_get_legacy (ulong base,int banknum,flash_info_t *info) +{ + info->portwidth =FLASH_CFI_16BIT ; + info->chipwidth =2 ; + info->interface =FLASH_CFI_X16 ; +return 1 ; +} +#endif +#ifdef CONFIG_SMC91111 int board_eth_init (bd_t *bis) {
board/bf533-ezkit/flash-defines.h deleted +0 -0
board/bf533-ezkit/flash.c deleted +0 -0
include/configs/bf533-ezkit.h +10 -4
@@ -80,15 +80,21 @@/* -* Flash Settings +* Flash Settings (PSD4256) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_1Mx16#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 3 -#define CONFIG_SYS_MAX_FLASH_SECT 40 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI_AMD_RESET +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_MAX_FLASH_SECT 20 +#define CONFIG_SYS_FLASH_BANKS_LIST { 0x20000000, 0x20100000 } +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR 0x20030000#define CONFIG_ENV_SECT_SIZE 0x10000 -#define FLASH_TOT_SECT 40/*
Signature · 1 line
1.7.9.7
PATCH 1/2 add ST PSD4256G6V to table of supported legacy flashs
In reply to Mike FrysingerQuoted 3 lines · On Tuesday 31 July 2012 09:38:32 Mike Frysinger wrote:
The BF533-EZKIT boards have this old ST flash.
Signed-off-by Mike Frysinger <[email protected]>
Mike, do you intend to push this via your blackfin repo? If yes, then please go ahead. Otherwise I'll queue it up for upstreaming.
Thanks,
Stefan
PATCH 1/2 add ST PSD4256G6V to table of supported legacy flashs
Quoted 9 lines · On Tuesday 31 July 2012 04:50:17 Stefan Roese wrote:
Quoted 3 lines · On Tuesday 31 July 2012 09:38:32 Mike Frysinger wrote:
The BF533-EZKIT boards have this old ST flash.
Signed-off-by Mike Frysinger <[email protected]>Acked-by Stefan Roese <[email protected]>Mike, do you intend to push this via your blackfin repo? If yes, then please go ahead. Otherwise I'll queue it up for upstreaming.
will do, thanks!
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120731/50df9363/attachment.pgp>