Skip to contentSkip to conversation

ath9k: Add PID/VID support for AR1111

PATCH In review Mohammed Shafi Shajakhan 7 participants 11 messages Aug 2, 2012 – Sep 24, 2012 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore

Mohammed Shafi Shajakhan

author
#0 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>
---
 drivers/net/wireless/ath/ath9k/hw.c  |    1 +
 drivers/net/wireless/ath/ath9k/hw.h  |    1 +
 drivers/net/wireless/ath/ath9k/pci.c |    1 +
 3 files changed, 3 insertions(+), 0 deletions(-)
drivers/net/wireless/ath/ath9k/hw.c +1 -0
index cfa91ab..60b6a9d 100644
@@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah)
 	case AR9300_DEVID_QCA955X:
 	case AR9300_DEVID_AR9580:
 	case AR9300_DEVID_AR9462:
+	case AR9485_DEVID_AR1111:
 		break;
 	default:
 		if (common->bus_ops->ath_bus_type == ATH_USB)
drivers/net/wireless/ath/ath9k/hw.h +1 -0
index dd0c146..ce7332c 100644
@@ -49,6 +49,7 @@
 #define AR9300_DEVID_AR9462	0x0034
 #define AR9300_DEVID_AR9330	0x0035
 #define AR9300_DEVID_QCA955X	0x0038
+#define AR9485_DEVID_AR1111	0x0037
 
 #define AR5416_AR9100_DEVID	0x000b
drivers/net/wireless/ath/ath9k/pci.c +1 -0
index 87b89d5..d455de9 100644
@@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
 	{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E  AR9462 */
+	{ PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E  AR1111/AR9485 */
 	{ 0 }
 };
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

Quoted 9 lines · Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Quoted 4 lines
Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>

Nice! I'd be happy with this going in once we get a Tested-by: report. Dan, Tim?

Luis

#2 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

Quoted 11 lines · Luis R. Rodriguez
Quoted 9 lines · Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Quoted 9 lines
Quoted 4 lines
Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>

Nice! I'd be happy with this going in once we get a Tested-by: report. Dan, Tim?

Will test tomorrow when I have time

Signature · 5 lines
Tim and Alison Bentley
Home at TRARBentley.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120802/502456c6/attachment.htm
#3 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

Quoted 18 lines · Tim and Alison Bentley
Quoted 16 lines · Luis R. Rodriguez
Quoted 13 lines · Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>
Quoted 6 lines
Quoted 4 lines

Nice! I'd be happy with this going in once we get a Tested-by: report. Dan, Tim?

Will test tomorrow when I have time

Hmmm...well, I just pushed it to wireless.git. I won't push it to Dave until sometime tomorrow, to give a chance for some test.

John

Signature · 2 lines
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.
#4 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

Quoted 27 lines · John W. Linville
Quoted 1 line · Tim and Alison Bentley

On 2 August 2012 18:43, Luis R. Rodriguez <[email protected]>

Quoted 17 lines · wrote:
Quoted 17 lines
Quoted 13 lines · Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>
Quoted 6 lines
Quoted 4 lines

Nice! I'd be happy with this going in once we get a Tested-by: report. Dan, Tim?

Will test tomorrow when I have time

Quoted 8 lines

Hmmm...well, I just pushed it to wireless.git. I won't push it to Dave until sometime tomorrow, to give a chance for some test.

John
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.

Have tested patch and can confirm it is fine and works. (Connected now). Can you amend the reported by and Tested by lines to
Tim Bentley <[email protected]>
instead of the family email address.
Sorry for any trouble.

Signature · 5 lines
Tim and Alison Bentley
Home at TRARBentley.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120802/e8dae080/attachment-0001.htm
author
#5 lore raw

PATCH 1/1 ath9k: Add PID/VID support for AR1111

Hi Tim/Luis,

Quoted 38 lines · Tim and Alison Bentley
Quoted 27 lines · John W. Linville
Quoted 1 line · Tim and Alison Bentley

On 2 August 2012 18:43, Luis R. Rodriguez <[email protected]>

Quoted 17 lines · wrote:
Quoted 17 lines
Quoted 13 lines · Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <[email protected]>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc stable at vger.kernel.org [2.6.39+]
Cc Felix Bitterli <[email protected]>
Reported-by Tim and Alison Bentley <[email protected]>
Signed-off-by Mohammed Shafi Shajakhan <[email protected]>
Quoted 6 lines
Quoted 4 lines

Nice! I'd be happy with this going in once we get a Tested-by: report. Dan, Tim?

Will test tomorrow when I have time

Quoted 8 lines

Hmmm...well, I just pushed it to wireless.git. I won't push it to Dave until sometime tomorrow, to give a chance for some test.

John
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.

Quoted 6 lines

Have tested patch and can confirm it is fine and works. (Connected now). Can you amend the reported by and Tested by lines to
Tim Bentley <[email protected]>
instead of the family email address.
Sorry for any trouble.

thanks for testing this.

Signature · 2 lines
thanks,
shafi
#6 lore raw

Re: [ath9k-devel] :

In reply to Mohammed Shafi Shajakhan
Quoted 2 lines

Hi

We are using AR9331 and are currently using the device in - AP mode, and Station mode.

We would like to use the device for a P2P application. Can you suggest what we need to do.

Regards,
Sunil.

author
#7 lore raw

Re: [ath9k-devel] :

Hi,

Quoted 8 lines · Sunil Mehta
Quoted 2 lines

Hi

We are using AR9331 and are currently using the device in - AP mode, and Station mode.

We would like to use the device for a P2P application. Can you suggest what we need to do.

sorry for the delayed reply, i was on leave(did not check any mails!) for the past 6 days.

please read this and check this out, if it helps and works for you
http://linuxwireless.org/en/developers/p2p/howto.

please let me know if there any basic configuration issues.

technical issues related to p2p are discussed in hostap mailing lists
http://lists.shmoo.com/mailman/listinfo/hostap

Quoted 5 lines

Regards,
Sunil.

Signature · 2 lines
thanks,
shafi
#8 lore raw

[ath9k-devel] :

Hi,

I am trying to setup concurrent mode for TL-WL722N (TP-LINK) (ath9k) and upgraded& used the driver with the latest compat release. I am trying to run STA & P2P concurrently with two supplicant. Is this configuration possible?

I am using Ubuntu with kernel 3.2

Can you please share the setup you are using to validate the ath9k mac80211 for concurrent mode?

Regards,
Ravi

Quoted 46 lines · Mohammed Shafi Shajakhan

Hi,

Quoted 10 lines · Sunil Mehta
Quoted 3 lines

Hi

We are using AR9331 and are currently using the device in - AP mode, and Station mode.

We would like to use the device for a P2P application. Can you suggest what we need to do.

sorry for the delayed reply, i was on leave(did not check any mails!) for the past 6 days.

please read this and check this out, if it helps and works for you
http://linuxwireless.org/en/developers/p2p/howto.

please let me know if there any basic configuration issues.

technical issues related to p2p are discussed in hostap mailing lists
http://lists.shmoo.com/mailman/listinfo/hostap

Quoted 5 lines

Regards,
Sunil.

--
thanks,
shafi

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#9 lore raw

[ath9k-devel] :

Hi Ravi,

I was on leave, will soon share the complete data that might help you.. p2p concurrency (having P2P go has some issues).

regards,
shafi

Quoted 65 lines · Ravi Sharma

Hi,

I am trying to setup concurrent mode for TL-WL722N (TP-LINK) (ath9k) and upgraded& used the driver with the latest compat release. I am trying to run STA & P2P concurrently with two supplicant. Is this configuration possible?

I am using Ubuntu with kernel 3.2

Can you please share the setup you are using to validate the ath9k mac80211 for concurrent mode?

Regards,
Ravi

Quoted 46 lines · Mohammed Shafi Shajakhan

Hi,

Quoted 10 lines · Sunil Mehta
Quoted 3 lines

Hi

We are using AR9331 and are currently using the device in - AP mode, and Station mode.

We would like to use the device for a P2P application. Can you suggest what we need to do.

sorry for the delayed reply, i was on leave(did not check any mails!) for the past 6 days.

please read this and check this out, if it helps and works for you
http://linuxwireless.org/en/developers/p2p/howto.

please let me know if there any basic configuration issues.

technical issues related to p2p are discussed in hostap mailing lists
http://lists.shmoo.com/mailman/listinfo/hostap

Quoted 5 lines

Regards,
Sunil.

--
thanks,
shafi

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
thanks,
shafi
#10 lore raw

[ath9k-devel] :

In reply to Ravi Sharma
Quoted 6 lines · Ravi Sharma

Hi,

I am trying to setup concurrent mode for TL-WL722N (TP-LINK) (ath9k) and upgraded& used the driver with the latest compat release. I am trying to run STA & P2P concurrently with two supplicant. Is this configuration possible?

yes.
please note you goto add vif1 as a virtual STA interface using interface add command

./wpa_supplicant -i vif1 -c wpa_supplicant/open-con.conf -N -i wlan1
-c ./wpa_supplicant/p2p.conf

http://wireless.kernel.org/en/developers/p2p/howto

PFA

Quoted 4 lines

I am using Ubuntu with kernel 3.2

please use the latest compat, but there are issues with p2p concurrency for p2p-go incase the STA scans

Quoted 59 lines

Can you please share the setup you are using to validate the ath9k mac80211 for concurrent mode?

Regards,
Ravi

Quoted 42 lines · Mohammed Shafi Shajakhan

Hi,

Quoted 10 lines · Sunil Mehta
Quoted 3 lines

Hi

We are using AR9331 and are currently using the device in - AP mode, and Station mode.

We would like to use the device for a P2P application. Can you suggest what we need to do.

sorry for the delayed reply, i was on leave(did not check any mails!) for the past 6 days.

please read this and check this out, if it helps and works for you
http://linuxwireless.org/en/developers/p2p/howto.

please let me know if there any basic configuration issues.

technical issues related to p2p are discussed in hostap mailing lists
http://lists.shmoo.com/mailman/listinfo/hostap

Quoted 5 lines

Regards,
Sunil.

--
thanks,
shafi

Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 16 lines
thanks,
shafi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: open-con.conf
Type: application/octet-stream
Size: 84 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120924/3ab75e3c/attachment.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: p2p.conf
Type: application/octet-stream
Size: 489 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120924/3ab75e3c/attachment-0001.obj