backlight: Add TPS65217 WLED driver
Subsystems (4)
PATCH 1/1 backlight: Add TPS65217 WLED driver
The TPS65217 chip contains a boost converter and current sinks which can be used to drive LEDs for use as backlights. Expose this functionality via the backlight API.
--- drivers/mfd/tps65217.c | 71 +++++++++ drivers/video/backlight/Kconfig | 7 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/tps65217_bl.c | 272 +++++++++++++++++++++++++++++++++ include/linux/mfd/tps65217.h | 19 +++ 5 files changed, 370 insertions(+) create mode 100644 drivers/video/backlight/tps65217_bl.c
drivers/mfd/tps65217.c +71 -0
@@ -29,6 +29,12 @@#include <linux/mfd/core.h> #include <linux/mfd/tps65217.h> +#if defined(CONFIG_BACKLIGHT_TPS65217 ) || defined(CONFIG_BACKLIGHT_TPS65217_MODULE ) +#define tps_has_bl () true +#else +#define tps_has_bl () false +#endif +/** * tps65217_reg_read: Read a single tps65217 register. *
@@ -174,6 +180,47 @@ static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) pdata->of_node[i] = reg_matches[i].of_node; } +if (tps_has_bl ()) { +struct device_node *np =of_find_node_by_name (node,"backlight" ); +if (np) { +u32 val; + + pdata->bl_pdata =devm_kzalloc (&client->dev,sizeof (*pdata->bl_pdata),GFP_KERNEL ); +if (!pdata->bl_pdata) +return NULL ; + +if (!of_property_read_u32 (np,"isel" , &val)) { +if (val ==1 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }else if (val ==2 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET2 ; + }else { +dev_err (&client->dev,"invalid value for backlight current limit selection in the device tree\n" ); +return NULL ; + } + }else { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + } + +if (!of_property_read_u32 (np,"fdim" , &val)) { +if (val ==100 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_100HZ ; + }else if (val ==200 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + }else if (val ==500 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_500HZ ; + }else if (val ==1000 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_1000HZ ; + }else { +dev_err (&client->dev,"invalid value for backlight dimming frequency in the device tree\n" ); +return NULL ; + } + }else { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + } + } + } +return pdata; }
@@ -250,7 +297,28 @@ static int __devinit tps65217_probe(struct i2c_client *client,platform_device_add (pdev); } +if (tps_has_bl () && + pdata->bl_pdata) { + tps->bl_pdev =platform_device_alloc ("tps65217-bl" ,0 ); +if (!tps->bl_pdev) { +dev_err (tps->dev,"Cannot create backlight platform device\n" ); + ret = -ENOMEM ; + goto err_alloc_bl_pdev; + } + + tps->bl_pdev->dev.parent = tps->dev; + tps->bl_pdev->dev.platform_data = pdata->bl_pdata; + +platform_device_add (tps->bl_pdev); + } +return 0 ; + +err_alloc_bl_pdev: +for (i =0 ; i <TPS65217_NUM_REGULATOR ; i++) +platform_device_unregister (tps->regulator_pdev[i]); + +return ret; } static int __devexit tps65217_remove(struct i2c_client *client)
@@ -258,6 +326,9 @@ static int __devexit tps65217_remove(struct i2c_client *client)struct tps65217 *tps =i2c_get_clientdata (client);int i; +if (tps->bl_pdev) +platform_device_unregister (tps->bl_pdev); +for (i =0 ; i <TPS65217_NUM_REGULATOR ; i++)platform_device_unregister (tps->regulator_pdev[i]);
drivers/video/backlight/Kconfig +7 -0
@@ -373,6 +373,13 @@ config BACKLIGHT_PANDORA If you have a Pandora console, say Y to enable the backlight driver. +config BACKLIGHT_TPS65217 + tristate "Backlight driver for TI TPS65217 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT
drivers/video/backlight/Makefile +1 -0
@@ -43,3 +43,4 @@ obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o +obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
drivers/video/backlight/tps65217_bl.c new file +272 -0
272 lines not on this page · raw message
include/linux/mfd/tps65217.h +19 -0
@@ -210,6 +210,23 @@ enum tps65217_regulator_id {/* Number of total regulators available */ #define TPS65217_NUM_REGULATOR (TPS65217_NUM_DCDC + TPS65217_NUM_LDO) +enum tps65217_bl_isel { +TPS65217_BL_ISET1 , +TPS65217_BL_ISET2 , +}; + +enum tps65217_bl_fdim { +TPS65217_BL_FDIM_100HZ , +TPS65217_BL_FDIM_200HZ , +TPS65217_BL_FDIM_500HZ , +TPS65217_BL_FDIM_1000HZ , +}; + +struct tps65217_bl_pdata { +enum tps65217_bl_isel isel; +enum tps65217_bl_fdim fdim; +}; +/** * struct tps65217_board - packages regulator init data * @tps65217_regulator_data: regulator initialization values
@@ -219,6 +236,7 @@ enum tps65217_regulator_id {struct tps65217_board {struct regulator_init_data *tps65217_init_data[TPS65217_NUM_REGULATOR ];struct device_node *of_node[TPS65217_NUM_REGULATOR ]; +struct tps65217_bl_pdata *bl_pdata; };/**
@@ -255,6 +273,7 @@ struct tps65217 {/* Client devices */ struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR ]; +struct platform_device *bl_pdev; };static inline struct tps65217 *dev_to_tps65217 (struct device *dev)
Signature · 1 line
1.7.10
Hi Kaehlcke,
Can you re-submit the patch based on linux-next tree?
Comments inline
Quoted 3 lines · Matthias Kaehlcke
The TPS65217 chip contains a boost converter and current sinks which can be used to drive LEDs for use as backlights. Expose this functionality via the backlight API.
Can you provide more details here, like patch is based on which tree? Testing details of the driver?
Quoted 16 lines
Signed-off-by Matthias Kaehlcke <[email protected]>--- drivers/mfd/tps65217.c | 71 +++++++++ drivers/video/backlight/Kconfig | 7 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/tps65217_bl.c | 272 +++++++++++++++++++++++++++++++++ include/linux/mfd/tps65217.h | 19 +++ 5 files changed, 370 insertions(+) create mode 100644 drivers/video/backlight/tps65217_bl.cdrivers/mfd/tps65217.c +0
-0
drivers/mfd/tps65217.c line 37
Quoted 9 lines
drivers/mfd/tps65217.c +6
-0@@ -29,6 +29,12 @@#include <linux/mfd/core.h> #include <linux/mfd/tps65217.h> +#if defined(CONFIG_BACKLIGHT_TPS65217 ) || defined(CONFIG_BACKLIGHT_TPS65217_MODULE ) +#define tps_has_bl () true +#else +#define tps_has_bl () false +#endif +
Is this really required?
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 185
Quoted 10 lines
drivers/mfd/tps65217.c +3
-0/** * tps65217_reg_read: Read a single tps65217 register. * @@ -174,6 +180,47 @@ static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) pdata->of_node[i] = reg_matches[i].of_node; } +if (tps_has_bl ()) { +struct device_node *np =of_find_node_by_name (node,"backlight" ); +if (np) {
This can be changed to
np = of_find_node_by_name(node, "backlight");
if (np) {
}
else fall into non-backlight case.
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 198
Quoted 13 lines
drivers/mfd/tps65217.c +13
-0+u32 val; + + pdata->bl_pdata =devm_kzalloc (&client->dev,sizeof (*pdata->bl_pdata),GFP_KERNEL ); +if (!pdata->bl_pdata) +return NULL ; + +if (!of_property_read_u32 (np,"isel" , &val)) { +if (val ==1 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }else if (val ==2 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET2 ; + }else { +dev_err (&client->dev,"invalid value for backlight current limit selection in the device tree\n" );
fix checkpatch.pl errors before submitting the patches. More than 80 ch.
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 199
Quoted 1 line
drivers/mfd/tps65217.c +1
-0+return NULL ;
Should not return here, need to handle rest of dt portion.
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 203
Quoted 4 lines
drivers/mfd/tps65217.c +4
-0+ } + }else { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }
This can be changed to
pdata->bl_pdata->isel = TPS65217_BL_ISET1;of_property_read_u32(np, "isel", &val)
if (val > TPS65217_BL_ISET2 || val < TPS65217_BL_ISET1) {
dev_err(...);
goto rest_dt_portion;
} else {
pdata->bl_pdata->isel = val;
}Quoted 9 lines
drivers/mfd/tps65217.c +9
-0+ +if (!of_property_read_u32 (np,"fdim" , &val)) { +if (val ==100 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_100HZ ; + }else if (val ==200 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + }else if (val ==500 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_500HZ ; + }else if (val ==1000 ) {
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 222
Quoted 10 lines
drivers/mfd/tps65217.c +10
-0+ pdata->bl_pdata->fdim =TPS65217_BL_FDIM_1000HZ ; + }else { +dev_err (&client->dev,"invalid value for backlight dimming frequency in the device tree\n" ); +return NULL ; + } + }else { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + } + } + }
Same here.
Quoted 104 lines
drivers/mfd/tps65217.c +25
-0+return pdata; }@@ -250,7 +297,28 @@ static int __devinit tps65217_probe(struct i2c_client *client,platform_device_add (pdev); } +if (tps_has_bl () && + pdata->bl_pdata) { + tps->bl_pdev =platform_device_alloc ("tps65217-bl" ,0 ); +if (!tps->bl_pdev) { +dev_err (tps->dev,"Cannot create backlight platform device\n" ); + ret = -ENOMEM ; + goto err_alloc_bl_pdev; + } + + tps->bl_pdev->dev.parent = tps->dev; + tps->bl_pdev->dev.platform_data = pdata->bl_pdata; + +platform_device_add (tps->bl_pdev); + } +return 0 ; + +err_alloc_bl_pdev: +for (i =0 ; i <TPS65217_NUM_REGULATOR ; i++) +platform_device_unregister (tps->regulator_pdev[i]); + +return ret; } static int __devexit tps65217_remove(struct i2c_client *client)@@ -258,6 +326,9 @@ static int __devexit tps65217_remove(struct i2c_client *client)struct tps65217 *tps =i2c_get_clientdata (client);int i; +if (tps->bl_pdev) +platform_device_unregister (tps->bl_pdev); +for (i =0 ; i <TPS65217_NUM_REGULATOR ; i++)platform_device_unregister (tps->regulator_pdev[i]);drivers/video/backlight/Kconfig +7
-0@@ -373,6 +373,13 @@ config BACKLIGHT_PANDORA If you have a Pandora console, say Y to enable the backlight driver. +config BACKLIGHT_TPS65217 + tristate "Backlight driver for TI TPS65217 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORTdrivers/video/backlight/Makefile +1
-0@@ -43,3 +43,4 @@ obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o +obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.odrivers/video/backlight/tps65217_bl.c new file +28
-0@@ -0,0 +1,272 @@ +/* +* tps65217_bl.c +* +* TPS65217 backlight driver +* +* Copyright (C) 2012 Matthias Kaehlcke +* Author: Matthias Kaehlcke <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +* +* This program is distributed "as is" WITHOUT ANY WARRANTY of any +* kind, whether express or implied; without even the implied warranty +* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/mfd/tps65217.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct tps65217_bl
drivers/video/backlight/tps65217_bl.c line 38
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+{ +struct tps65217 *tps; +struct device *dev; +struct backlight_device *bl; +int on; +}; + +struct tps65217_bl_pdata tps65217_bl_default_pdata = { + .isel =TPS65217_BL_ISET1 , + .fdim =TPS65217_BL_FDIM_200HZ
Comma missed at the end, if some other parameters added to this struct after some time then this line should be updated. Which is not necessary if we take care now.
Quoted 83 lines
drivers/video/backlight/tps65217_bl.c new file +83
-0+}; + +static int tps65217_bl_enable (struct tps65217_bl *tps65217_bl) +{ +int rc; + + rc =tps65217_set_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_ISINK_ENABLE , +TPS65217_WLEDCTRL1_ISINK_ENABLE , +TPS65217_PROTECT_NONE ); +if (rc) { +dev_err (tps65217_bl->dev, +"failed to enable backlight: %d\n" , rc); +return rc; + } + + tps65217_bl->on =1 ; + +dev_dbg (tps65217_bl->dev,"backlight enabled\n" ); + +return 0 ; +} + +static int tps65217_bl_disable (struct tps65217_bl *tps65217_bl) +{ +int rc; + + rc =tps65217_clear_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_ISINK_ENABLE , +TPS65217_PROTECT_NONE ); +if (rc) { +dev_err (tps65217_bl->dev, +"failed to disable backlight: %d\n" , rc); +return rc; + } + + tps65217_bl->on =0 ; + +dev_dbg (tps65217_bl->dev,"backlight disabled\n" ); + +return 0 ; +} + +static int tps65217_bl_update_status (struct backlight_device *bl) +{ +struct tps65217_bl *tps65217_bl =bl_get_data (bl); +int rc; +int brightness = bl->props.brightness; + +if (bl->props.state &BL_CORE_SUSPENDED ) + brightness =0 ; + +if ((bl->props.power !=FB_BLANK_UNBLANK ) || + (bl->props.fb_blank !=FB_BLANK_UNBLANK )) +/* framebuffer in low power mode or blanking active */ + brightness =0 ; + +if (brightness >0 ) { + rc =tps65217_reg_write (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL2 , + brightness -1 , +TPS65217_PROTECT_NONE ); +if (rc) { +dev_err (tps65217_bl->dev, +"failed to set brightness level: %d\n" , rc); +return rc; + } + +dev_dbg (tps65217_bl->dev,"brightness set to %d\n" , brightness); + +if (!tps65217_bl->on) + rc =tps65217_bl_enable (tps65217_bl); + }else { + rc =tps65217_bl_disable (tps65217_bl); + } + +return rc; +} + +static int tps65217_bl_get_brightness (struct backlight_device *bl) +{
drivers/video/backlight/tps65217_bl.c line 131
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+return bl->props.brightness; +} + +static const struct backlight_ops tps65217_bl_ops = { + .options =BL_CORE_SUSPENDRESUME , + .update_status = tps65217_bl_update_status, + .get_brightness = tps65217_bl_get_brightness +}; + +static int tps65217_bl_hw_init (struct tps65217_bl *tps65217_bl,struct tps65217_bl_pdata *pdata)
Greater than 80 Chs
Quoted 17 lines
drivers/video/backlight/tps65217_bl.c new file +17
-0+{ +int rc; + + rc =tps65217_bl_disable (tps65217_bl); +if (rc) +return rc; + +if (pdata->isel ==TPS65217_BL_ISET1 ) { +/* select ISET_1 current level */ + rc =tps65217_clear_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_ISEL , +TPS65217_PROTECT_NONE ); +if (rc) { +dev_err (tps65217_bl->dev, +"failed to select ISET1 current level: %d)\n" , rc); +return rc;
drivers/video/backlight/tps65217_bl.c line 158
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+ } + +dev_dbg (tps65217_bl->dev,"selected ISET1 current level\n" ); + }else { +/* select ISET2 current level */ + rc =tps65217_set_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_ISEL , +TPS65217_WLEDCTRL1_ISEL , +TPS65217_PROTECT_NONE );
Can reduce number of lines and should not exceed 80 ch. Same can be done at other places.
drivers/video/backlight/tps65217_bl.c line 166
Quoted 8 lines
drivers/video/backlight/tps65217_bl.c new file +8
-0+if (rc) { +dev_err (tps65217_bl->dev, +"failed to select ISET2 current level: %d\n" , rc); +return rc; + } + +dev_dbg (tps65217_bl->dev,"selected ISET2 current level\n" ); + }
Switch gives better readability.
Quoted 25 lines
drivers/video/backlight/tps65217_bl.c new file +25
-0+ +/* set PWM frequency */ + rc =tps65217_set_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_FDIM_MASK , + pdata->fdim, +TPS65217_PROTECT_NONE ); +if (rc) { +dev_err (tps65217_bl->dev, +"failed to select PWM dimming frequency: %d\n" , rc); +return rc; + } + +return 0 ; +} + +static int tps65217_bl_probe (struct platform_device *pdev) +{ +int rc; +struct i2c_client *i2c_client =to_i2c_client (pdev->dev.parent); +struct tps65217 *tps =i2c_get_clientdata (i2c_client); +struct tps65217_bl *tps65217_bl; +struct tps65217_bl_pdata *pdata; +struct backlight_properties bl_props; +
drivers/video/backlight/tps65217_bl.c line 201
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+ tps65217_bl =kzalloc (GFP_KERNEL ,sizeof (*tps65217_bl)); +if (tps65217_bl ==NULL ) { +dev_err (&pdev->dev,"allocation of struct tps65217_bl failed\n" ); +return -ENOMEM ; + } + + tps65217_bl->tps = tps; + tps65217_bl->dev = &pdev->dev; + tps65217_bl->on =0 ; +
DT handling for backlight should be done here.
Quoted 28 lines
drivers/video/backlight/tps65217_bl.c new file +28
-0+if (pdev->dev.platform_data) + pdata = pdev->dev.platform_data; +else + pdata = &tps65217_bl_default_pdata; + + rc =tps65217_bl_hw_init (tps65217_bl, pdata); +if (rc) + goto err_bl_hw_init; + +memset (&bl_props,0 ,sizeof (struct backlight_properties )); + bl_props.type =BACKLIGHT_RAW ; + bl_props.max_brightness =100 ; + + tps65217_bl->bl =backlight_device_register (pdev->name, + tps65217_bl->dev, + tps65217_bl, + &tps65217_bl_ops, + &bl_props); +if (IS_ERR (tps65217_bl->bl)) { + rc =PTR_ERR (tps65217_bl->bl); +dev_err (tps65217_bl->dev,"registration of backlight device failed: %d\n" , rc); + goto err_reg_bl; + } + + tps65217_bl->bl->props.brightness =0 ; + +return 0 ; +
drivers/video/backlight/tps65217_bl.c line 239
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+err_reg_bl: +err_bl_hw_init: +kfree (tps65217_bl); + +return rc; +} + +static int tps65217_bl_remove (struct platform_device *pdev) +{ +struct tps65217_bl *tps65217_bl = (struct tps65217_bl *)platform_get_drvdata (pdev);
type cast is not required.
Quoted 22 lines
drivers/video/backlight/tps65217_bl.c new file +22
-0+ +backlight_device_unregister (tps65217_bl->bl); + +kfree (tps65217_bl); + +return 0 ; +} + +static struct platform_driver tps65217_bl_driver = { + .probe = tps65217_bl_probe, + .remove = tps65217_bl_remove, + .driver = { + .owner =THIS_MODULE , + .name ="tps65217-bl" , + }, +}; + +static int __init tps65217_bl_init (void ) +{ +return platform_driver_register (&tps65217_bl_driver); +} +
drivers/video/backlight/tps65217_bl.c line 271
Quoted 10 lines
drivers/video/backlight/tps65217_bl.c new file +10
-0+static void __exit tps65217_bl_exit(void) +{ +platform_driver_unregister (&tps65217_bl_driver); +} + +module_init (tps65217_bl_init); +module_exit (tps65217_bl_exit); + +MODULE_DESCRIPTION ("TPS65217 Backlight driver" ); +MODULE_LICENSE ("GPL" );
GPLv2
Regards
AnilKumar
Hi AnilKumar,
thanks for your comments
El Tue, Aug 07, 2012 at 08:59:17AM +0000 AnilKumar, Chimata ha dit:
Quoted 1 line
Can you re-submit the patch based on linux-next tree?
will do
Quoted 9 lines
Comments inline
Quoted 3 lines · Matthias Kaehlcke
The TPS65217 chip contains a boost converter and current sinks which can be used to drive LEDs for use as backlights. Expose this functionality via the backlight API.
Can you provide more details here, like patch is based on which tree?
this patch was based on current mainline at the time of submission
Quoted 1 line
Testing details of the driver?
the driver has been tested (without device tree) on a custom AM335x board, running an Androidized 3.2 kernel with AM335x support (rowboat project)
Quoted 8 lines
drivers/mfd/tps65217.c line 37
Quoted 6 lines
drivers/mfd/tps65217.c +6
-0+#if defined(CONFIG_BACKLIGHT_TPS65217 ) || defined(CONFIG_BACKLIGHT_TPS65217_MODULE ) +#define tps_has_bl () true +#else +#define tps_has_bl () false +#endif +Is this really required?
was inspired by the twl-core driver, but can do without it
Quoted 16 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 185
Quoted 10 lines
/**
*tps65217_reg_read: Read a single tps65217 register. *drivers/mfd/tps65217.c +3
-0@@ -174,6 +180,47 @@ static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) pdata->of_node[i] = reg_matches[i].of_node; } +if (tps_has_bl ()) { +struct device_node *np =of_find_node_by_name (node,"backlight" ); +if (np) {This can be changed to
np =of_find_node_by_name(node, "backlight");
if (np) {
}
Quoted 1 line
else fall into non-backlight case.
ok
Quoted 8 lines
Quoted 8 lines
drivers/mfd/tps65217.c +8
-0+u32 val; + + pdata->bl_pdata =devm_kzalloc (&client->dev,sizeof (*pdata->bl_pdata),GFP_KERNEL ); +if (!pdata->bl_pdata) +return NULL ; + +if (!of_property_read_u32 (np,"isel" , &val)) { +if (val ==1 ) {
Quoted 8 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 198
Quoted 5 lines
drivers/mfd/tps65217.c +5
-0+ pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }else if (val ==2 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET2 ; + }else { +dev_err (&client->dev,"invalid value for backlight current limit selection in the device tree\n" );fix checkpatch.pl errors before submitting the patches. More than 80 ch.
in this case it will be hard to read the 80 character limit without modifying the log string or breaking it artifically into several lines. i understand the 80 character limit is a soft limit, which can be violated if readability is actually improve by the violation. i'd suggest to make the line slightly shorter by putting the log string in it's own line, but not break the string in between just to reach the 80 char limit
Quoted 3 lines
Review static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 199
Quoted 1 line
(quoted diff) +1
-0+ return NULL;Should not return here, need to handle rest of dt portion.
ok
Quoted 7 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 203
Quoted 4 lines
drivers/mfd/tps65217.c +4
-0+ } + }else { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }This can be changed to
Quoted 8 lines
pdata->bl_pdata->isel=TPS65217_BL_ISET1;of_property_read_u32(np, "isel", &val)if (val > TPS65217_BL_ISET2 || val < TPS65217_BL_ISET1) { dev_err(...); goto rest_dt_portion; } else { pdata->bl_pdata->isel = val; }
ok, this also requires the TPS65217_BL_ISETx enum to start at 1
Quoted 13 lines
Quoted 13 lines
drivers/mfd/tps65217.c +13
-0+ +if (!of_property_read_u32 (np,"fdim" , &val)) { +if (val ==100 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_100HZ ; + }else if (val ==200 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + }else if (val ==500 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_500HZ ; + }else if (val ==1000 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_1000HZ ; + }else { +dev_err (&client->dev,"invalid value for backlight dimming frequency in the device tree\n" ); +return NULL ;
Quoted 8 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 221
Quoted 6 lines
drivers/mfd/tps65217.c +6
-0+ } + }else { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + } + } + }Same here.
not exactly, the value specified in the device tree for the dimming frequency will be a frequency, not a value corresponding to the enum, so a range check + assignment isn't enough. if you'd like to see a similar handling an option would be to set TPS65217_BL_FDIM_100HZ to 100, TPS..._200HZ to 200, ..., and do:
switch (val) {
case TPS65217_BL_FDIM_100HZ:
case TPS65217_BL_FDIM_200HZ:
...
pdata->bl_pdata->fdim = val;
break;default:
/* error handling */ }
Quoted 7 lines
drivers/video/backlight/tps65217_bl.c line 38
Quoted 3 lines
drivers/video/backlight/tps65217_bl.c new file +3
-0+struct tps65217_bl_pdata tps65217_bl_default_pdata = { + .isel =TPS65217_BL_ISET1 , + .fdim =TPS65217_BL_FDIM_200HZ Comma missed at the end, if some other parameters added to this struct after some time then this line should be updated. Which is not necessary if we take care now.
ok
Quoted 3 lines
drivers/video/backlight/tps65217_bl.c line 131
Quoted 1 line
drivers/video/backlight/tps65217_bl.c new file +1
-0+static int tps65217_bl_hw_init (struct tps65217_bl *tps65217_bl,struct tps65217_bl_pdata *pdata)Greater than 80 Chs
ok
Quoted 9 lines
drivers/video/backlight/tps65217_bl.c line 158
Quoted 6 lines
drivers/video/backlight/tps65217_bl.c new file +6
-0+/* select ISET2 current level */ + rc =tps65217_set_bits (tps65217_bl->tps, +TPS65217_REG_WLEDCTRL1 , +TPS65217_WLEDCTRL1_ISEL , +TPS65217_WLEDCTRL1_ISEL , +TPS65217_PROTECT_NONE );Can reduce number of lines and should not exceed 80 ch. Same can be done at other places.
ok
Quoted 11 lines
drivers/video/backlight/tps65217_bl.c line 166
Quoted 9 lines
drivers/video/backlight/tps65217_bl.c new file +8
-0+if (rc) { +dev_err (tps65217_bl->dev, +"failed to select ISET2 current level: %d\n" , rc); +return rc; + } + +dev_dbg (tps65217_bl->dev,"selected ISET2 current level\n" ); + }Switch gives better readability.
ok
Quoted 13 lines
Quoted 13 lines
drivers/video/backlight/tps65217_bl.c new file +13
-0+static int tps65217_bl_probe (struct platform_device *pdev) +{ +int rc; +struct i2c_client *i2c_client =to_i2c_client (pdev->dev.parent); +struct tps65217 *tps =i2c_get_clientdata (i2c_client); +struct tps65217_bl *tps65217_bl; +struct tps65217_bl_pdata *pdata; +struct backlight_properties bl_props; + + tps65217_bl =kzalloc (GFP_KERNEL ,sizeof (*tps65217_bl)); +if (tps65217_bl ==NULL ) { +dev_err (&pdev->dev,"allocation of struct tps65217_bl failed\n" ); +return -ENOMEM ;
Quoted 8 lines
drivers/video/backlight/tps65217_bl.c line 201
Quoted 6 lines
drivers/video/backlight/tps65217_bl.c new file +6
-0+ } + + tps65217_bl->tps = tps; + tps65217_bl->dev = &pdev->dev; + tps65217_bl->on =0 ; +DT handling for backlight should be done here.
ok
Quoted 5 lines
drivers/video/backlight/tps65217_bl.c line 239
Quoted 3 lines
drivers/video/backlight/tps65217_bl.c new file +3
-0+static int tps65217_bl_remove (struct platform_device *pdev) +{ +struct tps65217_bl *tps65217_bl = (struct tps65217_bl *)platform_get_drvdata (pdev);type cast is not required.
ok
Quoted 3 lines
Quoted 1 line
+MODULE_LICENSE("GPL");
GPLv2
ok
best regards
Signature · 10 lines
Matthias Kaehlcke
Embedded Linux Developer
Amsterdam
La guerra es un acto abominable en el que se matan personas que no
se conocen, dirigidas por personas que se conocen y no se matan
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-Hi Kaehlcke,
Quoted 9 lines · Matthias Kaehlcke
Hi AnilKumar,
thanks for your comments
El Tue, Aug 07, 2012 at 08:59:17AM +0000 AnilKumar, Chimata ha dit:
Quoted 1 line
Can you re-submit the patch based on linux-next tree?
will do
Cross check with mfd/master also.
Quoted 11 lines
Quoted 10 lines
Comments inline
Quoted 3 lines · Matthias Kaehlcke
The TPS65217 chip contains a boost converter and current sinks which can be used to drive LEDs for use as backlights. Expose this functionality via the backlight API.
Can you provide more details here, like patch is based on which tree?
Quoted 7 lines
this patch was based on current mainline at the time of submission
Quoted 1 line
Testing details of the driver?
the driver has been tested (without device tree) on a custom AM335x board, running an Androidized 3.2 kernel with AM335x support (rowboat project)
Mention this is patch description.
Quoted 49 lines
Quoted 9 lines
drivers/mfd/tps65217.c line 37
Quoted 7 lines
drivers/mfd/tps65217.c +6
-0+#if defined(CONFIG_BACKLIGHT_TPS65217 ) || defined(CONFIG_BACKLIGHT_TPS65217_MODULE ) +#define tps_has_bl () true +#else +#define tps_has_bl () false +#endif +Is this really required?
was inspired by the twl-core driver, but can do without it
Quoted 16 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 185
Quoted 10 lines
/**
*tps65217_reg_read: Read a single tps65217 register. *drivers/mfd/tps65217.c +3
-0@@ -174,6 +180,47 @@ static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) pdata->of_node[i] = reg_matches[i].of_node; } +if (tps_has_bl ()) { +struct device_node *np =of_find_node_by_name (node,"backlight" ); +if (np) {This can be changed to
np =of_find_node_by_name(node, "backlight");
if (np) {
}Quoted 1 line
else fall into non-backlight case.
ok
Quoted 8 lines
Quoted 8 lines
drivers/mfd/tps65217.c +8
-0+u32 val; + + pdata->bl_pdata =devm_kzalloc (&client->dev,sizeof (*pdata->bl_pdata),GFP_KERNEL ); +if (!pdata->bl_pdata) +return NULL ; + +if (!of_property_read_u32 (np,"isel" , &val)) { +if (val ==1 ) {Quoted 8 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 198
Quoted 5 lines
drivers/mfd/tps65217.c +5
-0+ pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }else if (val ==2 ) { + pdata->bl_pdata->isel =TPS65217_BL_ISET2 ; + }else { +dev_err (&client->dev,"invalid value for backlight current limit selection in the device tree\n" );fix checkpatch.pl errors before submitting the patches. More than 80 ch.
Quoted 7 lines
in this case it will be hard to read the 80 character limit without modifying the log string or breaking it artifically into several lines. i understand the 80 character limit is a soft limit, which can be violated if readability is actually improve by the violation. i'd suggest to make the line slightly shorter by putting the log string in it's own line, but not break the string in between just to reach the 80 char limit
I am leaving it to maintainer
Quoted 57 lines
Quoted 4 lines
Review static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 199
Quoted 2 lines
(quoted diff) +1
-0+ return NULL;Should not return here, need to handle rest of dt portion.
ok
Quoted 7 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 203
Quoted 4 lines
drivers/mfd/tps65217.c +4
-0+ } + }else { + pdata->bl_pdata->isel =TPS65217_BL_ISET1 ; + }This can be changed to
Quoted 8 lines
pdata->bl_pdata->isel=TPS65217_BL_ISET1;of_property_read_u32(np, "isel", &val)if (val > TPS65217_BL_ISET2 || val < TPS65217_BL_ISET1) { dev_err(...); goto rest_dt_portion; } else { pdata->bl_pdata->isel = val; }ok, this also requires the
TPS65217_BL_ISETxenum to start at 1Quoted 13 lines
Quoted 13 lines
drivers/mfd/tps65217.c +13
-0+ +if (!of_property_read_u32 (np,"fdim" , &val)) { +if (val ==100 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_100HZ ; + }else if (val ==200 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + }else if (val ==500 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_500HZ ; + }else if (val ==1000 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_1000HZ ; + }else { +dev_err (&client->dev,"invalid value for backlight dimming frequency in the device tree\n" ); +return NULL ;Quoted 8 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 221
Quoted 6 lines
drivers/mfd/tps65217.c +6
-0+ } + }else { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + } + } + }Same here.
not exactly, the value specified in the device tree for the dimming frequency will be a frequency, not a value corresponding to the enum, so a range check + assignment isn't enough. if you'd like to see a similar handling an option would be to set
TPS65217_BL_FDIM_100HZto 100, TPS..._200HZ to 200, ..., and do:switch (val) {
caseTPS65217_BL_FDIM_100HZ:
caseTPS65217_BL_FDIM_200HZ:
...
Quoted 7 lines
pdata->bl_pdata->fdim = val; break;default:
/* error handling */ }
This looks better.
Regards
AnilKumar
Hi AnilKumar,
El Wed, Aug 08, 2012 at 09:25:29AM +0000 AnilKumar, Chimata ha dit:
Quoted 1 line
Cross check with mfd/master also.
ok
Quoted 34 lines
Quoted 34 lines
Quoted 12 lines
Quoted 12 lines
drivers/mfd/tps65217.c +12
-0+if (!of_property_read_u32 (np,"fdim" , &val)) { +if (val ==100 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_100HZ ; + }else if (val ==200 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + }else if (val ==500 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_500HZ ; + }else if (val ==1000 ) { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_1000HZ ; + }else { +dev_err (&client->dev,"invalid value for backlight dimming frequency in the device tree\n" ); +return NULL ;Quoted 8 lines
drivers/mfd/tps65217.c static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) · line 221
Quoted 6 lines
drivers/mfd/tps65217.c +6
-0+ } + }else { + pdata->bl_pdata->fdim =TPS65217_BL_FDIM_200HZ ; + } + } + }Same here.
not exactly, the value specified in the device tree for the dimming frequency will be a frequency, not a value corresponding to the enum, so a range check + assignment isn't enough. if you'd like to see a similar handling an option would be to set
TPS65217_BL_FDIM_100HZto 100, TPS..._200HZ to 200, ..., and do:switch (val) {
caseTPS65217_BL_FDIM_100HZ:
caseTPS65217_BL_FDIM_200HZ:
...pdata->bl_pdata->fdim = val; break;
Quoted 6 lines
Quoted 4 lines
default:
/* error handling */ }This looks better.
taking a closer look i noticed that unfortunately it won't work that way, as the constants TPS65217_BL_FDIM_*HZ are the values which are written to the WLEDCTRL1 registers
so the outcome will be:
switch (val) {
case 100:
pdata->bl_pdata->fdim = TPS65217_BL_FDIM_100HZ;
break;
case 200:...
default:
/* error handling */
}or the initial solution, which is slightly shorter, but i think you prefer the switch construct
regards
Signature · 12 lines
Matthias Kaehlcke
Embedded Linux Developer
Amsterdam
Programming is not just an act of telling a computer what to do:
it is also an act of telling other programmers what you wished the
computer to do. Both are important, and the latter deserves care
(Andrew Morton)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-