Fix problems about handling bio to plug when bio merged failed.
cover Fix problems about handling bio to plug when bio merged failed.
There are some problems about handling bio which merge to plug failed. Patch1 will avoid unnecessary plug should_sort test,although it's not a bug. Patch2 correct a bug when handle more devices,it leak some devices to trace plug-operation.
Because the patch2,so it's not necessary to sort when flush plug.Although patch2 has O(n*n) complexity,it's more than list_sort which has O(nlog(n)) complexity.But the plug list is unlikely too long,so i think patch3 can accept.
Jianpeng Ma (3):
block: avoid unnecessary plug should_sort test.
block: Fix not tracing all device plug-operation.
block: Remove unnecessary requests sort.
block/blk-core.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-)
Signature · 2 lines
1.7.9.5
�翳簕.n�+壏煯壄�+%娝�遍荻w�簕.n�+壏{炳G珴�妠ay� 蕠跈�,jf＂穐殢飦�戧鐉_璁(殠娸"濟�m���G珴�⒏?櫒璀�&ｘ忈秈O曟瑉窔v豝�m��� �鹅�⒏?朓�On 2012-08-10 19:44 Jianpeng Ma <[email protected]> Wrote:
Quoted 9 lines
There are some problems about handling bio which merge to plug failed. Patch1 will avoid unnecessary plug
should_sorttest,although it's not a bug. Patch2 correct a bug when handle more devices,it leak some devices to trace plug-operation.Because the patch2,so it's not necessary to sort when flush plug.Although patch2 has
O(n*n)complexity,it's more thanlist_sortwhich has O(nlog(n)) complexity.But the plug list is unlikely too long,so i think patch3 can accept.
Quoted 10 lines
Jianpeng Ma (3):
block: avoid unnecessary plugshould_sorttest.
block: Fix not tracing all device plug-operation.
block: Remove unnecessary requests sort.
block/blk-core.c| 35 ++++++++++++++++++-----------------1 file changed, 18 insertions(+), 17 deletions(-)Signature · 1 line
1.7.9.5
Hi axboe:
Sorry for asking you again. But I found a problem which it contained those code. So i asked how those patchset again.
If you discard those,i will send the patch using the old code. On the other hand,I will wait the patchest release and to continue.
The problem is about blk_plug.
My workload is raid5 which had 16 disks. And used our filesystem to write used direct mode. I used the blktrace to find those message:
8,16 0 3570 1.083923979 2519 I W 144323176 + 24 [md127_raid5] 8,16 0 0 1.083926214 0 m N cfq2519 insert_request 8,16 0 3571 1.083926586 2519 I W 144323072 + 104 [md127_raid5] 8,16 0 0 1.083926952 0 m N cfq2519 insert_request 8,16 0 3572 1.083927180 2519 U N [md127_raid5] 2 8,16 0 0 1.083927870 0 m N cfq2519 Not idling. st->count:1 8,16 0 0 1.083928320 0 m N cfq2519 dispatch_insert 8,16 0 0 1.083928951 0 m N cfq2519 dispatched a request 8,16 0 0 1.083929443 0 m N cfq2519 activate rq, drv=1 8,16 0 3573 1.083929530 2519 D W 144323176 + 24 [md127_raid5] 8,16 0 0 1.083933883 0 m N cfq2519 Not idling. st->count:1 8,16 0 0 1.083934189 0 m N cfq2519 dispatch_insert 8,16 0 0 1.083934654 0 m N cfq2519 dispatched a request 8,16 0 0 1.083935014 0 m N cfq2519 activate rq, drv=2 8,16 0 3574 1.083935101 2519 D W 144323072 + 104 [md127_raid5] 8,16 0 3575 1.084196179 0 C W 144323176 + 24 [0] 8,16 0 0 1.084197979 0 m N cfq2519 complete rqnoidle 0 8,16 0 3576 1.084769073 0 C W 144323072 + 104 [0] ...... 8,16 1 3596 1.091394357 2519 I W 144322544 + 16 [md127_raid5] 8,16 1 0 1.091396181 0 m N cfq2519 insert_request 8,16 1 3597 1.091396571 2519 I W 144322520 + 24 [md127_raid5] 8,16 1 0 1.091396934 0 m N cfq2519 insert_request 8,16 1 3598 1.091397165 2519 I W 144322488 + 32 [md127_raid5] 8,16 1 0 1.091397477 0 m N cfq2519 insert_request 8,16 1 3599 1.091397708 2519 I W 144322432 + 56 [md127_raid5] 8,16 1 0 1.091398023 0 m N cfq2519 insert_request 8,16 1 3600 1.091398284 2519 U N [md127_raid5] 4 8,16 1 0 1.091398986 0 m N cfq2519 Not idling. st->count:1 8,16 1 0 1.091399511 0 m N cfq2519 dispatch_insert 8,16 1 0 1.091400217 0 m N cfq2519 dispatched a request 8,16 1 0 1.091400688 0 m N cfq2519 activate rq, drv=1 8,16 1 3601 1.091400766 2519 D W 144322544 + 16 [md127_raid5] 8,16 1 0 1.091406151 0 m N cfq2519 Not idling. st->count:1 8,16 1 0 1.091406460 0 m N cfq2519 dispatch_insert 8,16 1 0 1.091406931 0 m N cfq2519 dispatched a request 8,16 1 0 1.091407291 0 m N cfq2519 activate rq, drv=2 8,16 1 3602 1.091407378 2519 D W 144322520 + 24 [md127_raid5] 8,16 1 0 1.091414006 0 m N cfq2519 Not idling. st->count:1 8,16 1 0 1.091414297 0 m N cfq2519 dispatch_insert 8,16 1 0 1.091414702 0 m N cfq2519 dispatched a request 8,16 1 0 1.091415047 0 m N cfq2519 activate rq, drv=3 8,16 1 3603 1.091415125 2519 D W 144322488 + 32 [md127_raid5] 8,16 1 0 1.091416469 0 m N cfq2519 Not idling. st->count:1 8,16 1 0 1.091416754 0 m N cfq2519 dispatch_insert 8,16 1 0 1.091417186 0 m N cfq2519 dispatched a request 8,16 1 0 1.091417535 0 m N cfq2519 activate rq, drv=4 8,16 1 3604 1.091417628 2519 D W 144322432 + 56 [md127_raid5] 8,16 1 3605 1.091857225 4393 C W 144322544 + 16 [0] 8,16 1 0 1.091858753 0 m N cfq2519 complete rqnoidle 0 8,16 1 3606 1.092068456 4393 C W 144322520 + 24 [0] 8,16 1 0 1.092069851 0 m N cfq2519 complete rqnoidle 0 8,16 1 3607 1.092350440 4393 C W 144322488 + 32 [0] 8,16 1 0 1.092351688 0 m N cfq2519 complete rqnoidle 0 8,16 1 3608 1.093629323 0 C W 144322432 + 56 [0] 8,16 1 0 1.093631151 0 m N cfq2519 complete rqnoidle 0 8,16 1 0 1.093631574 0 m N cfq2519 will busy wait 8,16 1 0 1.093631829 0 m N cfq schedule dispatch
Because in func "elv_attempt_insert_merge", it only to try to backmerge.So the four request can't merge in theory. I trace ten minutes and to count those situation, it can count 25%.
So i think i should do something.
I diged into and founded elevator only provide backmerge using hash.
So I think i can sort in func "blk_flush_plug_list".
At present the requests in blk_plug will sort,but only by request_queue not by start_sector of request. So i modified the code:
block/blk-core.c +4 -3
@@ -2750,7 +2750,8 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b) struct request *rqa = container_of(a, struct request, queuelist); struct request *rqb = container_of(b, struct request, queuelist); -return !(rqa->q <= rqb->q); +return !(rqa->q < rqb->q || + (rqa->q == rqb->q &&blk_rq_pos (rqa) <blk_rq_pos (rqb))); }/*
@@ -2822,10 +2823,10 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)list_splice_init (&plug->list, &list); -if (plug->should_sort) { +// if (plug->should_sort) { list_sort (NULL , &list, plug_rq_cmp); plug->should_sort =0 ; - } +// } q =NULL ; depth =0 ;
With those,i tested and not found situation like above.
So i think i can send a patch to you.But because the early patchset, so I wanted to ask your suggestion how to those.
BTW, why are there only backmerge using hash in elevator?
Jianpeng�翳簕.n�+壏煯壄�+%娝�遍荻w�簕.n�+壏{炳G珴�妠ay� 蕠跈�,jf＂穐殢飦�戧鐉_璁(殠娸"濟�m���G珴�⒏?櫒璀�&ｘ忈秈O曟瑉窔v豝�m��� �鹅�⒏?朓�