Skip to contentSkip to conversation

mxs: Replace i.MX233 by i.MX23 on copyright header

PATCH New Otavio Salvador 4 participants 11 messages Aug 19, 2012 – Aug 27, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 mxs: Replace i.MX233 by i.MX23 on copyright header

All other header are going to use i.MX23 so we change this for consistency.

---
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
index 4610363..9e4a4c9 100644
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX233/i.MX28 specific functions
+ * Freescale i.MX23/i.MX28 specific functions
  *
  * Copyright (C) 2011 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 2/3 mxs: Only build internal Ethernet controller for i.MX28

The internal Ethernet controller is only available on i.MX28 processors so it needs to use CONFIG_MX28 guardian to avoid having this code called in others.

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/arm926ejs/mxs/mxs.c +1 -1
index c028e5e..a1769fd 100644
@@ -246,7 +246,7 @@ int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 /*
  * Initializes on-chip ethernet controllers.
  */
-#ifdef	CONFIG_CMD_NET
+#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET)
 int cpu_eth_init(bd_t *bis)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/3 mxs: Only build internal Ethernet controller for i.MX28

Dear Otavio Salvador,

Quoted 17 lines

The internal Ethernet controller is only available on i.MX28 processors so it needs to use CONFIG_MX28 guardian to avoid having this code called in others.

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
(quoted diff) +0 -0

b/arch/arm/cpu/arm926ejs/mxs/mxs.c index c028e5e..a1769fd 100644

arch/arm/cpu/arm926ejs/mxs/mxs.c +0 -0
@@ -246,7 +246,7 @@ int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int

argc, char *const argv[]) /*
* Initializes on-chip ethernet controllers.
*/

arch/arm/cpu/arm926ejs/mxs/mxs.c int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) · line 252

Quoted 5 lines
arch/arm/cpu/arm926ejs/mxs/mxs.c +1 -1
-#ifdef	CONFIG_CMD_NET
+#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET)
 int cpu_eth_init(bd_t *bis)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =

Best regards,
Marek Vasut

#3 lore raw

PATCH 3/3 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'

In reply to Otavio Salvador

The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly.

The following boards has been changed:

* apx4devkit
* m28evk
* mx28evk
* sc_sps_1

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          |    4 ++--
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
 board/denx/m28evk/m28evk.c                |    2 +-
 board/freescale/mx28evk/mx28evk.c         |    2 +-
 board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)
arch/arm/cpu/arm926ejs/mxs/mxs.c +2 -2
index a1769fd..c8cda6a 100644
@@ -320,13 +320,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 }
 #endif
 
-int mx28_dram_init(void)
+int mxs_dram_init(void)
 {
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
 	if (data->mem_dram_size == 0) {
-		printf("MX28:\n"
+		printf("MXS:\n"
 			"Error, the RAM size passed up from SPL is 0!\n");
 		hang();
 	}
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
index 9e4a4c9..fc84808 100644
@@ -69,6 +69,6 @@ struct mxs_spl_data {
 	uint32_t	mem_dram_size;
 };
 
-int mx28_dram_init(void);
+int mxs_dram_init(void);
 
 #endif	/* __SYS_PROTO_H__ */
board/bluegiga/apx4devkit/apx4devkit.c +1 -1
index 5a1042e..ae48ab5 100644
@@ -55,7 +55,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 int board_init(void)
board/denx/m28evk/m28evk.c +1 -1
index 74da3ea..9473d10 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 #ifdef	CONFIG_CMD_MMC
board/freescale/mx28evk/mx28evk.c +1 -1
index 1320277..867d3c8 100644
@@ -64,7 +64,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 int board_init(void)
board/schulercontrol/sc_sps_1/sc_sps_1.c +1 -1
index 5f58e0b..fda191a 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 #ifdef	CONFIG_CMD_MMC
Signature · 1 line
1.7.10.4
#4 lore raw

PATCH 3/3 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'

Dear Otavio Salvador,

Quoted 2 lines

The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly.

Quoted 101 lines

The following boards has been changed:

* apx4devkit
* m28evk
* mx28evk
* sc_sps_1

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          |    4 ++--
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
 board/denx/m28evk/m28evk.c                |    2 +-
 board/freescale/mx28evk/mx28evk.c         |    2 +-
 board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)
(quoted diff) +0 -0

b/arch/arm/cpu/arm926ejs/mxs/mxs.c index a1769fd..c8cda6a 100644

arch/arm/cpu/arm926ejs/mxs/mxs.c +2 -2
@@ -320,13 +320,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char
 *mac) }
 #endif
 
-int mx28_dram_init(void)
+int mxs_dram_init(void)
 {
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
 	if (data->mem_dram_size == 0) {
-		printf("MX28:\n"
+		printf("MXS:\n"
 			"Error, the RAM size passed up from SPL is 0!\n");
 		hang();
 	}
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-mxs/sys_proto.h index 9e4a4c9..fc84808 100644

arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -69,6 +69,6 @@ struct mxs_spl_data {
 	uint32_t	mem_dram_size;
 };
 
-int mx28_dram_init(void);
+int mxs_dram_init(void);
 
 #endif	/* __SYS_PROTO_H__ */
(quoted diff) +0 -0

b/board/bluegiga/apx4devkit/apx4devkit.c index 5a1042e..ae48ab5 100644

board/bluegiga/apx4devkit/apx4devkit.c +1 -1
@@ -55,7 +55,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 int board_init(void)
board/denx/m28evk/m28evk.c +1 -1
index 74da3ea..9473d10 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 #ifdef	CONFIG_CMD_MMC
(quoted diff) +0 -0

b/board/freescale/mx28evk/mx28evk.c index 1320277..867d3c8 100644

board/freescale/mx28evk/mx28evk.c +1 -1
@@ -64,7 +64,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 int board_init(void)
(quoted diff) +0 -0

b/board/schulercontrol/sc_sps_1/sc_sps_1.c index 5f58e0b..fda191a 100644

board/schulercontrol/sc_sps_1/sc_sps_1.c +1 -1
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-	return mx28_dram_init();
+	return mxs_dram_init();
 }
 
 #ifdef	CONFIG_CMD_MMC
#5 lore raw

PATCH 3/3 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'

Ping?

Quoted 108 lines · Marek Vasut

Dear Otavio Salvador,

Quoted 2 lines

The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly.

Quoted 101 lines

The following boards has been changed:

* apx4devkit
* m28evk
* mx28evk
* sc_sps_1

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          |    4 ++--
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
 board/denx/m28evk/m28evk.c                |    2 +-
 board/freescale/mx28evk/mx28evk.c         |    2 +-
 board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)
(quoted diff) +0 -0

b/arch/arm/cpu/arm926ejs/mxs/mxs.c index a1769fd..c8cda6a 100644

arch/arm/cpu/arm926ejs/mxs/mxs.c +2 -2
@@ -320,13 +320,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char
 *mac) }
 #endif
 
-int mx28_dram_init(void)
+int mxs_dram_init(void)
 {
      struct mxs_spl_data *data = (struct mxs_spl_data *)
              ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
      if (data->mem_dram_size == 0) {
-             printf("MX28:\n"
+             printf("MXS:\n"
                      "Error, the RAM size passed up from SPL is 0!\n");
              hang();
      }
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-mxs/sys_proto.h index 9e4a4c9..fc84808 100644

arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -69,6 +69,6 @@ struct mxs_spl_data {
      uint32_t        mem_dram_size;
 };
 
-int mx28_dram_init(void);
+int mxs_dram_init(void);
 
 #endif       /* __SYS_PROTO_H__ */
(quoted diff) +0 -0

b/board/bluegiga/apx4devkit/apx4devkit.c index 5a1042e..ae48ab5 100644

board/bluegiga/apx4devkit/apx4devkit.c +1 -1
@@ -55,7 +55,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 int board_init(void)
board/denx/m28evk/m28evk.c +1 -1
index 74da3ea..9473d10 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 #ifdef       CONFIG_CMD_MMC
(quoted diff) +0 -0

b/board/freescale/mx28evk/mx28evk.c index 1320277..867d3c8 100644

board/freescale/mx28evk/mx28evk.c +1 -1
@@ -64,7 +64,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 int board_init(void)
(quoted diff) +0 -0

b/board/schulercontrol/sc_sps_1/sc_sps_1.c index 5f58e0b..fda191a 100644

board/schulercontrol/sc_sps_1/sc_sps_1.c +1 -1
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 #ifdef       CONFIG_CMD_MMC
Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#6 lore raw

PATCH 3/3 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'

Quoted 2 lines · Otavio Salvador

Ping?

Hi Otavio,

Marek has already acked it, we get the ACK from Veli-Pekkola this morning. I have put the series in my "ready to be merged" queue. It will be merged soon.

Regards,
Stefano

Quoted 112 lines · Marek Vasut
Quoted 108 lines

Dear Otavio Salvador,

Quoted 2 lines

The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly.

Quoted 101 lines

The following boards has been changed:

* apx4devkit
* m28evk
* mx28evk
* sc_sps_1

---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          |    4 ++--
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
 board/denx/m28evk/m28evk.c                |    2 +-
 board/freescale/mx28evk/mx28evk.c         |    2 +-
 board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)
(quoted diff) +0 -0

b/arch/arm/cpu/arm926ejs/mxs/mxs.c index a1769fd..c8cda6a 100644

arch/arm/cpu/arm926ejs/mxs/mxs.c +2 -2
@@ -320,13 +320,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char
 *mac) }
 #endif
 
-int mx28_dram_init(void)
+int mxs_dram_init(void)
 {
      struct mxs_spl_data *data = (struct mxs_spl_data *)
              ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
      if (data->mem_dram_size == 0) {
-             printf("MX28:\n"
+             printf("MXS:\n"
                      "Error, the RAM size passed up from SPL is 0!\n");
              hang();
      }
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-mxs/sys_proto.h index 9e4a4c9..fc84808 100644

arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -69,6 +69,6 @@ struct mxs_spl_data {
      uint32_t        mem_dram_size;
 };
 
-int mx28_dram_init(void);
+int mxs_dram_init(void);
 
 #endif       /* __SYS_PROTO_H__ */
(quoted diff) +0 -0

b/board/bluegiga/apx4devkit/apx4devkit.c index 5a1042e..ae48ab5 100644

board/bluegiga/apx4devkit/apx4devkit.c +1 -1
@@ -55,7 +55,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 int board_init(void)
board/denx/m28evk/m28evk.c +1 -1
index 74da3ea..9473d10 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 #ifdef       CONFIG_CMD_MMC
(quoted diff) +0 -0

b/board/freescale/mx28evk/mx28evk.c index 1320277..867d3c8 100644

board/freescale/mx28evk/mx28evk.c +1 -1
@@ -64,7 +64,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 int board_init(void)
(quoted diff) +0 -0

b/board/schulercontrol/sc_sps_1/sc_sps_1.c index 5f58e0b..fda191a 100644

board/schulercontrol/sc_sps_1/sc_sps_1.c +1 -1
@@ -72,7 +72,7 @@ int board_init(void)
 
 int dram_init(void)
 {
-     return mx28_dram_init();
+     return mxs_dram_init();
 }
 
 #ifdef       CONFIG_CMD_MMC
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#7 lore raw

PATCH 3/3 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'

In reply to Otavio Salvador

Hi Otavio,

Quoted 11 lines · Otavio Salvador

The DRAM initialization, after SPL has complete, is exactly the same for all mxs SoCs so we should name it accordinly.

The following boards has been changed:

* apx4devkit
* m28evk
* mx28evk
* sc_sps_1

Quoted 94 lines
---
  arch/arm/cpu/arm926ejs/mxs/mxs.c          |    4 ++--
  arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
  board/bluegiga/apx4devkit/apx4devkit.c    |    2 +-
  board/denx/m28evk/m28evk.c                |    2 +-
  board/freescale/mx28evk/mx28evk.c         |    2 +-
  board/schulercontrol/sc_sps_1/sc_sps_1.c  |    2 +-
  6 files changed, 7 insertions(+), 7 deletions(-)
arch/arm/cpu/arm926ejs/mxs/mxs.c +2 -2
index a1769fd..c8cda6a 100644
@@ -320,13 +320,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
  }
  #endif
 
-int mx28_dram_init(void)
+int mxs_dram_init(void)
  {
  	struct mxs_spl_data *data = (struct mxs_spl_data *)
  		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
  	if (data->mem_dram_size == 0) {
-		printf("MX28:\n"
+		printf("MXS:\n"
  			"Error, the RAM size passed up from SPL is 0!\n");
  		hang();
  	}
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
index 9e4a4c9..fc84808 100644
@@ -69,6 +69,6 @@ struct mxs_spl_data {
  	uint32_t	mem_dram_size;
  };
 
-int mx28_dram_init(void);
+int mxs_dram_init(void);
 
  #endif	/* __SYS_PROTO_H__ */
board/bluegiga/apx4devkit/apx4devkit.c +1 -1
index 5a1042e..ae48ab5 100644
@@ -55,7 +55,7 @@ int board_early_init_f(void)
 
  int dram_init(void)
  {
-	return mx28_dram_init();
+	return mxs_dram_init();
  }
 
  int board_init(void)
board/denx/m28evk/m28evk.c +1 -1
index 74da3ea..9473d10 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
  int dram_init(void)
  {
-	return mx28_dram_init();
+	return mxs_dram_init();
  }
 
  #ifdef	CONFIG_CMD_MMC
board/freescale/mx28evk/mx28evk.c +1 -1
index 1320277..867d3c8 100644
@@ -64,7 +64,7 @@ int board_early_init_f(void)
 
  int dram_init(void)
  {
-	return mx28_dram_init();
+	return mxs_dram_init();
  }
 
  int board_init(void)
board/schulercontrol/sc_sps_1/sc_sps_1.c +1 -1
index 5f58e0b..fda191a 100644
@@ -72,7 +72,7 @@ int board_init(void)
 
  int dram_init(void)
  {
-	return mx28_dram_init();
+	return mxs_dram_init();
  }
 
  #ifdef	CONFIG_CMD_MMC
#8 lore raw

PATCH 1/3 mxs: Replace i.MX233 by i.MX23 on copyright header

In reply to Otavio Salvador

Dear Otavio Salvador,

Quoted 13 lines

All other header are going to use i.MX23 so we change this for consistency.

---
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-mxs/sys_proto.h index 4610363..9e4a4c9 100644

arch/arm/include/asm/arch-mxs/sys_proto.h line 2

Quoted 3 lines
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX233/i.MX28 specific functions
+ * Freescale i.MX23/i.MX28 specific functions

It's MX233 though, no?

arch/arm/include/asm/arch-mxs/sys_proto.h line 5

Quoted 2 lines
arch/arm/include/asm/arch-mxs/sys_proto.h +0 -0
  * Copyright (C) 2011 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH

Best regards,
Marek Vasut

#9 lore raw

PATCH 1/3 mxs: Replace i.MX233 by i.MX23 on copyright header

Quoted 10 lines · Marek Vasut

Dear Otavio Salvador,

Quoted 8 lines

All other header are going to use i.MX23 so we change this for consistency.

---
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 10 lines

arch/arm/include/asm/arch-mxs/sys_proto.h line 2

Quoted 8 lines
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-mxs/sys_proto.h index 4610363..9e4a4c9 100644

arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX233/i.MX28 specific functions
+ * Freescale i.MX23/i.MX28 specific functions

It's MX233 though, no?

Yes but Fabio has asked me to use MX23 as done for the others (we don't use MX535 or so ... just to be consistent.

Quoted 5 lines

arch/arm/include/asm/arch-mxs/sys_proto.h line 5

Quoted 2 lines
arch/arm/include/asm/arch-mxs/sys_proto.h +0 -0
  * Copyright (C) 2011 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH

Best regards,
Marek Vasut

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#10 lore raw

PATCH 1/3 mxs: Replace i.MX233 by i.MX23 on copyright header

In reply to Otavio Salvador
Quoted 14 lines · Otavio Salvador

All other header are going to use i.MX23 so we change this for consistency.

---
 arch/arm/include/asm/arch-mxs/sys_proto.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/arch-mxs/sys_proto.h +0 -0
index 4610363..9e4a4c9 100644

arch/arm/include/asm/arch-mxs/sys_proto.h line 5

Quoted 6 lines
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -1
@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX233/i.MX28 specific functions
+ * Freescale i.MX23/i.MX28 specific functions
  *
  * Copyright (C) 2011 Marek Vasut <[email protected]>
  * on behalf of DENX Software Engineering GmbH

Applied (whole series) to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================