Linux 3.0.42

index 53acaa8..f98af03 100644
@@ -631,7 +631,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 		return -EFAULT;
 	if (a.offset & ~PAGE_MASK)
 		return -EINVAL;
-	a.addr = (unsigned long) compat_ptr(a.addr);
 	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
 			      a.offset >> PAGE_SHIFT);
 }

@@ -642,7 +641,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
-	a.addr = (unsigned long) compat_ptr(a.addr);
 	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 }
 

index 58efeb9..2f7847d 100644
@@ -683,6 +683,7 @@ int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte)
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	if (!PageHighMem(page)) {

@@ -706,6 +707,24 @@ int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte)
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 
+	/* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+	 * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+	 * pfn so that the following mfn_to_pfn(mfn) calls will return the
+	 * pfn from the m2p_override (the backend pfn) instead.
+	 * We need to do this because the pages shared by the frontend
+	 * (xen-blkfront) can be already locked (lock_page, called by
+	 * do_read_cache_page); when the userspace backend tries to use them
+	 * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+	 * do_blockdev_direct_IO is going to try to lock the same pages
+	 * again resulting in a deadlock.
+	 * As a side effect get_user_pages_fast might not be safe on the
+	 * frontend pages while they are being shared with the backend,
+	 * because mfn_to_pfn (that ends up being called by GUPF) will
+	 * return the backend pfn rather than the frontend pfn. */
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+		set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_add_override);

@@ -717,6 +736,7 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	mfn = get_phys_to_machine(pfn);

@@ -743,6 +763,22 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 		/* No tlb flush necessary because the caller already
 		 * left the pte unmapped. */
 
+	/* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+	 * somewhere in this domain, even before being added to the
+	 * m2p_override (see comment above in m2p_add_override).
+	 * If there are no other entries in the m2p_override corresponding
+	 * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+	 * the original pfn (the one shared by the frontend): the backend
+	 * cannot do any IO on this page anymore because it has been
+	 * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+	 * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+	 * pfn again. */
+	mfn &= ~FOREIGN_FRAME_BIT;
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+			m2p_find_override(mfn) == NULL)
+		set_phys_to_machine(pfn, mfn);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_remove_override);

index 2d6039b..3bd85f7 100644
@@ -150,8 +150,6 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 	I915_WRITE_HEAD(ring, 0);
 	ring->write_tail(ring, 0);
 
-	/* Initialize the ring. */
-	I915_WRITE_START(ring, obj->gtt_offset);
 	head = I915_READ_HEAD(ring) & HEAD_ADDR;
 
 	/* G45 ring initialization fails to reset head to zero */

@@ -177,6 +175,11 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 		}
 	}
 
+	/* Initialize the ring. This must happen _after_ we've cleared the ring
+	 * registers with the above sequence (the readback of the HEAD registers
+	 * also enforces ordering), otherwise the hw might lose the new ring
+	 * register values. */
+	I915_WRITE_START(ring, obj->gtt_offset);
 	I915_WRITE_CTL(ring,
 			((ring->size - PAGE_SIZE) & RING_NR_PAGES)
 			| RING_REPORT_64K | RING_VALID);

71 lines not on this page · raw message

index 3dedaa0..4d81e96 100644
@@ -253,13 +253,10 @@ void rs690_line_buffer_adjust(struct radeon_device *rdev,
  * rv515
  */
 struct rv515_mc_save {
-	u32 d1vga_control;
-	u32 d2vga_control;
 	u32 vga_render_control;
 	u32 vga_hdp_control;
-	u32 d1crtc_control;
-	u32 d2crtc_control;
 };
+
 int rv515_init(struct radeon_device *rdev);
 void rv515_fini(struct radeon_device *rdev);
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);

@@ -387,11 +384,10 @@ void r700_cp_fini(struct radeon_device *rdev);
  * evergreen
  */
 struct evergreen_mc_save {
-	u32 vga_control[6];
 	u32 vga_render_control;
 	u32 vga_hdp_control;
-	u32 crtc_control[6];
 };
+
 void evergreen_pcie_gart_tlb_flush(struct radeon_device *rdev);
 int evergreen_init(struct radeon_device *rdev);
 void evergreen_fini(struct radeon_device *rdev);

index 6613ee9..d5f45b4 100644
@@ -281,12 +281,8 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 
 void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save)
 {
-	save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL);
-	save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL);
 	save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL);
 	save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL);
-	save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL);
-	save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
 
 	/* Stop all video */
 	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);

@@ -311,15 +307,6 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
 	/* Unlock host access */
 	WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
 	mdelay(1);
-	/* Restore video state */
-	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
-	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
-	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
-	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
-	WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
-	WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
-	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
-	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
 	WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
 }
 

130 lines not on this page · raw message

index 0781fb0..39ebf9f 100644
@@ -829,6 +829,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0411, 0x015d) },
 	{ USB_DEVICE(0x0411, 0x016f) },
 	{ USB_DEVICE(0x0411, 0x01a2) },
+	{ USB_DEVICE(0x0411, 0x01ee) },
 	/* Corega */
 	{ USB_DEVICE(0x07aa, 0x002f) },
 	{ USB_DEVICE(0x07aa, 0x003c) },

index 9ab094c..efba0188 100644
@@ -798,6 +798,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 }
 EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
 
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *

index b1002a8..ef004a5 100644
@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
 void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}

index 39e230f..b047458 100644
@@ -140,11 +140,21 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;

index 16ec4d3..1f9602a 100644
@@ -163,7 +163,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 
 	ret = handshake(xhci, &xhci->op_regs->command,
-			CMD_RESET, 0, 250 * 1000);
+			CMD_RESET, 0, 10 * 1000 * 1000);
 	if (ret)
 		return ret;
 

@@ -172,7 +172,8 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
+	return handshake(xhci, &xhci->op_regs->status,
+			 STS_CNR, 0, 10 * 1000 * 1000);
 }
 
 /*

@@ -593,6 +594,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	spin_unlock_irq(&xhci->lock);

index 25c3e26..d88644d 100644
@@ -1316,6 +1316,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	(1 << 7)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
+#define XHCI_SPURIOUS_REBOOT	(1 << 13)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

index 86fc8fc..535a307 100644
@@ -809,6 +809,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },

index d27d7d7..54b4258 100644
@@ -795,6 +795,13 @@
 #define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
 
 /*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */

index fdbeb6a..fd2463e 100644
@@ -1191,9 +1191,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-	for (i = 0; i < NUM_URBS; ++i)
-		if (mos7840_port->busy[i])
-			chars += URB_TRANSFER_BUFFER_SIZE;
+	for (i = 0; i < NUM_URBS; ++i) {
+		if (mos7840_port->busy[i]) {
+			struct urb *urb = mos7840_port->write_urb_pool[i];
+			chars += urb->transfer_buffer_length;
+		}
+	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;

308 lines not on this page · raw message

index 113b107..489d406 100644
@@ -860,6 +860,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei->i_reserved_meta_blocks = 0;
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_da_metadata_calc_len = 0;
+	ei->i_da_metadata_calc_last_lblock = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
 #ifdef CONFIG_QUOTA
 	ei->i_reserved_quota = 0;

index 82a6646..79fca8d 100644
@@ -1710,7 +1710,7 @@ static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
 	size_t n;
 	u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
 
-	for (n = 0; n < count; n++) {
+	for (n = 0; n < count; n++, iov++) {
 		if (iov->iov_len > (size_t) max)
 			return -ENOMEM;
 		max -= iov->iov_len;

index b08e04c..6cd1576 100644
@@ -757,6 +757,27 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
 	.bInterfaceSubClass = (sc), \
 	.bInterfaceProtocol = (pr)
 
+/**
+ * USB_VENDOR_AND_INTERFACE_INFO - describe a specific usb vendor with a class of usb interfaces
+ * @vend: the 16 bit USB Vendor ID
+ * @cl: bInterfaceClass value
+ * @sc: bInterfaceSubClass value
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific vendor with a specific class of interfaces.
+ *
+ * This is especially useful when explicitly matching devices that have
+ * vendor specific bDeviceClass values, but standards-compliant interfaces.
+ */
+#define USB_VENDOR_AND_INTERFACE_INFO(vend, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+		| USB_DEVICE_ID_MATCH_VENDOR, \
+	.idVendor = (vend), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr)
+
 /* ----------------------------------------------------------------------- */
 
 /* Stuff for dynamic usb ids */