MX28: mx28evk: Follow m28evk change in SSP clock
PATCH 1/1 MX28: mx28evk: Follow m28evk change in SSP clock
This changes the board config to follow m28evk board configuration.
--- board/freescale/mx28evk/mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
board/freescale/mx28evk/mx28evk.c +2 -2
@@ -49,8 +49,8 @@ int board_early_init_f(void)/* SSP0 clock at 96MHz */ mx28_set_sspclk (MXC_SSPCLK0 ,96000 ,0 ); -/* SSP2 clock at 96MHz */ -mx28_set_sspclk (MXC_SSPCLK2 ,96000 ,0 ); +/* SSP2 clock at 160MHz */ +mx28_set_sspclk (MXC_SSPCLK2 ,160000 ,0 );#ifdef CONFIG_CMD_USB mxs_iomux_setup_pad (MX28_PAD_SSP2_SS1__USB1_OVERCURRENT );
Signature · 1 line
1.7.10.4
PATCH 1/1 MX28: mx28evk: Follow m28evk change in SSP clock
Dear Otavio Salvador,
Quoted 12 lines
This changes the board config to follow m28evk board configuration.
Signed-off-by Otavio Salvador <[email protected]>--- board/freescale/mx28evk/mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/board/freescale/mx28evk/mx28evk.cindex 867d3c8..d782aea 100644
board/freescale/mx28evk/mx28evk.c int board_early_init_f(void) · line 53
Quoted 7 lines
board/freescale/mx28evk/mx28evk.c +2
-2@@ -49,8 +49,8 @@ int board_early_init_f(void)/* SSP0 clock at 96MHz */ mx28_set_sspclk (MXC_SSPCLK0 ,96000 ,0 ); -/* SSP2 clock at 96MHz */ -mx28_set_sspclk (MXC_SSPCLK2 ,96000 ,0 ); +/* SSP2 clock at 160MHz */ +mx28_set_sspclk (MXC_SSPCLK2 ,160000 ,0 );
You _MUST_ also adjust the default SPI flash sleep, otherwise this is flat pointless change
board/freescale/mx28evk/mx28evk.c int board_early_init_f(void) · line 56
Quoted 2 lines
board/freescale/mx28evk/mx28evk.c +0
-0#ifdef CONFIG_CMD_USB mxs_iomux_setup_pad (MX28_PAD_SSP2_SS1__USB1_OVERCURRENT );
Best regards,
Marek Vasut
PATCH 1/1 MX28: mx28evk: Follow m28evk change in SSP clock
Quoted 5 lines · Marek Vasut
Dear Otavio Salvador,
Quoted 3 lines
This changes the board config to follow m28evk board configuration.
Signed-off-by Otavio Salvador <[email protected]>
...
Quoted 7 lines
board/freescale/mx28evk/mx28evk.c int board_early_init_f(void) · line 53
Quoted 4 lines
board/freescale/mx28evk/mx28evk.c +2
-2-/* SSP2 clock at 96MHz */ -mx28_set_sspclk (MXC_SSPCLK2 ,96000 ,0 ); +/* SSP2 clock at 160MHz */ +mx28_set_sspclk (MXC_SSPCLK2 ,160000 ,0 );You _MUST_ also adjust the default SPI flash sleep, otherwise this is flat pointless change