Please pull u-boot-staging/[email protected]

Hello,

This replaces my previous pull-request and is new warning free on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit
4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to
5d26e4de33fab7b132e8a8036ac54176f537d79f:

ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU access
snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745
++++++++++++++++++++
board/st-ericsson/snowball/snowball.c              |  348 +++++++++
board/st-ericsson/u8500/Makefile                   |    2 +-
board/st-ericsson/u8500/u8500_href.c               |  100 +--
boards.cfg                                         |    2 +
drivers/gpio/Makefile                              |    2 +
drivers/gpio/bcm2835_gpio.c                        |   89 +++
drivers/gpio/db8500_gpio.c                         |  221 ++++++
drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
drivers/mmc/arm_pl180_mmci.h                       |   27 +-
drivers/serial/serial_pl01x.c                      |    2 +
include/configs/rpi_b.h                            |  104 +++
include/configs/snowball.h                         |  266 +++++++ 39

files changed, 2937 insertions(+), 213 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644

board/raspberrypi/rpi_b/Makefile create mode 100644 board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/snowball.h

Hi Tom,

Quoted 97 lines · Tom Rini

Hello,

This replaces my previous pull-request and is new warning free on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit
4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to
5d26e4de33fab7b132e8a8036ac54176f537d79f:

ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU access
snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745
++++++++++++++++++++
board/st-ericsson/snowball/snowball.c              |  348 +++++++++
board/st-ericsson/u8500/Makefile                   |    2 +-
board/st-ericsson/u8500/u8500_href.c               |  100 +--
boards.cfg                                         |    2 +
drivers/gpio/Makefile                              |    2 +
drivers/gpio/bcm2835_gpio.c                        |   89 +++
drivers/gpio/db8500_gpio.c                         |  221 ++++++
drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
drivers/mmc/arm_pl180_mmci.h                       |   27 +-
drivers/serial/serial_pl01x.c                      |    2 +
include/configs/rpi_b.h                            |  104 +++
include/configs/snowball.h                         |  266 +++++++ 39

files changed, 2937 insertions(+), 213 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644

Quoted 8 lines

board/raspberrypi/rpi_b/Makefile create mode 100644 board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/snowball.h

Are you sure you want me to only pull the top 15 patches of u-boot-staging/trini at ti.com, but not the tens of ones that that are below it in u-boot-staging/master? These are nowhere else, especially not in u-boot/master, so I am wondering why your your request takes staging/master as its base.

Quoted 110 lines · Albert ARIBAUD

Hi Tom,

Quoted 97 lines · Tom Rini

Hello,

This replaces my previous pull-request and is new warning free on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit
4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to
5d26e4de33fab7b132e8a8036ac54176f537d79f:

ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU access
snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745
++++++++++++++++++++
board/st-ericsson/snowball/snowball.c              |  348 +++++++++
board/st-ericsson/u8500/Makefile                   |    2 +-
board/st-ericsson/u8500/u8500_href.c               |  100 +--
boards.cfg                                         |    2 +
drivers/gpio/Makefile                              |    2 +
drivers/gpio/bcm2835_gpio.c                        |   89 +++
drivers/gpio/db8500_gpio.c                         |  221 ++++++
drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
drivers/mmc/arm_pl180_mmci.h                       |   27 +-
drivers/serial/serial_pl01x.c                      |    2 +
include/configs/rpi_b.h                            |  104 +++
include/configs/snowball.h                         |  266 +++++++ 39

files changed, 2937 insertions(+), 213 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644

Quoted 8 lines

board/raspberrypi/rpi_b/Makefile create mode 100644 board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/snowball.h

Quoted 5 lines

Are you sure you want me to only pull the top 15 patches of u-boot-staging/trini at ti.com, but not the tens of ones that that are below it in u-boot-staging/master? These are nowhere else, especially not in u-boot/master, so I am wondering why your your request takes staging/master as its base.

I don't see any patches like that. And I did a quick re-confirm of what is in trini at ti.com and that's what I want to replace the commits in u-boot-arm/master from before.

Quoted 118 lines · Tom Rini

Quoted 111 lines · Albert ARIBAUD

Hi Tom,

Quoted 98 lines · Tom Rini

Hello,

This replaces my previous pull-request and is new warning free on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit
4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to
5d26e4de33fab7b132e8a8036ac54176f537d79f:

ARM: add Raspberry Pi model B board, using BCM2835 SoC
(2012-08-15 09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU
access snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745
++++++++++++++++++++
board/st-ericsson/snowball/snowball.c              |  348
+++++++++ board/st-ericsson/u8500/Makefile
|    2 +- board/st-ericsson/u8500/u8500_href.c               |
100 +-- boards.cfg                                         |
2 + drivers/gpio/Makefile                              |    2 +
drivers/gpio/bcm2835_gpio.c                        |   89 +++
drivers/gpio/db8500_gpio.c                         |  221 ++++++
drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
drivers/mmc/arm_pl180_mmci.h                       |   27 +-
drivers/serial/serial_pl01x.c                      |    2 +
include/configs/rpi_b.h                            |  104 +++
include/configs/snowball.h                         |  266

+++++++ 39 files changed, 2937 insertions(+), 213 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644 board/raspberrypi/rpi_b/Makefile create mode 100644

Quoted 8 lines

board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/snowball.h

Quoted 5 lines

Are you sure you want me to only pull the top 15 patches of u-boot-staging/trini at ti.com, but not the tens of ones that that are below it in u-boot-staging/master? These are nowhere else, especially not in u-boot/master, so I am wondering why your your request takes staging/master as its base.

Quoted 3 lines

I don't see any patches like that. And I did a quick re-confirm of what is in trini at ti.com and that's what I want to replace the commits in u-boot-arm/master from before.

To be clear, u-boot-staging/trini at ti.com is based on a somewhat older, but not top of tree u-boot/master than what u-boot-arm is based on today. I think your local u-boot/master is out of date.
http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
is what my branch is on top of.

Hi Tom,

Quoted 123 lines · Tom Rini

Quoted 118 lines · Tom Rini

Quoted 111 lines · Albert ARIBAUD

Hi Tom,

Quoted 98 lines · Tom Rini

Hello,

This replaces my previous pull-request and is new warning free on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit
4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-staging trini at ti.com

for you to fetch changes up to
5d26e4de33fab7b132e8a8036ac54176f537d79f:

ARM: add Raspberry Pi model B board, using BCM2835 SoC
(2012-08-15 09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU
access snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745
++++++++++++++++++++
board/st-ericsson/snowball/snowball.c              |  348
+++++++++ board/st-ericsson/u8500/Makefile
|    2 +- board/st-ericsson/u8500/u8500_href.c               |
100 +-- boards.cfg                                         |
2 + drivers/gpio/Makefile                              |    2 +
drivers/gpio/bcm2835_gpio.c                        |   89 +++
drivers/gpio/db8500_gpio.c                         |  221 ++++++
drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
drivers/mmc/arm_pl180_mmci.h                       |   27 +-
drivers/serial/serial_pl01x.c                      |    2 +
include/configs/rpi_b.h                            |  104 +++
include/configs/snowball.h                         |  266

+++++++ 39 files changed, 2937 insertions(+), 213 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644 board/raspberrypi/rpi_b/Makefile create mode 100644

Quoted 8 lines

board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/snowball.h

Quoted 5 lines

Are you sure you want me to only pull the top 15 patches of u-boot-staging/trini at ti.com, but not the tens of ones that that are below it in u-boot-staging/master? These are nowhere else, especially not in u-boot/master, so I am wondering why your your request takes staging/master as its base.

Quoted 3 lines

I don't see any patches like that. And I did a quick re-confirm of what is in trini at ti.com and that's what I want to replace the commits in u-boot-arm/master from before.

Quoted 5 lines

To be clear, u-boot-staging/trini at ti.com is based on a somewhat older, but not top of tree u-boot/master than what u-boot-arm is based on today. I think your local u-boot/master is out of date.
http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
is what my branch is on top of.

Top 15 patches ("snowball: Add support for ux500 based snowball board" to "ARM: add Raspberry Pi model B board, using BCM2835 SoC") applied to u-boot-arm/master, resulting in the total number of boards built rising up from 314 to 315.

Please make sure this is what you wanted.

Thanks and apologies for the time it took!