3.4.10 N_GSM tty_io WARNING and lockup
Hi,
I'm trying to use GSM tty line discipline. Basically
echo AT+CMUX=0 > /dev/ttyS0
set termios (speed etc.)
int ldisc = N_GSM0710;ioctl(fd, TIOCSETD, &ldisc);
...
The ioctl first fails with EIO (probably due to inactive DCD line) in tty_set_ldisc():
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
tty_unlock();
return -EIO; <<<<<< HERE
}Now trying to run the program again:
------------[ cut here ]------------ WARNING: at /home/khalasa/src/linux-3.4/drivers/tty/tty_io.c:1368 tty_open+0x2e8/0x55c() Modules linked in: m25p80 ag71xx Call Trace: [<8030a02c>] dump_stack+0x8/0x34 [<8007a35c>] warn_slowpath_common+0x78/0xa4 [<8007a3a0>] warn_slowpath_null+0x18/0x24 [<80193cac>] tty_open+0x2e8/0x55c [<800f1500>] chrdev_open+0x120/0x164 [<800eb320>] __dentry_open.isra.12+0x1bc/0x318 [<800fae54>] do_last.isra.32+0x774/0x78c [<800fb094>] path_openat+0xcc/0x3b4 [<800fb498>] do_filp_open+0x3c/0xa4 [<800ec3dc>] do_sys_open+0x13c/0x1ec [<80068dc4>] stack_done+0x20/0x40 ---[ end trace 5958cc366bfb54c4 ]---
then it locks up (task "D" state, though interruptible).
A known problem probably?
Any ideas? (I know about CLOCAL).
Signature · 4 lines
Krzysztof Halasa Research Institute for Automation and Measurements PIAP Al. Jerozolimskie 202, 02-486 Warsaw, Poland
Quoted 9 lines · On Wed, 05 Sep 2012 12:56:03 +0200 [email protected] (Krzysztof Hałasa) wrote:
Hi,
I'm trying to use GSM tty line discipline. Basically
echo AT+CMUX=0 >
/dev/ttyS0set termios (speed etc.)
int ldisc =N_GSM0710;ioctl(fd, TIOCSETD, &ldisc);
Baffled at this point. If you set some other ldisc instead (eg PPP) can you reproduce it the same way ?
Quoted 10 lines · Alan Cox
Quoted 7 lines
I'm trying to use GSM tty line discipline. Basically
echo AT+CMUX=0 >
/dev/ttyS0set termios (speed etc.)
int ldisc =N_GSM0710;ioctl(fd, TIOCSETD, &ldisc);Baffled at this point. If you set some other ldisc instead (eg PPP) can you reproduce it the same way ?
In the meantime I've rebased to v3.5.3 and it started to work. Do you think it is worth it investigating v3.4.10 at this point?
This is Atheros AR71xx based RouterStation Pro board (MIPS). I'm using several patches supporting this board, though I can't see anything relevant to serial/tty, except maybe the following (which is IMHO not the problem source either):
@@ -1941,17 +1941,20 @@ static int serial8250_startup(struct uart_port *port)
if (port->type == PORT_16C950) { /* Wake up and initialize UART */
- up->acr = 0;
+ up->acr = UART_ACR_RTS_485;
+ serial_icr_write(up, UART_ACR, up->acr);
serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); serial_port_out(port, UART_EFR, UART_EFR_ECB); serial_port_out(port, UART_IER, 0); serial_port_out(port, UART_LCR, 0);
+#if 0
serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); serial_port_out(port, UART_EFR, UART_EFR_ECB); serial_port_out(port, UART_LCR, 0);
+#endif
Anyway the patchsets are almost identical with both kernel versions.
Signature · 4 lines
Krzysztof Halasa Research Institute for Automation and Measurements PIAP Al. Jerozolimskie 202, 02-486 Warsaw, Poland
Quoted 2 lines
In the meantime I've rebased to v3.5.3 and it started to work. Do you think it is worth it investigating v3.4.10 at this point?
BTW I'm not sure if it's a known bug: I closed the /dev/ttyS0 with /dev/gsmmuxX still open, and then tried to set N_TTY ldisc on the master device. It didn't work so well :-(
# killall -9 microcom # they use /dev/gsmmux[0-3] # killall -9 iru # the program messing with ldiscs # ps axf
344 ? Ss 0:00 \_ sshd: root@pts/1 346 pts/1 Ss 0:00 | \_ -sh 405 pts/1 D+ 0:00 | \_ [microcom] 347 ? Ss 0:00 \_ sshd: root@pts/2 349 pts/2 Ss 0:00 | \_ -sh 403 pts/2 D+ 0:00 | \_ [microcom] 406 ? Ss 0:00 \_ sshd: root@pts/3 408 pts/3 Ss 0:00 | \_ -sh 412 pts/3 D+ 0:00 | \_ [microcom] 409 ? Ss 0:00 \_ sshd: root@pts/4 411 pts/4 Ss 0:00 \_ -sh 413 pts/4 D+ 0:00 \_ [microcom] 415 pts/0 D 0:00 iru
Signature · 1 line
Krzysztof Halasa
Quoted 6 lines · On Fri, 07 Sep 2012 14:59:26 +0200 Krzysztof Halasa <[email protected]> wrote:
Quoted 2 lines
In the meantime I've rebased to v3.5.3 and it started to work. Do you think it is worth it investigating v3.4.10 at this point?
BTW I'm not sure if it's a known bug: I closed the
/dev/ttyS0with/dev/gsmmuxXstill open, and then tried to setN_TTYldisc on the master device. It didn't work so well :-(
That should be fixed in 3.7. It's unfixable until the lock splitting work is merged.
Quoted 6 lines · Alan Cox
Quoted 3 lines
BTW I'm not sure if it's a known bug: I closed the
/dev/ttyS0with/dev/gsmmuxXstill open, and then tried to setN_TTYldisc on the master device. It didn't work so well :-(That should be fixed in 3.7. It's unfixable until the lock splitting work is merged.
I see. Thanks.
Signature · 1 line
Krzysztof Halasa