Resend of mach-omap2 sparse IRQ and hardware.h cleanup

index c5811d4..0a87b05 100644
@@ -31,6 +31,8 @@
 /* Move omap4 specific defines to dma-44xx.h */
 #include "dma-44xx.h"
 
+#define INT_DMA_LCD			25
+
 /* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE		0
 #define OMAP_DMA_MCSI1_TX		1

index 37bbbbb..15f497c 100644
@@ -53,7 +53,6 @@
 #define INT_DMA_CH3		22
 #define INT_DMA_CH4		23
 #define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
 #define INT_TIMER1		26
 #define INT_WD_TIMER		27
 #define INT_BRIDGE_PUB		28

index db071bc..40bc06a 100644
@@ -39,6 +39,7 @@
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP1_INT_I2C		(32 + 4)
 
 static const char name[] = "omap_i2c";
 

@@ -105,7 +106,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
 	res = pdev->resource;
 	res[0].start = OMAP1_I2C_BASE;
 	res[0].end = res[0].start + OMAP_I2C_SIZE;
-	res[1].start = INT_I2C;
+	res[1].start = OMAP1_INT_I2C;
 	pdata = &i2c_pdata[bus_id - 1];
 
 	/* all OMAP1 have IP version 1 register set */

index bcd83db..ac59f96 100644
@@ -49,6 +49,8 @@
 #define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
 #define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
 
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt

index 15f497c..fc3959c 100644
@@ -440,9 +440,6 @@
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
-#define INTCPS_NR_MIR_REGS	3
-#define INTCPS_NR_IRQS		96
-
 #include <mach/hardware.h>
 
 #ifdef CONFIG_FIQ

index 53c39d2..9ceec38 100644
@@ -140,7 +140,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

index 290cef5..1a68c1e 100644
@@ -24,7 +24,6 @@ struct omap_nand_platform_data {
 	struct gpmc_timings	*gpmc_t;
 	int			nr_parts;
 	bool			dev_ready;
-	int			gpmc_irq;
 	enum nand_io		xfer_type;
 	int			devsize;
 	enum omap_ecc           ecc_opt;

index 36eee4b..cacc498 100644
@@ -211,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
 static struct twl4030_platform_data sdp2430_twldata = {

index 0f78cdb..c843d01 100644
@@ -229,9 +229,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,

index 04e8574..ee82604 100644
@@ -543,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {

index d94a640..ea34109 100644
@@ -469,9 +469,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }
 
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };
 

index 870a2a5..9032807 100644
@@ -235,9 +235,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),

index 01103b3..5775549 100644
@@ -424,9 +424,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };
 
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };

index c37c2a1..bea2e3a 100644
@@ -274,9 +274,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };
 

index 293e3b2..9d9b2ab 100644
@@ -296,9 +296,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)

index 851aec6..493bd96 100644
@@ -388,9 +388,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };

index a63a49d..8fe7f0c 100644
@@ -77,9 +77,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)

index 633c445..38521d4 100644
@@ -320,9 +320,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 

index 421fb8e..87aa5b1 100644
@@ -278,9 +278,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };

index d3556c9..88dc913 100644
@@ -138,9 +138,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)

index 3911c13..e37ee67 100644
@@ -262,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */

index 193d160..4754f05 100644
@@ -398,9 +398,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };

index 0ad1bb3b..12411b9 100644
@@ -72,9 +72,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
 
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };

index 3b9fc61..e8b6dda 100644
@@ -773,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }
 
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)

index b797cb2..00f73b7 100644
@@ -251,9 +251,6 @@ static void zoom2_set_hs_extmute(int mute)
 }
 
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };
 

index 94256fe..f030880 100644
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */

@@ -428,8 +429,6 @@ no_irqs:
 	twl_gpiochip.dev = &pdev->dev;
 
 	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
-
 		/*
 		 * NOTE:  boards may waste power if they don't set pullups
 		 * and pulldowns correctly ... default for non-ULPI pins is

@@ -461,15 +460,21 @@ no_irqs:
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 

@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;

index 7ea898c..a12a381 100644
@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
 
 /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
 struct twl4030_gpio_platform_data {
-	int		gpio_base;
-	unsigned	irq_base, irq_end;
-
 	/* package the two LED signals as output-only GPIOs? */
 	bool		use_leds;
 

index eaad49f..ba43d48 100644
@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
 
 struct twl6040_platform_data {
 	int audpwron_gpio;	/* audio power-on gpio */
-	unsigned int irq_base;
 
 	struct twl6040_codec_data *codec;
 	struct twl6040_vibra_data *vibra;

index c162369..6f192c4 100644
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <media/soc_camera.h>
 

index 569b687..3b2d907 100644
@@ -39,6 +39,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>

index ebef15e..98e6f39 100644
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000

index 2a48cd2..33f4192 100644
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00

index acf12b7..958ce9a 100644
@@ -17,6 +17,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800

index e737706..ebf86c0 100644
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap1/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>

index f6b14a1..7f4bba9 100644
@@ -14,6 +14,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <mach/hardware.h>
 #include <asm/leds.h>

index ae6dd93..7b1a383 100644
@@ -6,6 +6,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/leds.h>
 #include <asm/mach-types.h>

index 00abda1..029ebdf 100644
@@ -25,6 +25,7 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/am35xx.h>

index ea34109..34cb904 100644
@@ -23,6 +23,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>

index 28187f1..d64f35f 100644
@@ -18,6 +18,8 @@
 #include <video/omapdss.h>
 #include <mach/board-zoom.h>
 
+#include <plat/cpu.h>
+
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56

index 00f73b7..ae5d36b 100644
@@ -19,6 +19,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

index 9ad7d48..7b52bdf 100644
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>

index a9675d8..80399d7 100644
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 #include <plat/mux.h>

index be4d290..5621cc5 100644
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap2/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>

index fb5bc6c..9e57b4a 100644
@@ -23,6 +23,7 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>

index 50cfab6..5b49ebf 100644
@@ -18,7 +18,6 @@
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mcspi.h>
 #include <plat/dmtimer.h>
 #include <plat/l3_2xxx.h>

index 58b5bc1..1fd66f0 100644
@@ -18,7 +18,6 @@
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mcbsp.h>
 #include <plat/mcspi.h>
 #include <plat/dmtimer.h>

index afad69c..c6416c9 100644
@@ -10,7 +10,7 @@
  */
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 #include <plat/mcspi.h>

index c9e3820..5820c73 100644
@@ -15,6 +15,7 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
 #include <mach/irqs.h>

@@ -24,7 +25,6 @@
 #include <plat/l3_3xxx.h>
 #include <plat/l4_3xxx.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mmc.h>
 #include <plat/mcbsp.h>
 #include <plat/mcspi.h>

index 242aee4..fe987f8 100644
@@ -19,12 +19,12 @@
  */
 
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/dma.h>
 #include <plat/mcspi.h>
 #include <plat/mcbsp.h>

index de1caf1..2708a8b 100644
@@ -29,6 +29,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>

index 05bd8f0..90480f7 100644
@@ -28,6 +28,8 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <trace/events/power.h>
 
 #include <asm/suspend.h>

index 39407cb..195aaae 100644
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 
 #include <mach/hardware.h>
 #include <asm/leds.h>

index e6efd77..64fbce3 100644
@@ -25,11 +25,9 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 #define OFF_MODE	1

@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 static int gpio_irq_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned gpio;
+	unsigned gpio = 0;
 	int retval;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+	if (d->irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
+#endif
+
+	if (!gpio)
 		gpio = irq_to_gpio(bank, d->irq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)

index 861ca8f..78a524b 100644
@@ -23,12 +23,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <asm/io.h>
-#include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <linux/gpio.h>
+
 #include <plat/board-ams-delta.h>
 
+#include <mach/hardware.h>
+
 /*
  * MTD structure for E3 (Delta)
  */

similarity index 94%
rename from arch/arm/plat-omap/include/plat/gpio.h
rename to include/linux/platform_data/gpio-omap.h
index 50fb7cc..e8741c2 100644
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
  * OMAP GPIO handling defines and functions
  *
  * Copyright (C) 2003-2005 Nokia Corporation

@@ -155,6 +153,8 @@
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 
+#define OMAP_MAX_GPIO_LINES		192
+
 #define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
 #define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
 

@@ -213,16 +213,5 @@ extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
 
 #endif

index 0e28322..78e1419 100644
@@ -34,6 +34,7 @@
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <plat/mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
 
 /* Register descriptions for twl4030 codec part */
 #include <linux/mfd/twl4030-audio.h>

index a0222db..171d739 100644
@@ -35,16 +35,19 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/keypad.h>
-#include <plat/menelaus.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <plat/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
+#ifdef CONFIG_ARCH_OMAP1
+#define omap_kp_24xx()		0
+#else
+#define omap_kp_24xx()		1
+#endif
+
+static struct omap_kp *omap_kp;
 static void omap_kp_tasklet(unsigned long);
 static void omap_kp_timer(unsigned long);
 

@@ -99,7 +102,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 	struct omap_kp *omap_kp = dev_id;
 
 	/* disable keyboard interrupt and schedule for handling */
-	if (cpu_is_omap24xx()) {
+	if (omap_kp_24xx()) {
 		int i;
 
 		for (i = 0; i < omap_kp->rows; i++) {

@@ -134,7 +137,7 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 	int col = 0;
 
 	/* read the keypad status */
-	if (cpu_is_omap24xx()) {
+	if (omap_kp_24xx()) {
 		/* read the keypad status */
 		for (col = 0; col < omap_kp->cols; col++) {
 			set_col_gpio_val(omap_kp, ~(1 << col));

@@ -222,7 +225,7 @@ static void omap_kp_tasklet(unsigned long data)
 		mod_timer(&omap_kp_data->timer, jiffies + delay);
 	} else {
 		/* enable interrupts */
-		if (cpu_is_omap24xx()) {
+		if (omap_kp_24xx()) {
 			int i;
 			for (i = 0; i < omap_kp_data->rows; i++)
 				enable_irq(gpio_to_irq(row_gpios[i]));

@@ -253,9 +256,9 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute
 	mutex_lock(&kp_enable_mutex);
 	if (state != kp_enable) {
 		if (state)
-			enable_irq(INT_KEYBOARD);
+			enable_irq(omap_kp->irq);
 		else
-			disable_irq(INT_KEYBOARD);
+			disable_irq(omap_kp->irq);
 		kp_enable = state;
 	}
 	mutex_unlock(&kp_enable_mutex);

@@ -286,7 +289,6 @@ static int omap_kp_resume(struct platform_device *dev)
 
 static int __devinit omap_kp_probe(struct platform_device *pdev)
 {
-	struct omap_kp *omap_kp;
 	struct input_dev *input_dev;
 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
 	int i, col_idx, row_idx, irq_idx, ret;

@@ -314,7 +316,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	omap_kp->input = input_dev;
 
 	/* Disable the interrupt for the MPUIO keyboard */
-	if (!cpu_is_omap24xx())
+	if (!omap_kp_24xx())
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	if (pdata->delay)

@@ -328,7 +330,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	omap_kp->rows = pdata->rows;
 	omap_kp->cols = pdata->cols;
 
-	if (cpu_is_omap24xx()) {
+	if (omap_kp_24xx()) {
 		/* Cols: outputs */
 		for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
 			if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {

@@ -394,7 +396,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* scan current status and enable interrupt */
 	omap_kp_scan_keypad(omap_kp, keypad_state);
-	if (!cpu_is_omap24xx()) {
+	if (!omap_kp_24xx()) {
 		omap_kp->irq = platform_get_irq(pdev, 0);
 		if (omap_kp->irq >= 0) {
 			if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,

@@ -439,7 +441,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 
 	/* disable keypad interrupt handling */
 	tasklet_disable(&kp_tasklet);
-	if (cpu_is_omap24xx()) {
+	if (omap_kp_24xx()) {
 		int i;
 		for (i = 0; i < omap_kp->cols; i++)
 			gpio_free(col_gpios[i]);

235 lines not on this page · raw message

index 4b0fcf3..fee195a 100644
@@ -19,7 +19,6 @@
 #include <linux/pm_runtime.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 
 #include "../w1.h"
 #include "../w1_int.h"

@@ -644,7 +643,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
 
 	/* remove module dependency */
 	pm_runtime_disable(&pdev->dev);
-	free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+	free_irq(platform_get_irq(pdev, 0), hdq_data);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(hdq_data->hdq_base);
 	kfree(hdq_data);

index 8123f78..5b3f2fe 100644
@@ -2336,7 +2336,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			serial_port_out(port, UART_EFR, efr);
 	}
 
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
 	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
 	if (cpu_is_omap1510() && is_omap_port(up)) {
 		if (baud == 115200) {

@@ -2426,7 +2426,7 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
 		return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
 	if (is_omap_port(pt))
 		return 0x16 << pt->port.regshift;
 #endif

index c7df34e..7eac01e 100644
@@ -16,6 +16,8 @@
  * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  */
 
+#define L4_34XX_BASE		0x48000000
+
 #include <linux/types.h>
 
 /*  ----------------------------------- Host OS */

index f9609ce..40dc73e 100644
@@ -415,10 +415,10 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 		/* Assert RST1 i.e only the RST only for DSP megacell */
 		if (!status) {
 			/*
-			 * XXX: ioremapping  MUST be removed once ctrl
+			 * XXX: OMAP343X_CTRL_BASE ioremapping  MUST be removed once ctrl
 			 * function is made available.
 			 */
-			void __iomem *ctrl = ioremap(OMAP343X_CTRL_BASE, SZ_4K);
+			void __iomem *ctrl = ioremap(0x48002000, SZ_4K);
 			if (!ctrl)
 				return -ENOMEM;
 

index 870f934..1ed1474 100644
@@ -25,7 +25,8 @@
 #include <dspbridge/host_os.h>
 
 
-#define OMAP34XX_WDT3_BASE 		(L4_PER_34XX_BASE + 0x30000)
+#define OMAP34XX_WDT3_BASE 		(0x49000000 + 0x30000)
+#define INT_34XX_WDT3_IRQ 		36
 
 static struct dsp_wdt_setting dsp_wdt;
 

index cacc498..0900eac 100644
@@ -231,7 +231,7 @@ static int __init omap2430_i2c_init(void)
 	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
 			&sdp2430_twldata);
 	return 0;
 }

index ee82604..31456ea 100644
@@ -579,7 +579,7 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &sdp4430_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+			&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));

index 029ebdf..f8bc860 100644
@@ -296,8 +296,7 @@ static struct resource am3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

index 57204f8..20fe233 100644
@@ -42,6 +42,7 @@
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>
+#include <plat/serial.h>
 
 #include <mach/am35xx.h>
 

@@ -89,8 +90,7 @@ static struct resource cm_t3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

index 9ceec38..901fa1f 100644
@@ -16,8 +16,8 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/onenand.h>

index 5775549..bacb917 100644
@@ -32,6 +32,8 @@
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/serial.h>
+
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>

index 5397209..6e6b175 100644
@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include <plat/menelaus.h>
-#include <mach/irqs.h>
 #include <plat/mcspi.h>
 #include <plat/onenand.h>
 #include <plat/mmc.h>

@@ -599,7 +598,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
 static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
 	{
 		I2C_BOARD_INFO("menelaus", 0x72),
-		.irq = INT_24XX_SYS_NIRQ,
+		.irq = 7 + OMAP_INTC_START,
 		.platform_data = &n8x0_menelaus_platform_data,
 	},
 };

index e37ee67..cbf6fd5 100644
@@ -292,7 +292,7 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+			&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP

index 12411b9..00773a3 100644
@@ -27,6 +27,7 @@
 #include <plat/gpmc.h>
 #include "common.h"
 #include <plat/onenand.h>
+#include <plat/serial.h>
 
 #include "mux.h"
 #include "hsmmc.h"

@@ -84,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
 static void __init rm680_i2c_init(void)
 {
 	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 }

index e8b6dda..4560490 100644
@@ -1047,7 +1047,7 @@ static int __init rx51_i2c_init(void)
 	rx51_twldata.vdac->constraints.apply_uV = true;
 	rx51_twldata.vdac->constraints.name = "VDAC";
 
-	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)

index da4679d..4ca16e3 100644
@@ -20,7 +20,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/irqs.h>
 #include "common.h"
 #include <plat/usb.h>
 

index f64f441..f1100c2 100644
@@ -19,6 +19,7 @@
 
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
+#include <plat/serial.h>
 
 #include <mach/board-zoom.h>
 

index ae5d36b..089024c 100644
@@ -27,6 +27,7 @@
 
 #include "common.h"
 #include <plat/usb.h>
+#include <plat/serial.h>
 
 #include <mach/board-zoom.h>
 

@@ -279,7 +280,7 @@ static int __init omap_i2c_init(void)
 		codec_data->hs_extmute = 1;
 		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
-	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;

index c187586..013fedc 100644
@@ -27,6 +27,7 @@
 #include <plat/mcspi.h>
 #include <plat/nand.h>
 
+#include "common.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \

index 1f65b18..7e60a69 100644
@@ -31,6 +31,8 @@
 #include <plat/common.h>
 #include <asm/proc-fns.h>
 
+#define OMAP_INTC_START		0
+
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else

index f2a49a4..bc27569 100644
@@ -28,7 +28,6 @@
 #include <linux/cpu_pm.h>
 
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 

index 56dfa2d..626e98e 100644
@@ -20,7 +20,6 @@
 #include <linux/platform_data/omap4-keypad.h>
 
 #include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/pmu.h>

@@ -31,6 +30,8 @@
 #include <plat/omap_device.h>
 #include <plat/omap4-keypad.h>
 
+#include "soc.h"
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 #include "devices.h"

@@ -111,7 +112,7 @@ static struct resource omap2cam_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_24XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };

@@ -200,7 +201,7 @@ static struct resource omap3isp_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_34XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };

@@ -434,14 +435,12 @@ static inline void omap_init_mcspi(void) {}
 #endif
 
 static struct resource omap2_pmu_resource = {
-	.start	= 3,
-	.end	= 3,
+	.start	= 3 + OMAP_INTC_START,
 	.flags	= IORESOURCE_IRQ,
 };
 
 static struct resource omap3_pmu_resource = {
-	.start	= INT_34XX_BENCH_MPU_EMUL,
-	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.start	= 3 + OMAP_INTC_START,
 	.flags	= IORESOURCE_IRQ,
 };
 

@@ -474,7 +473,7 @@ static struct resource omap2_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_24XX_SHA1MD5,
+		.start	= 51 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	}
 };

@@ -492,7 +491,7 @@ static struct resource omap3_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_34XX_SHA1MD52_IRQ,
+		.start	= 49 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{

index 3f75ff0..e8ff2da 100644
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
+#include <plat/cpu.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smc91x.h>
 

index 39c30d9..68eead8 100644
@@ -28,8 +28,13 @@
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
 
+#include <plat/cpu.h>
 #include <plat/sdrc.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
 #define GPMC_SYSCONFIG		0x10

@@ -846,16 +851,16 @@ static int __init gpmc_init(void)
 			l = OMAP2420_GPMC_BASE;
 		else
 			l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
+		gpmc_irq = 20 + OMAP_INTC_START;
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
+		gpmc_irq = 20 + OMAP_INTC_START;
 	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		/* Base address and irq number are same for OMAP4/5 */
 		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
-		gpmc_irq = OMAP44XX_IRQ_GPMC;
+		gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
 	}
 
 	if (WARN_ON(!ck))

index 4d2d981..ff6fc5b 100644
@@ -33,6 +33,8 @@
 #include <plat/multi.h>
 #include <plat/dma.h>
 
+#include <mach/hardware.h>
+
 #include "iomap.h"
 #include "voltage.h"
 #include "powerdomain.h"

index 6875be8..e032a73 100644
@@ -16,8 +16,9 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
+
+#include <plat/cpu.h>
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
 
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))

index 577cb77..219a6e8 100644
@@ -18,7 +18,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <mach/irqs.h>
 #include <plat/dma.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>

index 1be8bcb..df298d4 100644
@@ -14,7 +14,9 @@
 #include <linux/platform_device.h>
 
 #include <plat/iommu.h>
-#include <plat/irqs.h>
+
+#include "soc.h"
+#include "common.h"
 
 struct iommu_device {
 	resource_size_t base;

@@ -29,7 +31,7 @@ static int num_iommu_devices;
 static struct iommu_device omap3_devices[] = {
 	{
 		.base = 0x480bd400,
-		.irq = 24,
+		.irq = 24 + OMAP_INTC_START,
 		.pdata = {
 			.name = "isp",
 			.nr_tlb_entries = 8,

@@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = {
 #if defined(CONFIG_OMAP_IOMMU_IVA2)
 	{
 		.base = 0x5d000000,
-		.irq = 28,
+		.irq = 28 + OMAP_INTC_START,
 		.pdata = {
 			.name = "iva2",
 			.nr_tlb_entries = 32,

@@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
 	{
 		.base = OMAP4_MMU1_BASE,
-		.irq = OMAP44XX_IRQ_DUCATI_MMU,
+		.irq = 100 + OMAP44XX_IRQ_GIC_START,
 		.pdata = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,

@@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = {
 	},
 	{
 		.base = OMAP4_MMU2_BASE,
-		.irq = OMAP44XX_IRQ_TESLA_MMU,
+		.irq = 28 + OMAP44XX_IRQ_GIC_START,
 		.pdata = {
 			.name = "tesla",
 			.nr_tlb_entries = 32,

index 05fdebf..95ee7dd 100644
@@ -27,6 +27,7 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 #include <mach/omap-secure.h>
 

index c29dee9..c886325 100644
@@ -16,15 +16,15 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
-#include <plat/irqs.h>
 #include <plat/sram.h>
 #include <plat/omap-secure.h>
 #include <plat/mmc.h>

@@ -35,7 +35,6 @@
 #include "common.h"
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
-#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;

index 5b49ebf..1645d3f 100644
@@ -13,7 +13,6 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>

@@ -161,9 +160,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
 
 /* mailbox */
 static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
-	{ .name = "dsp", .irq = 26 },
-	{ .name = "iva", .irq = 34 },
-	{ .irq = -1 }
+	{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
+	{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mailbox_hwmod = {

@@ -198,9 +197,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
+	{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mcbsp1_hwmod = {

@@ -224,9 +223,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
+	{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
+	{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod omap2420_mcbsp2_hwmod = {

@@ -264,8 +263,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
 
 /* msdi1 */
 static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
-	{ .irq = 83 },
-	{ .irq = -1 }
+	{ .irq = 83 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {

149 lines not on this page · raw message

194 lines not on this page · raw message

index c6416c9..ceb3052 100644
@@ -15,16 +15,14 @@
 #include <plat/dmtimer.h>
 #include <plat/mcspi.h>
 
-#include <mach/irqs.h>
-
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
 #include "wd_timer.h"
 
 struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
-	{ .irq = 48, },
-	{ .irq = -1 }
+	{ .irq = 48 + OMAP_INTC_START, },
+	{ .irq = -1 },
 };
 
 struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {

333 lines not on this page · raw message

index e7e8eea..dddb677 100644
@@ -16,6 +16,7 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "common.h"
 #include "display.h"
 
 /* Common address space across OMAP2xxx */

index d15225f..f0992fd 100644
@@ -28,6 +28,8 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 
+#include <plat/hardware.h>
+
 #include "omap_l3_noc.h"
 
 /*

@@ -190,7 +192,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
 			IRQF_DISABLED, "l3-dbg-irq", l3);
 	if (ret) {
 		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_DBG);
+						9 + OMAP44XX_IRQ_GIC_START);
 		goto err3;
 	}
 

@@ -200,7 +202,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
 			IRQF_DISABLED, "l3-app-irq", l3);
 	if (ret) {
 		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_APP);
+						10 + OMAP44XX_IRQ_GIC_START);
 		goto err4;
 	}
 

index d52651a..d0b4dc7 100644
@@ -28,7 +28,9 @@
 #include <linux/err.h>
 #include <linux/usb.h>
 
+#include <plat/hardware.h>
 #include <plat/usb.h>
+
 #include "control.h"
 
 /* OMAP control module register for UTMI PHY */

index 2708a8b..8af6cd6 100644
@@ -40,8 +40,6 @@
 #include <plat/sram.h>
 #include <plat/dma.h>
 
-#include <mach/irqs.h>
-
 #include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"

index 053e24e..9c9d23c 100644
@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
 #include "clock.h"
 #include "clock2xxx.h"

index a0309de..3601763 100644
@@ -20,7 +20,6 @@
 #include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
 #include "vp.h"
 

@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
 	.nr_regs		= 1,
 	.irqs			= omap3_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
-	.irq			= INT_34XX_PRCM_MPU_IRQ,
+	.irq			= 11 + OMAP_INTC_START,
 	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,

index bb727c2..df2cfe1 100644
@@ -18,8 +18,8 @@
 #include <linux/io.h>
 
 #include <plat/cpu.h>
-#include <plat/irqs.h>
 #include <plat/prcm.h>
+#include <plat/hardware.h>
 
 #include "iomap.h"
 #include "common.h"

@@ -40,7 +40,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.nr_regs		= 2,
 	.irqs			= omap4_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
-	.irq			= OMAP44XX_IRQ_PRCM,
+	.irq			= 11 + OMAP44XX_IRQ_GIC_START,
 	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,

index 03b126d..6b4d332 100644
@@ -26,7 +26,6 @@
 
 #include <plat/common.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"

index 10f7f02..7345267 100644
@@ -33,6 +33,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/serial.h>
 
 #include "prm2xxx_3xxx.h"
 #include "pm.h"

new file mode 100644
index 0000000..40195f1
@@ -0,0 +1 @@
+#include <plat/cpu.h>

index 2ff6d41..3bdaf98 100644
@@ -38,14 +38,17 @@
 #include <linux/slab.h>
 
 #include <asm/mach/time.h>
-#include <plat/dmtimer.h>
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
-#include "common.h"
+
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "powerdomain.h"
 
 /* Parent clocks, eventually these will come from the clock framework */

@@ -373,8 +376,7 @@ OMAP_SYS_TIMER(3_am33xx)
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      OMAP44XX_LOCAL_TWD_BASE,
-			      OMAP44XX_IRQ_LOCALTIMER);
+			      OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
 #endif
 
 static void __init omap4_timer_init(void)

index db5ff66..b0384ce 100644
@@ -26,6 +26,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
+#include <plat/hardware.h>
 #include <plat/i2c.h>
 #include <plat/usb.h>
 

@@ -84,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
 		sizeof(omap4_i2c1_board_info[0].type));
-	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+	omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START;
 	omap4_i2c1_board_info[0].platform_data = pmic_data;
 
 	/* TWL6040 audio IC part */

index 8fe71cf..d109c09 100644
@@ -1,7 +1,7 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
-#include <plat/irqs.h>
+#include "common.h"
 
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)

@@ -40,13 +40,13 @@ void omap_pmic_late_init(void);
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
 {
-	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+	omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 
 static inline void omap3_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
 {
-	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+	omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 
 void omap4_pmic_init(const char *pmic_type,

index dde8a11..14368c3 100644
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 
 #include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
 

index c4a5768..3f35e6c 100644
@@ -27,7 +27,6 @@
 #include <linux/usb/musb.h>
 
 #include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <mach/am35xx.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>

index c0d478e..5da9735 100644
@@ -39,6 +39,7 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_IRQ_GIC_START		32
 #define OMAP44XX_SCU_BASE		0x48240000
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
 #define OMAP44XX_L2CACHE_BASE		0x48242000

index ae05618..2e16627 100644
@@ -18,6 +18,8 @@
 #include <linux/spinlock.h>
 
 #include "virt-dma.h"
+
+#include <plat/cpu.h>
 #include <plat/dma.h>
 
 struct omap_dmadev {

index 1c32afe..f462ff2 100644
@@ -46,6 +46,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 
+#include <plat/cpu.h>
+
 #include "twl-core.h"
 
 /*

index 108ab1a..9d49b1f 100644
@@ -43,6 +43,7 @@
 #include <asm/gpio.h>
 
 #include <plat/dma.h>
+#include <plat/cpu.h>
 
 #define DRIVER_NAME "omap2-onenand"
 

index 5b289c5..ee9e296 100644
@@ -37,6 +37,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
+#include <plat/cpu.h>
 #include <plat/clock.h>
 
 #include <video/omapdss.h>

index fc671d3..3c39aa8 100644
@@ -31,6 +31,7 @@
 #include <linux/omapfb.h>
 
 #include <video/omapdss.h>
+#include <plat/cpu.h>
 #include <plat/vram.h>
 #include <plat/vrfb.h>
 

index d33c48b..f18e488 100644
@@ -27,6 +27,8 @@
 
 #include <plat/mcbsp.h>
 
+#include <plat/cpu.h>
+
 #include "mcbsp.h"
 
 static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)

index acdd3ef..d0ee71d 100644
@@ -32,6 +32,7 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
+#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
 #include "mcbsp.h"