Skip to contentSkip to conversation

opensm: Make it possible to enable opensm with chkconfig

PATCH In review Bart Van Assche 2 participants 3 messages Sep 12, 2012 – Sep 16, 2012 1 message not in the archive InfiniBand

lore
Share & tools
lore

Bart Van Assche

author
#0 lore raw

PATCH 2/6 opensm: Make it possible to enable opensm with chkconfig

The command "chkconfig $service on" enables a service in the "Default-Start" runlevels.

Signed-off-by Bart Van Assche <[email protected]>
---
 scripts/opensm.init.in |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
scripts/opensm.init.in +2 -2
index 0c84bd3..9ec08a2 100644
@@ -9,8 +9,8 @@
 # Provides: opensm
 # Required-Start: $syslog
 # Required-Stop:
-# Default-Start: none
-# Default-Stop: 0 1 6
+# Default-Start: 2 3 5
+# Default-Stop: 0 1 4 6
 # Description:  Manage OpenSM
 ### END INIT INFO
 #
Signature · 6 lines
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Hi Bart,

Quoted 13 lines · Bart Van Assche

The command "chkconfig $service on" enables a service in the "Default-Start" runlevels.

Signed-off-by Bart Van Assche <[email protected]>
---
 scripts/opensm.init.in |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
scripts/opensm.init.in +0 -0
index 0c84bd3..9ec08a2 100644

scripts/opensm.init.in line 13

Quoted 7 lines
scripts/opensm.init.in +2 -2
@@ -9,8 +9,8 @@
 # Provides: opensm
 # Required-Start: $syslog
 # Required-Stop:
-# Default-Start: none
-# Default-Stop: 0 1 6
+# Default-Start: 2 3 5
+# Default-Stop: 0 1 4 6

Why it's needed also to stop on runlevel 4?

-- Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#3 lore raw
Quoted 11 lines · Alex Netes

Hi Bart,

Quoted 8 lines · Bart Van Assche

The command "chkconfig $service on" enables a service in the "Default-Start" runlevels.

Signed-off-by Bart Van Assche <[email protected]>
---
  scripts/opensm.init.in |    4 ++--
  1 files changed, 2 insertions(+), 2 deletions(-)
Quoted 14 lines

scripts/opensm.init.in line 13

Quoted 12 lines
scripts/opensm.init.in +2 -2
index 0c84bd3..9ec08a2 100644
@@ -9,8 +9,8 @@
  # Provides: opensm
  # Required-Start: $syslog
  # Required-Stop:
-# Default-Start: none
-# Default-Stop: 0 1 6
+# Default-Start: 2 3 5
+# Default-Stop: 0 1 4 6

Why it's needed also to stop on runlevel 4?

Good question. As far as I know runlevel 4 is not used. I've noticed though that some Linux distributions (RHEL) enable services in runlevel 4 that are also enabled in runlevel 3. The LSB isn't very clear about this subject though. A quote from http://refspecs.linux-foundation.org/LSB_3.2.0/LSB-Core-generic/LSB-Core-generic/runlevels.html:

0 halt
1 single user mode
2 multiuser with no network services exported
3 normal/full multiuser
4 reserved for local use, default is normal/full multiuser
5 multiuser with a display manager or equivalent
6 reboot

If I interpret the above correctly, enabling opensm in runlevel 4 should be fine on all Linux distributions ?

Bart.

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html