MFD/GPIO: Add twl6040 GPO driver
Subsystems (4)
v2 cover MFD/GPIO: Add twl6040 GPO driver
Hello,
Changes since v1:
- Removed the ti,use-gpo property from DT bindings
- Register the GPO driver if we booted with DT blob or in legacy if the pdata for the GPO driver is present
- DT binding Documentation update
The Documentation update has reference to the twl6040.dtsi file which will be created to hold the common/static properties for the twl6040.
To avoid cross tree merge issues later I have only included the Documentation update to this series and I will send the actual .dtsi/.dts changes via linux-omap. If this is not a problem.
The dependencies for this series are in mainline and I think this series can go via GPIO if Samuel agrees with the changes.
Intro mail from v1:
The following series adds support for the GPO (General Purpose Output) on the twl6040/41 audio chip.
The series has been tested on SDP4430, compile tested for x86_64 and x86_32 bit to be sure it does not introduce build breakage.
Regards,
Peter
---
Peter Ujfalusi (3):
mfd: twl6040: Fix GPO mask
mfd: twl6040: Add twl6040-gpio child
gpio: Add basic support for TWL6040 GPOs
Documentation/devicetree/bindings/mfd/twl6040.txt | 9 +- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-twl6040.c | 137 +++++++++++++++++++++ drivers/mfd/twl6040-core.c | 15 +++ include/linux/mfd/twl6040.h | 11 ++- 6 files changed, 175 insertions(+), 5 deletions(-) create mode 100644 drivers/gpio/gpio-twl6040.c
Signature · 1 line
1.7.8.6
PATCH v2 1/3 mfd: twl6040: Fix GPO mask
--- include/linux/mfd/twl6040.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/mfd/twl6040.h +1 -1
@@ -143,7 +143,7 @@#define TWL6040_GPO1 0x01#define TWL6040_GPO2 0x02 -#define TWL6040_GPO3 0x03 +#define TWL6040_GPO3 0x04/* ACCCTL (0x2D) fields */
Signature · 1 line
1.7.8.6
PATCH v2 2/3 mfd: twl6040: Add twl6040-gpio child
In reply to Peter UjfalusiAdd needed platform data structure and code to be able to load the GPO child of twl6040.
Update the devicetree binding documentation at the same time.
--- Documentation/devicetree/bindings/mfd/twl6040.txt | 9 ++++++--- drivers/mfd/twl6040-core.c | 15 +++++++++++++++ include/linux/mfd/twl6040.h | 9 ++++++++- 3 files changed, 29 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/mfd/twl6040.txt +6 -3
@@ -1,7 +1,7 @@ Texas Instruments TWL6040 family -The TWL6040s are 8-channel high quality low-power audio codecs providing audio -and vibra functionality on OMAP4+ platforms. +The TWL6040s are 8-channel high quality low-power audio codecs providing audio, +vibra and GPO functionality on OMAP4+ platforms. They are connected ot the host processor via i2c for commands, McPDM for audio data and commands.
@@ -10,6 +10,8 @@ Required properties: - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC - interrupt-parent: The parent interrupt controller +- gpio-controller: +- #gpio-cells = <1>: twl6040 provides GPO lines. - twl6040,audpwron-gpio: Power on GPIO line for the twl6040 - vio-supply: Regulator for the twl6040 VIO supply
@@ -37,7 +39,6 @@ Example: &i2c1 { twl6040: twl@4b { compatible = "ti,twl6040"; - reg = <0x4b>; interrupts = <0 119 4>; interrupt-parent = <&gic>;
@@ -60,3 +61,5 @@ Example: }; }; }; + +/include/ "twl6040.dtsi"
drivers/mfd/twl6040-core.c +15 -0
@@ -631,6 +631,21 @@ static int __devinit twl6040_probe(struct i2c_client *client, children++; } +/* +* Enable the GPO driver in the following cases: +* DT booted kernel or legacy boot with valid gpo platform_data +*/ +if (!pdata || (pdata && pdata->gpo)) { + cell = &twl6040->cells[children]; + cell->name ="twl6040-gpo" ; + +if (pdata) { + cell->platform_data = pdata->gpo; + cell->pdata_size =sizeof (*pdata->gpo); + } + children++; + } + ret =mfd_add_devices (&client->dev,-1 , twl6040->cells, children,NULL ,0 );if (ret)
include/linux/mfd/twl6040.h +8 -1
@@ -158,7 +158,7 @@#define TWL6040_VIBROCDET 0x20#define TWL6040_TSHUTDET 0x40 -#define TWL6040_CELLS 2 +#define TWL6040_CELLS 3#define TWL6040_REV_ES1_0 0x00#define TWL6040_REV_ES1_1 0x01/* Rev ES1.1 and ES1.2 */
@@ -176,6 +176,8 @@#define TWL6040_SYSCLK_SEL_LPPLL 0#define TWL6040_SYSCLK_SEL_HPPLL 1 +#define TWL6040_GPO_MAX 3 +struct twl6040_codec_data {u16 hs_left_step;u16 hs_right_step;
@@ -192,12 +194,17 @@ struct twl6040_vibra_data {int vddvibr_uV;/* VDDVIBR volt, set 0 for fixed reg */ }; +struct twl6040_gpo_data { +int gpio_base; +}; +struct twl6040_platform_data {int audpwron_gpio;/* audio power-on gpio */ unsigned int irq_base;struct twl6040_codec_data *codec;struct twl6040_vibra_data *vibra; +struct twl6040_gpo_data *gpo; };struct regmap ;
Signature · 1 line
1.7.8.6
PATCH v2 3/3 gpio: Add basic support for TWL6040 GPOs
In reply to Peter UjfalusiTWL6040 provides GPO lines to be used for controlling external devices.The number of lines different between versions: twl6040 have 3 GPO while TWL6041 have 1.
--- drivers/gpio/Kconfig | 7 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-twl6040.c | 137 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 145 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/gpio-twl6040.c
drivers/gpio/Kconfig +7 -0
@@ -402,6 +402,13 @@ config GPIO_TWL4030 Say yes here to access the GPIO signals of various multi-function power management chips from Texas Instruments. +config GPIO_TWL6040 + tristate "TWL6040 GPO" + depends on TWL6040_CORE + help + Say yes here to access the GPO signals of twl6040 + audio chip from Texas Instruments. + config GPIO_WM831X tristate "WM831x GPIOs" depends on MFD_WM831X
drivers/gpio/Makefile +1 -0
@@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o +obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
drivers/gpio/gpio-twl6040.c new file +137 -0
137 lines not on this page · raw message
Signature · 1 line
1.7.8.6
v2 cover MFD/GPIO: Add twl6040 GPO driver
In reply to Peter UjfalusiHi Samuel, Linus,
Quoted 8 lines · Peter Ujfalusi
Hello,
Changes since v1:
- Removed the ti,use-gpo property from DT bindings
- Register the GPO driver if we booted with DT blob or in legacy if the pdata for the GPO driver is present
- DT binding Documentation update
Quoted 5 lines
The Documentation update has reference to the
twl6040.dtsifile which will be created to hold the common/static properties for the twl6040.
To avoid cross tree merge issues later I have only included the Documentation update to this series and I will send the actual .dtsi/.dts changes via linux-omap. If this is not a problem.
Did you had time to look at this series? Do you want me to resend it?
Thank you,
Péter
Quoted 19 lines
The dependencies for this series are in mainline and I think this series can go via GPIO if Samuel agrees with the changes.
Intro mail from v1:
The following series adds support for the GPO (General Purpose Output) on the twl6040/41 audio chip.
The series has been tested on SDP4430, compile tested forx86_64andx86_32bit to be sure it does not introduce build breakage.Regards,
Peter
---
Peter Ujfalusi (3):
mfd: twl6040: Fix GPO mask
mfd: twl6040: Add twl6040-gpio child
gpio: Add basic support for TWL6040 GPOs
Quoted 9 lines
Documentation/devicetree/bindings/mfd/twl6040.txt | 9 +- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-twl6040.c | 137 +++++++++++++++++++++ drivers/mfd/twl6040-core.c | 15 +++ include/linux/mfd/twl6040.h | 11 ++- 6 files changed, 175 insertions(+), 5 deletions(-) create mode 100644 drivers/gpio/gpio-twl6040.c
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
v2 cover MFD/GPIO: Add twl6040 GPO driver
Quoted 1 line · Peter Ujfalusi
Hi Samuel, Linus,
(...)
Quoted 1 line
Did you had time to look at this series? Do you want me to resend it?
I have provided my ACK on the GPIO part assuming you're taking this series through the MFD tree. There is not more I can do...
Yours,
Linus Walleij
v2 cover MFD/GPIO: Add twl6040 GPO driver
Thanks Linus,
Quoted 8 lines · Linus Walleij
Quoted 1 line · Peter Ujfalusi
Hi Samuel, Linus,
(...)
Quoted 1 line
Did you had time to look at this series? Do you want me to resend it?
I have provided my ACK on the GPIO part assuming you're taking this series through the MFD tree. There is not more I can do...
Samuel: can you take a look at this series and if it is OK with you schedule it for 3.7?
Thank you,
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
v2 cover MFD/GPIO: Add twl6040 GPO driver
In reply to Peter UjfalusiHi Peter,
Quoted 24 lines · Peter Ujfalusi
Hello,
Changes since v1:
- Removed the ti,use-gpo property from DT bindings
- Register the GPO driver if we booted with DT blob or in legacy if the pdata for the GPO driver is present
- DT binding Documentation updateThe Documentation update has reference to the
twl6040.dtsifile which will be created to hold the common/static properties for the twl6040.
To avoid cross tree merge issues later I have only included the Documentation update to this series and I will send the actual .dtsi/.dts changes via linux-omap. If this is not a problem.The dependencies for this series are in mainline and I think this series can go via GPIO if Samuel agrees with the changes.
Intro mail from v1:
The following series adds support for the GPO (General Purpose Output) on the twl6040/41 audio chip.
The series has been tested on SDP4430, compile tested forx86_64andx86_32bit to be sure it does not introduce build breakage.
Quoted 7 lines
Regards,
Peter
---
Peter Ujfalusi (3):
mfd: twl6040: Fix GPO mask
mfd: twl6040: Add twl6040-gpio child
gpio: Add basic support for TWL6040 GPOs
All 3 patches applied, thanks.
Cheers,
Samuel.
Signature · 2 lines
Intel Open Source Technology Centre http://oss.intel.com/
v2 cover MFD/GPIO: Add twl6040 GPO driver
In reply to Peter UjfalusiHi Peter,
Quoted 24 lines · Peter Ujfalusi
Hello,
Changes since v1:
- Removed the ti,use-gpo property from DT bindings
- Register the GPO driver if we booted with DT blob or in legacy if the pdata for the GPO driver is present
- DT binding Documentation updateThe Documentation update has reference to the
twl6040.dtsifile which will be created to hold the common/static properties for the twl6040.
To avoid cross tree merge issues later I have only included the Documentation update to this series and I will send the actual .dtsi/.dts changes via linux-omap. If this is not a problem.The dependencies for this series are in mainline and I think this series can go via GPIO if Samuel agrees with the changes.
Intro mail from v1:
The following series adds support for the GPO (General Purpose Output) on the twl6040/41 audio chip.
The series has been tested on SDP4430, compile tested forx86_64andx86_32bit to be sure it does not introduce build breakage.
Quoted 7 lines
Regards,
Peter
---
Peter Ujfalusi (3):
mfd: twl6040: Fix GPO mask
mfd: twl6040: Add twl6040-gpio child
gpio: Add basic support for TWL6040 GPOs
All 3 patches applied, thanks.
Cheers,
Samuel.
Signature · 2 lines
Intel Open Source Technology Centre http://oss.intel.com/