More omap header moves for common zImage support
Subsystems (21)
Tony Lindgren
maintainercover More omap header moves for common zImage support
Hi all,
Here's a series of mostly automated patches to make more omap headers local for the common zImage support.
I'd like to merge this as a late series via arm-soc after the other changes are merged to avoid further merge conflicts. I can easily regenerate this series on top of the other multiarch changes as needed.
Regards,
Tony
---
Tony Lindgren (29):
ARM: OMAP: Remove unused param.h
ARM: OMAP: Remove smp.h
ARM: OMAP1: Make plat/mux.h omap1 only
ARM: OMAP1: Move board-ams-delta.h from plat to mach
ARM: OMAP2+: Make id.h local
ARM: OMAP1: Move keypad.h from plat to mach
ARM: OMAP1: Move lcd_mipid.h from plat to mach
ARM: OMAP2+: Make board-zoom.h local
ARM: OMAP2+: Make am35xx.h local
ARM: OMAP2+: Make board-rx51.h local
ARM: OMAP2+: Make ctrl_module_core_44xx.h local
ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
ARM: OMAP2+: Make omap-secure.h local
ARM: OMAP2+: Make omap-wakeupgen.h local
ARM: OMAP1: Move board-sx1.h from plat to mach
ARM: OMAP1: Move board-voiceblue.h from plat to mach
ARM: OMAP2+: Make debug-devices.h local
ARM: OMAP1: Move flash.h from plat to mach
ARM: OMAP2+: Make gpmc-smc91x.h local
ARM: OMAP2+: Make gpmc-smsc911x.h local
ARM: OMAP2+: Make hdq1w.h local
ARM: OMAP1: Move irda.h from plat to mach
ARM: OMAP2+: Make l3_2xxx.h local
ARM: OMAP2+: Make l3_3xxx.h local
ARM: OMAP2+: Make l4_2xxx.h local
ARM: OMAP2+: Make l4_3xxx.h local
ARM: OMAP2+: Make omap4-keypad.h local
arch/arm/mach-omap1/ams-delta-fiq-handler.S | 2
arch/arm/mach-omap1/ams-delta-fiq.c | 2
arch/arm/mach-omap1/board-ams-delta.c | 6 +
arch/arm/mach-omap1/board-fsample.c | 6 +
arch/arm/mach-omap1/board-generic.c | 2
arch/arm/mach-omap1/board-h2.c | 8 +-
arch/arm/mach-omap1/board-h3.c | 6 +
arch/arm/mach-omap1/board-htcherald.c | 2
arch/arm/mach-omap1/board-innovator.c | 6 +
arch/arm/mach-omap1/board-nokia770.c | 6 +
arch/arm/mach-omap1/board-osk.c | 6 +
arch/arm/mach-omap1/board-palmte.c | 8 +-
arch/arm/mach-omap1/board-palmtt.c | 8 +-
arch/arm/mach-omap1/board-palmz71.c | 8 +-
arch/arm/mach-omap1/board-perseus2.c | 6 +
arch/arm/mach-omap1/board-sx1-mmc.c | 2
arch/arm/mach-omap1/board-sx1.c | 10 +-
arch/arm/mach-omap1/board-voiceblue.c | 6 +
arch/arm/mach-omap1/devices.c | 2
arch/arm/mach-omap1/flash.c | 2
arch/arm/mach-omap1/i2c.c | 2
arch/arm/mach-omap1/include/mach/board-ams-delta.h | 0
arch/arm/mach-omap1/include/mach/board-sx1.h | 0
arch/arm/mach-omap1/include/mach/board-voiceblue.h | 0
arch/arm/mach-omap1/include/mach/flash.h | 0
arch/arm/mach-omap1/include/mach/irda.h | 0
arch/arm/mach-omap1/include/mach/keypad.h | 0
arch/arm/mach-omap1/include/mach/lcd_mipid.h | 0
arch/arm/mach-omap1/include/mach/mux.h | 0
arch/arm/mach-omap1/include/mach/smp.h | 5 -
arch/arm/mach-omap1/io.c | 2
arch/arm/mach-omap1/mcbsp.c | 2
arch/arm/mach-omap1/mux.c | 58 ++++++++++++-
arch/arm/mach-omap1/pm.c | 2
arch/arm/mach-omap1/serial.c | 2
arch/arm/mach-omap1/usb.c | 2
arch/arm/mach-omap2/am35xx-emac.c | 2
arch/arm/mach-omap2/am35xx.h | 0
arch/arm/mach-omap2/board-2430sdp.c | 2
arch/arm/mach-omap2/board-3430sdp.c | 2
arch/arm/mach-omap2/board-3630sdp.c | 4 -
arch/arm/mach-omap2/board-4430sdp.c | 2
arch/arm/mach-omap2/board-am3517evm.c | 2
arch/arm/mach-omap2/board-cm-t35.c | 2
arch/arm/mach-omap2/board-cm-t3517.c | 2
arch/arm/mach-omap2/board-devkit8000.c | 2
arch/arm/mach-omap2/board-h4.c | 2
arch/arm/mach-omap2/board-igep0020.c | 2
arch/arm/mach-omap2/board-ldp.c | 4 -
arch/arm/mach-omap2/board-omap3evm.c | 2
arch/arm/mach-omap2/board-omap3logic.c | 2
arch/arm/mach-omap2/board-omap3stalker.c | 2
arch/arm/mach-omap2/board-overo.c | 2
arch/arm/mach-omap2/board-rx51-peripherals.c | 4 -
arch/arm/mach-omap2/board-rx51-video.c | 2
arch/arm/mach-omap2/board-rx51.h | 0
arch/arm/mach-omap2/board-zoom-debugboard.c | 4 -
arch/arm/mach-omap2/board-zoom-display.c | 2
arch/arm/mach-omap2/board-zoom-peripherals.c | 16 ----
arch/arm/mach-omap2/board-zoom.c | 2
arch/arm/mach-omap2/board-zoom.h | 0
arch/arm/mach-omap2/common.c | 1
arch/arm/mach-omap2/control.h | 8 +-
arch/arm/mach-omap2/ctrl_module_core_44xx.h | 0
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 0
arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h | 0
arch/arm/mach-omap2/ctrl_module_wkup_44xx.h | 0
arch/arm/mach-omap2/debug-devices.h | 0
arch/arm/mach-omap2/devices.c | 2
arch/arm/mach-omap2/gpmc-smc91x.c | 2
arch/arm/mach-omap2/gpmc-smc91x.h | 0
arch/arm/mach-omap2/gpmc-smsc911x.c | 2
arch/arm/mach-omap2/gpmc-smsc911x.h | 0
arch/arm/mach-omap2/hdq1w.c | 2
arch/arm/mach-omap2/hdq1w.h | 0
arch/arm/mach-omap2/hsmmc.c | 1
arch/arm/mach-omap2/id.c | 2
arch/arm/mach-omap2/id.h | 0
arch/arm/mach-omap2/include/mach/smp.h | 5 -
arch/arm/mach-omap2/l3_2xxx.h | 0
arch/arm/mach-omap2/l3_3xxx.h | 0
arch/arm/mach-omap2/l4_2xxx.h | 0
arch/arm/mach-omap2/l4_3xxx.h | 0
arch/arm/mach-omap2/omap-hotplug.c | 2
arch/arm/mach-omap2/omap-secure.c | 2
arch/arm/mach-omap2/omap-secure.h | 0
arch/arm/mach-omap2/omap-smp.c | 4 -
arch/arm/mach-omap2/omap-wakeupgen.c | 4 -
arch/arm/mach-omap2/omap-wakeupgen.h | 0
arch/arm/mach-omap2/omap4-common.c | 2
arch/arm/mach-omap2/omap4-keypad.h | 0
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 2
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 +
arch/arm/mach-omap2/sleep44xx.S | 2
arch/arm/mach-omap2/usb-musb.c | 2
arch/arm/plat-omap/Makefile | 2
arch/arm/plat-omap/i2c.c | 1
arch/arm/plat-omap/include/plat/omap-serial.h | 2
arch/arm/plat-omap/include/plat/param.h | 8 --
arch/arm/plat-omap/mux.c | 90 --------------------
drivers/input/keyboard/omap-keypad.c | 2
drivers/input/serio/ams_delta_serio.c | 2
drivers/mtd/nand/ams-delta.c | 2
drivers/pcmcia/omap_cf.c | 2
drivers/spi/spi-omap-uwire.c | 2
drivers/usb/host/ohci-omap.c | 2
drivers/usb/musb/tusb6010_omap.c | 1
drivers/usb/otg/isp1301_omap.c | 2
drivers/video/backlight/omap1_bl.c | 2
drivers/video/omap/lcd_ams_delta.c | 2
drivers/video/omap/lcd_mipid.c | 2
drivers/video/omap/lcd_osk.c | 2
sound/soc/omap/ams-delta.c | 2
sound/soc/omap/zoom2.c | 2
117 files changed, 181 insertions(+), 255 deletions(-)
rename arch/arm/{plat-omap/include/plat/board-ams-delta.h => mach-omap1/include/mach/board-ams-delta.h} (100%)
rename arch/arm/{plat-omap/include/plat/board-sx1.h => mach-omap1/include/mach/board-sx1.h} (100%)
rename arch/arm/{plat-omap/include/plat/board-voiceblue.h => mach-omap1/include/mach/board-voiceblue.h} (100%)
rename arch/arm/{plat-omap/include/plat/flash.h => mach-omap1/include/mach/flash.h} (100%)
rename arch/arm/{plat-omap/include/plat/irda.h => mach-omap1/include/mach/irda.h} (100%)
rename arch/arm/{plat-omap/include/plat/keypad.h => mach-omap1/include/mach/keypad.h} (100%)
rename arch/arm/{plat-omap/include/plat/lcd_mipid.h => mach-omap1/include/mach/lcd_mipid.h} (100%)
rename arch/arm/{plat-omap/include/plat/mux.h => mach-omap1/include/mach/mux.h} (100%)
delete mode 100644 arch/arm/mach-omap1/include/mach/smp.h
rename arch/arm/mach-omap2/{include/mach/am35xx.h => am35xx.h} (100%)
rename arch/arm/mach-omap2/{include/mach/board-rx51.h => board-rx51.h} (100%)
rename arch/arm/mach-omap2/{include/mach/board-zoom.h => board-zoom.h} (100%)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_core_44xx.h => ctrl_module_core_44xx.h} (100%)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_pad_core_44xx.h => ctrl_module_pad_core_44xx.h} (100%)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_pad_wkup_44xx.h => ctrl_module_pad_wkup_44xx.h} (100%)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_wkup_44xx.h => ctrl_module_wkup_44xx.h} (100%)
rename arch/arm/{plat-omap/include/plat/debug-devices.h => mach-omap2/debug-devices.h} (100%)
rename arch/arm/{plat-omap/include/plat/gpmc-smc91x.h => mach-omap2/gpmc-smc91x.h} (100%)
rename arch/arm/{plat-omap/include/plat/gpmc-smsc911x.h => mach-omap2/gpmc-smsc911x.h} (100%)
rename arch/arm/{plat-omap/include/plat/hdq1w.h => mach-omap2/hdq1w.h} (100%)
rename arch/arm/mach-omap2/{include/mach/id.h => id.h} (100%)
delete mode 100644 arch/arm/mach-omap2/include/mach/smp.h
rename arch/arm/{plat-omap/include/plat/l3_2xxx.h => mach-omap2/l3_2xxx.h} (100%)
rename arch/arm/{plat-omap/include/plat/l3_3xxx.h => mach-omap2/l3_3xxx.h} (100%)
rename arch/arm/{plat-omap/include/plat/l4_2xxx.h => mach-omap2/l4_2xxx.h} (100%)
rename arch/arm/{plat-omap/include/plat/l4_3xxx.h => mach-omap2/l4_3xxx.h} (100%)
rename arch/arm/mach-omap2/{include/mach/omap-secure.h => omap-secure.h} (100%)
rename arch/arm/mach-omap2/{include/mach/omap-wakeupgen.h => omap-wakeupgen.h} (100%)
rename arch/arm/{plat-omap/include/plat/omap4-keypad.h => mach-omap2/omap4-keypad.h} (100%)
delete mode 100644 arch/arm/plat-omap/include/plat/param.h
delete mode 100644 arch/arm/plat-omap/mux.cSignature · 1 line
Signature
Tony Lindgren
maintainerPATCH 1/29 ARM: OMAP: Remove unused param.h
This is no longer needed.
--- arch/arm/plat-omap/include/plat/param.h | 8 -------- 1 file changed, 8 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/param.h
arch/arm/plat-omap/include/plat/param.h deleted +0 -8
@@ -1,8 +0,0 @@ -/* -* arch/arm/plat-omap/include/mach/param.h -* -*/ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif
Tony Lindgren
maintainerPATCH 2/29 ARM: OMAP: Remove smp.h
In reply to Tony LindgrenThis is no longer needed.
--- arch/arm/mach-omap1/include/mach/smp.h | 5 ----- arch/arm/mach-omap2/include/mach/smp.h | 5 ----- 2 files changed, 10 deletions(-) delete mode 100644 arch/arm/mach-omap1/include/mach/smp.h delete mode 100644 arch/arm/mach-omap2/include/mach/smp.h
arch/arm/mach-omap1/include/mach/smp.h deleted +0 -5
@@ -1,5 +0,0 @@ -/* -* arch/arm/mach-omap1/include/mach/smp.h -*/ - -#include <plat/smp.h>
arch/arm/mach-omap2/include/mach/smp.h deleted +0 -5
@@ -1,5 +0,0 @@ -/* -* arch/arm/mach-omap2/include/mach/smp.h -*/ - -#include <plat/smp.h>
Tony Lindgren
maintainerPATCH 3/29 ARM: OMAP1: Make plat/mux.h omap1 only
In reply to Tony LindgrenWe are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap.
---
arch/arm/mach-omap1/board-ams-delta.c | 2 -
arch/arm/mach-omap1/board-fsample.c | 2 -
arch/arm/mach-omap1/board-generic.c | 2 -
arch/arm/mach-omap1/board-h2.c | 2 -
arch/arm/mach-omap1/board-h3.c | 2 -
arch/arm/mach-omap1/board-innovator.c | 2 -
arch/arm/mach-omap1/board-nokia770.c | 2 -
arch/arm/mach-omap1/board-osk.c | 2 -
arch/arm/mach-omap1/board-palmte.c | 2 -
arch/arm/mach-omap1/board-palmtt.c | 2 -
arch/arm/mach-omap1/board-palmz71.c | 2 -
arch/arm/mach-omap1/board-perseus2.c | 2 -
arch/arm/mach-omap1/board-sx1.c | 2 -
arch/arm/mach-omap1/board-voiceblue.c | 2 -
arch/arm/mach-omap1/devices.c | 2 -
arch/arm/mach-omap1/i2c.c | 2 -
arch/arm/mach-omap1/include/mach/mux.h | 0
arch/arm/mach-omap1/io.c | 2 -
arch/arm/mach-omap1/mcbsp.c | 2 -
arch/arm/mach-omap1/mux.c | 58 ++++++++++++++++
arch/arm/mach-omap1/pm.c | 2 -
arch/arm/mach-omap1/serial.c | 2 -
arch/arm/mach-omap1/usb.c | 2 -
arch/arm/mach-omap2/common.c | 1
arch/arm/mach-omap2/hsmmc.c | 1
arch/arm/plat-omap/Makefile | 2 -
arch/arm/plat-omap/i2c.c | 1
arch/arm/plat-omap/include/plat/omap-serial.h | 2 -
arch/arm/plat-omap/mux.c | 90 -------------------------
drivers/pcmcia/omap_cf.c | 2 -
drivers/spi/spi-omap-uwire.c | 2 -
drivers/usb/host/ohci-omap.c | 2 -
drivers/usb/musb/tusb6010_omap.c | 1
drivers/usb/otg/isp1301_omap.c | 2 -
drivers/video/backlight/omap1_bl.c | 2 -
drivers/video/omap/lcd_osk.c | 2 -
36 files changed, 84 insertions(+), 126 deletions(-)
rename arch/arm/{plat-omap/include/plat/mux.h => mach-omap1/include/mach/mux.h} (100%)
delete mode 100644 arch/arm/plat-omap/mux.carch/arm/mach-omap1/board-ams-delta.c +1 -1
@@ -37,7 +37,7 @@#include <plat/board-ams-delta.h> #include <plat/keypad.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h>
arch/arm/mach-omap1/board-fsample.c +1 -1
@@ -28,7 +28,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h>
arch/arm/mach-omap1/board-generic.c +1 -1
@@ -22,7 +22,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h>
arch/arm/mach-omap1/board-h2.c +1 -1
@@ -38,7 +38,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h>
arch/arm/mach-omap1/board-h3.c +1 -1
@@ -40,7 +40,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/keypad.h> #include <plat/dma.h>
arch/arm/mach-omap1/board-innovator.c +1 -1
@@ -31,7 +31,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h>
arch/arm/mach-omap1/board-nokia770.c +1 -1
@@ -25,7 +25,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h>
arch/arm/mach-omap1/board-osk.c +1 -1
@@ -47,7 +47,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-palmte.c +1 -1
@@ -35,7 +35,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> #include <plat/irda.h>
arch/arm/mach-omap1/board-palmtt.c +1 -1
@@ -35,7 +35,7 @@#include <plat/led.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h>
arch/arm/mach-omap1/board-palmz71.c +1 -1
@@ -37,7 +37,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h>
arch/arm/mach-omap1/board-perseus2.c +1 -1
@@ -28,7 +28,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h>
arch/arm/mach-omap1/board-sx1.c +1 -1
@@ -34,7 +34,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/irda.h> #include <plat/tc.h>
arch/arm/mach-omap1/board-voiceblue.c +1 -1
@@ -33,7 +33,7 @@#include <plat/board-voiceblue.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <mach/hardware.h>
arch/arm/mach-omap1/devices.c +1 -1
@@ -20,7 +20,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/mmc.h>
arch/arm/mach-omap1/i2c.c +1 -1
@@ -20,7 +20,7 @@*/ #include <plat/i2c.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> void __init omap1_i2c_mux_pins (int bus_id)
arch/arm/mach-omap1/include/mach/mux.h renamed from arch/arm/plat-omap/include/plat/mux.h +0 -0
arch/arm/mach-omap1/io.c +1 -1
@@ -16,7 +16,7 @@#include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h>
arch/arm/mach-omap1/mcbsp.c +1 -1
@@ -20,7 +20,7 @@#include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h>
arch/arm/mach-omap1/mux.c +56 -2
73 lines not on this page · raw message
arch/arm/mach-omap1/pm.c +1 -1
@@ -53,7 +53,7 @@#include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/dmtimer.h>
arch/arm/mach-omap1/serial.c +1 -1
@@ -22,7 +22,7 @@#include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include "pm.h"
arch/arm/mach-omap1/usb.c +1 -1
@@ -26,7 +26,7 @@#include <asm/irq.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h>
arch/arm/mach-omap2/common.c +0 -1
@@ -17,7 +17,6 @@#include <linux/clk.h> #include <linux/io.h> -#include <plat/mux.h> #include <plat/clock.h> #include "soc.h"
arch/arm/mach-omap2/hsmmc.c +0 -1
@@ -19,7 +19,6 @@#include <plat/mmc.h> #include <plat/omap-pm.h> -#include <plat/mux.h> #include <plat/omap_device.h> #include "mux.h"
arch/arm/plat-omap/Makefile +1 -1
@@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o +obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- :=
arch/arm/plat-omap/i2c.c +0 -1
@@ -32,7 +32,6 @@#include <linux/clk.h> #include <mach/irqs.h> -#include <plat/mux.h> #include <plat/i2c.h> #include <plat/omap-pm.h> #include <plat/omap_device.h>
arch/arm/plat-omap/include/plat/omap-serial.h +0 -2
@@ -21,8 +21,6 @@#include <linux/device.h> #include <linux/pm_qos.h> -#include <plat/mux.h> -#define DRIVER_NAME "omap_uart"/*
arch/arm/plat-omap/mux.c deleted +0 -90
90 lines not on this page · raw message
drivers/pcmcia/omap_cf.c +1 -1
@@ -24,7 +24,7 @@#include <asm/io.h> #include <asm/sizes.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h>
drivers/spi/spi-omap-uwire.c +1 -1
@@ -52,7 +52,7 @@#include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
drivers/usb/host/ohci-omap.c +1 -1
@@ -24,7 +24,7 @@#include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <mach/hardware.h>
drivers/usb/musb/tusb6010_omap.c +0 -1
@@ -17,7 +17,6 @@#include <linux/dma-mapping.h> #include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> #include "musb_core.h" #include "tusb6010.h"
drivers/usb/otg/isp1301_omap.c +1 -1
@@ -36,7 +36,7 @@#include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h>
drivers/video/backlight/omap1_bl.c +1 -1
@@ -30,7 +30,7 @@#include <linux/platform_data/omap1_bl.h> #include <mach/hardware.h> -#include <plat/mux.h> +#include <mach/mux.h> #define OMAPBL_MAX_INTENSITY 0xff
drivers/video/omap/lcd_osk.c +1 -1
@@ -24,7 +24,7 @@#include <linux/platform_device.h> #include <asm/gpio.h> -#include <plat/mux.h> +#include <mach/mux.h> #include "omapfb.h" static int osk_panel_init (struct lcd_panel *panel,struct omapfb_device *fbdev)
PATCH 3/29 ARM: OMAP1: Make plat/mux.h omap1 only
Quoted 4 lines · Tony Lindgren
We are moving omap2+ to use the device tree based
pinctrl-single.cand will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap.
Quoted 11 lines
Cc Felipe Balbi <[email protected]>Cc Grant Likely <[email protected]>Cc Alan Stern <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Richard Purdie <[email protected]>Cc Florian Tobias Schandinat <[email protected]>Cc Tomi Valkeinen <[email protected]>Cc linux-usb at vger.kernel.orgCc linux-pcmcia at lists.infradead.orgCc spi-devel-general at lists.sourceforge.netSigned-off-by Tony Lindgren <[email protected]>
for drivers/usb:
Quoted 647 lines
--- arch/arm/mach-omap1/board-ams-delta.c | 2 - arch/arm/mach-omap1/board-fsample.c | 2 - arch/arm/mach-omap1/board-generic.c | 2 - arch/arm/mach-omap1/board-h2.c | 2 - arch/arm/mach-omap1/board-h3.c | 2 - arch/arm/mach-omap1/board-innovator.c | 2 - arch/arm/mach-omap1/board-nokia770.c | 2 - arch/arm/mach-omap1/board-osk.c | 2 - arch/arm/mach-omap1/board-palmte.c | 2 - arch/arm/mach-omap1/board-palmtt.c | 2 - arch/arm/mach-omap1/board-palmz71.c | 2 - arch/arm/mach-omap1/board-perseus2.c | 2 - arch/arm/mach-omap1/board-sx1.c | 2 - arch/arm/mach-omap1/board-voiceblue.c | 2 - arch/arm/mach-omap1/devices.c | 2 - arch/arm/mach-omap1/i2c.c | 2 - arch/arm/mach-omap1/include/mach/mux.h | 0 arch/arm/mach-omap1/io.c | 2 - arch/arm/mach-omap1/mcbsp.c | 2 - arch/arm/mach-omap1/mux.c | 58 ++++++++++++++++ arch/arm/mach-omap1/pm.c | 2 - arch/arm/mach-omap1/serial.c | 2 - arch/arm/mach-omap1/usb.c | 2 - arch/arm/mach-omap2/common.c | 1 arch/arm/mach-omap2/hsmmc.c | 1 arch/arm/plat-omap/Makefile | 2 - arch/arm/plat-omap/i2c.c | 1 arch/arm/plat-omap/include/plat/omap-serial.h | 2 - arch/arm/plat-omap/mux.c | 90 ------------------------- drivers/pcmcia/omap_cf.c | 2 - drivers/spi/spi-omap-uwire.c | 2 - drivers/usb/host/ohci-omap.c | 2 - drivers/usb/musb/tusb6010_omap.c | 1 drivers/usb/otg/isp1301_omap.c | 2 - drivers/video/backlight/omap1_bl.c | 2 - drivers/video/omap/lcd_osk.c | 2 - 36 files changed, 84 insertions(+), 126 deletions(-) rename arch/arm/{plat-omap/include/plat/mux.h => mach-omap1/include/mach/mux.h} (100%) delete mode 100644 arch/arm/plat-omap/mux.carch/arm/mach-omap1/board-ams-delta.c +1
-1@@ -37,7 +37,7 @@#include <plat/board-ams-delta.h> #include <plat/keypad.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> arch/arm/mach-omap1/board-fsample.c +1
-1@@ -28,7 +28,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> arch/arm/mach-omap1/board-generic.c +1
-1@@ -22,7 +22,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> arch/arm/mach-omap1/board-h2.c +1
-1@@ -38,7 +38,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> arch/arm/mach-omap1/board-h3.c +1
-1@@ -40,7 +40,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/keypad.h> #include <plat/dma.h> arch/arm/mach-omap1/board-innovator.c +1
-1@@ -31,7 +31,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h> arch/arm/mach-omap1/board-nokia770.c +1
-1@@ -25,7 +25,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> arch/arm/mach-omap1/board-osk.c +1
-1@@ -47,7 +47,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <mach/hardware.h> arch/arm/mach-omap1/board-palmte.c +1
-1@@ -35,7 +35,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> #include <plat/irda.h> arch/arm/mach-omap1/board-palmtt.c +1
-1@@ -35,7 +35,7 @@#include <plat/led.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> arch/arm/mach-omap1/board-palmz71.c +1
-1@@ -37,7 +37,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> arch/arm/mach-omap1/board-perseus2.c +1
-1@@ -28,7 +28,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <plat/flash.h> #include <plat/keypad.h> arch/arm/mach-omap1/board-sx1.c +1
-1@@ -34,7 +34,7 @@#include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/irda.h> #include <plat/tc.h> arch/arm/mach-omap1/board-voiceblue.c +1
-1@@ -33,7 +33,7 @@#include <plat/board-voiceblue.h> #include <plat/flash.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <mach/hardware.h> arch/arm/mach-omap1/devices.c +1
-1@@ -20,7 +20,7 @@#include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/mmc.h> arch/arm/mach-omap1/i2c.c +1
-1@@ -20,7 +20,7 @@*/ #include <plat/i2c.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> void __init omap1_i2c_mux_pins (int bus_id)arch/arm/mach-omap1/include/mach/mux.h renamed from arch/arm/plat-omap/include/plat/mux.h +0
-0arch/arm/mach-omap1/io.c +1
-1@@ -16,7 +16,7 @@#include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> arch/arm/mach-omap1/mcbsp.c +1
-1@@ -20,7 +20,7 @@#include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> arch/arm/mach-omap1/mux.c +56
-2@@ -29,7 +29,7 @@#include <mach/hardware.h> -#include <plat/mux.h> +#include <mach/mux.h> #ifdef CONFIG_OMAP_MUX @@ -451,6 +451,56 @@ static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)#endif } +static struct omap_mux_cfg *mux_cfg; + +int __init omap_mux_register (struct omap_mux_cfg *arch_mux_cfg) +{ +if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size ==0 + || !arch_mux_cfg->cfg_reg) { +printk (KERN_ERR "Invalid pin table\n" ); +return -EINVAL ; + } + + mux_cfg = arch_mux_cfg; + +return 0 ; +} + +/* +* Sets the Omap MUX and PULL_DWN registers based on the table +*/ +int __init_or_module omap_cfg_reg(const unsigned long index) +{ +struct pin_config *reg; + +if (!cpu_class_is_omap1 ()) { +printk (KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n" , + index); +WARN_ON (1 ); +return -EINVAL ; + } + +if (mux_cfg ==NULL ) { +printk (KERN_ERR "Pin mux table not initialized\n" ); +return -ENODEV ; + } + +if (index >= mux_cfg->size) { +printk (KERN_ERR "Invalid pin mux index: %lu (%lu)\n" , + index, mux_cfg->size); +dump_stack (); +return -ENODEV ; + } + + reg = &mux_cfg->pins[index]; + +if (!mux_cfg->cfg_reg) +return -ENODEV ; + +return mux_cfg->cfg_reg (reg); +} +EXPORT_SYMBOL (omap_cfg_reg); +int __init omap1_mux_init (void ) {if (cpu_is_omap7xx ()) {@@ -468,4 +518,8 @@ int __init omap1_mux_init(void) return omap_mux_register(&arch_mux_cfg); } -#endif +#else +#define omap_mux_init () do {} while(0) +#define omap_cfg_reg (x) do {} while(0) +#endif /* CONFIG_OMAP_MUX */ +arch/arm/mach-omap1/pm.c +1
-1@@ -53,7 +53,7 @@#include <plat/clock.h> #include <plat/sram.h> #include <plat/tc.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/dma.h> #include <plat/dmtimer.h> arch/arm/mach-omap1/serial.c +1
-1@@ -22,7 +22,7 @@#include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include "pm.h" arch/arm/mach-omap1/usb.c +1
-1@@ -26,7 +26,7 @@#include <asm/irq.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> arch/arm/mach-omap2/common.c +0
-1@@ -17,7 +17,6 @@#include <linux/clk.h> #include <linux/io.h> -#include <plat/mux.h> #include <plat/clock.h> #include "soc.h" arch/arm/mach-omap2/hsmmc.c +0
-1@@ -19,7 +19,6 @@#include <plat/mmc.h> #include <plat/omap-pm.h> -#include <plat/mux.h> #include <plat/omap_device.h> #include "mux.h" arch/arm/plat-omap/Makefile +1
-1@@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o +obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- :=arch/arm/plat-omap/i2c.c +0
-1@@ -32,7 +32,6 @@#include <linux/clk.h> #include <mach/irqs.h> -#include <plat/mux.h> #include <plat/i2c.h> #include <plat/omap-pm.h> #include <plat/omap_device.h> arch/arm/plat-omap/include/plat/omap-serial.h +0
-2@@ -21,8 +21,6 @@#include <linux/device.h> #include <linux/pm_qos.h> -#include <plat/mux.h> -#define DRIVER_NAME "omap_uart"/* arch/arm/plat-omap/mux.c deleted +0
-90@@ -1,90 +0,0 @@ -/* -* linux/arch/arm/plat-omap/mux.c -* -* Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h -* -* Copyright (C) 2003 - 2008 Nokia Corporation -* -* Written by Tony Lindgren -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -* -*/ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm/system.h> - -#include <plat/cpu.h> -#include <plat/mux.h> - -#ifdef CONFIG_OMAP_MUX - -static struct omap_mux_cfg *mux_cfg; - -int __init omap_mux_register (struct omap_mux_cfg *arch_mux_cfg) -{ -if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size ==0 - || !arch_mux_cfg->cfg_reg) { -printk (KERN_ERR "Invalid pin table\n" ); -return -EINVAL ; - } - - mux_cfg = arch_mux_cfg; - -return 0 ; -} - -/* -* Sets the Omap MUX and PULL_DWN registers based on the table -*/ -int __init_or_module omap_cfg_reg(const unsigned long index) -{ -struct pin_config *reg; - -if (!cpu_class_is_omap1 ()) { -printk (KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n" , - index); -WARN_ON (1 ); -return -EINVAL ; - } - -if (mux_cfg ==NULL ) { -printk (KERN_ERR "Pin mux table not initialized\n" ); -return -ENODEV ; - } - -if (index >= mux_cfg->size) { -printk (KERN_ERR "Invalid pin mux index: %lu (%lu)\n" , - index, mux_cfg->size); -dump_stack (); -return -ENODEV ; - } - - reg = &mux_cfg->pins[index]; - -if (!mux_cfg->cfg_reg) -return -ENODEV ; - -return mux_cfg->cfg_reg (reg); -} -EXPORT_SYMBOL (omap_cfg_reg); -#else -#define omap_mux_init () do {} while(0) -#define omap_cfg_reg (x) do {} while(0) -#endif /* CONFIG_OMAP_MUX */ drivers/pcmcia/omap_cf.c +1
-1@@ -24,7 +24,7 @@#include <asm/io.h> #include <asm/sizes.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> drivers/spi/spi-omap-uwire.c +1
-1@@ -52,7 +52,7 @@#include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ drivers/usb/host/ohci-omap.c +1
-1@@ -24,7 +24,7 @@#include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <mach/hardware.h> drivers/usb/musb/tusb6010_omap.c +0
-1@@ -17,7 +17,6 @@#include <linux/dma-mapping.h> #include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> #include "musb_core.h" #include "tusb6010.h" drivers/usb/otg/isp1301_omap.c +1
-1@@ -36,7 +36,7 @@#include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> drivers/video/backlight/omap1_bl.c +1
-1@@ -30,7 +30,7 @@#include <linux/platform_data/omap1_bl.h> #include <mach/hardware.h> -#include <plat/mux.h> +#include <mach/mux.h> #define OMAPBL_MAX_INTENSITY 0xffdrivers/video/omap/lcd_osk.c +1
-1@@ -24,7 +24,7 @@#include <linux/platform_device.h> #include <asm/gpio.h> -#include <plat/mux.h> +#include <mach/mux.h> #include "omapfb.h" static int osk_panel_init (struct lcd_panel *panel,struct omapfb_device *fbdev)
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120920/27c27772/attachment.sig>
Tony Lindgren
maintainerPATCH 4/29 ARM: OMAP1: Move board-ams-delta.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
And to fix things properly, this should not be included from the drivers at all.
---
arch/arm/mach-omap1/ams-delta-fiq-handler.S | 2 +-
arch/arm/mach-omap1/ams-delta-fiq.c | 2 +-
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/include/mach/board-ams-delta.h | 0
drivers/input/serio/ams_delta_serio.c | 2 +-
drivers/mtd/nand/ams-delta.c | 2 +-
drivers/video/omap/lcd_ams_delta.c | 2 +-
sound/soc/omap/ams-delta.c | 2 +-
8 files changed, 7 insertions(+), 7 deletions(-)
rename arch/arm/{plat-omap/include/plat/board-ams-delta.h => mach-omap1/include/mach/board-ams-delta.h} (100%)arch/arm/mach-omap1/ams-delta-fiq-handler.S +1 -1
@@ -16,7 +16,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <mach/irqs.h> #include <mach/ams-delta-fiq.h>
arch/arm/mach-omap1/ams-delta-fiq.c +1 -1
@@ -19,7 +19,7 @@#include <linux/module.h> #include <linux/io.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <asm/fiq.h>
arch/arm/mach-omap1/board-ams-delta.c +1 -1
@@ -35,7 +35,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <plat/keypad.h> #include <mach/mux.h>
arch/arm/mach-omap1/include/mach/board-ams-delta.h renamed from arch/arm/plat-omap/include/plat/board-ams-delta.h +0 -0
drivers/input/serio/ams_delta_serio.c +1 -1
@@ -27,7 +27,7 @@#include <linux/module.h> #include <asm/mach-types.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <mach/ams-delta-fiq.h>
drivers/mtd/nand/ams-delta.c +1 -1
@@ -29,7 +29,7 @@#include <asm/io.h> #include <asm/sizes.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <mach/hardware.h>
drivers/video/omap/lcd_ams_delta.c +1 -1
@@ -27,7 +27,7 @@#include <linux/lcd.h> #include <linux/gpio.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include "omapfb.h"
sound/soc/omap/ams-delta.c +1 -1
@@ -32,7 +32,7 @@#include <asm/mach-types.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <plat/mcbsp.h> #include "omap-mcbsp.h"
Re: [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach
Quoted 4 lines · Tony Lindgren
This is only used by omap1.
And to fix things properly, this should not be included from the drivers at all.
or I can apply it if that's easier.
Tony Lindgren
maintainerRe: [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach
Quoted 9 lines · Mark Brown
Quoted 4 lines · Tony Lindgren
This is only used by omap1.
And to fix things properly, this should not be included from the drivers at all.
Acked-by Mark Brown <[email protected]>or I can apply it if that's easier.
Thanks I'll do a series for Arnd on top of the multiplatform changes to avoid more merge conflicts.
Regards,
Tony
Re: [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach
In reply to Tony LindgrenQuoted 4 lines · On Wed, 19 Sep 2012 14:05:43 Tony Lindgren wrote:
This is only used by omap1.
And to fix things properly, this should not be included from the drivers at all.
I'll take care of updating the drivers when I have some spare time.
Thanks,
Janusz
Tony Lindgren
maintainerRe: [PATCH 04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach
Quoted 9 lines · Janusz Krzysztofik
Quoted 4 lines · On Wed, 19 Sep 2012 14:05:43 Tony Lindgren wrote:
This is only used by omap1.
And to fix things properly, this should not be included from the drivers at all.
I'll take care of updating the drivers when I have some spare time.
Thanks those can be fixed by passing them in the platform data.
Regards,
Tony
Tony Lindgren
maintainerPATCH 5/29 ARM: OMAP2+: Make id.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-devkit8000.c | 2 +-
arch/arm/mach-omap2/id.c | 2 +-
arch/arm/mach-omap2/id.h | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/mach-omap2/{include/mach/id.h => id.h} (100%)arch/arm/mach-omap2/board-devkit8000.c +1 -1
@@ -32,7 +32,7 @@#include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <mach/id.h> +#include "id.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h>
arch/arm/mach-omap2/id.c +1 -1
@@ -23,7 +23,7 @@#include "common.h" -#include <mach/id.h> +#include "id.h" #include "soc.h" #include "control.h"
arch/arm/mach-omap2/id.h renamed from arch/arm/mach-omap2/include/mach/id.h +0 -0
Tony Lindgren
maintainerPATCH 6/29 ARM: OMAP1: Move keypad.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-ams-delta.c | 2 +-
arch/arm/mach-omap1/board-fsample.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-htcherald.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-perseus2.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/include/mach/keypad.h | 0
drivers/input/keyboard/omap-keypad.c | 2 +-
15 files changed, 14 insertions(+), 14 deletions(-)
rename arch/arm/{plat-omap/include/plat/keypad.h => mach-omap1/include/mach/keypad.h} (100%)arch/arm/mach-omap1/board-ams-delta.c +1 -1
@@ -36,7 +36,7 @@#include <asm/mach/map.h> #include <mach/board-ams-delta.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/mux.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-fsample.c +1 -1
@@ -31,7 +31,7 @@#include <mach/mux.h> #include <plat/flash.h> #include <plat/fpga.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-h2.c +1 -1
@@ -42,7 +42,7 @@#include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/flash.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-h3.c +1 -1
@@ -42,7 +42,7 @@#include <mach/mux.h> #include <plat/tc.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/dma.h> #include <plat/flash.h>
arch/arm/mach-omap1/board-htcherald.c +1 -1
@@ -42,7 +42,7 @@#include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/mmc.h> #include <mach/irqs.h>
arch/arm/mach-omap1/board-innovator.c +1 -1
@@ -35,7 +35,7 @@#include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/mmc.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-nokia770.c +1 -1
@@ -26,7 +26,7 @@#include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h>
arch/arm/mach-omap1/board-osk.c +1 -1
@@ -304,7 +304,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = {#include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <plat/keypad.h> +#include <mach/keypad.h> static struct at24_platform_data at24c04 = { .byte_len =SZ_4K /8 ,
arch/arm/mach-omap1/board-palmte.c +1 -1
@@ -39,7 +39,7 @@#include <plat/tc.h> #include <plat/dma.h> #include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/hardware.h> #include <mach/usb.h>
arch/arm/mach-omap1/board-palmtt.c +1 -1
@@ -39,7 +39,7 @@#include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/hardware.h> #include <mach/usb.h>
arch/arm/mach-omap1/board-palmz71.c +1 -1
@@ -41,7 +41,7 @@#include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/hardware.h> #include <mach/usb.h>
arch/arm/mach-omap1/board-perseus2.c +1 -1
@@ -31,7 +31,7 @@#include <mach/mux.h> #include <plat/fpga.h> #include <plat/flash.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-sx1.c +1 -1
@@ -38,7 +38,7 @@#include <plat/dma.h> #include <plat/irda.h> #include <plat/tc.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #include <plat/board-sx1.h> #include <mach/hardware.h>
arch/arm/mach-omap1/include/mach/keypad.h renamed from arch/arm/plat-omap/include/plat/keypad.h +0 -0
drivers/input/keyboard/omap-keypad.c +1 -1
@@ -37,7 +37,7 @@#include <linux/slab.h> #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/keypad.h> +#include <mach/keypad.h> #undef NEW_BOARD_LEARNING_MODE
Tony Lindgren
maintainerPATCH 6/29 ARM: OMAP1: Move keypad.h from plat to mach
Quoted 1 line · Tony Lindgren
This is only used by omap1.
Turns out this one is already taken care of by Arnd's platform data patches, so I'll drop this one.
Regards,
Tony
Tony Lindgren
maintainerPATCH 7/29 ARM: OMAP1: Move lcd_mipid.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-nokia770.c | 2 +-
arch/arm/mach-omap1/include/mach/lcd_mipid.h | 0
drivers/video/omap/lcd_mipid.c | 2 +-
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/{plat-omap/include/plat/lcd_mipid.h => mach-omap1/include/mach/lcd_mipid.h} (100%)arch/arm/mach-omap1/board-nokia770.c +1 -1
@@ -27,7 +27,7 @@#include <mach/mux.h> #include <mach/keypad.h> -#include <plat/lcd_mipid.h> +#include <mach/lcd_mipid.h> #include <plat/mmc.h> #include <plat/clock.h>
arch/arm/mach-omap1/include/mach/lcd_mipid.h renamed from arch/arm/plat-omap/include/plat/lcd_mipid.h +0 -0
drivers/video/omap/lcd_mipid.c +1 -1
@@ -25,7 +25,7 @@#include <linux/spi/spi.h> #include <linux/module.h> -#include <plat/lcd_mipid.h> +#include <mach/lcd_mipid.h> #include "omapfb.h"
Tony Lindgren
maintainerPATCH 7/29 ARM: OMAP1: Move lcd_mipid.h from plat to mach
Quoted 1 line · Tony Lindgren
This is only used by omap1.
This too is handled by Arnd's series already, dropping this one.
Regards,
Tony
Tony Lindgren
maintainerPATCH 8/29 ARM: OMAP2+: Make board-zoom.h local
In reply to Tony LindgrenThis can be local to mach-omap2 after we rip out the messed up extmute stuff from board-zoom-peripherals.c that's all over the place and probably does not even work because of all the hardcoded GPIO numbers.
I also suggest ASoC gusy remove all extmute handling from sound/soc/codecs/twl4030.c unless it's been tested to work and implemented in a saner way.
---
arch/arm/mach-omap2/board-3630sdp.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +-
arch/arm/mach-omap2/board-zoom-display.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 16 +---------------
arch/arm/mach-omap2/board-zoom.c | 2 +-
arch/arm/mach-omap2/board-zoom.h | 0
sound/soc/omap/zoom2.c | 2 +-
8 files changed, 7 insertions(+), 21 deletions(-)
rename arch/arm/mach-omap2/{include/mach/board-zoom.h => board-zoom.h} (100%)arch/arm/mach-omap2/board-3630sdp.c +1 -1
@@ -20,7 +20,7 @@#include <plat/gpmc-smc91x.h> #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h"
arch/arm/mach-omap2/board-ldp.c +1 -1
@@ -36,7 +36,7 @@#include <plat/mcspi.h> #include "common.h" #include <plat/gpmc.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include <plat/usb.h> #include <plat/gpmc-smsc911x.h>
arch/arm/mach-omap2/board-zoom-debugboard.c +1 -1
@@ -20,7 +20,7 @@#include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "soc.h" #include "common.h"
arch/arm/mach-omap2/board-zoom-display.c +1 -1
@@ -16,7 +16,7 @@#include <linux/spi/spi.h> #include <plat/mcspi.h> #include <video/omapdss.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "common.h"
arch/arm/mach-omap2/board-zoom-peripherals.c +1 -15
@@ -28,7 +28,7 @@#include "common.h" #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "mux.h" #include "hsmmc.h"
@@ -245,12 +245,6 @@ static int zoom_twl_gpio_setup(struct device *dev,return ret; } -/* EXTMUTE callback function */ -static void zoom2_set_hs_extmute (int mute) -{ -gpio_set_value (ZOOM2_HEADSET_EXTMUTE_GPIO , mute); -} -static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, };
@@ -271,14 +265,6 @@ static int __init omap_i2c_init(void)TWL_COMMON_PDATA_MADC |TWL_COMMON_PDATA_AUDIO , TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); -if (machine_is_omap_zoom2 ()) { -struct twl4030_codec_data *codec_data; - codec_data = zoom_twldata.audio->codec; - - codec_data->ramp_delay_value =3 ;/* 161 ms */ - codec_data->hs_extmute =1 ; - codec_data->set_hs_extmute = zoom2_set_hs_extmute; - }omap_pmic_init (1 ,2400 ,"twl5030" ,7 +OMAP_INTC_START , &zoom_twldata);omap_register_i2c_bus (2 ,400 ,NULL ,0 );omap_register_i2c_bus (3 ,400 ,NULL ,0 );
arch/arm/mach-omap2/board-zoom.c +1 -1
@@ -24,7 +24,7 @@#include "common.h" #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h"
arch/arm/mach-omap2/board-zoom.h renamed from arch/arm/mach-omap2/include/mach/board-zoom.h +0 -0
sound/soc/omap/zoom2.c +1 -1
@@ -28,7 +28,6 @@#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/gpio.h> -#include <mach/board-zoom.h> #include <plat/mcbsp.h> /* Register descriptions for twl4030 codec part */
@@ -39,6 +38,7 @@#include "omap-pcm.h" #define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15) +#define ZOOM2_HEADSET_EXTMUTE_GPIO 153static int zoom2_hw_params (struct snd_pcm_substream *substream,struct snd_pcm_hw_params *params)
Re: [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local
Quoted 8 lines · Tony Lindgren
This can be local to mach-omap2 after we rip out the messed up extmute stuff from
board-zoom-peripherals.cthat's all over the place and probably does not even work because of all the hardcoded GPIO numbers.I also suggest ASoC gusy remove all extmute handling from
sound/soc/codecs/twl4030.cunless it's been tested to work and implemented in a saner way.
or I can apply it if that's easier.
Re: [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local
In reply to Tony LindgrenHi Tony,
Quoted 8 lines · Tony Lindgren
This can be local to mach-omap2 after we rip out the messed up extmute stuff from
board-zoom-peripherals.cthat's all over the place and probably does not even work because of all the hardcoded GPIO numbers.I also suggest ASoC gusy remove all extmute handling from
sound/soc/codecs/twl4030.cunless it's been tested to work and implemented in a saner way.
I just wanted to note that I also have pending patch for zoom2.c as part of the twl4030 audio module DT support series:
http://lkml.indiana.edu/hypermail/linux/kernel/1209.1/00711.html
Quoted 150 lines
Cc Peter Ujfalusi <[email protected]>Cc Jarkko Nikula <[email protected]>Cc Liam Girdwood <[email protected]>Cc Mark Brown <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- arch/arm/mach-omap2/board-3630sdp.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- arch/arm/mach-omap2/board-zoom-display.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 16 +--------------- arch/arm/mach-omap2/board-zoom.c | 2 +- arch/arm/mach-omap2/board-zoom.h | 0 sound/soc/omap/zoom2.c | 2 +- 8 files changed, 7 insertions(+), 21 deletions(-) rename arch/arm/mach-omap2/{include/mach/board-zoom.h => board-zoom.h} (100%)arch/arm/mach-omap2/board-3630sdp.c +1
-1@@ -20,7 +20,7 @@#include <plat/gpmc-smc91x.h> #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" arch/arm/mach-omap2/board-ldp.c +1
-1@@ -36,7 +36,7 @@#include <plat/mcspi.h> #include "common.h" #include <plat/gpmc.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include <plat/usb.h> #include <plat/gpmc-smsc911x.h> arch/arm/mach-omap2/board-zoom-debugboard.c +1
-1@@ -20,7 +20,7 @@#include <plat/gpmc.h> #include <plat/gpmc-smsc911x.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" arch/arm/mach-omap2/board-zoom-display.c +1
-1@@ -16,7 +16,7 @@#include <linux/spi/spi.h> #include <plat/mcspi.h> #include <video/omapdss.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "common.h" arch/arm/mach-omap2/board-zoom-peripherals.c +1
-15@@ -28,7 +28,7 @@#include "common.h" #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "mux.h" #include "hsmmc.h" @@ -245,12 +245,6 @@ static int zoom_twl_gpio_setup(struct device *dev,return ret; } -/* EXTMUTE callback function */ -static void zoom2_set_hs_extmute (int mute) -{ -gpio_set_value (ZOOM2_HEADSET_EXTMUTE_GPIO , mute); -} -static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, };@@ -271,14 +265,6 @@ static int __init omap_i2c_init(void)TWL_COMMON_PDATA_MADC |TWL_COMMON_PDATA_AUDIO , TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); -if (machine_is_omap_zoom2 ()) { -struct twl4030_codec_data *codec_data; - codec_data = zoom_twldata.audio->codec; - - codec_data->ramp_delay_value =3 ;/* 161 ms */ - codec_data->hs_extmute =1 ; - codec_data->set_hs_extmute = zoom2_set_hs_extmute; - }omap_pmic_init (1 ,2400 ,"twl5030" ,7 +OMAP_INTC_START , &zoom_twldata);omap_register_i2c_bus (2 ,400 ,NULL ,0 );omap_register_i2c_bus (3 ,400 ,NULL ,0 );arch/arm/mach-omap2/board-zoom.c +1
-1@@ -24,7 +24,7 @@#include "common.h" #include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" arch/arm/mach-omap2/board-zoom.h renamed from arch/arm/mach-omap2/include/mach/board-zoom.h +0
-0sound/soc/omap/zoom2.c +1
-1@@ -28,7 +28,6 @@#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/gpio.h> -#include <mach/board-zoom.h> #include <plat/mcbsp.h> /* Register descriptions for twl4030 codec part */ @@ -39,6 +38,7 @@#include "omap-pcm.h" #define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15) +#define ZOOM2_HEADSET_EXTMUTE_GPIO 153static int zoom2_hw_params (struct snd_pcm_substream *substream,struct snd_pcm_hw_params *params)
Signature · 5 lines
Péter _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Tony Lindgren
maintainerRe: [PATCH 08/29] ARM: OMAP2+: Make board-zoom.h local
Quoted 9 lines · Peter Ujfalusi
Hi Tony,
Quoted 5 lines · Tony Lindgren
This can be local to mach-omap2 after we rip out the messed up extmute stuff from
board-zoom-peripherals.cthat's all over the place and probably does not even work because of all the hardcoded GPIO numbers.
Quoted 7 lines
Quoted 3 lines
I also suggest ASoC gusy remove all extmute handling from
sound/soc/codecs/twl4030.cunless it's been tested to work and implemented in a saner way.I just wanted to note that I also have pending patch for
zoom2.cas part of the twl4030 audio module DT support series:
http://lkml.indiana.edu/hypermail/linux/kernel/1209.1/00711.html
Oh great, that makes it quite a bit saner. I'll drop this for now as after your patch I can just move it.
Regards,
Tony
Tony Lindgren
maintainerPATCH 9/29 ARM: OMAP2+: Make am35xx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/am35xx-emac.c | 2 +-
arch/arm/mach-omap2/am35xx.h | 0
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-omap2/board-cm-t3517.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/usb-musb.c | 2 +-
6 files changed, 5 insertions(+), 5 deletions(-)
rename arch/arm/mach-omap2/{include/mach/am35xx.h => am35xx.h} (100%)arch/arm/mach-omap2/am35xx-emac.c +1 -1
@@ -19,7 +19,7 @@#include <linux/davinci_emac.h> #include <asm/system.h> #include <plat/omap_device.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "control.h" #include "am35xx-emac.h"
arch/arm/mach-omap2/am35xx.h renamed from arch/arm/mach-omap2/include/mach/am35xx.h +0 -0
arch/arm/mach-omap2/board-am3517evm.c +1 -1
@@ -27,7 +27,7 @@#include <linux/mmc/host.h> #include <linux/platform_data/gpio-omap.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h>
arch/arm/mach-omap2/board-cm-t3517.c +1 -1
@@ -43,7 +43,7 @@#include <plat/nand.h> #include <plat/gpmc.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "mux.h" #include "control.h"
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +1 -1
@@ -28,7 +28,7 @@#include <plat/mcspi.h> #include <plat/dmtimer.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "soc.h" #include "omap_hwmod_common_data.h"
arch/arm/mach-omap2/usb-musb.c +1 -1
@@ -28,7 +28,7 @@#include <plat/usb.h> #include <plat/omap_device.h> -#include <mach/am35xx.h> +#include "am35xx.h" #include "mux.h"
Tony Lindgren
maintainerPATCH 10/29 ARM: OMAP2+: Make board-rx51.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-rx51-video.c | 2 +-
arch/arm/mach-omap2/board-rx51.h | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/mach-omap2/{include/mach/board-rx51.h => board-rx51.h} (100%)arch/arm/mach-omap2/board-rx51-peripherals.c +1 -1
@@ -35,7 +35,7 @@#include <plat/gpmc-smc91x.h> #include <plat/omap-pm.h> -#include <mach/board-rx51.h> +#include "board-rx51.h" #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h>
arch/arm/mach-omap2/board-rx51-video.c +1 -1
@@ -19,7 +19,7 @@#include <plat/vram.h> #include <plat/mcspi.h> -#include <mach/board-rx51.h> +#include "board-rx51.h" #include "mux.h"
arch/arm/mach-omap2/board-rx51.h renamed from arch/arm/mach-omap2/include/mach/board-rx51.h +0 -0
Tony Lindgren
maintainerPATCH 11/29 ARM: OMAP2+: Make ctrl_module_core_44xx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/control.h | 2 +-
arch/arm/mach-omap2/ctrl_module_core_44xx.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_core_44xx.h => ctrl_module_core_44xx.h} (100%)arch/arm/mach-omap2/control.h +1 -1
@@ -16,7 +16,7 @@#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H#define __ARCH_ARM_MACH_OMAP2_CONTROL_H -#include <mach/ctrl_module_core_44xx.h> +#include "ctrl_module_core_44xx.h" #include <mach/ctrl_module_wkup_44xx.h> #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h>
arch/arm/mach-omap2/ctrl_module_core_44xx.h renamed from arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +0 -0
Tony Lindgren
maintainerPATCH 12/29 ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/control.h | 2 +-
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_pad_core_44xx.h => ctrl_module_pad_core_44xx.h} (100%)arch/arm/mach-omap2/control.h +1 -1
@@ -18,7 +18,7 @@#include "ctrl_module_core_44xx.h" #include <mach/ctrl_module_wkup_44xx.h> -#include <mach/ctrl_module_pad_core_44xx.h> +#include "ctrl_module_pad_core_44xx.h" #include <mach/ctrl_module_pad_wkup_44xx.h> #include "am33xx.h"
arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h renamed from arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +0 -0
Tony Lindgren
maintainerPATCH 13/29 ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/control.h | 2 +-
arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_pad_wkup_44xx.h => ctrl_module_pad_wkup_44xx.h} (100%)arch/arm/mach-omap2/control.h +1 -1
@@ -19,7 +19,7 @@#include "ctrl_module_core_44xx.h" #include <mach/ctrl_module_wkup_44xx.h> #include "ctrl_module_pad_core_44xx.h" -#include <mach/ctrl_module_pad_wkup_44xx.h> +#include "ctrl_module_pad_wkup_44xx.h" #include "am33xx.h"
arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h renamed from arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h +0 -0
Tony Lindgren
maintainerPATCH 14/29 ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/control.h | 2 +-
arch/arm/mach-omap2/ctrl_module_wkup_44xx.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/mach-omap2/{include/mach/ctrl_module_wkup_44xx.h => ctrl_module_wkup_44xx.h} (100%)arch/arm/mach-omap2/control.h +1 -1
@@ -17,7 +17,7 @@#define __ARCH_ARM_MACH_OMAP2_CONTROL_H#include "ctrl_module_core_44xx.h" -#include <mach/ctrl_module_wkup_44xx.h> +#include "ctrl_module_wkup_44xx.h" #include "ctrl_module_pad_core_44xx.h" #include "ctrl_module_pad_wkup_44xx.h"
arch/arm/mach-omap2/ctrl_module_wkup_44xx.h renamed from arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h +0 -0
Tony Lindgren
maintainerPATCH 15/29 ARM: OMAP2+: Make omap-secure.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/omap-secure.c | 2 +-
arch/arm/mach-omap2/omap-secure.h | 0
arch/arm/mach-omap2/omap-smp.c | 2 +-
arch/arm/mach-omap2/omap-wakeupgen.c | 2 +-
arch/arm/mach-omap2/sleep44xx.S | 2 +-
5 files changed, 4 insertions(+), 4 deletions(-)
rename arch/arm/mach-omap2/{include/mach/omap-secure.h => omap-secure.h} (100%)arch/arm/mach-omap2/omap-secure.c +1 -1
@@ -19,7 +19,7 @@#include <asm/memblock.h> #include <plat/omap-secure.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" static phys_addr_t omap_secure_memblock_base;
arch/arm/mach-omap2/omap-secure.h renamed from arch/arm/mach-omap2/include/mach/omap-secure.h +0 -0
arch/arm/mach-omap2/omap-smp.c +1 -1
@@ -24,7 +24,7 @@#include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" #include <mach/omap-wakeupgen.h> #include <asm/cputype.h>
arch/arm/mach-omap2/omap-wakeupgen.c +1 -1
@@ -28,7 +28,7 @@#include <asm/hardware/gic.h> #include <mach/omap-wakeupgen.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" #include "soc.h" #include "omap4-sar-layout.h"
arch/arm/mach-omap2/sleep44xx.S +1 -1
@@ -14,7 +14,7 @@ #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/omap-secure.h> +#include "omap-secure.h" #include "common.h" #include "omap44xx.h"
Tony Lindgren
maintainerPATCH 16/29 ARM: OMAP2+: Make omap-wakeupgen.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/omap-hotplug.c | 2 +-
arch/arm/mach-omap2/omap-smp.c | 2 +-
arch/arm/mach-omap2/omap-wakeupgen.c | 2 +-
arch/arm/mach-omap2/omap-wakeupgen.h | 0
arch/arm/mach-omap2/omap4-common.c | 2 +-
5 files changed, 4 insertions(+), 4 deletions(-)
rename arch/arm/mach-omap2/{include/mach/omap-wakeupgen.h => omap-wakeupgen.h} (100%)arch/arm/mach-omap2/omap-hotplug.c +1 -1
@@ -20,7 +20,7 @@#include <linux/io.h> #include <asm/cacheflush.h> -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" #include "common.h"
arch/arm/mach-omap2/omap-smp.c +1 -1
@@ -25,7 +25,7 @@#include <asm/smp_scu.h> #include "omap-secure.h" -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" #include <asm/cputype.h> #include "soc.h"
arch/arm/mach-omap2/omap-wakeupgen.c +1 -1
@@ -27,7 +27,7 @@#include <asm/hardware/gic.h> -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" #include "omap-secure.h" #include "soc.h"
arch/arm/mach-omap2/omap-wakeupgen.h renamed from arch/arm/mach-omap2/include/mach/omap-wakeupgen.h +0 -0
arch/arm/mach-omap2/omap4-common.c +1 -1
@@ -29,7 +29,7 @@#include <plat/omap-secure.h> #include <plat/mmc.h> -#include <mach/omap-wakeupgen.h> +#include "omap-wakeupgen.h" #include "soc.h" #include "common.h"
Tony Lindgren
maintainerPATCH 17/29 ARM: OMAP1: Move board-sx1.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-sx1-mmc.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/include/mach/board-sx1.h | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/{plat-omap/include/plat/board-sx1.h => mach-omap1/include/mach/board-sx1.h} (100%)arch/arm/mach-omap1/board-sx1-mmc.c +1 -1
@@ -17,7 +17,7 @@#include <mach/hardware.h> #include <plat/mmc.h> -#include <plat/board-sx1.h> +#include <mach/board-sx1.h> #if defined(CONFIG_MMC_OMAP ) || defined(CONFIG_MMC_OMAP_MODULE )
arch/arm/mach-omap1/board-sx1.c +1 -1
@@ -39,7 +39,7 @@#include <plat/irda.h> #include <plat/tc.h> #include <mach/keypad.h> -#include <plat/board-sx1.h> +#include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h>
arch/arm/mach-omap1/include/mach/board-sx1.h renamed from arch/arm/plat-omap/include/plat/board-sx1.h +0 -0
Tony Lindgren
maintainerPATCH 18/29 ARM: OMAP1: Move board-voiceblue.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap1/include/mach/board-voiceblue.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/{plat-omap/include/plat/board-voiceblue.h => mach-omap1/include/mach/board-voiceblue.h} (100%)arch/arm/mach-omap1/board-voiceblue.c +1 -1
@@ -31,7 +31,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/board-voiceblue.h> +#include <mach/board-voiceblue.h> #include <plat/flash.h> #include <mach/mux.h> #include <plat/tc.h>
arch/arm/mach-omap1/include/mach/board-voiceblue.h renamed from arch/arm/plat-omap/include/plat/board-voiceblue.h +0 -0
Tony Lindgren
maintainerPATCH 19/29 ARM: OMAP2+: Make debug-devices.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/debug-devices.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/{plat-omap/include/plat/debug-devices.h => mach-omap2/debug-devices.h} (100%)arch/arm/mach-omap2/board-h4.c +1 -1
@@ -34,7 +34,7 @@#include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> -#include <plat/debug-devices.h> +#include "debug-devices.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h>
arch/arm/mach-omap2/debug-devices.h renamed from arch/arm/plat-omap/include/plat/debug-devices.h +0 -0
Tony Lindgren
maintainerPATCH 20/29 ARM: OMAP1: Move flash.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-fsample.c | 2 +-
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-perseus2.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap1/flash.c | 2 +-
arch/arm/mach-omap1/include/mach/flash.h | 0
13 files changed, 12 insertions(+), 12 deletions(-)
rename arch/arm/{plat-omap/include/plat/flash.h => mach-omap1/include/mach/flash.h} (100%)arch/arm/mach-omap1/board-fsample.c +1 -1
@@ -29,7 +29,7 @@#include <plat/tc.h> #include <mach/mux.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <plat/fpga.h> #include <mach/keypad.h>
arch/arm/mach-omap1/board-h2.c +1 -1
@@ -43,7 +43,7 @@#include <plat/tc.h> #include <plat/irda.h> #include <mach/keypad.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/hardware.h> #include <mach/usb.h>
arch/arm/mach-omap1/board-h3.c +1 -1
@@ -44,7 +44,7 @@#include <plat/tc.h> #include <mach/keypad.h> #include <plat/dma.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/hardware.h> #include <mach/irqs.h>
arch/arm/mach-omap1/board-innovator.c +1 -1
@@ -32,7 +32,7 @@#include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <plat/fpga.h> #include <plat/tc.h> #include <mach/keypad.h>
arch/arm/mach-omap1/board-osk.c +1 -1
@@ -46,7 +46,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/tc.h>
arch/arm/mach-omap1/board-palmte.c +1 -1
@@ -34,7 +34,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h>
arch/arm/mach-omap1/board-palmtt.c +1 -1
@@ -34,7 +34,7 @@#include <asm/mach/map.h> #include <plat/led.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h>
arch/arm/mach-omap1/board-palmz71.c +1 -1
@@ -36,7 +36,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h>
arch/arm/mach-omap1/board-perseus2.c +1 -1
@@ -30,7 +30,7 @@#include <plat/tc.h> #include <mach/mux.h> #include <plat/fpga.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-sx1.c +1 -1
@@ -33,7 +33,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/dma.h> #include <plat/irda.h>
arch/arm/mach-omap1/board-voiceblue.c +1 -1
@@ -32,7 +32,7 @@#include <asm/mach/map.h> #include <mach/board-voiceblue.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/mux.h> #include <plat/tc.h>
arch/arm/mach-omap1/flash.c +1 -1
@@ -11,7 +11,7 @@#include <linux/mtd/map.h> #include <plat/tc.h> -#include <plat/flash.h> +#include <mach/flash.h> #include <mach/hardware.h>
arch/arm/mach-omap1/include/mach/flash.h renamed from arch/arm/plat-omap/include/plat/flash.h +0 -0
Tony Lindgren
maintainerPATCH 21/29 ARM: OMAP2+: Make gpmc-smc91x.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +-
arch/arm/mach-omap2/board-3630sdp.c | 2 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/gpmc-smc91x.c | 2 +-
arch/arm/mach-omap2/gpmc-smc91x.h | 0
6 files changed, 5 insertions(+), 5 deletions(-)
rename arch/arm/{plat-omap/include/plat/gpmc-smc91x.h => mach-omap2/gpmc-smc91x.h} (100%)arch/arm/mach-omap2/board-2430sdp.c +1 -1
@@ -36,7 +36,7 @@#include "common.h" #include <plat/gpmc.h> #include <plat/usb.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h>
arch/arm/mach-omap2/board-3430sdp.c +1 -1
@@ -37,7 +37,7 @@#include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include "board-flash.h" #include "mux.h"
arch/arm/mach-omap2/board-3630sdp.c +1 -1
@@ -17,7 +17,7 @@#include <asm/mach/arch.h> #include "common.h" -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include <plat/usb.h> #include "board-zoom.h"
arch/arm/mach-omap2/board-rx51-peripherals.c +1 -1
@@ -32,7 +32,7 @@#include <plat/dma.h> #include <plat/gpmc.h> #include <plat/onenand.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include <plat/omap-pm.h> #include "board-rx51.h"
arch/arm/mach-omap2/gpmc-smc91x.c +1 -1
@@ -18,7 +18,7 @@#include <linux/smc91x.h> #include <plat/gpmc.h> -#include <plat/gpmc-smc91x.h> +#include "gpmc-smc91x.h" #include "soc.h"
arch/arm/mach-omap2/gpmc-smc91x.h renamed from arch/arm/plat-omap/include/plat/gpmc-smc91x.h +0 -0
Tony Lindgren
maintainerPATCH 22/29 ARM: OMAP2+: Make gpmc-smsc911x.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-omap3logic.c | 2 +-
arch/arm/mach-omap2/board-omap3stalker.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 2 +-
arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +-
arch/arm/mach-omap2/gpmc-smsc911x.c | 2 +-
arch/arm/mach-omap2/gpmc-smsc911x.h | 0
10 files changed, 9 insertions(+), 9 deletions(-)
rename arch/arm/{plat-omap/include/plat/gpmc-smsc911x.h => mach-omap2/gpmc-smsc911x.h} (100%)arch/arm/mach-omap2/board-cm-t35.c +1 -1
@@ -64,7 +64,7 @@#if defined(CONFIG_SMSC911X ) || defined(CONFIG_SMSC911X_MODULE )#include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0,
arch/arm/mach-omap2/board-igep0020.c +1 -1
@@ -192,7 +192,7 @@ static void __init igep_flash_init(void) {}#if defined(CONFIG_SMSC911X ) || defined(CONFIG_SMSC911X_MODULE )#include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .cs = IGEP2_SMSC911X_CS,
arch/arm/mach-omap2/board-ldp.c +1 -1
@@ -38,7 +38,7 @@#include <plat/gpmc.h> #include "board-zoom.h" #include <plat/usb.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h>
arch/arm/mach-omap2/board-omap3evm.c +1 -1
@@ -119,7 +119,7 @@ static void __init omap3_evm_get_revision(void) }#if defined(CONFIG_SMSC911X ) || defined(CONFIG_SMSC911X_MODULE ) -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .cs = OMAP3EVM_SMSC911X_CS,
arch/arm/mach-omap2/board-omap3logic.c +1 -1
@@ -34,7 +34,7 @@#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #include <plat/gpmc.h> #include <plat/sdrc.h> #include <plat/usb.h>
arch/arm/mach-omap2/board-omap3stalker.c +1 -1
@@ -60,7 +60,7 @@#include "common-board-devices.h" #if defined(CONFIG_SMSC911X ) || defined(CONFIG_SMSC911X_MODULE ) -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #define OMAP3STALKER_ETHR_START 0x2c000000#define OMAP3STALKER_ETHR_SIZE 1024
arch/arm/mach-omap2/board-overo.c +1 -1
@@ -113,7 +113,7 @@ static inline void __init overo_ads7846_init(void) { return; }#if defined(CONFIG_SMSC911X ) || defined(CONFIG_SMSC911X_MODULE )#include <linux/smsc911x.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0,
arch/arm/mach-omap2/board-zoom-debugboard.c +1 -1
@@ -18,7 +18,7 @@#include <linux/regulator/machine.h> #include <plat/gpmc.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" #include "board-zoom.h"
arch/arm/mach-omap2/gpmc-smsc911x.c +1 -1
@@ -21,7 +21,7 @@#include <linux/smsc911x.h> #include <plat/gpmc.h> -#include <plat/gpmc-smsc911x.h> +#include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { [0 ] = {
arch/arm/mach-omap2/gpmc-smsc911x.h renamed from arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +0 -0
Tony Lindgren
maintainerPATCH 23/29 ARM: OMAP2+: Make hdq1w.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/hdq1w.c | 2 +-
arch/arm/mach-omap2/hdq1w.h | 0
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 2 +-
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/{plat-omap/include/plat/hdq1w.h => mach-omap2/hdq1w.h} (100%)arch/arm/mach-omap2/hdq1w.c +1 -1
@@ -29,7 +29,7 @@#include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/hdq1w.h> +#include "hdq1w.h" #include "common.h"
arch/arm/mach-omap2/hdq1w.h renamed from arch/arm/plat-omap/include/plat/hdq1w.h +0 -0
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +1 -1
@@ -13,7 +13,7 @@#include <plat/serial.h> #include <plat/dma.h> #include <plat/common.h> -#include <plat/hdq1w.h> +#include "hdq1w.h" #include "omap_hwmod_common_data.h"
Tony Lindgren
maintainerPATCH 24/29 ARM: OMAP1: Move irda.h from plat to mach
In reply to Tony LindgrenThis is only used by omap1.
---
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-sx1.c | 2 +-
arch/arm/mach-omap1/include/mach/irda.h | 0
6 files changed, 5 insertions(+), 5 deletions(-)
rename arch/arm/{plat-omap/include/plat/irda.h => mach-omap1/include/mach/irda.h} (100%)arch/arm/mach-omap1/board-h2.c +1 -1
@@ -41,7 +41,7 @@#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <mach/keypad.h> #include <mach/flash.h>
arch/arm/mach-omap1/board-palmte.c +1 -1
@@ -38,7 +38,7 @@#include <mach/mux.h> #include <plat/tc.h> #include <plat/dma.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-palmtt.c +1 -1
@@ -38,7 +38,7 @@#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-palmz71.c +1 -1
@@ -40,7 +40,7 @@#include <mach/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <mach/keypad.h> #include <mach/hardware.h>
arch/arm/mach-omap1/board-sx1.c +1 -1
@@ -36,7 +36,7 @@#include <mach/flash.h> #include <mach/mux.h> #include <plat/dma.h> -#include <plat/irda.h> +#include <mach/irda.h> #include <plat/tc.h> #include <mach/keypad.h> #include <mach/board-sx1.h>
arch/arm/mach-omap1/include/mach/irda.h renamed from arch/arm/plat-omap/include/plat/irda.h +0 -0
Tony Lindgren
maintainerPATCH 25/29 ARM: OMAP2+: Make l3_2xxx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/l3_2xxx.h | 0
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 2 +-
4 files changed, 3 insertions(+), 3 deletions(-)
rename arch/arm/{plat-omap/include/plat/l3_2xxx.h => mach-omap2/l3_2xxx.h} (100%)arch/arm/mach-omap2/l3_2xxx.h renamed from arch/arm/plat-omap/include/plat/l3_2xxx.h +0 -0
arch/arm/mach-omap2/omap_hwmod_2420_data.c +1 -1
@@ -18,7 +18,7 @@#include <plat/i2c.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> -#include <plat/l3_2xxx.h> +#include "l3_2xxx.h" #include <plat/l4_2xxx.h> #include <plat/mmc.h>
arch/arm/mach-omap2/omap_hwmod_2430_data.c +1 -1
@@ -20,7 +20,7 @@#include <plat/mcspi.h> #include <plat/dmtimer.h> #include <plat/mmc.h> -#include <plat/l3_2xxx.h> +#include "l3_2xxx.h" #include "soc.h" #include "omap_hwmod_common_data.h"
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +1 -1
@@ -15,7 +15,7 @@#include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/l3_2xxx.h> +#include "l3_2xxx.h" #include <plat/l4_2xxx.h> #include "omap_hwmod_common_data.h"
Tony Lindgren
maintainerPATCH 26/29 ARM: OMAP2+: Make l3_3xxx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/l3_3xxx.h | 0
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/{plat-omap/include/plat/l3_3xxx.h => mach-omap2/l3_3xxx.h} (100%)arch/arm/mach-omap2/l3_3xxx.h renamed from arch/arm/plat-omap/include/plat/l3_3xxx.h +0 -0
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +1 -1
@@ -20,7 +20,7 @@#include <plat/omap_hwmod.h> #include <plat/dma.h> #include <plat/serial.h> -#include <plat/l3_3xxx.h> +#include "l3_3xxx.h" #include <plat/l4_3xxx.h> #include <plat/i2c.h> #include <plat/mmc.h>
Tony Lindgren
maintainerPATCH 27/29 ARM: OMAP2+: Make l4_2xxx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/l4_2xxx.h | 0
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 2 +-
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/{plat-omap/include/plat/l4_2xxx.h => mach-omap2/l4_2xxx.h} (100%)arch/arm/mach-omap2/l4_2xxx.h renamed from arch/arm/plat-omap/include/plat/l4_2xxx.h +0 -0
arch/arm/mach-omap2/omap_hwmod_2420_data.c +1 -1
@@ -19,7 +19,7 @@#include <plat/mcspi.h> #include <plat/dmtimer.h> #include "l3_2xxx.h" -#include <plat/l4_2xxx.h> +#include "l4_2xxx.h" #include <plat/mmc.h> #include "omap_hwmod_common_data.h"
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +1 -1
@@ -16,7 +16,7 @@#include <plat/omap_hwmod.h> #include <plat/serial.h> #include "l3_2xxx.h" -#include <plat/l4_2xxx.h> +#include "l4_2xxx.h" #include "omap_hwmod_common_data.h"
Tony Lindgren
maintainerPATCH 28/29 ARM: OMAP2+: Make l4_3xxx.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/l4_3xxx.h | 0
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/{plat-omap/include/plat/l4_3xxx.h => mach-omap2/l4_3xxx.h} (100%)arch/arm/mach-omap2/l4_3xxx.h renamed from arch/arm/plat-omap/include/plat/l4_3xxx.h +0 -0
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +1 -1
@@ -21,7 +21,7 @@#include <plat/dma.h> #include <plat/serial.h> #include "l3_3xxx.h" -#include <plat/l4_3xxx.h> +#include "l4_3xxx.h" #include <plat/i2c.h> #include <plat/mmc.h> #include <plat/mcbsp.h>
Tony Lindgren
maintainerPATCH 29/29 ARM: OMAP2+: Make omap4-keypad.h local
In reply to Tony LindgrenThis can be local to mach-omap2.
---
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/devices.c | 2 +-
arch/arm/mach-omap2/omap4-keypad.h | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/{plat-omap/include/plat/omap4-keypad.h => mach-omap2/omap4-keypad.h} (100%)arch/arm/mach-omap2/board-4430sdp.c +1 -1
@@ -36,7 +36,7 @@#include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <plat/omap4-keypad.h> +#include "omap4-keypad.h" #include <video/omapdss.h> #include <video/omap-panel-nokia-dsi.h> #include <video/omap-panel-picodlp.h>
arch/arm/mach-omap2/devices.c +1 -1
@@ -27,7 +27,7 @@#include <plat/dma.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/omap4-keypad.h> +#include "omap4-keypad.h" #include "soc.h" #include "common.h"