Skip to contentSkip to conversation

setup_dig_out_stream() resets the SPDIF steam causing clicks

PATCH Laurence Darby 1 participant 1 message Sep 28, 2012 Sound

lore
Share & tools
lore
#0 lore raw

Hi,

I'm playing audio via SPDIF, with a Realtek codec, and there's a problem that whenever audio is started, or seeking in every music player I tried, the DAC lost sync briefly, which made it 'click' when it muted and unmuted itself.

I recently upgraded the DAC, and this problem only happened with the new DAC, but not the old one, I don't know (or really care) why - the old DAC had much worse problems.

Here's what I did to fix this:

sound/pci/hda/hda_codec.c 2012-09-28 00:39:31.000000000 +0100 renamed from sound/pci/hda/hda_codec.c.orig 2012-09-28 00:13:25.000000000 +0100 +3 -1
diff -up linux-3.5.4/sound/pci/hda/hda_codec.c.orig linux-3.5.4/sound/pci/hda/hda_codec.c
@@ -4693,9 +4693,11 @@ static void setup_dig_out_stream(struct
                                                   format);
        }
        /* turn on again (if needed) */
-       if (codec->spdif_status_reset && (spdif->ctls & AC_DIG1_ENABLE))
+       if (codec->spdif_status_reset && (spdif->ctls & AC_DIG1_ENABLE)) {
                set_dig_out_convert(codec, nid,
                                    spdif->ctls & 0xff, -1);
+               codec->spdif_status_reset=0;
+       }
 }
 
 static void cleanup_dig_out_stream(struct hda_codec *codec, hda_nid_t nid)

That makes SPDIF turn off and on just once when sound is first played (i.e. it clicks once then, then no more). In patch_realtek.c it's got this:

	/* FIXME: do we need this for all Realtek codec models? */ 
	codec->spdif_status_reset = 1;

If I set that to 0, then the left channel doesn't initialize and is silent, so the reset really does need to happen once (for my realtek model anyway, I don't know how to find out what that would be?)

So, is the above an acceptable fix?

Regards,
Laurence