TQM8xx: adjust linker script to grown code size
PATCH 1/1 TQM8xx: adjust linker script to grown code size
Some of the previous changes caused the code to grow, which causes errors like
u-boot.lds:76 cannot move location counter backwards (from 4000828c to 40008000)
when building with some older tool chains (like ELDK 4.2). Adjust the linker script to make fit again.
--- board/tqc/tqm8xx/u-boot.lds | 2 -- 1 file changed, 2 deletions(-)
This fixes the autobuilder errors for TQM855L, TQM860L and TQM862L.
board/tqc/tqm8xx/u-boot.lds +0 -2
@@ -43,8 +43,6 @@ SECTIONS drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable) drivers/rtc/librtc.o (.text*) drivers/misc/libmisc.o (.text*) - *(.text.print_buffer) - *(.text.print_size) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.ppcenv*)
Signature · 1 line
1.7.11.4
PATCH 1/1 TQM8xx: adjust linker script to grown code size
Dear Wolfgang Denk,
Quoted 8 lines
Some of the previous changes caused the code to grow, which causes errors like
u-boot.lds:76 cannot move location counter backwards (from
4000828cto 40008000)when building with some older tool chains (like ELDK 4.2). Adjust the linker script to make fit again.
[...]
I ain't no expert, but didn't this happen on TQM85xx ?
Best regards,
Marek Vasut
PATCH 1/1 TQM8xx: adjust linker script to grown code size
Dear Marek Vasut,
Quoted 5 lines · In message <[email protected]> you wrote:
Dear Wolfgang Denk,
Quoted 3 lines
Some of the previous changes caused the code to grow, which causes errors like
Quoted 8 lines
Quoted 5 lines
u-boot.lds:76 cannot move location counter backwards (from
4000828cto 40008000)when building with some older tool chains (like ELDK 4.2). Adjust the linker script to make fit again.
[...]
I ain't no expert, but didn't this happen on TQM85xx ?
No.
TQM85xx is a different issue (here the image size has grown, which would require to change the whole memory map). I'll rather remove these boards.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de PROGRAM - n. A magic spell cast over a computer allowing it to turn one's input into error messages. v. tr. - To engage in a pastime similar to banging one's head against a wall, but with fewer opportunities for reward.
PATCH 1/1 TQM8xx: adjust linker script to grown code size
Dear Wolfgang Denk,
Quoted 16 lines
Dear Marek Vasut,
Quoted 13 lines · In message <[email protected]> you wrote:
Dear Wolfgang Denk,
Quoted 8 lines
Some of the previous changes caused the code to grow, which causes errors like
u-boot.lds:76 cannot move location counter backwards (from
4000828cto 40008000)when building with some older tool chains (like ELDK 4.2). Adjust the linker script to make fit again.
[...]
Quoted 7 lines
Quoted 1 line
I ain't no expert, but didn't this happen on TQM85xx ?
No.
TQM85xx is a different issue (here the image size has grown, which would require to change the whole memory map). I'll rather remove these boards.
But these are important powerpc boards, no ?
Quoted 3 lines
Best regards,
Wolfgang Denk
Best regards,
Marek Vasut
Quoted 9 lines · Wolfgang Denk
Some of the previous changes caused the code to grow, which causes errors like
u-boot.lds:76 cannot move location counter backwards (from
4000828cto 40008000)when building with some older tool chains (like ELDK 4.2). Adjust the linker script to make fit again.
Signed-off-by Wolfgang Denk <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121002/06cfb966/attachment.pgp>