Skip to contentSkip to conversation

Complex hw buffer with MMAP_COMPLEX?

DISCUSSION Adrian Knoth 3 participants 4 messages Oct 9, 2012

lore
Share & tools
lore
#0 lore raw

Hi!

I'm about to start working on the driver for the new RME MADI FX card with its 194 input and 196 output channels.

I've noticed that the device has a rather uncommon hw buffer layout. Let's stick to the input side for the sake of simplicity:

2ch AES, interleaved
8ch MADI 001-008, interleaved
8ch MADI 009-015, interleaved
[..]
8ch MADI 184-192, interleaved

On the output side, there is another stereo pair for headphones.

That is, we're dealing with 25 (or 26 for output) interleaved streams with two or eight channels each.

How could we represent such a layout in ALSA, that is, how are we talking to userspace? Would one create subdevices and rejoin them via plughw? Or use MMAP_COMPLEX and then let every application deal with it on its own? It's certainly not a problem to special-case the MADI FX in jackd1 and jackd2, but OTOH, this would require other ALSA apps to do the same (I'm thinking of proprietary custom code).

I wonder if we could afford to rearrange the buffers in the driver and expose a single non-interleaved buffer to userspace.

WDYT?

TIA

#1 lore raw
Quoted 6 lines · Adrian Knoth

That is, we're dealing with 25 (or 26 for output) interleaved streams with two or eight channels each.

How could we represent such a layout in ALSA, that is, how are we talking to userspace? Would one create subdevices and rejoin them via plughw?

Is it possible to start/stop the streams independently? If yes, this might be useful.

(And subdevices are usually used for streams that are mixed together.)

Quoted 2 lines

Or use MMAP_COMPLEX and then let every application deal with it on its own?

Alsa-lib can automatically convert this. Applications that insist on using hw devices have to deal with it (Jack does).

Regards,
Clemens

#2 lore raw
Quoted 8 lines · Clemens Ladisch
Quoted 6 lines

That is, we're dealing with 25 (or 26 for output) interleaved streams with two or eight channels each.

How could we represent such a layout in ALSA, that is, how are we talking to userspace? Would one create subdevices and rejoin them via plughw?

Is it possible to start/stop the streams independently?

No, there's only a single start/stop call for the entire card.

Quoted 4 lines
Quoted 2 lines

Or use MMAP_COMPLEX and then let every application deal with it on its own?

Alsa-lib can automatically convert this.

The only remaining question is how to tell alsa-lib about the buffer layout.

AFAIKS, there's not even a single driver that uses MMAP_COMPLEX atm.

Cheers

Signature · 1 line
mail: [email protected]  	http://adi.thur.de	PGP/GPG: key via keyserver
#3 lore raw

At Tue, 9 Oct 2012 16:09:11 +0200,

Quoted 14 lines · Adrian Knoth
Quoted 8 lines · Clemens Ladisch
Quoted 6 lines

That is, we're dealing with 25 (or 26 for output) interleaved streams with two or eight channels each.

How could we represent such a layout in ALSA, that is, how are we talking to userspace? Would one create subdevices and rejoin them via plughw?

Is it possible to start/stop the streams independently?

No, there's only a single start/stop call for the entire card.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Or use MMAP_COMPLEX and then let every application deal with it on its own?

Alsa-lib can automatically convert this.

The only remaining question is how to tell alsa-lib about the buffer layout.

Pass SNDRV_PCM_INFO_COMPLEX to hw.info bit flags.
Then set up the channel_info via PCM ioctl ops.

Quoted 1 line

AFAIKS, there's not even a single driver that uses MMAP_COMPLEX atm.

Right. So far only in alsa-lib plugins.

Takashi