ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
Subsystems (5)
PATCH 1/1 ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
Remove arch/arm/plat-omap/include/plat/sdrc.h by folding its contents into arch/arm/mach-omap2/sdrc.h. The objective is to assist Tony in cleaning out arch/arm/plat-omap/, as his upstreams request.
---
This has a dependency on Tomi's "OMAP: VRFB: convert to platform device" series.
arch/arm/mach-omap2/board-omap3logic.c | 1 - arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 2 +- arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 2 +- arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1 - arch/arm/mach-omap2/control.c | 4 +- arch/arm/mach-omap2/gpmc.c | 1 - arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 1 - arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h | 2 +- arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 2 +- arch/arm/mach-omap2/sdram-nokia.c | 2 +- arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h | 2 +- .../mach-omap2/sdram-qimonda-hyb18m512160af-6.h | 2 +- arch/arm/mach-omap2/sdrc.c | 1 - arch/arm/mach-omap2/sdrc.h | 153 +++++++++++++++++- arch/arm/mach-omap2/sdrc2xxx.c | 1 - arch/arm/plat-omap/include/plat/sdrc.h | 164 -------------------- 17 files changed, 156 insertions(+), 187 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/sdrc.h
arch/arm/mach-omap2/board-omap3logic.c +0 -1
@@ -36,7 +36,6 @@#include "gpmc-smsc911x.h" #include <plat/gpmc.h> -#include <plat/sdrc.h> #include <plat/usb.h> #include "common.h"
arch/arm/mach-omap2/clkt2xxx_dpllcore.c +1 -1
@@ -27,13 +27,13 @@#include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +1 -1
@@ -35,7 +35,6 @@#include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "soc.h" #include "clock.h"
@@ -43,6 +42,7 @@#include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" const struct prcm_config *curr_prcm_set;const struct prcm_config *rate_table;
arch/arm/mach-omap2/clkt34xx_dpll3m2.c +0 -1
@@ -23,7 +23,6 @@#include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "clock.h" #include "clock3xxx.h"
arch/arm/mach-omap2/control.c +1 -3
@@ -1,7 +1,7 @@/* * OMAP2/3 System Control Module register access * -* Copyright (C) 2007 Texas Instruments, Inc. +* Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley
@@ -15,8 +15,6 @@#include <linux/kernel.h> #include <linux/io.h> -#include <plat/sdrc.h> -#include "soc.h" #include "iomap.h" #include "common.h"
arch/arm/mach-omap2/gpmc.c +0 -1
@@ -31,7 +31,6 @@#include <plat/cpu.h> #include <plat/gpmc.h> -#include <plat/sdrc.h> #include <plat/omap_device.h> #include "soc.h"
arch/arm/mach-omap2/io.c +1 -1
@@ -26,7 +26,6 @@#include <asm/mach/map.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include <plat/serial.h> #include <plat/omap-pm.h> #include <plat/omap_hwmod.h>
@@ -43,6 +42,7 @@#include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "sdrc.h" /* * The machine specific code may provide the extra mapping besides the
arch/arm/mach-omap2/pm34xx.c +0 -1
@@ -38,7 +38,6 @@#include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/sdrc.h> #include <plat/prcm.h> #include <plat/gpmc.h> #include <plat/dma.h>
arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +1 -1
@@ -11,7 +11,7 @@#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#include <plat/sdrc.h> +#include "sdrc.h" /* Hynix H8MBX00U0MER-0EM */ static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +1 -1
@@ -14,7 +14,7 @@#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <plat/sdrc.h> +#include "sdrc.h" /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
arch/arm/mach-omap2/sdram-nokia.c +1 -1
@@ -19,9 +19,9 @@#include "common.h" #include <plat/clock.h> -#include <plat/sdrc.h> #include "sdram-nokia.h" +#include "sdrc.h" /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ struct sdram_timings {
arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +1 -1
@@ -11,7 +11,7 @@#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#include <plat/sdrc.h> +#include "sdrc.h" /* Numonyx M65KXXXXAM */ static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +1 -1
@@ -14,7 +14,7 @@#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <plat/sdrc.h> +#include "sdrc.h" /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
arch/arm/mach-omap2/sdrc.c +0 -1
@@ -27,7 +27,6 @@#include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
arch/arm/mach-omap2/sdrc.h +147 -6
183 lines not on this page · raw message
arch/arm/mach-omap2/sdrc2xxx.c +0 -1
@@ -26,7 +26,6 @@#include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "soc.h" #include "iomap.h"
arch/arm/plat-omap/include/plat/sdrc.h deleted +0 -164
164 lines not on this page · raw message
Signature · 1 line
1.7.10.4
Tony Lindgren
maintainerPATCH 1/1 ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
Quoted 11 lines · Paul Walmsley
Remove
arch/arm/plat-omap/include/plat/sdrc.hby folding its contents intoarch/arm/mach-omap2/sdrc.h. The objective is to assist Tony in cleaning outarch/arm/plat-omap/, as his upstreams request.Signed-off-by Paul Walmsley <[email protected]>Cc Tony Lindgren <[email protected]>---
This has a dependency on Tomi's "OMAP: VRFB: convert to platform device" series.
Thanks applying this into omap-for-v3.8/cleanup-headers-dss.
Regards,
Tony