qdev patches: properties, id=<tag>, more device info
Subsystems (2)
cover qdev patches: properties, id=<tag>, more device info
Hi,
qdev properties patch series again, rebased and updated according to Pauls review comments. Replaces the qdev patches in anthonys queue.
What is in there?
First the qdev property rework. Quite big one, but as it puts the way properties work upside down it can hardly be split into smaller pieces. Since I posted it last time it got a bit larger due to some sparc devices being converted to qdev by BlueSwirl. The qdev_prop_set_* functions got typechecking support. They will also abort on failure.
The other patches are building on top of the properties. They are a bunch of little, self-contained and friendly patches. They bring:
* Support for attaching user-specified ids to devices (not fixed length any more).
* Add more info to DeviceInfo (alias, description).
The -device switch support has been removed due to concepts still being debated. These patches will be posted as separate patch series. So this patch series should be finally ready for merge.
cheers,
Gerd
PATCH 1/6 qdev: rework device properties.
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone.
Advantages:
* We don't have to maintain the list with the property values.
* The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored.
* A record describing the property is required now, you can't set random properties any more.
There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address.
Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed.
Properties can have default values. If unset they are zero-filled.
--- Makefile | 2 +- Makefile.hw | 2 +- hw/arm_sysctl.c | 20 +++- hw/armv7m.c | 22 ++++- hw/axis_dev88.c | 2 +- hw/eccmemctl.c | 21 ++++- hw/esp.c | 14 +-- hw/etraxfs.c | 2 +- hw/etraxfs_pic.c | 18 +++- hw/i2c.c | 11 ++- hw/i2c.h | 2 +- hw/integratorcp.c | 30 ++++-- hw/m48t59.c | 39 ++++++-- hw/mips_malta.c | 4 +- hw/musicpal.c | 2 +- hw/pc.c | 4 +- hw/pci.c | 17 +++- hw/pcnet.c | 19 +++- hw/qdev-addr.c | 32 +++++++ hw/qdev-addr.h | 2 + hw/qdev-properties.c | 246 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/qdev.c | 141 ++++------------------------ hw/qdev.h | 73 ++++++++++----- hw/slavio_misc.c | 6 - hw/smbus_eeprom.c | 10 ++- hw/smc91c111.c | 2 +- hw/stellaris.c | 2 +- hw/sun4m.c | 6 +- hw/syborg.c | 4 +- hw/syborg_fb.c | 45 ++++++---- hw/syborg_interrupt.c | 21 ++++- hw/syborg_keyboard.c | 21 ++++- hw/syborg_pointer.c | 29 +++++- hw/syborg_serial.c | 21 ++++- hw/syborg_timer.c | 11 ++- hw/tcx.c | 65 ++++++++++---- hw/xilinx.h | 12 +- hw/xilinx_ethlite.c | 29 +++++- hw/xilinx_intc.c | 18 +++- hw/xilinx_timer.c | 32 +++++-- 40 files changed, 757 insertions(+), 302 deletions(-) create mode 100644 hw/qdev-addr.c create mode 100644 hw/qdev-addr.h create mode 100644 hw/qdev-properties.c
Makefile +1 -1
@@ -108,7 +108,7 @@ obj-y += bt-hci-csr.o obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o obj-y += qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o obj-y += msmouse.o ps2.o -obj-y += qdev.o ssi.o +obj-y += qdev.o qdev-properties.o ssi.o obj-$(CONFIG_BRLAPI) += baum.o
Makefile.hw +1 -1
@@ -26,7 +26,7 @@ obj-y += m48t59.o escc.o # SCSI layer obj-y += lsi53c895a.o esp.o -obj-y += dma-helpers.o sysbus.o +obj-y += dma-helpers.o sysbus.o qdev-addr.o all: $(HWLIB) # Dummy command so that make thinks it has done something
hw/arm_sysctl.c +16 -4
@@ -194,7 +194,6 @@ static void arm_sysctl_init1(SysBusDevice *dev)arm_sysctl_state *s =FROM_SYSBUS (arm_sysctl_state, dev);int iomemtype; - s->sys_id =qdev_get_prop_int (&dev->qdev,"sys_id" ,0 );/* The MPcore bootloader uses these flags to start secondary CPUs. We don't use a bootloader, so do this here. */ s->flags =3 ;
@@ -210,15 +209,28 @@ void arm_sysctl_init(uint32_t base, uint32_t sys_id)DeviceState *dev; dev =qdev_create (NULL ,"realview_sysctl" ); -qdev_set_prop_int (dev,"sys_id" , sys_id); +qdev_prop_set_uint32 (dev,"sys_id" , sys_id);qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 , base); } +static SysBusDeviceInfo arm_sysctl_info = { + .init = arm_sysctl_init1, + .qdev.name ="realview_sysctl" , + .qdev.size =sizeof (arm_sysctl_state), + .qdev.props = (Property []) { + { + .name ="sys_id" , + .info = &qdev_prop_uint32, + .offset = offsetof(arm_sysctl_state , sys_id), + }, + {/* end of list */ } + } +}; +static void arm_sysctl_register_devices (void ) { -sysbus_register_dev ("realview_sysctl" ,sizeof (arm_sysctl_state), - arm_sysctl_init1); +sysbus_register_withprop (&arm_sysctl_info); }device_init (arm_sysctl_register_devices)
hw/armv7m.c +17 -5
@@ -127,7 +127,6 @@ static void bitband_init(SysBusDevice *dev)BitBandState *s =FROM_SYSBUS (BitBandState, dev);int iomemtype; - s->base =qdev_get_prop_int (&dev->qdev,"base" ,0 ); iomemtype =cpu_register_io_memory (bitband_readfn, bitband_writefn, &s->base);sysbus_init_mmio (dev,0x02000000 , iomemtype);
@@ -138,12 +137,12 @@ static void armv7m_bitband_init(void)DeviceState *dev; dev =qdev_create (NULL ,"ARM,bitband-memory" ); -qdev_set_prop_int (dev,"base" ,0x20000000 ); +qdev_prop_set_uint32 (dev,"base" ,0x20000000 );qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 ,0x22000000 ); dev =qdev_create (NULL ,"ARM,bitband-memory" ); -qdev_set_prop_int (dev,"base" ,0x40000000 ); +qdev_prop_set_uint32 (dev,"base" ,0x40000000 );qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 ,0x42000000 ); }
@@ -238,10 +237,23 @@ qemu_irq *armv7m_init(int flash_size, int sram_size,return pic; } +static SysBusDeviceInfo bitband_info = { + .init = bitband_init, + .qdev.name ="ARM,bitband-memory" , + .qdev.size =sizeof (BitBandState), + .qdev.props = (Property []) { + { + .name ="base" , + .info = &qdev_prop_hex32, + .offset = offsetof(BitBandState , base), + }, + {/* end of list */ } + } +}; +static void armv7m_register_devices (void ) { -sysbus_register_dev ("ARM,bitband-memory" ,sizeof (BitBandState), - bitband_init); +sysbus_register_withprop (&bitband_info); }device_init (armv7m_register_devices)
hw/axis_dev88.c +1 -1
@@ -297,7 +297,7 @@ void axisdev88_init (ram_addr_t ram_size, cpu_irq =cris_pic_init_cpu (env); dev =qdev_create (NULL ,"etraxfs,pic" );/* FIXME: Is there a proper way to signal vectors to the CPU core? */ -qdev_set_prop_ptr (dev,"interrupt_vector" , &env->interrupt_vector); +qdev_prop_set_ptr (dev,"interrupt_vector" , &env->interrupt_vector);qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_mmio_map (s,0 ,0x3001c000 );
hw/eccmemctl.c +18 -3
@@ -321,7 +321,6 @@ static void ecc_init1(SysBusDevice *dev)ECCState *s =FROM_SYSBUS (ECCState, dev);sysbus_init_irq (dev, &s->irq); - s->version =qdev_get_prop_int (&dev->qdev,"version" ,-1 ); s->regs[0 ] = s->version; ecc_io_memory =cpu_register_io_memory (ecc_mem_read, ecc_mem_write, s);sysbus_init_mmio (dev,ECC_SIZE , ecc_io_memory);
@@ -342,7 +341,7 @@ void ecc_init(target_phys_addr_t base, qemu_irq irq, uint32_t version)SysBusDevice *s; dev =qdev_create (NULL ,"eccmemctl" ); -qdev_set_prop_int (dev,"version" , version); +qdev_prop_set_uint32 (dev,"version" , version);qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_connect_irq (s,0 , irq);
@@ -352,9 +351,25 @@ void ecc_init(target_phys_addr_t base, qemu_irq irq, uint32_t version) } } +static SysBusDeviceInfo ecc_info = { + .init = ecc_init1, + .qdev.name ="eccmemctl" , + .qdev.size =sizeof (ECCState), + .qdev.props = (Property []) { + { + .name ="version" , + .info = &qdev_prop_uint32, + .offset = offsetof(ECCState , version), + .defval = (uint32_t []) {-1 }, + }, + {/* end of list */ } + } +}; + +static void ecc_register_devices (void ) { -sysbus_register_dev ("eccmemctl" ,sizeof (ECCState), ecc_init1); +sysbus_register_withprop (&ecc_info); }device_init (ecc_register_devices)
hw/esp.c +6 -8
@@ -650,12 +650,14 @@ void esp_init(target_phys_addr_t espaddr, int it_shift, {DeviceState *dev;SysBusDevice *s; +ESPState *esp; dev =qdev_create (NULL ,"esp" ); -qdev_set_prop_ptr (dev,"dma_memory_read" , dma_memory_read); -qdev_set_prop_ptr (dev,"dma_memory_write" , dma_memory_write); -qdev_set_prop_ptr (dev,"dma_opaque" , dma_opaque); -qdev_set_prop_int (dev,"it_shift" , it_shift); + esp =DO_UPCAST (ESPState, busdev.qdev, dev); + esp->dma_memory_read = dma_memory_read; + esp->dma_memory_write = dma_memory_write; + esp->dma_opaque = dma_opaque; + esp->it_shift = it_shift;qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_connect_irq (s,0 , irq);
@@ -668,11 +670,7 @@ static void esp_init1(SysBusDevice *dev)int esp_io_memory;sysbus_init_irq (dev, &s->irq); - s->it_shift =qdev_get_prop_int (&dev->qdev,"it_shift" ,-1 );assert (s->it_shift !=-1 ); - s->dma_memory_read =qdev_get_prop_ptr (&dev->qdev,"dma_memory_read" ); - s->dma_memory_write =qdev_get_prop_ptr (&dev->qdev,"dma_memory_write" ); - s->dma_opaque =qdev_get_prop_ptr (&dev->qdev,"dma_opaque" ); esp_io_memory =cpu_register_io_memory (esp_mem_read, esp_mem_write, s);sysbus_init_mmio (dev,ESP_REGS << s->it_shift, esp_io_memory);
hw/etraxfs.c +1 -1
@@ -88,7 +88,7 @@ void bareetraxfs_init (ram_addr_t ram_size, cpu_irq =cris_pic_init_cpu (env); dev =qdev_create (NULL ,"etraxfs,pic" );/* FIXME: Is there a proper way to signal vectors to the CPU core? */ -qdev_set_prop_ptr (dev,"interrupt_vector" , &env->interrupt_vector); +qdev_prop_set_ptr (dev,"interrupt_vector" , &env->interrupt_vector);qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_mmio_map (s,0 ,0x3001c000 );
hw/etraxfs_pic.c +15 -3
@@ -140,7 +140,6 @@ static void etraxfs_pic_init(SysBusDevice *dev)struct etrax_pic *s =FROM_SYSBUS (typeof (*s), dev);int intr_vect_regs; - s->interrupt_vector =qdev_get_prop_ptr (&dev->qdev,"interrupt_vector" );qdev_init_gpio_in (&dev->qdev, irq_handler,32 );sysbus_init_irq (dev, &s->parent_irq);sysbus_init_irq (dev, &s->parent_nmi);
@@ -149,10 +148,23 @@ static void etraxfs_pic_init(SysBusDevice *dev)sysbus_init_mmio (dev,R_MAX *4 , intr_vect_regs); } +static SysBusDeviceInfo etraxfs_pic_info = { + .init = etraxfs_pic_init, + .qdev.name ="etraxfs,pic" , + .qdev.size =sizeof (struct etrax_pic ), + .qdev.props = (Property []) { + { + .name ="interrupt_vector" , + .info = &qdev_prop_ptr, + .offset = offsetof(struct etrax_pic , interrupt_vector), + }, + {/* end of list */ } + } +}; +static void etraxfs_pic_register (void ) { -sysbus_register_dev ("etraxfs,pic" ,sizeof (struct etrax_pic ), - etraxfs_pic_init); +sysbus_register_withprop (&etraxfs_pic_info); }device_init (etraxfs_pic_register)
hw/i2c.c +9 -2
@@ -20,6 +20,14 @@ struct i2c_busstatic struct BusInfo i2c_bus_info = { .name ="I2C" , .size =sizeof (i2c_bus), + .props = (Property []) { + { + .name ="address" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct i2c_slave , address), + }, + {/* end of list */ } + } };static void i2c_bus_save (QEMUFile *f,void *opaque)
@@ -151,7 +159,6 @@ static void i2c_slave_qdev_init(DeviceState *dev, DeviceInfo *base)i2c_slave *s =I2C_SLAVE_FROM_QDEV (dev); s->info = info; - s->address =qdev_get_prop_int (dev,"address" ,0 ); info->init (s); }
@@ -169,7 +176,7 @@ DeviceState *i2c_create_slave(i2c_bus *bus, const char *name, int addr)DeviceState *dev; dev =qdev_create (&bus->qbus, name); -qdev_set_prop_int (dev,"address" , addr); +qdev_prop_set_uint32 (dev,"address" , addr);qdev_init (dev);return dev; }
hw/i2c.h +1 -1
@@ -40,7 +40,7 @@ struct i2c_slaveI2CSlaveInfo *info;/* Remaining fields for internal use by the I2C code. */ -int address; +uint32_t address; };i2c_bus *i2c_init_bus (DeviceState *parent,const char *name);
hw/integratorcp.c +21 -9
@@ -17,6 +17,7 @@ typedef struct { SysBusDevice busdev; + uint32_t memsz; uint32_t flash_offset; uint32_t cm_osc; uint32_t cm_ctrl;
@@ -230,23 +231,21 @@ static void integratorcm_init(SysBusDevice *dev) {int iomemtype;integratorcm_state *s =FROM_SYSBUS (integratorcm_state, dev); -int memsz; - memsz =qdev_get_prop_int (&dev->qdev,"memsz" ,0 ); s->cm_osc =0x01000048 ;/* ??? What should the high bits of this value be? */ s->cm_auxosc =0x0007feff ; s->cm_sdram =0x00011122 ; -if (memsz >=256 ) { +if (s->memsz >=256 ) { integrator_spd[31 ] =64 ; s->cm_sdram |=0x10 ; - }else if (memsz >=128 ) { + }else if (s->memsz >=128 ) { integrator_spd[31 ] =32 ; s->cm_sdram |=0x0c ; - }else if (memsz >=64 ) { + }else if (s->memsz >=64 ) { integrator_spd[31 ] =16 ; s->cm_sdram |=0x08 ; - }else if (memsz >=32 ) { + }else if (s->memsz >=32 ) { integrator_spd[31 ] =4 ; s->cm_sdram |=0x04 ; }else {
@@ -475,7 +474,7 @@ static void integratorcp_init(ram_addr_t ram_size,cpu_register_physical_memory (0x80000000 , ram_size, ram_offset |IO_MEM_RAM ); dev =qdev_create (NULL ,"integrator_core" ); -qdev_set_prop_int (dev,"memsz" , ram_size >>20 ); +qdev_prop_set_uint32 (dev,"memsz" , ram_size >>20 );qdev_init (dev);sysbus_mmio_map ((SysBusDevice *)dev,0 ,0x10000000 );
@@ -522,11 +521,24 @@ static void integratorcp_machine_init(void)machine_init (integratorcp_machine_init); +static SysBusDeviceInfo core_info = { + .init = integratorcm_init, + .qdev.name ="integrator_core" , + .qdev.size =sizeof (integratorcm_state), + .qdev.props = (Property []) { + { + .name ="memsz" , + .info = &qdev_prop_uint32, + .offset = offsetof(integratorcm_state , memsz), + }, + {/* end of list */ } + } +}; +static void integratorcp_register_devices (void ) {sysbus_register_dev ("integrator_pic" ,sizeof (icp_pic_state), icp_pic_init); -sysbus_register_dev ("integrator_core" ,sizeof (integratorcm_state), - integratorcm_init); +sysbus_register_withprop (&core_info); }device_init (integratorcp_register_devices)
hw/m48t59.c +30 -9
@@ -43,11 +43,11 @@struct m48t59_t {SysBusDevice busdev;/* Model parameters */ -int type;// 2 = m48t02, 8 = m48t08, 59 = m48t59 +uint32_t type;// 2 = m48t02, 8 = m48t08, 59 = m48t59 /* Hardware parameters */ qemu_irq IRQ;uint32_t io_base; -uint16_t size; +uint32_t size;/* RTC management */ time_t time_offset;time_t stop_time;
@@ -623,9 +623,9 @@ m48t59_t *m48t59_init (qemu_irq IRQ, target_phys_addr_t mem_base,m48t59_t *d; dev =qdev_create (NULL ,"m48t59" ); -qdev_set_prop_int (dev,"type" , type); -qdev_set_prop_int (dev,"size" , size); -qdev_set_prop_int (dev,"io_base" , io_base); +qdev_prop_set_uint32 (dev,"type" , type); +qdev_prop_set_uint32 (dev,"size" , size); +qdev_prop_set_uint32 (dev,"io_base" , io_base);qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_connect_irq (s,0 ,IRQ );
@@ -647,11 +647,8 @@ static void m48t59_init1(SysBusDevice *dev)m48t59_t *s =FROM_SYSBUS (m48t59_t, dev);int mem_index; - s->size =qdev_get_prop_int (&dev->qdev,"size" ,-1 ); s->buffer =qemu_mallocz (s->size);sysbus_init_irq (dev, &s->IRQ); - s->io_base =qdev_get_prop_int (&dev->qdev,"io_base" ,0 ); - s->type =qdev_get_prop_int (&dev->qdev,"type" ,-1 ); mem_index =cpu_register_io_memory (nvram_read, nvram_write, s);sysbus_init_mmio (dev, s->size, mem_index);
@@ -666,9 +663,33 @@ static void m48t59_init1(SysBusDevice *dev)register_savevm ("m48t59" ,-1 ,1 , m48t59_save, m48t59_load, s); } +static SysBusDeviceInfo m48t59_info = { + .init = m48t59_init1, + .qdev.name ="m48t59" , + .qdev.size =sizeof (m48t59_t), + .qdev.props = (Property []) { + { + .name ="size" , + .info = &qdev_prop_uint32, + .offset = offsetof(m48t59_t , size), + .defval = (uint32_t []) {-1 }, + },{ + .name ="type" , + .info = &qdev_prop_uint32, + .offset = offsetof(m48t59_t , type), + .defval = (uint32_t []) {-1 }, + },{ + .name ="io_base" , + .info = &qdev_prop_hex32, + .offset = offsetof(m48t59_t , io_base), + }, + {/* end of list */ } + } +}; +static void m48t59_register_devices (void ) { -sysbus_register_dev ("m48t59" ,sizeof (m48t59_t), m48t59_init1); +sysbus_register_withprop (&m48t59_info); }device_init (m48t59_register_devices)
hw/mips_malta.c +2 -2
@@ -914,8 +914,8 @@ void mips_malta_init (ram_addr_t ram_size,/* TODO: Populate SPD eeprom data. */ DeviceState *eeprom; eeprom =qdev_create ((BusState *)smbus,"smbus-eeprom" ); -qdev_set_prop_int (eeprom,"address" ,0x50 + i); -qdev_set_prop_ptr (eeprom,"data" , eeprom_buf + (i *256 )); +qdev_prop_set_uint32 (eeprom,"address" ,0x50 + i); +qdev_prop_set_ptr (eeprom,"data" , eeprom_buf + (i *256 ));qdev_init (eeprom); } pit =pit_init (0x40 , i8259[0 ]);
hw/musicpal.c +1 -1
@@ -1578,7 +1578,7 @@ static void musicpal_init(ram_addr_t ram_size,qemu_check_nic_model (&nd_table[0 ],"mv88w8618" ); dev =qdev_create (NULL ,"mv88w8618_eth" ); -qdev_set_netdev (dev, &nd_table[0 ]); + dev->nd = &nd_table[0 ];qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 ,MP_ETH_BASE );sysbus_connect_irq (sysbus_from_qdev (dev),0 , pic[MP_ETH_IRQ ]);
hw/pc.c +2 -2
@@ -1374,8 +1374,8 @@ static void pc_init1(ram_addr_t ram_size,for (i =0 ; i <8 ; i++) {DeviceState *eeprom; eeprom =qdev_create ((BusState *)smbus,"smbus-eeprom" ); -qdev_set_prop_int (eeprom,"address" ,0x50 + i); -qdev_set_prop_ptr (eeprom,"data" , eeprom_buf + (i *256 )); +qdev_prop_set_uint32 (eeprom,"address" ,0x50 + i); +qdev_prop_set_ptr (eeprom,"data" , eeprom_buf + (i *256 ));qdev_init (eeprom); } }
hw/pci.c +13 -4
@@ -54,6 +54,15 @@ static struct BusInfo pci_bus_info = { .name = "PCI", .size = sizeof(PCIBus), .print_dev = pcibus_dev_print, + .props = (Property []) { + { + .name ="devfn" , + .info = &qdev_prop_uint32, + .offset = offsetof(PCIDevice , devfn), + .defval = (uint32_t []) {-1 }, + }, + {/* end of list */ } + } };static void pci_update_mappings (PCIDevice *d);
@@ -769,7 +778,7 @@ PCIDevice *pci_create(const char *name, const char *devaddr) } dev =qdev_create (&bus->qbus, name); -qdev_set_prop_int (dev,"devfn" , devfn); +qdev_prop_set_uint32 (dev,"devfn" , devfn);return (PCIDevice *)dev; }
@@ -812,7 +821,7 @@ PCIDevice *pci_nic_init(NICInfo *nd, const char *default_model,if (strcmp (nd->model, pci_nic_models[i]) ==0 ) { pci_dev =pci_create (pci_nic_names[i], devaddr); dev = &pci_dev->qdev; -qdev_set_netdev (dev, nd); + dev->nd = nd;qdev_init (dev); nd->private = dev;return pci_dev;
@@ -890,7 +899,7 @@ static void pci_qdev_init(DeviceState *qdev, DeviceInfo *base)int devfn; bus =FROM_QBUS (PCIBus,qdev_get_parent_bus (qdev)); - devfn =qdev_get_prop_int (qdev,"devfn" ,-1 ); + devfn = pci_dev->devfn; pci_dev =do_pci_register_device (pci_dev, bus, base->name, devfn, info->config_read, info->config_write);assert (pci_dev);
@@ -917,7 +926,7 @@ PCIDevice *pci_create_simple(PCIBus *bus, int devfn, const char *name)DeviceState *dev; dev =qdev_create (&bus->qbus, name); -qdev_set_prop_int (dev,"devfn" , devfn); +qdev_prop_set_uint32 (dev,"devfn" , devfn);qdev_init (dev);return (PCIDevice *)dev;
hw/pcnet.c +16 -3
@@ -2128,8 +2128,6 @@ static void lance_init(SysBusDevice *dev) s->mmio_index =cpu_register_io_memory (lance_mem_read, lance_mem_write, d); - s->dma_opaque =qdev_get_prop_ptr (&dev->qdev,"dma" ); -qdev_init_gpio_in (&dev->qdev, parent_lance_reset,1 );sysbus_init_mmio (dev,4 , s->mmio_index);
@@ -2141,6 +2139,21 @@ static void lance_init(SysBusDevice *dev)pcnet_common_init (&dev->qdev, s, lance_cleanup); } + +static SysBusDeviceInfo lance_info = { + .init = lance_init, + .qdev.name ="lance" , + .qdev.size =sizeof (SysBusPCNetState), + .qdev.props = (Property []) { + { + .name ="dma" , + .info = &qdev_prop_ptr, + .offset = offsetof(SysBusPCNetState, state.dma_opaque), + }, + {/* end of list */ } + } +}; +#endif /* TARGET_SPARC */ static PCIDeviceInfo pcnet_info = {
@@ -2153,7 +2166,7 @@ static void pcnet_register_devices(void) {pci_qdev_register (&pcnet_info);#if defined (TARGET_SPARC ) && !defined(TARGET_SPARC64 ) -sysbus_register_dev ("lance" ,sizeof (SysBusPCNetState), lance_init); +sysbus_register_withprop (&lance_info);#endif }
hw/qdev-addr.c new file +32 -0
@@ -0,0 +1,32 @@ +#include "qdev.h" +#include "qdev-addr.h" +#include "targphys.h" + +/* --- target physical address --- */ + +static int parse_taddr (DeviceState *dev,Property *prop,const char *str) +{ +target_phys_addr_t *ptr =qdev_get_prop_ptr (dev, prop); + + *ptr =strtoull (str,NULL ,16 ); +return 0 ; +} + +static int print_taddr (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +target_phys_addr_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"0x" TARGET_FMT_plx, *ptr); +} + +PropertyInfo qdev_prop_taddr = { + .name ="taddr" , + .type =PROP_TYPE_TADDR , + .size =sizeof (target_phys_addr_t), + .parse = parse_taddr, + .print = print_taddr, +}; + +void qdev_prop_set_taddr (DeviceState *dev,const char *name,target_phys_addr_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_TADDR ); +}
hw/qdev-addr.h new file +2 -0
@@ -0,0 +1,2 @@ +extern PropertyInfo qdev_prop_taddr; +void qdev_prop_set_taddr (DeviceState *dev,const char *name,target_phys_addr_t value);
hw/qdev-properties.c new file +246 -0
246 lines not on this page · raw message
hw/qdev.c +20 -121
179 lines not on this page · raw message
hw/qdev.h +48 -25
126 lines not on this page · raw message
hw/slavio_misc.c +0 -6
@@ -564,18 +564,12 @@ static SysBusDeviceInfo slavio_misc_info = { .init = slavio_misc_init1, .qdev.name = "slavio_misc", .qdev.size = sizeof(MiscState), - .qdev.props = (DevicePropList []) { - {.name =NULL } - } };static SysBusDeviceInfo apc_info = { .init = apc_init1, .qdev.name ="apc" , .qdev.size =sizeof (MiscState), - .qdev.props = (DevicePropList []) { - {.name =NULL } - } };static void slavio_misc_register_devices (void )
hw/smbus_eeprom.c +8 -2
@@ -99,14 +99,20 @@ static void smbus_eeprom_init(SMBusDevice *dev) {SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *)dev; -/* FIXME: Should be a blob rather than a ptr. */ - eeprom->data =qdev_get_prop_ptr (&dev->i2c.qdev,"data" ); eeprom->offset =0 ; }static SMBusDeviceInfo smbus_eeprom_info = { .i2c.qdev.name ="smbus-eeprom" , .i2c.qdev.size =sizeof (SMBusEEPROMDevice), + .i2c.qdev.props = (Property []) { + { + .name ="data" , + .info = &qdev_prop_ptr, + .offset = offsetof(SMBusEEPROMDevice , data), + }, + {/* end of list */ } + }, .init = smbus_eeprom_init, .quick_cmd = eeprom_quick_cmd, .send_byte = eeprom_send_byte,
hw/smc91c111.c +1 -1
@@ -733,7 +733,7 @@ void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)qemu_check_nic_model (nd,"smc91c111" ); dev =qdev_create (NULL ,"smc91c111" ); -qdev_set_netdev (dev, nd); + dev->nd = nd;qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_mmio_map (s,0 , base);
hw/stellaris.c +1 -1
@@ -1378,7 +1378,7 @@ static void stellaris_init(const char *kernel_filename, const char *cpu_model,qemu_check_nic_model (&nd_table[0 ],"stellaris" ); enet =qdev_create (NULL ,"stellaris_enet" ); -qdev_set_netdev (enet, &nd_table[0 ]); + enet->nd = &nd_table[0 ];qdev_init (enet);sysbus_mmio_map (sysbus_from_qdev (enet),0 ,0x40048000 );sysbus_connect_irq (sysbus_from_qdev (enet),0 , pic[42 ]);
hw/sun4m.c +1 -5
@@ -373,8 +373,7 @@ static void lance_init(NICInfo *nd, target_phys_addr_t leaddr,qemu_check_nic_model (&nd_table[0 ],"lance" ); dev =qdev_create (NULL ,"lance" ); -qdev_set_netdev (dev, nd); -qdev_set_prop_ptr (dev,"dma" , dma_opaque); + dev->nd = nd;qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_mmio_map (s,0 , leaddr);
@@ -410,9 +409,6 @@ static SysBusDeviceInfo idreg_info = { .init = idreg_init1, .qdev.name = "macio_idreg", .qdev.size = sizeof(SysBusDevice), - .qdev.props = (DevicePropList []) { - {.name =NULL } - } };static void idreg_register_devices (void )
hw/syborg.c +2 -2
@@ -64,7 +64,7 @@ static void syborg_init(ram_addr_t ram_size,sysbus_create_simple ("syborg,rtc" ,0xC0001000 ,NULL ); dev =qdev_create (NULL ,"syborg,timer" ); -qdev_set_prop_int (dev,"frequency" ,1000000 ); +qdev_prop_set_uint32 (dev,"frequency" ,1000000 );qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 ,0xC0002000 );sysbus_connect_irq (sysbus_from_qdev (dev),0 , pic[1 ]);
@@ -83,7 +83,7 @@ static void syborg_init(ram_addr_t ram_size,qemu_check_nic_model (&nd_table[0 ],"virtio" ); dev =qdev_create (NULL ,"syborg,virtio-net" ); -qdev_set_netdev (dev, &nd_table[0 ]); + dev->nd = &nd_table[0 ];qdev_init (dev); s =sysbus_from_qdev (dev);sysbus_mmio_map (s,0 ,0xc000c000 );
hw/syborg_fb.c +27 -18
76 lines not on this page · raw message
hw/syborg_interrupt.c +17 -4
@@ -56,7 +56,7 @@ typedef struct {typedef struct {SysBusDevice busdev;int pending_count; -int num_irqs; +uint32_t num_irqs;syborg_int_flags *flags;qemu_irq parent_irq; }SyborgIntState ;
@@ -208,7 +208,6 @@ static void syborg_int_init(SysBusDevice *dev)int iomemtype;sysbus_init_irq (dev, &s->parent_irq); - s->num_irqs =qdev_get_prop_int (&dev->qdev,"num-interrupts" ,64 );qdev_init_gpio_in (&dev->qdev, syborg_int_set_irq, s->num_irqs); iomemtype =cpu_register_io_memory (syborg_int_readfn, syborg_int_writefn, s);
@@ -218,10 +217,24 @@ static void syborg_int_init(SysBusDevice *dev)register_savevm ("syborg_int" ,-1 ,1 , syborg_int_save, syborg_int_load, s); } +static SysBusDeviceInfo syborg_int_info = { + .init = syborg_int_init, + .qdev.name ="syborg,interrupt" , + .qdev.size =sizeof (SyborgIntState), + .qdev.props = (Property []) { + { + .name ="num-interrupts" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgIntState , num_irqs), + .defval = (uint32_t []) {64 }, + }, + {/* end of list */ } + } +}; +static void syborg_interrupt_register_devices (void ) { -sysbus_register_dev ("syborg,interrupt" ,sizeof (SyborgIntState), - syborg_int_init); +sysbus_register_withprop (&syborg_int_info); }device_init (syborg_interrupt_register_devices)
hw/syborg_keyboard.c +17 -4
@@ -53,7 +53,7 @@ typedef struct {SysBusDevice busdev;int int_enabled;int extension_bit; -int fifo_size; +uint32_t fifo_size;uint32_t *key_fifo;int read_pos, read_count;qemu_irq irq;
@@ -212,7 +212,6 @@ static void syborg_keyboard_init(SysBusDevice *dev) iomemtype =cpu_register_io_memory (syborg_keyboard_readfn, syborg_keyboard_writefn, s);sysbus_init_mmio (dev,0x1000 , iomemtype); - s->fifo_size =qdev_get_prop_int (&dev->qdev,"fifo-size" ,16 );if (s->fifo_size <=0 ) {fprintf (stderr,"syborg_keyboard: fifo too small\n" ); s->fifo_size =16 ;
@@ -225,10 +224,24 @@ static void syborg_keyboard_init(SysBusDevice *dev) syborg_keyboard_save, syborg_keyboard_load, s); } +static SysBusDeviceInfo syborg_keyboard_info = { + .init = syborg_keyboard_init, + .qdev.name ="syborg,keyboard" , + .qdev.size =sizeof (SyborgKeyboardState), + .qdev.props = (Property []) { + { + .name ="fifo-size" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgKeyboardState , fifo_size), + .defval = (uint32_t []) {16 }, + }, + {/* end of list */ } + } +}; +static void syborg_keyboard_register_devices (void ) { -sysbus_register_dev ("syborg,keyboard" ,sizeof (SyborgKeyboardState), - syborg_keyboard_init); +sysbus_register_withprop (&syborg_keyboard_info); }device_init (syborg_keyboard_register_devices)
hw/syborg_pointer.c +23 -6
@@ -45,11 +45,11 @@ typedef struct {typedef struct {SysBusDevice busdev;int int_enabled; -int fifo_size; +uint32_t fifo_size;event_data *event_fifo;int read_pos, read_count;qemu_irq irq; -int absolute; +uint32_t absolute; }SyborgPointerState ;static void syborg_pointer_update (SyborgPointerState *s)
@@ -209,8 +209,6 @@ static void syborg_pointer_init(SysBusDevice *dev) syborg_pointer_writefn, s);sysbus_init_mmio (dev,0x1000 , iomemtype); - s->absolute =qdev_get_prop_int (&dev->qdev,"absolute" ,1 ); - s->fifo_size =qdev_get_prop_int (&dev->qdev,"fifo-size" ,16 );if (s->fifo_size <=0 ) {fprintf (stderr,"syborg_pointer: fifo too small\n" ); s->fifo_size =16 ;
@@ -224,10 +222,29 @@ static void syborg_pointer_init(SysBusDevice *dev) syborg_pointer_save, syborg_pointer_load, s); } +static SysBusDeviceInfo syborg_pointer_info = { + .init = syborg_pointer_init, + .qdev.name ="syborg,pointer" , + .qdev.size =sizeof (SyborgPointerState), + .qdev.props = (Property []) { + { + .name ="fifo-size" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgPointerState , fifo_size), + .defval = (uint32_t []) {16 }, + },{ + .name ="absolute" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgPointerState , absolute), + .defval = (uint32_t []) {1 }, + }, + {/* end of list */ } + } +}; +static void syborg_pointer_register_devices (void ) { -sysbus_register_dev ("syborg,pointer" ,sizeof (SyborgPointerState), - syborg_pointer_init); +sysbus_register_withprop (&syborg_pointer_info); }device_init (syborg_pointer_register_devices)
hw/syborg_serial.c +17 -4
@@ -59,7 +59,7 @@ enum { typedef struct { SysBusDevice busdev; uint32_t int_enable; - int fifo_size; + uint32_t fifo_size; uint32_t *read_fifo; int read_pos; int read_count;
@@ -329,7 +329,6 @@ static void syborg_serial_init(SysBusDevice *dev)qemu_chr_add_handlers (s->chr, syborg_serial_can_receive, syborg_serial_receive, syborg_serial_event, s); } - s->fifo_size =qdev_get_prop_int (&dev->qdev,"fifo-size" ,16 );if (s->fifo_size <=0 ) {fprintf (stderr,"syborg_serial: fifo too small\n" ); s->fifo_size =16 ;
@@ -340,10 +339,24 @@ static void syborg_serial_init(SysBusDevice *dev) syborg_serial_save, syborg_serial_load, s); } +static SysBusDeviceInfo syborg_serial_info = { + .init = syborg_serial_init, + .qdev.name ="syborg,serial" , + .qdev.size =sizeof (SyborgSerialState), + .qdev.props = (Property []) { + { + .name ="fifo-size" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgSerialState , fifo_size), + .defval = (uint32_t []) {16 }, + }, + {/* end of list */ } + } +}; +static void syborg_serial_register_devices (void ) { -sysbus_register_dev ("syborg,serial" ,sizeof (SyborgSerialState), - syborg_serial_init); +sysbus_register_withprop (&syborg_serial_info); }device_init (syborg_serial_register_devices)
hw/syborg_timer.c +7 -4
@@ -209,7 +209,6 @@ static void syborg_timer_init(SysBusDevice *dev)QEMUBH *bh;int iomemtype; - s->freq =qdev_get_prop_int (&dev->qdev,"frequency" ,0 );if (s->freq ==0 ) {fprintf (stderr,"syborg_timer: Zero/unset frequency\n" );exit (1 );
@@ -230,9 +229,13 @@ static SysBusDeviceInfo syborg_timer_info = { .init = syborg_timer_init, .qdev.name = "syborg,timer", .qdev.size = sizeof(SyborgTimerState), - .qdev.props = (DevicePropList []) { - {.name ="frequency" , .type =PROP_TYPE_INT }, - {.name =NULL } + .qdev.props = (Property []) { + { + .name ="frequency" , + .info = &qdev_prop_uint32, + .offset = offsetof(SyborgTimerState , freq), + }, + {/* end of list */ } } };
hw/tcx.c +48 -17
116 lines not on this page · raw message
hw/xilinx.h +6 -6
@@ -8,7 +8,7 @@ xilinx_intc_create(target_phys_addr_t base, qemu_irq irq, int kind_of_intr)DeviceState *dev; dev =qdev_create (NULL ,"xilinx,intc" ); -qdev_set_prop_int (dev,"kind-of-intr" , kind_of_intr); +qdev_prop_set_uint32 (dev,"kind-of-intr" , kind_of_intr);qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 , base);sysbus_connect_irq (sysbus_from_qdev (dev),0 , irq);
@@ -22,8 +22,8 @@ xilinx_timer_create(target_phys_addr_t base, qemu_irq irq, int nr, int freq)DeviceState *dev; dev =qdev_create (NULL ,"xilinx,timer" ); -qdev_set_prop_int (dev,"nr-timers" , nr); -qdev_set_prop_int (dev,"frequency" , freq); +qdev_prop_set_uint32 (dev,"nr-timers" , nr); +qdev_prop_set_uint32 (dev,"frequency" , freq);qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 , base);sysbus_connect_irq (sysbus_from_qdev (dev),0 , irq);
@@ -40,9 +40,9 @@ xilinx_ethlite_create(NICInfo *nd, target_phys_addr_t base, qemu_irq irq,qemu_check_nic_model (nd,"xilinx-ethlite" ); dev =qdev_create (NULL ,"xilinx,ethlite" ); -qdev_set_netdev (dev, nd); -qdev_set_prop_int (dev,"txpingpong" , txpingpong); -qdev_set_prop_int (dev,"rxpingpong" , rxpingpong); + dev->nd = nd; +qdev_prop_set_uint32 (dev,"txpingpong" , txpingpong); +qdev_prop_set_uint32 (dev,"rxpingpong" , rxpingpong);qdev_init (dev);sysbus_mmio_map (sysbus_from_qdev (dev),0 , base);sysbus_connect_irq (sysbus_from_qdev (dev),0 , irq);
hw/xilinx_ethlite.c +23 -6
@@ -53,8 +53,8 @@ struct xlx_ethliteqemu_irq irq;VLANClientState *vc; -unsigned int c_tx_pingpong; -unsigned int c_rx_pingpong; +uint32_t c_tx_pingpong; +uint32_t c_rx_pingpong;unsigned int txbuf;unsigned int rxbuf;
@@ -213,8 +213,6 @@ static void xilinx_ethlite_init(SysBusDevice *dev)int regs;sysbus_init_irq (dev, &s->irq); - s->c_tx_pingpong =qdev_get_prop_int (&dev->qdev,"txpingpong" ,1 ); - s->c_rx_pingpong =qdev_get_prop_int (&dev->qdev,"rxpingpong" ,1 ); s->rxbuf =0 ; regs =cpu_register_io_memory (eth_read, eth_write, s);
@@ -225,10 +223,29 @@ static void xilinx_ethlite_init(SysBusDevice *dev) eth_can_rx, eth_rx, NULL, eth_cleanup, s); } +static SysBusDeviceInfo xilinx_ethlite_info = { + .init = xilinx_ethlite_init, + .qdev.name ="xilinx,ethlite" , + .qdev.size =sizeof (struct xlx_ethlite ), + .qdev.props = (Property []) { + { + .name ="txpingpong" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct xlx_ethlite , c_tx_pingpong), + .defval = (uint32_t []) {1 }, + },{ + .name ="rxpingpong" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct xlx_ethlite , c_rx_pingpong), + .defval = (uint32_t []) {1 }, + }, + {/* end of list */ } + } +}; +static void xilinx_ethlite_register (void ) { -sysbus_register_dev ("xilinx,ethlite" ,sizeof (struct xlx_ethlite ), - xilinx_ethlite_init); +sysbus_register_withprop (&xilinx_ethlite_info); }device_init (xilinx_ethlite_register)
hw/xilinx_intc.c +15 -3
@@ -150,7 +150,6 @@ static void xilinx_intc_init(SysBusDevice *dev)struct xlx_pic *p =FROM_SYSBUS (typeof (*p), dev);int pic_regs; - p->c_kind_of_intr =qdev_get_prop_int (&dev->qdev,"kind-of-intr" ,0 );qdev_init_gpio_in (&dev->qdev, irq_handler,32 );sysbus_init_irq (dev, &p->parent_irq);
@@ -158,10 +157,23 @@ static void xilinx_intc_init(SysBusDevice *dev)sysbus_init_mmio (dev,R_MAX *4 , pic_regs); } +static SysBusDeviceInfo xilinx_intc_info = { + .init = xilinx_intc_init, + .qdev.name ="xilinx,intc" , + .qdev.size =sizeof (struct xlx_pic ), + .qdev.props = (Property []) { + { + .name ="kind-of-intr" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct xlx_pic , c_kind_of_intr), + }, + {/* end of list */ } + } +}; +static void xilinx_intc_register (void ) { -sysbus_register_dev ("xilinx,intc" ,sizeof (struct xlx_pic ), - xilinx_intc_init); +sysbus_register_withprop (&xilinx_intc_info); }device_init (xilinx_intc_register)
hw/xilinx_timer.c +25 -7
@@ -61,7 +61,8 @@ struct timerblock {SysBusDevice busdev;qemu_irq irq; -unsigned int nr_timers; +uint32_t nr_timers; +uint32_t freq_hz;struct xlx_timer *timers; };
@@ -192,14 +193,12 @@ static void xilinx_timer_init(SysBusDevice *dev) {struct timerblock *t =FROM_SYSBUS (typeof (*t), dev);unsigned int i; -int timer_regs, freq_hz; +int timer_regs;/* All timers share a single irq line. */ sysbus_init_irq (dev, &t->irq);/* Init all the ptimers. */ - freq_hz =qdev_get_prop_int (&dev->qdev,"frequency" ,2 ); - t->nr_timers =qdev_get_prop_int (&dev->qdev,"nr-timers" ,2 ); t->timers =qemu_mallocz (sizeof t->timers[0 ] * t->nr_timers);for (i =0 ; i < t->nr_timers; i++) {struct xlx_timer *xt = &t->timers[i];
@@ -208,17 +207,36 @@ static void xilinx_timer_init(SysBusDevice *dev) xt->nr = i; xt->bh =qemu_bh_new (timer_hit, xt); xt->ptimer =ptimer_init (xt->bh); -ptimer_set_freq (xt->ptimer, freq_hz); +ptimer_set_freq (xt->ptimer, t->freq_hz); } timer_regs =cpu_register_io_memory (timer_read, timer_write, t);sysbus_init_mmio (dev,R_MAX *4 * t->nr_timers, timer_regs); } +static SysBusDeviceInfo xilinx_timer_info = { + .init = xilinx_timer_init, + .qdev.name ="xilinx,timer" , + .qdev.size =sizeof (struct timerblock ), + .qdev.props = (Property []) { + { + .name ="frequency" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct timerblock , freq_hz), + .defval = (uint32_t []) {2 }, + },{ + .name ="nr-timers" , + .info = &qdev_prop_uint32, + .offset = offsetof(struct timerblock , nr_timers), + .defval = (uint32_t []) {2 }, + }, + {/* end of list */ } + } +}; +static void xilinx_timer_register (void ) { -sysbus_register_dev ("xilinx,timer" ,sizeof (struct timerblock ), - xilinx_timer_init); +sysbus_register_withprop (&xilinx_timer_info); }device_init (xilinx_timer_register)
Signature · 1 line
1.6.2.5
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]
hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@
Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
Quoted 246 lines
hw/qdev-properties.c new file +246
-0+#include "qdev.h" + +void *qdev_get_prop_ptr (DeviceState *dev,Property *prop) +{ +void *ptr = dev; + ptr += prop->offset; +return ptr; +} + +/* --- 16bit integer --- */ + +static int parse_uint16 (DeviceState *dev,Property *prop,const char *str) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx16 :"%" PRIu16; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint16 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu16, *ptr); +} + +PropertyInfo qdev_prop_uint16 = { + .name ="uint16" , + .type =PROP_TYPE_UINT16 , + .size =sizeof (uint16_t ), + .parse = parse_uint16, + .print = print_uint16, +}; + +/* --- 32bit integer --- */ + +static int parse_uint32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx32 :"%" PRIu32; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu32, *ptr); +} + +PropertyInfo qdev_prop_uint32 = { + .name ="uint32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_uint32, + .print = print_uint32, +}; + +/* --- 32bit hex value --- */ + +static int parse_hex32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); + +if (sscanf (str,"%" PRIx32, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_hex32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"0x%" PRIx32, *ptr); +} + +PropertyInfo qdev_prop_hex32 = { + .name ="hex32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_hex32, + .print = print_hex32, +}; + +/* --- pointer --- */ + +static int print_ptr (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +void **ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"<%p>" , *ptr); +} + +PropertyInfo qdev_prop_ptr = { + .name ="ptr" , + .type =PROP_TYPE_PTR , + .size =sizeof (void *), + .print = print_ptr, +}; + +/* --- mac address --- */ + +/* +* accepted syntax versions: +* 01:02:03:04:05:06 +* 01-02-03-04-05-06 +*/ +static int parse_mac (DeviceState *dev,Property *prop,const char *str) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +int i, pos; +char *p; + +for (i =0 , pos =0 ; i <6 ; i++, pos +=3 ) { +if (!isxdigit (str[pos])) +return -1 ; +if (!isxdigit (str[pos+1 ])) +return -1 ; +if (i ==5 && str[pos+2 ] !='\0' ) +return -1 ; +if (str[pos+2 ] !=':' && str[pos+2 ] !='-' ) +return -1 ; + mac[i] =strtol (str+pos, &p,16 ); + } +return 0 ; +} + +static int print_mac (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%02x:%02x:%02x:%02x:%02x:%02x" , + mac[0 ], mac[1 ], mac[2 ], mac[3 ], mac[4 ], mac[5 ]); +} + +PropertyInfo qdev_prop_macaddr = { + .name ="mac-addr" , + .type =PROP_TYPE_MACADDR , + .size =6 , + .parse = parse_mac, + .print = print_mac, +}; + +/* --- public helpers --- */ + +static Property *qdev_prop_walk (Property *props,const char *name) +{ +if (!props) +return NULL ; +while (props->name) { +if (strcmp (props->name, name) ==0 ) +return props; + props++; + } +return NULL ; +} + +static Property *qdev_prop_find (DeviceState *dev,const char *name) +{ +Property *prop; + +/* device properties */ + prop =qdev_prop_walk (dev->info->props, name); +if (prop) +return prop; + +/* bus properties */ + prop =qdev_prop_walk (dev->parent_bus->info->props, name); +if (prop) +return prop; + +return NULL ; +} + +int qdev_prop_parse (DeviceState *dev,const char *name,const char *value) +{ +Property *prop; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"property \"%s.%s\" not found\n" , + dev->info->name, name); +return -1 ; + } +if (!prop->info->parse) { +fprintf (stderr,"property \"%s.%s\" has no parser\n" , + dev->info->name, name); +return -1 ; + } +return prop->info->parse (dev, prop, value); +} + +void qdev_prop_set (DeviceState *dev,const char *name,void *src,enum PropertyType type) +{ +Property *prop; +void *dst; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"%s: property \"%s.%s\" not found\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } +if (prop->info->type != type) { +fprintf (stderr,"%s: property \"%s.%s\" type mismatch\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } + dst =qdev_get_prop_ptr (dev, prop); +memcpy (dst, src, prop->info->size); +} + +void qdev_prop_set_uint16 (DeviceState *dev,const char *name,uint16_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT16 ); +} + +void qdev_prop_set_uint32 (DeviceState *dev,const char *name,uint32_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT32 ); +} + +void qdev_prop_set_ptr (DeviceState *dev,const char *name,void *value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_PTR ); +} + +void qdev_prop_set_defaults (DeviceState *dev,Property *props) +{ +char *dst; + +if (!props) +return ; +while (props->name) { +if (props->defval) { + dst =qdev_get_prop_ptr (dev, props); +memcpy (dst, props->defval, props->info->size); + } + props++; + } +} +
Signature · 1 line
Eduardo
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
Quoted 13 lines · Gerd Hoffmann
[...]
hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I prefer and assumed GPL2+ because that is kind of standard for many files of QEMU, but would not mind any other free licenses like LGPL2+, BSD or Public Domain for hw/qdev-properties.c
Regards
Stefan Weil
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
Quoted 13 lines · Stefan Weil
Quoted 13 lines · Gerd Hoffmann
[...]
hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 7 lines
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I prefer and assumed GPL2+ because that is kind of standard for many files of QEMU, but would not mind any other free licenses like LGPL2+, BSD or Public Domain for
hw/qdev-properties.c
I suppose that's the usual assumption when the file doesn't have an explicit license, as it's the license specified on the LICENSE file.
The only problem is that the LICENSE file doesn't specify the GPL version, so it's a bit complicated. Some opinions can be found here:
<http://article.gmane.org/gmane.comp.emulators.qemu/122665>.
Unless every single author replies and accepts the adoption of another license (which I find very unlikely), I plan to submit a patch adding a GPLv2+ license header.
Signature · 1 line
Eduardo
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
Il 17/10/2012 23:50, Eduardo Habkost ha scritto:
Quoted 10 lines
I suppose that's the usual assumption when the file doesn't have an explicit license, as it's the license specified on the LICENSE file.
The only problem is that the LICENSE file doesn't specify the GPL version, so it's a bit complicated. Some opinions can be found here:
<http://article.gmane.org/gmane.comp.emulators.qemu/122665>.Unless every single author replies and accepts the adoption of another license (which I find very unlikely), I plan to submit a patch adding a GPLv2+ license header.
GPLv2+ should be the default license for files without a heading, except if the history of the file shows that the code came originally from the Linux kernel or another GPLv2-only project/file.
Paolo
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
gplv2+
cheers,
Gerd
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I assumed GPLv2+.
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
Under the license the original author considered for this file. If that is unclear, GPLv2.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT RTC ITP SDP-DE Corporate Competence Center Embedded Linux
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
Quoted 14 lines · Jan Kiszka
Quoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 6 lines
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
Under the license the original author considered for this file. If that is unclear, GPLv2.
For what it's worth, the original author is kraxel, and he just said he intended GPLv2+.
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
GPLv2+
In fact, I like to protect my work with
* Contributions after <today> are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
whenever I make major changes to files with weaker licenses, unless there are specific reasons to stick to the weak license.
Too bad I didn't pay attention when I worked actively on this one.
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
GPLv2+
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I can't remember what I assumed, but I'm fine with GPLv2+.
Furthermore, in my opinion, my changes were either trivial (446333cd5b5c985f6517dee7004e542ecacd21c, 73538c31a8f2d5aba3d82d8e60dadcb40d59061b, bc19fcaa1b6d2a89b96793c7e8890978fc477f51) or copied heavily from other existing code (5a053d1f2e75e6a87c483bb3ff5cc6cdf29e1569) so I think that my consent should not be required in case Gerd and others want to relicense in the future.
Quoted 252 lines
Quoted 239 lines
hw/qdev-properties.c new file +236
-0+#include "qdev.h" + +void *qdev_get_prop_ptr (DeviceState *dev,Property *prop) +{ +void *ptr = dev; + ptr += prop->offset; +return ptr; +} + +/* --- 16bit integer --- */ + +static int parse_uint16 (DeviceState *dev,Property *prop,const char *str) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx16 :"%" PRIu16; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint16 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu16, *ptr); +} + +PropertyInfo qdev_prop_uint16 = { + .name ="uint16" , + .type =PROP_TYPE_UINT16 , + .size =sizeof (uint16_t ), + .parse = parse_uint16, + .print = print_uint16, +}; + +/* --- 32bit integer --- */ + +static int parse_uint32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx32 :"%" PRIu32; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu32, *ptr); +} + +PropertyInfo qdev_prop_uint32 = { + .name ="uint32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_uint32, + .print = print_uint32, +}; + +/* --- 32bit hex value --- */ + +static int parse_hex32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); + +if (sscanf (str,"%" PRIx32, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_hex32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"0x%" PRIx32, *ptr); +} + +PropertyInfo qdev_prop_hex32 = { + .name ="hex32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_hex32, + .print = print_hex32, +}; + +/* --- pointer --- */ + +static int print_ptr (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +void **ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"<%p>" , *ptr); +} + +PropertyInfo qdev_prop_ptr = { + .name ="ptr" , + .type =PROP_TYPE_PTR , + .size =sizeof (void *), + .print = print_ptr, +}; + +/* --- mac address --- */ + +/* +* accepted syntax versions: +* 01:02:03:04:05:06 +* 01-02-03-04-05-06 +*/ +static int parse_mac (DeviceState *dev,Property *prop,const char *str) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +int i, pos; +char *p; + +for (i =0 , pos =0 ; i <6 ; i++, pos +=3 ) { +if (!isxdigit (str[pos])) +return -1 ; +if (!isxdigit (str[pos+1 ])) +return -1 ; +if (i ==5 && str[pos+2 ] !='\0' ) +return -1 ; +if (str[pos+2 ] !=':' && str[pos+2 ] !='-' ) +return -1 ; + mac[i] =strtol (str+pos, &p,16 ); + } +return 0 ; +} + +static int print_mac (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%02x:%02x:%02x:%02x:%02x:%02x" , + mac[0 ], mac[1 ], mac[2 ], mac[3 ], mac[4 ], mac[5 ]); +} + +PropertyInfo qdev_prop_macaddr = { + .name ="mac-addr" , + .type =PROP_TYPE_MACADDR , + .size =6 , + .parse = parse_mac, + .print = print_mac, +}; + +/* --- public helpers --- */ + +static Property *qdev_prop_walk (Property *props,const char *name) +{ +if (!props) +return NULL ; +while (props->name) { +if (strcmp (props->name, name) ==0 ) +return props; + props++; + } +return NULL ; +} + +static Property *qdev_prop_find (DeviceState *dev,const char *name) +{ +Property *prop; + +/* device properties */ + prop =qdev_prop_walk (dev->info->props, name); +if (prop) +return prop; + +/* bus properties */ + prop =qdev_prop_walk (dev->parent_bus->info->props, name); +if (prop) +return prop; + +return NULL ; +} + +int qdev_prop_parse (DeviceState *dev,const char *name,const char *value) +{ +Property *prop; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"property \"%s.%s\" not found\n" , + dev->info->name, name); +return -1 ; + } +if (!prop->info->parse) { +fprintf (stderr,"property \"%s.%s\" has no parser\n" , + dev->info->name, name); +return -1 ; + } +return prop->info->parse (dev, prop, value); +} + +void qdev_prop_set (DeviceState *dev,const char *name,void *src,enum PropertyType type) +{ +Property *prop; +void *dst; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"%s: property \"%s.%s\" not found\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } +if (prop->info->type != type) { +fprintf (stderr,"%s: property \"%s.%s\" type mismatch\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } + dst =qdev_get_prop_ptr (dev, prop); +memcpy (dst, src, prop->info->size); +} + +void qdev_prop_set_uint16 (DeviceState *dev,const char *name,uint16_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT16 ); +} + +void qdev_prop_set_uint32 (DeviceState *dev,const char *name,uint32_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT32 ); +} + +void qdev_prop_set_ptr (DeviceState *dev,const char *name,void *value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_PTR ); +} + +void qdev_prop_set_defaults (DeviceState *dev,Property *props) +{ +char *dst; + +if (!props)hw/qdev-properties.c line 246
Quoted 10 lines
hw/qdev-properties.c new file +10
-0+return ; +while (props->name) { +if (props->defval) { + dst =qdev_get_prop_ptr (dev, props); +memcpy (dst, props->defval, props->info->size); + } + props++; + } +} +--
Eduardo
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
Quoted 20 lines · Blue Swirl
Quoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I can't remember what I assumed, but I'm fine with GPLv2+.
Quoted 8 lines
Furthermore, in my opinion, my changes were either trivial (
446333cd5b5c985f6517dee7004e542ecacd21c,73538c31a8f2d5aba3d82d8e60dadcb40d59061b,bc19fcaa1b6d2a89b96793c7e8890978fc477f51) or copied heavily from other existing code (5a053d1f2e75e6a87c483bb3ff5cc6cdf29e1569) so I think that my consent should not be required in case Gerd and others want to relicense in the future.
Same goes for me (c08fb2ac)
Quoted 253 lines
Quoted 252 lines
Quoted 239 lines
hw/qdev-properties.c new file +236
-0+#include "qdev.h" + +void *qdev_get_prop_ptr (DeviceState *dev,Property *prop) +{ +void *ptr = dev; + ptr += prop->offset; +return ptr; +} + +/* --- 16bit integer --- */ + +static int parse_uint16 (DeviceState *dev,Property *prop,const char *str) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx16 :"%" PRIu16; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint16 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint16_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu16, *ptr); +} + +PropertyInfo qdev_prop_uint16 = { + .name ="uint16" , + .type =PROP_TYPE_UINT16 , + .size =sizeof (uint16_t ), + .parse = parse_uint16, + .print = print_uint16, +}; + +/* --- 32bit integer --- */ + +static int parse_uint32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +const char *fmt; + +/* accept both hex and decimal */ + fmt =strncasecmp (str,"0x" ,2 ) ==0 ?"%" PRIx32 :"%" PRIu32; +if (sscanf (str, fmt, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_uint32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%" PRIu32, *ptr); +} + +PropertyInfo qdev_prop_uint32 = { + .name ="uint32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_uint32, + .print = print_uint32, +}; + +/* --- 32bit hex value --- */ + +static int parse_hex32 (DeviceState *dev,Property *prop,const char *str) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); + +if (sscanf (str,"%" PRIx32, ptr) !=1 ) +return -1 ; +return 0 ; +} + +static int print_hex32 (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint32_t *ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"0x%" PRIx32, *ptr); +} + +PropertyInfo qdev_prop_hex32 = { + .name ="hex32" , + .type =PROP_TYPE_UINT32 , + .size =sizeof (uint32_t ), + .parse = parse_hex32, + .print = print_hex32, +}; + +/* --- pointer --- */ + +static int print_ptr (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +void **ptr =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"<%p>" , *ptr); +} + +PropertyInfo qdev_prop_ptr = { + .name ="ptr" , + .type =PROP_TYPE_PTR , + .size =sizeof (void *), + .print = print_ptr, +}; + +/* --- mac address --- */ + +/* +* accepted syntax versions: +* 01:02:03:04:05:06 +* 01-02-03-04-05-06 +*/ +static int parse_mac (DeviceState *dev,Property *prop,const char *str) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +int i, pos; +char *p; + +for (i =0 , pos =0 ; i <6 ; i++, pos +=3 ) { +if (!isxdigit (str[pos])) +return -1 ; +if (!isxdigit (str[pos+1 ])) +return -1 ; +if (i ==5 && str[pos+2 ] !='\0' ) +return -1 ; +if (str[pos+2 ] !=':' && str[pos+2 ] !='-' ) +return -1 ; + mac[i] =strtol (str+pos, &p,16 ); + } +return 0 ; +} + +static int print_mac (DeviceState *dev,Property *prop,char *dest,size_t len) +{ +uint8_t *mac =qdev_get_prop_ptr (dev, prop); +return snprintf (dest, len,"%02x:%02x:%02x:%02x:%02x:%02x" , + mac[0 ], mac[1 ], mac[2 ], mac[3 ], mac[4 ], mac[5 ]); +} + +PropertyInfo qdev_prop_macaddr = { + .name ="mac-addr" , + .type =PROP_TYPE_MACADDR , + .size =6 , + .parse = parse_mac, + .print = print_mac, +}; + +/* --- public helpers --- */ + +static Property *qdev_prop_walk (Property *props,const char *name) +{ +if (!props) +return NULL ; +while (props->name) { +if (strcmp (props->name, name) ==0 ) +return props; + props++; + } +return NULL ; +} + +static Property *qdev_prop_find (DeviceState *dev,const char *name) +{ +Property *prop; + +/* device properties */ + prop =qdev_prop_walk (dev->info->props, name); +if (prop) +return prop; + +/* bus properties */ + prop =qdev_prop_walk (dev->parent_bus->info->props, name); +if (prop) +return prop; + +return NULL ; +} + +int qdev_prop_parse (DeviceState *dev,const char *name,const char *value) +{ +Property *prop; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"property \"%s.%s\" not found\n" , + dev->info->name, name); +return -1 ; + } +if (!prop->info->parse) { +fprintf (stderr,"property \"%s.%s\" has no parser\n" , + dev->info->name, name); +return -1 ; + } +return prop->info->parse (dev, prop, value); +} + +void qdev_prop_set (DeviceState *dev,const char *name,void *src,enum PropertyType type) +{ +Property *prop; +void *dst; + + prop =qdev_prop_find (dev, name); +if (!prop) { +fprintf (stderr,"%s: property \"%s.%s\" not found\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } +if (prop->info->type != type) { +fprintf (stderr,"%s: property \"%s.%s\" type mismatch\n" , + __FUNCTION__, dev->info->name, name); +abort (); + } + dst =qdev_get_prop_ptr (dev, prop); +memcpy (dst, src, prop->info->size); +} + +void qdev_prop_set_uint16 (DeviceState *dev,const char *name,uint16_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT16 ); +} + +void qdev_prop_set_uint32 (DeviceState *dev,const char *name,uint32_t value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_UINT32 ); +} + +void qdev_prop_set_ptr (DeviceState *dev,const char *name,void *value) +{ +qdev_prop_set (dev, name, &value,PROP_TYPE_PTR ); +} + +void qdev_prop_set_defaults (DeviceState *dev,Property *props) +{ +char *dst; + +if (!props)hw/qdev-properties.c line 246
Quoted 10 lines
hw/qdev-properties.c new file +10
-0+return ; +while (props->name) { +if (props->defval) { + dst =qdev_get_prop_ptr (dev, props); +memcpy (dst, props->defval, props->info->size); + } + props++; + } +} +--
Eduardo
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
GPLv2+
Amit
Re: [Qemu-devel] [PATCH 1/6] qdev: rework device properties.
In reply to Eduardo HabkostQuoted 13 lines · Eduardo Habkost
On Wed, Jul 15, 2009 at 01:43:31PM +0200, Gerd Hoffmann wrote:
[...]hw/qdev-properties.c
Quoted 6 lines
hw/qdev-properties.c new file +0
-0@@ -0,0 +1,246 @@Gerd, could you clarify what's the copyright/license of this file? (I mean, at least the copyright/license of the initial version of the file you wrote, below).
Quoted 3 lines
I am CCing all other authors that touched the file (according to git logs), so they can clarify what's the license they assumed for the file and their contributions.
I'm fine with GPLv2+.
Signature · 1 line
yamahata
PATCH 2/6 qdev: factor out driver search to qdev_find_info()
In reply to Gerd Hoffmann--- hw/qdev.c | 22 +++++++++++++++------- 1 files changed, 15 insertions(+), 7 deletions(-)
hw/qdev.c +15 -7
@@ -47,6 +47,20 @@ void qdev_register(DeviceInfo *info) device_info_list = info; } +static DeviceInfo *qdev_find_info (BusInfo *bus_info,const char *name) +{ +DeviceInfo *info; + +for (info = device_info_list; info !=NULL ; info = info->next) { +if (bus_info && info->bus_info != bus_info) +continue ; +if (strcmp (info->name, name) !=0 ) +continue ; +return info; + } +return NULL ; +} +/* Create a new device. This only initializes the device state structure and allows properties to be set. qdev_init should be called to initialize the actual device emulation. */
@@ -62,13 +76,7 @@ DeviceState *qdev_create(BusState *bus, const char *name) bus = main_system_bus; } -for (info = device_info_list; info !=NULL ; info = info->next) { -if (info->bus_info != bus->info) -continue ; -if (strcmp (info->name, name) !=0 ) -continue ; -break ; - } + info =qdev_find_info (bus->info, name);if (!info) {hw_error ("Unknown device '%s' for bus '%s'\n" , name, bus->info->name); }
Signature · 1 line
1.6.2.5
PATCH 3/6 qdev: add no_user, alias and desc
In reply to Gerd Hoffmannno_user: prevent users from adding certain devices.
desc: description of the device.
alias: to allow user friendly shortcuts on the command line, i.e.
-device usbmouse instead of -device "QEMU USB Mouse" or -device lsi instead of -device lsi53c895a
--- hw/qdev.c | 12 ++++++++++++ hw/qdev.h | 3 +++ 2 files changed, 15 insertions(+), 0 deletions(-)
hw/qdev.c +12 -0
@@ -51,6 +51,7 @@ static DeviceInfo *qdev_find_info(BusInfo *bus_info, const char *name) {DeviceInfo *info; +/* first check device names */ for (info = device_info_list; info !=NULL ; info = info->next) {if (bus_info && info->bus_info != bus_info)continue ;
@@ -58,6 +59,17 @@ static DeviceInfo *qdev_find_info(BusInfo *bus_info, const char *name)continue ;return info; } + +/* failing that check the aliases */ +for (info = device_info_list; info !=NULL ; info = info->next) { +if (bus_info && info->bus_info != bus_info) +continue ; +if (!info->alias) +continue ; +if (strcmp (info->alias, name) !=0 ) +continue ; +return info; + }return NULL ; }
hw/qdev.h +3 -0
@@ -87,8 +87,11 @@ typedef void (*SCSIAttachFn)(DeviceState *host, BlockDriverState *bdrv,struct DeviceInfo {const char *name; +const char *alias; +const char *desc;size_t size;Property *props; +int no_user;/* Private to qdev / bus. */ qdev_initfn init;
Signature · 1 line
1.6.2.5
PATCH 4/6 qdev: add user-specified identifier to devices.
In reply to Gerd HoffmannAdd id field to DeviceState. Make "info qtree" print it.
This helps users and management apps identifying devices in monitor output, which is especially useful with otherwise identical devices such as two virtio disks.
This patch doesn't add a way to set the id, followup patches will do.
--- hw/qdev.c | 6 ++++-- hw/qdev.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-)
hw/qdev.c +4 -2
@@ -114,7 +114,8 @@ void qdev_init(DeviceState *dev)void qdev_free (DeviceState *dev) {LIST_REMOVE (dev, sibling); -free (dev); +qemu_free (dev->id); +qemu_free (dev); }/* Get a character (serial) device interface. */
@@ -266,7 +267,8 @@ static void qdev_print_props(Monitor *mon, DeviceState *dev, Property *props,static void qdev_print (Monitor *mon,DeviceState *dev,int indent) {BusState *child; -qdev_printf ("dev: %s\n" , dev->info->name); +qdev_printf ("dev: %s, id \"%s\"\n" , dev->info->name, + dev->id ? dev->id :"" ); indent +=2 ;if (dev->num_gpio_in) {qdev_printf ("gpio-in %d\n" , dev->num_gpio_in);
hw/qdev.h +1 -0
@@ -17,6 +17,7 @@ typedef struct BusInfo BusInfo;/* This structure should not be accessed directly. We declare it here so that it can be embedded in individual device state structures. */ struct DeviceState { +char *id;DeviceInfo *info;BusState *parent_bus;int num_gpio_out;
Signature · 1 line
1.6.2.5
PATCH 5/6 qdev: add id= support for pci nics.
In reply to Gerd Hoffmann--- hw/pci.c | 2 ++ net.c | 5 ++++- net.h | 1 + 3 files changed, 7 insertions(+), 1 deletions(-)
hw/pci.c +2 -0
@@ -821,6 +821,8 @@ PCIDevice *pci_nic_init(NICInfo *nd, const char *default_model,if (strcmp (nd->model, pci_nic_models[i]) ==0 ) { pci_dev =pci_create (pci_nic_names[i], devaddr); dev = &pci_dev->qdev; +if (nd->id) + dev->id =qemu_strdup (nd->id); dev->nd = nd;qdev_init (dev); nd->private = dev;
net.c +4 -1
@@ -2428,7 +2428,7 @@ int net_client_init(Monitor *mon, const char *device, const char *p) }if (!strcmp (device,"nic" )) {static const char *const nic_params[] = { -"vlan" ,"name" ,"macaddr" ,"model" ,"addr" ,"vectors" ,NULL +"vlan" ,"name" ,"macaddr" ,"model" ,"addr" ,"id" ,"vectors" ,NULL };NICInfo *nd;uint8_t *macaddr;
@@ -2466,6 +2466,9 @@ int net_client_init(Monitor *mon, const char *device, const char *p)if (get_param_value (buf,sizeof (buf),"addr" , p)) { nd->devaddr =strdup (buf); } +if (get_param_value (buf,sizeof (buf),"id" , p)) { + nd->id =strdup (buf); + } nd->nvectors =NIC_NVECTORS_UNSPECIFIED ;if (get_param_value (buf,sizeof (buf),"vectors" , p)) {char *endptr;
net.h +1 -0
@@ -95,6 +95,7 @@ struct NICInfo {const char *model;const char *name;const char *devaddr; +const char *id;VLANState *vlan;VLANClientState *vc;void *private;
Signature · 1 line
1.6.2.5
PATCH 6/6 qdev: print device id in "info pci".
In reply to Gerd Hoffmann--- hw/pci.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
hw/pci.c +1 -0
@@ -737,6 +737,7 @@ static void pci_info_device(PCIDevice *d) } } } +monitor_printf (mon," id \"%s\"\n" , d->qdev.id ? d->qdev.id :"" );if (class ==0x0604 && d->config[0x19 ] !=0 ) {pci_for_each_device (d->config[0x19 ], pci_info_device); }
Signature · 1 line
1.6.2.5