Skip to contentSkip to conversation

ARM: at91: dt: evk-pro3: enable uart0 and uart2

PATCH New Fabio Porcedda 2 participants 3 messages Oct 23, 2012 – Oct 24, 2012 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: at91: dt: evk-pro3: enable uart0 and uart2

---
 arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/evk-pro3.dts +8 -0
index ce959ee..96e50f5 100644
@@ -22,6 +22,14 @@
 				status = "okay";
 			};
 
+			usart0: serial at fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial at fffb8000 {
+				status = "okay";
+			};
+
 			usb1: gadget at fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
Signature · 1 line
1.7.11.3
#1 lore raw

PATCH 1/1 ARM: at91: dt: evk-pro3: enable uart0 and uart2

Hi,

You will have to wait a few I prepare a patch series for pinctrl

so most of the current drivers will support pinctrl and requere it

this will availabe rc3 or rc4 max

then I will merge more update and boards

Best Regards,
J.

Quoted 27 lines · Fabio Porcedda
---
 arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/evk-pro3.dts +8 -0
index ce959ee..96e50f5 100644
@@ -22,6 +22,14 @@
 				status = "okay";
 			};
 
+			usart0: serial at fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial at fffb8000 {
+				status = "okay";
+			};
+
 			usb1: gadget at fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
Signature · 1 line
1.7.11.3
#2 lore raw

PATCH 1/1 ARM: at91: dt: evk-pro3: enable uart0 and uart2

Quoted 9 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi,

You will have to wait a few I prepare a patch series for pinctrl

so most of the current drivers will support pinctrl and requere it

this will availabe rc3 or rc4 max

then I will merge more update and boards

Ok, i will wait.

Best regards

Signature · 1 line
Fabio Porcedda