netatalk: bump version
PATCH 1/1 netatalk: bump version
Netatalk goes to version 3.0.
The startup script has changed too, there is now only one binary called netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.
All the config is done within /etc/afp.conf, look at :
http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
for more info about the upgrade process.
--- package/netatalk/S50netatalk | 32 +++++++++++--------------------- package/netatalk/netatalk.mk | 4 ++-- 2 files changed, 13 insertions(+), 23 deletions(-)
package/netatalk/S50netatalk +11 -21
@@ -1,40 +1,30 @@ -#!/bin/sh -# -# Start netatalk daemon (aftpd && cnid_metad) +#!/bin/sh +# +# Start netatalk # - -AFPD_UAMLIST="-U uams_dhx2.so,uams_clrtxt.so" start() { - echo -n "Starting Netatalk services (this will take a while): " - echo "Starting afpd" - echo -n " afpd" - start-stop-daemon -S -q -p /var/run/afpd.pid --exec /usr/sbin/afpd -- $AFPD_UAMLIST -g nobody -c 50 - echo -n " cnid_metad" - start-stop-daemon -S -q -p /var/run/cnid_metad.pid --exec /usr/sbin/cnid_metad -- -l log_note - echo "." + echo "Starting Netatalk" + start-stop-daemon -S -q -p /var/run/netatalk.pid --exec /usr/sbin/netatalk } stop(){ - echo -n "Stopping Netatalk Daemons:" - echo -n " afpd" - start-stop-daemon -K -q -p /var/run/afpd.pid - echo -n " cnid_metad" - start-stop-daemon -K -q -p /var/run/cnid_metad.pid + echo "Stopping Netatalk" + start-stop-daemon -K -q -p /var/run/netatalk.pid } case "$1" in start) start - ;; + ;; stop) stop - ;; + ;; restart) start stop - ;; - *) + ;; + *) echo $"Usage: $0 {start|stop|restart}" exit 1 esac
package/netatalk/netatalk.mk +2 -2
@@ -3,8 +3,8 @@ # netatalk # ############################################################# -NETATALK_VERSION = 2.2.2 -NETATALK_SITE = http://downloads.sourceforge.net/project/netatalk/netatalk/$(NETATALK_VERSION)/ +NETATALK_VERSION = 3.0 +NETATALK_SITE = http://downloads.sourceforge.net/project/netatalk/netatalk/$(NETATALK_VERSION) NETATALK_SOURCE = netatalk-$(NETATALK_VERSION).tar.bz2 NETATALK_DEPENDENCIES = openssl berkeleydb libgcrypt libgpg-error
Signature · 1 line
1.7.10.4
PATCH 1/1 netatalk: bump version
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Maxime" == Maxime Hadjinlian <[email protected]> writes:
Maxime> Netatalk goes to version 3.0.
Maxime> The startup script has changed too, there is now only one binary called Maxime> netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.
Maxime> All the config is done within /etc/afp.conf, look at :
Maxime> http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
Maxime> for more info about the upgrade process.
I did a quick test build here:
CC afpd-switch.o
status.c:38:18: fatal error: krb5.h: No such file or directory
compilation terminated.
make[4]: *** [afpd-status.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `/home/peko/source/buildroot/output/build/netatalk-3.0/etc/afpd'
We don't have kerberos in buildroot, so I added --without-kerberos and committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 netatalk: bump version
In reply to Maxime HadjinlianDear Maxime Hadjinlian,
Quoted 11 lines · Maxime Hadjinlian
Netatalk goes to version 3.0.
The startup script has changed too, there is now only one binary called netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.All the config is done within
/etc/afp.conf, look at :
http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
for more info about the upgrade process.--- package/netatalk/S50netatalk | 32 +++++++++++--------------------- package/netatalk/netatalk.mk | 4 ++-- 2 files changed, 13 insertions(+), 23 deletions(-)
This update is apparently breaking the build in certain configurations:
http://autobuild.buildroot.net/results/4fada48332abc7f9bcd49a70debbc7950bc2263a/build-end.log
I see that your package as a dependency on berkeyleydb, but somehow, the configure script fails to find it.
Can you look into it?
See
http://autobuild.buildroot.net/results/4fada48332abc7f9bcd49a70debbc7950bc2263a/
for the full configuration files.
Thanks,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 netatalk: bump version
Quoted 1 line · Thomas Petazzoni
Dear Maxime Hadjinlian,
Hi Thomas,
Quoted 14 lines · Maxime Hadjinlian
Quoted 11 lines
Netatalk goes to version 3.0.
The startup script has changed too, there is now only one binary called netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.All the config is done within
/etc/afp.conf, look at :
http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
for more info about the upgrade process.--- package/netatalk/S50netatalk | 32 +++++++++++--------------------- package/netatalk/netatalk.mk | 4 ++-- 2 files changed, 13 insertions(+), 23 deletions(-)
Quoted 7 lines
This update is apparently breaking the build in certain configurations:
http://autobuild.buildroot.net/results/4fada48332abc7f9bcd49a70debbc7950bc2263a/build-end.logI see that your package as a dependency on berkeyleydb, but somehow, the configure script fails to find it.
Can you look into it?
I will !
Quoted 4 lines
See
http://autobuild.buildroot.net/results/4fada48332abc7f9bcd49a70debbc7950bc2263a/
for the full configuration files.
Thanks
Quoted 9 lines
Thanks,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com