Skip to contentSkip to conversation

ARM: mvebu: Add support I2C controller

PATCH New Nobuhiro Iwamatsu 2 participants 4 messages Oct 30, 2012 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ARM: mvebu: Add support I2C controller

The mvebu arch has the same I2C controller as mv64xxx-i2c. This support mv64xxx-i2c on mvebu.

---
 arch/arm/boot/dts/armada-370-xp.dtsi |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
arch/arm/boot/dts/armada-370-xp.dtsi +23 -0
index d0ea4a6..5da85c2 100644
@@ -83,6 +83,29 @@
                                interrupts = <10>;
                                status = "disabled";
                 };
+
+
+		i2c0: i2c at d0011000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <31>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at d0011100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 };
 
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 2/3 ARM: mvebu: Add support I2C for OpenBlockS AX3

OpenBlockS AX3 uses the I2C controller on the mvebu. This validates I2C controller and clock-frequency.

---
 arch/arm/boot/dts/openblocks-ax3-4.dts |   10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/openblocks-ax3-4.dts +10 -0
index 7ef8052..c42b9a5 100644
@@ -65,5 +65,15 @@
 				   linux,default-trigger = "heartbeat";
 			};
 		};
+
+		i2c at d0011000 {
+			status = "okay";
+			clock-frequency = <400000>;
+		}; 
+
+		i2c at d0011100 {
+			status = "okay";
+			clock-frequency = <400000>;
+		}; 
 	};
 };
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 3/3 ARM: mvebu: Add support RTC for OpenBlockS AX3

In reply to Nobuhiro Iwamatsu

From: Nobuhiro Iwamatsu <[email protected]>

OpenBlockS AX3 has Seiko Instruments S-35390A as RTC controller. This validates RTC controller.

---
 arch/arm/boot/dts/openblocks-ax3-4.dts |    5 +++++
 1 file changed, 5 insertions(+)
arch/arm/boot/dts/openblocks-ax3-4.dts +5 -0
index c42b9a5..61c2f2c 100644
@@ -74,6 +74,11 @@
 		i2c at d0011100 {
 			status = "okay";
 			clock-frequency = <400000>;
+
+			s35390a: s35390a at 30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			}; 
 		}; 
 	};
 };
Signature · 1 line
1.7.10.4
#3 lore raw

PATCH 1/3 ARM: mvebu: Add support I2C controller

In reply to Nobuhiro Iwamatsu

Dear Nobuhiro Iwamatsu,

Quoted 4 lines · Nobuhiro Iwamatsu

The mvebu arch has the same I2C controller as mv64xxx-i2c. This support mv64xxx-i2c on mvebu.

Thanks, looks good to me, but we have to wait for the Armada 370/XP clock patch set to get merged before merging this.

I'll give it a test on the OpenBlocks hardware and report.

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com