Add spidev to the CFA-10049
Subsystems (3)
v2 cover Add spidev to the CFA-10049
Hi everyone,
This patchset probes spidev on the SSP3 bus where on the CFA-10049 there is a Rohm DH2228FV DAC.
It first adds the dt bindings for the spidev driver, and the proper node in the CFA-10049 device tree file.
Maxime
Changes from v1:
- Removed the linux,spidev compatible string and use the compatible strings of the devices instead.
Maxime Ripard (3):
spi: spidev: Add device tree bindings
spi: spidev: Add Rohm DH2228FV DAC compatible string
ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
arch/arm/boot/dts/imx28-cfa10049.dts | 6 ++++++ drivers/spi/spidev.c | 10 ++++++++++ 2 files changed, 16 insertions(+)
Signature · 1 line
1.7.9.5
PATCH v2 1/3 spi: spidev: Add device tree bindings
This will allow to probe spidev from device tree by adding the compatible string of each device to this array.
--- drivers/spi/spidev.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/spi/spidev.c +9 -0
@@ -31,6 +31,8 @@#include <linux/mutex.h> #include <linux/slab.h> #include <linux/compat.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/spi/spidev.h>
@@ -642,10 +644,17 @@ static int __devexit spidev_remove(struct spi_device *spi)return 0 ; } +static const struct of_device_id spidev_dt_ids[] = { + {}, +}; + +MODULE_DEVICE_TABLE (of, spidev_dt_ids); +static struct spi_driver spidev_spi_driver = { .driver = { .name ="spidev" , .owner =THIS_MODULE , + .of_match_table =of_match_ptr (spidev_dt_ids), }, .probe = spidev_probe, .remove =__devexit_p (spidev_remove),
Signature · 1 line
1.7.9.5
PATCH 1/3 spi: spidev: Add device tree bindings
Quoted 2 lines · Maxime Ripard
This will allow to probe spidev from device tree by adding the compatible string of each device to this array.
Applied, thanks.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121101/d637203f/attachment.sig>
PATCH v2 2/3 spi: spidev: Add Rohm DH2228FV DAC compatible string
In reply to Maxime RipardSince we don't have a driver for it yet, use spidev instead.
--- drivers/spi/spidev.c | 1 + 1 file changed, 1 insertion(+)
drivers/spi/spidev.c +1 -0
@@ -645,6 +645,7 @@ static int __devexit spidev_remove(struct spi_device *spi) }static const struct of_device_id spidev_dt_ids[] = { + { .compatible ="rohm,dh2228fv" }, {}, };
Signature · 1 line
1.7.9.5
PATCH 2/3 spi: spidev: Add Rohm DH2228FV DAC compatible string
Quoted 1 line · Maxime Ripard
Since we don't have a driver for it yet, use spidev instead.
Applied, thanks.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121101/595dcd7c/attachment.sig>
PATCH v2 3/3 ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
In reply to Maxime RipardThere is no driver for it yet, so it will use spidev.
--- arch/arm/boot/dts/imx28-cfa10049.dts | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/boot/dts/imx28-cfa10049.dts +6 -0
@@ -29,6 +29,7 @@ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>;
@@ -60,6 +61,11 @@ spi-max-frequency = <100000>; }; + dac0: dh2228 at 2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; }; };
Signature · 1 line
1.7.9.5
Shawn Guo
AppliedPATCH 3/3 ARM: dts: cfa10049: Add the DH2228FV DAC to the DTS
Quoted 3 lines · Maxime Ripard
There is no driver for it yet, so it will use spidev.
Signed-off-by Maxime Ripard <[email protected]>
Applied, thanks.