i2c: add algo-bit support with gpio and versatile support
Subsystems (9)
v2 cover i2c: add algo-bit support with gpio and versatile support
HI,
v2: keep return -EBUSY if the adapter is already present
the foloing patch series add the i2c algo bit support with 2 drivers that use it
- gpio
- versatile
thie also create a device for i2c bus itself
all the pedending branch are rebased on it
The following changes since commit 2d1ceaff2f905f4a2bd7e6c539e7dd3d8d8e9bef:
uimage: Fix deleting of temporary file (2012-10-30 18:39:38 +0100)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git delivery/i2c
for you to fetch changes up to 5c90416b6ffb8d4ca7c4bc6aff92578b555cb965:
i2c: add versatile support (2012-11-02 02:17:04 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
i2c: adapter: register it's own device
i2c: add i2c algo bit support
i2c: add i2c-gpio support
i2c: add versatile support
drivers/i2c/Kconfig | 1 + drivers/i2c/Makefile | 2 +- drivers/i2c/algos/Kconfig | 6 +++ drivers/i2c/algos/Makefile | 5 ++ drivers/i2c/algos/i2c-algo-bit.c | 585 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/Kconfig | 16 +++++++ drivers/i2c/busses/Makefile | 2 + drivers/i2c/busses/i2c-gpio.c | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-imx.c | 20 ++++---- drivers/i2c/busses/i2c-omap.c | 30 ++++++------ drivers/i2c/busses/i2c-versatile.c | 112 +++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c.c | 17 ++++++- include/i2c/i2c-algo-bit.h | 55 ++++++++++++++++++++++ include/i2c/i2c-gpio.h | 38 +++++++++++++++ include/i2c/i2c.h | 4 +- 15 files changed, 1042 insertions(+), 28 deletions(-) create mode 100644 drivers/i2c/algos/Kconfig create mode 100644 drivers/i2c/algos/Makefile create mode 100644 drivers/i2c/algos/i2c-algo-bit.c create mode 100644 drivers/i2c/busses/i2c-gpio.c create mode 100644 drivers/i2c/busses/i2c-versatile.c create mode 100644 include/i2c/i2c-algo-bit.h create mode 100644 include/i2c/i2c-gpio.h
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 1/4 i2c: adapter: register it's own device
so we can show the this of i2c busses
set the bus device as parent of all devices.
--- drivers/i2c/busses/i2c-imx.c | 20 ++++++++++---------- drivers/i2c/busses/i2c-omap.c | 30 +++++++++++++++--------------- drivers/i2c/i2c.c | 17 ++++++++++++++++- include/i2c/i2c.h | 2 +- 4 files changed, 42 insertions(+), 27 deletions(-)
drivers/i2c/busses/i2c-imx.c +10 -10
@@ -154,7 +154,7 @@ static int i2c_fsl_bus_busy(struct i2c_adapter *adapter, int for_busy)if (!for_busy && !(temp &I2SR_IBB ))break ;if (is_timeout (start,500 *MSECOND )) { -dev_err (adapter->dev, +dev_err (&adapter->dev,"<%s> timeout waiting for I2C bus %s\n" , __func__,for_busy ?"busy" :"not busy" );return -EIO ;
@@ -177,7 +177,7 @@ static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)break ;if (is_timeout (start,100 *MSECOND )) { -dev_err (adapter->dev,"<%s> TXR timeout\n" , __func__); +dev_err (&adapter->dev,"<%s> TXR timeout\n" , __func__);return -EIO ; } }
@@ -199,7 +199,7 @@ static int i2c_fsl_acked(struct i2c_adapter *adapter)break ;if (is_timeout (start,MSECOND )) { -dev_dbg (adapter->dev,"<%s> No ACK\n" , __func__); +dev_dbg (&adapter->dev,"<%s> No ACK\n" , __func__);return -EIO ; } }
@@ -368,9 +368,9 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl, (500000U * i2c_clk_div[i][0 ] + (i2c_clk_rate /2 ) -1 ) / (i2c_clk_rate /2 ); -dev_dbg (i2c_fsl->adapter.dev,"<%s> I2C_CLK=%d, REQ DIV=%d\n" , +dev_dbg (&i2c_fsl->adapter.dev,"<%s> I2C_CLK=%d, REQ DIV=%d\n" , __func__, i2c_clk_rate, div); -dev_dbg (i2c_fsl->adapter.dev,"<%s> IFDR[IC]=0x%x, REAL DIV=%d\n" , +dev_dbg (&i2c_fsl->adapter.dev,"<%s> IFDR[IC]=0x%x, REAL DIV=%d\n" , __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); }#endif
@@ -382,7 +382,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)int i, result;if ( !(msgs->flags &I2C_M_DATA_ONLY ) ) { -dev_dbg (adapter->dev, +dev_dbg (&adapter->dev,"<%s> write slave address: addr=0x%02x\n" , __func__, msgs->addr <<1 );
@@ -399,7 +399,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)/* write data */ for (i =0 ; i < msgs->len; i++) { -dev_dbg (adapter->dev, +dev_dbg (&adapter->dev,"<%s> write byte: B%d=0x%02X\n" , __func__, i, msgs->buf[i]);writeb (msgs->buf[i], base +FSL_I2C_I2DR );
@@ -425,7 +425,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)writeb (0x0 , base +FSL_I2C_I2SR );if ( !(msgs->flags &I2C_M_DATA_ONLY ) ) { -dev_dbg (adapter->dev, +dev_dbg (&adapter->dev,"<%s> write slave address: addr=0x%02x\n" , __func__, (msgs->addr <<1 ) |0x01 );
@@ -478,7 +478,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs) } msgs->buf[i] =readb (base +FSL_I2C_I2DR ); -dev_dbg (adapter->dev,"<%s> read byte: B%d=0x%02X\n" , +dev_dbg (&adapter->dev,"<%s> read byte: B%d=0x%02X\n" , __func__, i, msgs->buf[i]); }return 0 ;
@@ -544,7 +544,7 @@ static int __init i2c_fsl_probe(struct device_d *pdev)/* Setup i2c_fsl driver structure */ i2c_fsl->adapter.master_xfer = i2c_fsl_xfer; i2c_fsl->adapter.nr = pdev->id; - i2c_fsl->adapter.dev = pdev; + i2c_fsl->adapter.dev.parent = pdev; i2c_fsl->base =dev_request_mem_region (pdev,0 ); i2c_fsl->dfsrr =-1 ;
drivers/i2c/busses/i2c-omap.c +15 -15
@@ -318,7 +318,7 @@ static int omap_i2c_init(struct omap_i2c_struct *i2c_omap)while (!(omap_i2c_read_reg (i2c_omap,OMAP_I2C_SYSS_REG ) &SYSS_RESETDONE_MASK )) {if (is_timeout (start,MSECOND )) { -dev_warn (i2c_omap->adapter.dev,"timeout waiting " +dev_warn (&i2c_omap->adapter.dev,"timeout waiting " "for controller reset\n" );return -ETIMEDOUT ; }
@@ -453,7 +453,7 @@ static int omap_i2c_wait_for_bb(struct i2c_adapter *adapter) start =get_time_ns ();while (omap_i2c_read_reg (i2c_omap,OMAP_I2C_STAT_REG ) &OMAP_I2C_STAT_BB ) {if (is_timeout (start,MSECOND )) { -dev_warn (adapter->dev,"timeout waiting for bus ready\n" ); +dev_warn (&adapter->dev,"timeout waiting for bus ready\n" );return -ETIMEDOUT ; } }
@@ -476,9 +476,9 @@ omap_i2c_isr(struct omap_i2c_struct *dev) bits =omap_i2c_read_reg (dev,OMAP_I2C_IE_REG );while ((stat = (omap_i2c_read_reg (dev,OMAP_I2C_STAT_REG ))) & bits) { -dev_dbg (dev->adapter.dev,"IRQ (ISR = 0x%04x)\n" , stat); +dev_dbg (&dev->adapter.dev,"IRQ (ISR = 0x%04x)\n" , stat);if (count++ ==100 ) { -dev_warn (dev->adapter.dev,"Too much work in one IRQ\n" ); +dev_warn (&dev->adapter.dev,"Too much work in one IRQ\n" );break ; }
@@ -499,7 +499,7 @@ complete: OMAP_I2C_CON_STP); }if (stat &OMAP_I2C_STAT_AL ) { -dev_err (dev->adapter.dev,"Arbitration lost\n" ); +dev_err (&dev->adapter.dev,"Arbitration lost\n" ); err |=OMAP_I2C_STAT_AL ; } if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
@@ -536,11 +536,11 @@ complete: } }else {if (stat &OMAP_I2C_STAT_RRDY ) -dev_err (dev->adapter.dev, +dev_err (&dev->adapter.dev,"RRDY IRQ while no data" " requested\n" );if (stat &OMAP_I2C_STAT_RDR ) -dev_err (dev->adapter.dev, +dev_err (&dev->adapter.dev,"RDR IRQ while no data" " requested\n" );break ;
@@ -577,11 +577,11 @@ complete: } }else {if (stat &OMAP_I2C_STAT_XRDY ) -dev_err (dev->adapter.dev, +dev_err (&dev->adapter.dev,"XRDY IRQ while no " "data to send\n" );if (stat &OMAP_I2C_STAT_XDR ) -dev_err (dev->adapter.dev, +dev_err (&dev->adapter.dev,"XDR IRQ while no " "data to send\n" );break ;
@@ -613,11 +613,11 @@ complete:continue ; }if (stat &OMAP_I2C_STAT_ROVR ) { -dev_err (dev->adapter.dev,"Receive overrun\n" ); +dev_err (&dev->adapter.dev,"Receive overrun\n" ); dev->cmd_err |=OMAP_I2C_STAT_ROVR ; }if (stat &OMAP_I2C_STAT_XUDF ) { -dev_err (dev->adapter.dev,"Transmit underflow\n" ); +dev_err (&dev->adapter.dev,"Transmit underflow\n" ); dev->cmd_err |=OMAP_I2C_STAT_XUDF ; } }
@@ -639,7 +639,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,int ret =0 ; -dev_dbg (adapter->dev,"addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n" , +dev_dbg (&adapter->dev,"addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n" , msg->addr, msg->len, msg->flags, stop);if (msg->len ==0 )
@@ -687,7 +687,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,/* Let the user know if i2c is in a bad state */ if (is_timeout (start,MSECOND )) { -dev_err (adapter->dev,"controller timed out " +dev_err (&adapter->dev,"controller timed out " "waiting for start condition to finish\n" );return -ETIMEDOUT ; }
@@ -707,7 +707,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,while (ret){ ret =omap_i2c_isr (i2c_omap);if (is_timeout (start,MSECOND )) { -dev_err (adapter->dev, +dev_err (&adapter->dev,"timed out on polling for " "open i2c message handling\n" );return -ETIMEDOUT ;
@@ -835,7 +835,7 @@ i2c_omap_probe(struct device_d *pdev) i2c_omap->adapter.master_xfer = omap_i2c_xfer, i2c_omap->adapter.nr = pdev->id; - i2c_omap->adapter.dev = pdev; + i2c_omap->adapter.dev.parent = pdev;/* i2c device drivers may be active on return from add_adapter() */ r =i2c_add_numbered_adapter (&i2c_omap->adapter);
drivers/i2c/i2c.c +16 -1
@@ -80,7 +80,7 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)*/ for (ret =0 ; ret < num; ret++) { -dev_dbg (adap->dev,"master_xfer[%d] %c, addr=0x%02x, " +dev_dbg (&adap->dev,"master_xfer[%d] %c, addr=0x%02x, " "len=%d\n" , ret, (msgs[ret].flags &I2C_M_RD ) ?'R' :'W' , msgs[ret].addr, msgs[ret].len); }
@@ -256,6 +256,9 @@ struct i2c_client *i2c_new_device(struct i2c_adapter *adapter, client->adapter = adapter; client->addr = chip->addr; + client->dev.parent = &adapter->dev; +dev_add_child (client->dev.parent, &client->dev); + status =register_device (&client->dev);#if 0
@@ -363,9 +366,21 @@ struct i2c_adapter *i2c_get_adapter(int busnum)*/ int i2c_add_numbered_adapter (struct i2c_adapter *adapter) { +int ret; +if (i2c_get_adapter (adapter->nr))return -EBUSY ; + adapter->dev.id = adapter->nr; +strcpy (adapter->dev.name,"i2c" ); + +if (adapter->dev.parent) +dev_add_child (adapter->dev.parent, &adapter->dev); + + ret =register_device (&adapter->dev); +if (ret) +return ret; +list_add_tail (&adapter->list, &adapter_list);/* populate children from any i2c device tables */
include/i2c/i2c.h +1 -1
@@ -66,7 +66,7 @@ struct i2c_msg {* */ struct i2c_adapter { -struct device_d *dev;/* ptr to device */ +struct device_d dev;/* ptr to device */ int nr;/* bus number */ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,int num);struct list_head list;
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 2/4 i2c: add i2c algo bit support
This is needed for i2c-gpio support
Based on linux 3.7-rc2
--- drivers/i2c/Kconfig | 1 + drivers/i2c/Makefile | 2 +- drivers/i2c/algos/Kconfig | 6 + drivers/i2c/algos/Makefile | 5 + drivers/i2c/algos/i2c-algo-bit.c | 585 ++++++++++++++++++++++++++++++++++++++ include/i2c/i2c-algo-bit.h | 55 ++++ include/i2c/i2c.h | 2 + 7 files changed, 655 insertions(+), 1 deletion(-) create mode 100644 drivers/i2c/algos/Kconfig create mode 100644 drivers/i2c/algos/Makefile create mode 100644 drivers/i2c/algos/i2c-algo-bit.c create mode 100644 include/i2c/i2c-algo-bit.h
drivers/i2c/Kconfig +1 -0
@@ -3,6 +3,7 @@ menuconfig I2C if I2C +source drivers/i2c/algos/Kconfig source drivers/i2c/busses/Kconfig endif
drivers/i2c/Makefile +1 -1
@@ -1 +1 @@ -obj-$(CONFIG_I2C) += i2c.o busses/ +obj-$(CONFIG_I2C) += i2c.o busses/ algos/
drivers/i2c/algos/Kconfig new file +6 -0
@@ -0,0 +1,6 @@ +# +# I2C algorithm drivers configuration +# + +config I2C_ALGOBIT + bool
drivers/i2c/algos/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# +# Makefile for the i2c algorithms +# + +obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
drivers/i2c/algos/i2c-algo-bit.c new file +585 -0
585 lines not on this page · raw message
include/i2c/i2c-algo-bit.h new file +55 -0
55 lines not on this page · raw message
include/i2c/i2c.h +2 -0
@@ -70,6 +70,8 @@ struct i2c_adapter {int nr;/* bus number */ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,int num);struct list_head list; +int retries; +void *algo_data; };
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 3/4 i2c: add i2c-gpio support
In reply to Jean-Christophe PLAGNIOL-VILLARDBased on linux 3.7-rc2
--- drivers/i2c/busses/Kconfig | 8 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-gpio.c | 177 +++++++++++++++++++++++++++++++++++++++++ include/i2c/i2c-gpio.h | 38 +++++++++ 4 files changed, 224 insertions(+) create mode 100644 drivers/i2c/busses/i2c-gpio.c create mode 100644 include/i2c/i2c-gpio.h
drivers/i2c/busses/Kconfig +8 -0
@@ -4,6 +4,14 @@ menu "I2C Hardware Bus support" +config I2C_GPIO + tristate "GPIO-based bitbanging I2C" + depends on GENERIC_GPIO + select I2C_ALGOBIT + help + This is a very simple bitbanging I2C driver utilizing the + arch-neutral GPIO API to control the SCL and SDA lines. + config I2C_IMX bool "MPC85xx/i.MX I2C Master driver" depends on (ARCH_IMX && !ARCH_IMX1) || ARCH_MPC85XX
drivers/i2c/busses/Makefile +1 -0
@@ -1,2 +1,3 @@ +obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
drivers/i2c/busses/i2c-gpio.c new file +177 -0
177 lines not on this page · raw message
include/i2c/i2c-gpio.h new file +38 -0
@@ -0,0 +1,38 @@ +/* +* i2c-gpio interface to platform code +* +* Copyright (C) 2007 Atmel Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ +#ifndef _LINUX_I2C_GPIO_H +#define _LINUX_I2C_GPIO_H + +/** +* struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio +* @sda_pin: GPIO pin ID to use for SDA +* @scl_pin: GPIO pin ID to use for SCL +* @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz +* @timeout_ms: clock stretching timeout in ms. If the slave keeps +* SCL low for longer than this, the transfer will time out. +* @sda_is_open_drain: SDA is configured as open drain, i.e. the pin +* isn't actively driven high when setting the output value high. +* gpio_get_value() must return the actual pin state even if the +* pin is configured as an output. +* @scl_is_open_drain: SCL is set up as open drain. Same requirements +* as for sda_is_open_drain apply. +* @scl_is_output_only: SCL output drivers cannot be turned off. +*/ +struct i2c_gpio_platform_data { +unsigned int sda_pin; +unsigned int scl_pin; +int udelay; +int timeout_ms; +unsigned int sda_is_open_drain:1 ; +unsigned int scl_is_open_drain:1 ; +unsigned int scl_is_output_only:1 ; +}; + +#endif /* _LINUX_I2C_GPIO_H */
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 4/4 i2c: add versatile support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- drivers/i2c/busses/Kconfig | 8 +++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-versatile.c | 112 ++++++++++++++++++++++++++++++++++++ 3 files changed, 121 insertions(+) create mode 100644 drivers/i2c/busses/i2c-versatile.c
drivers/i2c/busses/Kconfig +8 -0
@@ -20,4 +20,12 @@ config I2C_OMAP bool "OMAP I2C Master driver" depends on ARCH_OMAP +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on ARCH_VERSATILE + select I2C_ALGOBIT + help + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. + endmenu
drivers/i2c/busses/Makefile +1 -0
@@ -1,3 +1,4 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o +obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
drivers/i2c/busses/i2c-versatile.c new file +112 -0
112 lines not on this page · raw message
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
HI,
v2: keep return
-EBUSYif the adapter is already presentthe foloing patch series add the i2c algo bit support with 2 drivers that use it
- gpio
- versatilethie also create a device for i2c bus itself
all the pedending branch are rebased on it
The following changes since commit
2d1ceaff2f905f4a2bd7e6c539e7dd3d8d8e9bef:
Quoted 8 lines
uimage: Fix deleting of temporary file (2012-10-30 18:39:38 +0100)
are available in the git repository at:
git://git.jcrosoft.org/barebox.gitdelivery/i2cfor you to fetch changes up to
5c90416b6ffb8d4ca7c4bc6aff92578b555cb965:
Applied, thanks
Sascha
Quoted 41 lines
i2c: add versatile support (2012-11-02 02:17:04 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
i2c: adapter: register it's own device
i2c: add i2c algo bit support
i2c: add i2c-gpio support
i2c: add versatile supportdrivers/i2c/Kconfig | 1 + drivers/i2c/Makefile | 2 +- drivers/i2c/algos/Kconfig | 6 +++ drivers/i2c/algos/Makefile | 5 ++ drivers/i2c/algos/i2c-algo-bit.c | 585 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/Kconfig | 16 +++++++ drivers/i2c/busses/Makefile | 2 + drivers/i2c/busses/i2c-gpio.c | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-imx.c | 20 ++++---- drivers/i2c/busses/i2c-omap.c | 30 ++++++------ drivers/i2c/busses/i2c-versatile.c | 112 +++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c.c | 17 ++++++- include/i2c/i2c-algo-bit.h | 55 ++++++++++++++++++++++ include/i2c/i2c-gpio.h | 38 +++++++++++++++ include/i2c/i2c.h | 4 +- 15 files changed, 1042 insertions(+), 28 deletions(-) create mode 100644 drivers/i2c/algos/Kconfig create mode 100644 drivers/i2c/algos/Makefile create mode 100644 drivers/i2c/algos/i2c-algo-bit.c create mode 100644 drivers/i2c/busses/i2c-gpio.c create mode 100644 drivers/i2c/busses/i2c-versatile.c create mode 100644 include/i2c/i2c-algo-bit.h create mode 100644 include/i2c/i2c-gpio.hBest Regards,
J._______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox