Skip to contentSkip to conversation

iproute2: avoid errors from double-installing manpages

PATCH Applied Andreas Henriksson 2 participants 2 messages Nov 9, 2012 – Nov 12, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iproute2: avoid errors from double-installing manpages

Three manpages in man8 are listed twice in MAN8PAGES (both directly and in TARGETS) which causes the install command to spit our a couple of warnings as below and exiting with non-zero exit code....

make[3]: Entering directory `/tmp/buildd/iproute-20121001/man/man8'
install -m 0755 -d /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8
install -m 0644 ip-address.8 ip-link.8 ip-route.8 ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 ss.8 tc.8 tc-bfifo.8 tc-cbq.8 tc-cbq-details.8 tc-choke.8 tc-codel.8 tc-drr.8 tc-ematch.8 tc-fq_codel.8 tc-hfsc.8 tc-htb.8 tc-netem.8 tc-pfifo.8 tc-pfifo_fast.8 tc-prio.8 tc-red.8 tc-sfb.8 tc-sfq.8 tc-stab.8 tc-tbf.8 bridge.8 rtstat.8 ctstat.8 nstat.8 routef.8 ip-address.8 ip-addrlabel.8 ip-l2tp.8 ip-link.8 ip-maddress.8 ip-monitor.8 ip-mroute.8 ip-neighbour.8 ip-netns.8 ip-ntable.8 ip-route.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8
install: will not overwrite just-created /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-address.8' with ip-address.8'
install: will not overwrite just-created /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-link.8' with ip-link.8'
install: will not overwrite just-created /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-route.8' with ip-route.8'
make[3]: *** [install] Error 1
make[3]: Leaving directory `/tmp/buildd/iproute-20121001/man/man8'
make[2]: *** [install] Error 2
make[2]: Leaving directory `/tmp/buildd/iproute-20121001/man'

man/man8/Makefile +2 -2
index aaf1729..4bad9d6 100644
@@ -1,19 +1,19 @@
 TARGETS = ip-address.8 ip-link.8 ip-route.8
 
 MAN8PAGES = $(TARGETS) ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 ss.8 \
 	tc.8 tc-bfifo.8 tc-cbq.8 tc-cbq-details.8 tc-choke.8 tc-codel.8 \
 	tc-drr.8 tc-ematch.8 tc-fq_codel.8 tc-hfsc.8 tc-htb.8 \
 	tc-netem.8 tc-pfifo.8 tc-pfifo_fast.8 tc-prio.8 tc-red.8 \
 	tc-sfb.8 tc-sfq.8 tc-stab.8 tc-tbf.8 \
 	bridge.8 rtstat.8 ctstat.8 nstat.8 routef.8 \
-	ip-address.8 ip-addrlabel.8 ip-l2tp.8 ip-link.8 \
+	ip-addrlabel.8 ip-l2tp.8 \
 	ip-maddress.8 ip-monitor.8 ip-mroute.8 ip-neighbour.8 \
-	ip-netns.8 ip-ntable.8 ip-route.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 \
+	ip-netns.8 ip-ntable.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 \
 	ip-tcp_metrics.8
 
 all: $(TARGETS)
 
 ip-address.8: ip-address.8.in
 	sed "s|@SYSCONFDIR@|$(CONFDIR)|g" $< > $@
 
 ip-link.8: ip-link.8.in
#1 lore raw
Quoted 4 lines · On Fri, 9 Nov 2012 16:42:41 +0100 Andreas Henriksson <[email protected]> wrote:

Three manpages in man8 are listed twice in MAN8PAGES (both directly and in TARGETS) which causes the install command to spit our a couple of warnings as below and exiting with non-zero exit code....

Applied