Skip to contentSkip to conversation

cmd_mmc.c: Fix typo, "dislay" -> "display"

PATCH New Robert P. J. Day 4 participants 6 messages Nov 11, 2012 – Nov 14, 2012

lore
Share & tools
lore

Robert P. J. Day

author
#0 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

Signed-off-by Robert P. J. Day <[email protected]>

---

common/cmd_mmc.c +1 -1
index 62a1c22..4c19df7 100644
@@ -144,7 +144,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 U_BOOT_CMD(
 	mmcinfo, 1, 0, do_mmcinfo,
 	"display MMC info",
-	"- dislay info of the current MMC device"
+	"- display info of the current MMC device"
 );
 
 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#1 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

Dear Robert P. J. Day,

Quoted 17 lines · Robert P. J. Day
Signed-off-by Robert P. J. Day <[email protected]>

---

common/cmd_mmc.c +1 -1
index 62a1c22..4c19df7 100644
@@ -144,7 +144,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag,
 int argc, char * const argv[])
 U_BOOT_CMD(
 	mmcinfo, 1, 0, do_mmcinfo,
 	"display MMC info",
-	"- dislay info of the current MMC device"
+	"- display info of the current MMC device"
 );
Quoted 2 lines

static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

Thanks for fixing my typo! ;)

Cc-ing Andy (MMC custodian).

Best regards,
Beno?t

author
#2 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

On Sun, 11 Nov 2012, Beno?t Th?baudeau wrote:

... snip ...

Quoted 3 lines

Thanks for fixing my typo! ;)

Cc-ing Andy (MMC custodian).

i checked the MAINTAINERS file and didn't see an official MMC
maintainer, else i would have CCed my original post. andy fleming's name doesn't appear in that file. should it?

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#3 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

Dear Robert,

Quoted 4 lines · In message <alpine.DEB.2.02.1211110943450.23306@oneiric> you wrote:

i checked the MAINTAINERS file and didn't see an official MMC
maintainer, else i would have CCed my original post. andy fleming's name doesn't appear in that file. should it?

No. MAINTAINERS is the list of _board_ maintainers, as the header should explain ("Maintainers for U-Boot board support"). In case of sub-systems like MMC you need to look up the responsible custodian - see here: http://www.denx.de/wiki/U-Boot/Custodians

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Security is mostly a superstition. It does not  exist  in  nature...
Life is either a daring adventure or nothing."         - Helen Keller
author
#4 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

Quoted 4 lines · Wolfgang Denk

Dear Robert,

Quoted 1 line · In message <alpine.DEB.2.02.1211110943450.23306@oneiric> you wrote:
Quoted 8 lines
Quoted 3 lines

i checked the MAINTAINERS file and didn't see an official MMC
maintainer, else i would have CCed my original post. andy fleming's name doesn't appear in that file. should it?

No. MAINTAINERS is the list of _board_ maintainers, as the header should explain ("Maintainers for U-Boot board support"). In case of sub-systems like MMC you need to look up the responsible custodian - see here: http://www.denx.de/wiki/U-Boot/Custodians

ah, my mistake, apologies. too used to kernel MAINTAINERS file ...

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
Applied
#5 lore raw

PATCH 1/1 cmd_mmc.c: Fix typo, "dislay" -> "display"

In reply to Robert P. J. Day

Hi,

Quoted 10 lines · On Sun, 11 Nov 2012 08:24:44 -0500 (EST) "Robert P. J. Day"…
Signed-off-by Robert P. J. Day <[email protected]>

---

common/cmd_mmc.c +0 -0
index 62a1c22..4c19df7 100644

common/cmd_mmc.c static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) · line 150

Quoted 8 lines
common/cmd_mmc.c +1 -1
@@ -144,7 +144,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 U_BOOT_CMD(
 	mmcinfo, 1, 0, do_mmcinfo,
 	"display MMC info",
-	"- dislay info of the current MMC device"
+	"- display info of the current MMC device"
 );
 
 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

Applied to staging/agust at denx.de, thanks! Andy, I hope it is okay if this patch goes via staging tree.

Anatolij