staging: wlags49_h2: mdd.h: fixes tons of coding style issues
PATCH 3/3 staging: wlags49_h2: mdd.h: fixes tons of coding style issues
This commit sorts out a ton of styling issues, including the use of C99 // comments, spaces before and after tabs, etc. I also took the time to align stuff a little more neatly using tabs. The file is nowhere near ready, but it's a start.
Signed-off-by Johan Meiring <[email protected]>
--- drivers/staging/wlags49_h2/mdd.h | 1593 +++++++++++++++++++------------------- 1 file changed, 797 insertions(+), 796 deletions(-)
drivers/staging/wlags49_h2/mdd.h +797 -796
@@ -115,143 +115,144 @@/******************************* XX Sub-macro definitions **************************************************/ -#define XX1 ( name, type1, par1 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - type1 par1; \ +#define XX1 (name, type1, par1) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + type1 par1; \ } name##_STRCT; -#define XX2 ( name, type1, par1, type2, par2 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - type1 par1; \ - type2 par2; \ +#define XX2 (name, type1, par1, type2, par2) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + type1 par1; \ + type2 par2; \ } name##_STRCT; -#define XX3 ( name, type1, par1, type2, par2, type3, par3 ) \ -typedef struct name##_STRCT { \ - hcf_16 len; \ - hcf_16 typ; \ - type1 par1; \ - type2 par2; \ - type3 par3; \ +#define XX3 (name, type1, par1, type2, par2, type3, par3) \ +typedef struct name##_STRCT { \ + hcf_16 len; \ + hcf_16 typ; \ + type1 par1; \ + type2 par2; \ + type3 par3; \ } name##_STRCT; -#define XX4 ( name, type1, par1, type2, par2, type3, par3, type4, par4 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - type1 par1; \ - type2 par2; \ - type3 par3; \ - type4 par4; \ +#define XX4 (name, type1, par1, type2, par2, type3, par3, type4, par4) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + type1 par1; \ + type2 par2; \ + type3 par3; \ + type4 par4; \ } name##_STRCT; -#define X1 ( name, par1 ) \ -typedef struct name##_STRCT { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ +#define X1 (name, par1) \ +typedef struct name##_STRCT { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ } name##_STRCT; -#define X2 ( name, par1, par2 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ +#define X2 (name, par1, par2) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ } name##_STRCT; -#define X3 ( name, par1, par2, par3 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ +#define X3 (name, par1, par2, par3) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ } name##_STRCT; -#define X4 ( name, par1, par2, par3, par4 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ - hcf_16 par4; \ +#define X4 (name, par1, par2, par3, par4) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ + hcf_16 par4; \ } name##_STRCT; -#define X5 ( name, par1, par2, par3, par4, par5 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ - hcf_16 par4; \ - hcf_16 par5; \ +#define X5 (name, par1, par2, par3, par4, par5) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ + hcf_16 par4; \ + hcf_16 par5; \ } name##_STRCT; -#define X6 ( name, par1, par2, par3, par4, par5, par6 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ - hcf_16 par4; \ - hcf_16 par5; \ - hcf_16 par6; \ +#define X6 (name, par1, par2, par3, par4, par5, par6) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ + hcf_16 par4; \ + hcf_16 par5; \ + hcf_16 par6; \ } name##_STRCT; -#define X8 ( name, par1, par2, par3, par4, par5, par6, par7, par8 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ - hcf_16 par4; \ - hcf_16 par5; \ - hcf_16 par6; \ - hcf_16 par7; \ - hcf_16 par8; \ +#define X8 (name, par1, par2, par3, par4, par5, par6, par7, par8) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ + hcf_16 par4; \ + hcf_16 par5; \ + hcf_16 par6; \ + hcf_16 par7; \ + hcf_16 par8; \ } name##_STRCT; -#define X11 ( name, par1, par2, par3, par4, par5, par6, par7, par8, par9, par10, par11 ) \ -typedef struct { \ - hcf_16 len; \ - hcf_16 typ; \ - hcf_16 par1; \ - hcf_16 par2; \ - hcf_16 par3; \ - hcf_16 par4; \ - hcf_16 par5; \ - hcf_16 par6; \ - hcf_16 par7; \ - hcf_16 par8; \ - hcf_16 par9; \ - hcf_16 par10; \ - hcf_16 par11; \ +#define X11 (name, par1, par2, par3, par4, par5, par6, par7, par8, par9, \ + par10, par11) \ +typedef struct { \ + hcf_16 len; \ + hcf_16 typ; \ + hcf_16 par1; \ + hcf_16 par2; \ + hcf_16 par3; \ + hcf_16 par4; \ + hcf_16 par5; \ + hcf_16 par6; \ + hcf_16 par7; \ + hcf_16 par8; \ + hcf_16 par9; \ + hcf_16 par10; \ + hcf_16 par11; \ } name##_STRCT;/******************************* Substructure definitions **************************************************/ -//apparently not needed (CFG_CNF_COUNTRY) -typedef struct CHANNEL_SET {//channel set structure used in the CFG_CNF_COUNTRY LTV +/*apparently not needed (CFG_CNF_COUNTRY)*/ +typedef struct CHANNEL_SET {/*channel set structure used in the CFG_CNF_COUNTRY LTV*/ hcf_16 first_channel;hcf_16 number_of_channels;hcf_16 max_tx_output_level; }CHANNEL_SET ; -typedef struct KEY_STRCT {// key structure used in the CFG_DEFAULT_KEYS LTV -hcf_16 len;//length of key -hcf_8 key[14 ];//encryption key +typedef struct KEY_STRCT {/* key structure used in the CFG_DEFAULT_KEYS LTV */ +hcf_16 len;/* length of key */ +hcf_8 key[14 ];/* encryption key */ }KEY_STRCT ; -typedef struct SCAN_RS_STRCT { // Scan Result structure used in the CFG_SCAN LTV +typedef struct SCAN_RS_STRCT { /* Scan Result structure used in the CFG_SCAN LTV */ hcf_16 channel_id; hcf_16 noise_level; hcf_16 signal_level;
@@ -262,63 +263,62 @@ typedef struct SCAN_RS_STRCT { // Scan Result structure used in the CFG_SCANhcf_8 ssid_val[32 ]; }SCAN_RS_STRCT ; -typedef struct CFG_RANGE_SPEC_STRCT {// range specification structure used in CFG_RANGES, CFG_RANGE1 etc +typedef struct CFG_RANGE_SPEC_STRCT {/* range specification structure used in CFG_RANGES, CFG_RANGE1 etc */ hcf_16 variant;hcf_16 bottom;hcf_16 top; }CFG_RANGE_SPEC_STRCT ; -typedef struct CFG_RANGE_SPEC_BYTE_STRCT {// byte oriented range specification structure used in CFG_RANGE_B LTV +typedef struct CFG_RANGE_SPEC_BYTE_STRCT {/* byte oriented range specification structure used in CFG_RANGE_B LTV */ hcf_8 variant[2 ];hcf_8 bottom[2 ];hcf_8 top[2 ]; }CFG_RANGE_SPEC_BYTE_STRCT ; -//used to set up "T" functionality for Info frames, i.e. log info frames in MSF supplied buffer and MailBox -XX1( RID_LOG, unsigned short FAR*, bufp ) -typedef RID_LOG_STRCT FAR *RID_LOGP; -XX1( CFG_RID_LOG, RID_LOGP, recordp ) - - X1( LTV, val[1] ) /*minimum LTV proto typ */ - X1( LTV_MAX, val[HCF_MAX_LTV] ) /*maximum LTV proto typ */ -XX2( CFG_REG_MB, hcf_16* , mb_addr, hcf_16, mb_size ) - -typedef struct CFG_MB_INFO_FRAG {// specification of buffer fragment -unsigned short FAR * frag_addr; -hcf_16 frag_len; +/*used to set up "T" functionality for Info frames, i.e. log info frames in MSF supplied buffer and MailBox*/ +XX1(RID_LOG, unsigned short FAR*, bufp) +typedef RID_LOG_STRCT FAR * RID_LOGP; +XX1(CFG_RID_LOG, RID_LOGP, recordp) +X1(LTV, val[1]) /*minimum LTV proto typ */ +X1(LTV_MAX, val[HCF_MAX_LTV]) /*maximum LTV proto typ */ +XX2(CFG_REG_MB, hcf_16* , mb_addr, hcf_16, mb_size) + +typedef struct CFG_MB_INFO_FRAG {/* specification of buffer fragment */ +unsigned short FAR *frag_addr; +hcf_16 frag_len; }CFG_MB_INFO_FRAG ;/* Mail Box Info Block structures, * the base form: CFG_MB_INFO_STRCT * and the derived forms: CFG_MB_INFO_RANGE<n>_STRCT with n is 1, 2, 3 or 20 * predefined for a payload of 1, and up to 2, 3 and 20 CFG_MB_INFO_FRAG elements */ -XX3( CFG_MB_INFO, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 1] ) -XX3( CFG_MB_INFO_RANGE1, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 1] ) -XX3( CFG_MB_INFO_RANGE2, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 2] ) -XX3( CFG_MB_INFO_RANGE3, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[ 3] ) -XX3( CFG_MB_INFO_RANGE20, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[20] ) - -XX3( CFG_MB_ASSERT, hcf_16, line, hcf_16, trace, hcf_32, qualifier ) /*MBInfoBlock for asserts */ -#if (HCF_ASSERT ) & (HCF_ASSERT_LNK_MSF_RTN |HCF_ASSERT_RT_MSF_RTN ) -typedef void (MSF_ASSERT_RTN )(unsigned int ,hcf_16 ,hcf_32 ); +XX3(CFG_MB_INFO, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[1]) +XX3(CFG_MB_INFO_RANGE1, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[1]) +XX3(CFG_MB_INFO_RANGE2, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[2]) +XX3(CFG_MB_INFO_RANGE3, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[3]) +XX3(CFG_MB_INFO_RANGE20, hcf_16, base_typ, hcf_16, frag_cnt, CFG_MB_INFO_FRAG, frag_buf[20]) + +XX3(CFG_MB_ASSERT, hcf_16, line, hcf_16, trace, hcf_32, qualifier) /*MBInfoBlock for asserts */ +#if (HCF_ASSERT ) & (HCF_ASSERT_LNK_MSF_RTN |HCF_ASSERT_RT_MSF_RTN ) +typedef void (MSF_ASSERT_RTN )(unsigned int ,hcf_16 ,hcf_32 );typedef MSF_ASSERT_RTN /*can't link FAR*/ *MSF_ASSERT_RTNP ;/* CFG_REG_ASSERT_RTNP (0x0832) (de-)register MSF Callback routines * lvl: Assert level filtering (not yet implemented) * rtnp: address of MSF_ASSERT_RTN (native Endian format) */ -XX2( CFG_REG_ASSERT_RTNP, hcf_16, lvl, MSF_ASSERT_RTNP, rtnp ) -#endif // HCF_ASSERT_LNK_MSF_RTN / HCF_ASSERT_RT_MSF_RTN +XX2(CFG_REG_ASSERT_RTNP, hcf_16, lvl, MSF_ASSERT_RTNP, rtnp) +#endif /* HCF_ASSERT_LNK_MSF_RTN / HCF_ASSERT_RT_MSF_RTN */ - X1( CFG_HCF_OPT, val[20] ) /*(Compile time) options */ - X3( CFG_CMD_HCF, cmd, mode, add_info ) /*HCF Engineering command */ +X1(CFG_HCF_OPT, val[20]) /*(Compile time) options */ +X3(CFG_CMD_HCF, cmd, mode, add_info) /*HCF Engineering command */ typedef struct { hcf_16 len; hcf_16 typ; - hcf_16 mode; // PROG_STOP/VOLATILE [FLASH/SEEPROM/SEEPROM_READBACK] - hcf_16 segment_size; // size of the segment in bytes - hcf_32 nic_addr; // destination address (in NIC memory) - hcf_16 flags; // 0x0001 : CRC Yes/No -// hcf_32 flags; // 0x0001 : CRC Yes/No + hcf_16 mode; /* PROG_STOP/VOLATILE [FLASH/SEEPROM/SEEPROM_READBACK] */ + hcf_16 segment_size; /* size of the segment in bytes */ + hcf_32 nic_addr; /* destination address (in NIC memory) */ + hcf_16 flags; /* 0x0001 : CRC Yes/No */ +/* hcf_32 flags; */ /* 0x0001 : CRC Yes/No */ /* ;? still not the whole story * flags is extended from 16 to 32 bits to force that compiling FW.C produces the same structures * in memory as FUPU4 BIN files.
@@ -328,281 +328,282 @@ typedef struct {* disregard of their actual size, so aligning host_addr under MSVC 1.5 at 4 bytes, also aligns * len, typ etc on 4 bytes * */ -// hcf_16 pad; //!! be careful alignment problems for Bin download versus C download - hcf_8 FAR *host_addr; // source address (in Host memory) -}CFG_PROG_STRCT ;// segment_descp; +/* hcf_16 pad; */ /*!! be careful alignment problems for Bin download versus C download*/ + hcf_8 FAR *host_addr; /* source address (in Host memory) */ +}CFG_PROG_STRCT ;/* segment_descp; */ -// a structure used for transporting debug-related information from firmware -// via the HCF, into the MSF +/* a structure used for transporting debug-related information from firmware */ +/* via the HCF, into the MSF */ typedef struct { -hcf_16 len; -hcf_16 typ; -hcf_16 msg_id, msg_par, msg_tstamp; +hcf_16 len; +hcf_16 typ; +hcf_16 msg_id, msg_par, msg_tstamp; }CFG_FW_PRINTF_STRCT ; -// a structure used to define the location and size of a certain debug-related -// buffer in nic-ram. +/* a structure used to define the location and size of a certain debug-related */ +/* buffer in nic-ram. */ typedef struct { -hcf_16 len; -hcf_16 typ; -hcf_32 DbMsgCount,// ds (nicram) address of a counter - DbMsgBuffer,// ds (nicram) address of the buffer - DbMsgSize,// number of entries (each 3 word in size) in this buffer - DbMsgIntrvl;// ds (nicram) address of interval for generating InfDrop event +hcf_16 len; +hcf_16 typ; +hcf_32 DbMsgCount,/* ds (nicram) address of a counter */ + DbMsgBuffer,/* ds (nicram) address of the buffer */ + DbMsgSize,/* number of entries (each 3 word in size) in this buffer */ + DbMsgIntrvl;/* ds (nicram) address of interval for generating InfDrop event */ }CFG_FW_PRINTF_BUFFER_LOCATION_STRCT ; -XX3( CFG_RANGES, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 1] ) /*Actor/Supplier range (1 variant)*/ -XX3( CFG_RANGE1, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 1] ) /*Actor/Supplier range (1 variant)*/ -XX3( CFG_RANGE2, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 2] ) /*Actor range ( 2 variants) */ -XX3( CFG_RANGE3, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 3] ) /*Actor range ( 3 variants) */ -XX3( CFG_RANGE4, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 4] ) /*Actor range ( 4 variants) */ -XX3( CFG_RANGE5, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 5] ) /*Actor range ( 5 variants) */ -XX3( CFG_RANGE6, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 6] ) /*Actor range ( 6 variants) */ -XX3( CFG_RANGE7, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[ 7] ) /*Actor range ( 7 variants) */ -XX3 (CFG_RANGE20 , hcf_16, role, hcf_16, id,CFG_RANGE_SPEC_STRCT , var_rec[20 ] )/*Actor range (20 variants) */ +XX3(CFG_RANGES, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[1]) /*Actor/Supplier range (1 variant)*/ +XX3(CFG_RANGE1, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[1]) /*Actor/Supplier range (1 variant)*/ +XX3(CFG_RANGE2, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[2]) /*Actor range ( 2 variants) */ +XX3(CFG_RANGE3, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[3]) /*Actor range ( 3 variants) */ +XX3(CFG_RANGE4, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[4]) /*Actor range ( 4 variants) */ +XX3(CFG_RANGE5, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[5]) /*Actor range ( 5 variants) */ +XX3(CFG_RANGE6, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[6]) /*Actor range ( 6 variants) */ +XX3(CFG_RANGE7, hcf_16, role, hcf_16, id, CFG_RANGE_SPEC_STRCT, var_rec[7]) /*Actor range ( 7 variants) */ +XX3 (CFG_RANGE20 , hcf_16, role, hcf_16, id,CFG_RANGE_SPEC_STRCT , var_rec[20 ])/*Actor range (20 variants) */ /*Frames */ - X3( CFG_ASSOC_STAT, assoc_stat, station_addr[3], val[46] ) /*Association status, basic */ - X2( CFG_ASSOC_STAT3, assoc_stat, station_addr[3] ) /*assoc_stat:3 */ - X3( CFG_ASSOC_STAT1, assoc_stat, station_addr[3], frame_body[43] ) /*assoc_stat:1 */ -X4 (CFG_ASSOC_STAT2 , assoc_stat, station_addr[3 ], old_ap_addr[3 ], frame_body[43 ] )/*assoc_stat:2 */ +X3(CFG_ASSOC_STAT, assoc_stat, station_addr[3], val[46]) /*Association status, basic */ +X2(CFG_ASSOC_STAT3, assoc_stat, station_addr[3]) /*assoc_stat:3 */ +X3(CFG_ASSOC_STAT1, assoc_stat, station_addr[3], frame_body[43]) /*assoc_stat:1 */ +X4 (CFG_ASSOC_STAT2 , assoc_stat, station_addr[3 ], old_ap_addr[3 ], frame_body[43 ])/*assoc_stat:2 */ /*Static Configurations */ - X1( CFG_CNF_PORT_TYPE, port_type ) /*[STA] Connection control characteristics */ - X1( CFG_MAC_ADDR, mac_addr[3] ) /*general: FC01,FC08,FC11,FC12,FC13,FC14,FC15,FC16 */ - X1( CFG_CNF_OWN_MAC_ADDR, mac_addr[3] ) -X1 (CFG_ID , ssid[17 ] )/*0xFC02, 0xFC04, 0xFC0E */ +X1(CFG_CNF_PORT_TYPE, port_type) /*[STA] Connection control characteristics */ +X1(CFG_MAC_ADDR, mac_addr[3]) /*general: FC01,FC08,FC11,FC12,FC13,FC14,FC15,FC16 */ +X1(CFG_CNF_OWN_MAC_ADDR, mac_addr[3]) +X1 (CFG_ID , ssid[17 ])/*0xFC02, 0xFC04, 0xFC0E */ /* X1( CFG_DESIRED_SSID, ssid[17] ) see Dynamic Configurations */ - X1( CFG_CNF_OWN_CHANNEL, channel ) /*Communication channel for BSS creation */ - X1( CFG_CNF_OWN_SSID, ssid[17] ) - X1( CFG_CNF_OWN_ATIM_WINDOW, atim_window ) - X1( CFG_CNF_SYSTEM_SCALE, system_scale ) - X1( CFG_CNF_MAX_DATA_LEN, max_data_len ) - X1( CFG_CNF_WDS_ADDR, mac_addr[3] ) /*[STA] MAC Address of corresponding WDS Link node */ - X1( CFG_CNF_PM_ENABLED, pm_enabled ) /*[STA] Switch for ESS Power Management (PM) On/Off */ - X1( CFG_CNF_PM_EPS, pm_eps ) /*[STA] Switch for ESS PM EPS/PS Mode */ - X1( CFG_CNF_MCAST_RX, mcast_rx ) /*[STA] Switch for ESS PM Multicast reception On/Off */ - X1( CFG_CNF_MAX_SLEEP_DURATION, duration ) /*[STA] Maximum sleep time for ESS PM */ - X1( CFG_CNF_PM_HOLDOVER_DURATION, duration ) /*[STA] Holdover time for ESS PM */ - X1( CFG_CNF_OWN_NAME, ssid[17] ) /*Identification text for diagnostic purposes */ - X1( CFG_CNF_OWN_DTIM_PERIOD, period ) /*[AP] Beacon intervals between successive DTIMs */ - X1( CFG_CNF_WDS_ADDR1, mac_addr[3] ) /*[AP] Port 1 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_WDS_ADDR2, mac_addr[3] ) /*[AP] Port 2 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_WDS_ADDR3, mac_addr[3] ) /*[AP] Port 3 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_WDS_ADDR4, mac_addr[3] ) /*[AP] Port 4 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_WDS_ADDR5, mac_addr[3] ) /*[AP] Port 5 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_WDS_ADDR6, mac_addr[3] ) /*[AP] Port 6 MAC Adrs of corresponding WDS Link node */ - X1( CFG_CNF_MCAST_PM_BUF, mcast_pm_buf ) /*[AP] Switch for PM buffering of Multicast Messages */ -X1 (CFG_CNF_REJECT_ANY , reject_any )/*[AP] Switch for PM buffering of Multicast Messages */ -//X1( CFG_CNF_ENCRYPTION_ENABLED, encryption ) /*specify encryption type of Tx/Rx messages */ - X1( CFG_CNF_ENCRYPTION, encryption ) /*specify encryption type of Tx/Rx messages */ - X1( CFG_CNF_AUTHENTICATION, authentication ) /*selects Authentication algorithm */ - X1( CFG_CNF_EXCL_UNENCRYPTED, exclude_unencrypted ) /*[AP] Switch for 'clear-text' rx message acceptance */ - X1( CFG_CNF_MCAST_RATE, mcast_rate ) /*Transmit Data rate for Multicast frames */ - X1( CFG_CNF_INTRA_BSS_RELAY, intra_bss_relay ) /*[AP] Switch for IntraBBS relay */ - X1( CFG_CNF_MICRO_WAVE, micro_wave ) /*MicroWave (Robustness) */ - X1( CFG_CNF_LOAD_BALANCING, load_balancing ) /*Load Balancing (Boolean, 0=OFF, 1=ON, default=1) */ - X1( CFG_CNF_MEDIUM_DISTRIBUTION, medium_distribution ) /*Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) */ - X1( CFG_CNF_GROUP_ADDR_FILTER, group_addr_filter ) /*Group Address Filter */ - X1( CFG_CNF_TX_POW_LVL, tx_pow_lvl ) /*Tx Power Level */ -XX4 (CFG_CNF_COUNTRY_INFO , \ - hcf_16, n_channel_sets, hcf_16, country_code[2 ], \ - hcf_16, environment, CHANNEL_SET, channel_set[1] ) /*Current Country Info */ -XX4 (CFG_CNF_COUNTRY_INFO_MAX , \ - hcf_16, n_channel_sets, hcf_16, country_code[2 ], \ - hcf_16, environment,CHANNEL_SET , channel_set[14 ])/*Current Country Info */ +X1(CFG_CNF_OWN_CHANNEL, channel) /*Communication channel for BSS creation */ +X1(CFG_CNF_OWN_SSID, ssid[17]) +X1(CFG_CNF_OWN_ATIM_WINDOW, atim_window) +X1(CFG_CNF_SYSTEM_SCALE, system_scale) +X1(CFG_CNF_MAX_DATA_LEN, max_data_len) +X1(CFG_CNF_WDS_ADDR, mac_addr[3]) /*[STA] MAC Address of corresponding WDS Link node */ +X1(CFG_CNF_PM_ENABLED, pm_enabled) /*[STA] Switch for ESS Power Management (PM) On/Off */ +X1(CFG_CNF_PM_EPS, pm_eps) /*[STA] Switch for ESS PM EPS/PS Mode */ +X1(CFG_CNF_MCAST_RX, mcast_rx) /*[STA] Switch for ESS PM Multicast reception On/Off */ +X1(CFG_CNF_MAX_SLEEP_DURATION, duration) /*[STA] Maximum sleep time for ESS PM */ +X1(CFG_CNF_PM_HOLDOVER_DURATION, duration) /*[STA] Holdover time for ESS PM */ +X1(CFG_CNF_OWN_NAME, ssid[17]) /*Identification text for diagnostic purposes */ +X1(CFG_CNF_OWN_DTIM_PERIOD, period) /*[AP] Beacon intervals between successive DTIMs */ +X1(CFG_CNF_WDS_ADDR1, mac_addr[3]) /*[AP] Port 1 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_WDS_ADDR2, mac_addr[3]) /*[AP] Port 2 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_WDS_ADDR3, mac_addr[3]) /*[AP] Port 3 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_WDS_ADDR4, mac_addr[3]) /*[AP] Port 4 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_WDS_ADDR5, mac_addr[3]) /*[AP] Port 5 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_WDS_ADDR6, mac_addr[3]) /*[AP] Port 6 MAC Adrs of corresponding WDS Link node */ +X1(CFG_CNF_MCAST_PM_BUF, mcast_pm_buf) /*[AP] Switch for PM buffering of Multicast Messages */ +X1 (CFG_CNF_REJECT_ANY , reject_any)/*[AP] Switch for PM buffering of Multicast Messages */ +/*X1( CFG_CNF_ENCRYPTION_ENABLED, encryption) *//*specify encryption type of Tx/Rx messages */ +X1(CFG_CNF_ENCRYPTION, encryption) /*specify encryption type of Tx/Rx messages */ +X1(CFG_CNF_AUTHENTICATION, authentication) /*selects Authentication algorithm */ +X1(CFG_CNF_EXCL_UNENCRYPTED, exclude_unencrypted) /*[AP] Switch for 'clear-text' rx message acceptance */ +X1(CFG_CNF_MCAST_RATE, mcast_rate) /*Transmit Data rate for Multicast frames */ +X1(CFG_CNF_INTRA_BSS_RELAY, intra_bss_relay) /*[AP] Switch for IntraBBS relay */ +X1(CFG_CNF_MICRO_WAVE, micro_wave) /*MicroWave (Robustness) */ +X1(CFG_CNF_LOAD_BALANCING, load_balancing) /*Load Balancing (Boolean, 0=OFF, 1=ON, default=1) */ +X1(CFG_CNF_MEDIUM_DISTRIBUTION, medium_distribution) /*Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) */ +X1(CFG_CNF_GROUP_ADDR_FILTER, group_addr_filter) /*Group Address Filter */ +X1(CFG_CNF_TX_POW_LVL, tx_pow_lvl) /*Tx Power Level */ +XX4 (CFG_CNF_COUNTRY_INFO , + hcf_16, n_channel_sets, hcf_16, country_code[2 ], + hcf_16, environment, CHANNEL_SET, channel_set[1]) /*Current Country Info */ +XX4 (CFG_CNF_COUNTRY_INFO_MAX , + hcf_16, n_channel_sets, hcf_16, country_code[2 ], + hcf_16, environment,CHANNEL_SET , channel_set[14 ])/*Current Country Info */ /*Dynamic Configurations */ - X1( CFG_DESIRED_SSID, ssid[17] ) /*[STA] Service Set identification for connection */ -#define GROUP_ADDR_SIZE (32 * 6) //32 6-byte MAC-addresses - X1( CFG_GROUP_ADDR, mac_addr[GROUP_ADDR_SIZE/2] ) /*[STA] Multicast MAC Addresses for Rx-message */ - X1( CFG_CREATE_IBSS, create_ibss ) /*[STA] Switch for IBSS creation On/Off */ - X1( CFG_RTS_THRH, rts_thrh ) /*[STA] Frame length used for RTS/CTS handshake */ - X1( CFG_TX_RATE_CNTL, tx_rate_cntl ) /*[STA] Data rate control for message transmission */ - X1( CFG_PROMISCUOUS_MODE, promiscuous_mode ) /*[STA] Switch for Promiscuous mode reception On/Of */ - X1( CFG_WOL, wake_on_lan ) /*[STA] Switch for Wake-On-LAN mode */ - X1( CFG_RTS_THRH0, rts_thrh ) /*[AP] Port 0 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH1, rts_thrh ) /*[AP] Port 1 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH2, rts_thrh ) /*[AP] Port 2 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH3, rts_thrh ) /*[AP] Port 3 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH4, rts_thrh ) /*[AP] Port 4 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH5, rts_thrh ) /*[AP] Port 5 frame length for RTS/CTS handshake */ - X1( CFG_RTS_THRH6, rts_thrh ) /*[AP] Port 6 frame length for RTS/CTS handshake */ - X1( CFG_TX_RATE_CNTL0, rate_cntl ) /*[AP] Port 0 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL1, rate_cntl ) /*[AP] Port 1 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL2, rate_cntl ) /*[AP] Port 2 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL3, rate_cntl ) /*[AP] Port 3 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL4, rate_cntl ) /*[AP] Port 4 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL5, rate_cntl ) /*[AP] Port 5 data rate control for transmission */ - X1( CFG_TX_RATE_CNTL6, rate_cntl ) /*[AP] Port 6 data rate control for transmission */ -XX1( CFG_DEFAULT_KEYS, KEY_STRCT, key[4] ) /*defines set of encryption keys */ - X1( CFG_TX_KEY_ID, tx_key_id ) /*select key for encryption of Tx messages */ - X1( CFG_SCAN_SSID, ssid[17] ) /*identification for connection */ -X5 (CFG_ADD_TKIP_DEFAULT_KEY , \ - tkip_key_id_info, tkip_key_iv_info[4 ], tkip_key[8 ], \ - tx_mic_key[4], rx_mic_key[4] ) /* */ -X6 (CFG_ADD_TKIP_MAPPED_KEY , bssid[3 ], tkip_key[8 ], \ - tsc[4], rsc[4], tx_mic_key[4], rx_mic_key[4] ) /* */ -X1 (CFG_SET_WPA_AUTHENTICATION_SUITE , \ - ssn_authentication_suite ) /* */ - X1( CFG_REMOVE_TKIP_DEFAULT_KEY,tkip_key_id ) /* */ - X1( CFG_TICK_TIME, tick_time ) /*Auxiliary Timer tick interval */ -X1 (CFG_DDS_TICK_TIME , tick_time )/*Disconnected DeepSleep Timer tick interval */ +X1(CFG_DESIRED_SSID, ssid[17]) /*[STA] Service Set identification for connection */ +#define GROUP_ADDR_SIZE (32 * 6)/* 32 6-byte MAC-addresses */ +X1(CFG_GROUP_ADDR, mac_addr[GROUP_ADDR_SIZE/2]) /*[STA] Multicast MAC Addresses for Rx-message */ +X1(CFG_CREATE_IBSS, create_ibss) /*[STA] Switch for IBSS creation On/Off */ +X1(CFG_RTS_THRH, rts_thrh) /*[STA] Frame length used for RTS/CTS handshake */ +X1(CFG_TX_RATE_CNTL, tx_rate_cntl) /*[STA] Data rate control for message transmission */ +X1(CFG_PROMISCUOUS_MODE, promiscuous_mode) /*[STA] Switch for Promiscuous mode reception On/Of */ +X1(CFG_WOL, wake_on_lan) /*[STA] Switch for Wake-On-LAN mode */ +X1(CFG_RTS_THRH0, rts_thrh) /*[AP] Port 0 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH1, rts_thrh) /*[AP] Port 1 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH2, rts_thrh) /*[AP] Port 2 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH3, rts_thrh) /*[AP] Port 3 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH4, rts_thrh) /*[AP] Port 4 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH5, rts_thrh) /*[AP] Port 5 frame length for RTS/CTS handshake */ +X1(CFG_RTS_THRH6, rts_thrh) /*[AP] Port 6 frame length for RTS/CTS handshake */ +X1(CFG_TX_RATE_CNTL0, rate_cntl) /*[AP] Port 0 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL1, rate_cntl) /*[AP] Port 1 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL2, rate_cntl) /*[AP] Port 2 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL3, rate_cntl) /*[AP] Port 3 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL4, rate_cntl) /*[AP] Port 4 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL5, rate_cntl) /*[AP] Port 5 data rate control for transmission */ +X1(CFG_TX_RATE_CNTL6, rate_cntl) /*[AP] Port 6 data rate control for transmission */ +XX1(CFG_DEFAULT_KEYS, KEY_STRCT, key[4]) /*defines set of encryption keys */ +X1(CFG_TX_KEY_ID, tx_key_id) /*select key for encryption of Tx messages */ +X1(CFG_SCAN_SSID, ssid[17]) /*identification for connection */ +X5 (CFG_ADD_TKIP_DEFAULT_KEY , + tkip_key_id_info, tkip_key_iv_info[4 ], tkip_key[8 ], + tx_mic_key[4], rx_mic_key[4]) +X6 (CFG_ADD_TKIP_MAPPED_KEY , bssid[3 ], tkip_key[8 ], + tsc[4], rsc[4], tx_mic_key[4], rx_mic_key[4]) +X1 (CFG_SET_WPA_AUTHENTICATION_SUITE , + ssn_authentication_suite) +X1(CFG_REMOVE_TKIP_DEFAULT_KEY, tkip_key_id) +X1(CFG_TICK_TIME, tick_time) /*Auxiliary Timer tick interval */ +X1 (CFG_DDS_TICK_TIME , tick_time)/* Disconnected DeepSleep Timer tick interval */ /********************************************************************** * Added for Pattern-matching WakeOnLan. (See firmware design note WMDN281C) **********************************************************************/ -#define WOL_PATTERNS 5 // maximum of 5 patterns in firmware -#define WOL_PATTERN_LEN 124 // maximum 124 bytes pattern length per pattern in firmware -#define WOL_MASK_LEN 30 // maximum 30 bytes mask length per pattern in firmware +#define WOL_PATTERNS 5/* maximum of 5 patterns in firmware */ +#define WOL_PATTERN_LEN 124/* maximum 124 bytes pattern length per pattern in firmware */ +#define WOL_MASK_LEN 30/* maximum 30 bytes mask length per pattern in firmware */ #define WOL_BUF_SIZE (WOL_PATTERNS * (WOL_PATTERN_LEN + WOL_MASK_LEN + 6) / 2) -X2( CFG_WOL_PATTERNS, nPatterns, buffer[WOL_BUF_SIZE] ) /*[STA] WakeOnLan pattern match, room for 5 patterns*/ +X2(CFG_WOL_PATTERNS, nPatterns, buffer[WOL_BUF_SIZE]) /*[STA] WakeOnLan pattern match, room for 5 patterns*/ -X5 (CFG_SUP_RANGE , role, id, variant, bottom, top )/*[PRI] Primary Supplier compatibility range */ +X5 (CFG_SUP_RANGE , role, id, variant, bottom, top)/*[PRI] Primary Supplier compatibility range */ /* NIC Information */ - X4( CFG_IDENTITY, comp_id, variant, version_major, version_minor ) /*identification Prototype */ +X4(CFG_IDENTITY, comp_id, variant, version_major, version_minor) /*identification Prototype */#define CFG_DRV_IDENTITY_STRCT CFG_IDENTITY_STRCT#define CFG_PRI_IDENTITY_STRCT CFG_IDENTITY_STRCT#define CFG_NIC_IDENTITY_STRCT CFG_IDENTITY_STRCT#define CFG_FW_IDENTITY_STRCT CFG_IDENTITY_STRCT - X1( CFG_RID_INF_MIN, y ) /*lowest value representing an Information RID */ - X1( CFG_MAX_LOAD_TIME, max_load_time ) /*[PRI] Max response time of the Download command */ -X3 (CFG_DL_BUF , buf_page, buf_offset, buf_len )/*[PRI] Download buffer location and size */ -// X5( CFG_PRI_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Primary Supplier compatibility range */ -X5 (CFG_CFI_ACT_RANGES_PRI ,role, id, variant, bottom, top )/*[PRI] Controller Actor compatibility ranges */ -// X5( CFG_NIC_HSI_SUP_RANGE, role, id, variant, bottom, top ) /*H/W - S/W I/F supplier range */ - X1( CFG_NIC_SERIAL_NUMBER, serial_number[17] ) /*[PRI] Network I/F Card serial number */ - X5( CFG_NIC_MFI_SUP_RANGE, role, id, variant, bottom, top ) /*[PRI] Modem I/F Supplier compatibility range */ -X5 (CFG_NIC_CFI_SUP_RANGE , role, id, variant, bottom, top )/*[PRI] Controller I/F Supplier compatibility range*/ -//H-I X1( CFG_CHANNEL_LIST, channel_list ) /*Allowed communication channels */ -//H-I XX2( CFG_REG_DOMAINS, hcf_16, num_domain, hcf_8, reg_domains[10] ) /*List of intended regulatory domains */ -X1 (CFG_NIC_TEMP_TYPE , temp_type )/*Hardware temperature range code */ -//H-I X1( CFG_CIS, cis[240] ) /*PC Card Standard Card Information Structure */ -X5 (CFG_NIC_PROFILE , \ - profile_code, capability_options, allowed_data_rates, val4, val5 )/*Card Profile */ -// X5( CFG_FW_SUP_RANGE, role, id, variant, bottom, top ) /*[STA] Station I/F Supplier compatibility range */ - X5( CFG_MFI_ACT_RANGES, role, id, variant, bottom, top ) /*[STA] Modem I/F Actor compatibility ranges */ - X5( CFG_CFI_ACT_RANGES_STA,role, id, variant, bottom, top ) /*[STA] Controller I/F Actor compatibility ranges */ - X5( CFG_MFI_ACT_RANGES_STA,role, id, variant, bottom, top ) /*[STA] Controller I/F Actor compatibility ranges */ -X1 (CFG_NIC_BUS_TYPE , nic_bus_type )/*NIC bustype derived from BUSSEL host I/F signals */ +X1(CFG_RID_INF_MIN, y) /*lowest value representing an Information RID */ +X1(CFG_MAX_LOAD_TIME, max_load_time) /*[PRI] Max response time of the Download command */ +X3 (CFG_DL_BUF , buf_page, buf_offset, buf_len)/*[PRI] Download buffer location and size */ +/* X5(CFG_PRI_SUP_RANGE, role, id, variant, bottom, top) */ /*[PRI] Primary Supplier compatibility range */ +X5 (CFG_CFI_ACT_RANGES_PRI , role, id, variant, bottom, top)/*[PRI] Controller Actor compatibility ranges */ +/* X5(CFG_NIC_HSI_SUP_RANGE, role, id, variant, bottom, top) */ /*H/W - S/W I/F supplier range */ +X1(CFG_NIC_SERIAL_NUMBER, serial_number[17]) /*[PRI] Network I/F Card serial number */ +X5(CFG_NIC_MFI_SUP_RANGE, role, id, variant, bottom, top) /*[PRI] Modem I/F Supplier compatibility range */ +X5 (CFG_NIC_CFI_SUP_RANGE , role, id, variant, bottom, top)/*[PRI] Controller I/F Supplier compatibility range*/ +/*H-I X1(CFG_CHANNEL_LIST, channel_list) */ /*Allowed communication channels */ +/*H-I XX2(CFG_REG_DOMAINS, hcf_16, num_domain, hcf_8, reg_domains[10]) */ /*List of intended regulatory domains */ +X1 (CFG_NIC_TEMP_TYPE , temp_type)/*Hardware temperature range code */ +/*H-I X1( CFG_CIS, cis[240]) */ /*PC Card Standard Card Information Structure */ +X5 (CFG_NIC_PROFILE , + profile_code, capability_options, allowed_data_rates, val4, val5)/*Card Profile */ +/* X5( CFG_FW_SUP_RANGE, role, id, variant, bottom, top ) */ /*[STA] Station I/F Supplier compatibility range */ +X5(CFG_MFI_ACT_RANGES, role, id, variant, bottom, top) /*[STA] Modem I/F Actor compatibility ranges */ +X5(CFG_CFI_ACT_RANGES_STA, role, id, variant, bottom, top) /*[STA] Controller I/F Actor compatibility ranges */ +X5(CFG_MFI_ACT_RANGES_STA, role, id, variant, bottom, top) /*[STA] Controller I/F Actor compatibility ranges */ +X1 (CFG_NIC_BUS_TYPE , nic_bus_type)/*NIC bustype derived from BUSSEL host I/F signals */ /* MAC INFORMATION */ - X1( CFG_PORT_STAT, port_stat ) /*[STA] Actual MAC Port connection control status */ - X1( CFG_CUR_SSID, ssid[17] ) /*[STA] Identification of the actually connected SS */ - X1( CFG_CUR_BSSID, mac_addr[3] ) /*[STA] Identification of the actually connected BSS */ - X3( CFG_COMMS_QUALITY, coms_qual, signal_lvl, noise_lvl ) /*[STA] Quality of the Basic Service Set connection */ - X1( CFG_CUR_TX_RATE, rate ) /*[STA] Actual transmit data rate */ - X1( CFG_CUR_BEACON_INTERVAL, interval ) /*Beacon transmit interval time for BSS creation */ +X1(CFG_PORT_STAT, port_stat) /*[STA] Actual MAC Port connection control status */ +X1(CFG_CUR_SSID, ssid[17]) /*[STA] Identification of the actually connected SS */ +X1(CFG_CUR_BSSID, mac_addr[3]) /*[STA] Identification of the actually connected BSS */ +X3(CFG_COMMS_QUALITY, coms_qual, signal_lvl, noise_lvl) /*[STA] Quality of the Basic Service Set connection */ +X1(CFG_CUR_TX_RATE, rate) /*[STA] Actual transmit data rate */ +X1(CFG_CUR_BEACON_INTERVAL, interval) /*Beacon transmit interval time for BSS creation */#if (HCF_TYPE ) &HCF_TYPE_WARP -X11 (CFG_CUR_SCALE_THRH , \ - carrier_detect_thrh_cck, carrier_detect_thrh_ofdm, defer_thrh, \ - energy_detect_thrh, rssi_on_thrh_deviation, \ - rssi_off_thrh_deviation, cck_drop_thrh, ofdm_drop_thrh, \ - cell_search_thrh, out_of_range_thrh, delta_snr ) +X11 (CFG_CUR_SCALE_THRH , + carrier_detect_thrh_cck, carrier_detect_thrh_ofdm, defer_thrh, + energy_detect_thrh, rssi_on_thrh_deviation, + rssi_off_thrh_deviation, cck_drop_thrh, ofdm_drop_thrh, + cell_search_thrh, out_of_range_thrh, delta_snr)#else -X6 (CFG_CUR_SCALE_THRH , \ - energy_detect_thrh, carrier_detect_thrh, defer_thrh, \ - cell_search_thrh, out_of_range_thrh, delta_snr ) /*Actual System Scale thresholds settings */ -#endif // HCF_TYPE_WARP - X1( CFG_PROTOCOL_RSP_TIME, time ) /*Max time to await a response to a request message */ - X1( CFG_CUR_SHORT_RETRY_LIMIT, limit ) /*Max number of transmit attempts for short frames */ - X1( CFG_CUR_LONG_RETRY_LIMIT, limit ) /*Max number of transmit attempts for long frames */ - X1( CFG_MAX_TX_LIFETIME, time ) /*Max transmit frame handling duration */ - X1( CFG_MAX_RX_LIFETIME, time ) /*Max received frame handling duration */ - X1( CFG_CF_POLLABLE, cf_pollable ) /*[STA] Contention Free pollable capability indication */ - X2( CFG_AUTHENTICATION_ALGORITHMS,authentication_type, type_enabled ) /*Authentication Algorithm */ - X1( CFG_PRIVACY_OPT_IMPLEMENTED,privacy_opt_implemented ) /*WEP Option availability indication */ - X1( CFG_CUR_REMOTE_RATES, rates ) /*CurrentRemoteRates */ - X1( CFG_CUR_USED_RATES, rates ) /*CurrentUsedRates */ - X1( CFG_CUR_SYSTEM_SCALE, current_system_scale ) /*CurrentUsedRates */ - X1( CFG_CUR_TX_RATE1, rate ) /*[AP] Actual Port 1 transmit data rate */ - X1( CFG_CUR_TX_RATE2, rate ) /*[AP] Actual Port 2 transmit data rate */ - X1( CFG_CUR_TX_RATE3, rate ) /*[AP] Actual Port 3 transmit data rate */ - X1( CFG_CUR_TX_RATE4, rate ) /*[AP] Actual Port 4 transmit data rate */ - X1( CFG_CUR_TX_RATE5, rate ) /*[AP] Actual Port 5 transmit data rate */ - X1( CFG_CUR_TX_RATE6, rate ) /*[AP] Actual Port 6 transmit data rate */ - X1( CFG_OWN_MAC_ADDR, mac_addr[3] ) /*[AP] Unique local node MAC Address */ -X3 (CFG_PCF_INFO , medium_occupancy_limit, \ - cfp_period, cfp_max_duration ) /*[AP] Point Coordination Function capability info */ - X1( CFG_CUR_WPA_INFO_ELEMENT, ssn_info_element[1] ) /* */ -X4 (CFG_CUR_TKIP_IV_INFO , \ - tkip_seq_cnt0[4 ], tkip_seq_cnt1[4 ], \ - tkip_seq_cnt2[4], tkip_seq_cnt3[4] ) /* */ - X2( CFG_CUR_ASSOC_REQ_INFO, frame_type, frame_body[1] ) /* 0xFD8C */ -X2 (CFG_CUR_ASSOC_RESP_INFO , frame_type, frame_body[1 ] )/* 0xFD8D */ +X6 (CFG_CUR_SCALE_THRH , + energy_detect_thrh, carrier_detect_thrh, defer_thrh, + cell_search_thrh, out_of_range_thrh, delta_snr) /*Actual System Scale thresholds settings */ +#endif /* HCF_TYPE_WARP */ +X1(CFG_PROTOCOL_RSP_TIME, time) /*Max time to await a response to a request message */ +X1(CFG_CUR_SHORT_RETRY_LIMIT, limit) /*Max number of transmit attempts for short frames */ +X1(CFG_CUR_LONG_RETRY_LIMIT, limit) /*Max number of transmit attempts for long frames */ +X1(CFG_MAX_TX_LIFETIME, time) /*Max transmit frame handling duration */ +X1(CFG_MAX_RX_LIFETIME, time) /*Max received frame handling duration */ +X1(CFG_CF_POLLABLE, cf_pollable) /*[STA] Contention Free pollable capability indication */ +X2(CFG_AUTHENTICATION_ALGORITHMS, authentication_type, type_enabled) /*Authentication Algorithm */ +X1(CFG_PRIVACY_OPT_IMPLEMENTED, privacy_opt_implemented) /*WEP Option availability indication */ +X1(CFG_CUR_REMOTE_RATES, rates) /*CurrentRemoteRates */ +X1(CFG_CUR_USED_RATES, rates) /*CurrentUsedRates */ +X1(CFG_CUR_SYSTEM_SCALE, current_system_scale) /*CurrentUsedRates */ +X1(CFG_CUR_TX_RATE1, rate) /*[AP] Actual Port 1 transmit data rate */ +X1(CFG_CUR_TX_RATE2, rate) /*[AP] Actual Port 2 transmit data rate */ +X1(CFG_CUR_TX_RATE3, rate) /*[AP] Actual Port 3 transmit data rate */ +X1(CFG_CUR_TX_RATE4, rate) /*[AP] Actual Port 4 transmit data rate */ +X1(CFG_CUR_TX_RATE5, rate) /*[AP] Actual Port 5 transmit data rate */ +X1(CFG_CUR_TX_RATE6, rate) /*[AP] Actual Port 6 transmit data rate */ +X1(CFG_OWN_MAC_ADDR, mac_addr[3]) /*[AP] Unique local node MAC Address */ +X3 (CFG_PCF_INFO , medium_occupancy_limit, + cfp_period, cfp_max_duration) /*[AP] Point Coordination Function capability info */ +X1(CFG_CUR_WPA_INFO_ELEMENT, ssn_info_element[1]) +X4 (CFG_CUR_TKIP_IV_INFO , + tkip_seq_cnt0[4 ], tkip_seq_cnt1[4 ], + tkip_seq_cnt2[4], tkip_seq_cnt3[4]) +X2(CFG_CUR_ASSOC_REQ_INFO, frame_type, frame_body[1]) /* 0xFD8C */ +X2 (CFG_CUR_ASSOC_RESP_INFO , frame_type, frame_body[1 ])/* 0xFD8D */ /* Modem INFORMATION */ - X1( CFG_PHY_TYPE, phy_type ) /*Physical layer type indication */ - X1( CFG_CUR_CHANNEL, current_channel ) /*Actual frequency channel used for transmission */ - X1( CFG_CUR_POWER_STATE, current_power_state ) /*Actual power consumption status */ - X1( CFG_CCAMODE, cca_mode ) /*Clear channel assessment mode indication */ -X1 (CFG_SUPPORTED_DATA_RATES , rates[5 ] )/*Data rates capability information */ +X1(CFG_PHY_TYPE, phy_type) /*Physical layer type indication */ +X1(CFG_CUR_CHANNEL, current_channel) /*Actual frequency channel used for transmission */ +X1(CFG_CUR_POWER_STATE, current_power_state) /*Actual power consumption status */ +X1(CFG_CCAMODE, cca_mode) /*Clear channel assessment mode indication */ +X1 (CFG_SUPPORTED_DATA_RATES , rates[5 ])/*Data rates capability information */ /* FRAMES */ -XX1 (CFG_SCAN ,SCAN_RS_STRCT , scan_result[32 ] )/*Scan results */ - +XX1 (CFG_SCAN ,SCAN_RS_STRCT , scan_result[32 ])/*Scan results */ -//-------------------------------------------------------------------------------------- -// UIL management function to be passed to WaveLAN/IEEE Drivers in DUI_STRCT field fun -//-------------------------------------------------------------------------------------- -// HCF and UIL Common -#define MDD_ACT_SCAN 0x06 // Hermes Inquire Scan (F101) command -#define MDD_ACT_PRS_SCAN 0x07 // Hermes Probe Response Scan (F102) command - -// UIL Specific -#define UIL_FUN_CONNECT 0x00 // Perform connect command -#define UIL_FUN_DISCONNECT 0x01 // Perform disconnect command -#define UIL_FUN_ACTION 0x02 // Perform UIL Action command. -#define UIL_FUN_SEND_DIAG_MSG 0x03 // Send a diagnostic message. -#define UIL_FUN_GET_INFO 0x04 // Retrieve information from NIC. -#define UIL_FUN_PUT_INFO 0x05 // Put information on NIC. +/*-------------------------------------------------------------------------------------- +* UIL management function to be passed to WaveLAN/IEEE Drivers in DUI_STRCT field fun +*-------------------------------------------------------------------------------------- +*/ -/* UIL_ACT_TALLIES 0x05 * this should not be exported to the USF -* it is solely intended as a strategic choice for the MSF to either -* - use HCF_ACT_TALLIES and direct IFB access -* - use CFG_TALLIES -*/ +/* HCF and UIL Common */ +#define MDD_ACT_SCAN 0x06/* Hermes Inquire Scan (F101) command */ +#define MDD_ACT_PRS_SCAN 0x07/* Hermes Probe Response Scan (F102) command */ + +/* UIL Specific */ +#define UIL_FUN_CONNECT 0x00/* Perform connect command */ +#define UIL_FUN_DISCONNECT 0x01/* Perform disconnect command */ +#define UIL_FUN_ACTION 0x02/* Perform UIL Action command. */ +#define UIL_FUN_SEND_DIAG_MSG 0x03/* Send a diagnostic message. */ +#define UIL_FUN_GET_INFO 0x04/* Retrieve information from NIC. */ +#define UIL_FUN_PUT_INFO 0x05/* Put information on NIC. */ + +/* UIL_ACT_TALLIES 0x05 * this should not be exported to the USF +* it is solely intended as a strategic choice for the MSF to either +* - use HCF_ACT_TALLIES and direct IFB access +* - use CFG_TALLIES +*/ #define UIL_ACT_SCAN MDD_ACT_SCAN -#define UIL_ACT_PRS_SCAN MDD_ACT_PRS_SCAN -#define UIL_ACT_BLOCK 0x0B -#define UIL_ACT_UNBLOCK 0x0C -#define UIL_ACT_RESET 0x80 -#define UIL_ACT_REBIND 0x81 -#define UIL_ACT_APPLY 0x82 -#define UIL_ACT_DISCONNECT 0x83 //;?040108 possibly obsolete //Special for WINCE - -// HCF Specific +#define UIL_ACT_PRS_SCAN MDD_ACT_PRS_SCAN +#define UIL_ACT_BLOCK 0x0B +#define UIL_ACT_UNBLOCK 0x0C +#define UIL_ACT_RESET 0x80 +#define UIL_ACT_REBIND 0x81 +#define UIL_ACT_APPLY 0x82 +#define UIL_ACT_DISCONNECT 0x83/*;?040108 possibly obsolete */ /* Special for WINCE */ + +/* HCF Specific */ /* Note that UIL_ACT-codes must match HCF_ACT-codes across a run-time bound I/F * The initial matching is achieved by "#define HCF_ACT_xxx HCF_UIL_ACT_xxx" where appropriate * In other words, these codes should never, ever change to minimize migration problems between * combinations of old drivers and new utilities and vice versa */ -#define HCF_DISCONNECT 0x01 //disconnect request for hcf_connect (invalid as IO Address) -#define HCF_ACT_TALLIES 0x05 // ! UIL_ACT_TALLIES does not exist ! Hermes Inquire Tallies (F100) cmd -#if ( (HCF_TYPE ) &HCF_TYPE_WARP ) ==0 +#define HCF_DISCONNECT 0x01/*disconnect request for hcf_connect (invalid as IO Address) */ +#define HCF_ACT_TALLIES 0x05/* ! UIL_ACT_TALLIES does not exist ! Hermes Inquire Tallies (F100) cmd */ +#if ((HCF_TYPE ) &HCF_TYPE_WARP ) ==0 #define HCF_ACT_SCAN MDD_ACT_SCAN -#endif // HCF_TYPE_WARP +#endif /* HCF_TYPE_WARP */ #define HCF_ACT_PRS_SCAN MDD_ACT_PRS_SCAN#if HCF_INT_ON -#define HCF_ACT_INT_OFF 0x0D // Disable Interrupt generation -#define HCF_ACT_INT_ON 0x0E // Enable Interrupt generation -#define HCF_ACT_INT_FORCE_ON 0x0F // Enforce Enable Interrupt generation -#endif // HCF_INT_ON -#define HCF_ACT_RX_ACK 0x15 // Receiever ACK (optimization) +#define HCF_ACT_INT_OFF 0x0D/* Disable Interrupt generation */ +#define HCF_ACT_INT_ON 0x0E/* Enable Interrupt generation */ +#define HCF_ACT_INT_FORCE_ON 0x0F/* Enforce Enable Interrupt generation */ +#endif /* HCF_INT_ON */ +#define HCF_ACT_RX_ACK 0x15/* Receiever ACK (optimization) */ #if (HCF_TYPE ) &HCF_TYPE_CCX -#define HCF_ACT_CCX_ON 0x1A // enable CKIP -#define HCF_ACT_CCX_OFF 0x1B // disable CKIP -#endif // HCF_TYPE_CCX +#define HCF_ACT_CCX_ON 0x1A/* enable CKIP */ +#define HCF_ACT_CCX_OFF 0x1B/* disable CKIP */ +#endif /* HCF_TYPE_CCX */ #if (HCF_SLEEP ) &HCF_DDS -#define HCF_ACT_SLEEP 0x1C // DDS Sleep request -//#define HCF_ACT_WAKEUP 0x1D // DDS Wakeup request -#endif // HCF_DDS +#define HCF_ACT_SLEEP 0x1C/* DDS Sleep request */ +/*#define HCF_ACT_WAKEUP 0x1D */ /* DDS Wakeup request */ +#endif /* HCF_DDS */ -/* HCF_ACT_MAX // xxxx: start value for UIL-range, NOT to be passed to HCF +/* HCF_ACT_MAX xxxx: start value for UIL-range, NOT to be passed to HCF * Too bad, there was originally no spare room created to use * HCF_ACT_MAX as an equivalent of HCF_ERR_MAX. Since creating * this room in retrospect would create a backward incompatibility
@@ -613,267 +614,267 @@ XX1( CFG_SCAN, SCAN_RS_STRCT, scan_result[32] ) /*Scan results **/ /*============================================================= HERMES RECORDS ============================*/ -#define CFG_RID_FW_MIN 0xFA00 //lowest value representing a Hermes-II based RID -// #define CFG_PDA_BEGIN 0xFA // -// #define CFG_PDA_END 0xFA // -// #define CFG_PDA_NIC_TOP_LVL_ASSEMBLY_NUMBER 0xFA // -// #define CFG_PDA_PCB_TRACER_NUMBER 0xFA // -// #define CFG_PDA_RMM_TRACER_NUMBER 0xFA // -// #define CFG_PDA_RMM_COMP_ID 0xFA // -// #define CFG_PDA_ 0xFA // +#define CFG_RID_FW_MIN 0xFA00/*lowest value representing a Hermes-II based RI */ +/* #define CFG_PDA_BEGIN 0xFA */ +/* #define CFG_PDA_END 0xFA */ +/* #define CFG_PDA_NIC_TOP_LVL_ASSEMBLY_NUMBER 0xFA */ +/* #define CFG_PDA_PCB_TRACER_NUMBER 0xFA */ +/* #define CFG_PDA_RMM_TRACER_NUMBER 0xFA */ +/* #define CFG_PDA_RMM_COMP_ID 0xFA */ +/* #define CFG_PDA_ 0xFA */ /*============================================================= CONFIGURATION RECORDS =====================*/ /*============================================================= mask 0xFCxx =====================*/ -#define CFG_RID_CFG_MIN 0xFC00 //lowest value representing a Hermes configuration RID - -// NETWORK PARAMETERS, STATIC CONFIGURATION ENTITIES -//FC05, FC0B, FC0C, FC0D: SEE W2DN149 - -#define CFG_CNF_PORT_TYPE 0xFC00 //[STA] Connection control characteristics -#define CFG_CNF_OWN_MAC_ADDR 0xFC01 //[STA] MAC Address of this node -// 0xFC02 see DYNAMIC CONFIGURATION ENTITIES -#define CFG_CNF_OWN_CHANNEL 0xFC03 //Communication channel for BSS creation -#define CFG_CNF_OWN_SSID 0xFC04 //IBSS creation (STA) or ESS (AP) Service Set Ident -#define CFG_CNF_OWN_ATIM_WINDOW 0xFC05 //[STA] ATIM Window time for IBSS creation -#define CFG_CNF_SYSTEM_SCALE 0xFC06 //System Scale that specifies the AP density -#define CFG_CNF_MAX_DATA_LEN 0xFC07 //Maximum length of MAC Frame Body data -#define CFG_CNF_PM_ENABLED 0xFC09 //[STA] Switch for ESS Power Management (PM) -#define CFG_CNF_MCAST_RX 0xFC0B //[STA] Switch for ESS PM Multicast reception On/Off -#define CFG_CNF_MAX_SLEEP_DURATION 0xFC0C //[STA] Maximum sleep time for ESS PM -#define CFG_CNF_HOLDOVER_DURATION 0xFC0D //[STA] Holdover time for ESS PM -#define CFG_CNF_OWN_NAME 0xFC0E //Identification text for diagnostic purposes - -#define CFG_CNF_OWN_DTIM_PERIOD 0xFC10 //[AP] Beacon intervals between successive DTIMs -#define CFG_CNF_WDS_ADDR1 0xFC11 //[AP] Port 1 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_WDS_ADDR2 0xFC12 //[AP] Port 2 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_WDS_ADDR3 0xFC13 //[AP] Port 3 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_WDS_ADDR4 0xFC14 //[AP] Port 4 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_WDS_ADDR5 0xFC15 //[AP] Port 5 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_WDS_ADDR6 0xFC16 //[AP] Port 6 MAC Adrs of corresponding WDS Link node -#define CFG_CNF_PM_MCAST_BUF 0xFC17 //[AP] Switch for PM buffereing of Multicast Messages -#define CFG_CNF_MCAST_PM_BUF CFG_CNF_PM_MCAST_BUF //name does not match H-II spec -#define CFG_CNF_REJECT_ANY 0xFC18 //[AP] Switch for PM buffering of Multicast Messages - -#define CFG_CNF_ENCRYPTION 0xFC20 //select en/de-cryption of Tx/Rx messages -#define CFG_CNF_AUTHENTICATION 0xFC21 //[STA] selects Authentication algorithm -#define CFG_CNF_EXCL_UNENCRYPTED 0xFC22 //[AP] Switch for 'clear-text' rx message acceptance -#define CFG_CNF_MCAST_RATE 0xFC23 //Transmit Data rate for Multicast frames -#define CFG_CNF_INTRA_BSS_RELAY 0xFC24 //[AP] Switch for IntraBBS relay -#define CFG_CNF_MICRO_WAVE 0xFC25 //MicroWave (Robustness) -#define CFG_CNF_LOAD_BALANCING 0xFC26 //Load Balancing (Boolean, 0=OFF, 1=ON, default=1) -#define CFG_CNF_MEDIUM_DISTRIBUTION 0xFC27 //Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) -#define CFG_CNF_RX_ALL_GROUP_ADDR 0xFC28 //[STA] Group Address Filter -#define CFG_CNF_COUNTRY_INFO 0xFC29 //Country Info +#define CFG_RID_CFG_MIN 0xFC00/* lowest value representing a Hermes configuration RID */ + +/* NETWORK PARAMETERS, STATIC CONFIGURATION ENTITIES */ +/* FC05, FC0B, FC0C, FC0D: SEE W2DN149 */ + +#define CFG_CNF_PORT_TYPE 0xFC00/* [STA] Connection control characteristics */ +#define CFG_CNF_OWN_MAC_ADDR 0xFC01/* [STA] MAC Address of this node */ +/* 0xFC02 see DYNAMIC CONFIGURATION ENTITIES */ +#define CFG_CNF_OWN_CHANNEL 0xFC03/* Communication channel for BSS creation */ +#define CFG_CNF_OWN_SSID 0xFC04/* IBSS creation (STA) or ESS (AP) Service Set Ident */ +#define CFG_CNF_OWN_ATIM_WINDOW 0xFC05/* [STA] ATIM Window time for IBSS creation */ +#define CFG_CNF_SYSTEM_SCALE 0xFC06/* System Scale that specifies the AP density */ +#define CFG_CNF_MAX_DATA_LEN 0xFC07/* Maximum length of MAC Frame Body data */ +#define CFG_CNF_PM_ENABLED 0xFC09/* [STA] Switch for ESS Power Management (PM) */ +#define CFG_CNF_MCAST_RX 0xFC0B/* [STA] Switch for ESS PM Multicast reception On/Off */ +#define CFG_CNF_MAX_SLEEP_DURATION 0xFC0C/* [STA] Maximum sleep time for ESS PM */ +#define CFG_CNF_HOLDOVER_DURATION 0xFC0D/* [STA] Holdover time for ESS PM */ +#define CFG_CNF_OWN_NAME 0xFC0E/* Identification text for diagnostic purposes */ + +#define CFG_CNF_OWN_DTIM_PERIOD 0xFC10/* [AP] Beacon intervals between successive DTIMs */ +#define CFG_CNF_WDS_ADDR1 0xFC11/* [AP] Port 1 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_WDS_ADDR2 0xFC12/* [AP] Port 2 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_WDS_ADDR3 0xFC13/* [AP] Port 3 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_WDS_ADDR4 0xFC14/* [AP] Port 4 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_WDS_ADDR5 0xFC15/* [AP] Port 5 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_WDS_ADDR6 0xFC16/* [AP] Port 6 MAC Adrs of corresponding WDS Link node */ +#define CFG_CNF_PM_MCAST_BUF 0xFC17/* [AP] Switch for PM buffereing of Multicast Messages */ +#define CFG_CNF_MCAST_PM_BUF CFG_CNF_PM_MCAST_BUF/* name does not match H-II spec */ +#define CFG_CNF_REJECT_ANY 0xFC18/* [AP] Switch for PM buffering of Multicast Messages */ + +#define CFG_CNF_ENCRYPTION 0xFC20/* select en/de-cryption of Tx/Rx messages */ +#define CFG_CNF_AUTHENTICATION 0xFC21/* [STA] selects Authentication algorithm */ +#define CFG_CNF_EXCL_UNENCRYPTED 0xFC22/* [AP] Switch for 'clear-text' rx message acceptance */ +#define CFG_CNF_MCAST_RATE 0xFC23/* Transmit Data rate for Multicast frames */ +#define CFG_CNF_INTRA_BSS_RELAY 0xFC24/* [AP] Switch for IntraBBS relay */ +#define CFG_CNF_MICRO_WAVE 0xFC25/* MicroWave (Robustness) */ +#define CFG_CNF_LOAD_BALANCING 0xFC26/* Load Balancing (Boolean, 0=OFF, 1=ON, default=1) */ +#define CFG_CNF_MEDIUM_DISTRIBUTION 0xFC27/* Medium Distribution (Boolean, 0=OFF, 1=ON, default=1) */ +#define CFG_CNF_RX_ALL_GROUP_ADDR 0xFC28/* [STA] Group Address Filter */ +#define CFG_CNF_COUNTRY_INFO 0xFC29/* Country Info */ #if (HCF_TYPE ) &HCF_TYPE_WARP -#define CFG_CNF_TX_POW_LVL 0xFC2A //TxPower Level -#define CFG_CNF_CONNECTION_CNTL 0xFC30 //[STA] Connection Control -#define CFG_CNF_OWN_BEACON_INTERVAL 0xFC31 //[AP] -#define CFG_CNF_SHORT_RETRY_LIMIT 0xFC32 // -#define CFG_CNF_LONG_RETRY_LIMIT 0xFC33 // -#define CFG_CNF_TX_EVENT_MODE 0xFC34 // -#define CFG_CNF_WIFI_COMPATIBLE 0xFC35 //[STA] Wifi compatible -#endif // HCF_TYPE_WARP +#define CFG_CNF_TX_POW_LVL 0xFC2A/* TxPower Level */ +#define CFG_CNF_CONNECTION_CNTL 0xFC30/* [STA] Connection Control */ +#define CFG_CNF_OWN_BEACON_INTERVAL 0xFC31/* [AP] */ +#define CFG_CNF_SHORT_RETRY_LIMIT 0xFC32/* */ +#define CFG_CNF_LONG_RETRY_LIMIT 0xFC33/* */ +#define CFG_CNF_TX_EVENT_MODE 0xFC34/* */ +#define CFG_CNF_WIFI_COMPATIBLE 0xFC35/* [STA] Wifi compatible */ +#endif /* HCF_TYPE_WARP */ #if (HCF_TYPE ) &HCF_TYPE_BEAGLE_HII5 #define CFG_VOICE_RETRY_LIMIT 0xFC36/* Voice frame retry limit. Range: 1-15, default: 4 */ #define CFG_VOICE_CONTENTION_WINDOW 0xFC37/* Contention window for voice frames. */ -#endif // BEAGLE_HII5 - -// NETWORK PARAMETERS, DYNAMIC CONFIGURATION ENTITIES -#define CFG_DESIRED_SSID 0xFC02 //[STA] Service Set identification for connection and scan - -#define CFG_GROUP_ADDR 0xFC80 //[STA] Multicast MAC Addresses for Rx-message -#define CFG_CREATE_IBSS 0xFC81 //[STA] Switch for IBSS creation On/Off -#define CFG_RTS_THRH 0xFC83 //Frame length used for RTS/CTS handshake -#define CFG_TX_RATE_CNTL 0xFC84 //[STA] Data rate control for message transmission -#define CFG_PROMISCUOUS_MODE 0xFC85 //[STA] Switch for Promiscuous mode reception On/Off -#define CFG_WOL 0xFC86 //[STA] Switch for Wake-On-LAN mode -#define CFG_WOL_PATTERNS 0xFC87 //[STA] Patterns for Wake-On-LAN -#define CFG_SUPPORTED_RATE_SET_CNTL 0xFC88 // -#define CFG_BASIC_RATE_SET_CNTL 0xFC89 // - -#define CFG_SOFTWARE_ACK_MODE 0xFC90 // -#define CFG_RTS_THRH0 0xFC97 //[AP] Port 0 frame length for RTS/CTS handshake -#define CFG_RTS_THRH1 0xFC98 //[AP] Port 1 frame length for RTS/CTS handshake -#define CFG_RTS_THRH2 0xFC99 //[AP] Port 2 frame length for RTS/CTS handshake -#define CFG_RTS_THRH3 0xFC9A //[AP] Port 3 frame length for RTS/CTS handshake -#define CFG_RTS_THRH4 0xFC9B //[AP] Port 4 frame length for RTS/CTS handshake -#define CFG_RTS_THRH5 0xFC9C //[AP] Port 5 frame length for RTS/CTS handshake -#define CFG_RTS_THRH6 0xFC9D //[AP] Port 6 frame length for RTS/CTS handshake - -#define CFG_TX_RATE_CNTL0 0xFC9E //[AP] Port 0 data rate control for transmission -#define CFG_TX_RATE_CNTL1 0xFC9F //[AP] Port 1 data rate control for transmission -#define CFG_TX_RATE_CNTL2 0xFCA0 //[AP] Port 2 data rate control for transmission -#define CFG_TX_RATE_CNTL3 0xFCA1 //[AP] Port 3 data rate control for transmission -#define CFG_TX_RATE_CNTL4 0xFCA2 //[AP] Port 4 data rate control for transmission -#define CFG_TX_RATE_CNTL5 0xFCA3 //[AP] Port 5 data rate control for transmission -#define CFG_TX_RATE_CNTL6 0xFCA4 //[AP] Port 6 data rate control for transmission - -#define CFG_DEFAULT_KEYS 0xFCB0 //defines set of encryption keys -#define CFG_TX_KEY_ID 0xFCB1 //select key for encryption of Tx messages -#define CFG_SCAN_SSID 0xFCB2 //Scan SSID -#define CFG_ADD_TKIP_DEFAULT_KEY 0xFCB4 //set KeyID and TxKey indication -#define KEY_ID 0x0003 //KeyID mask for tkip_key_id_info field -#define TX_KEY 0x8000 //Default Tx Key flag of tkip_key_id_info field -#define CFG_SET_WPA_AUTH_KEY_MGMT_SUITE 0xFCB5 //Authenticated Key Management Suite -#define CFG_REMOVE_TKIP_DEFAULT_KEY 0xFCB6 //invalidate KeyID and TxKey indication -#define CFG_ADD_TKIP_MAPPED_KEY 0xFCB7 //set MAC address pairwise station -#define CFG_REMOVE_TKIP_MAPPED_KEY 0xFCB8 //invalidate MAC address pairwise station -#define CFG_SET_WPA_CAPABILITIES_INFO 0xFCB9 //WPA Capabilities -#define CFG_CACHED_PMK_ADDR 0xFCBA //set MAC address of pre-authenticated AP -#define CFG_REMOVE_CACHED_PMK_ADDR 0xFCBB //invalidate MAC address of pre-authenticated AP -#define CFG_FCBC 0xFCBC //FW codes ahead of available documentation, so ??????? -#define CFG_FCBD 0xFCBD //FW codes ahead of available documentation, so ??????? -#define CFG_FCBE 0xFCBE //FW codes ahead of available documentation, so ??????? -#define CFG_FCBF 0xFCBF //FW codes ahead of available documentation, so ??????? - -#define CFG_HANDOVER_ADDR 0xFCC0 //[AP] Station MAC Address re-associated with other AP -#define CFG_SCAN_CHANNEL 0xFCC2 //Channel set for host requested scan -//;?#define CFG_SCAN_CHANNEL_MASK 0xFCC2 // contains -#define CFG_DISASSOCIATE_ADDR 0xFCC4 //[AP] Station MAC Address to be disassociated -#define CFG_PROBE_DATA_RATE 0xFCC5 //WARP connection control -#define CFG_FRAME_BURST_LIMIT 0xFCC6 // -#define CFG_COEXISTENSE_BEHAVIOUR 0xFCC7 //[AP] -#define CFG_DEAUTHENTICATE_ADDR 0xFCC8 //MAC address of Station to be deauthenticated - -// BEHAVIOR PARAMETERS -#define CFG_TICK_TIME 0xFCE0 //Auxiliary Timer tick interval -#define CFG_DDS_TICK_TIME 0xFCE1 //Disconnected DeepSleep Timer tick interval -//#define CFG_CNF_COUNTRY 0xFCFE apparently not needed ;? -#define CFG_RID_CFG_MAX 0xFCFF //highest value representing an Configuration RID - - -/*============================================================= INFORMATION RECORDS =====================*/ +#endif /* BEAGLE_HII5 */ + +/* NETWORK PARAMETERS, DYNAMIC CONFIGURATION ENTITIES */ +#define CFG_DESIRED_SSID 0xFC02/* [STA] Service Set identification for connection and scan */ + +#define CFG_GROUP_ADDR 0xFC80/* [STA] Multicast MAC Addresses for Rx-message */ +#define CFG_CREATE_IBSS 0xFC81/* [STA] Switch for IBSS creation On/Off */ +#define CFG_RTS_THRH 0xFC83/* Frame length used for RTS/CTS handshake */ +#define CFG_TX_RATE_CNTL 0xFC84/* [STA] Data rate control for message transmission */ +#define CFG_PROMISCUOUS_MODE 0xFC85/* [STA] Switch for Promiscuous mode reception On/Off */ +#define CFG_WOL 0xFC86/* [STA] Switch for Wake-On-LAN mode */ +#define CFG_WOL_PATTERNS 0xFC87/* [STA] Patterns for Wake-On-LAN */ +#define CFG_SUPPORTED_RATE_SET_CNTL 0xFC88 +#define CFG_BASIC_RATE_SET_CNTL 0xFC89 + +#define CFG_SOFTWARE_ACK_MODE 0xFC90 +#define CFG_RTS_THRH0 0xFC97/* [AP] Port 0 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH1 0xFC98/* [AP] Port 1 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH2 0xFC99/* [AP] Port 2 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH3 0xFC9A/* [AP] Port 3 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH4 0xFC9B/* [AP] Port 4 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH5 0xFC9C/* [AP] Port 5 frame length for RTS/CTS handshake */ +#define CFG_RTS_THRH6 0xFC9D/* [AP] Port 6 frame length for RTS/CTS handshake */ + +#define CFG_TX_RATE_CNTL0 0xFC9E/* [AP] Port 0 data rate control for transmission */ +#define CFG_TX_RATE_CNTL1 0xFC9F/* [AP] Port 1 data rate control for transmission */ +#define CFG_TX_RATE_CNTL2 0xFCA0/* [AP] Port 2 data rate control for transmission */ +#define CFG_TX_RATE_CNTL3 0xFCA1/* [AP] Port 3 data rate control for transmission */ +#define CFG_TX_RATE_CNTL4 0xFCA2/* [AP] Port 4 data rate control for transmission */ +#define CFG_TX_RATE_CNTL5 0xFCA3/* [AP] Port 5 data rate control for transmission */ +#define CFG_TX_RATE_CNTL6 0xFCA4/* [AP] Port 6 data rate control for transmission */ + +#define CFG_DEFAULT_KEYS 0xFCB0/* defines set of encryption keys */ +#define CFG_TX_KEY_ID 0xFCB1/* select key for encryption of Tx messages */ +#define CFG_SCAN_SSID 0xFCB2/* Scan SSID */ +#define CFG_ADD_TKIP_DEFAULT_KEY 0xFCB4/* set KeyID and TxKey indication */ +#define KEY_ID 0x0003/* KeyID mask for tkip_key_id_info field */ +#define TX_KEY 0x8000/* Default Tx Key flag of tkip_key_id_info field */ +#define CFG_SET_WPA_AUTH_KEY_MGMT_SUITE 0xFCB5/* Authenticated Key Management Suite */ +#define CFG_REMOVE_TKIP_DEFAULT_KEY 0xFCB6/* invalidate KeyID and TxKey indication */ +#define CFG_ADD_TKIP_MAPPED_KEY 0xFCB7/* set MAC address pairwise station */ +#define CFG_REMOVE_TKIP_MAPPED_KEY 0xFCB8/* invalidate MAC address pairwise station */ +#define CFG_SET_WPA_CAPABILITIES_INFO 0xFCB9/* WPA Capabilities */ +#define CFG_CACHED_PMK_ADDR 0xFCBA/* set MAC address of pre-authenticated AP */ +#define CFG_REMOVE_CACHED_PMK_ADDR 0xFCBB/* invalidate MAC address of pre-authenticated AP */ +#define CFG_FCBC 0xFCBC/* FW codes ahead of available documentation, so ??????? */ +#define CFG_FCBD 0xFCBD/* FW codes ahead of available documentation, so ??????? */ +#define CFG_FCBE 0xFCBE/* FW codes ahead of available documentation, so ??????? */ +#define CFG_FCBF 0xFCBF/* FW codes ahead of available documentation, so ??????? */ + +#define CFG_HANDOVER_ADDR 0xFCC0/* [AP] Station MAC Address re-associated with other AP */ +#define CFG_SCAN_CHANNEL 0xFCC2/* Channel set for host requested scan */ +/*;?#define CFG_SCAN_CHANNEL_MASK 0xFCC2 */ /* contains */ +#define CFG_DISASSOCIATE_ADDR 0xFCC4/* [AP] Station MAC Address to be disassociated */ +#define CFG_PROBE_DATA_RATE 0xFCC5/* WARP connection control */ +#define CFG_FRAME_BURST_LIMIT 0xFCC6 +#define CFG_COEXISTENSE_BEHAVIOUR 0xFCC7/* [AP] */ +#define CFG_DEAUTHENTICATE_ADDR 0xFCC8/* MAC address of Station to be deauthenticated */ + +/* BEHAVIOR PARAMETERS */ +#define CFG_TICK_TIME 0xFCE0/* Auxiliary Timer tick interval */ +#define CFG_DDS_TICK_TIME 0xFCE1/* Disconnected DeepSleep Timer tick interval */ +/*#define CFG_CNF_COUNTRY 0xFCFE */ /* apparently not needed ;? */ +#define CFG_RID_CFG_MAX 0xFCFF/* highest value representing an Configuration RID */ + + +/*============================================================= INFORMATION RECORDS =====================*/ /*============================================================= mask 0xFDxx =====================*/ -// NIC INFORMATION -#define CFG_RID_INF_MIN 0xFD00 //lowest value representing an Information RID -#define CFG_MAX_LOAD_TIME 0xFD00 //[INT] Maximum response time of the Download command. -#define CFG_DL_BUF 0xFD01 //[INT] Download buffer location and size. -#define CFG_PRI_IDENTITY 0xFD02 //[PRI] Primary Functions firmware identification. -#define CFG_PRI_SUP_RANGE 0xFD03 //[PRI] Primary Functions I/F Supplier compatibility range. -#define CFG_NIC_HSI_SUP_RANGE 0xFD09 //H/W - S/W I/F supplier range -#define CFG_NIC_SERIAL_NUMBER 0xFD0A //[PRI] Network Interface Card serial number. -#define CFG_NIC_IDENTITY 0xFD0B //[PRI] Network Interface Card identification. -#define CFG_NIC_MFI_SUP_RANGE 0xFD0C //[PRI] Modem I/F Supplier compatibility range. -#define CFG_NIC_CFI_SUP_RANGE 0xFD0D //[PRI] Controller I/F Supplier compatibility range. -#define CFG_CHANNEL_LIST 0xFD10 //Allowed communication channels. -#define CFG_NIC_TEMP_TYPE 0xFD12 //Hardware temperature range code. -#define CFG_CIS 0xFD13 //PC Card Standard Card Information Structure -#define CFG_NIC_PROFILE 0xFD14 //Card Profile -#define CFG_FW_IDENTITY 0xFD20 //firmware identification. -#define CFG_FW_SUP_RANGE 0xFD21 //firmware Supplier compatibility range. -#define CFG_MFI_ACT_RANGES_STA 0xFD22 //[STA] Modem I/F Actor compatibility ranges. -#define CFG_CFI_ACT_RANGES_STA 0xFD23 //[STA] Controller I/F Actor compatibility ranges. -#define CFG_NIC_BUS_TYPE 0xFD24 //Card Bustype -#define CFG_NIC_BUS_TYPE_PCCARD_CF 0x0000 //16 bit PC Card or Compact Flash -#define CFG_NIC_BUS_TYPE_USB 0x0001 //USB -#define CFG_NIC_BUS_TYPE_CARDBUS 0x0002 //CardBus -#define CFG_NIC_BUS_TYPE_PCI 0x0003 //(mini)PCI -#define CFG_DOMAIN_CODE 0xFD25 - -// MAC INFORMATION -#define CFG_PORT_STAT 0xFD40 //Actual MAC Port connection control status -#define CFG_CUR_SSID 0xFD41 //[STA] Identification of the actually connected SS -#define CFG_CUR_BSSID 0xFD42 //[STA] Identification of the actually connected BSS -#define CFG_COMMS_QUALITY 0xFD43 //[STA] Quality of the Basic Service Set connection -#define CFG_CUR_TX_RATE 0xFD44 //[STA] Actual transmit data rate -#define CFG_CUR_BEACON_INTERVAL 0xFD45 //Beacon transmit interval time for BSS creation -#define CFG_CUR_SCALE_THRH 0xFD46 //Actual System Scale thresholds settings -#define CFG_PROTOCOL_RSP_TIME 0xFD47 //Max time to await a response to a request message -#define CFG_CUR_SHORT_RETRY_LIMIT 0xFD48 //Max number of transmit attempts for short frames -#define CFG_CUR_LONG_RETRY_LIMIT 0xFD49 //Max number of transmit attempts for long frames -#define CFG_MAX_TX_LIFETIME 0xFD4A //Max transmit frame handling duration -#define CFG_MAX_RX_LIFETIME 0xFD4B //Max received frame handling duration -#define CFG_CF_POLLABLE 0xFD4C //[STA] Contention Free pollable capability indication -#define CFG_AUTHENTICATION_ALGORITHMS 0xFD4D //Available Authentication Algorithms indication -#define CFG_PRIVACY_OPT_IMPLEMENTED 0xFD4F //WEP Option availability indication - -#define CFG_CUR_REMOTE_RATES 0xFD50 //[STA] CurrentRemoteRates -#define CFG_CUR_USED_RATES 0xFD51 //[STA] CurrentUsedRates -#define CFG_CUR_SYSTEM_SCALE 0xFD52 //[STA] CurrentSystemScale - -#define CFG_CUR_TX_RATE1 0xFD80 //[AP] Actual Port 1 transmit data rate -#define CFG_CUR_TX_RATE2 0xFD81 //[AP] Actual Port 2 transmit data rate -#define CFG_CUR_TX_RATE3 0xFD82 //[AP] Actual Port 3 transmit data rate -#define CFG_CUR_TX_RATE4 0xFD83 //[AP] Actual Port 4 transmit data rate -#define CFG_CUR_TX_RATE5 0xFD84 //[AP] Actual Port 5 transmit data rate -#define CFG_CUR_TX_RATE6 0xFD85 //[AP] Actual Port 6 transmit data rate -#define CFG_NIC_MAC_ADDR 0xFD86 //Unique local node MAC Address -#define CFG_PCF_INFO 0xFD87 //[AP] Point Coordination Function capability info -//*RESERVED* #define CFG_HIGHEST_BASIC_RATE 0xFD88 // -#define CFG_CUR_COUNTRY_INFO 0xFD89 // -#define CFG_CUR_WPA_INFO_ELEMENT 0xFD8A // -#define CFG_CUR_TKIP_IV_INFO 0xFD8B // -#define CFG_CUR_ASSOC_REQ_INFO 0xFD8C // -#define CFG_CUR_ASSOC_RESP_INFO 0xFD8D // -#define CFG_CUR_LOAD 0xFD8E //[AP] current load on AP's channel - -#define CFG_SECURITY_CAPABILITIES 0xFD90 //Combined capabilities information - -// MODEM INFORMATION -#define CFG_PHY_TYPE 0xFDC0 //Physical layer type indication -#define CFG_CUR_CHANNEL 0xFDC1 //Actual frequency channel used for transmission -#define CFG_CUR_POWER_STATE 0xFDC2 //Actual power consumption status -#define CFG_CCA_MODE 0xFDC3 //Clear channel assessment mode indication -#define CFG_SUPPORTED_DATA_RATES 0xFDC6 //Data rates capability information - -#define CFG_RID_INF_MAX 0xFDFF //highest value representing an Information RID - -// ENGINEERING INFORMATION -#define CFG_RID_ENG_MIN 0xFFE0 //lowest value representing a Hermes engineering RID +/* NIC INFORMATION */ +#define CFG_RID_INF_MIN 0xFD00/* lowest value representing an Information RID */ +#define CFG_MAX_LOAD_TIME 0xFD00/* [INT] Maximum response time of the Download command. */ +#define CFG_DL_BUF 0xFD01/* [INT] Download buffer location and size. */ +#define CFG_PRI_IDENTITY 0xFD02/* [PRI] Primary Functions firmware identification. */ +#define CFG_PRI_SUP_RANGE 0xFD03/* [PRI] Primary Functions I/F Supplier compatibility range. */ +#define CFG_NIC_HSI_SUP_RANGE 0xFD09/* H/W - S/W I/F supplier range */ +#define CFG_NIC_SERIAL_NUMBER 0xFD0A/* [PRI] Network Interface Card serial number. */ +#define CFG_NIC_IDENTITY 0xFD0B/* [PRI] Network Interface Card identification. */ +#define CFG_NIC_MFI_SUP_RANGE 0xFD0C/* [PRI] Modem I/F Supplier compatibility range. */ +#define CFG_NIC_CFI_SUP_RANGE 0xFD0D/* [PRI] Controller I/F Supplier compatibility range. */ +#define CFG_CHANNEL_LIST 0xFD10/* Allowed communication channels. */ +#define CFG_NIC_TEMP_TYPE 0xFD12/* Hardware temperature range code. */ +#define CFG_CIS 0xFD13/* PC Card Standard Card Information Structure */ +#define CFG_NIC_PROFILE 0xFD14/* Card Profile */ +#define CFG_FW_IDENTITY 0xFD20/* firmware identification. */ +#define CFG_FW_SUP_RANGE 0xFD21/* firmware Supplier compatibility range. */ +#define CFG_MFI_ACT_RANGES_STA 0xFD22/* [STA] Modem I/F Actor compatibility ranges. */ +#define CFG_CFI_ACT_RANGES_STA 0xFD23/* [STA] Controller I/F Actor compatibility ranges. */ +#define CFG_NIC_BUS_TYPE 0xFD24/* Card Bustype */ +#define CFG_NIC_BUS_TYPE_PCCARD_CF 0x0000/* 16 bit PC Card or Compact Flash */ +#define CFG_NIC_BUS_TYPE_USB 0x0001/* USB */ +#define CFG_NIC_BUS_TYPE_CARDBUS 0x0002/* CardBus */ +#define CFG_NIC_BUS_TYPE_PCI 0x0003/* (mini)PCI */ +#define CFG_DOMAIN_CODE 0xFD25 + +/* MAC INFORMATION */ +#define CFG_PORT_STAT 0xFD40/* Actual MAC Port connection control status */ +#define CFG_CUR_SSID 0xFD41/* [STA] Identification of the actually connected SS */ +#define CFG_CUR_BSSID 0xFD42/* [STA] Identification of the actually connected BSS */ +#define CFG_COMMS_QUALITY 0xFD43/* [STA] Quality of the Basic Service Set connection */ +#define CFG_CUR_TX_RATE 0xFD44/* [STA] Actual transmit data rate */ +#define CFG_CUR_BEACON_INTERVAL 0xFD45/* Beacon transmit interval time for BSS creation */ +#define CFG_CUR_SCALE_THRH 0xFD46/* Actual System Scale thresholds settings */ +#define CFG_PROTOCOL_RSP_TIME 0xFD47/* Max time to await a response to a request message */ +#define CFG_CUR_SHORT_RETRY_LIMIT 0xFD48/* Max number of transmit attempts for short frames */ +#define CFG_CUR_LONG_RETRY_LIMIT 0xFD49/* Max number of transmit attempts for long frames */ +#define CFG_MAX_TX_LIFETIME 0xFD4A/* Max transmit frame handling duration */ +#define CFG_MAX_RX_LIFETIME 0xFD4B/* Max received frame handling duration */ +#define CFG_CF_POLLABLE 0xFD4C/* [STA] Contention Free pollable capability indication */ +#define CFG_AUTHENTICATION_ALGORITHMS 0xFD4D/* Available Authentication Algorithms indication */ +#define CFG_PRIVACY_OPT_IMPLEMENTED 0xFD4F/* WEP Option availability indication */ + +#define CFG_CUR_REMOTE_RATES 0xFD50/* [STA] CurrentRemoteRates */ +#define CFG_CUR_USED_RATES 0xFD51/* [STA] CurrentUsedRates */ +#define CFG_CUR_SYSTEM_SCALE 0xFD52/* [STA] CurrentSystemScale */ + +#define CFG_CUR_TX_RATE1 0xFD80/* [AP] Actual Port 1 transmit data rate */ +#define CFG_CUR_TX_RATE2 0xFD81/* [AP] Actual Port 2 transmit data rate */ +#define CFG_CUR_TX_RATE3 0xFD82/* [AP] Actual Port 3 transmit data rate */ +#define CFG_CUR_TX_RATE4 0xFD83/* [AP] Actual Port 4 transmit data rate */ +#define CFG_CUR_TX_RATE5 0xFD84/* [AP] Actual Port 5 transmit data rate */ +#define CFG_CUR_TX_RATE6 0xFD85/* [AP] Actual Port 6 transmit data rate */ +#define CFG_NIC_MAC_ADDR 0xFD86/* Unique local node MAC Address */ +#define CFG_PCF_INFO 0xFD87/* [AP] Point Coordination Function capability info */ +/* *RESERVED* #define CFG_HIGHEST_BASIC_RATE 0xFD88 */ +#define CFG_CUR_COUNTRY_INFO 0xFD89 +#define CFG_CUR_WPA_INFO_ELEMENT 0xFD8A +#define CFG_CUR_TKIP_IV_INFO 0xFD8B +#define CFG_CUR_ASSOC_REQ_INFO 0xFD8C +#define CFG_CUR_ASSOC_RESP_INFO 0xFD8D +#define CFG_CUR_LOAD 0xFD8E/* [AP] current load on AP's channel */ + +#define CFG_SECURITY_CAPABILITIES 0xFD90/* Combined capabilities information */ + +/* MODEM INFORMATION */ +#define CFG_PHY_TYPE 0xFDC0/* Physical layer type indication */ +#define CFG_CUR_CHANNEL 0xFDC1/* Actual frequency channel used for transmission */ +#define CFG_CUR_POWER_STATE 0xFDC2/* Actual power consumption status */ +#define CFG_CCA_MODE 0xFDC3/* Clear channel assessment mode indication */ +#define CFG_SUPPORTED_DATA_RATES 0xFDC6/* Data rates capability information */ + +#define CFG_RID_INF_MAX 0xFDFF/* highest value representing an Information RID */ + +/* ENGINEERING INFORMATION */ +#define CFG_RID_ENG_MIN 0xFFE0/* lowest value representing a Hermes engineering RID */ /****************************** General define *************************************************************/ -//IFB field related -// IFB_CardStat -#define CARD_STAT_INCOMP_PRI 0x2000U // no compatible HSI / primary F/W -#define CARD_STAT_INCOMP_FW 0x1000U // no compatible station / tertiary F/W -#define CARD_STAT_DEFUNCT 0x0100U // HCF is in Defunct mode -// IFB_RxStat -#define RX_STAT_PRIO 0x00E0U //Priority subfield -#define RX_STAT_ERR 0x000FU //Error mask -#define RX_STAT_UNDECR 0x0002U //Non-decryptable encrypted message -#define RX_STAT_FCS_ERR 0x0001U //FCS error - -// SNAP header for E-II Encapsulation -#define ENC_NONE 0xFF -#define ENC_1042 0x00 -#define ENC_TUNNEL 0xF8 +/* IFB field related */ +/* IFB_CardStat */ +#define CARD_STAT_INCOMP_PRI 0x2000U/* no compatible HSI / primary F/W */ +#define CARD_STAT_INCOMP_FW 0x1000U/* no compatible station / tertiary F/W */ +#define CARD_STAT_DEFUNCT 0x0100U/* HCF is in Defunct mode */ +/* IFB_RxStat */ +#define RX_STAT_PRIO 0x00E0U/* Priority subfield */ +#define RX_STAT_ERR 0x000FU/* Error mask */ +#define RX_STAT_UNDECR 0x0002U/* Non-decryptable encrypted message */ +#define RX_STAT_FCS_ERR 0x0001U/* FCS error */ + +/* SNAP header for E-II Encapsulation */ +#define ENC_NONE 0xFF +#define ENC_1042 0x00 +#define ENC_TUNNEL 0xF8/****************************** Xxxxxxxx *******************************************************************/ -#define HCF_SUCCESS 0x00 // OK -#define HCF_ERR_TIME_OUT 0x04 // Expected Hermes event did not occur in expected time +#define HCF_SUCCESS 0x00/* OK */ +#define HCF_ERR_TIME_OUT 0x04/* Expected Hermes event did not occur in expected time */ #define HCF_ERR_NO_NIC 0x05/* card not found (usually yanked away during hcfio_in_string -* Also: card is either absent or disabled while it should be neither */ -#define HCF_ERR_LEN 0x08/* buffer size insufficient -* - IFB_ConfigTable too small -* - hcf_get_info buffer has a size of 0 or 1 or less than needed -* to accommodate all data -* - hcf_put_info: CFG_DLNV_DATA exceeds intermediate -* buffer size */ -#define HCF_ERR_INCOMP_PRI 0x09 // primary functions are not compatible -#define HCF_ERR_INCOMP_FW 0x0A // station functions are compatible -#define HCF_ERR_MIC 0x0D // MIC check fails -#define HCF_ERR_SLEEP 0x0E // NIC in sleep mode -#define HCF_ERR_MAX 0x3F/* end of HCF range -*** ** *** ****** *** *************** */ -#define HCF_ERR_DEFUNCT 0x80 // BIT, reflecting that the HCF is in defunct mode (bits 0x7F reflect cause) -#define HCF_ERR_DEFUNCT_AUX 0x82 // Timeout on acknowledgement on en/disabling AUX registers -#define HCF_ERR_DEFUNCT_TIMER 0x83 // Timeout on timer calibration during initialization process -#define HCF_ERR_DEFUNCT_TIME_OUT 0x84 // Timeout on Busy bit drop during BAP setup -#define HCF_ERR_DEFUNCT_CMD_SEQ 0x86 // Hermes and HCF are out of sync in issuing/processing commands - -#define HCF_INT_PENDING 0x01 // return status of hcf_act( HCF_ACT_INT_OFF ) - -#define HCF_PORT_0 0x0000 // Station supports only single MAC Port -#define HCF_PORT_1 0x0100 // HCF_PORT_1 through HCF_PORT_6 are only supported by AP F/W -#define HCF_PORT_2 0x0200 -#define HCF_PORT_3 0x0300 -#define HCF_PORT_4 0x0400 -#define HCF_PORT_5 0x0500 -#define HCF_PORT_6 0x0600 +* Also: card is either absent or disabled while it should be neither */ +#define HCF_ERR_LEN 0x08/* buffer size insufficient +* - IFB_ConfigTable too small +* - hcf_get_info buffer has a size of 0 or 1 or less than needed +* to accommodate all data +* - hcf_put_info: CFG_DLNV_DATA exceeds intermediate +* buffer size */ +#define HCF_ERR_INCOMP_PRI 0x09/* primary functions are not compatible */ +#define HCF_ERR_INCOMP_FW 0x0A/* station functions are compatible */ +#define HCF_ERR_MIC 0x0D/* MIC check fails */ +#define HCF_ERR_SLEEP 0x0E/* NIC in sleep mode */ +#define HCF_ERR_MAX 0x3F/* end of HCF range +*** ** *** ****** *** *************** */ +#define HCF_ERR_DEFUNCT 0x80/* BIT, reflecting that the HCF is in defunct mode (bits 0x7F reflect cause) */ +#define HCF_ERR_DEFUNCT_AUX 0x82/* Timeout on acknowledgement on en/disabling AUX registers */ +#define HCF_ERR_DEFUNCT_TIMER 0x83/* Timeout on timer calibration during initialization process */ +#define HCF_ERR_DEFUNCT_TIME_OUT 0x84/* Timeout on Busy bit drop during BAP setup */ +#define HCF_ERR_DEFUNCT_CMD_SEQ 0x86/* Hermes and HCF are out of sync in issuing/processing commands */ + +#define HCF_INT_PENDING 0x01/* return status of hcf_act( HCF_ACT_INT_OFF ) */ + +#define HCF_PORT_0 0x0000/* Station supports only single MAC Port */ +#define HCF_PORT_1 0x0100/* HCF_PORT_1 through HCF_PORT_6 are only supported by AP F/W */ +#define HCF_PORT_2 0x0200 +#define HCF_PORT_3 0x0300 +#define HCF_PORT_4 0x0400 +#define HCF_PORT_5 0x0500 +#define HCF_PORT_6 0x0600#define HCF_CNTL_ENABLE 0x01#define HCF_CNTL_DISABLE 0x02
@@ -881,16 +882,16 @@ XX1( CFG_SCAN, SCAN_RS_STRCT, scan_result[32] ) /*Scan results *#define HCF_CNTL_DISCONNECT 0x05#define HCF_CNTL_CONTINUE 0x07 -#define USE_DMA 0x0001 -#define USE_16BIT 0x0002 -#define DMA_ENABLED 0x8000 //weak name, it really means: F/W enabled and DMA selected +#define USE_DMA 0x0001 +#define USE_16BIT 0x0002 +#define DMA_ENABLED 0x8000/* weak name, it really means: F/W enabled and DMA selected */ -//#define HCF_DMA_FD_CNT (2*29) //size in bytes of one Tx/RxFS minus DA/SA -//;?the MSF ( H2PCI.C uses the next 2 mnemonics ) -#define HCF_DMA_RX_BUF1_SIZE (HFS_ADDR_DEST + 8) //extra bytes for LEN/SNAP if decapsulation -#define HCF_DMA_TX_BUF1_SIZE (HFS_ADDR_DEST + 2*6 + 8) //extra bytes for DA/SA/LEN/SNAP if encapsulation +/*#define HCF_DMA_FD_CNT (2*29) */ /* size in bytes of one Tx/RxFS minus DA/SA */ +/*;?the MSF ( H2PCI.C uses the next 2 mnemonics ) */ +#define HCF_DMA_RX_BUF1_SIZE (HFS_ADDR_DEST + 8)/* extra bytes for LEN/SNAP if decapsulation */ +#define HCF_DMA_TX_BUF1_SIZE (HFS_ADDR_DEST + 2*6 + 8)/* extra bytes for DA/SA/LEN/SNAP if encapsulation */ -//HFS_TX_CNTL +/* HFS_TX_CNTL */ /* Note that the HCF_.... System Constants influence the HFS_.... values below * H-I H-I | H-II H-II H-II.5 * WPA | WPA
@@ -913,243 +914,243 @@ XX1( CFG_SCAN, SCAN_RS_STRCT, scan_result[32] ) /*Scan results ** note: () indicate bits which are supposedly never ever used in a WCI environment * note: ? denote bits which seem not to be documented in the documents I have available */ -//H-I: HCF_TX_CNTL_MASK 0x47FE //TX_DELAY, MACPort, Priority, (StrucType), TxEx, TxOK -//H-I WPA: HCF_TX_CNTL_MASK 0x5FE6 //TX_DELAY, MICKey, MACPort, Priority, (StrucType), TxEx, TxOK +/* H-I: HCF_TX_CNTL_MASK 0x47FE */ /* TX_DELAY, MACPort, Priority, (StrucType), TxEx, TxOK */ +/* H-I WPA: HCF_TX_CNTL_MASK 0x5FE6 */ /* TX_DELAY, MICKey, MACPort, Priority, (StrucType), TxEx, TxOK */ #if (HCF_TYPE ) &HCF_TYPE_WARP -#define HCF_TX_CNTL_MASK 0x27E7 //no TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink -//#elif (HCF_TYPE) & HCF_TYPE_WPA -//#define HCF_TX_CNTL_MASK 0x7F06 //TX_DELAY, CKIP?, MICKeyID, MACPort, [MIC],TxEx, TxOK (TAR419D7) +#define HCF_TX_CNTL_MASK 0x27E7/* no TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink */ +/*#elif (HCF_TYPE) & HCF_TYPE_WPA */ +/*#define HCF_TX_CNTL_MASK 0x7F06 */ /* TX_DELAY, CKIP?, MICKeyID, MACPort, [MIC],TxEx, TxOK (TAR419D7) */ #else -#define HCF_TX_CNTL_MASK 0x67E7 //TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink -#endif // HCF_TYPE_WARP +#define HCF_TX_CNTL_MASK 0x67E7/* TX_DELAY?, CCX, MACPort, Priority, (StrucType), TxEx, TxOK, Spectralink */ +#endif /* HCF_TYPE_WARP */ #define HFS_TX_CNTL_TX_EX 0x0004U#if (HCF_TYPE ) &HCF_TYPE_WPA -#define HFS_TX_CNTL_MIC 0x0010U //802.3 format with TKIP ;?changes to 0x0008 for H-II -#define HFS_TX_CNTL_MIC_KEY_ID 0x1800U //MIC Key ID subfield -#endif // HCF_TYPE_WPA +#define HFS_TX_CNTL_MIC 0x0010U/* 802.3 format with TKIP ;?changes to 0x0008 for H-II */ +#define HFS_TX_CNTL_MIC_KEY_ID 0x1800U/* MIC Key ID subfield */ +#endif /* HCF_TYPE_WPA */ -#define HFS_TX_CNTL_PORT 0x0700U //Port subfield of TxControl field of Transmit Frame Structure +#define HFS_TX_CNTL_PORT 0x0700U/* Port subfield of TxControl field of Transmit Frame Structure */ #if (HCF_TYPE ) &HCF_TYPE_CCX -#define HFS_TX_CNTL_CKIP 0x2000U //CKIP encrypted flag -#endif // HCF_TYPE_CCX +#define HFS_TX_CNTL_CKIP 0x2000U/* CKIP encrypted flag */ +#endif /* HCF_TYPE_CCX */ #if (HCF_TYPE ) &HCF_TYPE_TX_DELAY -#define HFS_TX_CNTL_TX_DELAY 0x4000U //decouple "put data" and send -#endif // HCF_TYPE_TX_DELAY -#define HFS_TX_CNTL_TX_CONT 0x4000u //engineering: continuous transmit +#define HFS_TX_CNTL_TX_DELAY 0x4000U/* decouple "put data" and send */ +#endif /* HCF_TYPE_TX_DELAY */ +#define HFS_TX_CNTL_TX_CONT 0x4000u/* engineering: continuous transmit */ /*============================================================= HCF Defined RECORDS =========================*/ -#define CFG_PROD_DATA 0x0800 //Plug Data (Engineering Test purposes only) -#define CFG_DL_EEPROM 0x0806 //Up/Download I2PROM for USB -#define CFG_PDA 0x0002 //Download PDA -#define CFG_MEM_I2PROM 0x0004 //Up/Download EEPROM +#define CFG_PROD_DATA 0x0800/* Plug Data (Engineering Test purposes only) */ +#define CFG_DL_EEPROM 0x0806/* Up/Download I2PROM for USB */ +#define CFG_PDA 0x0002/* Download PDA */ +#define CFG_MEM_I2PROM 0x0004/* Up/Download EEPROM */ -#define CFG_MEM_READ 0x0000 -#define CFG_MEM_WRITE 0x0001 +#define CFG_MEM_READ 0x0000 +#define CFG_MEM_WRITE 0x0001 -#define CFG_NULL 0x0820 //Empty Mail Box Info Block -#define CFG_MB_INFO 0x0820 //Mail Box Info Block -#define CFG_WMP 0x0822 //WaveLAN Management Protocol +#define CFG_NULL 0x0820/* Empty Mail Box Info Block */ +#define CFG_MB_INFO 0x0820/* Mail Box Info Block */ +#define CFG_WMP 0x0822/* WaveLAN Management Protocol */ #if definedMSF_COMPONENT_ID -#define CFG_DRV_INFO 0x0825 //Driver Information structure (see CFG_DRV_INFO_STRCT for details) -#define CFG_DRV_IDENTITY 0x0826 //driver identity (see CFG_DRV_IDENTITY_STRCT for details) -#define CFG_DRV_SUP_RANGE 0x0827 //Supplier range of driver - utility I/F -#define CFG_DRV_ACT_RANGES_PRI 0x0828 //(Acceptable) Actor range for Primary Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA 0x0829 //(Acceptable) Actor range for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_HSI 0x082A //(Acceptable) Actor range for H/W - driver I/F -#define CFG_DRV_ACT_RANGES_APF 0x082B //(Acceptable) Actor range for AP Firmware - driver I/F -#define CFG_HCF_OPT 0x082C //HCF (Compile time) options -#endif // MSF_COMPONENT_ID - -#define CFG_REG_MB 0x0830 //Register Mail Box -#define CFG_MB_ASSERT 0x0831 //Assert information -#define CFG_REG_ASSERT_RTNP 0x0832 //(de-)register MSF Assert Callback routine +#define CFG_DRV_INFO 0x0825/* Driver Information structure (see CFG_DRV_INFO_STRCT for details) */ +#define CFG_DRV_IDENTITY 0x0826/* driver identity (see CFG_DRV_IDENTITY_STRCT for details) */ +#define CFG_DRV_SUP_RANGE 0x0827/* Supplier range of driver - utility I/F */ +#define CFG_DRV_ACT_RANGES_PRI 0x0828/* (Acceptable) Actor range for Primary Firmware - driver I/F */ +#define CFG_DRV_ACT_RANGES_STA 0x0829/* (Acceptable) Actor range for Station Firmware - driver I/F */ +#define CFG_DRV_ACT_RANGES_HSI 0x082A/* (Acceptable) Actor range for H/W - driver I/F */ +#define CFG_DRV_ACT_RANGES_APF 0x082B/* (Acceptable) Actor range for AP Firmware - driver I/F */ +#define CFG_HCF_OPT 0x082C/* HCF (Compile time) options */ +#endif /* MSF_COMPONENT_ID */ + +#define CFG_REG_MB 0x0830/* Register Mail Box */ +#define CFG_MB_ASSERT 0x0831/* Assert information */ +#define CFG_REG_ASSERT_RTNP 0x0832/* (de-)register MSF Assert Callback routine */ #if (HCF_EXT ) &HCF_EXT_INFO_LOG -#define CFG_REG_INFO_LOG 0x0839 //(de-)register Info frames to Log -#endif // HCF_INFO_LOG -#define CFG_CNTL_OPT 0x083A //Control options +#define CFG_REG_INFO_LOG 0x0839/* (de-)register Info frames to Log */ +#endif /* HCF_INFO_LOG */ +#define CFG_CNTL_OPT 0x083A/* Control options */ -#define CFG_PROG 0x0857 //Program NIC memory -#define CFG_PROG_STOP 0x0000 -#define CFG_PROG_VOLATILE 0x0100 -//#define CFG_PROG_FLASH 0x0300 //restore if H-II non-volatile is introduced -//#define CFG_PROG_SEEPROM 0x1300 //restore if H-II non-volatile is introduced -#define CFG_PROG_SEEPROM_READBACK 0x0400 +#define CFG_PROG 0x0857/* Program NIC memory */ +#define CFG_PROG_STOP 0x0000 +#define CFG_PROG_VOLATILE 0x0100 +/*#define CFG_PROG_FLASH 0x0300 */ /* restore if H-II non-volatile is introduced */ +/*#define CFG_PROG_SEEPR 0x1300 */ /* restore if H-II non-volatile is introduced */ +#define CFG_PROG_SEEPROM_READBACK 0x0400 -#define CFG_FW_PRINTF 0x0858 //Related to firmware debug printf functionality -#define CFG_FW_PRINTF_BUFFER_LOCATION 0x0859 //Also related to firmware debug printf functionality +#define CFG_FW_PRINTF 0x0858/* Related to firmware debug printf functionality */ +#define CFG_FW_PRINTF_BUFFER_LOCATION 0x0859/* Also related to firmware debug printf functionality */ -#define CFG_CMD_NIC 0x0860 //Hermes Engineering command -#define CFG_CMD_HCF 0x0863 //HCF Engineering command -#define CFG_CMD_HCF_REG_ACCESS 0x0000 //Direct register access -#define CFG_CMD_HCF_RX_MON 0x0001 //Rx-monitor +#define CFG_CMD_NIC 0x0860/* Hermes Engineering command */ +#define CFG_CMD_HCF 0x0863/* HCF Engineering command */ +#define CFG_CMD_HCF_REG_ACCESS 0x0000/* Direct register access */ +#define CFG_CMD_HCF_RX_MON 0x0001/* Rx-monitor */ /*============================================================= MSF Defined RECORDS ========================*/ -#define CFG_ENCRYPT_STRING 0x0900 //transfer encryption info from CPL to MSF -#define CFG_AP_MODE 0x0901 //control mode of STAP driver from CPL -#define CFG_DRIVER_ENABLE 0x0902 //extend&export En-/Disable facility to Utility -#define CFG_PCI_COMMAND 0x0903 //PCI adapter (Ooievaar) structure -#define CFG_WOLAS_ENABLE 0x0904 //extend&export En-/Disable WOLAS facility to Utility -#define CFG_COUNTRY_STRING 0x0905 //transfer CountryInfo info from CPL to MSF -#define CFG_FW_DUMP 0x0906 //transfer nic memory to utility -#define CFG_POWER_MODE 0x0907 //controls the PM mode of the card -#define CFG_CONNECTION_MODE 0x0908 //controls the mode of the FW (ESS/AP/IBSS/ADHOC) -#define CFG_IFB 0x0909 //byte wise copy of IFB -#define CFG_MSF_TALLIES 0x090A //MSF tallies (int's, rx and tx) -#define CFG_CURRENT_LINK_STATUS 0x090B //Latest link status got through 0xF200 LinkEvent +#define CFG_ENCRYPT_STRING 0x0900/* transfer encryption info from CPL to MSF */ +#define CFG_AP_MODE 0x0901/* control mode of STAP driver from CPL */ +#define CFG_DRIVER_ENABLE 0x0902/* extend&export En-/Disable facility to Utility */ +#define CFG_PCI_COMMAND 0x0903/* PCI adapter (Ooievaar) structure */ +#define CFG_WOLAS_ENABLE 0x0904/* extend&export En-/Disable WOLAS facility to Utility */ +#define CFG_COUNTRY_STRING 0x0905/* transfer CountryInfo info from CPL to MSF */ +#define CFG_FW_DUMP 0x0906/* transfer nic memory to utility */ +#define CFG_POWER_MODE 0x0907/* controls the PM mode of the card */ +#define CFG_CONNECTION_MODE 0x0908/* controls the mode of the FW (ESS/AP/IBSS/ADHOC) */ +#define CFG_IFB 0x0909/* byte wise copy of IFB */ +#define CFG_MSF_TALLIES 0x090A/* MSF tallies (int's, rx and tx) */ +#define CFG_CURRENT_LINK_STATUS 0x090B/* Latest link status got through 0xF200 LinkEvent */ /*============================================================ INFORMATION FRAMES =========================*/ -#define CFG_INFO_FRAME_MIN 0xF000 //lowest value representing an Information Frame +#define CFG_INFO_FRAME_MIN 0xF000/* lowest value representing an Information Frame */ -#define CFG_TALLIES 0xF100 //Communications Tallies -#define CFG_SCAN 0xF101 //Scan results -#define CFG_PRS_SCAN 0xF102 //Probe Response Scan results +#define CFG_TALLIES 0xF100/* Communications Tallies */ +#define CFG_SCAN 0xF101/* Scan results */ +#define CFG_PRS_SCAN 0xF102/* Probe Response Scan results */ -#define CFG_LINK_STAT 0xF200 //Link Status +#define CFG_LINK_STAT 0xF200/* Link Status */ /* 1 through 5 are F/W defined values, produced by CFG_LINK_STAT frame * 1 through 5 are shared by CFG_LINK_STAT, IFB_LinkStat and IFB_DSLinkStat * 1 plays a double role as CFG_LINK_STAT_CONNECTED and as bit reflecting: * - connected: ON * - disconnected: OFF */ -#define CFG_LINK_STAT_CONNECTED 0x0001 -#define CFG_LINK_STAT_DISCONNECTED 0x0002 -#define CFG_LINK_STAT_AP_CHANGE 0x0003 -#define CFG_LINK_STAT_AP_OOR 0x0004 -#define CFG_LINK_STAT_AP_IR 0x0005 -#define CFG_LINK_STAT_FW 0x000F //mask to isolate F/W defined bits -//#define CFG_LINK_STAT_TIMER 0x0FF0 //mask to isolate OOR timer -//#define CFG_LINK_STAT_DS_OOR 0x2000 //2000 and up are IFB_LinkStat specific -//#define CFG_LINK_STAT_DS_IR 0x4000 -#define CFG_LINK_STAT_CHANGE 0x8000 -#define CFG_ASSOC_STAT 0xF201 //Association Status -#define CFG_SECURITY_STAT 0xF202 //Security Status -#define CFG_UPDATED_INFO_RECORD 0xF204 //Updated Info Record +#define CFG_LINK_STAT_CONNECTED 0x0001 +#define CFG_LINK_STAT_DISCONNECTED 0x0002 +#define CFG_LINK_STAT_AP_CHANGE 0x0003 +#define CFG_LINK_STAT_AP_OOR 0x0004 +#define CFG_LINK_STAT_AP_IR 0x0005 +#define CFG_LINK_STAT_FW 0x000F/* mask to isolate F/W defined bits */ +/* #define CFG_LINK_STAT_TIMER 0x0FF0 */ /* mask to isolate OOR timer */ +/* #define CFG_LINK_STAT_DS_OOR 0x2000 */ /* 2000 and up are IFB_LinkStat specific */ +/* #define CFG_LINK_STAT_DS_IR 0x4000 */ +#define CFG_LINK_STAT_CHANGE 0x8000 +#define CFG_ASSOC_STAT 0xF201/* Association Status */ +#define CFG_SECURITY_STAT 0xF202/* Security Status */ +#define CFG_UPDATED_INFO_RECORD 0xF204/* Updated Info Record */ /*============================================================ CONFIGURATION RECORDS ======================*/ /***********************************************************************************************************/ /****************************** S T R U C T U R E D E F I N I T I O N S **********************************/ -//Quick&Dirty to get download for DOS ODI Hermes-II running typedef LTV_STRCT FAR * LTVP; -typedef LTV_STRCT FAR * LTVP; // i.s.o #define LTVP LTV_STRCT FAR * +/* Quick&Dirty to get download for DOS ODI Hermes-II running typedef LTV_STRCT FAR * LTVP; */ +typedef LTV_STRCT FAR *LTVP; /* i.s.o #define LTVP LTV_STRCT FAR * */ -#if definedWVLAN_42 || definedWVLAN_43 //;?keepup with legacy a little while longer (4aug2003) +#if definedWVLAN_42 || definedWVLAN_43 /*;?keepup with legacy a little while longer (4aug2003) */ typedef struct DUI_STRCT {/* "legacy", still used by WVLAN42/43, NDIS drivers use WLAPI */ void FAR *ifbp; /* Pointer to IFB* returned from MSF to USF by uil_connect -* passed from USF to MSF as a "magic cookie" by all other UIL function calls -*/ -hcf_16 stat;// status returned from MSF to USF -hcf_16 fun;// command code from USF to MSF +* passed from USF to MSF as a "magic cookie" by all other UIL function calls +*/ +hcf_16 stat;/* status returned from MSF to USF */ +hcf_16 fun;/* command code from USF to MSF */ LTV_STRCT ltv;/* LTV structure -*** during uil_put_info: -* the L, T and V-fields carry information from USF to MSF +*** during uil_put_info: +* the L, T and V-fields carry information from USF to MSF *** during uil_get_info: * the L and T fields carry information from USF to MSF * the L and V-fields carry information from MSF to USF -*/ +*/ }DUI_STRCT ; -typedef DUI_STRCT FAR * DUIP; -#endif //defined WVLAN_42 || defined WVLAN_43 //;?keepup with legacy a liitle while longer (4aug2003) - - -typedef struct CFG_CMD_NIC_STRCT {// CFG_CMD_NIC (0x0860) Hermes Engineering command -hcf_16 len;//default length of RID -hcf_16 typ;//RID identification as defined by Hermes -hcf_16 cmd;//Command code (0x003F) and control bits (0xFFC0) -hcf_16 parm0;//parameters for Hermes Param0 register -hcf_16 parm1;//parameters for Hermes Param1 register -hcf_16 parm2;//parameters for Hermes Param2 register -hcf_16 stat;//result code from Hermes Status register -hcf_16 resp0;//responses from Hermes Resp0 register -hcf_16 resp1;//responses from Hermes Resp1 register -hcf_16 resp2;//responses from Hermes Resp2 register -hcf_16 hcf_stat;//result code from cmd_exe routine -hcf_16 ifb_err_cmd;//IFB_ErrCmd -hcf_16 ifb_err_qualifier;//IFB_ErrQualifier +typedef DUI_STRCT FAR *DUIP; +#endif /* defined WVLAN_42 || defined WVLAN_43 */ /*;?keepup with legacy a liitle while longer (4aug2003) */ + + +typedef struct CFG_CMD_NIC_STRCT {/* CFG_CMD_NIC (0x0860) Hermes Engineering command */ +hcf_16 len;/* default length of RID */ +hcf_16 typ;/* RID identification as defined by Hermes */ +hcf_16 cmd;/* Command code (0x003F) and control bits (0xFFC0) */ +hcf_16 parm0;/* parameters for Hermes Param0 register */ +hcf_16 parm1;/* parameters for Hermes Param1 register */ +hcf_16 parm2;/* parameters for Hermes Param2 register */ +hcf_16 stat;/* result code from Hermes Status register */ +hcf_16 resp0;/* responses from Hermes Resp0 register */ +hcf_16 resp1;/* responses from Hermes Resp1 register */ +hcf_16 resp2;/* responses from Hermes Resp2 register */ +hcf_16 hcf_stat;/* result code from cmd_exe routine */ +hcf_16 ifb_err_cmd;/* IFB_ErrCmd */ +hcf_16 ifb_err_qualifier;/* IFB_ErrQualifier */ }CFG_CMD_NIC_STRCT ; -typedef struct CFG_DRV_INFO_STRCT {//CFG_DRV_INFO (0x0825) driver information -hcf_16 len;//default length of RID -hcf_16 typ;//RID identification as defined by Hermes -hcf_8 driver_name[8 ];//Driver name, 8 bytes, right zero padded -hcf_16 driver_version;//BCD 2 digit major and 2 digit minor driver version -hcf_16 HCF_version;//BCD 2 digit major and 2 digit minor HCF version -hcf_16 driver_stat;// -hcf_16 IO_address;//base IO address used by NIC -hcf_16 IO_range;//range of IO addresses used by NIC -hcf_16 IRQ_number;//Interrupt used by NIC -hcf_16 card_stat;/*NIC status -@* 0x8000 Card present -@* 0x4000 Card Enabled -@* 0x2000 Driver incompatible with NIC Primary Functions -@* 0x1000 Driver incompatible with NIC Station Functions */ -hcf_16 frame_type;/*Frame type -@* 0x000 802.3 -@* 0x008 802.11 */ -hcf_32 drv_info;/*driver specific info -* CE: virtual I/O base */ -}CFG_DRV_INFO_STRCT ; - -#define COMP_ID_FW_PRI 21 //Primary Functions Firmware -#define COMP_ID_FW_INTERMEDIATE 22 //Intermediate Functions Firmware -#define COMP_ID_FW_STA 31 //Station Functions Firmware -#define COMP_ID_FW_AP 32 //AP Functions Firmware -#define COMP_ID_FW_AP_FAKE 331 //AP Functions Firmware - -#define COMP_ID_MINIPORT_NDIS_31 41 //Windows 9x/NT Miniport NDIS 3.1 -#define COMP_ID_PACKET 42 //Packet -#define COMP_ID_ODI_16 43 //DOS ODI -#define COMP_ID_ODI_32 44 //32-bits ODI -#define COMP_ID_MAC_OS 45 //Macintosh OS -#define COMP_ID_WIN_CE 46 //Windows CE Miniport -//#define COMP_ID_LINUX_PD 47 //Linux, HCF-light based, MSF source code in Public Domain -#define COMP_ID_MINIPORT_NDIS_50 48 //Windows 9x/NT Miniport NDIS 5.0 -#define COMP_ID_LINUX 49/*Linux, GPL'ed HCF based, full source code in Public Domain -*thanks to Andreas Neuhaus */ -#define COMP_ID_QNX 50 //QNX -#define COMP_ID_MINIPORT_NDIS_50_USB 51 //Windows 9x/NT Miniport NDIS 4.0 -#define COMP_ID_MINIPORT_NDIS_40 52 //Windows 9x/NT Miniport NDIS 4.0 -#define COMP_ID_VX_WORKS_ENDSTA 53 // VxWorks END Station driver -#define COMP_ID_VX_WORKS_ENDAP 54 // VxWorks END Access Point driver -//;?#define COMP_ID_MAC_OS_???? 55 //;?check with HM -#define COMP_ID_VX_WORKS_END 56 // VxWorks END Station/Access Point driver -// 57 //NucleusOS@ARM Driver. -#define COMP_ID_WSU 63/* WaveLAN Station Firmware Update utility -* variant 1: Windows -* variant 2: DOS -*/ -#define COMP_ID_AP1 81 //WaveLAN/IEEE AP -#define COMP_ID_EC 83 //WaveLAN/IEEE Ethernet Converter -#define COMP_ID_UBL 87 //USB Boot Loader - -#define COMP_ROLE_SUPL 0x00 //supplier -#define COMP_ROLE_ACT 0x01 //actor - -//Supplier - actor -#define COMP_ID_MFI 0x01 //Modem - Firmware I/F -#define COMP_ID_CFI 0x02 //Controller - Firmware I/F -#define COMP_ID_PRI 0x03 //Primary Firmware - Driver I/F -#define COMP_ID_STA 0x04 //Station Firmware - Driver I/F -#define COMP_ID_DUI 0x05 //Driver - Utility I/F -#define COMP_ID_HSI 0x06 //H/W - Driver I/F -#define COMP_ID_DAI 0x07 //API - Driver I/F -#define COMP_ID_APF 0x08 //H/W - Driver I/F -#define COMP_ID_INT 0x09 //Intermediate FW - Driver I/F +typedef struct CFG_DRV_INFO_STRCT {/* CFG_DRV_INFO (0x0825) driver information */ +hcf_16 len;/* default length of RID */ +hcf_16 typ;/* RID identification as defined by Hermes */ +hcf_8 driver_name[8 ];/* Driver name, 8 bytes, right zero padded */ +hcf_16 driver_version;/* BCD 2 digit major and 2 digit minor driver version */ +hcf_16 HCF_version;/* BCD 2 digit major and 2 digit minor HCF version */ +hcf_16 driver_stat; +hcf_16 IO_address;/* base IO address used by NIC */ +hcf_16 IO_range;/* range of IO addresses used by NIC */ +hcf_16 IRQ_number;/* Interrupt used by NIC */ +hcf_16 card_stat;/*NIC status +@* 0x8000 Card present +@* 0x4000 Card Enabled +@* 0x2000 Driver incompatible with NIC Primary Functions +@* 0x1000 Driver incompatible with NIC Station Functions */ +hcf_16 frame_type;/*Frame type +@* 0x000 802.3 +@* 0x008 802.11 */ +hcf_32 drv_info;/*driver specific info +* CE: virtual I/O base */ +}CFG_DRV_INFO_STRCT ; + +#define COMP_ID_FW_PRI 21/* Primary Functions Firmware */ +#define COMP_ID_FW_INTERMEDIATE 22/* Intermediate Functions Firmware */ +#define COMP_ID_FW_STA 31/* Station Functions Firmware */ +#define COMP_ID_FW_AP 32/* AP Functions Firmware */ +#define COMP_ID_FW_AP_FAKE 331/* AP Functions Firmware */ + +#define COMP_ID_MINIPORT_NDIS_31 41/* Windows 9x/NT Miniport NDIS 3.1 */ +#define COMP_ID_PACKET 42/* Packet */ +#define COMP_ID_ODI_16 43/* DOS ODI */ +#define COMP_ID_ODI_32 44/* 32-bits ODI */ +#define COMP_ID_MAC_OS 45/* Macintosh OS */ +#define COMP_ID_WIN_CE 46/* Windows CE Miniport */ +/* #define COMP_ID_LINUX_PD 47 */ /* Linux, HCF-light based, MSF source code in Public Domain */ +#define COMP_ID_MINIPORT_NDIS_50 48/* Windows 9x/NT Miniport NDIS 5.0 */ +#define COMP_ID_LINUX 49/*Linux, GPL'ed HCF based, full source code in Public Domain +*thanks to Andreas Neuhaus */ +#define COMP_ID_QNX 50/* QNX */ +#define COMP_ID_MINIPORT_NDIS_50_USB 51/* Windows 9x/NT Miniport NDIS 4.0 */ +#define COMP_ID_MINIPORT_NDIS_40 52/* Windows 9x/NT Miniport NDIS 4.0 */ +#define COMP_ID_VX_WORKS_ENDSTA 53/* VxWorks END Station driver */ +#define COMP_ID_VX_WORKS_ENDAP 54/* VxWorks END Access Point driver */ +/*;?#define COMP_ID_MAC_OS_???? 55 */ /* ;?check with HM */ +#define COMP_ID_VX_WORKS_END 56/* VxWorks END Station/Access Point driver */ +/* 57 */ /* NucleusOS@ARM Driver. */ +#define COMP_ID_WSU 63/* WaveLAN Station Firmware Update utility +* variant 1: Windows +* variant 2: DOS +*/ +#define COMP_ID_AP1 81/* WaveLAN/IEEE AP */ +#define COMP_ID_EC 83/* WaveLAN/IEEE Ethernet Converter */ +#define COMP_ID_UBL 87/* USB Boot Loader */ + +#define COMP_ROLE_SUPL 0x00/* supplier */ +#define COMP_ROLE_ACT 0x01/* actor */ + +/* Supplier - actor */ +#define COMP_ID_MFI 0x01/* Modem - Firmware I/F */ +#define COMP_ID_CFI 0x02/* Controller - Firmware I/F */ +#define COMP_ID_PRI 0x03/* Primary Firmware - Driver I/F */ +#define COMP_ID_STA 0x04/* Station Firmware - Driver I/F */ +#define COMP_ID_DUI 0x05/* Driver - Utility I/F */ +#define COMP_ID_HSI 0x06/* H/W - Driver I/F */ +#define COMP_ID_DAI 0x07/* API - Driver I/F */ +#define COMP_ID_APF 0x08/* H/W - Driver I/F */ +#define COMP_ID_INT 0x09/* Intermediate FW - Driver I/F */ #ifdef HCF_LEGACY -#define HCF_ACT_ACS_SCAN HCF_ACT_PRS_SCAN -#define UIL_ACT_ACS_SCAN UIL_ACT_PRS_SCAN -#define MDD_ACT_ACS_SCAN MDD_ACT_PRS_SCAN -#define CFG_ACS_SCAN CFG_PRS_SCAN -#endif // HCF_LEGACY +#define HCF_ACT_ACS_SCAN HCF_ACT_PRS_SCAN +#define UIL_ACT_ACS_SCAN UIL_ACT_PRS_SCAN +#define MDD_ACT_ACS_SCAN MDD_ACT_PRS_SCAN +#define CFG_ACS_SCAN CFG_PRS_SCAN +#endif /* HCF_LEGACY */ -#endif // MDD_H +#endif /* MDD_H */
Signature · 1 line
1.7.10.4
Greg KH
maintainerQuoted 9 lines · Johan Meiring
This commit sorts out a ton of styling issues, including the use of C99 // comments, spaces before and after tabs, etc. I also took the time to align stuff a little more neatly using tabs. The file is nowhere near ready, but it's a start.
Signed-off-by Johan Meiring <[email protected]>--- drivers/staging/wlags49_h2/mdd.h | 1593 +++++++++++++++++++------------------- 1 file changed, 797 insertions(+), 796 deletions(-)
A patch this big is almost impossible to review, sorry. Please break it up into smaller pieces.
thanks,
greg k-h
Will do. Just a quick question: Is it acceptable to submit small patches even if the main file still fails the checkpatch,pl script? i.e. is it OK to fix e.g. the first 20 instances of C99 // comment usage, even if 200 remain afterwards, and then fix them later?
Johan
Quoted 17 lines · Greg KH
Quoted 9 lines · Johan Meiring
This commit sorts out a ton of styling issues, including the use of C99 // comments, spaces before and after tabs, etc. I also took the time to align stuff a little more neatly using tabs. The file is nowhere near ready, but it's a start.
Signed-off-by Johan Meiring <[email protected]>--- drivers/staging/wlags49_h2/mdd.h | 1593 +++++++++++++++++++------------------- 1 file changed, 797 insertions(+), 796 deletions(-)A patch this big is almost impossible to review, sorry. Please break it up into smaller pieces.
thanks,
greg k-h
Greg KH
maintainerQuoted 4 lines · Johan Meiring
Will do. Just a quick question: Is it acceptable to submit small patches even if the main file still fails the checkpatch,pl script? i.e. is it OK to fix e.g. the first 20 instances of C99 // comment usage, even if 200 remain afterwards, and then fix them later?
Yes, that is fine.
thanks,
greg k-h