Skip to contentSkip to conversation

ASoC: zoom2: Remove HS mux GPIO handling to avoid kernel crash due to BUG_ON()

PATCH Applied Peter Ujfalusi 2 participants 2 messages Dec 3, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: zoom2: Remove HS mux GPIO handling to avoid kernel crash due to BUG_ON()

The machine driver try to use GPIO15 of twl4030 for HS MUX which supposed to select between TWL's HSOL/R and tlv320aic3254's HPL/R.
The TWL's GPIO allocated dynamically so the (OMAP_MAX_GPIO_LINES + 15) is no longer valid GPIO number causing a kernel crash due to BUG_ON() Also the current machine driver supports only TWL audio currently: there is no need to control the GPIO.

---
Hi Liam, Mark,

I just got one zoom2 board and this patch is needed to get the board booting when audio is enabled.
For 3.9 I will convert the machine driver to platform device/driver, but to get 3.8 kernel booting this patch is needed.

Regards,
Peter

 sound/soc/omap/zoom2.c | 7 -------
 1 file changed, 7 deletions(-)
sound/soc/omap/zoom2.c +0 -7
index 1ff6bb9..771bff2 100644
@@ -37,8 +37,6 @@
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
 
-#define ZOOM2_HEADSET_MUX_GPIO		(OMAP_MAX_GPIO_LINES + 15)
-
 static int zoom2_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
@@ -187,9 +185,6 @@ static int __init zoom2_soc_init(void)
 	if (ret)
 		goto err1;
 
-	BUG_ON(gpio_request(ZOOM2_HEADSET_MUX_GPIO, "hs_mux") < 0);
-	gpio_direction_output(ZOOM2_HEADSET_MUX_GPIO, 0);
-
 	return 0;
 
 err1:
@@ -202,8 +197,6 @@ module_init(zoom2_soc_init);
 
 static void __exit zoom2_soc_exit(void)
 {
-	gpio_free(ZOOM2_HEADSET_MUX_GPIO);
-
 	platform_device_unregister(zoom2_snd_device);
 }
 module_exit(zoom2_soc_exit);
Signature · 1 line
1.8.0
Applied
#1 lore raw
Quoted 2 lines · Peter Ujfalusi

The machine driver try to use GPIO15 of twl4030 for HS MUX which supposed to select between TWL's HSOL/R and tlv320aic3254's HPL/R.

Applied, thanks.