OMAP3: fix panel timing on the mt_ventoux board
PATCH 1/2 OMAP3: fix panel timing on the mt_ventoux board
Signed-off-by Stefano Babic <[email protected]>
--- board/teejet/mt_ventoux/mt_ventoux.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
board/teejet/mt_ventoux/mt_ventoux.c +4 -4
@@ -73,10 +73,10 @@ static struct {static struct panel_config lcd_cfg[] = { { - .timing_h =PANEL_TIMING_H (4 ,8 ,41 ), - .timing_v =PANEL_TIMING_V (2 ,4 ,10 ), - .pol_freq =0x00000000 ,/* Pol Freq */ - .divisor =0x0001000d ,/* 33Mhz Pixel Clock */ + .timing_h =PANEL_TIMING_H (40 ,5 ,2 ), + .timing_v =PANEL_TIMING_V (8 ,8 ,2 ), + .pol_freq =0x00003000 ,/* Pol Freq */ + .divisor =0x00010033 ,/* 9 Mhz Pixel Clock */ .panel_type =0x01 ,/* TFT */ .data_lines =0x03 ,/* 24 Bit RGB */ .load_mode =0x02 ,/* Frame Mode */
Signature · 1 line
1.7.9.5
PATCH 2/2 OMAP3: TAM3517: add macros for reading eeprom
Added macros to read SOM information from the I2C
EEPROM.
Signed-off-by Stefano Babic <[email protected]>
--- board/technexion/twister/twister.c | 10 ++++-- board/teejet/mt_ventoux/mt_ventoux.c | 15 ++++++--- include/configs/tam3517-common.h | 58 +++++++++++++++++++++++++--------- 3 files changed, 60 insertions(+), 23 deletions(-)
board/technexion/twister/twister.c +7 -3
@@ -98,9 +98,12 @@ int board_init(void)return 0 ; } +#ifndef CONFIG_SPL_BUILD int misc_init_r (void ) {char *eth_addr; +struct tam3517_module_info info; +int ret;dieid_num_r ();
@@ -108,12 +111,13 @@ int misc_init_r(void)if (eth_addr)return 0 ; -#ifndef CONFIG_SPL_BUILD -TAM3517_READ_MAC_FROM_EEPROM ; -#endif +TAM3517_READ_EEPROM (&info, ret); +if (!ret) +TAM3517_READ_MAC_FROM_EEPROM (&info); return 0; } +#endif /* * Routine: set_muxconf_regs
board/teejet/mt_ventoux/mt_ventoux.c +10 -5
@@ -258,21 +258,26 @@ int board_init(void)return 0 ; } +#ifndef CONFIG_SPL_BUILD int misc_init_r (void ) {char *eth_addr; +struct tam3517_module_info info; +int ret; +TAM3517_READ_EEPROM (&info, ret);dieid_num_r (); - eth_addr =getenv ("ethaddr" ); -if (eth_addr) +if (ret)return 0 ; + eth_addr =getenv ("ethaddr" ); +if (!eth_addr) +TAM3517_READ_MAC_FROM_EEPROM (&info); -#ifndef CONFIG_SPL_BUILD -TAM3517_READ_MAC_FROM_EEPROM ; -#endif +TAM3517_PRINT_SOM_INFO (&info);return 0 ; } +#endif /* * Routine: set_muxconf_regs
include/configs/tam3517-common.h +43 -15
80 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH 2/2 OMAP3: TAM3517: add macros for reading eeprom
Quoted 4 lines · Stefano Babic
Added macros to read SOM information from the I2C
EEPROM.Signed-off-by Stefano Babic <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121210/7179e33a/attachment.pgp>
PATCH 1/2 OMAP3: fix panel timing on the mt_ventoux board
In reply to Stefano BabicQuoted 1 line · Stefano Babic
Signed-off-by Stefano Babic <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121210/0c6500db/attachment.pgp>