Driver for USB device with ID 050d:615a
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip. Instead I got a version with a Broadcom chip, which lsusb identifies as
Bus 001 Device 005: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
I have since acquired a different device with the Realtek chip, thus I could return the Belkin device; however, the cost was minimal and I will keep it if there is a driver for it. Is it a brcmfmac device that is not yet in the device tables, or is it some other sort of unit that may never be supported under Linux?
Thanks,
Larry
Quoted 6 lines · Larry Finger
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip. Instead I got a version with a Broadcom chip, which lsusb identifies as
Quoted 8 lines
Bus 001 Device 005: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
I have since acquired a different device with the Realtek chip, thus I could return the Belkin device; however, the cost was minimal and I will keep it if there is a driver for it. Is it a brcmfmac device that is not yet in the device tables, or is it some other sort of unit that may never be supported under Linux?
Hi Larry,
I went digging and this chip requires a different driver model (basically a split stack between host and dongle). This model is being abandoned for newer chips so we decided not to support it in mainline linux.
Gr. AvS
Quoted 16 lines · Arend van Spriel
Quoted 6 lines · Larry Finger
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip. Instead I got a version with a Broadcom chip, which lsusb identifies as
Quoted 8 lines
Bus 001 Device 005: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
I have since acquired a different device with the Realtek chip, thus I could return the Belkin device; however, the cost was minimal and I will keep it if there is a driver for it. Is it a brcmfmac device that is not yet in the device tables, or is it some other sort of unit that may never be supported under Linux?
Quoted 5 lines
Hi Larry,
I went digging and this chip requires a different driver model (basically a split stack between host and dongle). This model is being abandoned for newer chips so we decided not to support it in mainline linux.
Thanks for the info. I will try to return the device.
Larry
2012/10/24 Arend van Spriel <[email protected]>:
Quoted 18 lines · Larry Finger
Quoted 7 lines
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip. Instead I got a version with a Broadcom chip, which lsusb identifies as
Quoted 8 lines
Bus 001 Device 005: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
I have since acquired a different device with the Realtek chip, thus I could return the Belkin device; however, the cost was minimal and I will keep it if there is a driver for it. Is it a brcmfmac device that is not yet in the device tables, or is it some other sort of unit that may never be supported under Linux?
Quoted 5 lines
Hi Larry,
I went digging and this chip requires a different driver model (basically a split stack between host and dongle). This model is being abandoned for newer chips so we decided not to support it in mainline linux.
What do you think about listing not supported chipsets on your brcm80211 wiki page? Thay way users will get clear overview of this situation. I think I already heard similar answer about BCM43236 V2 (found by Hauke in his router).
Btw. your http://wireless.kernel.org/en/users/Drivers/brcm80211
doesn't say anything about BCM43143, which (I believe) is supported by brcmfmac.
Oh and one more thing: I believe putting minimal kernel version requires is also a good idea. Something like:
"BCM43143 - supported since 3.123"
Signature · 1 line
Rafał
Quoted 21 lines · Rafał Miłecki
2012/10/24 Arend van Spriel <[email protected]>:
Quoted 20 lines · Larry Finger
Quoted 7 lines
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip. Instead I got a version with a Broadcom chip, which lsusb identifies as
Quoted 8 lines
Bus 001 Device 005: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
I have since acquired a different device with the Realtek chip, thus It could return the Belkin device; however, the cost was minimal and I will keep it if there is a driver for it. Is it a brcmfmac device that is not yet in the device tables, or is it some other sort of unit that may never be supported under Linux?
Hi Larry,
Quoted 8 lines
Quoted 3 lines
I went digging and this chip requires a different driver model (basically a split stack between host and dongle). This model is being abandoned for newer chips so we decided not to support it in mainline linux.
What do you think about listing not supported chipsets on your brcm80211 wiki page? Thay way users will get clear overview of this situation. I think I already heard similar answer about BCM43236 V2 (found by Hauke in his router).
It has been suggested before (by you if I recall correctly). Howeverm the number of chip programs is extensive and it is hard to find out which went into production and are available to end-users. So we decided only list what we know.
Quoted 7 lines
Btw. your http://wireless.kernel.org/en/users/Drivers/brcm80211
doesn't say anything about BCM43143, which (I believe) is supported by brcmfmac.
Oh and one more thing: I believe putting minimal kernel version requires is also a good idea. Something like:
"BCM43143 - supported since 3.123"
The bcm43143 (and bcm43242) support is in the driver, but the firmware for these chips have not been released yet. With that I mean not released at all so we can not submit any firmware for those chips to the linux-firmware git repository. Consequently, it does not make sense to list them on wireless.kernel.org.
Thanks for the kernel version suggestion. I will add that info although there is always compat-wireless...eh...compat-drivers ;-)
Gr. AvS
Realtek RTL8192DU
In reply to Larry FingerHi
Quoted 4 lines · Larry Finger
Arend and Franky,
I recently purchased a Belkin N600 DB USB dongle on Ebay. I wanted to get the model with a Realtek RTL8192DU chip.
[…]
Quoted 2 lines
I have since acquired a different device with the Realtek chip, thus I could return the Belkin device;
[…]
As I just got hold of a Realtek RTL8192DU device (DeLock 88540[1]), I'm curious if you had a go with a driver for this chipset. The vendor driver seems to have issues with 64 bit operation (and kernel 3.7).
usb 3-1.1: new high-speed USB device number 6 using ehci_hcd usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8194 usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.1: Product: 802.11n NIC
usb 3-1.1: Manufacturer: Realtek
usb 3-1.1: SerialNumber: 00e04c000001
Regards
Stefan Lippers-Hollmann
[1] http://www.delock.com/produkte/G_88540/merkmale.html?setLanguage=en
Re: Realtek RTL8192DU
Quoted 11 lines · Stefan Lippers-Hollmann
As I just got hold of a Realtek RTL8192DU device (DeLock 88540[1]), I'm curious if you had a go with a driver for this chipset. The vendor driver seems to have issues with 64 bit operation (and kernel 3.7).
usb 3-1.1: new high-speed USB device number 6 using
ehci_hcdusb 3-1.1: New USB device found, idVendor=0bda, idProduct=8194 usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1.1: Product: 802.11n NIC
usb 3-1.1: Manufacturer: Realtek
usb 3-1.1: SerialNumber:00e04c000001
Stefan,
I have made some progress with the driver merged into staging. In addition, I have fixed the problems with 64-bit operation and the lack of kernel_thread() in 3.7 for driver rtl8192DU_linux_v4.0.0_5260.20120921. As I'm not sure the list wants to get the patch, I'll send it separately via private email.
Your tests will be useful as my device has USB ID 0bda:8193.
Larry