Skip to contentSkip to conversation

usb/host/ehci: Add support for EHCI on spear

PATCH New Vipin Kumar 2 participants 2 messages Dec 17, 2012

Subsystems (2)
USB USB ehci driver
lore
Share & tools
lore

Vipin Kumar

author
#0 lore raw

PATCH 1/1 usb/host/ehci: Add support for EHCI on spear

Add EHCI support for spear boards

Signed-off-by Armando Visconti <[email protected]>
Signed-off-by Vipin Kumar <[email protected]>
---
 drivers/usb/host/Makefile     |  1 +
 drivers/usb/host/ehci-spear.c | 59 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 drivers/usb/host/ehci-spear.c
drivers/usb/host/Makefile +1 -0
index 6c94794..9a6f982 100644
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
drivers/usb/host/ehci-spear.c new file +59 -0

59 lines not on this page · raw message

Signature · 1 line
1.8.0