Skip to contentSkip to conversation

ARM: arm-soc fixes for 3.8

GIT PULL New Olof Johansson 5 participants 13 messages Dec 20, 2012 – Dec 21, 2012

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

Hi Linus,

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

There's a chance that a couple of the OMAP patches will also go in through Russell, since my connectivity has been crap so far this trip and it causes build breaks for the platform. It's a branch pull from Tony, it should be a no-op either way.

-Olof

The following changes since commit f01af9f85855e38fbd601e033a8eac204cc4cc1c:

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc (2012-12-19 20:31:02 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/fixes

for you to fetch changes up to ae66ba6f15c4f20b5b613d9c494c56f67ddb70a8:

Merge branch 'v3.8-samsung-fixes-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes (2012-12-20 08:07:52 -0800)

----------------------------------------------------------------

ARM: arm-soc fixes for 3.8

This is a batch of fixes for arm-soc platforms. Most of it is for OMAP but there are others too (Samsung, i.MX, Tegra, ep93xx). Fixes warnings, some broken platforms and drivers, etc.

So, a bit all over the map really.

----------------------------------------------------------------
Axel Lin (1):
pinctrl: exynos5440/samsung: Staticize pcfgs

Dongjin Kim (1):
ARM: EXYNOS: Fix MSHC clocks instance names

Fabio Estevam (2):
ARM: dts: mx27: Fix the AIPI bus for FEC
ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices

Florian Fainelli (1):
ARM: ep93xx: properly wait for UART FIFO to be empty

Hiroshi Doyu (1):
amba: tegra-ahb: Fix warning w/o PM_SLEEP

Javier Martinez Canillas (1):
ARM: OMAP2+: common: remove use of vram

Jon Hunter (11):
ARM: OMAP2+: Fix realtime_counter_init warning in timer.c
ARM: AM335x: Fix warning in timer.c
ARM: OMAP2420: Fix ethernet support for OMAP2420 H4
ARM: OMAP: Remove debug-devices.c
ARM: dts: OMAP2420: Correct H4 board memory size
ARM: dts: Add build target for omap4-panda-a4
ARM: OMAP4: Update timer clock aliases
ARM: OMAP4: Add function table for non-M4X dplls
ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
ARM: OMAP4: Fix EMU clock domain always on

Kukjin Kim (3):
ARM: EXYNOS: fix build error when MFC is not selected
ARM: EXYNOS: fix GIC using for EXYNOS5440
ARM: EXYNOS: fix skip scu_enable() for EXYNOS5440

Linus Walleij (2):
ARM: u300: delete custom pin hog code
ARM: ux500: fix missing include

Maxime Ripard (1):
ARM: sunxi: Change device tree naming scheme for sunxi

Michael Spang (1):
ARM: SAMSUNG: Add missing include guard to gpio-core.h

Oleg Matcovschi (1):
OMAP2+: mux: Fixed gpio mux mode analysis

Olof Johansson (10):
ARM: exynos: Fix warning due to missing 'inline' in stub
ARM: davinci: fix build break due to missing include
Merge tag 'tegra-for-3.8-fixes-for-rc1' of git://git.kernel.org/.../swarren/linux-tegra into fixes Merge tag 'omap-fixes-a-for-v3.8-window' of git://git.kernel.org/.../pjw/omap-pending into fixes Merge tag 'omap-for-v3.8/fixes-for-merge-window-v4-signed' of git://git.kernel.org/.../tmlind/linux-omap into fixes Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes
Merge tag 'ep93xx-fixes-for-3.8' of git://github.com/RyanMallon/linux-ep93xx into fixes
Merge tag 'omap-for-v3.8/fixes-for-merge-window-part2-signed' of git://git.kernel.org/.../tmlind/linux-omap into fixes Merge branch 'v3.8-samsung-fixes-1' of git://git.kernel.org/.../kgene/linux-samsung into fixes Merge branch 'v3.8-samsung-fixes-audio' of git://git.kernel.org/.../kgene/linux-samsung into fixes

Padmavathi Venna (5):
ARM: S3C64XX: Add I2S clkdev support
ARM: S5PC100: Add I2S clkdev support
ARM: S5P64X0: Add I2S clkdev support
ARM: S5PV210: Avoid passing the clks through platform data
ARM: EXYNOS: Avoid passing the clks through platform data

Paul Walmsley (3):
ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings

Peter Ujfalusi (1):
ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c

Roger Quadros (1):
mfd: omap-usb-host: get rid of cpu_is_omap..() macros

Sachin Kamat (4):
pinctrl: samsung: Fix a typo in pinctrl-samsung.h
ARM: EXYNOS: Fix NULL pointer dereference bug in Origen
ARM: EXYNOS: Fix NULL pointer dereference bug in SMDK4X12
ARM: EXYNOS: Fix NULL pointer dereference bug in SMDKV310

Sascha Hauer (1):
ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks

Sivaram Nair (2):
ARM: tegra: select correct parent clk for pll_p
ARM: tegra: fix comment in dsib clk set_parent

Tomi Valkeinen (1):
OMAP: board-files: fix i2c_bus for tfp410

Tony Lindgren (3):
Merge branch 'fixes-timer-build' of git://github.com/jonhunter/linux into omap-for-v3.8/fixes-for-merge-window
ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
Merge branch 'omap-for-v3.8/fixes-for-merge-window' into omap-for-v3.8/fixes-for-merge-window-v2

Vaibhav Bedia (1):
ARM: OMAP: Fix build breakage due to missing include in i2c.c

Vaibhav Hiremath (1):
ARM: OMAP2+: Fix sparse warnings in timer.c

 arch/arm/boot/dts/Makefile                         |   5 +-
 arch/arm/boot/dts/imx27-3ds.dts                    |   8 +-
 arch/arm/boot/dts/imx27-phytec-phycore.dts         |  13 ++-
 arch/arm/boot/dts/imx27.dtsi                       |  11 +-
 arch/arm/boot/dts/omap2420-h4.dts                  |   2 +-
 ...n4i-cubieboard.dts => sun4i-a10-cubieboard.dts} |   4 +-
 arch/arm/boot/dts/{sun4i.dtsi => sun4i-a10.dtsi}   |   0
 ...sun5i-olinuxino.dts => sun5i-a13-olinuxino.dts} |   4 +-
 arch/arm/boot/dts/{sun5i.dtsi => sun5i-a13.dtsi}   |   0
 arch/arm/mach-davinci/board-da850-evm.c            |   1 +
 arch/arm/mach-ep93xx/include/mach/uncompress.h     |  10 +-
 arch/arm/mach-exynos/clock-exynos4.c               |   4 +-
 arch/arm/mach-exynos/common.c                      |   3 +-
 arch/arm/mach-exynos/common.h                      |   2 +-
 arch/arm/mach-exynos/dev-audio.c                   |  12 --
 arch/arm/mach-exynos/mach-exynos5-dt.c             |   2 +
 arch/arm/mach-exynos/mach-origen.c                 |   4 +-
 arch/arm/mach-exynos/mach-smdk4x12.c               |   4 +-
 arch/arm/mach-exynos/mach-smdkv310.c               |   4 +-
 arch/arm/mach-exynos/platsmp.c                     |   2 +-
 arch/arm/mach-imx/clk-imx51-imx53.c                |  16 +++
 .../devices/platform-mx2-emma.c                    |   4 +-
 arch/arm/mach-omap2/Kconfig                        |   3 +-
 arch/arm/mach-omap2/board-3430sdp.c                |   1 +
 arch/arm/mach-omap2/board-am3517evm.c              |   1 +
 arch/arm/mach-omap2/board-cm-t35.c                 |   1 +
 arch/arm/mach-omap2/board-devkit8000.c             |   1 +
 arch/arm/mach-omap2/board-h4.c                     |  83 ++++----------
 arch/arm/mach-omap2/board-omap3evm.c               |   1 +
 arch/arm/mach-omap2/board-omap3stalker.c           |   1 +
 arch/arm/mach-omap2/cclock44xx_data.c              |  78 ++++++++++---
 arch/arm/mach-omap2/clock.h                        |  10 ++
 arch/arm/mach-omap2/clockdomain.c                  |   3 +-
 arch/arm/mach-omap2/common.c                       |   3 -
 arch/arm/mach-omap2/cpuidle34xx.c                  |  14 ++-
 arch/arm/mach-omap2/cpuidle44xx.c                  |  28 +++--
 arch/arm/mach-omap2/dpll3xxx.c                     |  46 +++++---
 arch/arm/mach-omap2/dpll44xx.c                     |  64 +++++++++--
 arch/arm/mach-omap2/i2c.c                          |   1 +
 arch/arm/mach-omap2/mux.c                          |  10 +-
 arch/arm/mach-omap2/mux.h                          |  20 +++-
 arch/arm/mach-omap2/mux34xx.c                      |   2 +-
 arch/arm/mach-omap2/serial.c                       |   3 +-
 arch/arm/mach-omap2/timer.c                        |   8 +-
 arch/arm/mach-omap2/usb-host.c                     |   4 +
 arch/arm/mach-s3c64xx/clock.c                      | 126 +++++++++++++--------
 arch/arm/mach-s3c64xx/dev-audio.c                  |  11 --
 arch/arm/mach-s5p64x0/clock-s5p6440.c              |  49 +++++---
 arch/arm/mach-s5p64x0/clock-s5p6450.c              |  61 ++++++----
 arch/arm/mach-s5p64x0/dev-audio.c                  |  12 --
 arch/arm/mach-s5pc100/clock.c                      |  48 +++++---
 arch/arm/mach-s5pc100/dev-audio.c                  |  16 ---
 arch/arm/mach-s5pv210/dev-audio.c                  |  16 ---
 arch/arm/mach-tegra/common.c                       |   2 +-
 arch/arm/mach-tegra/tegra30_clocks.c               |   4 +-
 arch/arm/mach-u300/core.c                          |  34 ------
 arch/arm/mach-ux500/devices-db8500.h               |   1 +
 arch/arm/plat-omap/Makefile                        |   1 -
 arch/arm/plat-omap/debug-devices.c                 |  92 ---------------
 arch/arm/plat-omap/include/plat/debug-devices.h    |   2 -
 arch/arm/plat-samsung/include/plat/gpio-core.h     |   5 +
 drivers/amba/tegra-ahb.c                           |   2 +
 drivers/mfd/omap-usb-host.c                        |   3 +-
 drivers/pinctrl/pinctrl-exynos5440.c               |   2 +-
 drivers/pinctrl/pinctrl-samsung.c                  |   2 +-
 drivers/pinctrl/pinctrl-samsung.h                  |   2 +-
 drivers/tty/serial/omap-serial.c                   |   3 +-
 .../linux/platform_data/serial-omap.h              |   0
 include/linux/platform_data/usb-omap.h             |   3 +
 include/video/omap-panel-tfp410.h                  |   2 +-
 70 files changed, 513 insertions(+), 487 deletions(-)
 rename arch/arm/boot/dts/{sun4i-cubieboard.dts => sun4i-a10-cubieboard.dts} (87%)
 rename arch/arm/boot/dts/{sun4i.dtsi => sun4i-a10.dtsi} (100%)
 rename arch/arm/boot/dts/{sun5i-olinuxino.dts => sun5i-a13-olinuxino.dts} (86%)
 rename arch/arm/boot/dts/{sun5i.dtsi => sun5i-a13.dtsi} (100%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mx2-emma.c (94%)
 delete mode 100644 arch/arm/plat-omap/debug-devices.c
 delete mode 100644 arch/arm/plat-omap/include/plat/debug-devices.h
 rename arch/arm/plat-omap/include/plat/omap-serial.h => include/linux/platform_data/serial-omap.h (100%)
#1 lore raw
Quoted 6 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

Argh!

I pulled your earlier branch due to Tony's ack, and now you're re-created that branch with new pulls (effectively rebasing it).

Don't do things like this to me.

Linus

#2 lore raw

[proper reply-to-all this time]

Quoted 8 lines · Linus Torvalds
Quoted 6 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

Quoted 6 lines

Argh!

I pulled your earlier branch due to Tony's ack, and now you're re-created that branch with new pulls (effectively rebasing it).

Don't do things like this to me.

Yeah, sorry about that -- I wanted to replace the broken patch, and Tony's branch was based on a newer version of your tree so I brought everything forward as I had to rebase anyway.

I'll rebuild on top of what you've pulled, and send a fresh request of just the delta. Sorry about the race condition here.

-Olof

maintainer
#3 lore raw
Quoted 17 lines · Olof Johansson

[proper reply-to-all this time]

Quoted 13 lines · Linus Torvalds
Quoted 6 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

Argh!

I pulled your earlier branch due to Tony's ack, and now you're re-created that branch with new pulls (effectively rebasing it).

Quoted 8 lines
Quoted 1 line

Don't do things like this to me.

Yeah, sorry about that -- I wanted to replace the broken patch, and Tony's branch was based on a newer version of your tree so I brought everything forward as I had to rebase anyway.

I'll rebuild on top of what you've pulled, and send a fresh request of just the delta. Sorry about the race condition here.

Sorry for me adding to the confusion too.

Looks like Linus already applied "ARM: OMAP: Fix build breakage due to missing include in i2c.c" that I had queued earlier.

Olof, I suggest you just merge my pull request up to the other commit c16acf12 (ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c). Or just pick it whichever works better for you.

Regards,

Tony

#4 lore raw
Quoted 3 lines · Tony Lindgren

Looks like Linus already applied "ARM: OMAP: Fix build breakage due to missing include in i2c.c" that I had queued earlier.

Yeah, since it was my mis-merge, and I realized that I had entirely missed the header file fixup, I felt like I had to correct it since I had the report and the pointer to the fix..

Linus

#5 lore raw
In reply to Olof Johansson
Quoted 10 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

There's a chance that a couple of the OMAP patches will also go in through Russell, since my connectivity has been crap so far this trip and it causes build breaks for the platform. It's a branch pull from Tony, it should be a no-op either way.

Olof,

Not sure what's going on, but my recent pull from arm-soc for-next still hasn't solved the OMAP build failures in my kbuild - I'm still getting:

arch/arm/mach-omap2/timer.c: In function 'omap_get_timer_dt':
arch/arm/mach-omap2/timer.c:178:3: error: implicit declaration of function 'prom_add_property' arch/arm/mach-omap2/i2c.c: In function 'omap_pm_set_max_mpu_wakeup_lat_compat':
arch/arm/mach-omap2/i2c.c:130:2: error: implicit declaration of function 'omap_pm_set_max_mpu_wakeup_lat'

This is the top commit I have from you:

commit aad05c3602ba5c42ff8d0e572b2f614f25779ede
Merge: eccf4b3 f64d204
Author: Olof Johansson <[email protected]>
Date: Mon Dec 17 18:44:26 2012 -0800

Merge branch 'late/omap-cleanup' into for-next

By Tony Lindgren (3) and others
via Tony Lindgren
* late/omap-cleanup:
arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON
OMAP2: Fix a typo - replace regist with register.
ARM/omap: use module_platform_driver macro
ARM: OMAP2+: PMU: Remove unused header
ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c
ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support
ARM: OMAP2+: enable devtmpfs and devtmpfs automount
ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
ARM: OMAP2+: Drop plat/cpu.h for omap2plus
ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage
MAINTAINERS: Add an entry for omap related .dts files

#6 lore raw
Quoted 14 lines · Russell King - ARM Linux
Quoted 10 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

There's a chance that a couple of the OMAP patches will also go in through Russell, since my connectivity has been crap so far this trip and it causes build breaks for the platform. It's a branch pull from Tony, it should be a no-op either way.

Olof,

Quoted 7 lines

Not sure what's going on, but my recent pull from arm-soc for-next still hasn't solved the OMAP build failures in my kbuild - I'm still getting:

arch/arm/mach-omap2/timer.c: In function 'omap_get_timer_dt':
arch/arm/mach-omap2/timer.c:178:3: error: implicit declaration of function 'prom_add_property' arch/arm/mach-omap2/i2c.c: In function 'omap_pm_set_max_mpu_wakeup_lat_compat':
arch/arm/mach-omap2/i2c.c:130:2: error: implicit declaration of function 'omap_pm_set_max_mpu_wakeup_lat'

Yep, I forgot to bring the fixes branch into our for-next. Try again once it mirrors out, I just pushed out a rebuild of it. New top commit should be e691d77e8825054376b31e79a9b5f9fa79fe764d.

I'm doing a "build all defconfigs" run before sending the incremental pull request of fixes to Linus.

-Olof

maintainer
#7 lore raw
Quoted 7 lines · Olof Johansson

Yep, I forgot to bring the fixes branch into our for-next. Try again once it mirrors out, I just pushed out a rebuild of it. New top commit should be e691d77e8825054376b31e79a9b5f9fa79fe764d.

I'm doing a "build all defconfigs" run before sending the incremental pull request of fixes to Linus.

Commit e691d77e8825054376b31e79a9b5f9fa79fe764d builds and boots with my testconfigs.

I'm seeing the "BUG: spinlock bad magic on CPU#0" issue reported and fixed here:

http://marc.info/?l=linux-arm-kernel&m=135594868503683&w=2

But that's probably been already posted as a proper patch somewhere?

Regards,

Tony

#8 lore raw
Quoted 8 lines · Tony Lindgren

I'm seeing the "BUG: spinlock bad magic on CPU#0" issue reported and fixed here:

http://marc.info/?l=linux-arm-kernel&m=135594868503683&w=2

But that's probably been already posted as a proper patch somewhere?

Hmm. The patch there looks better than any alternative I can think of. It uses the same spinlock name for the whole array, but I think it's only used for lockdep printouts, so that should be fine.

Send me the patch with signed-off and tested-by, and perhaps have a few more people test it. The powerpc and sparc people both use it in their 32-bit versions and have responsible maintainers, so it might be worth it double-checking with BenH and DaveM about it, just in case. Added to the Cc.

Linus

maintainer
#9 lore raw
Quoted 14 lines · Linus Torvalds
Quoted 8 lines · Tony Lindgren

I'm seeing the "BUG: spinlock bad magic on CPU#0" issue reported and fixed here:

http://marc.info/?l=linux-arm-kernel&m=135594868503683&w=2

But that's probably been already posted as a proper patch somewhere?

Hmm. The patch there looks better than any alternative I can think of. It uses the same spinlock name for the whole array, but I think it's only used for lockdep printouts, so that should be fine.

Quoted 5 lines

Send me the patch with signed-off and tested-by, and perhaps have a few more people test it. The powerpc and sparc people both use it in their 32-bit versions and have responsible maintainers, so it might be worth it double-checking with BenH and DaveM about it, just in case. Added to the Cc.

Looks like it's been posted to LKML as:

[PATCH] lib: atomic64: Initialize locks statically to fix early users

Replied to it with my tested-by if you want to pick it up.

Regards,

Tony

maintainer
#10 lore raw

PATCH 1/1 ARM: OMAP2+: Trivial fix for IOMMU merge issue (Re: [GIT PULL v2] ARM: arm-soc fixes for 3.8)

Commit 787314c3 (Merge tag 'iommu-updates-v3.8' of
git://git./linux/kernel/git/joro/iommu) did not account for the changed header location.

The headers were made local to mach-omap2 as they are specific to omap2+ only, and we wanted to get most of the #include <plat/*.h> headers fixed up anyways for the ARM multiplatform support.

We attempted to avoid this kind of merge conflict early on by setting up a minimal git branch shared by the arm-soc tree and the iommu tree, but looks like we still hit a merge issue there as the branches got merged as various topic branches.

---

Found one more merge issue with the recent IOMMU merge.

Linus, maybe apply this fix directly as Olof's branch is based on an earlier commit?

arch/arm/mach-omap2/omap-iommu.c +2 -2
@@ -16,8 +16,8 @@
 #include <linux/slab.h>
 
 #include <linux/platform_data/iommu-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
 
 static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
 {
#11 lore raw
In reply to Linus Torvalds
Quoted 9 lines · Linus Torvalds

Hmm. The patch there looks better than any alternative I can think of. It uses the same spinlock name for the whole array, but I think it's only used for lockdep printouts, so that should be fine.

Send me the patch with signed-off and tested-by, and perhaps have a few more people test it. The powerpc and sparc people both use it in their 32-bit versions and have responsible maintainers, so it might be worth it double-checking with BenH and DaveM about it, just in case. Added to the Cc.

The patch looks fine. I won't personally be able to test it until after I'm back from vacation though. I'll see if I can get somebody else to but don't wait for me.

Cheers,
Ben.

#12 lore raw
In reply to Olof Johansson
Quoted 19 lines · Olof Johansson
Quoted 17 lines · Russell King - ARM Linux
Quoted 10 lines · Olof Johansson

One of the sunxi patches from the last pull request was misapplied (I realized what happened -- git am -s didn't apply cleanly so I had done it through regular patch, thus not catching the renames properly). Here's a fresh version of the pull request with a couple more OMAP and Samsung patches included.

There's a chance that a couple of the OMAP patches will also go in through Russell, since my connectivity has been crap so far this trip and it causes build breaks for the platform. It's a branch pull from Tony, it should be a no-op either way.

Olof,

Not sure what's going on, but my recent pull from arm-soc for-next still hasn't solved the OMAP build failures in my kbuild - I'm still getting:

Quoted 8 lines
Quoted 4 lines

arch/arm/mach-omap2/timer.c: In function 'omap_get_timer_dt':
arch/arm/mach-omap2/timer.c:178:3: error: implicit declaration of function 'prom_add_property' arch/arm/mach-omap2/i2c.c: In function 'omap_pm_set_max_mpu_wakeup_lat_compat':
arch/arm/mach-omap2/i2c.c:130:2: error: implicit declaration of function 'omap_pm_set_max_mpu_wakeup_lat'

Yep, I forgot to bring the fixes branch into our for-next. Try again once it mirrors out, I just pushed out a rebuild of it. New top commit should be e691d77e8825054376b31e79a9b5f9fa79fe764d.

Yes, this looks much better, thanks.