toolchain-crosstool-ng: update PPL and CLoog versions in default configs

PATCH New Thomas Petazzoni 3 participants 5 messages Dec 19, 2012 – Dec 21, 2012

Share & tools

Thomas Petazzoni

author

2012-12-19 23:29 UTC #0 lore raw

PATCH 1/1 toolchain-crosstool-ng: update PPL and CLoog versions in default configs

We have updated our Crosstool-NG configuration to gcc 4.6.x, but the PPL and CLoog versions were not updated accordingly. With gcc 4.6.x, at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL 0.11.

Fixes:

http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log

Signed-off-by Thomas Petazzoni <[email protected]>

---
 .../crosstool-ng.config-eglibc                     |   16 ++++++++++------
 .../crosstool-ng.config-glibc                      |   16 ++++++++++------
 .../crosstool-ng.config-uClibc                     |   16 ++++++++++------
 3 files changed, 30 insertions(+), 18 deletions(-)

toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc +10 -6

index 11eb602..08f036c 100644
@@ -474,18 +474,22 @@ CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
 # CT_PPL_V_0_11_1 is not set
 # CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
 # CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
 # CT_CLOOG_V_0_15_8 is not set
 # CT_CLOOG_V_0_15_7 is not set
 # CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
 CT_MPC_V_0_9=y
 # CT_MPC_V_0_8_2 is not set
 # CT_MPC_V_0_8_1 is not set

toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc +10 -6

index c30a115..ae0bc02 100644
@@ -463,18 +463,22 @@ CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
 # CT_PPL_V_0_11_1 is not set
 # CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
 # CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
 # CT_CLOOG_V_0_15_8 is not set
 # CT_CLOOG_V_0_15_7 is not set
 # CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
 CT_MPC_V_0_9=y
 # CT_MPC_V_0_8_2 is not set
 # CT_MPC_V_0_8_1 is not set

toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc +10 -6

index e93128b..4f21263 100644
@@ -445,18 +445,22 @@ CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
-# CT_PPL_V_0_11_2 is not set
+CT_PPL_V_0_11_2=y
 # CT_PPL_V_0_11_1 is not set
 # CT_PPL_V_0_11 is not set
-CT_PPL_V_0_10_2=y
-CT_PPL_VERSION="0.10.2"
-# CT_CLOOG_V_0_15_11 is not set
+# CT_PPL_V_0_10_2 is not set
+CT_PPL_VERSION="0.11.2"
+CT_PPL_0_11=y
+CT_PPL_NEEDS_LIBPWL=y
+CT_CLOOG_V_0_15_11=y
 # CT_CLOOG_V_0_15_10 is not set
-CT_CLOOG_V_0_15_9=y
+# CT_CLOOG_V_0_15_9 is not set
 # CT_CLOOG_V_0_15_8 is not set
 # CT_CLOOG_V_0_15_7 is not set
 # CT_CLOOG_V_0_15_6 is not set
-CT_CLOOG_VERSION="0.15.9"
+CT_CLOOG_VERSION="0.15.11"
+CT_CLOOG_0_15_1x=y
+CT_CLOOG_NEEDS_AUTORECONF=y
 CT_MPC_V_0_9=y
 # CT_MPC_V_0_8_2 is not set
 # CT_MPC_V_0_8_1 is not set

Signature · 1 line

1.7.9.5

Yann E. MORIN

2012-12-20 19:56 UTC #1 lore raw

PATCH 1/1 toolchain-crosstool-ng: update PPL and CLoog versions in default configs

Thomas, All,

Quoted 10 lines · On Thursday 20 December 2012 Thomas Petazzoni wrote:

We have updated our Crosstool-NG configuration to gcc 4.6.x, but the PPL and CLoog versions were not updated accordingly. With gcc 4.6.x, at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL 0.11.
Fixes:
http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Signed-off-by Thomas Petazzoni <[email protected]>

The eglibc build is broken for a defconfig:
/tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without previous .cfi_startproc
But that's another issue.

Tested-by "Yann E. MORIN" <[email protected]>

Regards,
Yann E. MORIN.

Signature · 6 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

Yann E. MORIN

2012-12-20 20:11 UTC #2 lore raw

PATCH 1/1 toolchain-crosstool-ng: update PPL and CLoog versions in default configs

Thomas, All,

Quoted 8 lines · On Thursday 20 December 2012 Yann E. MORIN wrote:

Quoted 7 lines · On Thursday 20 December 2012 Thomas Petazzoni wrote:
We have updated our Crosstool-NG configuration to gcc 4.6.x, but the PPL and CLoog versions were not updated accordingly. With gcc 4.6.x, at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL 0.11.
Fixes:

Quoted 8 lines

Quoted 3 lines
http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Signed-off-by Thomas Petazzoni <[email protected]>
The eglibc build is broken for a defconfig:
/tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without previous .cfi_startproc
But that's another issue.

Well, my bad, it's the glibc build that is broken.

Regards,
Yann E. MORIN.

Signature · 6 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

Thomas Petazzoni

author

2012-12-20 22:07 UTC #3 lore raw

PATCH 1/1 toolchain-crosstool-ng: update PPL and CLoog versions in default configs

Dear Yann E. MORIN,

Quoted 6 lines · Yann E. MORIN

Quoted 4 lines
The eglibc build is broken for a defconfig:
/tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without previous .cfi_startproc
But that's another issue.
Well, my bad, it's the glibc build that is broken.

I admit I had tested an eglibc build and an uClibc build, but I thought it was ok to validate the PPL+CLoog thing, which is independent from the C library problem.

Thomas

Signature · 4 lines

Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Peter Korsgaard

2012-12-21 08:16 UTC #4 lore raw

PATCH 1/1 toolchain-crosstool-ng: update PPL and CLoog versions in default configs

In reply to Thomas Petazzoni

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> We have updated our Crosstool-NG configuration to gcc 4.6.x, but the Thomas> PPL and CLoog versions were not updated accordingly. With gcc 4.6.x, Thomas> at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL Thomas> 0.11.

Thomas> Fixes:

Thomas> http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log

Committed, thanks.

Signature · 1 line

Bye, Peter Korsgaard