mxs: Add NAND fdt and ramdisk partition to m28evk
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
--- include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/m28evk.h +2 -0
@@ -178,6 +178,8 @@"512k(environment)," \"512k(redundant-environment)," \"4m(kernel)," \ +"128k(fdt)," \ +"8m(ramdisk)," \ "-(filesystem)"#else #define CONFIG_ENV_IS_NOWHERE
Signature · 1 line
1.7.10.4
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 4 lines · Marek Vasut
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>
A partition for a ramdisk? maybe initramfs or initrd might be better?
--
Otavio Salvador O.S. Systems
E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Otavio Salvador,
Quoted 7 lines · Marek Vasut
Quoted 4 lines
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be better?
Separate ramdisk (initrd).
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 11 lines · Marek Vasut
Dear Otavio Salvador,
Quoted 7 lines · Marek Vasut
Quoted 4 lines
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be better?
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
--
Otavio Salvador O.S. Systems
E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 9 lines · Otavio Salvador
Quoted 3 lines · Marek Vasut
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a separate
partition
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
for the ramdisk and fdt blob on the NAND.
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be
better?
Quoted 2 lines
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
-Scott
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 12 lines · Scott Wood
Quoted 11 lines · Otavio Salvador
Quoted 9 lines · Marek Vasut
Dear Otavio Salvador,
Quoted 7 lines · Marek Vasut
Quoted 5 lines
Adjust the NAND partitioning layout so that there is a separate partition
for the ramdisk and fdt blob on the NAND.Signed-off-by Marek Vasut <[email protected]>
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
A partition for a ramdisk? maybe initramfs or initrd might be better?
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I have nothing against initramfs or any other name, I just think 'ramdisk' is confusing (but it might be just my impression) that's why I commented in the patch so others can comment on it too.
--
Otavio Salvador O.S. Systems
E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 21 lines · Otavio Salvador
Quoted 6 lines · Scott Wood
Quoted 5 lines · Otavio Salvador
Quoted 3 lines · Marek Vasut
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a
separate
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
partition
for the ramdisk and fdt blob on the NAND.Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be
better?
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
Separate ramdisk (initrd).
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I have nothing against initramfs or any other name, I just think 'ramdisk' is confusing (but it might be just my impression) that's why I commented in the patch so others can comment on it too.
How is an abbreviation for "initial ramdisk" less confusing than "ramdisk"?
-Scott
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
In reply to Scott WoodDear Scott Wood,
Quoted 17 lines · Otavio Salvador
Quoted 16 lines · Marek Vasut
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a separate
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be
Quoted 7 lines
Quoted 5 lines
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply want separate ramdisk outside of the kernel.
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 25 lines · Marek Vasut
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut <[email protected]>
Quoted 6 lines · wrote:
Quoted 6 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a
separate
Quoted 13 lines
Quoted 13 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be
better?
Quoted 1 line
Separate ramdisk (initrd).
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply want separate
ramdisk outside of the kernel.
initramfs and initrd are different ways of formatting a ramdisk. It's orthogonal to whether it's separate from the kernel image.
-Scott
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Scott Wood,
Quoted 30 lines · Marek Vasut
Quoted 29 lines
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut <[email protected]>
Quoted 6 lines · wrote:
Quoted 6 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a
separate
Quoted 14 lines
Quoted 13 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might be
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply want separate
ramdisk outside of the kernel.initramfs and initrd are different ways of formatting a ramdisk. It's orthogonal to whether it's separate from the kernel image.
True, so what is the discussion here about anyway? I fail to see the point -- is there a problem with the patch or not? If not, please apply for .01 release.
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 41 lines · Marek Vasut
Dear Scott Wood,
Quoted 10 lines · Marek Vasut
Quoted 9 lines
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut <[email protected]>
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a
separate
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might
be
Quoted 10 lines
Quoted 10 lines
Quoted 8 lines
Quoted 6 lines
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply
want
Quoted 3 lines
Quoted 2 lines
separate
ramdisk outside of the kernel.
Quoted 8 lines
Quoted 1 line
initramfs and initrd are different ways of formatting a ramdisk.
It's
Quoted 1 line
orthogonal to whether it's separate from the kernel image.
True, so what is the discussion here about anyway? I fail to see the point -- is
there a problem with the patch or not? If not, please apply for .01 release.
I have no problem with it. My point was that "ramdisk" is a better name than "initrd".
-Scott
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Scott Wood,
Quoted 52 lines · Marek Vasut
Quoted 51 lines
Dear Scott Wood,
Quoted 10 lines · Marek Vasut
Quoted 9 lines
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut <[email protected]>
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is a
separate
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd might
be
Quoted 9 lines
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply
want
Quoted 4 lines
Quoted 2 lines
separate
ramdisk outside of the kernel.initramfs and initrd are different ways of formatting a ramdisk.
It's
Quoted 1 line
orthogonal to whether it's separate from the kernel image.
Quoted 7 lines
Quoted 4 lines
True, so what is the discussion here about anyway? I fail to see the point -- is
there a problem with the patch or not? If not, please apply for .01 release.I have no problem with it. My point was that "ramdisk" is a better name than "initrd".
The patch contains "ramdisk" ... go look at the patch please.
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 61 lines · Marek Vasut
Dear Scott Wood,
Quoted 8 lines · Marek Vasut
Quoted 7 lines
Dear Scott Wood,
Quoted 5 lines · Marek Vasut
Quoted 4 lines
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut
Quoted 10 lines
Quoted 10 lines
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is
a
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
separate
Quoted 7 lines
Quoted 7 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd
might
Quoted 18 lines
Quoted 18 lines
be
Quoted 9 lines
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply
want
Quoted 3 lines
Quoted 2 lines
separate
ramdisk outside of the kernel.Quoted 7 lines
Quoted 7 lines
Quoted 1 line
initramfs and initrd are different ways of formatting a ramdisk.
It's
Quoted 1 line
orthogonal to whether it's separate from the kernel image.
True, so what is the discussion here about anyway? I fail to see
the
Quoted 2 lines
Quoted 2 lines
point -- is
there a problem with the patch or not? If not, please apply for
Quoted 7 lines
.01
Quoted 4 lines
Quoted 1 line
release.
I have no problem with it. My point was that "ramdisk" is a better name than "initrd".
The patch contains "ramdisk" ... go look at the patch please.
Sigh... I said I have no problem with the patch. I was responding to Otavio's suggestion to change it to initrd.
-Scott
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Scott Wood,
Quoted 72 lines · Marek Vasut
Quoted 71 lines
Dear Scott Wood,
Quoted 8 lines · Marek Vasut
Quoted 7 lines
Dear Scott Wood,
Quoted 5 lines · Marek Vasut
Quoted 4 lines
Dear Scott Wood,
Quoted 2 lines · Otavio Salvador
Quoted 1 line
On Wed, Dec 26, 2012 at 1:13 AM, Marek Vasut
Quoted 9 lines
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Dear Otavio Salvador,
Quoted 1 line
On Tue, Dec 25, 2012 at 11:08 PM, Marek Vasut
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Adjust the NAND partitioning layout so that there is
a
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
separate
Quoted 7 lines
Quoted 7 lines
partition
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>A partition for a ramdisk? maybe initramfs or initrd
might
Quoted 17 lines
Quoted 17 lines
be
Quoted 9 lines
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
better?
Quoted 1 line
Separate ramdisk (initrd).
So maybe name it 'initrd' in the partition table?
Why bias users against using initramfs instead?
I'm not biasing users against initramfs, but some users simply
want
Quoted 3 lines
Quoted 2 lines
separate
ramdisk outside of the kernel.Quoted 7 lines
Quoted 7 lines
Quoted 1 line
initramfs and initrd are different ways of formatting a ramdisk.
It's
Quoted 1 line
orthogonal to whether it's separate from the kernel image.
True, so what is the discussion here about anyway? I fail to see
the
Quoted 2 lines
Quoted 2 lines
point -- is
there a problem with the patch or not? If not, please apply for.01
Quoted 2 lines
Quoted 1 line
release.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I have no problem with it. My point was that "ramdisk" is a better name than "initrd".
The patch contains "ramdisk" ... go look at the patch please.
Sigh... I said I have no problem with the patch. I was responding to Otavio's suggestion to change it to initrd.
Sigh ... I got lost in this (pointless) discussion, sorry.
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
In reply to Marek VasutQuoted 17 lines · Marek Vasut
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>Cc Detlev Zundel <[email protected]>Cc Stefano Babic <[email protected]>Cc Wolfgang Denk <[email protected]>--- include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/m28evk.h +0
-0
include/configs/m28evk.h line 185
Quoted 8 lines
include/configs/m28evk.h +2
-0@@ -178,6 +178,8 @@"512k(environment)," \"512k(redundant-environment)," \"4m(kernel)," \ +"128k(fdt)," \ +"8m(ramdisk)," \ "-(filesystem)"#else #define CONFIG_ENV_IS_NOWHERE
Discussion in the thread was quite off-topic - but at the end, there is nothing for not applying it.
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Stefano Babic,
Quoted 28 lines · Marek Vasut
Quoted 27 lines
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>Cc Detlev Zundel <[email protected]>Cc Stefano Babic <[email protected]>Cc Wolfgang Denk <[email protected]>---
include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/m28evk.h +2
-0@@ -178,6 +178,8 @@"512k(environment)," \"512k(redundant-environment)," \"4m(kernel)," \ +"128k(fdt)," \ +"8m(ramdisk)," \"-(filesystem)"
Quoted 7 lines
Quoted 2 lines
#else
#defineCONFIG_ENV_IS_NOWHEREDiscussion in the thread was quite off-topic - but at the end, there is nothing for not applying it.
Applied to u-boot-imx, thanks.
Thanks, will this make it for 2013.01 please ?
Quoted 2 lines
Best regards,
Stefano Babic
Best regards,
Marek Vasut
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Quoted 36 lines · Marek Vasut
Dear Stefano Babic,
Quoted 34 lines · Marek Vasut
Quoted 27 lines
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>Cc Detlev Zundel <[email protected]>Cc Stefano Babic <[email protected]>Cc Wolfgang Denk <[email protected]>---
include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/m28evk.h +2
-0@@ -178,6 +178,8 @@"512k(environment)," \"512k(redundant-environment)," \"4m(kernel)," \ +"128k(fdt)," \ +"8m(ramdisk)," \"-(filesystem)"
Quoted 2 lines
#else
#defineCONFIG_ENV_IS_NOWHEREDiscussion in the thread was quite off-topic - but at the end, there is nothing for not applying it.
Quoted 3 lines
Quoted 1 line
Applied to u-boot-imx, thanks.
Thanks, will this make it for 2013.01 please ?
Of course, it is part of my next pull request.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 mxs: Add NAND fdt and ramdisk partition to m28evk
Dear Stefano Babic,
Quoted 37 lines · Marek Vasut
Quoted 36 lines
Dear Stefano Babic,
Quoted 34 lines · Marek Vasut
Quoted 27 lines
Adjust the NAND partitioning layout so that there is a separate partition for the ramdisk and fdt blob on the NAND.
Signed-off-by Marek Vasut <[email protected]>Cc Detlev Zundel <[email protected]>Cc Stefano Babic <[email protected]>Cc Wolfgang Denk <[email protected]>---
include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+)include/configs/m28evk.h +2
-0@@ -178,6 +178,8 @@"512k(environment)," \"512k(redundant-environment)," \"4m(kernel)," \ +"128k(fdt)," \ +"8m(ramdisk)," \"-(filesystem)"
Quoted 2 lines
#else
#defineCONFIG_ENV_IS_NOWHEREDiscussion in the thread was quite off-topic - but at the end, there is nothing for not applying it.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Applied to u-boot-imx, thanks.
Thanks, will this make it for 2013.01 please ?
Of course, it is part of my next pull request.
Thanks!
Best regards,
Marek Vasut