Skip to contentSkip to conversation

Improvements to memory, hashing functions for sandbox

PATCH Superseded Simon Glass 5 participants 62 messages Dec 26, 2012 – Feb 27, 2013

Subsystems (5)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover Improvements to memory, hashing functions for sandbox

This series aims to get all the memory functions running correctly on sandbox.

There was some discussion about this a while ago, and a commit was added to show a possible approach:

355a8357 sandbox: Change md command to use map_physmem

This commit was subsequently reverted because it used map_physmem() instead of the NOP that most architectures need for the memory functions.

This series introduces map_sysmem(), a NOP on all architectures except sandbox. It allows us to use a ram buffer to which all U-Boot addresses are relative. The memory commands (including hashing) are updated to use this so that sandbox can now use those commands.

Half of the mtest code is behind #ifdefs and there is duplication of some functions in both versions of the memory test. Several patches here clean this up a bit and get it working on sandbox.

The numeric setenv_ulong() function is a useful way of avoiding a 'char buf[17]; sprintf(buf, "%ld", ...); setenv("...", buf)' sequence. There is also setenv_addr(). What is missing is setenv_hex() which sets a ulong in hex format. Add this function and then make use of it in the main places: common/ drivers/ and net/.

The recently added and very basic hash instructure can help reduce code duplication in some cases. Redo the crc32 command to use this, and make it available through the 'hash' command. Also a few bugs were found in hashing with verify disabled - the arg count was not checked and a variable declaration was missing.

To permit the memory tester to run on sandbox, we need ctrl-C to work. To achieve this, add a proper implementation of sandbox's tstc(), with a simple FIFO for character input. An os_usleep() is added to ensure that U-Boot does not consume infinite CPU when setting at the command prompt.

With all of this it is possible to use the memory commands in sandbox, as well as crc32 and the other hashing commands.

Simon Glass (19):
Tidy up error checking and fix bug in hash command Update print_buffer() to use const
sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf
sandbox: Change memory commands to use map_physmem Split out the memory tests into separate functions Use common mtest iteration counting
Fix mtest indenting
Bring mtest putc() into common code
Reduce casting in mtest
Update set_working_fdt_addr() to use setenv_addr()
common: Use new numeric setenv functions
drivers: Use new numeric setenv functions
net: Use new numeric setenv functions
image: Use crc header file instead of C prototypes Roll crc32 into hash infrastructure
sandbox: config: Enable hash functions and mtest Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file
sandbox: Update mtest to fix crashes
sandbox: Allow hash functions to work correctly

Taylor Hutt (1):
sandbox: Improve sandbox serial port keyboard interface

 README                        |    9 +
 arch/sandbox/config.mk        |    1 +
 arch/sandbox/cpu/os.c         |    8 +
 arch/sandbox/include/asm/io.h |   10 +
 common/cmd_bootm.c            |   11 +-
 common/cmd_cbfs.c             |    4 +-
 common/cmd_cramfs.c           |    4 +-
 common/cmd_fdos.c             |    4 +-
 common/cmd_fdt.c              |   11 +-
 common/cmd_hash.c             |    4 +
 common/cmd_jffs2.c            |    4 +-
 common/cmd_load.c             |   12 +-
 common/cmd_mem.c              |  798 ++++++++++++++++++++---------------------
 common/cmd_mtdparts.c         |    4 +-
 common/cmd_nand.c             |   12 +-
 common/cmd_nvedit.c           |   11 +-
 common/cmd_reiser.c           |    4 +-
 common/cmd_setexpr.c          |   39 ++-
 common/cmd_unzip.c            |    4 +-
 common/cmd_ximg.c             |    7 +-
 common/cmd_zfs.c              |    3 +-
 common/cmd_zip.c              |    4 +-
 common/hash.c                 |   31 ++-
 common/image.c                |    4 +-
 drivers/net/fm/fm.c           |    4 +-
 drivers/serial/sandbox.c      |   44 ++-
 fs/fs.c                       |    4 +-
 fs/ubifs/ubifs.c              |    4 +-
 include/common.h              |   29 ++-
 include/configs/sandbox.h     |    9 +-
 include/hash.h                |    2 +-
 include/os.h                  |   10 +
 include/u-boot/crc.h          |   11 +
 lib/crc32.c                   |    9 +
 lib/display_options.c         |    3 +-
 net/net.c                     |    8 +-
 36 files changed, 612 insertions(+), 528 deletions(-)
Signature · 1 line
1.7.7.3
#1 lore raw

PATCH 1/20 Tidy up error checking and fix bug in hash command

There are two problems:

1. The argument count needs to be checked before argv is used
2. When verify is not enabled, we need to define a constant zero value

---
 common/cmd_hash.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
common/cmd_hash.c +4 -0
index 689c608..eb6a338 100644
@@ -32,11 +32,15 @@ static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_HASH_VERIFY
 	int verify = 0;
 
+	if (argc < 4)
+		return CMD_RET_USAGE;
 	if (!strcmp(argv[1], "-v")) {
 		verify = 1;
 		argc--;
 		argv++;
 	}
+#else
+	const int verify = 0;
 #endif
 	/* Move forward to 'algorithm' parameter */
 	argc--;
Signature · 1 line
1.7.7.3
author Applied
#2 lore raw

PATCH 1/20 Tidy up error checking and fix bug in hash command

Quoted 6 lines · Simon Glass

There are two problems:

1. The argument count needs to be checked before argv is used
2. When verify is not enabled, we need to define a constant zero value

Applied to x86/master.

#3 lore raw

PATCH 2/20 Update print_buffer() to use const

In reply to Simon Glass

The buffer cannot be changed by this function, so change the buffer pointer to a const. This allows callers with const pointer to use the function without a cast.

---
 include/common.h      |    3 ++-
 lib/display_options.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
include/common.h +2 -1
index d0bf1e8..f2035c0 100644
@@ -270,7 +270,8 @@ int	cpu_init(void);
 phys_size_t initdram (int);
 int	display_options (void);
 void	print_size(unsigned long long, const char *);
-int	print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
+int print_buffer(ulong addr, const void *data, uint width, uint count,
+		 uint linelen);
 
 /* common/main.c */
 void	main_loop	(void);
lib/display_options.c +2 -1
index 694d2f2..0339970 100644
@@ -98,7 +98,8 @@ void print_size(unsigned long long size, const char *s)
  */
 #define MAX_LINE_LENGTH_BYTES (64)
 #define DEFAULT_LINE_LENGTH_BYTES (16)
-int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen)
+int print_buffer(ulong addr, const void *data, uint width, uint count,
+		 uint linelen)
 {
 	/* linebuf as a union causes proper alignment */
 	union linebuf {
Signature · 1 line
1.7.7.3
author Applied
#4 lore raw

PATCH 2/20 Update print_buffer() to use const

Quoted 5 lines · Simon Glass

The buffer cannot be changed by this function, so change the buffer pointer to a const. This allows callers with const pointer to use the function without a cast.

Applied to x86/master.

#5 lore raw

PATCH 3/20 sandbox: Improve sandbox serial port keyboard interface

In reply to Simon Glass

From: Taylor Hutt <[email protected]>

Implements the tstc() interface for the serial driver. Multiplexing the console between the serial port and a keyboard uses a polling method of checking if characters are available; this means that the serial console must be non-blocking when attempting to read characters.

---
 arch/sandbox/cpu/os.c    |    8 ++++++++
 drivers/serial/sandbox.c |   44 ++++++++++++++++++++++++++++++++++++++------
 include/os.h             |   10 ++++++++++
 3 files changed, 56 insertions(+), 6 deletions(-)
arch/sandbox/cpu/os.c +8 -0
index 36637af..3e37c93 100644
@@ -44,6 +44,14 @@ ssize_t os_read(int fd, void *buf, size_t count)
 	return read(fd, buf, count);
 }
 
+ssize_t os_read_no_block(int fd, void *buf, size_t count)
+{
+	const int flags = fcntl(fd, F_GETFL, 0);
+
+	fcntl(fd, F_SETFL, flags | O_NONBLOCK);
+	return os_read(fd, buf, count);
+}
+
 ssize_t os_write(int fd, const void *buf, size_t count)
 {
 	return write(fd, buf, count);
drivers/serial/sandbox.c +38 -6

62 lines not on this page · raw message

include/os.h +10 -0
index 699682a..c452d1b 100644
@@ -40,6 +40,16 @@ struct sandbox_state;
 ssize_t os_read(int fd, void *buf, size_t count);
 
 /**
+ * Access to the OS read() system call with non-blocking access
+ *
+ * \param fd	File descriptor as returned by os_open()
+ * \param buf	Buffer to place data
+ * \param count	Number of bytes to read
+ * \return number of bytes read, or -1 on error
+ */
+ssize_t os_read_no_block(int fd, void *buf, size_t count);
+
+/**
  * Access to the OS write() system call
  *
  * \param fd	File descriptor as returned by os_open()
Signature · 1 line
1.7.7.3
author Applied
#6 lore raw

PATCH 3/20 sandbox: Improve sandbox serial port keyboard interface

Quoted 10 lines · Simon Glass

From: Taylor Hutt <[email protected]>

Implements the tstc() interface for the serial driver. Multiplexing the console between the serial port and a keyboard uses a polling method of checking if characters are available; this means that the serial console must be non-blocking when attempting to read characters.

Applied to x86/master.

#7 lore raw

PATCH 4/20 sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf

In reply to Simon Glass

Sandbox doesn't actually provide U-Boot access to the machine's physical memory. Instead it provides a RAM buffer of configurable size, and all memory accesses are within that buffer. Sandbox memory starts at 0 and is CONFIG_DRAM_SIZE bytes in size. Allowing access outside this buffer might produce unpredictable results in the event of an error, and would expose the host machine's memory architecture to the sandbox U-Boot.

Most U-Boot functions assume that they can just access memory at given address. For sandbox this is not true.

Add a map_sysmem() call which converts a U-Boot address to a system address. In most cases this is a NOP, but for sandbox it returns a pointer to that memory inside the RAM buffer.

To get a U-Boot feature to work correctly within sandbox, you should call map_sysmem() to get a pointer to the address, and then use that address for any U-Boot memory accesses.

---
 README                        |    9 +++++++++
 arch/sandbox/config.mk        |    1 +
 arch/sandbox/include/asm/io.h |   10 ++++++++++
 include/common.h              |   12 ++++++++++++
 4 files changed, 32 insertions(+), 0 deletions(-)
README +9 -0
index 78f40df..8dd3867 100644
@@ -3769,6 +3769,15 @@ Low Level (hardware related) configuration options:
 		that is executed before the actual U-Boot. E.g. when
 		compiling a NAND SPL.
 
+- CONFIG_ARCH_MAP_SYSMEM
+		Generally U-Boot (and in particular the md command) uses
+		effective address. It is therefore not necessary to regard
+		U-Boot address as virtual addresses that need to be translated
+		to physical addresses. However, sandbox requires this, since
+		it maintains its own little RAM buffer which contains all
+		addressable memory. This option causes some memory accesses
+		to be mapped through map_sysmem() / unmap_sysmem().
+
 - CONFIG_USE_ARCH_MEMCPY
   CONFIG_USE_ARCH_MEMSET
 		If these options are used a optimized version of memcpy/memset will
arch/sandbox/config.mk +1 -0
index 02ce4a4..4fd0d4e 100644
@@ -18,4 +18,5 @@
 # MA 02111-1307 USA
 
 PLATFORM_CPPFLAGS += -DCONFIG_SANDBOX -D__SANDBOX__ -U_FORTIFY_SOURCE
+PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM
 PLATFORM_LIBS += -lrt
arch/sandbox/include/asm/io.h +10 -0
index 0392d21..d8c0236 100644
@@ -39,3 +39,13 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 {
 
 }
+
+/* For sandbox, we want addresses to point into our RAM buffer */
+static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
+{
+	return map_physmem(paddr, len, MAP_WRBACK);
+}
+
+static inline void unmap_sysmem(const void *vaddr)
+{
+}
include/common.h +12 -0
index f2035c0..08d01db 100644
@@ -861,6 +861,18 @@ int cpu_disable(int nr);
 int cpu_release(int nr, int argc, char * const argv[]);
 #endif
 
+/* Define a null map_sysmem() if the architecture doesn't use it */
+# ifndef CONFIG_ARCH_MAP_SYSMEM
+static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
+{
+	return (void *)(uintptr_t)paddr;
+}
+
+static inline void unmap_sysmem(const void *vaddr)
+{
+}
+# endif
+
 #endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_PPC
Signature · 1 line
1.7.7.3
author Applied
#8 lore raw

PATCH 4/20 sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf

Quoted 14 lines · Simon Glass

Sandbox doesn't actually provide U-Boot access to the machine's physical memory. Instead it provides a RAM buffer of configurable size, and all memory accesses are within that buffer. Sandbox memory starts at 0 and is CONFIG_DRAM_SIZE bytes in size. Allowing access outside this buffer might produce unpredictable results in the event of an error, and would expose the host machine's memory architecture to the sandbox U-Boot.

Most U-Boot functions assume that they can just access memory at given address. For sandbox this is not true.

Add a map_sysmem() call which converts a U-Boot address to a system address. In most cases this is a NOP, but for sandbox it returns a pointer to that memory inside the RAM buffer.

Quoted 5 lines

To get a U-Boot feature to work correctly within sandbox, you should call map_sysmem() to get a pointer to the address, and then use that address for any U-Boot memory accesses.

I haven't seen any comments on this one, either because no one noticed or because it is OK. I am collecting up this series and will send a pull request, for Tom to review.

Applied to x86/master.

#9 lore raw

PATCH 5/20 sandbox: Change memory commands to use map_physmem

In reply to Simon Glass

Sandbox wants to support commands which use memory. The map_sysmen() call provides this feature, so use this in the memory commands.

---
 common/cmd_mem.c |  122 +++++++++++++++++++++++++++++++++++-------------------
 1 files changed, 79 insertions(+), 43 deletions(-)
common/cmd_mem.c +79 -43
index 4d64cff..e2adea9 100644
@@ -33,6 +33,7 @@
 #include <dataflash.h>
 #endif
 #include <watchdog.h>
+#include <asm/io.h>
 
 static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
 
@@ -135,9 +136,13 @@ static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 # endif
 
 	{
+		ulong bytes = size * length;
+		const void *buf = map_sysmem(addr, bytes);
+
 		/* Print the lines. */
-		print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
-		addr += size*length;
+		print_buffer(addr, buf, size, length, DISP_LINE_LEN / size);
+		addr += bytes;
+		unmap_sysmem(buf);
 	}
 #endif
 
@@ -160,6 +165,8 @@ static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr, writeval, count;
 	int	size;
+	void *buf;
+	ulong bytes;
 
 	if ((argc < 3) || (argc > 4))
 		return CMD_RET_USAGE;
@@ -185,15 +192,18 @@ static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		count = 1;
 	}
 
+	bytes = size * count;
+	buf = map_sysmem(addr, bytes);
 	while (count-- > 0) {
 		if (size == 4)
-			*((ulong  *)addr) = (ulong )writeval;
+			*((ulong *)buf) = (ulong)writeval;
 		else if (size == 2)
-			*((ushort *)addr) = (ushort)writeval;
+			*((ushort *)buf) = (ushort)writeval;
 		else
-			*((u_char *)addr) = (u_char)writeval;
-		addr += size;
+			*((u_char *)buf) = (u_char)writeval;
+		buf += size;
 	}
+	unmap_sysmem(buf);
 	return 0;
 }
 
@@ -255,10 +265,11 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong	addr1, addr2, count, ngood;
+	ulong	addr1, addr2, count, ngood, bytes;
 	int	size;
 	int     rcode = 0;
 	const char *type;
+	const void *buf1, *buf2, *base;
 
 	if (argc != 4)
 		return CMD_RET_USAGE;
@@ -291,33 +302,40 @@ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 #endif
 
+	bytes = size * count;
+	base = buf1 = map_sysmem(addr1, bytes);
+	buf2 = map_sysmem(addr2, bytes);
 	for (ngood = 0; ngood < count; ++ngood) {
 		ulong word1, word2;
 		if (size == 4) {
-			word1 = *(ulong *)addr1;
-			word2 = *(ulong *)addr2;
+			word1 = *(ulong *)buf1;
+			word2 = *(ulong *)buf2;
 		} else if (size == 2) {
-			word1 = *(ushort *)addr1;
-			word2 = *(ushort *)addr2;
+			word1 = *(ushort *)buf1;
+			word2 = *(ushort *)buf2;
 		} else {
-			word1 = *(u_char *)addr1;
-			word2 = *(u_char *)addr2;
+			word1 = *(u_char *)buf1;
+			word2 = *(u_char *)buf2;
 		}
 		if (word1 != word2) {
+			ulong offset = buf1 - base;
+
 			printf("%s at 0x%08lx (%#0*lx) != %s@0x%08lx (%#0*lx)\n",
-				type, addr1, size, word1,
-				type, addr2, size, word2);
+				type, (ulong)(addr1 + offset), size, word1,
+				type, (ulong)(addr2 + offset), size, word2);
 			rcode = 1;
 			break;
 		}
 
-		addr1 += size;
-		addr2 += size;
+		buf1 += size;
+		buf2 += size;
 
 		/* reset watchdog from time to time */
 		if ((ngood % (64 << 10)) == 0)
 			WATCHDOG_RESET();
 	}
+	unmap_sysmem(buf1);
+	unmap_sysmem(buf2);
 
 	printf("Total of %ld %s(s) were the same\n", ngood, type);
 	return rcode;
@@ -325,8 +343,10 @@ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong	addr, dest, count;
+	ulong	addr, dest, count, bytes;
 	int	size;
+	const void *src;
+	void *buf;
 
 	if (argc != 4)
 		return CMD_RET_USAGE;
@@ -416,15 +436,18 @@ static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 #endif
 
+	bytes = size * count;
+	buf = map_sysmem(addr, bytes);
+	src = map_sysmem(addr, bytes);
 	while (count-- > 0) {
 		if (size == 4)
-			*((ulong  *)dest) = *((ulong  *)addr);
+			*((ulong *)buf) = *((ulong  *)src);
 		else if (size == 2)
-			*((ushort *)dest) = *((ushort *)addr);
+			*((ushort *)buf) = *((ushort *)src);
 		else
-			*((u_char *)dest) = *((u_char *)addr);
-		addr += size;
-		dest += size;
+			*((u_char *)buf) = *((u_char *)src);
+		src += size;
+		buf += size;
 
 		/* reset watchdog from time to time */
 		if ((count % (64 << 10)) == 0)
@@ -450,11 +473,12 @@ static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc,
 static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
 		       char * const argv[])
 {
-	ulong	addr, length, i;
+	ulong	addr, length, i, bytes;
 	int	size;
 	volatile uint	*longp;
 	volatile ushort *shortp;
 	volatile u_char	*cp;
+	const void *buf;
 
 	if (argc < 3)
 		return CMD_RET_USAGE;
@@ -473,28 +497,31 @@ static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
 	*/
 	length = simple_strtoul(argv[2], NULL, 16);
 
+	bytes = size * length;
+	buf = map_sysmem(addr, bytes);
+
 	/* We want to optimize the loops to run as fast as possible.
 	 * If we have only one object, just run infinite loops.
 	 */
 	if (length == 1) {
 		if (size == 4) {
-			longp = (uint *)addr;
+			longp = (uint *)buf;
 			for (;;)
 				i = *longp;
 		}
 		if (size == 2) {
-			shortp = (ushort *)addr;
+			shortp = (ushort *)buf;
 			for (;;)
 				i = *shortp;
 		}
-		cp = (u_char *)addr;
+		cp = (u_char *)buf;
 		for (;;)
 			i = *cp;
 	}
 
 	if (size == 4) {
 		for (;;) {
-			longp = (uint *)addr;
+			longp = (uint *)buf;
 			i = length;
 			while (i-- > 0)
 				*longp++;
@@ -502,28 +529,30 @@ static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
 	}
 	if (size == 2) {
 		for (;;) {
-			shortp = (ushort *)addr;
+			shortp = (ushort *)buf;
 			i = length;
 			while (i-- > 0)
 				*shortp++;
 		}
 	}
 	for (;;) {
-		cp = (u_char *)addr;
+		cp = (u_char *)buf;
 		i = length;
 		while (i-- > 0)
 			*cp++;
 	}
+	unmap_sysmem(buf);
 }
 
 #ifdef CONFIG_LOOPW
 int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong	addr, length, i, data;
+	ulong	addr, length, i, data, bytes;
 	int	size;
 	volatile uint	*longp;
 	volatile ushort *shortp;
 	volatile u_char	*cp;
+	void *buf;
 
 	if (argc < 4)
 		return CMD_RET_USAGE;
@@ -545,28 +574,31 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	/* data to write */
 	data = simple_strtoul(argv[3], NULL, 16);
 
+	bytes = size * length;
+	buf = map_sysmem(addr, bytes);
+
 	/* We want to optimize the loops to run as fast as possible.
 	 * If we have only one object, just run infinite loops.
 	 */
 	if (length == 1) {
 		if (size == 4) {
-			longp = (uint *)addr;
+			longp = (uint *)buf;
 			for (;;)
 				*longp = data;
 					}
 		if (size == 2) {
-			shortp = (ushort *)addr;
+			shortp = (ushort *)buf;
 			for (;;)
 				*shortp = data;
 		}
-		cp = (u_char *)addr;
+		cp = (u_char *)buf;
 		for (;;)
 			*cp = data;
 	}
 
 	if (size == 4) {
 		for (;;) {
-			longp = (uint *)addr;
+			longp = (uint *)buf;
 			i = length;
 			while (i-- > 0)
 				*longp++ = data;
@@ -574,14 +606,14 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 	if (size == 2) {
 		for (;;) {
-			shortp = (ushort *)addr;
+			shortp = (ushort *)buf;
 			i = length;
 			while (i-- > 0)
 				*shortp++ = data;
 		}
 	}
 	for (;;) {
-		cp = (u_char *)addr;
+		cp = (u_char *)buf;
 		i = length;
 		while (i-- > 0)
 			*cp++ = data;
@@ -957,6 +989,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 {
 	ulong	addr, i;
 	int	nbytes, size;
+	void *ptr = NULL;
 
 	if (argc != 2)
 		return CMD_RET_USAGE;
@@ -1001,13 +1034,14 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 	 * the next value.  A non-converted value exits.
 	 */
 	do {
+		ptr = map_sysmem(addr, size);
 		printf("%08lx:", addr);
 		if (size == 4)
-			printf(" %08x", *((uint   *)addr));
+			printf(" %08x", *((uint *)ptr));
 		else if (size == 2)
-			printf(" %04x", *((ushort *)addr));
+			printf(" %04x", *((ushort *)ptr));
 		else
-			printf(" %02x", *((u_char *)addr));
+			printf(" %02x", *((u_char *)ptr));
 
 		nbytes = readline (" ? ");
 		if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
@@ -1037,16 +1071,18 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 				reset_cmd_timeout();
 #endif
 				if (size == 4)
-					*((uint   *)addr) = i;
+					*((uint *)ptr) = i;
 				else if (size == 2)
-					*((ushort *)addr) = i;
+					*((ushort *)ptr) = i;
 				else
-					*((u_char *)addr) = i;
+					*((u_char *)ptr) = i;
 				if (incrflag)
 					addr += size;
 			}
 		}
 	} while (nbytes);
+	if (ptr)
+		unmap_sysmem(ptr);
 
 	mm_last_addr = addr;
 	mm_last_size = size;
Signature · 1 line
1.7.7.3
author Applied
#10 lore raw

PATCH 5/20 sandbox: Change memory commands to use map_physmem

Quoted 4 lines · Simon Glass

Sandbox wants to support commands which use memory. The map_sysmen() call provides this feature, so use this in the memory commands.

Applied to x86/master.

Quoted 4 lines
---
 common/cmd_mem.c |  122 +++++++++++++++++++++++++++++++++++-------------------
 1 files changed, 79 insertions(+), 43 deletions(-)
#11 lore raw

PATCH 6/20 Split out the memory tests into separate functions

In reply to Simon Glass

Half of the code is currently hidden behind an #ifdef. Move the two memory tests into their own functions and use the compiler to eliminate the unused code.

---
 common/cmd_mem.c |  217 +++++++++++++++++++++++++++++-------------------------
 1 files changed, 116 insertions(+), 101 deletions(-)
common/cmd_mem.c +116 -101
index e2adea9..36ac6f4 100644
@@ -621,36 +621,26 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 #endif /* CONFIG_LOOPW */
 
-/*
- * Perform a memory test. A more complete alternative test can be
- * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
- * interrupted by ctrl-c or by a failure of one of the sub-tests.
- */
-static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
-			char * const argv[])
+static int mem_test_alt(vu_long *start, vu_long *end,
+			  int iteration_limit)
 {
-	vu_long	*addr, *start, *end;
-	ulong	val;
-	ulong	readback;
-	ulong	errs = 0;
+	vu_long *addr;
 	int iterations = 1;
-	int iteration_limit;
-
-#if defined(CONFIG_SYS_ALT_MEMTEST)
-	vu_long	len;
-	vu_long	offset;
-	vu_long	test_offset;
-	vu_long	pattern;
-	vu_long	temp;
-	vu_long	anti_pattern;
-	vu_long	num_words;
+	ulong errs = 0;
+	ulong val, readback;
+	int j;
+	vu_long len;
+	vu_long offset;
+	vu_long test_offset;
+	vu_long pattern;
+	vu_long temp;
+	vu_long anti_pattern;
+	vu_long num_words;
 #if defined(CONFIG_SYS_MEMTEST_SCRATCH)
-	vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
+	vu_long *dummy = (vu_long *)CONFIG_SYS_MEMTEST_SCRATCH;
 #else
 	vu_long *dummy = NULL;	/* yes, this is address 0x0, not NULL */
 #endif
-	int	j;
-
 	static const ulong bitpattern[] = {
 		0x00000001,	/* single bit */
 		0x00000003,	/* two adjacent bits */
@@ -661,43 +651,18 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		0x00000055,	/* four non-adjacent bits */
 		0xaaaaaaaa,	/* alternating 1/0 */
 	};
-#else
-	ulong	incr;
-	ulong	pattern;
-#endif
 
-	if (argc > 1)
-		start = (ulong *)simple_strtoul(argv[1], NULL, 16);
-	else
-		start = (ulong *)CONFIG_SYS_MEMTEST_START;
-
-	if (argc > 2)
-		end = (ulong *)simple_strtoul(argv[2], NULL, 16);
-	else
-		end = (ulong *)(CONFIG_SYS_MEMTEST_END);
-
-	if (argc > 3)
-		pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
-	else
-		pattern = 0;
-
-	if (argc > 4)
-		iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16);
-	else
-		iteration_limit = 0;
-
-#if defined(CONFIG_SYS_ALT_MEMTEST)
-	printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end);
+	printf("Testing %08x ... %08x:\n", (uint)(uintptr_t)start,
+	       (uint)(uintptr_t)end);
 	debug("%s:%d: start 0x%p end 0x%p\n",
-		__FUNCTION__, __LINE__, start, end);
+		__func__, __LINE__, start, end);
 
 	for (;;) {
 		if (ctrlc()) {
-			putc ('\n');
+			putc('\n');
 			return 1;
 		}
 
-
 		if (iteration_limit && iterations > iteration_limit) {
 			printf("Tested %d iteration(s) with %lu errors.\n",
 				iterations-1, errs);
@@ -726,34 +691,35 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		 * pattern and ~pattern).
 		 */
 		addr = start;
-		for (j = 0; j < sizeof(bitpattern)/sizeof(bitpattern[0]); j++) {
+		for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]);
+				j++) {
 		    val = bitpattern[j];
-		    for(; val != 0; val <<= 1) {
+		    for (; val != 0; val <<= 1) {
 			*addr  = val;
-			*dummy  = ~val; /* clear the test data off of the bus */
+			*dummy  = ~val; /* clear the test data off the bus */
 			readback = *addr;
 			if(readback != val) {
-			    printf ("FAILURE (data line): "
-				"expected %08lx, actual %08lx\n",
-					  val, readback);
-			    errs++;
-			    if (ctrlc()) {
-				putc ('\n');
-				return 1;
-			    }
+				printf("FAILURE (data line): "
+					"expected %08lx, actual %08lx\n",
+						val, readback);
+				errs++;
+				if (ctrlc()) {
+					putc('\n');
+					return 1;
+				}
 			}
 			*addr  = ~val;
 			*dummy  = val;
 			readback = *addr;
-			if(readback != ~val) {
-			    printf ("FAILURE (data line): "
-				"Is %08lx, should be %08lx\n",
-					readback, ~val);
-			    errs++;
-			    if (ctrlc()) {
-				putc ('\n');
-				return 1;
-			    }
+			if (readback != ~val) {
+				printf("FAILURE (data line): "
+					"Is %08lx, should be %08lx\n",
+						readback, ~val);
+				errs++;
+				if (ctrlc()) {
+					putc('\n');
+					return 1;
+				}
 			}
 		    }
 		}
@@ -797,15 +763,13 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		anti_pattern = (vu_long) 0x55555555;
 
 		debug("%s:%d: length = 0x%.8lx\n",
-			__FUNCTION__, __LINE__,
-			len);
+			__func__, __LINE__, len);
 		/*
 		 * Write the default pattern@each of the
 		 * power-of-two offsets.
 		 */
-		for (offset = 1; offset < len; offset <<= 1) {
+		for (offset = 1; offset < len; offset <<= 1)
 			start[offset] = pattern;
-		}
 
 		/*
 		 * Check for address bits stuck high.
@@ -816,12 +780,12 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		for (offset = 1; offset < len; offset <<= 1) {
 		    temp = start[offset];
 		    if (temp != pattern) {
-			printf ("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
+			printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx\n",
 				(ulong)&start[offset], pattern, temp);
 			errs++;
 			if (ctrlc()) {
-			    putc ('\n');
+			    putc('\n');
 			    return 1;
 			}
 		    }
@@ -838,12 +802,12 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		    for (offset = 1; offset < len; offset <<= 1) {
 			temp = start[offset];
 			if ((temp != pattern) && (offset != test_offset)) {
-			    printf ("\nFAILURE: Address bit stuck low or shorted @"
+			    printf("\nFAILURE: Address bit stuck low or shorted @"
 				" 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
 				(ulong)&start[offset], pattern, temp);
 			    errs++;
 			    if (ctrlc()) {
-				putc ('\n');
+				putc('\n');
 				return 1;
 			    }
 			}
@@ -880,13 +844,13 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		    WATCHDOG_RESET();
 		    temp = start[offset];
 		    if (temp != pattern) {
-			printf ("\nFAILURE (read/write) @ 0x%.8lx:"
+			printf("\nFAILURE (read/write) @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], pattern, temp);
 			errs++;
 			if (ctrlc()) {
-			    putc ('\n');
-			    return 1;
+				putc('\n');
+				return 1;
 			}
 		    }
 
@@ -902,24 +866,33 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		    anti_pattern = ~pattern;
 		    temp = start[offset];
 		    if (temp != anti_pattern) {
-			printf ("\nFAILURE (read/write): @ 0x%.8lx:"
+			printf("\nFAILURE (read/write): @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], anti_pattern, temp);
 			errs++;
 			if (ctrlc()) {
-			    putc ('\n');
-			    return 1;
+				putc('\n');
+				return 1;
 			}
 		    }
 		    start[offset] = 0;
 		}
 	}
+}
+
+static int mem_test_quick(vu_long *start, vu_long *end,
+			  int iteration_limit, vu_long pattern)
+{
+	vu_long *addr;
+	int iterations = 1;
+	ulong errs = 0;
+	ulong incr;
+	ulong val, readback;
 
-#else /* The original, quickie test */
 	incr = 1;
 	for (;;) {
 		if (ctrlc()) {
-			putc ('\n');
+			putc('\n');
 			return 1;
 		}
 
@@ -930,29 +903,29 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		}
 		++iterations;
 
-		printf ("\rPattern %08lX  Writing..."
+		printf("\rPattern %08lX  Writing..."
 			"%12s"
 			"\b\b\b\b\b\b\b\b\b\b",
 			pattern, "");
 
-		for (addr=start,val=pattern; addr<end; addr++) {
+		for (addr = start, val = pattern; addr < end; addr++) {
 			WATCHDOG_RESET();
 			*addr = val;
-			val  += incr;
+			val += incr;
 		}
 
-		puts ("Reading...");
+		puts("Reading...");
 
-		for (addr=start,val=pattern; addr<end; addr++) {
+		for (addr = start, val = pattern; addr < end; addr++) {
 			WATCHDOG_RESET();
 			readback = *addr;
 			if (readback != val) {
-				printf ("\nMem error @ 0x%08X: "
+				printf("\nMem error @ 0x%08X: "
 					"found %08lX, expected %08lX\n",
 					(uint)(uintptr_t)addr, readback, val);
 				errs++;
 				if (ctrlc()) {
-					putc ('\n');
+					putc('\n');
 					return 1;
 				}
 			}
@@ -965,16 +938,58 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 		 * the "negative" patterns and increment the "positive"
 		 * patterns to preserve this feature.
 		 */
-		if(pattern & 0x80000000) {
+		if (pattern & 0x80000000)
 			pattern = -pattern;	/* complement & increment */
-		}
-		else {
+		else
 			pattern = ~pattern;
-		}
 		incr = -incr;
 	}
+}
+
+/*
+ * Perform a memory test. A more complete alternative test can be
+ * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
+ * interrupted by ctrl-c or by a failure of one of the sub-tests.
+ */
+static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[])
+{
+	vu_long *start, *end;
+	int iteration_limit;
+	int ret;
+	ulong pattern;
+#if defined(CONFIG_SYS_ALT_MEMTEST)
+	const int alt_test = 1;
+#else
+	const int alt_test = 0;
 #endif
-	return 0;	/* not reached */
+
+	if (argc > 1)
+		start = (ulong *)simple_strtoul(argv[1], NULL, 16);
+	else
+		start = (ulong *)CONFIG_SYS_MEMTEST_START;
+
+	if (argc > 2)
+		end = (ulong *)simple_strtoul(argv[2], NULL, 16);
+	else
+		end = (ulong *)(CONFIG_SYS_MEMTEST_END);
+
+	if (argc > 3)
+		pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
+	else
+		pattern = 0;
+
+	if (argc > 4)
+		iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16);
+	else
+		iteration_limit = 0;
+
+	if (alt_test)
+		ret = mem_test_alt(start, end, iteration_limit);
+	else
+		ret = mem_test_quick(start, end, iteration_limit, pattern);
+
+	return ret;	/* not reached */
 }
 
 
Signature · 1 line
1.7.7.3
author Applied
#12 lore raw

PATCH 6/20 Split out the memory tests into separate functions

Quoted 5 lines · Simon Glass

Half of the code is currently hidden behind an #ifdef. Move the two memory tests into their own functions and use the compiler to eliminate the unused code.

Applied to x86/master.

Quoted 4 lines
---
 common/cmd_mem.c |  217 +++++++++++++++++++++++++++++-------------------------
 1 files changed, 116 insertions(+), 101 deletions(-)
#13 lore raw

PATCH 7/20 Use common mtest iteration counting

In reply to Simon Glass

The iteration code is the same for each version of the memory test, so pull it out into the common function.

---
 common/cmd_mem.c |  123 ++++++++++++++++++++++++++----------------------------
 1 files changed, 59 insertions(+), 64 deletions(-)
common/cmd_mem.c +59 -64
index 36ac6f4..41c1e70 100644
@@ -621,11 +621,9 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 #endif /* CONFIG_LOOPW */
 
-static int mem_test_alt(vu_long *start, vu_long *end,
-			  int iteration_limit)
+static ulong mem_test_alt(vu_long *start, vu_long *end)
 {
 	vu_long *addr;
-	int iterations = 1;
 	ulong errs = 0;
 	ulong val, readback;
 	int j;
@@ -652,27 +650,6 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 		0xaaaaaaaa,	/* alternating 1/0 */
 	};
 
-	printf("Testing %08x ... %08x:\n", (uint)(uintptr_t)start,
-	       (uint)(uintptr_t)end);
-	debug("%s:%d: start 0x%p end 0x%p\n",
-		__func__, __LINE__, start, end);
-
-	for (;;) {
-		if (ctrlc()) {
-			putc('\n');
-			return 1;
-		}
-
-		if (iteration_limit && iterations > iteration_limit) {
-			printf("Tested %d iteration(s) with %lu errors.\n",
-				iterations-1, errs);
-			return errs != 0;
-		}
-
-		printf("Iteration: %6d\r", iterations);
-		debug("\n");
-		iterations++;
-
 		/*
 		 * Data line test: write a pattern to the first
 		 * location, write the 1's complement to a 'parking'
@@ -705,7 +682,7 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 				errs++;
 				if (ctrlc()) {
 					putc('\n');
-					return 1;
+					return -1;
 				}
 			}
 			*addr  = ~val;
@@ -718,7 +695,7 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 				errs++;
 				if (ctrlc()) {
 					putc('\n');
-					return 1;
+					return -1;
 				}
 			}
 		    }
@@ -786,7 +763,7 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 			errs++;
 			if (ctrlc()) {
 			    putc('\n');
-			    return 1;
+			    return -1;
 			}
 		    }
 		}
@@ -808,7 +785,7 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 			    errs++;
 			    if (ctrlc()) {
 				putc('\n');
-				return 1;
+				return -1;
 			    }
 			}
 		    }
@@ -850,7 +827,7 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 			errs++;
 			if (ctrlc()) {
 				putc('\n');
-				return 1;
+				return -1;
 			}
 		    }
 
@@ -872,37 +849,38 @@ static int mem_test_alt(vu_long *start, vu_long *end,
 			errs++;
 			if (ctrlc()) {
 				putc('\n');
-				return 1;
+				return -1;
 			}
 		    }
 		    start[offset] = 0;
 		}
-	}
+
+	return 0;
 }
 
-static int mem_test_quick(vu_long *start, vu_long *end,
-			  int iteration_limit, vu_long pattern)
+static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
+			    int iteration)
 {
 	vu_long *addr;
-	int iterations = 1;
 	ulong errs = 0;
 	ulong incr;
 	ulong val, readback;
 
+	/* Alternate the pattern */
 	incr = 1;
-	for (;;) {
-		if (ctrlc()) {
-			putc('\n');
-			return 1;
-		}
-
-		if (iteration_limit && iterations > iteration_limit) {
-			printf("Tested %d iteration(s) with %lu errors.\n",
-				iterations-1, errs);
-			return errs != 0;
-		}
-		++iterations;
-
+	if (iteration & 1) {
+		incr = -incr;
+		/*
+		 * Flip the pattern each time to make lots of zeros and
+		 * then, the next time, lots of ones.  We decrement
+		 * the "negative" patterns and increment the "positive"
+		 * patterns to preserve this feature.
+		 */
+		if (pattern & 0x80000000)
+			pattern = -pattern;	/* complement & increment */
+		else
+			pattern = ~pattern;
+	}
 		printf("\rPattern %08lX  Writing..."
 			"%12s"
 			"\b\b\b\b\b\b\b\b\b\b",
@@ -926,24 +904,13 @@ static int mem_test_quick(vu_long *start, vu_long *end,
 				errs++;
 				if (ctrlc()) {
 					putc('\n');
-					return 1;
+					return -1;
 				}
 			}
 			val += incr;
 		}
 
-		/*
-		 * Flip the pattern each time to make lots of zeros and
-		 * then, the next time, lots of ones.  We decrement
-		 * the "negative" patterns and increment the "positive"
-		 * patterns to preserve this feature.
-		 */
-		if (pattern & 0x80000000)
-			pattern = -pattern;	/* complement & increment */
-		else
-			pattern = ~pattern;
-		incr = -incr;
-	}
+	return 0;
 }
 
 /*
@@ -957,7 +924,9 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 	vu_long *start, *end;
 	int iteration_limit;
 	int ret;
+	ulong errs = 0;	/* number of errors, or -1 if interrupted */
 	ulong pattern;
+	int iteration;
 #if defined(CONFIG_SYS_ALT_MEMTEST)
 	const int alt_test = 1;
 #else
@@ -984,10 +953,36 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 	else
 		iteration_limit = 0;
 
-	if (alt_test)
-		ret = mem_test_alt(start, end, iteration_limit);
-	else
-		ret = mem_test_quick(start, end, iteration_limit, pattern);
+	printf("Testing %08x ... %08x:\n", (uint)(uintptr_t)start,
+	       (uint)(uintptr_t)end);
+	debug("%s:%d: start 0x%p end 0x%p\n",
+		__func__, __LINE__, start, end);
+
+	for (iteration = 0;
+			!iteration_limit || iteration < iteration_limit;
+			iteration++) {
+		if (ctrlc()) {
+			putc('\n');
+			errs = -1UL;
+			break;
+		}
+
+		printf("Iteration: %6d\r", iteration + 1);
+		debug("\n");
+		if (alt_test)
+			errs = mem_test_alt(start, end);
+		else
+			errs = mem_test_quick(start, end, pattern, iteration);
+	}
+
+	if (errs == -1UL) {
+		/* Memory test was aborted */
+		ret = 1;
+	} else {
+		printf("Tested %d iteration(s) with %lu errors.\n",
+			iteration, errs);
+		ret = errs != 0;
+	}
 
 	return ret;	/* not reached */
 }
Signature · 1 line
1.7.7.3
author Applied
#14 lore raw

PATCH 7/20 Use common mtest iteration counting

Quoted 4 lines · Simon Glass

The iteration code is the same for each version of the memory test, so pull it out into the common function.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |  123 ++++++++++++++++++++++++++----------------------------
 1 files changed, 59 insertions(+), 64 deletions(-)
#15 lore raw

PATCH 8/20 Fix mtest indenting

In reply to Simon Glass

Some of the inner loops are not indented correctly. Fix this.

---
 common/cmd_mem.c |  324 +++++++++++++++++++++++++++---------------------------
 1 files changed, 162 insertions(+), 162 deletions(-)
common/cmd_mem.c +162 -162
index 41c1e70..648f93b 100644
@@ -650,32 +650,31 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 		0xaaaaaaaa,	/* alternating 1/0 */
 	};
 
-		/*
-		 * Data line test: write a pattern to the first
-		 * location, write the 1's complement to a 'parking'
-		 * address (changes the state of the data bus so a
-		 * floating bus doen't give a false OK), and then
-		 * read the value back. Note that we read it back
-		 * into a variable because the next time we read it,
-		 * it might be right (been there, tough to explain to
-		 * the quality guys why it prints a failure when the
-		 * "is" and "should be" are obviously the same in the
-		 * error message).
-		 *
-		 * Rather than exhaustively testing, we test some
-		 * patterns by shifting '1' bits through a field of
-		 * '0's and '0' bits through a field of '1's (i.e.
-		 * pattern and ~pattern).
-		 */
-		addr = start;
-		for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]);
-				j++) {
-		    val = bitpattern[j];
-		    for (; val != 0; val <<= 1) {
+	/*
+	 * Data line test: write a pattern to the first
+	 * location, write the 1's complement to a 'parking'
+	 * address (changes the state of the data bus so a
+	 * floating bus doen't give a false OK), and then
+	 * read the value back. Note that we read it back
+	 * into a variable because the next time we read it,
+	 * it might be right (been there, tough to explain to
+	 * the quality guys why it prints a failure when the
+	 * "is" and "should be" are obviously the same in the
+	 * error message).
+	 *
+	 * Rather than exhaustively testing, we test some
+	 * patterns by shifting '1' bits through a field of
+	 * '0's and '0' bits through a field of '1's (i.e.
+	 * pattern and ~pattern).
+	 */
+	addr = start;
+	for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) {
+		val = bitpattern[j];
+		for (; val != 0; val <<= 1) {
 			*addr  = val;
 			*dummy  = ~val; /* clear the test data off the bus */
 			readback = *addr;
-			if(readback != val) {
+			if (readback != val) {
 				printf("FAILURE (data line): "
 					"expected %08lx, actual %08lx\n",
 						val, readback);
@@ -698,129 +697,130 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 					return -1;
 				}
 			}
-		    }
 		}
+	}
 
-		/*
-		 * Based on code whose Original Author and Copyright
-		 * information follows: Copyright (c) 1998 by Michael
-		 * Barr. This software is placed into the public
-		 * domain and may be used for any purpose. However,
-		 * this notice must not be changed or removed and no
-		 * warranty is either expressed or implied by its
-		 * publication or distribution.
-		 */
-
-		/*
-		 * Address line test
-		 *
-		 * Description: Test the address bus wiring in a
-		 *              memory region by performing a walking
-		 *              1's test on the relevant bits of the
-		 *              address and checking for aliasing.
-		 *              This test will find single-bit
-		 *              address failures such as stuck -high,
-		 *              stuck-low, and shorted pins. The base
-		 *              address and size of the region are
-		 *              selected by the caller.
-		 *
-		 * Notes:	For best results, the selected base
-		 *              address should have enough LSB 0's to
-		 *              guarantee single address bit changes.
-		 *              For example, to test a 64-Kbyte
-		 *              region, select a base address on a
-		 *              64-Kbyte boundary. Also, select the
-		 *              region size as a power-of-two if at
-		 *              all possible.
-		 *
-		 * Returns:     0 if the test succeeds, 1 if the test fails.
-		 */
-		len = ((ulong)end - (ulong)start)/sizeof(vu_long);
-		pattern = (vu_long) 0xaaaaaaaa;
-		anti_pattern = (vu_long) 0x55555555;
+	/*
+	 * Based on code whose Original Author and Copyright
+	 * information follows: Copyright (c) 1998 by Michael
+	 * Barr. This software is placed into the public
+	 * domain and may be used for any purpose. However,
+	 * this notice must not be changed or removed and no
+	 * warranty is either expressed or implied by its
+	 * publication or distribution.
+	 */
 
-		debug("%s:%d: length = 0x%.8lx\n",
-			__func__, __LINE__, len);
-		/*
-		 * Write the default pattern at each of the
-		 * power-of-two offsets.
-		 */
-		for (offset = 1; offset < len; offset <<= 1)
-			start[offset] = pattern;
+	/*
+	* Address line test
+
+	 * Description: Test the address bus wiring in a
+	 *              memory region by performing a walking
+	 *              1's test on the relevant bits of the
+	 *              address and checking for aliasing.
+	 *              This test will find single-bit
+	 *              address failures such as stuck -high,
+	 *              stuck-low, and shorted pins. The base
+	 *              address and size of the region are
+	 *              selected by the caller.
+
+	 * Notes:	For best results, the selected base
+	 *              address should have enough LSB 0's to
+	 *              guarantee single address bit changes.
+	 *              For example, to test a 64-Kbyte
+	 *              region, select a base address on a
+	 *              64-Kbyte boundary. Also, select the
+	 *              region size as a power-of-two if at
+	 *              all possible.
+	 *
+	 * Returns:     0 if the test succeeds, 1 if the test fails.
+	 */
+	len = ((ulong)end - (ulong)start)/sizeof(vu_long);
+	pattern = (vu_long) 0xaaaaaaaa;
+	anti_pattern = (vu_long) 0x55555555;
+
+	debug("%s:%d: length = 0x%.8lx\n",
+		__func__, __LINE__, len);
+	/*
+	 * Write the default pattern@each of the
+	 * power-of-two offsets.
+	 */
+	for (offset = 1; offset < len; offset <<= 1)
+		start[offset] = pattern;
 
-		/*
-		 * Check for address bits stuck high.
-		 */
-		test_offset = 0;
-		start[test_offset] = anti_pattern;
+	/*
+	 * Check for address bits stuck high.
+	 */
+	test_offset = 0;
+	start[test_offset] = anti_pattern;
 
-		for (offset = 1; offset < len; offset <<= 1) {
-		    temp = start[offset];
-		    if (temp != pattern) {
+	for (offset = 1; offset < len; offset <<= 1) {
+		temp = start[offset];
+		if (temp != pattern) {
 			printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx\n",
 				(ulong)&start[offset], pattern, temp);
 			errs++;
 			if (ctrlc()) {
-			    putc('\n');
-			    return -1;
+				putc('\n');
+				return -1;
 			}
-		    }
 		}
-		start[test_offset] = pattern;
-		WATCHDOG_RESET();
+	}
+	start[test_offset] = pattern;
+	WATCHDOG_RESET();
 
-		/*
-		 * Check for addr bits stuck low or shorted.
-		 */
-		for (test_offset = 1; test_offset < len; test_offset <<= 1) {
-		    start[test_offset] = anti_pattern;
+	/*
+	 * Check for addr bits stuck low or shorted.
+	 */
+	for (test_offset = 1; test_offset < len; test_offset <<= 1) {
+		start[test_offset] = anti_pattern;
 
-		    for (offset = 1; offset < len; offset <<= 1) {
+		for (offset = 1; offset < len; offset <<= 1) {
 			temp = start[offset];
 			if ((temp != pattern) && (offset != test_offset)) {
-			    printf("\nFAILURE: Address bit stuck low or shorted @"
-				" 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
-				(ulong)&start[offset], pattern, temp);
-			    errs++;
-			    if (ctrlc()) {
-				putc('\n');
-				return -1;
-			    }
+				printf("\nFAILURE: Address bit stuck low or"
+					" shorted @ 0x%.8lx: expected 0x%.8lx,"
+					" actual 0x%.8lx\n",
+					(ulong)&start[offset], pattern, temp);
+				errs++;
+				if (ctrlc()) {
+					putc('\n');
+					return -1;
+				}
 			}
-		    }
-		    start[test_offset] = pattern;
 		}
+		start[test_offset] = pattern;
+	}
 
-		/*
-		 * Description: Test the integrity of a physical
-		 *		memory device by performing an
-		 *		increment/decrement test over the
-		 *		entire region. In the process every
-		 *		storage bit in the device is tested
-		 *		as a zero and a one. The base address
-		 *		and the size of the region are
-		 *		selected by the caller.
-		 *
-		 * Returns:     0 if the test succeeds, 1 if the test fails.
-		 */
-		num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1;
+	/*
+	 * Description: Test the integrity of a physical
+	 *		memory device by performing an
+	 *		increment/decrement test over the
+	 *		entire region. In the process every
+	 *		storage bit in the device is tested
+	 *		as a zero and a one. The base address
+	 *		and the size of the region are
+	 *		selected by the caller.
+	 *
+	 * Returns:     0 if the test succeeds, 1 if the test fails.
+	 */
+	num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1;
 
-		/*
-		 * Fill memory with a known pattern.
-		 */
-		for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
-			WATCHDOG_RESET();
-			start[offset] = pattern;
-		}
+	/*
+	 * Fill memory with a known pattern.
+	 */
+	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+		WATCHDOG_RESET();
+		start[offset] = pattern;
+	}
 
-		/*
-		 * Check each location and invert it for the second pass.
-		 */
-		for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
-		    WATCHDOG_RESET();
-		    temp = start[offset];
-		    if (temp != pattern) {
+	/*
+	 * Check each location and invert it for the second pass.
+	 */
+	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+		WATCHDOG_RESET();
+		temp = start[offset];
+		if (temp != pattern) {
 			printf("\nFAILURE (read/write) @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], pattern, temp);
@@ -829,20 +829,20 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 				putc('\n');
 				return -1;
 			}
-		    }
-
-		    anti_pattern = ~pattern;
-		    start[offset] = anti_pattern;
 		}
 
-		/*
-		 * Check each location for the inverted pattern and zero it.
-		 */
-		for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
-		    WATCHDOG_RESET();
-		    anti_pattern = ~pattern;
-		    temp = start[offset];
-		    if (temp != anti_pattern) {
+		anti_pattern = ~pattern;
+		start[offset] = anti_pattern;
+	}
+
+	/*
+	 * Check each location for the inverted pattern and zero it.
+	 */
+	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+		WATCHDOG_RESET();
+		anti_pattern = ~pattern;
+		temp = start[offset];
+		if (temp != anti_pattern) {
 			printf("\nFAILURE (read/write): @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], anti_pattern, temp);
@@ -851,9 +851,9 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 				putc('\n');
 				return -1;
 			}
-		    }
-		    start[offset] = 0;
 		}
+		start[offset] = 0;
+	}
 
 	return 0;
 }
@@ -881,34 +881,34 @@ static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
 		else
 			pattern = ~pattern;
 	}
-		printf("\rPattern %08lX  Writing..."
-			"%12s"
-			"\b\b\b\b\b\b\b\b\b\b",
-			pattern, "");
+	printf("\rPattern %08lX  Writing..."
+		"%12s"
+		"\b\b\b\b\b\b\b\b\b\b",
+		pattern, "");
 
-		for (addr = start, val = pattern; addr < end; addr++) {
-			WATCHDOG_RESET();
-			*addr = val;
-			val += incr;
-		}
+	for (addr = start, val = pattern; addr < end; addr++) {
+		WATCHDOG_RESET();
+		*addr = val;
+		val += incr;
+	}
 
-		puts("Reading...");
+	puts("Reading...");
 
-		for (addr = start, val = pattern; addr < end; addr++) {
-			WATCHDOG_RESET();
-			readback = *addr;
-			if (readback != val) {
-				printf("\nMem error @ 0x%08X: "
-					"found %08lX, expected %08lX\n",
-					(uint)(uintptr_t)addr, readback, val);
-				errs++;
-				if (ctrlc()) {
-					putc('\n');
-					return -1;
-				}
+	for (addr = start, val = pattern; addr < end; addr++) {
+		WATCHDOG_RESET();
+		readback = *addr;
+		if (readback != val) {
+			printf("\nMem error @ 0x%08X: "
+				"found %08lX, expected %08lX\n",
+				(uint)(uintptr_t)addr, readback, val);
+			errs++;
+			if (ctrlc()) {
+				putc('\n');
+				return -1;
 			}
-			val += incr;
 		}
+		val += incr;
+	}
 
 	return 0;
 }
Signature · 1 line
1.7.7.3
author Applied
#16 lore raw

PATCH 8/20 Fix mtest indenting

Quoted 3 lines · Simon Glass

Some of the inner loops are not indented correctly. Fix this.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |  324 +++++++++++++++++++++++++++---------------------------
 1 files changed, 162 insertions(+), 162 deletions(-)
#17 lore raw

PATCH 9/20 Bring mtest putc() into common code

In reply to Simon Glass

If we get a Ctrl-C abort, we always print a newline. Move this repeated code out of the functions and into a single place in the caller.

---
 common/cmd_mem.c |   32 +++++++++-----------------------
 1 files changed, 9 insertions(+), 23 deletions(-)
common/cmd_mem.c +9 -23
index 648f93b..a2f6cda 100644
@@ -679,10 +679,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 					"expected %08lx, actual %08lx\n",
 						val, readback);
 				errs++;
-				if (ctrlc()) {
-					putc('\n');
+				if (ctrlc())
 					return -1;
-				}
 			}
 			*addr  = ~val;
 			*dummy  = val;
@@ -692,10 +690,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 					"Is %08lx, should be %08lx\n",
 						readback, ~val);
 				errs++;
-				if (ctrlc()) {
-					putc('\n');
+				if (ctrlc())
 					return -1;
-				}
 			}
 		}
 	}
@@ -760,10 +756,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 				" expected 0x%.8lx, actual 0x%.8lx\n",
 				(ulong)&start[offset], pattern, temp);
 			errs++;
-			if (ctrlc()) {
-				putc('\n');
+			if (ctrlc())
 				return -1;
-			}
 		}
 	}
 	start[test_offset] = pattern;
@@ -783,10 +777,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 					" actual 0x%.8lx\n",
 					(ulong)&start[offset], pattern, temp);
 				errs++;
-				if (ctrlc()) {
-					putc('\n');
+				if (ctrlc())
 					return -1;
-				}
 			}
 		}
 		start[test_offset] = pattern;
@@ -825,10 +817,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], pattern, temp);
 			errs++;
-			if (ctrlc()) {
-				putc('\n');
+			if (ctrlc())
 				return -1;
-			}
 		}
 
 		anti_pattern = ~pattern;
@@ -847,10 +837,8 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
 				(ulong)&start[offset], anti_pattern, temp);
 			errs++;
-			if (ctrlc()) {
-				putc('\n');
+			if (ctrlc())
 				return -1;
-			}
 		}
 		start[offset] = 0;
 	}
@@ -902,10 +890,8 @@ static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
 				"found %08lX, expected %08lX\n",
 				(uint)(uintptr_t)addr, readback, val);
 			errs++;
-			if (ctrlc()) {
-				putc('\n');
+			if (ctrlc())
 				return -1;
-			}
 		}
 		val += incr;
 	}
@@ -962,7 +948,6 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 			!iteration_limit || iteration < iteration_limit;
 			iteration++) {
 		if (ctrlc()) {
-			putc('\n');
 			errs = -1UL;
 			break;
 		}
@@ -976,7 +961,8 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 	}
 
 	if (errs == -1UL) {
-		/* Memory test was aborted */
+		/* Memory test was aborted - write a newline to finish off */
+		putc('\n');
 		ret = 1;
 	} else {
 		printf("Tested %d iteration(s) with %lu errors.\n",
Signature · 1 line
1.7.7.3
author Applied
#18 lore raw

PATCH 9/20 Bring mtest putc() into common code

Quoted 4 lines · Simon Glass

If we get a Ctrl-C abort, we always print a newline. Move this repeated code out of the functions and into a single place in the caller.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |   32 +++++++++-----------------------
 1 files changed, 9 insertions(+), 23 deletions(-)
#19 lore raw

PATCH 10/20 Reduce casting in mtest

In reply to Simon Glass

Use a ulong for the command arguments, and only cast to an address when needed. This fixes warnings in sandbox where pointers are typically 64 bits long.

---
 common/cmd_mem.c |   30 ++++++++++++++++++------------
 1 files changed, 18 insertions(+), 12 deletions(-)
common/cmd_mem.c +18 -12
index a2f6cda..c45a31e 100644
@@ -621,8 +621,9 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 #endif /* CONFIG_LOOPW */
 
-static ulong mem_test_alt(vu_long *start, vu_long *end)
+static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 {
+	vu_long *start, *end;
 	vu_long *addr;
 	ulong errs = 0;
 	ulong val, readback;
@@ -650,6 +651,9 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 		0xaaaaaaaa,	/* alternating 1/0 */
 	};
 
+	start = (vu_long *)start_addr;
+	end = (vu_long *)end_addr;
+
 	/*
 	 * Data line test: write a pattern to the first
 	 * location, write the 1's complement to a 'parking'
@@ -730,7 +734,7 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 	 *
 	 * Returns:     0 if the test succeeds, 1 if the test fails.
 	 */
-	len = ((ulong)end - (ulong)start)/sizeof(vu_long);
+	len = (end_addr - start_addr) / sizeof(vu_long);
 	pattern = (vu_long) 0xaaaaaaaa;
 	anti_pattern = (vu_long) 0x55555555;
 
@@ -846,9 +850,10 @@ static ulong mem_test_alt(vu_long *start, vu_long *end)
 	return 0;
 }
 
-static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
+static ulong mem_test_quick(ulong start_addr, ulong end_addr, vu_long pattern,
 			    int iteration)
 {
+	vu_long *start, *end;
 	vu_long *addr;
 	ulong errs = 0;
 	ulong incr;
@@ -869,6 +874,8 @@ static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
 		else
 			pattern = ~pattern;
 	}
+	start = (vu_long *)start_addr;
+	end = (vu_long *)end_addr;
 	printf("\rPattern %08lX  Writing..."
 		"%12s"
 		"\b\b\b\b\b\b\b\b\b\b",
@@ -907,7 +914,7 @@ static ulong mem_test_quick(vu_long *start, vu_long *end, vu_long pattern,
 static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 			char * const argv[])
 {
-	vu_long *start, *end;
+	ulong start, end;
 	int iteration_limit;
 	int ret;
 	ulong errs = 0;	/* number of errors, or -1 if interrupted */
@@ -920,14 +927,14 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 #endif
 
 	if (argc > 1)
-		start = (ulong *)simple_strtoul(argv[1], NULL, 16);
+		start = simple_strtoul(argv[1], NULL, 16);
 	else
-		start = (ulong *)CONFIG_SYS_MEMTEST_START;
+		start = CONFIG_SYS_MEMTEST_START;
 
 	if (argc > 2)
-		end = (ulong *)simple_strtoul(argv[2], NULL, 16);
+		end = simple_strtoul(argv[2], NULL, 16);
 	else
-		end = (ulong *)(CONFIG_SYS_MEMTEST_END);
+		end = CONFIG_SYS_MEMTEST_END;
 
 	if (argc > 3)
 		pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
@@ -939,10 +946,9 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 	else
 		iteration_limit = 0;
 
-	printf("Testing %08x ... %08x:\n", (uint)(uintptr_t)start,
-	       (uint)(uintptr_t)end);
-	debug("%s:%d: start 0x%p end 0x%p\n",
-		__func__, __LINE__, start, end);
+	printf("Testing %08x ... %08x:\n", (uint)start, (uint)end);
+	debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__,
+	      start, end);
 
 	for (iteration = 0;
 			!iteration_limit || iteration < iteration_limit;
Signature · 1 line
1.7.7.3
author Applied
#20 lore raw

PATCH 10/20 Reduce casting in mtest

Quoted 5 lines · Simon Glass

Use a ulong for the command arguments, and only cast to an address when needed. This fixes warnings in sandbox where pointers are typically 64 bits long.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |   30 ++++++++++++++++++------------
 1 files changed, 18 insertions(+), 12 deletions(-)
#21 lore raw

PATCH 11/20 Update set_working_fdt_addr() to use setenv_addr()

In reply to Simon Glass

We might as well use this common function instead of repeating the same code.

---
 common/cmd_fdt.c    |   11 ++---------
 common/cmd_nvedit.c |    8 ++++----
 include/common.h    |   14 +++++++++++++-
 3 files changed, 19 insertions(+), 14 deletions(-)
common/cmd_fdt.c +2 -9
index 9e2de34..0bdf7b6 100644
@@ -56,12 +56,8 @@ struct fdt_header *working_fdt;
 
 void set_working_fdt_addr(void *addr)
 {
-	char buf[17];
-
 	working_fdt = addr;
-
-	sprintf(buf, "%lx", (unsigned long)addr);
-	setenv("fdtaddr", buf);
+	setenv_addr("fdtaddr", addr);
 }
 
 /*
@@ -348,10 +344,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			}
 			if (subcmd[0] == 's') {
 				/* get the num nodes at this level */
-				char buf[11];
-
-				sprintf(buf, "%d", curIndex + 1);
-				setenv(var, buf);
+				setenv_ulong(var, curIndex + 1);
 			} else {
 				/* node index not found */
 				printf("libfdt node not found\n");
common/cmd_nvedit.c +4 -4
index 7633f0c..44e88aa 100644
@@ -295,17 +295,17 @@ int setenv_ulong(const char *varname, ulong value)
 }
 
 /**
- * Set an environment variable to an address in hex
+ * Set an environment variable to an value in hex
  *
  * @param varname	Environmet variable to set
- * @param addr		Value to set it to
+ * @param value		Value to set it to
  * @return 0 if ok, 1 on error
  */
-int setenv_addr(const char *varname, const void *addr)
+int setenv_hex(const char *varname, ulong value)
 {
 	char str[17];
 
-	sprintf(str, "%lx", (uintptr_t)addr);
+	sprintf(str, "%lx", value);
 	return setenv(varname, str);
 }
 
include/common.h +13 -1
index 08d01db..8ecaf56 100644
@@ -349,7 +349,19 @@ int getenv_yesno(const char *var);
 int	saveenv	     (void);
 int	setenv	     (const char *, const char *);
 int setenv_ulong(const char *varname, ulong value);
-int setenv_addr(const char *varname, const void *addr);
+int setenv_hex(const char *varname, ulong value);
+/**
+ * setenv_addr - Set an environment variable to an address in hex
+ *
+ * @varname:	Environmet variable to set
+ * @addr:	Value to set it to
+ * @return 0 if ok, 1 on error
+ */
+static inline int setenv_addr(const char *varname, const void *addr)
+{
+	return setenv_hex(varname, (ulong)addr);
+}
+
 #ifdef CONFIG_ARM
 # include <asm/mach-types.h>
 # include <asm/setup.h>
Signature · 1 line
1.7.7.3
#22 lore raw

PATCH 1/1 common/main: move set_working_fdt_addr to enable usage of $fdtaddr

When using $fdtaddr in $bootcmd and $bootcmd is automatically called, $fdtaddr is yet not defined.

---
 common/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
common/main.c +4 -4
index e2d2e09..77b9076 100644
@@ -378,6 +378,10 @@ void main_loop (void)
 
        bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
 
+#if defined CONFIG_OF_CONTROL
+       set_working_fdt_addr((void *)gd->fdt_blob);
+#endif /* CONFIG_OF_CONTROL */
+
 #ifdef CONFIG_BOOTCOUNT_LIMIT
        bootcount = bootcount_load();
        bootcount++;
@@ -500,10 +504,6 @@ void main_loop (void)
 #endif /* CONFIG_MENUKEY */
 #endif /* CONFIG_BOOTDELAY */
 
-#if defined CONFIG_OF_CONTROL
-       set_working_fdt_addr((void *)gd->fdt_blob);
-#endif /* CONFIG_OF_CONTROL */
-
        /*
         * Main Loop for Monitor Command Processing
         */
Signature · 1 line
1.7.11.3
author Applied
#23 lore raw

PATCH 11/20 Update set_working_fdt_addr() to use setenv_addr()

In reply to Simon Glass
Quoted 4 lines · Simon Glass

We might as well use this common function instead of repeating the same code.

Applied to x86/master.

Quoted 5 lines
---
 common/cmd_fdt.c    |   11 ++---------
 common/cmd_nvedit.c |    8 ++++----
 include/common.h    |   14 +++++++++++++-
 3 files changed, 19 insertions(+), 14 deletions(-)
#24 lore raw

PATCH 1/1 common/main: move set_working_fdt_addr to enable usage of $fdtaddr

In reply to Simon Glass

When using $fdtaddr in $bootcmd and $bootcmd is automatically called, $fdtaddr is yet not defined.

---
 common/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
common/main.c +4 -4
index e2d2e09..77b9076 100644
@@ -378,6 +378,10 @@ void main_loop (void)
 
        bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
 
+#if defined CONFIG_OF_CONTROL
+       set_working_fdt_addr((void *)gd->fdt_blob);
+#endif /* CONFIG_OF_CONTROL */
+
 #ifdef CONFIG_BOOTCOUNT_LIMIT
        bootcount = bootcount_load();
        bootcount++;
@@ -500,10 +504,6 @@ void main_loop (void)
 #endif /* CONFIG_MENUKEY */
 #endif /* CONFIG_BOOTDELAY */
 
-#if defined CONFIG_OF_CONTROL
-       set_working_fdt_addr((void *)gd->fdt_blob);
-#endif /* CONFIG_OF_CONTROL */
-
        /*
         * Main Loop for Monitor Command Processing
         */
Signature · 1 line
1.7.11.3
#25 lore raw

PATCH 1/1 common/main: move set_working_fdt_addr to enable usage of $fdtaddr

In reply to Simon Glass

When using $fdtaddr in $bootcmd and $bootcmd is automatically called, $fdtaddr is yet not defined.

---
 common/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
common/main.c +4 -4
index e2d2e09..77b9076 100644
@@ -378,6 +378,10 @@ void main_loop (void)
 
        bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
 
+#if defined CONFIG_OF_CONTROL
+       set_working_fdt_addr((void *)gd->fdt_blob);
+#endif /* CONFIG_OF_CONTROL */
+
 #ifdef CONFIG_BOOTCOUNT_LIMIT
        bootcount = bootcount_load();
        bootcount++;
@@ -500,10 +504,6 @@ void main_loop (void)
 #endif /* CONFIG_MENUKEY */
 #endif /* CONFIG_BOOTDELAY */
 
-#if defined CONFIG_OF_CONTROL
-       set_working_fdt_addr((void *)gd->fdt_blob);
-#endif /* CONFIG_OF_CONTROL */
-
        /*
         * Main Loop for Monitor Command Processing
         */
Signature · 1 line
1.7.11.3
#26 lore raw

PATCH 12/20 common: Use new numeric setenv functions

In reply to Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

---
 common/cmd_bootm.c    |   11 +++--------
 common/cmd_cbfs.c     |    4 +---
 common/cmd_cramfs.c   |    4 +---
 common/cmd_fdos.c     |    4 +---
 common/cmd_jffs2.c    |    4 +---
 common/cmd_load.c     |   12 +++---------
 common/cmd_mtdparts.c |    4 +---
 common/cmd_nand.c     |   12 +++---------
 common/cmd_nvedit.c   |    3 +--
 common/cmd_reiser.c   |    4 +---
 common/cmd_setexpr.c  |   39 +++++++++++++++++++++++++++------------
 common/cmd_unzip.c    |    4 +---
 common/cmd_ximg.c     |    7 ++-----
 common/cmd_zfs.c      |    3 +--
 common/cmd_zip.c      |    4 +---
 15 files changed, 48 insertions(+), 71 deletions(-)
common/cmd_bootm.c +3 -8
index f7595c0..2debfe3 100644
@@ -447,9 +447,7 @@ static int bootm_start_standalone(ulong iflag, int argc, char * const argv[])
 
 	/* Don't start if "autostart" is set to "no" */
 	if (((s = getenv("autostart")) != NULL) && (strcmp(s, "no") == 0)) {
-		char buf[32];
-		sprintf(buf, "%lX", images.os.image_len);
-		setenv("filesize", buf);
+		setenv_hex("filesize", images.os.image_len);
 		return 0;
 	}
 	appl = (int (*)(int, char * const []))(ulong)ntohl(images.ep);
@@ -523,17 +521,14 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
 		case BOOTM_STATE_RAMDISK:
 		{
 			ulong rd_len = images.rd_end - images.rd_start;
-			char str[17];
 
 			ret = boot_ramdisk_high(&images.lmb, images.rd_start,
 				rd_len, &images.initrd_start, &images.initrd_end);
 			if (ret)
 				return ret;
 
-			sprintf(str, "%lx", images.initrd_start);
-			setenv("initrd_start", str);
-			sprintf(str, "%lx", images.initrd_end);
-			setenv("initrd_end", str);
+			setenv_hex("initrd_start", images.initrd_start);
+			setenv_hex("initrd_end", images.initrd_end);
 		}
 			break;
 #endif
common/cmd_cbfs.c +1 -3
index 3b6cfd8..f51534b 100644
@@ -65,7 +65,6 @@ int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 	const struct cbfs_cachenode *file;
 	unsigned long offset;
 	unsigned long count;
-	char buf[12];
 	long size;
 
 	if (argc < 3) {
@@ -95,8 +94,7 @@ int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 
 	printf("\n%ld bytes read\n", size);
 
-	sprintf(buf, "%lX", size);
-	setenv("filesize", buf);
+	setenv_hex("filesize", size);
 
 	return 0;
 }
common/cmd_cramfs.c +1 -3
index e7f496e..0e43ab6 100644
@@ -146,11 +146,9 @@ int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		size = cramfs_load ((char *) offset, &part, filename);
 
 	if (size > 0) {
-		char buf[10];
 		printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n",
 			size, offset);
-		sprintf(buf, "%x", size);
-		setenv("filesize", buf);
+		setenv_hex("filesize", size);
 	} else {
 		printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename);
 	}
common/cmd_fdos.c +1 -3
index fbee861..5a35cc1 100644
@@ -40,7 +40,6 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
     char *name;
     char *ep;
     int size;
-    char buf [12];
     int drive = CONFIG_SYS_FDC_DRIVE_NUMBER;
 
     /* pre-set load_addr */
@@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
     }
     flush_cache (load_addr, size);
 
-    sprintf(buf, "%x", size);
-    setenv("filesize", buf);
+	setenv_hex("filesize", size);
 
     printf("Floppy DOS load complete: %d bytes loaded to 0x%lx\n",
 	   size, load_addr);
common/cmd_jffs2.c +1 -3
index 27296dd..4a4a000 100644
@@ -525,11 +525,9 @@ int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		}
 
 		if (size > 0) {
-			char buf[10];
 			printf("### %s load complete: %d bytes loaded to 0x%lx\n",
 				fsname, size, offset);
-			sprintf(buf, "%x", size);
-			setenv("filesize", buf);
+			setenv_hex("filesize", size);
 		} else {
 			printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename);
 		}
common/cmd_load.c +3 -9
index 2c8dab1..e56b983 100644
@@ -149,7 +149,6 @@ static ulong load_serial(long offset)
 	int	type;				/* return code for record type	*/
 	ulong	addr;				/* load address from S-Record	*/
 	ulong	size;				/* number of bytes transferred	*/
-	char	buf[32];
 	ulong	store_addr;
 	ulong	start_addr = ~0;
 	ulong	end_addr   =  0;
@@ -198,8 +197,7 @@ static ulong load_serial(long offset)
 			    start_addr, end_addr, size, size
 		    );
 		    flush_cache(start_addr, size);
-		    sprintf(buf, "%lX", size);
-		    setenv("filesize", buf);
+		    setenv_hex("filesize", size);
 		    return (addr);
 		case SREC_START:
 		    break;
@@ -519,7 +517,6 @@ static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc,
 static ulong load_serial_bin(ulong offset)
 {
 	int size, i;
-	char buf[32];
 
 	set_kerm_bin_mode((ulong *) offset);
 	size = k_recv();
@@ -539,8 +536,7 @@ static ulong load_serial_bin(ulong offset)
 	flush_cache(offset, size);
 
 	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
-	sprintf(buf, "%X", size);
-	setenv("filesize", buf);
+	setenv_hex("filesize", size);
 
 	return offset;
 }
@@ -965,7 +961,6 @@ static int getcxmodem(void) {
 static ulong load_serial_ymodem(ulong offset)
 {
 	int size;
-	char buf[32];
 	int err;
 	int res;
 	connection_info_t info;
@@ -1012,8 +1007,7 @@ static ulong load_serial_ymodem(ulong offset)
 	flush_cache(offset, size);
 
 	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
-	sprintf(buf, "%X", size);
-	setenv("filesize", buf);
+	setenv_hex("filesize", size);
 
 	return offset;
 }
common/cmd_mtdparts.c +1 -3
index 06fc171..0cfca0c 100644
@@ -230,7 +230,6 @@ static void memsize_format(char *buf, u32 size)
  */
 static void index_partitions(void)
 {
-	char buf[16];
 	u16 mtddevnum;
 	struct part_info *part;
 	struct list_head *dentry;
@@ -244,8 +243,7 @@ static void index_partitions(void)
 			dev = list_entry(dentry, struct mtd_device, link);
 			if (dev == current_mtd_dev) {
 				mtddevnum += current_mtd_partnum;
-				sprintf(buf, "%d", mtddevnum);
-				setenv("mtddevnum", buf);
+				setenv_ulong("mtddevnum", mtddevnum);
 				break;
 			}
 			mtddevnum += dev->num_parts;
common/cmd_nand.c +3 -9
index 1568594..6ebd333 100644
@@ -373,7 +373,6 @@ static void nand_print_and_set_info(int idx)
 {
 	nand_info_t *nand = &nand_info[idx];
 	struct nand_chip *chip = nand->priv;
-	char buf[32];
 
 	printf("Device %d: ", idx);
 	if (chip->numchips > 1)
@@ -385,14 +384,9 @@ static void nand_print_and_set_info(int idx)
 	printf("  Erase size %8d b\n", nand->erasesize);
 
 	/* Set geometry info */
-	sprintf(buf, "%x", nand->writesize);
-	setenv("nand_writesize", buf);
-
-	sprintf(buf, "%x", nand->oobsize);
-	setenv("nand_oobsize", buf);
-
-	sprintf(buf, "%x", nand->erasesize);
-	setenv("nand_erasesize", buf);
+	setenv_hex("nand_writesize", nand->writesize);
+	setenv_hex("nand_oobsize", nand->oobsize);
+	setenv_hex("nand_erasesize", nand->erasesize);
 }
 
 static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count,
common/cmd_nvedit.c +1 -2
index 44e88aa..d646d90 100644
@@ -891,8 +891,7 @@ NXTARG:		;
 		envp->flags = ACTIVE_FLAG;
 #endif
 	}
-	sprintf(buf, "%zX", (size_t)(len + offsetof(env_t, data)));
-	setenv("filesize", buf);
+	setenv_hex("filesize", len + offsetof(env_t, data));
 
 	return 0;
 
common/cmd_reiser.c +1 -3
index e658618..717c7f6 100644
@@ -100,7 +100,6 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	ulong addr = 0, filelen;
 	disk_partition_t info;
 	block_dev_desc_t *dev_desc = NULL;
-	char buf [12];
 	unsigned long count;
 	char *addr_str;
 
@@ -175,8 +174,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	load_addr = addr;
 
 	printf ("\n%ld bytes read\n", filelen);
-	sprintf(buf, "%lX", filelen);
-	setenv("filesize", buf);
+	setenv_hex("filesize", filelen);
 
 	return filelen;
 }
common/cmd_setexpr.c +27 -12
index 5a04295..7a38e94 100644
@@ -53,7 +53,7 @@ static ulong get_arg(char *s, int w)
 static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong a, b;
-	char buf[16];
+	ulong value;
 	int w;
 
 	/* Validate arguments */
@@ -67,8 +67,7 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	a = get_arg(argv[2], w);
 
 	if (argc == 3) {
-		sprintf(buf, "%lx", a);
-		setenv(argv[1], buf);
+		setenv_hex(argv[1], a);
 
 		return 0;
 	}
@@ -76,20 +75,36 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	b = get_arg(argv[4], w);
 
 	switch (argv[3][0]) {
-	case '|': sprintf(buf, "%lx", (a | b)); break;
-	case '&': sprintf(buf, "%lx", (a & b)); break;
-	case '+': sprintf(buf, "%lx", (a + b)); break;
-	case '^': sprintf(buf, "%lx", (a ^ b)); break;
-	case '-': sprintf(buf, "%lx", (a - b)); break;
-	case '*': sprintf(buf, "%lx", (a * b)); break;
-	case '/': sprintf(buf, "%lx", (a / b)); break;
-	case '%': sprintf(buf, "%lx", (a % b)); break;
+	case '|':
+		value = a | b;
+		break;
+	case '&':
+		value = a & b;
+		break;
+	case '+':
+		value = a + b;
+		break;
+	case '^':
+		value = a ^ b;
+		break;
+	case '-':
+		value = a - b;
+		break;
+	case '*':
+		value = a * b;
+		break;
+	case '/':
+		value = a / b;
+		break;
+	case '%':
+		value = a % b;
+		break;
 	default:
 		printf("invalid op\n");
 		return 1;
 	}
 
-	setenv(argv[1], buf);
+	setenv_hex(argv[1], value);
 
 	return 0;
 }
common/cmd_unzip.c +1 -3
index 43ed791..7470c2b 100644
@@ -28,7 +28,6 @@ static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	unsigned long src, dst;
 	unsigned long src_len = ~0UL, dst_len = ~0UL;
-	char buf[32];
 
 	switch (argc) {
 		case 4:
@@ -46,8 +45,7 @@ static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 1;
 
 	printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len);
-	sprintf(buf, "%lX", src_len);
-	setenv("filesize", buf);
+	setenv_hex("filesize", src_len);
 
 	return 0;
 }
common/cmd_ximg.c +2 -5
index 42a7eba..ea0a26e 100644
@@ -50,7 +50,6 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	ulong		data, len, count;
 	int		verify;
 	int		part = 0;
-	char		pbuf[10];
 	image_header_t	*hdr;
 #if defined(CONFIG_FIT)
 	const char	*uname = NULL;
@@ -256,10 +255,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		puts("OK\n");
 	}
 
-	sprintf(pbuf, "%8lx", data);
-	setenv("fileaddr", pbuf);
-	sprintf(pbuf, "%8lx", len);
-	setenv("filesize", pbuf);
+	setenv_hex("fileaddr", data);
+	setenv_hex("filesize", len);
 
 	return 0;
 }
common/cmd_zfs.c +1 -2
index 1df0c4d..900e977 100644
@@ -129,8 +129,7 @@ static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 	load_addr = addr;
 
 	printf("%llu bytes read\n", zfile.size);
-	sprintf(buf, "%llX", zfile.size);
-	setenv("filesize", buf);
+	setenv_hex("filesize", zfile.size);
 
 	return 0;
 }
common/cmd_zip.c +1 -3
index a73c86d..8607da8 100644
@@ -28,7 +28,6 @@ static int do_zip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	unsigned long src, dst;
 	unsigned long src_len, dst_len = ~0UL;
-	char buf[32];
 
 	switch (argc) {
 		case 5:
@@ -47,8 +46,7 @@ static int do_zip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 1;
 
 	printf("Compressed size: %ld = 0x%lX\n", dst_len, dst_len);
-	sprintf(buf, "%lX", dst_len);
-	setenv("filesize", buf);
+	setenv_hex("filesize", dst_len);
 
 	return 0;
 }
Signature · 1 line
1.7.7.3
author Applied
#27 lore raw

PATCH 12/20 common: Use new numeric setenv functions

Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

Applied to x86/master.

Quoted 18 lines
---
 common/cmd_bootm.c    |   11 +++--------
 common/cmd_cbfs.c     |    4 +---
 common/cmd_cramfs.c   |    4 +---
 common/cmd_fdos.c     |    4 +---
 common/cmd_jffs2.c    |    4 +---
 common/cmd_load.c     |   12 +++---------
 common/cmd_mtdparts.c |    4 +---
 common/cmd_nand.c     |   12 +++---------
 common/cmd_nvedit.c   |    3 +--
 common/cmd_reiser.c   |    4 +---
 common/cmd_setexpr.c  |   39 +++++++++++++++++++++++++++------------
 common/cmd_unzip.c    |    4 +---
 common/cmd_ximg.c     |    7 ++-----
 common/cmd_zfs.c      |    3 +--
 common/cmd_zip.c      |    4 +---
 15 files changed, 48 insertions(+), 71 deletions(-)
#28 lore raw

PATCH 12/20 common: Use new numeric setenv functions

In reply to Simon Glass
Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

[snip]

Quoted 4 lines
common/cmd_fdos.c +0 -0
index fbee861..5a35cc1 100644

[snip]

common/cmd_fdos.c int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) · line 93

Quoted 7 lines
common/cmd_fdos.c +1 -2
@@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
     }
     flush_cache (load_addr, size);
 
-    sprintf(buf, "%x", size);
-    setenv("filesize", buf);
+	setenv_hex("filesize", size);

Tab and space mixing in the function. I'll fix if git am --whitespace=fix doesn't spot and fix.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130218/86686eae/attachment.pgp>
#29 lore raw

PATCH 12/20 common: Use new numeric setenv functions

Hi Tom,

Quoted 15 lines · Tom Rini
Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

[snip]

Quoted 4 lines
common/cmd_fdos.c +0 -0
index fbee861..5a35cc1 100644

[snip]

Quoted 4 lines
common/cmd_fdos.c +0 -0
@@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
     }
     flush_cache (load_addr, size);
 
Quoted 6 lines

common/cmd_fdos.c int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) · line 93

Quoted 3 lines
common/cmd_fdos.c +1 -2
-    sprintf(buf, "%x", size);
-    setenv("filesize", buf);
+     setenv_hex("filesize", size);

Tab and space mixing in the function. I'll fix if git am --whitespace=fix doesn't spot and fix.

I'll change it back to spaces so that it is consistent, even if checkpatch is upset. There are now 5 patches changed so I will send out the whole series again.

Quoted 3 lines

--
Tom

Regards,
Simon

#30 lore raw

PATCH 12/20 common: Use new numeric setenv functions

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 23 lines · Simon Glass

Hi Tom,

Quoted 14 lines · Tom Rini
Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

[snip]

Quoted 3 lines
common/cmd_fdos.c index renamed from common/cmd_fdos.c +0 -0

fbee861..5a35cc1 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c

[snip]

Quoted 4 lines
common/cmd_fdos.c index renamed from common/cmd_fdos.c +0 -0
@@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, 
 int argc, char * const argv[]) } flush_cache (load_addr, 
 size);
 
Quoted 5 lines

common/cmd_fdos.c index int do_fdosboot(cmd_tbl_t *cmdtp, int flag, · line 93

Quoted 2 lines
common/cmd_fdos.c index renamed from common/cmd_fdos.c +0 -1
-    sprintf(buf, "%x", size); -    setenv("filesize", buf); + 
 setenv_hex("filesize", size);

Tab and space mixing in the function. I'll fix if git am --whitespace=fix doesn't spot and fix.

Quoted 3 lines

I'll change it back to spaces so that it is consistent, even if checkpatch is upset. There are now 5 patches changed so I will send out the whole series again.

Right, we should always be consistent with the file. From my read of the series, this was the only one where the file used spaces and the new insert was tabs, that's what I'm getting at. I guess the others didn't stick out as obviously?

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRKn3kAAoJENk4IS6UOR1WV5gP/Ro7jY8wwUV0O4UMYuFidIVG 9SsElNnJoFaoO+qske9MAR6YknpJNb0hu10ZSZWoA+Db1gGeHMwAydG/F8eYJOad IE26MJVzzSbjmsQx7UJcRKNPfDLKWcZDUMtDC+2YAjT8PvUDRkOqHKqLc/WxcawM ytsw7o+6lf7GWYABjjEdJkRqd4kd+lq+l6sQoBk0qqQkergjP4+Si3BN3h77ZupV 8hTA7idf3/6ezKjHB3jyMl5kSFrgEPPdhrRNlaYAFriYKpDIwINHEWAYXgQpAtWW YSA0CQBKZMVE9liMWy3ZWDFslcfk0i72H3m2IP1kNsyRRx0wuekkUlVONc9AQoVe x3aSnw3LDt0b3SaGhoMLwVKoL6ZI6IKUfAvJNh/tmc/vNbrDmrot2z8mPd4ccKp4 AfrhlpH4KE8eU6zsVpsVWJ85LHaIBu/5SvW73UFLCDZwwnUUIKCj4A903cweCuoG i8VrY11OliR/yABz+NRRek7Y8pyBMqq40ES4lZJYrcKXwi0k3OwAraCrA73IZeg3 d50ME2WTBQ+tR0cFfp8BZxTVYxrTpHA2diOHL7rdFRfAlii3Wt6Ee9Zbb+ozir6q TKfxVqJYmHpTYiEt6CuYpq6GD+wQnWbAYkZw5DbmEeq65UUid/UUPcLhDhEinmg6 wbo0UcLD2TLRqc9IS9fX
=lxH4
-----END PGP SIGNATURE-----

#31 lore raw

PATCH 12/20 common: Use new numeric setenv functions

Hi Tom,

Quoted 27 lines · Tom Rini

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 23 lines · Simon Glass

Hi Tom,

Quoted 19 lines · Tom Rini
Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in common/

[snip]

Quoted 3 lines
common/cmd_fdos.c index renamed from common/cmd_fdos.c +0 -0

fbee861..5a35cc1 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c

[snip]

common/cmd_fdos.c index int do_fdosboot(cmd_tbl_t *cmdtp, int flag, · line 93

Quoted 6 lines
common/cmd_fdos.c index renamed from common/cmd_fdos.c +0 -1
@@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag,
 int argc, char * const argv[]) } flush_cache (load_addr,
 size);
 
-    sprintf(buf, "%x", size); -    setenv("filesize", buf); +
 setenv_hex("filesize", size);

Tab and space mixing in the function. I'll fix if git am --whitespace=fix doesn't spot and fix.

Quoted 8 lines
Quoted 3 lines

I'll change it back to spaces so that it is consistent, even if checkpatch is upset. There are now 5 patches changed so I will send out the whole series again.

Right, we should always be consistent with the file. From my read of the series, this was the only one where the file used spaces and the new insert was tabs, that's what I'm getting at. I guess the others didn't stick out as obviously?

Well I didn't see any other similar problem. There are a few warnings
- in one case I am moving code and then fixing it up in a later commit. But I think this is the only one where I am deliberating following the prevailing style to fit in with the surrounding code.

Regards,
Simon

Quoted 21 lines

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRKn3kAAoJENk4IS6UOR1WV5gP/Ro7jY8wwUV0O4UMYuFidIVG 9SsElNnJoFaoO+qske9MAR6YknpJNb0hu10ZSZWoA+Db1gGeHMwAydG/F8eYJOad IE26MJVzzSbjmsQx7UJcRKNPfDLKWcZDUMtDC+2YAjT8PvUDRkOqHKqLc/WxcawM ytsw7o+6lf7GWYABjjEdJkRqd4kd+lq+l6sQoBk0qqQkergjP4+Si3BN3h77ZupV 8hTA7idf3/6ezKjHB3jyMl5kSFrgEPPdhrRNlaYAFriYKpDIwINHEWAYXgQpAtWW YSA0CQBKZMVE9liMWy3ZWDFslcfk0i72H3m2IP1kNsyRRx0wuekkUlVONc9AQoVe x3aSnw3LDt0b3SaGhoMLwVKoL6ZI6IKUfAvJNh/tmc/vNbrDmrot2z8mPd4ccKp4 AfrhlpH4KE8eU6zsVpsVWJ85LHaIBu/5SvW73UFLCDZwwnUUIKCj4A903cweCuoG i8VrY11OliR/yABz+NRRek7Y8pyBMqq40ES4lZJYrcKXwi0k3OwAraCrA73IZeg3 d50ME2WTBQ+tR0cFfp8BZxTVYxrTpHA2diOHL7rdFRfAlii3Wt6Ee9Zbb+ozir6q TKfxVqJYmHpTYiEt6CuYpq6GD+wQnWbAYkZw5DbmEeq65UUid/UUPcLhDhEinmg6 wbo0UcLD2TLRqc9IS9fX
=lxH4
-----END PGP SIGNATURE-----

#32 lore raw

PATCH 13/20 drivers: Use new numeric setenv functions

In reply to Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in drivers/

---
 fs/fs.c          |    4 +---
 fs/ubifs/ubifs.c |    4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)
fs/fs.c +1 -3
index 023e7ef..2c9f2c5 100644
@@ -256,7 +256,6 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 	unsigned long bytes;
 	unsigned long pos;
 	int len_read;
-	char buf[12];
 	unsigned long time;
 
 	if (argc < 2)
@@ -308,8 +307,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 	}
 	puts("\n");
 
-	sprintf(buf, "0x%x", len_read);
-	setenv("filesize", buf);
+	setenv_hex("filesize", len_read);
 
 	return 0;
 }
fs/ubifs/ubifs.c +1 -3
index 44be3f5..273c0a9 100644
@@ -687,7 +687,6 @@ int ubifs_load(char *filename, u32 addr, u32 size)
 	int i;
 	int count;
 	int last_block_size = 0;
-	char buf [10];
 
 	c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
 	/* ubifs_findfile will resolve symlinks, so we know that we get
@@ -740,8 +739,7 @@ int ubifs_load(char *filename, u32 addr, u32 size)
 	if (err)
 		printf("Error reading file '%s'\n", filename);
 	else {
-	        sprintf(buf, "%X", size);
-		setenv("filesize", buf);
+		setenv_hex("filesize", size);
 		printf("Done\n");
 	}
 
Signature · 1 line
1.7.7.3
author Applied
#33 lore raw

PATCH 13/20 drivers: Use new numeric setenv functions

Quoted 3 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in drivers/

Applied to x86/master.

Quoted 4 lines
---
 fs/fs.c          |    4 +---
 fs/ubifs/ubifs.c |    4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)
#34 lore raw

PATCH 13/20 drivers: Use new numeric setenv functions

In reply to Simon Glass
Quoted 6 lines · Simon Glass

Use setenv_ulong(), setenv_hex() and setenv_addr() in drivers/

---
 fs/fs.c          |    4 +---
 fs/ubifs/ubifs.c |    4 +---

fs/ not drivers/

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130218/034e9f56/attachment.pgp>
#35 lore raw

PATCH 14/20 net: Use new numeric setenv functions

In reply to Simon Glass

Use setenv_hex() and setenv_addr() in net/

---
 drivers/net/fm/fm.c |    4 +---
 net/net.c           |    8 ++------
 2 files changed, 3 insertions(+), 9 deletions(-)
drivers/net/fm/fm.c +1 -3
index 49c74c2..8d70586 100644
@@ -362,7 +362,6 @@ static void fm_init_qmi(struct fm_qmi_common *qmi)
 int fm_init_common(int index, struct ccsr_fman *reg)
 {
 	int rc;
-	char env_addr[32];
 #if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR)
 	void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR;
 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND)
@@ -416,8 +415,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 	rc = fman_upload_firmware(index, &reg->fm_imem, addr);
 	if (rc)
 		return rc;
-	sprintf(env_addr, "0x%lx", (long unsigned int)addr);
-	setenv("fman_ucode", env_addr);
+	setenv_addr("fman_ucode", addr);
 
 	fm_init_muram(index, &reg->muram);
 	fm_init_qmi(&reg->fm_qmi_common);
net/net.c +2 -6
index a40cde1..df94789 100644
@@ -528,15 +528,11 @@ restart:
 		case NETLOOP_SUCCESS:
 			net_cleanup_loop();
 			if (NetBootFileXferSize > 0) {
-				char buf[20];
 				printf("Bytes transferred = %ld (%lx hex)\n",
 					NetBootFileXferSize,
 					NetBootFileXferSize);
-				sprintf(buf, "%lX", NetBootFileXferSize);
-				setenv("filesize", buf);
-
-				sprintf(buf, "%lX", (unsigned long)load_addr);
-				setenv("fileaddr", buf);
+				setenv_hex("filesize", NetBootFileXferSize);
+				setenv_hex("fileaddr", load_addr);
 			}
 			if (protocol != NETCONS)
 				eth_halt();
Signature · 1 line
1.7.7.3
author Applied
#36 lore raw

PATCH 14/20 net: Use new numeric setenv functions

Quoted 3 lines · Simon Glass

Use setenv_hex() and setenv_addr() in net/

Applied to x86/master.

Quoted 4 lines
---
 drivers/net/fm/fm.c |    4 +---
 net/net.c           |    8 ++------
 2 files changed, 3 insertions(+), 9 deletions(-)
#37 lore raw

PATCH 15/20 image: Use crc header file instead of C prototypes

In reply to Simon Glass

We have an existing header which the crc32 definitions, so use it.

---
 common/image.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
common/image.c +2 -2
index 95498e6..936b08c 100644
@@ -75,6 +75,8 @@ static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
 #include <image.h>
 #endif /* !USE_HOSTCC*/
 
+#include <u-boot/crc.h>
+
 static const table_entry_t uimage_arch[] = {
 	{	IH_ARCH_INVALID,	NULL,		"Invalid ARCH",	},
 	{	IH_ARCH_ALPHA,		"alpha",	"Alpha",	},
@@ -161,8 +163,6 @@ static const table_entry_t uimage_comp[] = {
 	{	-1,		"",		"",			},
 };
 
-uint32_t crc32(uint32_t, const unsigned char *, uint);
-uint32_t crc32_wd(uint32_t, const unsigned char *, uint, uint);
 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
 static void genimg_print_time(time_t timestamp);
 #endif
Signature · 1 line
1.7.7.3
#40 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

In reply to Simon Glass

Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value.

---
 common/cmd_mem.c     |   73 ++++---------------------------------------------
 common/hash.c        |    6 ++++
 include/hash.h       |    2 +-
 include/u-boot/crc.h |   11 +++++++
 lib/crc32.c          |    9 ++++++
 5 files changed, 33 insertions(+), 68 deletions(-)
common/cmd_mem.c +6 -67
index c45a31e..701157d 100644
@@ -32,6 +32,7 @@
 #ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>
 #endif
+#include <hash.h>
 #include <watchdog.h>
 #include <asm/io.h>
 
@@ -1093,89 +1094,27 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
 
 #ifdef CONFIG_CMD_CRC32
 
-#ifndef CONFIG_CRC32_VERIFY
-
 static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong addr, length;
-	ulong crc;
-	ulong *ptr;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	addr = simple_strtoul (argv[1], NULL, 16);
-	addr += base_address;
-
-	length = simple_strtoul (argv[2], NULL, 16);
-
-	crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
-
-	printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
-			addr, addr + length - 1, crc);
-
-	if (argc > 3) {
-		ptr = (ulong *) simple_strtoul (argv[3], NULL, 16);
-		*ptr = crc;
-	}
-
-	return 0;
-}
-
-#else	/* CONFIG_CRC32_VERIFY */
-
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong addr, length;
-	ulong crc;
-	ulong *ptr;
-	ulong vcrc;
-	int verify;
+	int verify = 0;
 	int ac;
 	char * const *av;
 
-	if (argc < 3) {
-usage:
+	if (argc < 3)
 		return CMD_RET_USAGE;
-	}
 
 	av = argv + 1;
 	ac = argc - 1;
+#ifdef CONFIG_HASH_VERIFY
 	if (strcmp(*av, "-v") == 0) {
 		verify = 1;
 		av++;
 		ac--;
-		if (ac < 3)
-			goto usage;
-	} else
-		verify = 0;
-
-	addr = simple_strtoul(*av++, NULL, 16);
-	addr += base_address;
-	length = simple_strtoul(*av++, NULL, 16);
-
-	crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
-
-	if (!verify) {
-		printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
-				addr, addr + length - 1, crc);
-		if (ac > 2) {
-			ptr = (ulong *) simple_strtoul (*av++, NULL, 16);
-			*ptr = crc;
-		}
-	} else {
-		vcrc = simple_strtoul(*av++, NULL, 16);
-		if (vcrc != crc) {
-			printf ("CRC32 for %08lx ... %08lx ==> %08lx != %08lx ** ERROR **\n",
-					addr, addr + length - 1, crc, vcrc);
-			return 1;
-		}
 	}
+#endif
 
-	return 0;
-
+	return hash_command("crc32", verify, cmdtp, flag, ac, av);
 }
-#endif	/* CONFIG_CRC32_VERIFY */
 
 #endif
 
common/hash.c +6 -0
index e3a6e43..e92b4b1 100644
@@ -50,6 +50,12 @@ static struct hash_algo hash_algo[] = {
 		CHUNKSZ_SHA256,
 	},
 #endif
+	{
+		"CRC32",
+		4,
+		crc32_wd_buf,
+		CHUNKSZ_CRC32,
+	},
 };
 
 /**
include/hash.h +1 -1
index 34ba558..ba2ba65 100644
@@ -22,7 +22,7 @@
 #ifndef _HASH_H
 #define _HASH_H
 
-#ifdef CONFIG_SHA1SUM_VERIFY
+#if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY)
 #define CONFIG_HASH_VERIFY
 #endif
 
include/u-boot/crc.h +11 -0
index 07badbf..08e509e 100644
@@ -30,4 +30,15 @@ uint32_t crc32 (uint32_t, const unsigned char *, uint);
 uint32_t crc32_wd (uint32_t, const unsigned char *, uint, uint);
 uint32_t crc32_no_comp (uint32_t, const unsigned char *, uint);
 
+/**
+ * crc32_wd_buf - Perform CRC32 on a buffer and return result in buffer
+ *
+ * @input:	Input buffer
+ * @ilen:	Input buffer length
+ * @output:	Place to put checksum result (4 bytes)
+ * @chunk_sz:	Trigger watchdog after processing this many bytes
+ */
+void crc32_wd_buf(const unsigned char *input, uint ilen,
+		    unsigned char *output, uint chunk_sz);
+
 #endif /* _UBOOT_CRC_H */
lib/crc32.c +9 -0
index 27335a3..76205da 100644
@@ -249,3 +249,12 @@ uint32_t ZEXPORT crc32_wd (uint32_t crc,
 
 	return crc;
 }
+
+void crc32_wd_buf(const unsigned char *input, unsigned int ilen,
+		unsigned char *output, unsigned int chunk_sz)
+{
+	uint32_t crc;
+
+	crc = crc32_wd(0, input, ilen, chunk_sz);
+	memcpy(output, &crc, sizeof(crc));
+}
Signature · 1 line
1.7.7.3
author Applied
#41 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Quoted 6 lines · Simon Glass

Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value.

Applied to x86/master.

Quoted 8 lines
---
 common/cmd_mem.c     |   73 ++++---------------------------------------------
 common/hash.c        |    6 ++++
 include/hash.h       |    2 +-
 include/u-boot/crc.h |   11 +++++++
 lib/crc32.c          |    9 ++++++
 5 files changed, 33 insertions(+), 68 deletions(-)
#42 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Dear Simon Glass,

Quoted 17 lines · In message <CAPnjgZ0hKP-Lr9TiUXCQEa-JhOGEB_6JXuBsCJq-FtAYhDJnww@mail.gmail.com>…
Quoted 6 lines · Simon Glass

Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value.

Applied to x86/master.

Quoted 7 lines
---
 common/cmd_mem.c     |   73 ++++---------------------------------------------
 common/hash.c        |    6 ++++
 include/hash.h       |    2 +-
 include/u-boot/crc.h |   11 +++++++
 lib/crc32.c          |    9 ++++++
 5 files changed, 33 insertions(+), 68 deletions(-)

Umm... this (and a lot of the other things) is all common stuff. This is not supposed to go through the x86 repository.

The x86 tree should ONLY be used for x86 spoecific stuff.

Please do no use this for pull requests. Tom has to pick up these directly.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Use C++ to confuse your enemies; use C to produce stable code.
#43 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Hi Wolfgang,

Quoted 21 lines · Wolfgang Denk

Dear Simon Glass,

Quoted 17 lines · In message <CAPnjgZ0hKP-Lr9TiUXCQEa-JhOGEB_6JXuBsCJq-FtAYhDJnww@mail.gmail.com>…
Quoted 6 lines · Simon Glass

Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value.

Applied to x86/master.

Quoted 7 lines
---
 common/cmd_mem.c     |   73 ++++---------------------------------------------
 common/hash.c        |    6 ++++
 include/hash.h       |    2 +-
 include/u-boot/crc.h |   11 +++++++
 lib/crc32.c          |    9 ++++++
 5 files changed, 33 insertions(+), 68 deletions(-)
Quoted 7 lines

Umm... this (and a lot of the other things) is all common stuff. This is not supposed to go through the x86 repository.

The x86 tree should ONLY be used for x86 spoecific stuff.

Please do no use this for pull requests. Tom has to pick up these directly.

OK, understood, have replied on your other thread and will await further instructions.

Regards,
Simon

Quoted 10 lines

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Use C++ to confuse your enemies; use C to produce stable code.

#44 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

In reply to Wolfgang Denk

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 22 lines · Wolfgang Denk

Dear Simon Glass,

In message <CAPnjgZ0hKP-Lr9TiUXCQEa-JhOGEB_6JXuBsCJq-FtAYhDJnww@mail.gmail.com>

Quoted 16 lines · you
Quoted 6 lines · Simon Glass

Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value.

Applied to x86/master.

Quoted 5 lines

--- common/cmd_mem.c | 73
++++--------------------------------------------- common/hash.c

|    6 ++++ include/hash.h       |    2 +- include/u-boot/crc.h
|   11 +++++++ lib/crc32.c          |    9 ++++++ 5 files

changed, 33 insertions(+), 68 deletions(-)

Quoted 7 lines

Umm... this (and a lot of the other things) is all common stuff. This is not supposed to go through the x86 repository.

The x86 tree should ONLY be used for x86 spoecific stuff.

Please do no use this for pull requests. Tom has to pick up these directly.

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRIWchAAoJENk4IS6UOR1WE+MQAKYZeaLDzgA7rLu6vJl2h4QU Ip3CI724hAjE2tr8WzIit3T9owLc1kI0xNnWtT8wi9YylP/EqIwgFs01ZfUUtm9Z TEaSTE+vnDMegTByD4Z3w7AoiF2Ebw9ZL0bTqeG8AZ8Nz4x1iwSWvUK2htYvd47F QoffFAI0UmHCdfYD9Bq+XcQ9CS7zjpS6uXNqroqSfiEzjFRtLMn8n0pUtqiPKgFi cX9pLi+ZwmNY7N+xNa7UzUbYsTml4V+J7HxhRyjzHFHeCnFmE3WYP1+lmifxRZ+m +mZCEXSusUgiGGiLwh5vvfLNVGyYLxTAoA4cPFvqWWdwU51QMoz0GfoqiR4GS5Fn Z3Mrvkm380v4mHvB0m8PjtSfvm5/PUtTz7ZCXpUudCaB2Z8zKsZJy56hWaYQDr9I ZyHbR2bBOiGvdD9oOfvVj8CtXvC3VtJZ2GJpXDSlbsH6Ew9ONvjpfVqQEU7zT9Sz rBchE/iXxjgqi3iwXdll89McA4NJIO31uKa92ILDPXjE6joOHc5uyv1tlu1n+E5X m4+CwfHnqUgeaRBPGm4M8O5vVJeD5LLw7ulcKU91rXiE5DG/5dWzFatTffOn5e7A neuQoCZQd04Vi9FQp4eLhVatUzHZfkf6qV1pTwMQFR2pdlRigW3dYJH1gvyw3EQY DFGnIt0HBgonpJZBnzBh
=m6Rk
-----END PGP SIGNATURE-----

#45 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Actually, I see this change when pulling u-boot-x86.git/master:

-> bloat-o-meter u-boot-before u-boot
add/remove: 9/0 grow/shrink: 3/14 up/down: 1006/-560 (446)

function                                     old     new   delta
hash_command                                   -     424    +424
strncasecmp                                    -     156    +156
simple_itoa                                    -     104    +104
crc32_wd_buf                                   -      76     +76
setenv_hex                                     -      68     +68
setenv_ulong                                   -      52     +52
strcasecmp                                     -      36     +36
do_mem_loopw                                 304     328     +24
static.local                                   -      22     +22
do_mem_loop                                  268     288     +20
hash_algo                                      -      16     +16
do_mem_cmp                                   332     340      +8
do_mem_mw                                    224     220      -4
set_working_fdt_addr                          72      52     -20
load_serial_ymodem                           300     280     -20
load_serial                                  512     492     -20
index_partitions                             200     180     -20
do_load_serial_bin                          1844    1824     -20
do_load                                      468     448     -20
do_jffs2_fsload                              320     300     -20
do_imgextract                                636     592     -44
NetLoop                                      832     788     -44
do_mem_cp                                    312     252     -60
do_bootm                                    1244    1180     -64

do_mem_crc 188 88 -100
do_mem_mtest 1436 1332 -104

So there are changes all over the place, including a growth of the memory footprint. I think this needs at least minimal review.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Time is an illusion perpetrated by the manufacturers of space.
#46 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Hi Wolfgang,

Quoted 10 lines · Wolfgang Denk

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

Quoted 4 lines

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Fair enough. I suspect a number of people scan the code, but few feel invested enough to formally Ack it. Also, providing a full review of such a series can take quite a bit of time. Against that, I think it is better to get code in and tested than have it sit around until just before the next release.

Quoted 2 lines

Actually, I see this change when pulling u-boot-x86.git/master:

Thanks for looking at it. Some of it is just the code moving around, but I will take a look at why hash_command grows so much, and why the overall size has grown. Clearly I didn't do enough here when I checked the series. One change was trying to unify the verify feature, so perhaps something has gone wrong there.

Quoted 28 lines

-> bloat-o-meter u-boot-before u-boot
add/remove: 9/0 grow/shrink: 3/14 up/down: 1006/-560 (446)

function                                     old     new   delta
hash_command                                   -     424    +424
strncasecmp                                    -     156    +156
simple_itoa                                    -     104    +104
crc32_wd_buf                                   -      76     +76
setenv_hex                                     -      68     +68
setenv_ulong                                   -      52     +52
strcasecmp                                     -      36     +36
do_mem_loopw                                 304     328     +24
static.local                                   -      22     +22
do_mem_loop                                  268     288     +20
hash_algo                                      -      16     +16
do_mem_cmp                                   332     340      +8
do_mem_mw                                    224     220      -4
set_working_fdt_addr                          72      52     -20
load_serial_ymodem                           300     280     -20
load_serial                                  512     492     -20
index_partitions                             200     180     -20
do_load_serial_bin                          1844    1824     -20
do_load                                      468     448     -20
do_jffs2_fsload                              320     300     -20
do_imgextract                                636     592     -44
NetLoop                                      832     788     -44
do_mem_cp                                    312     252     -60
do_bootm                                    1244    1180     -64
Quoted 6 lines

do_mem_crc 188 88 -100
do_mem_mtest 1436 1332 -104

So there are changes all over the place, including a growth of the memory footprint. I think this needs at least minimal review.

We need more reviewers I think.

Regards,
Simon

Quoted 10 lines

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Time is an illusion perpetrated by the manufacturers of space.

#47 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 24 lines · Simon Glass

Hi Wolfgang,

Quoted 11 lines · Wolfgang Denk

Dear Tom,

Quoted 7 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

Quoted 4 lines

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Fair enough. I suspect a number of people scan the code, but few feel invested enough to formally Ack it. Also, providing a full review of such a series can take quite a bit of time. Against that, I think it is better to get code in and tested than have it sit around until just before the next release.

[snip]

Quoted 5 lines
Quoted 3 lines

So there are changes all over the place, including a growth of the memory footprint. I think this needs at least minimal review.

We need more reviewers I think.

This is where I'm trying to find a good balance right now. If we just wait for reviewed-by lines to fly by, things will sit forever. Partly because enough folks don't feel like they "own" things enough to risk saying they reviewed something that turns out later to have a bug. And partly there's just not enough folks reading patches. I do try and give things some sort of read-over when it's the person posting who is doing the merging, especially for common rather than "their area" code.

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRIl9FAAoJENk4IS6UOR1WJqMP/ie04KKI6NpMPDei9QSJ9+qg peFMXyVXoNWVZ0OuVSgVYOyBNtTmZeUmNsyamtE/1QifAWX6F2lwXHl2teYcebMk 7Fn/N3uzoVisfcFhY3Ec0dgBigYbRm5hiSHF7qzBkS78FfI5XSFaR/XjkshCgLlC i5Vf8Gh6ilb67fLumzxnXU2LLpbfcoOoT7iMLX0C5SFkx9sjo4k/5/WC64jsx8IS NQiaoFX3Ow7uU63G7jEJ4hiqXsp2ulWZTBA4ynN7ydGYiPo+sRXoLRaBYB9yAkRQ 3Uj1a101VX+9LWdNoMRpqv6W3gq75+8nSggovK0DmxtF4X5PaF17Xmpc8dBTT9rE cCIkePKDNgg6QjTAtCxk7+nw997JSjrj1nV0R2+Jm225tby4hIjmnIfnCNgeYbbI II7+ecaUl4w+GxB1SgjFLmEyW0unDsYZauT4sXxSdBp/UOrs4I3XYW4gFofifMcB peJELQYVUHnXblZ+xR+8zY3URsn2vNRxNq5fUDWMUADgvwecfvWFeKaVGDA+aWHs vNFKWayZbt5MpqG4aQJ4mzIhf9avNytf8BSSQ+LFp53xOl5f08OsioN9+4H3rOND LRuiMZ5wtrlJea3Eoi3PFXeO/l4N4eKvDNbwNSwDbS4EZj+4mZbGrNxGglcQK3C+ 1EM1fpRioWEXpGaMpmKV
=W6Pn
-----END PGP SIGNATURE-----

#48 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

In reply to Wolfgang Denk

Hi Wolfgang,

Quoted 10 lines · Wolfgang Denk

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

Quoted 8 lines

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Actually, I see this change when pulling u-boot-x86.git/master:

-> bloat-o-meter u-boot-before u-boot

What board is this please?

Some specific notes here - I think it boils down to moving crc32 into the hash framework. This adds some overhead, but has a few benefits.

Quoted 3 lines

add/remove: 9/0 grow/shrink: 3/14 up/down: 1006/-560 (446)
function old new delta
hash_command - 424 +424

This is the generic hashing command. What is happening here is that the crc32 command is getting a few more features, more like sha1sum. However, this might not be desriable - and in fact this patch changes the behaviour of the CRC storage and verify to support using an environment variable, and requiring * before the argument when an address is required! That needs to be fixed, at least.

The intent is to try to unify the hashing/crc features into a single framework. If you enable only crc32 and nothing else then this has quite a cost (0.5KB at present). I think I can reduce this code by making the full features of hash.c only available when something more than just crc32 is enabled. However, it might involve some #ifdefs...

Quoted 39 lines
strncasecmp                                    -     156    +156
simple_itoa                                    -     104    +104
crc32_wd_buf                                   -      76     +76
setenv_hex                                     -      68     +68
setenv_ulong                                   -      52     +52
strcasecmp                                     -      36     +36
do_mem_loopw                                 304     328     +24
static.local                                   -      22     +22
do_mem_loop                                  268     288     +20
hash_algo                                      -      16     +16
do_mem_cmp                                   332     340      +8
do_mem_mw                                    224     220      -4
set_working_fdt_addr                          72      52     -20
load_serial_ymodem                           300     280     -20
load_serial                                  512     492     -20
index_partitions                             200     180     -20
do_load_serial_bin                          1844    1824     -20
do_load                                      468     448     -20
do_jffs2_fsload                              320     300     -20
do_imgextract                                636     592     -44
NetLoop                                      832     788     -44
do_mem_cp                                    312     252     -60
do_bootm                                    1244    1180     -64

do_mem_crc 188 88 -100
do_mem_mtest 1436 1332 -104

So there are changes all over the place, including a growth of the memory footprint. I think this needs at least minimal review.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Time is an illusion perpetrated by the manufacturers of space.

#49 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Quoted 18 lines · Simon Glass

Hi Wolfgang,

Quoted 15 lines · Wolfgang Denk

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Quoted 8 lines
Quoted 3 lines

Actually, I see this change when pulling u-boot-x86.git/master:

-> bloat-o-meter u-boot-before u-boot

What board is this please?

Some specific notes here - I think it boils down to moving crc32 into the hash framework. This adds some overhead, but has a few benefits.

So you're going to v2 this part?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130218/44c8150e/attachment.pgp>
#50 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

Hi Tom,

Quoted 21 lines · Tom Rini
Quoted 20 lines · Simon Glass

Hi Wolfgang,

Quoted 17 lines · Wolfgang Denk

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Actually, I see this change when pulling u-boot-x86.git/master:

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

-> bloat-o-meter u-boot-before u-boot

What board is this please?

Some specific notes here - I think it boils down to moving crc32 into the hash framework. This adds some overhead, but has a few benefits.

So you're going to v2 this part?

Yes, sorry for the hold-up, but I think this patch needs a few tweaks. I may even need to create a separate patch depending on how much I need to change common/hash.c. Hopefully it is just a case of adding some #ifdefs (!) and another parameter to select the behaviour required. I will make time for this tomorrow because then I am away until next week.

Quoted 3 lines

--
Tom

#51 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

In reply to Tom Rini

Hi Tom,

Quoted 21 lines · Tom Rini
Quoted 20 lines · Simon Glass

Hi Wolfgang,

Quoted 17 lines · Wolfgang Denk

Dear Tom,

Quoted 6 lines · In message <[email protected]> you wrote:

There's another thread I don't have yet (and I don't have this one in gmail yet even). But, I am OK with custodians using their repos, but not the master branch, for unrelated but otherwise good patches. I'm also fine with patchwork bundles. I suppose we could use the staging repository for these changes instead.

What I mostly object about there is that these patches would go into mainline basicly unreviewed, as patch submission and pull request is all done from a single person, with no other feedback on the patches at all. And this affects a lot of common code...

Actually, I see this change when pulling u-boot-x86.git/master:

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

-> bloat-o-meter u-boot-before u-boot

What board is this please?

Some specific notes here - I think it boils down to moving crc32 into the hash framework. This adds some overhead, but has a few benefits.

So you're going to v2 this part?

I have just sent 3 v2 patches to the mailing list. There is a new patch 16 to be inserted before this patch, an updated version of this patch, and an updated version of the final patch in the series (which was number 20 and is now number 21).

I have ended up just using #ifdef to remove most of the hash code if only crc32 is in use. It's not particularly elegant but I was not able to significantly reduce the code size impact any other way. Please take a look at it and see what you think.

Just in case it is useful, I have pushed a new 'us-mem3' branch to x86, but this is not for pulling (it has not been through patchwork), just for testing / comparison.

I will be away until Monday so probably no further response from me until then.

Regards,
Simon

Quoted 3 lines

--
Tom

#52 lore raw

PATCH 16/20 Roll crc32 into hash infrastructure

In reply to Simon Glass

Dear Simon,

Quoted 4 lines · In message <CAPnjgZ09okKf0qTnifKOrvg37nEnSNLFzyLBLp+4jt6U_L3RCg@mail.gmail.com>…
Quoted 2 lines

-> bloat-o-meter u-boot-before u-boot

What board is this please?

That was TQM5200S

Quoted 6 lines

This is the generic hashing command. What is happening here is that the crc32 command is getting a few more features, more like sha1sum. However, this might not be desriable - and in fact this patch changes the behaviour of the CRC storage and verify to support using an environment variable, and requiring * before the argument when an address is required! That needs to be fixed, at least.

Indeed - such a change of user interface must not be done here (though it does make a lot of sense to use common code for this stuff).

Quoted 1 line

The intent is to try to unify the hashing/crc features into a single

Understood and appreciayed.

Quoted 4 lines

framework. If you enable only crc32 and nothing else then this has quite a cost (0.5KB at present). I think I can reduce this code by making the full features of hash.c only available when something more than just crc32 is enabled. However, it might involve some #ifdefs...

Actually 0.5 k is quite heavy impact, so I guess the #ifdef's win...

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
But the only way of discovering the limits  of  the  possible  is  to
venture a little way past them into the impossible.
                         - _Profiles of the Future_ (1962; rev. 1973)
                  ``Hazards of Prophecy: The Failure of Imagination''
#53 lore raw

PATCH 17/20 sandbox: config: Enable hash functions and mtest

In reply to Simon Glass

Enable the hash command and sha1/256 hashing for sandbox. Also use a better address for memory testing (since the existing one is set up for linux host memory space).

---
 include/configs/sandbox.h |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)
include/configs/sandbox.h +7 -2
index 9c431bf..9f51a0b 100644
@@ -63,8 +63,8 @@
 #define CONFIG_SYS_HZ			1000
 
 /* Memory things - we don't really want a memory test */
-#define CONFIG_SYS_LOAD_ADDR		0x10000000
-#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_LOAD_ADDR		0x00000000
+#define CONFIG_SYS_MEMTEST_START	0x00100000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x1000)
 #define CONFIG_PHYS_64BIT
 
@@ -85,6 +85,11 @@
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
 #define CONFIG_BOOTARGS ""
 
 #define CONFIG_EXTRA_ENV_SETTINGS	"stdin=serial\0" \
Signature · 1 line
1.7.7.3
author Applied
#54 lore raw

PATCH 17/20 sandbox: config: Enable hash functions and mtest

Quoted 5 lines · Simon Glass

Enable the hash command and sha1/256 hashing for sandbox. Also use a better address for memory testing (since the existing one is set up for linux host memory space).

Applied to x86/master.

Quoted 3 lines
---
 include/configs/sandbox.h |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)
#55 lore raw

PATCH 18/20 Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file

In reply to Simon Glass

This config effectively has a default value of 0, so add this setting at the top of the code to remove an #ifdef in the C function.

---
 common/cmd_mem.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
common/cmd_mem.c +4 -4
index 701157d..f83acdf 100644
@@ -36,6 +36,10 @@
 #include <watchdog.h>
 #include <asm/io.h>
 
+#ifndef CONFIG_SYS_MEMTEST_SCRATCH
+#define CONFIG_SYS_MEMTEST_SCRATCH 0
+#endif
+
 static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
 
 /* Display values from last command.
@@ -636,11 +640,7 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	vu_long temp;
 	vu_long anti_pattern;
 	vu_long num_words;
-#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
 	vu_long *dummy = (vu_long *)CONFIG_SYS_MEMTEST_SCRATCH;
-#else
-	vu_long *dummy = NULL;	/* yes, this is address 0x0, not NULL */
-#endif
 	static const ulong bitpattern[] = {
 		0x00000001,	/* single bit */
 		0x00000003,	/* two adjacent bits */
Signature · 1 line
1.7.7.3
author Applied
#56 lore raw

PATCH 18/20 Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file

Quoted 4 lines · Simon Glass

This config effectively has a default value of 0, so add this setting at the top of the code to remove an #ifdef in the C function.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
#57 lore raw

PATCH 19/20 sandbox: Update mtest to fix crashes

In reply to Simon Glass

Use map_sysmem() in the memory tester so that it works as expected on sandbox.

---
 common/cmd_mem.c |   97 +++++++++++++++++++++++++++++-------------------------
 1 files changed, 52 insertions(+), 45 deletions(-)
common/cmd_mem.c +52 -45
index f83acdf..1bbe166 100644
@@ -626,21 +626,19 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 #endif /* CONFIG_LOOPW */
 
-static ulong mem_test_alt(ulong start_addr, ulong end_addr)
+static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr,
+			  vu_long *dummy)
 {
-	vu_long *start, *end;
 	vu_long *addr;
 	ulong errs = 0;
 	ulong val, readback;
 	int j;
-	vu_long len;
 	vu_long offset;
 	vu_long test_offset;
 	vu_long pattern;
 	vu_long temp;
 	vu_long anti_pattern;
 	vu_long num_words;
-	vu_long *dummy = (vu_long *)CONFIG_SYS_MEMTEST_SCRATCH;
 	static const ulong bitpattern[] = {
 		0x00000001,	/* single bit */
 		0x00000003,	/* two adjacent bits */
@@ -652,8 +650,7 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 		0xaaaaaaaa,	/* alternating 1/0 */
 	};
 
-	start = (vu_long *)start_addr;
-	end = (vu_long *)end_addr;
+	num_words = (end_addr - start_addr) / sizeof(vu_long);
 
 	/*
 	 * Data line test: write a pattern to the first
@@ -672,11 +669,11 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	 * '0's and '0' bits through a field of '1's (i.e.
 	 * pattern and ~pattern).
 	 */
-	addr = start;
+	addr = buf;
 	for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) {
 		val = bitpattern[j];
 		for (; val != 0; val <<= 1) {
-			*addr  = val;
+			*addr = val;
 			*dummy  = ~val; /* clear the test data off the bus */
 			readback = *addr;
 			if (readback != val) {
@@ -735,58 +732,56 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	 *
 	 * Returns:     0 if the test succeeds, 1 if the test fails.
 	 */
-	len = (end_addr - start_addr) / sizeof(vu_long);
 	pattern = (vu_long) 0xaaaaaaaa;
 	anti_pattern = (vu_long) 0x55555555;
 
-	debug("%s:%d: length = 0x%.8lx\n",
-		__func__, __LINE__, len);
+	debug("%s:%d: length = 0x%.8lx\n", __func__, __LINE__, num_words);
 	/*
 	 * Write the default pattern@each of the
 	 * power-of-two offsets.
 	 */
-	for (offset = 1; offset < len; offset <<= 1)
-		start[offset] = pattern;
+	for (offset = 1; offset < num_words; offset <<= 1)
+		addr[offset] = pattern;
 
 	/*
 	 * Check for address bits stuck high.
 	 */
 	test_offset = 0;
-	start[test_offset] = anti_pattern;
+	addr[test_offset] = anti_pattern;
 
-	for (offset = 1; offset < len; offset <<= 1) {
-		temp = start[offset];
+	for (offset = 1; offset < num_words; offset <<= 1) {
+		temp = addr[offset];
 		if (temp != pattern) {
 			printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx\n",
-				(ulong)&start[offset], pattern, temp);
+				start_addr + offset, pattern, temp);
 			errs++;
 			if (ctrlc())
 				return -1;
 		}
 	}
-	start[test_offset] = pattern;
+	addr[test_offset] = pattern;
 	WATCHDOG_RESET();
 
 	/*
 	 * Check for addr bits stuck low or shorted.
 	 */
-	for (test_offset = 1; test_offset < len; test_offset <<= 1) {
-		start[test_offset] = anti_pattern;
+	for (test_offset = 1; test_offset < num_words; test_offset <<= 1) {
+		addr[test_offset] = anti_pattern;
 
-		for (offset = 1; offset < len; offset <<= 1) {
-			temp = start[offset];
+		for (offset = 1; offset < num_words; offset <<= 1) {
+			temp = addr[offset];
 			if ((temp != pattern) && (offset != test_offset)) {
 				printf("\nFAILURE: Address bit stuck low or"
 					" shorted @ 0x%.8lx: expected 0x%.8lx,"
 					" actual 0x%.8lx\n",
-					(ulong)&start[offset], pattern, temp);
+					start_addr + offset, pattern, temp);
 				errs++;
 				if (ctrlc())
 					return -1;
 			}
 		}
-		start[test_offset] = pattern;
+		addr[test_offset] = pattern;
 	}
 
 	/*
@@ -801,14 +796,14 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	 *
 	 * Returns:     0 if the test succeeds, 1 if the test fails.
 	 */
-	num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1;
+	num_words++;
 
 	/*
 	 * Fill memory with a known pattern.
 	 */
 	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
 		WATCHDOG_RESET();
-		start[offset] = pattern;
+		addr[offset] = pattern;
 	}
 
 	/*
@@ -816,18 +811,18 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	 */
 	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
 		WATCHDOG_RESET();
-		temp = start[offset];
+		temp = addr[offset];
 		if (temp != pattern) {
 			printf("\nFAILURE (read/write) @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
-				(ulong)&start[offset], pattern, temp);
+				start_addr + offset, pattern, temp);
 			errs++;
 			if (ctrlc())
 				return -1;
 		}
 
 		anti_pattern = ~pattern;
-		start[offset] = anti_pattern;
+		addr[offset] = anti_pattern;
 	}
 
 	/*
@@ -836,28 +831,28 @@ static ulong mem_test_alt(ulong start_addr, ulong end_addr)
 	for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
 		WATCHDOG_RESET();
 		anti_pattern = ~pattern;
-		temp = start[offset];
+		temp = addr[offset];
 		if (temp != anti_pattern) {
 			printf("\nFAILURE (read/write): @ 0x%.8lx:"
 				" expected 0x%.8lx, actual 0x%.8lx)\n",
-				(ulong)&start[offset], anti_pattern, temp);
+				start_addr + offset, anti_pattern, temp);
 			errs++;
 			if (ctrlc())
 				return -1;
 		}
-		start[offset] = 0;
+		addr[offset] = 0;
 	}
 
 	return 0;
 }
 
-static ulong mem_test_quick(ulong start_addr, ulong end_addr, vu_long pattern,
-			    int iteration)
+static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr,
+			    vu_long pattern, int iteration)
 {
-	vu_long *start, *end;
+	vu_long *end;
 	vu_long *addr;
 	ulong errs = 0;
-	ulong incr;
+	ulong incr, length;
 	ulong val, readback;
 
 	/* Alternate the pattern */
@@ -875,14 +870,14 @@ static ulong mem_test_quick(ulong start_addr, ulong end_addr, vu_long pattern,
 		else
 			pattern = ~pattern;
 	}
-	start = (vu_long *)start_addr;
-	end = (vu_long *)end_addr;
+	length = (end_addr - start_addr) / sizeof(ulong);
+	end = buf + length;
 	printf("\rPattern %08lX  Writing..."
 		"%12s"
 		"\b\b\b\b\b\b\b\b\b\b",
 		pattern, "");
 
-	for (addr = start, val = pattern; addr < end; addr++) {
+	for (addr = buf, val = pattern; addr < end; addr++) {
 		WATCHDOG_RESET();
 		*addr = val;
 		val += incr;
@@ -890,13 +885,16 @@ static ulong mem_test_quick(ulong start_addr, ulong end_addr, vu_long pattern,
 
 	puts("Reading...");
 
-	for (addr = start, val = pattern; addr < end; addr++) {
+	for (addr = buf, val = pattern; addr < end; addr++) {
 		WATCHDOG_RESET();
 		readback = *addr;
 		if (readback != val) {
+			ulong offset = addr - buf;
+
 			printf("\nMem error @ 0x%08X: "
 				"found %08lX, expected %08lX\n",
-				(uint)(uintptr_t)addr, readback, val);
+				(uint)(uintptr_t)(start_addr + offset),
+				readback, val);
 			errs++;
 			if (ctrlc())
 				return -1;
@@ -916,6 +914,7 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 			char * const argv[])
 {
 	ulong start, end;
+	vu_long *buf, *dummy;
 	int iteration_limit;
 	int ret;
 	ulong errs = 0;	/* number of errors, or -1 if interrupted */
@@ -951,6 +950,8 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 	debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__,
 	      start, end);
 
+	buf = map_sysmem(start, end - start);
+	dummy = map_sysmem(CONFIG_SYS_MEMTEST_SCRATCH, sizeof(vu_long));
 	for (iteration = 0;
 			!iteration_limit || iteration < iteration_limit;
 			iteration++) {
@@ -961,11 +962,17 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
 
 		printf("Iteration: %6d\r", iteration + 1);
 		debug("\n");
-		if (alt_test)
-			errs = mem_test_alt(start, end);
-		else
-			errs = mem_test_quick(start, end, pattern, iteration);
+		if (alt_test) {
+			errs = mem_test_alt(buf, start, end, dummy);
+		} else {
+			errs = mem_test_quick(buf, start, end, pattern,
+					      iteration);
+		}
+		if (errs == -1UL)
+			break;
 	}
+	unmap_sysmem((void *)buf);
+	unmap_sysmem((void *)dummy);
 
 	if (errs == -1UL) {
 		/* Memory test was aborted - write a newline to finish off */
Signature · 1 line
1.7.7.3
author Applied
#58 lore raw

PATCH 19/20 sandbox: Update mtest to fix crashes

Quoted 4 lines · Simon Glass

Use map_sysmem() in the memory tester so that it works as expected on sandbox.

Applied to x86/master.

Quoted 3 lines
---
 common/cmd_mem.c |   97 +++++++++++++++++++++++++++++-------------------------
 1 files changed, 52 insertions(+), 45 deletions(-)
#59 lore raw

PATCH 20/20 sandbox: Allow hash functions to work correctly

In reply to Simon Glass

Use map_sysmem() so that hashing is possible on sandbox.

---
 common/hash.c |   25 +++++++++++++++++--------
 1 files changed, 17 insertions(+), 8 deletions(-)
common/hash.c +17 -8
index e92b4b1..2e0a67b 100644
@@ -28,6 +28,7 @@
 #include <hash.h>
 #include <sha1.h>
 #include <sha256.h>
+#include <asm/io.h>
 
 /*
  * These are the hash algorithms we support. Chips which support accelerated
@@ -72,10 +73,13 @@ static void store_result(struct hash_algo *algo, const u8 *sum,
 	unsigned int i;
 
 	if (*dest == '*') {
-		u8 *ptr;
+		ulong addr;
+		void *buf;
 
-		ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16);
-		memcpy(ptr, sum, algo->digest_size);
+		addr = simple_strtoul(dest + 1, NULL, 16);
+		buf = map_sysmem(addr, algo->digest_size);
+		memcpy(buf, sum, algo->digest_size);
+		unmap_sysmem(buf);
 	} else {
 		char str_output[HASH_MAX_DIGEST_SIZE * 2 + 1];
 		char *str_ptr = str_output;
@@ -105,10 +109,13 @@ static void store_result(struct hash_algo *algo, const u8 *sum,
 static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum)
 {
 	if (*verify_str == '*') {
-		u8 *ptr;
+		ulong addr;
+		void *buf;
 
-		ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16);
-		memcpy(vsum, ptr, algo->digest_size);
+		addr = simple_strtoul(verify_str + 1, NULL, 16);
+		buf = map_sysmem(addr, algo->digest_size);
+		memcpy(vsum, buf, algo->digest_size);
+		unmap_sysmem(buf);
 	} else {
 		unsigned int i;
 		char *vsum_str;
@@ -169,6 +176,7 @@ int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag,
 {
 	struct hash_algo *algo;
 	ulong addr, len;
+	void *buf;
 	u8 output[HASH_MAX_DIGEST_SIZE];
 	u8 vsum[HASH_MAX_DIGEST_SIZE];
 
@@ -189,8 +197,9 @@ int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag,
 		return 1;
 	}
 
-	algo->hash_func_ws((const unsigned char *)addr, len, output,
-			   algo->chunk_size);
+	buf = map_sysmem(addr, len);
+	algo->hash_func_ws(buf, len, output, algo->chunk_size);
+	unmap_sysmem(buf);
 
 	/* Try to avoid code bloat when verify is not needed */
 #ifdef CONFIG_HASH_VERIFY
Signature · 1 line
1.7.7.3
author Applied
#60 lore raw

PATCH 20/20 sandbox: Allow hash functions to work correctly

Quoted 3 lines · Simon Glass

Use map_sysmem() so that hashing is possible on sandbox.

Applied to x86/master.

Quoted 3 lines
---
 common/hash.c |   25 +++++++++++++++++--------
 1 files changed, 17 insertions(+), 8 deletions(-)
#61 lore raw

cover Improvements to memory, hashing functions for sandbox

In reply to Simon Glass
Quoted 32 lines · Simon Glass

This series aims to get all the memory functions running correctly on sandbox.

There was some discussion about this a while ago, and a commit was added to show a possible approach:

355a8357 sandbox: Change md command to use map_physmem

This commit was subsequently reverted because it used map_physmem() instead of the NOP that most architectures need for the memory functions.

This series introduces map_sysmem(), a NOP on all architectures except sandbox. It allows us to use a ram buffer to which all U-Boot addresses are relative. The memory commands (including hashing) are updated to use this so that sandbox can now use those commands.

Half of the mtest code is behind #ifdefs and there is duplication of some functions in both versions of the memory test. Several patches here clean this up a bit and get it working on sandbox.

The numeric setenv_ulong() function is a useful way of avoiding a 'char buf[17]; sprintf(buf, "%ld", ...); setenv("...", buf)' sequence. There is also setenv_addr(). What is missing is setenv_hex() which sets a ulong in hex format. Add this function and then make use of it in the main places: common/ drivers/ and net/.

The recently added and very basic hash instructure can help reduce code duplication in some cases. Redo the crc32 command to use this, and make it available through the 'hash' command. Also a few bugs were found in hashing with verify disabled - the arg count was not checked and a variable declaration was missing.

Quoted 7 lines

To permit the memory tester to run on sandbox, we need ctrl-C to work. To achieve this, add a proper implementation of sandbox's tstc(), with a simple FIFO for character input. An os_usleep() is added to ensure that U-Boot does not consume infinite CPU when setting at the command prompt.

With all of this it is possible to use the memory commands in sandbox, as well as crc32 and the other hashing commands.

So, aside from a few posted comments:

And pending the answer to if you plan to v2 the hash command part (and since everyone sets CONFIG_CMD_CRC32, we do want to be careful), I'm OK with applying this bundle.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130218/ebf94f74/attachment.pgp>