Skip to contentSkip to conversation

3.2.36-stable review

PATCH In review Ben Hutchings 7 participants 201 messages Dec 28, 2012 – Feb 13, 2013 Page 2 of 2

Subsystems (104)
lore
Share & tools
lore
#173 lore raw

PATCH 147/173 dm ioctl: prevent unsafe change to dm_ioctl data_size

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alasdair G Kergon <[email protected]>

commit e910d7ebecd1aac43125944a8641b6cb1a0dfabe upstream.

Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace.

The dm ioctl parameters are processed in the following sequence:
1. ctl_ioctl() calls copy_params();
2. copy_params() makes a first copy of the fixed-sized portion of the

    userspace parameters into the local variable "tmp";
 3. copy_params() then validates tmp.data_size and allocates a new
    structure big enough to hold the complete data and copies the whole
    userspace buffer there;
 4. ctl_ioctl() reads userspace data the second time and copies the whole
    buffer into the pointer "param";
 5. ctl_ioctl() reads param->data_size without any validation and stores it
    in the variable "input_param_size";

6. "input_param_size" is further used as the authoritative size of the kernel buffer.

The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory.

The fix is to ensure that the size has not changed at step 4.

This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway.

---
 drivers/md/dm-ioctl.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/md/dm-ioctl.c +8 -0
index afd9598..a651d52 100644
@@ -1566,6 +1566,14 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl **param)
 	if (copy_from_user(dmi, user, tmp.data_size))
 		goto bad;
 
+	/*
+	 * Abort if something changed the ioctl data while it was being copied.
+	 */
+	if (dmi->data_size != tmp.data_size) {
+		DMERR("rejecting ioctl: data size modified while processing parameters");
+		goto bad;
+	}
+
 	/* Wipe the user buffer so we do not return it to userspace */
 	if (secure_data && clear_user(user, tmp.data_size))
 		goto bad;
#174 lore raw

PATCH 148/173 drm/i915: do not ignore eDP bpc settings from vbt

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jani Nikula <[email protected]>

commit 2f4f649a69a9eb51f6e98130e19dd90a260a4145 upstream.

There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of

commit 4344b813f105a19f793f1fd93ad775b784648b95

Author: Daniel Vetter <[email protected]>
Date:   Fri Aug 10 11:10:20 2012 +0200

drm/i915: ignore eDP bpc settings from vbt

but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401

---
 drivers/gpu/drm/i915/intel_display.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/gpu/drm/i915/intel_display.c +11 -0
index 461a637..4154bcd 100644
@@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)
#175 lore raw

PATCH 149/173 drm/i915: do not default to 18 bpp for eDP if missing from VBT

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jani Nikula <[email protected]>

commit 9a30a61f3516871c5c638fd7c025fbaa11ddf7fe upstream.

commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c

Author: Zhenyu Wang <[email protected]>
Date:   Wed Jan 13 11:19:52 2010 +0800

drm/i915: parse eDP panel color depth from VBT block

originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in

commit 4344b813f105a19f793f1fd93ad775b784648b95

Author: Daniel Vetter <[email protected]>
Date:   Fri Aug 10 11:10:20 2012 +0200

drm/i915: ignore eDP bpc settings from vbt

Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT.

[danvet: paste in the updated commit message from irc.]
---
 drivers/gpu/drm/i915/intel_bios.c    |   11 ++---------
 drivers/gpu/drm/i915/intel_display.c |    2 +-
 2 files changed, 3 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +2 -9
index 0ed6baf..56846ed 100644
@@ -499,12 +499,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 
@@ -657,9 +653,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
drivers/gpu/drm/i915/intel_display.c +1 -1
index 4154bcd..b426d44 100644
@@ -3845,7 +3845,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			/* Use VBT settings if we have an eDP panel */
 			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
 
-			if (edp_bpc < display_bpc) {
+			if (edp_bpc && edp_bpc < display_bpc) {
 				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
 				display_bpc = edp_bpc;
 			}
#176 lore raw

PATCH 150/173 USB: cdc-wdm: fix regression on buffer deallocation

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herton Ronaldo Krzesinski <[email protected]>

[ no commit upstream, since usb_alloc_coherent usage was removed from
the driver before this was fixed ]

Commit cafbe85 ("USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core") introduced a regression: it changed the size used in usb_alloc_coherent, but failed to do the same for the usb_free_coherent calls.

It also was marked for stable and got backported to older kernels. But in the upstream kernel, the usage of usb_alloc_coherent was right after removed from the driver, so upstream doesn't have this problem, while the stable kernels still have, and thus need this fix.

---
 drivers/usb/class/cdc-wdm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/class/cdc-wdm.c +2 -2
index 9aaed0d..97b2c55 100644
@@ -301,7 +301,7 @@ static void cleanup(struct wdm_device *desc)
 			  desc->sbuf,
 			  desc->validity->transfer_dma);
 	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->bMaxPacketSize0,
+			  desc->wMaxCommand,
 			  desc->inbuf,
 			  desc->response->transfer_dma);
 	kfree(desc->orq);
@@ -788,7 +788,7 @@ out:
 err3:
 	usb_set_intfdata(intf, NULL);
 	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->bMaxPacketSize0,
+			  desc->wMaxCommand,
 			desc->inbuf,
 			desc->response->transfer_dma);
 err2:
#177 lore raw

PATCH 151/173 bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices.

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sarveshwar Bandi <[email protected]>

[ Upstream commit 0e376bd0b791ac6ac6bdb051492df0769c840848 ]

Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach.

---
 drivers/net/bonding/bond_main.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/net/bonding/bond_main.c +7 -0
index 6c284d1..202ae34 100644
@@ -1366,6 +1366,8 @@ static void bond_compute_features(struct bonding *bond)
 	struct net_device *bond_dev = bond->dev;
 	u32 vlan_features = BOND_VLAN_FEATURES;
 	unsigned short max_hard_header_len = ETH_HLEN;
+	unsigned int gso_max_size = GSO_MAX_SIZE;
+	u16 gso_max_segs = GSO_MAX_SEGS;
 	int i;
 
 	read_lock(&bond->lock);
@@ -1379,11 +1381,16 @@ static void bond_compute_features(struct bonding *bond)
 
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
+
+		gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
+		gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
 	}
 
 done:
 	bond_dev->vlan_features = vlan_features;
 	bond_dev->hard_header_len = max_hard_header_len;
+	bond_dev->gso_max_segs = gso_max_segs;
+	netif_set_gso_max_size(bond_dev, gso_max_size);
 
 	read_unlock(&bond->lock);
 
#178 lore raw

PATCH 152/173 bonding: fix race condition in bonding_store_slaves_active

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

[ Upstream commit e196c0e579902f42cf72414461fb034e5a1ffbf7 ]

Race between bonding_store_slaves_active() and slave manipulation
functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism.
NULL pointer dereference is easy to reach.
Fixed by acquiring the bond->lock for the slave walk.

v2: Make description text < 75 columns

---
 drivers/net/bonding/bond_sysfs.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/bonding/bond_sysfs.c +2 -0
index 4ef7e2f..a03fde9 100644
@@ -1579,6 +1579,7 @@ static ssize_t bonding_store_slaves_active(struct device *d,
 		goto out;
 	}
 
+	read_lock(&bond->lock);
 	bond_for_each_slave(bond, slave, i) {
 		if (!bond_is_active_slave(slave)) {
 			if (new_value)
@@ -1587,6 +1588,7 @@ static ssize_t bonding_store_slaves_active(struct device *d,
 				slave->inactive = 1;
 		}
 	}
+	read_unlock(&bond->lock);
 out:
 	return ret;
 }
#179 lore raw

PATCH 153/173 sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tommi Rantala <[email protected]>

[ Upstream commit be364c8c0f17a3dd42707b5a090b318028538eb9 ]

Trinity (the syscall fuzzer) discovered a memory leak in SCTP, reproducible e.g. with the sendto() syscall by passing invalid user space pointer in the second argument:

#include <string.h>
#include <arpa/inet.h>
#include <sys/socket.h>

int main(void)

 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;

}

As far as I can tell, the leak has been around since ~2003.

---
 net/sctp/chunk.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/sctp/chunk.c +5 -2
index 6c85564..9534bf9 100644
@@ -284,7 +284,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 			goto errout;
 		err = sctp_user_addto_chunk(chunk, offset, len, msgh->msg_iov);
 		if (err < 0)
-			goto errout;
+			goto errout_chunk_free;
 
 		offset += len;
 
@@ -324,7 +324,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 		__skb_pull(chunk->skb, (__u8 *)chunk->chunk_hdr
 			   - (__u8 *)chunk->skb->data);
 		if (err < 0)
-			goto errout;
+			goto errout_chunk_free;
 
 		sctp_datamsg_assign(msg, chunk);
 		list_add_tail(&chunk->frag_list, &msg->chunks);
@@ -332,6 +332,9 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 
 	return msg;
 
+errout_chunk_free:
+	sctp_chunk_free(chunk);
+
 errout:
 	list_for_each_safe(pos, temp, &msg->chunks) {
 		list_del_init(pos);
#180 lore raw

PATCH 154/173 sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tommi Rantala <[email protected]>

[ Upstream commit 6e51fe7572590d8d86e93b547fab6693d305fd0d ]

Consider the following program, that sets the second argument to the sendto() syscall incorrectly:

#include <string.h>
#include <arpa/inet.h>
#include <sys/socket.h>

int main(void)

 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;

}

We get -ENOMEM:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory)

Propagate the error code from sctp_user_addto_chunk(), so that we will tell user space what actually went wrong:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address)

Noticed while running Trinity (the syscall fuzzer).

---
 net/sctp/chunk.c  | 13 +++++++++----
 net/sctp/socket.c |  4 ++--
 2 files changed, 11 insertions(+), 6 deletions(-)
net/sctp/chunk.c +9 -4
index 9534bf9..0018b65 100644
@@ -183,7 +183,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 
 	msg = sctp_datamsg_new(GFP_KERNEL);
 	if (!msg)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	/* Note: Calculate this outside of the loop, so that all fragments
 	 * have the same expiration.
@@ -280,8 +280,11 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, len, frag, 0);
 
-		if (!chunk)
+		if (!chunk) {
+			err = -ENOMEM;
 			goto errout;
+		}
+
 		err = sctp_user_addto_chunk(chunk, offset, len, msgh->msg_iov);
 		if (err < 0)
 			goto errout_chunk_free;
@@ -315,8 +318,10 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, over, frag, 0);
 
-		if (!chunk)
+		if (!chunk) {
+			err = -ENOMEM;
 			goto errout;
+		}
 
 		err = sctp_user_addto_chunk(chunk, offset, over,msgh->msg_iov);
 
@@ -342,7 +347,7 @@ errout:
 		sctp_chunk_free(chunk);
 	}
 	sctp_datamsg_put(msg);
-	return NULL;
+	return ERR_PTR(err);
 }
 
 /* Check whether this message has expired. */
net/sctp/socket.c +2 -2
index 8e49d76..fa8333b 100644
@@ -1908,8 +1908,8 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
 
 	/* Break the message into multiple chunks of maximum size. */
 	datamsg = sctp_datamsg_from_user(asoc, sinfo, msg, msg_len);
-	if (!datamsg) {
-		err = -ENOMEM;
+	if (IS_ERR(datamsg)) {
+		err = PTR_ERR(datamsg);
 		goto out_free;
 	}
 
#181 lore raw

PATCH 155/173 ne2000: add the right platform device

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Cox <[email protected]>

[ Upstream commit da9da01d9199b5bb15289d0859053c9aa3a34ac0 ]

Without this udev doesn't have a way to key the ne device to the platform device.

---
 drivers/net/ethernet/8390/ne.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/8390/ne.c +1 -0
index 1063093..e8ee2bc 100644
@@ -814,6 +814,7 @@ static int __init ne_drv_probe(struct platform_device *pdev)
 		dev->irq = irq[this_dev];
 		dev->mem_end = bad[this_dev];
 	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = do_ne_probe(dev);
 	if (err) {
 		free_netdev(dev);
#182 lore raw

PATCH 156/173 irda: sir_dev: Fix copy/paste typo

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Shiyan <[email protected]>

[ Upstream commit 2355a62bcbdcc4b567425bab036bfab6ade87eed ]

---
 drivers/net/irda/sir_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/irda/sir_dev.c +1 -1
index 5039f08..43e9ab4 100644
@@ -222,7 +222,7 @@ static void sirdev_config_fsm(struct work_struct *work)
 			break;
 
 		case SIRDEV_STATE_DONGLE_SPEED:
-			if (dev->dongle_drv->reset) {
+			if (dev->dongle_drv->set_speed) {
 				ret = dev->dongle_drv->set_speed(dev, fsm->param);
 				if (ret < 0) {
 					fsm->result = ret;
#183 lore raw

PATCH 157/173 ipv4: ip_check_defrag must not modify skb before unsharing

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 1bf3751ec90cc3174e01f0d701e8449ce163d113 ]

ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later.

The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB.

---
 net/ipv4/ip_fragment.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
net/ipv4/ip_fragment.c +9 -10
index fdaabf2..a4e7131 100644
@@ -684,28 +684,27 @@ EXPORT_SYMBOL(ip_defrag);
 
 struct sk_buff *ip_check_defrag(struct sk_buff *skb, u32 user)
 {
-	const struct iphdr *iph;
+	struct iphdr iph;
 	u32 len;
 
 	if (skb->protocol != htons(ETH_P_IP))
 		return skb;
 
-	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+	if (!skb_copy_bits(skb, 0, &iph, sizeof(iph)))
 		return skb;
 
-	iph = ip_hdr(skb);
-	if (iph->ihl < 5 || iph->version != 4)
+	if (iph.ihl < 5 || iph.version != 4)
 		return skb;
-	if (!pskb_may_pull(skb, iph->ihl*4))
-		return skb;
-	iph = ip_hdr(skb);
-	len = ntohs(iph->tot_len);
-	if (skb->len < len || len < (iph->ihl * 4))
+
+	len = ntohs(iph.tot_len);
+	if (skb->len < len || len < (iph.ihl * 4))
 		return skb;
 
-	if (ip_is_fragment(ip_hdr(skb))) {
+	if (ip_is_fragment(&iph)) {
 		skb = skb_share_check(skb, GFP_ATOMIC);
 		if (skb) {
+			if (!pskb_may_pull(skb, iph.ihl*4))
+				return skb;
 			if (pskb_trim_rcsum(skb, len))
 				return skb;
 			memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
#184 lore raw

PATCH 158/173 usb/ipheth: Add iPhone 5 support

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jay Purohit <[email protected]>

[ Upstream commit af1b85e49089f945deb46258b0fc4bc9910afb22 ]

I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch.

---
 drivers/net/usb/ipheth.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/usb/ipheth.c +5 -0
index 00ed9c1..ac53952 100644
@@ -62,6 +62,7 @@
 #define USB_PRODUCT_IPAD 0x129a
 #define USB_PRODUCT_IPHONE_4_VZW 0x129c
 #define USB_PRODUCT_IPHONE_4S	0x12a0
+#define USB_PRODUCT_IPHONE_5	0x12a8
 
 #define IPHETH_USBINTF_CLASS    255
 #define IPHETH_USBINTF_SUBCLASS 253
@@ -113,6 +114,10 @@ static struct usb_device_id ipheth_table[] = {
 		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ipheth_table);
#185 lore raw

PATCH 159/173 iwlwifi: handle DMA mapping failures

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

commit 7c34158231b2eda8dcbd297be2bb1559e69cb433 upstream.

The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error").

[bwh: Backported to 3.2:
- Adjust filename, context, indentation
- Use bus(trans) instead of trans where necessary
- Use hw_params(trans).rx_page_order instead of trans_pcie->rx_page_order]

---
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +21 -2
@@ -311,6 +311,14 @@ static void iwlagn_rx_allocate(struct iw
 		rxb->page_dma = dma_map_page(bus(trans)->dev, page, 0,
 				PAGE_SIZE << hw_params(trans).rx_page_order,
 				DMA_FROM_DEVICE);
+		if (dma_mapping_error(bus(trans)->dev, rxb->page_dma)) {
+			rxb->page = NULL;
+			spin_lock_irqsave(&rxq->lock, flags);
+			list_add(&rxb->list, &rxq->rx_used);
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, hw_params(trans).rx_page_order);
+			return;
+		}
 		/* dma address must be no more than 36 bits */
 		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 		/* and also 256 byte aligned! */
@@ -489,8 +497,19 @@ static void iwl_rx_handle(struct iwl_tra
 				0, PAGE_SIZE <<
 				    hw_params(trans).rx_page_order,
 				DMA_FROM_DEVICE);
-			list_add_tail(&rxb->list, &rxq->rx_free);
-			rxq->free_count++;
+			if (dma_mapping_error(bus(trans)->dev, rxb->page_dma)) {
+				/*
+				 * free the page(s) as well to not break
+				 * the invariant that the items on the used
+				 * list have no page(s)
+				 */
+				__free_pages(rxb->page, hw_params(trans).rx_page_order);
+				rxb->page = NULL;
+				list_add_tail(&rxb->list, &rxq->rx_used);
+			} else {
+				list_add_tail(&rxb->list, &rxq->rx_free);
+				rxq->free_count++;
+			}
 		} else
 			list_add_tail(&rxb->list, &rxq->rx_used);
 
#186 lore raw

PATCH 160/173 MISC: hpilo, remove pci_disable_device

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit bcdee04ea7ae0406ae69094f6df1aacb66a69a0b upstream.

pci_disable_device(pdev) used to be in pci remove function. But this PCI device has two functions with interrupt lines connected to a single pin. The other one is a USB host controller. So when we disable the PIN there e.g. by rmmod hpilo, the controller stops working. It is because the interrupt link is disabled in ACPI since it is not refcounted yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable.

It is not the best solution whatsoever, but as a workaround until the ACPI irq link refcounting is sorted out this should fix the reported errors.

References: https://lkml.org/lkml/2008/11/4/535

Cc Grant Grundler <[email protected]>
Cc Nobin Mathew <[email protected]>
Cc Robert Hancock <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc David Altobelli <[email protected]>
---
 drivers/misc/hpilo.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/misc/hpilo.c +9 -2
@@ -735,7 +735,14 @@ static void ilo_remove(struct pci_dev *p
 	free_irq(pdev->irq, ilo_hw);
 	ilo_unmap_device(pdev, ilo_hw);
 	pci_release_regions(pdev);
-	pci_disable_device(pdev);
+	/*
+	 * pci_disable_device(pdev) used to be here. But this PCI device has
+	 * two functions with interrupt lines connected to a single pin. The
+	 * other one is a USB host controller. So when we disable the PIN here
+	 * e.g. by rmmod hpilo, the controller stops working. It is because
+	 * the interrupt link is disabled in ACPI since it is not refcounted
+	 * yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable.
+	 */
 	kfree(ilo_hw);
 	ilo_hwdev[(minor / MAX_CCB)] = 0;
 }
@@ -820,7 +827,7 @@ unmap:
 free_regions:
 	pci_release_regions(pdev);
 disable:
-	pci_disable_device(pdev);
+/*	pci_disable_device(pdev);  see comment in ilo_remove */
 free:
 	kfree(ilo_hw);
 out:
#187 lore raw

PATCH 161/173 telephony: ijx: buffer overflow in ixj_write_cid()

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[Not needed in 3.8 or newer as this driver is removed there. - gregkh]

We get this from user space and nothing has been done to ensure that these strings are NUL terminated.

---
 drivers/telephony/ixj.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/telephony/ixj.c +12 -12
index d5f923b..e1abb45 100644
@@ -3190,12 +3190,12 @@ static void ixj_write_cid(IXJ *j)
 
 	ixj_fsk_alloc(j);
 
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);
@@ -3340,12 +3340,12 @@ static void ixj_write_cidcw(IXJ *j)
 		ixj_pre_cid(j);
 	}
 	j->flags.cidcw_ack = 0;
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);
#188 lore raw

PATCH 162/173 i82975x_edac: Fix dimm label initialization

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <[email protected]>

commit 479696840239e0cc43efb3c917bdcad2174d2215 upstream.

The driver has only 4 hardcoded labels, but allows much more memory. Fix it by removing the hardcoded logic, using snprintf() instead.

[   19.833972] general protection fault: 0000 [#1] SMP
[   19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
[   19.837733] CPU 0
[   19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc.                 Precision WorkStation 390    /0MY510
[   19.837733] RIP: 0010:[<ffffffff813463a8>]  [<ffffffff813463a8>] strncpy+0x18/0x30
[   19.837733] RSP: 0018:ffff880078535b68  EFLAGS: 00010202
[   19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708
[   19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708
[   19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe
[   19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[   19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80
[   19.837733] FS:  00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   19.837733] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0
[   19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450)
[   19.837733] Stack:
[   19.837733]  ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88
[   19.837733]  ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000
[   19.837733]  0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d
[   19.837733] Call Trace:
[   19.837733]  [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac]

...

Fix bug reported at:

	https://bugzilla.redhat.com/show_bug.cgi?id=848149
And, very likely:
	https://bbs.archlinux.org/viewtopic.php?id=148033
	https://bugzilla.kernel.org/show_bug.cgi?id=47171

[bwh: Backported to 3.2:
- Adjust context
- Use csrow->channels[chan].label not csrow->channels[chan]->dimm->label]

---
 drivers/edac/i82975x_edac.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/edac/i82975x_edac.c +4 -7
@@ -355,10 +355,6 @@ static enum dev_type i82975x_dram_type(v
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
-	static const char *labels[4] = {
-							"DIMM A1", "DIMM A2",
-							"DIMM B1", "DIMM B2"
-						};
 	struct csrow_info *csrow;
 	unsigned long last_cumul_size;
 	u8 value;
@@ -399,9 +395,10 @@ static void i82975x_init_csrows(struct m
 		 *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
 		 */
 		for (chan = 0; chan < csrow->nr_channels; chan++)
-			strncpy(csrow->channels[chan].label,
-					labels[(index >> 1) + (chan * 2)],
-					EDAC_MC_LABEL_LEN);
+
+			snprintf(csrow->channels[chan].label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
+				 (chan == 0) ? 'A' : 'B',
+				 index);
 
 		if (cumul_size == last_cumul_size)
 			continue;	/* not populated */
#189 lore raw

PATCH 163/173 hpsa: gen8plus Smart Array IDs

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Miller <[email protected]>

commit fe0c9610bb68dd0aad1017456f5e3c31264d70c2 upstream.

---
 drivers/scsi/hpsa.c     |   32 +++++++++++++++++++++++++-------
 include/linux/pci_ids.h |    1 +
 2 files changed, 26 insertions(+), 7 deletions(-)
drivers/scsi/hpsa.c +25 -7
index 5ed5859..c425d7b 100644
@@ -99,6 +99,15 @@ static const struct pci_device_id hpsa_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3354},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3355},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3356},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1920},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1921},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1922},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1923},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1924},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1925},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1926},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1928},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x334d},
 	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
@@ -118,13 +127,22 @@ static struct board_type products[] = {
 	{0x3249103C, "Smart Array P812", &SA5_access},
 	{0x324a103C, "Smart Array P712m", &SA5_access},
 	{0x324b103C, "Smart Array P711m", &SA5_access},
-	{0x3350103C, "Smart Array", &SA5_access},
-	{0x3351103C, "Smart Array", &SA5_access},
-	{0x3352103C, "Smart Array", &SA5_access},
-	{0x3353103C, "Smart Array", &SA5_access},
-	{0x3354103C, "Smart Array", &SA5_access},
-	{0x3355103C, "Smart Array", &SA5_access},
-	{0x3356103C, "Smart Array", &SA5_access},
+	{0x3350103C, "Smart Array P222", &SA5_access},
+	{0x3351103C, "Smart Array P420", &SA5_access},
+	{0x3352103C, "Smart Array P421", &SA5_access},
+	{0x3353103C, "Smart Array P822", &SA5_access},
+	{0x3354103C, "Smart Array P420i", &SA5_access},
+	{0x3355103C, "Smart Array P220i", &SA5_access},
+	{0x3356103C, "Smart Array P721m", &SA5_access},
+	{0x1920103C, "Smart Array", &SA5_access},
+	{0x1921103C, "Smart Array", &SA5_access},
+	{0x1922103C, "Smart Array", &SA5_access},
+	{0x1923103C, "Smart Array", &SA5_access},
+	{0x1924103C, "Smart Array", &SA5_access},
+	{0x1925103C, "Smart Array", &SA5_access},
+	{0x1926103C, "Smart Array", &SA5_access},
+	{0x1928103C, "Smart Array", &SA5_access},
+	{0x334d103C, "Smart Array P822se", &SA5_access},
 	{0xFFFF103C, "Unknown Smart Array", &SA5_access},
 };
 
include/linux/pci_ids.h +1 -0
index fc35260..b38f737 100644
@@ -753,6 +753,7 @@
 #define PCI_DEVICE_ID_HP_CISSD		0x3238
 #define PCI_DEVICE_ID_HP_CISSE		0x323a
 #define PCI_DEVICE_ID_HP_CISSF		0x323b
+#define PCI_DEVICE_ID_HP_CISSH		0x323c
 #define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
 
 #define PCI_VENDOR_ID_PCTECH		0x1042
#190 lore raw

PATCH 164/173 Revert "mm: vmscan: fix endless loop in kswapd balancing"

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

This reverts commit 39d18dc4b8b0c000fa681cbae10ac3f8a132814b which was commit 60cefed485a02bd99b6299dad70666fe49245da7 upstream.

This was not needed and is not suitable for 3.2.y.

---

mm/vmscan.c +9 -18
@@ -2492,19 +2492,6 @@
 }
 #endif
 
-static bool zone_balanced(struct zone *zone, int order,
-			  unsigned long balance_gap, int classzone_idx)
-{
-	if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone) +
-				    balance_gap, classzone_idx, 0))
-		return false;
-
-	if (COMPACTION_BUILD && order && !compaction_suitable(zone, order))
-		return false;
-
-	return true;
-}
-
 /*
  * pgdat_balanced is used when checking if a node is balanced for high-order
  * allocations. Only zones that meet watermarks and are in a zone allowed
@@ -2564,7 +2551,8 @@
 			continue;
 		}
 
-		if (!zone_balanced(zone, order, 0, i))
+		if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone),
+							i, 0))
 			all_zones_ok = false;
 		else
 			balanced += zone->present_pages;
@@ -2667,7 +2655,8 @@
 				shrink_active_list(SWAP_CLUSTER_MAX, zone,
 							&sc, priority, 0);
 
-			if (!zone_balanced(zone, order, 0, 0)) {
+			if (!zone_watermark_ok_safe(zone, order,
+					high_wmark_pages(zone), 0, 0)) {
 				end_zone = i;
 				break;
 			} else {
@@ -2728,8 +2717,9 @@
 				(zone->present_pages +
 					KSWAPD_ZONE_BALANCE_GAP_RATIO-1) /
 				KSWAPD_ZONE_BALANCE_GAP_RATIO);
-			if (!zone_balanced(zone, order,
-					   balance_gap, end_zone)) {
+			if (!zone_watermark_ok_safe(zone, order,
+					high_wmark_pages(zone) + balance_gap,
+					end_zone, 0)) {
 				shrink_zone(priority, zone, &sc);
 
 				reclaim_state->reclaimed_slab = 0;
@@ -2756,7 +2746,8 @@
 				continue;
 			}
 
-			if (!zone_balanced(zone, order, 0, end_zone)) {
+			if (!zone_watermark_ok_safe(zone, order,
+					high_wmark_pages(zone), end_zone, 0)) {
 				all_zones_ok = 0;
 				/*
 				 * We are still under min water mark.  This
#191 lore raw

PATCH 165/173 thp, memcg: split hugepage for memcg oom on cow

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Rientjes <[email protected]>

commit 1f1d06c34f7675026326cd9f39ff91e4555cf355 upstream.

On COW, a new hugepage is allocated and charged to the memcg. If the system is oom or the charge to the memcg fails, however, the fault handler will return VM_FAULT_OOM which results in an oom kill.

Instead, it's possible to fallback to splitting the hugepage so that the COW results only in an order-0 page being allocated and charged to the memcg which has a higher liklihood to succeed. This is expensive because the hugepage must be split in the page fault handler, but it is much better than unnecessarily oom killing a process.

---
 mm/huge_memory.c |    3 +++
 mm/memory.c      |   18 +++++++++++++++---
 2 files changed, 18 insertions(+), 3 deletions(-)
mm/huge_memory.c +3 -0
index d7d7165..edfeb8c 100644
@@ -952,6 +952,8 @@ int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		count_vm_event(THP_FAULT_FALLBACK);
 		ret = do_huge_pmd_wp_page_fallback(mm, vma, address,
 						   pmd, orig_pmd, page, haddr);
+		if (ret & VM_FAULT_OOM)
+			split_huge_page(page);
 		put_page(page);
 		goto out;
 	}
@@ -959,6 +961,7 @@ int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 
 	if (unlikely(mem_cgroup_newpage_charge(new_page, mm, GFP_KERNEL))) {
 		put_page(new_page);
+		split_huge_page(page);
 		put_page(page);
 		ret |= VM_FAULT_OOM;
 		goto out;
mm/memory.c +15 -3
index 2bf9e11..1b7dc66 100644
@@ -3486,6 +3486,7 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	if (unlikely(is_vm_hugetlb_page(vma)))
 		return hugetlb_fault(mm, vma, address, flags);
 
+retry:
 	pgd = pgd_offset(mm, address);
 	pud = pud_alloc(mm, pgd, address);
 	if (!pud)
@@ -3499,13 +3500,24 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 							  pmd, flags);
 	} else {
 		pmd_t orig_pmd = *pmd;
+		int ret;
+
 		barrier();
 		if (pmd_trans_huge(orig_pmd)) {
 			if (flags & FAULT_FLAG_WRITE &&
 			    !pmd_write(orig_pmd) &&
-			    !pmd_trans_splitting(orig_pmd))
-				return do_huge_pmd_wp_page(mm, vma, address,
-							   pmd, orig_pmd);
+			    !pmd_trans_splitting(orig_pmd)) {
+				ret = do_huge_pmd_wp_page(mm, vma, address, pmd,
+							  orig_pmd);
+				/*
+				 * If COW results in an oom, the huge pmd will
+				 * have been split, so retry the fault on the
+				 * pte for a smaller charge.
+				 */
+				if (unlikely(ret & VM_FAULT_OOM))
+					goto retry;
+				return ret;
+			}
 			return 0;
 		}
 	}
#192 lore raw

PATCH 166/173 udf: fix memory leak while allocating blocks during write

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <[email protected]>

commit 2fb7d99d0de3fd8ae869f35ab682581d8455887a upstream.

Need to brelse the buffer_head stored in cur_epos and next_epos.

---
 fs/udf/inode.c |    4 ++++
 1 file changed, 4 insertions(+)
fs/udf/inode.c +4 -0
@@ -744,6 +744,8 @@ static struct buffer_head *inode_getblk(
 				goal, err);
 		if (!newblocknum) {
 			brelse(prev_epos.bh);
+			brelse(cur_epos.bh);
+			brelse(next_epos.bh);
 			*err = -ENOSPC;
 			return NULL;
 		}
@@ -774,6 +776,8 @@ static struct buffer_head *inode_getblk(
 	udf_update_extents(inode, laarr, startnum, endnum, &prev_epos);
 
 	brelse(prev_epos.bh);
+	brelse(cur_epos.bh);
+	brelse(next_epos.bh);
 
 	newblock = udf_get_pblock(inode->i_sb, newblocknum,
 				iinfo->i_location.partitionReferenceNum, 0);
#193 lore raw

PATCH 167/173 staging: vt6656: [BUG] out of bound array reference in RFbSetPower.

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit ab1dd9963137a1e122004d5378a581bf16ae9bc8 upstream.

Calling RFbSetPower with uCH zero value will cause out of bound array reference.

This causes 64 bit kernels to oops on boot.

Note: Driver does not function on 64 bit kernels and should be blacklisted on them.

---
 drivers/staging/vt6656/rf.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/staging/vt6656/rf.c +3 -0
index 593cdc7..74c0598 100644
@@ -769,6 +769,9 @@ BYTE    byPwr = pDevice->byCCKPwr;
         return TRUE;
     }
 
+	if (uCH == 0)
+		return -EINVAL;
+
     switch (uRATE) {
     case RATE_1M:
     case RATE_2M:
#194 lore raw

PATCH 168/173 staging: vt6656: 64 bit fixes: use u32 for QWORD definition.

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit a552397d5e4ef0cc0bd3e9595d6acc9a3b381171 upstream.

Size of long issues replace with u32.

---
 drivers/staging/vt6656/ttype.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/vt6656/ttype.h +4 -2
index 8e9450e..0f70562c 100644
@@ -29,6 +29,8 @@
 #ifndef __TTYPE_H__
 #define __TTYPE_H__
 
+#include <linux/types.h>
+
 /******* Common definitions and typedefs ***********************************/
 
 typedef int             BOOL;
@@ -51,8 +53,8 @@ typedef unsigned long   DWORD;          // 32-bit
 // which is NOT really a floating point number.
 typedef union tagUQuadWord {
     struct {
-        DWORD   dwLowDword;
-        DWORD   dwHighDword;
+	u32 dwLowDword;
+	u32 dwHighDword;
     } u;
     double      DoNotUseThisField;
 } UQuadWord;
#195 lore raw

PATCH 169/173 staging: vt6656: 64 bit fixes : correct all type sizes

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit 7730492855a2f9c828599bcd8d62760f96d319e4 upstream.

After this patch all BYTE/WORD/DWORD types can be replaced with the appropriate u sizes.

---
 drivers/staging/vt6656/ttype.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/staging/vt6656/ttype.h +5 -5
index 0f70562c..dfbf747 100644
@@ -44,9 +44,9 @@ typedef int             BOOL;
 
 /****** Simple typedefs  ***************************************************/
 
-typedef unsigned char   BYTE;           //  8-bit
-typedef unsigned short  WORD;           // 16-bit
-typedef unsigned long   DWORD;          // 32-bit
+typedef u8 BYTE;
+typedef u16 WORD;
+typedef u32 DWORD;
 
 // QWORD is for those situation that we want
 // an 8-byte-aligned 8 byte long structure
@@ -62,8 +62,8 @@ typedef UQuadWord       QWORD;          // 64-bit
 
 /****** Common pointer types ***********************************************/
 
-typedef unsigned long   ULONG_PTR;      // 32-bit
-typedef unsigned long   DWORD_PTR;      // 32-bit
+typedef u32 ULONG_PTR;
+typedef u32 DWORD_PTR;
 
 // boolean pointer
 
#196 lore raw

PATCH 170/173 staging: vt6656: 64 bit fixes: fix long warning messages.

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit b4dc03af5513774277c9c36b12a25cd3f25f4404 upstream.

Fixes long warning messages from patch
[PATCH 08/14] staging: vt6656: 64 bit fixes : correct all type sizes

---
 drivers/staging/vt6656/dpc.c  |    4 ++--
 drivers/staging/vt6656/key.c  |   47 +++++++++++++++++++++++++++++------------
 drivers/staging/vt6656/mac.c  |    6 ++++--
 drivers/staging/vt6656/rxtx.c |   18 ++++++++++------
 4 files changed, 51 insertions(+), 24 deletions(-)
drivers/staging/vt6656/dpc.c +2 -2
index 1ff6ea3..6f9b2b4 100644
@@ -1238,7 +1238,7 @@ static BOOL s_bHandleRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
         } else {
@@ -1349,7 +1349,7 @@ static BOOL s_bHostWepRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
 
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
drivers/staging/vt6656/key.c +33 -14

109 lines not on this page · raw message

drivers/staging/vt6656/mac.c +4 -2
index af4a29d..8fddc7b 100644
@@ -260,7 +260,8 @@ BYTE            pbyData[24];
     dwData1 <<= 16;
     dwData1 |= MAKEWORD(*(pbyAddr+4), *(pbyAddr+5));
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %X,"\
+		" KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
@@ -277,7 +278,8 @@ BYTE            pbyData[24];
     dwData2 <<= 8;
     dwData2 |= *(pbyAddr+0);
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %lX\n", wOffset, dwData2);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %X\n",
+		wOffset, dwData2);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
drivers/staging/vt6656/rxtx.c +12 -6
index 1f87213..cd9debc 100644
@@ -375,7 +375,8 @@ s_vFillTxKey (
         *(pbyIVHead+3) = (BYTE)(((pDevice->byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
         // Append IV&ExtIV after Mac Header
         *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %x\n",
+		*pdwExtIV);
 
     } else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
         pTransmitKey->wTSC15_0++;
@@ -1749,7 +1750,8 @@ s_bPacketToWirelessUsb(
         MIC_vAppend((PBYTE)&(psEthHeader->abyDstAddr[0]), 12);
         dwMIC_Priority = 0;
         MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %X, %X\n",
+		dwMICKey0, dwMICKey1);
 
         ///////////////////////////////////////////////////////////////////
 
@@ -2631,7 +2633,8 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb) {
             MIC_vAppend((PBYTE)&(sEthHeader.abyDstAddr[0]), 12);
             dwMIC_Priority = 0;
             MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY:"\
+			" %X, %X\n", dwMICKey0, dwMICKey1);
 
             uLength = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen;
 
@@ -2651,7 +2654,8 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb) {
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"cbReqCount:%d, %d, %d, %d\n", cbReqCount, cbHeaderSize, uPadding, cbIVlen);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%x, %x\n",
+			*pdwMIC_L, *pdwMIC_R);
 
         }
 
@@ -3025,7 +3029,8 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"error: KEY is GTK!!~~\n");
                     }
                     else {
-                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+				pTransmitKey->dwKeyIndex);
                         bNeedEncryption = TRUE;
                     }
                 }
@@ -3034,7 +3039,8 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
             if (pDevice->bEnableHostWEP) {
                 if ((uNodeIndex != 0) &&
                     (pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex & PAIRWISE_KEY)) {
-                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+				pTransmitKey->dwKeyIndex);
                     bNeedEncryption = TRUE;
                  }
              }
#197 lore raw

PATCH 171/173 staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit c0d05b305b00c698b0a8c1b3d46c9380bce9db45 upstream.

Fixes long issues.

---
 drivers/staging/vt6656/key.c |    6 +++---
 drivers/staging/vt6656/key.h |    8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/staging/vt6656/key.c +3 -3
index 617fda1..bf24adb 100644
@@ -223,7 +223,7 @@ BOOL KeybSetKey(
     PSKeyManagement pTable,
     PBYTE           pbyBSSID,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -675,7 +675,7 @@ BOOL KeybSetDefaultKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -791,7 +791,7 @@ BOOL KeybSetAllGroupKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
drivers/staging/vt6656/key.h +4 -4
index f749c7a..bd35d39 100644
@@ -58,7 +58,7 @@
 typedef struct tagSKeyItem
 {
     BOOL        bKeyValid;
-    unsigned long       uKeyLength;
+	u32 uKeyLength;
     BYTE        abyKey[MAX_KEY_LEN];
     QWORD       KeyRSC;
     DWORD       dwTSC47_16;
@@ -107,7 +107,7 @@ BOOL KeybSetKey(
     PSKeyManagement pTable,
     PBYTE           pbyBSSID,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -146,7 +146,7 @@ BOOL KeybSetDefaultKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -156,7 +156,7 @@ BOOL KeybSetAllGroupKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
#198 lore raw

PATCH 172/173 staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <[email protected]>

commit 70e227790d4ee4590023d8041a3485f8053593fc upstream.

The timer appears to run too fast/race on 64 bit systems.

Using msecs_to_jiffies seems to cause a deadlock on 64 bit.

A calculation of (MSecond * HZ) / 1000 appears to run satisfactory.

Change BSSIDInfoCount to u32.

After this patch the driver can be successfully connect on little endian 64/32 bit systems.

---
 drivers/staging/vt6656/wcmd.c |   20 +++++++++++---------
 drivers/staging/vt6656/wpa2.h |    4 ++--
 2 files changed, 13 insertions(+), 11 deletions(-)
drivers/staging/vt6656/wcmd.c +11 -9
index 586fbe1..b854d7e 100644
@@ -316,17 +316,19 @@ s_MgrMakeProbeRequest(
     return pTxPacket;
 }
 
-void vCommandTimerWait(void *hDeviceContext, unsigned int MSecond)
+void vCommandTimerWait(void *hDeviceContext, unsigned long MSecond)
 {
-    PSDevice        pDevice = (PSDevice)hDeviceContext;
+	PSDevice pDevice = (PSDevice)hDeviceContext;
 
-    init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (unsigned long)pDevice;
-    pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
-    // RUN_AT :1 msec ~= (HZ/1024)
-    pDevice->sTimerCommand.expires = (unsigned int)RUN_AT((MSecond * HZ) >> 10);
-    add_timer(&pDevice->sTimerCommand);
-    return;
+	init_timer(&pDevice->sTimerCommand);
+
+	pDevice->sTimerCommand.data = (unsigned long)pDevice;
+	pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
+	pDevice->sTimerCommand.expires = RUN_AT((MSecond * HZ) / 1000);
+
+	add_timer(&pDevice->sTimerCommand);
+
+	return;
 }
 
 void vRunCommand(void *hDeviceContext)
drivers/staging/vt6656/wpa2.h +2 -2
index 46c2959..c359252 100644
@@ -45,8 +45,8 @@ typedef struct tagsPMKIDInfo {
 } PMKIDInfo, *PPMKIDInfo;
 
 typedef struct tagSPMKIDCache {
-    unsigned long       BSSIDInfoCount;
-    PMKIDInfo   BSSIDInfo[MAX_PMKID_CACHE];
+	u32 BSSIDInfoCount;
+	PMKIDInfo BSSIDInfo[MAX_PMKID_CACHE];
 } SPMKIDCache, *PSPMKIDCache;
 
 
#199 lore raw

PATCH 173/173 ramoops: fix use of rounddown_pow_of_two()

In reply to Ben Hutchings

3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marco Stornelli <[email protected]>

commit fdb5950754eb3dedb9fea7c8828d3e51d9dbc3f7 upstream.

The return value of rounddown_pow_of_two wasn't evaluated, so the operation was a no-op.

---
 drivers/char/ramoops.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/char/ramoops.c +2 -2
index feda90c..9c152ab 100644
@@ -125,8 +125,8 @@ static int __init ramoops_probe(struct platform_device *pdev)
 		goto fail3;
 	}
 
-	rounddown_pow_of_two(pdata->mem_size);
-	rounddown_pow_of_two(pdata->record_size);
+	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
+	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
 
 	/* Check for the minimum memory size */
 	if (pdata->mem_size < MIN_MEM_SIZE &&
#200 lore raw
In reply to Ben Hutchings

This is the combined patch for 3.2.36-rc1 relative to 3.2.35.

Ben.

Signature · 2 lines
Ben Hutchings
The world is coming to an end.	Please log off.
Documentation/hwmon/coretemp +11 -1
index 84d46c0..eb5502e 100644
@@ -6,7 +6,9 @@ Supported chips:
     Prefix: 'coretemp'
     CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
                               0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
-                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+                              0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+                              0x36 (Cedar Trail Atom)
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
                http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@@ -65,6 +67,11 @@ Process		Processor					TjMax(C)
 		U3400						105
 		P4505/P4500 					90
 
+32nm		Atom Processors
+		Z2460						90
+		D2700/2550/2500					100
+		N2850/2800/2650/2600				100
+
 45nm		Xeon Processors 5400 Quad-Core
 		X5492, X5482, X5472, X5470, X5460, X5450	85
 		E5472, E5462, E5450/40/30/20/10/05		85
@@ -85,6 +92,9 @@ Process		Processor					TjMax(C)
 		N475/470/455/450				100
 		N280/270					90
 		330/230						125
+		E680/660/640/620				90
+		E680T/660T/640T/620T				110
+		CE4170/4150/4110				110
 
 45nm		Core2 Processors
 		Solo ULV SU3500/3300				100
Makefile +2 -2
index d985af0..3e1ca2c 100644
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 35
-EXTRAVERSION =
+SUBLEVEL = 36
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
arch/arm/include/asm/hwcap.h +2 -1
index c93a22a..3a925fb 100644
@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
arch/arm/include/asm/vfpmacros.h +6 -6
index bf53047..c49c8f7 100644
@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
arch/arm/kernel/swp_emulate.c +2 -0
index 5f452f8..5d9b1ee 100644
@@ -108,10 +108,12 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr)
 {
 	siginfo_t info;
 
+	down_read(&current->mm->mmap_sem);
 	if (find_vma(current->mm, addr) == NULL)
 		info.si_code = SEGV_MAPERR;
 	else
 		info.si_code = SEGV_ACCERR;
+	up_read(&current->mm->mmap_sem);
 
 	info.si_signo = SIGSEGV;
 	info.si_errno = 0;
arch/arm/mm/mmu.c +1 -1
index dc8c550..9e28fdb 100644
@@ -475,7 +475,7 @@ static void __init build_mem_type_table(void)
 	}
 
 	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
+		pteval_t v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
 	}
 
arch/arm/vfp/vfpmodule.c +6 -3
index f0702f3..7c815b2 100644
@@ -610,11 +610,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*
arch/cris/include/asm/io.h +33 -6
index 32567bc..ac12ae2 100644
@@ -133,12 +133,39 @@ static inline void writel(unsigned int b, volatile void __iomem *addr)
 #define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0)
 #define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0)
 #define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0)
-#define outb(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,1,1)
-#define outw(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,2,1)
-#define outl(data,port) if (cris_iops) cris_iops->write_io(port,(void*)(unsigned)data,4,1)
-#define outsb(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,1,count)
-#define outsw(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,2,count)
-#define outsl(port,addr,count) if(cris_iops) cris_iops->write_io(port,(void*)addr,3,count)
+static inline void outb(unsigned char data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 1, 1);
+}
+static inline void outw(unsigned short data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 2, 1);
+}
+static inline void outl(unsigned int data, unsigned int port)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *) &data, 4, 1);
+}
+static inline void outsb(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 1, count);
+}
+static inline void outsw(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 2, count);
+}
+static inline void outsl(unsigned int port, const void *addr,
+			 unsigned long count)
+{
+	if (cris_iops)
+		cris_iops->write_io(port, (void *)addr, 4, count);
+}
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
arch/mips/kernel/process.c +1 -3
index c47f96e..bf128d7 100644
@@ -72,9 +72,7 @@ void __noreturn cpu_idle(void)
 			}
 		}
 #ifdef CONFIG_HOTPLUG_CPU
-		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
-		    (system_state == SYSTEM_RUNNING ||
-		     system_state == SYSTEM_BOOTING))
+		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map))
 			play_dead();
 #endif
 		tick_nohz_restart_sched_tick();
arch/powerpc/kernel/head_64.S +1 -1
index 06c7251..cdf6b3f 100644
@@ -435,7 +435,7 @@ _STATIC(__after_prom_start)
 	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
 #endif
 
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_RELOCATABLE
 /*
  * Check if the kernel has to be running as relocatable kernel based on the
  * variable __run_at_load, if it is set the kernel is treated as relocatable
arch/powerpc/kvm/44x_emulate.c +2 -0
index 549bb2c..ded8a1a 100644
@@ -79,6 +79,7 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				run->dcr.dcrn = dcrn;
 				run->dcr.data =  0;
 				run->dcr.is_write = 0;
+				vcpu->arch.dcr_is_write = 0;
 				vcpu->arch.io_gpr = rt;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
@@ -100,6 +101,7 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				run->dcr.dcrn = dcrn;
 				run->dcr.data = kvmppc_get_gpr(vcpu, rs);
 				run->dcr.is_write = 1;
+				vcpu->arch.dcr_is_write = 1;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
 				emulated = EMULATE_DO_DCR;
arch/powerpc/platforms/embedded6xx/wii.c +4 -2
index 1b5dc1a..daf793b 100644
@@ -85,9 +85,11 @@ void __init wii_memory_fixups(void)
 	wii_hole_start = p[0].base + p[0].size;
 	wii_hole_size = p[1].base - wii_hole_start;
 
-	pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size);
+	pr_info("MEM1: <%08llx %08llx>\n",
+		(unsigned long long) p[0].base, (unsigned long long) p[0].size);
 	pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size);
-	pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size);
+	pr_info("MEM2: <%08llx %08llx>\n",
+		(unsigned long long) p[1].base, (unsigned long long) p[1].size);
 
 	p[0].size += wii_hole_size + p[1].size;
 
arch/s390/kvm/kvm-s390.c +1 -1
index d3cb86c..dffcaa4 100644
@@ -749,7 +749,7 @@ static int __init kvm_s390_init(void)
 	}
 	memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
 	facilities[0] &= 0xff00fff3f47c0000ULL;
-	facilities[1] &= 0x201c000000000000ULL;
+	facilities[1] &= 0x001c000000000000ULL;
 	return 0;
 }
 
arch/x86/kernel/hpet.c +2 -2
index 1bb0bf4..4970ef0 100644
@@ -429,7 +429,7 @@ void hpet_msi_unmask(struct irq_data *data)
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg |= HPET_TN_FSB;
+	cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
@@ -440,7 +440,7 @@ void hpet_msi_mask(struct irq_data *data)
 
 	/* mask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg &= ~HPET_TN_FSB;
+	cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
arch/x86/kvm/x86.c +6 -0
index 4fc5323..f4063fd 100644
@@ -578,6 +578,9 @@ static bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
 
+	if (!static_cpu_has(X86_FEATURE_XSAVE))
+		return 0;
+
 	best = kvm_find_cpuid_entry(vcpu, 1, 0);
 	return best && (best->ecx & bit(X86_FEATURE_XSAVE));
 }
@@ -6149,6 +6152,9 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	int pending_vec, max_bits, idx;
 	struct desc_ptr dt;
 
+	if (!guest_cpuid_has_xsave(vcpu) && (sregs->cr4 & X86_CR4_OSXSAVE))
+		return -EINVAL;
+
 	dt.size = sregs->idt.limit;
 	dt.address = sregs->idt.base;
 	kvm_x86_ops->set_idt(vcpu, &dt);
drivers/acpi/battery.c +77 -0

113 lines not on this page · raw message

drivers/acpi/processor_driver.c +1 -0
index 9d7bc9f..ac28db3 100644
@@ -409,6 +409,7 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event)
 		acpi_bus_generate_proc_event(device, event, 0);
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  dev_name(&device->dev), event, 0);
+		break;
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Unsupported event [0x%x]\n", event));
drivers/acpi/sleep.c +177 -163

369 lines not on this page · raw message

drivers/acpi/video.c +14 -0
index 08a44b5..0e47949 100644
@@ -389,6 +389,12 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 
drivers/acpi/video_detect.c +37 -0
index f3f0fe7..d9c0199 100644
@@ -132,6 +132,41 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
 	return AE_OK;
 }
 
+/* Force to use vendor driver when the ACPI device is known to be
+ * buggy */
+static int video_detect_force_vendor(const struct dmi_system_id *d)
+{
+	acpi_video_support |= ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
+	return 0;
+}
+
+static struct dmi_system_id video_detect_dmi_table[] = {
+	/* On Samsung X360, the BIOS will set a flag (VDRV) if generic
+	 * ACPI backlight device is used. This flag will definitively break
+	 * the backlight interface (even the vendor interface) untill next
+	 * reboot. It's why we should prevent video.ko from being used here
+	 * and we can't rely on a later call to acpi_video_unregister().
+	 */
+	{
+	 .callback = video_detect_force_vendor,
+	 .ident = "X360",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
+		DMI_MATCH(DMI_BOARD_NAME, "X360"),
+		},
+	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Asus UL30VT",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
+		},
+	},
+	{ },
+};
+
 /*
  * Returns the video capabilities of a specific ACPI graphics device
  *
@@ -164,6 +199,8 @@ long acpi_video_get_capabilities(acpi_handle graphics_handle)
 		 *		ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
 		 *}
 		 */
+
+		dmi_check_system(video_detect_dmi_table);
 	} else {
 		status = acpi_bus_get_device(graphics_handle, &tmp_dev);
 		if (ACPI_FAILURE(status)) {
drivers/ata/libata-core.c +1 -0
index 321e23e..c9540c0 100644
@@ -2529,6 +2529,7 @@ int ata_bus_probe(struct ata_port *ap)
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't
drivers/ata/libata-eh.c +1 -0
index 58db834..aea627e 100644
@@ -2599,6 +2599,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't
drivers/ata/libata-scsi.c +4 -2
index 2a5412e..dd332e5 100644
@@ -309,7 +309,8 @@ ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
 
-	if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY))
+	if (atadev && ap->ops->sw_activity_show &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY))
 		return ap->ops->sw_activity_show(atadev, buf);
 	return -EINVAL;
 }
@@ -324,7 +325,8 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
 	enum sw_activity val;
 	int rc;
 
-	if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+	if (atadev && ap->ops->sw_activity_store &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
 		val = simple_strtoul(buf, NULL, 0);
 		switch (val) {
 		case OFF: case BLINK_ON: case BLINK_OFF:
drivers/ata/sata_promise.c +13 -2
index 000fcc9..ef6e328 100644
@@ -147,6 +147,10 @@ struct pdc_port_priv {
 	dma_addr_t		pkt_dma;
 };
 
+struct pdc_host_priv {
+	spinlock_t hard_reset_lock;
+};
+
 static int pdc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int pdc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -801,9 +805,10 @@ static void pdc_hard_reset_port(struct ata_port *ap)
 	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
 	void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
 	unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
+	struct pdc_host_priv *hpriv = ap->host->private_data;
 	u8 tmp;
 
-	spin_lock(&ap->host->lock);
+	spin_lock(&hpriv->hard_reset_lock);
 
 	tmp = readb(pcictl_b1_mmio);
 	tmp &= ~(0x10 << ata_no);
@@ -814,7 +819,7 @@ static void pdc_hard_reset_port(struct ata_port *ap)
 	writeb(tmp, pcictl_b1_mmio);
 	readb(pcictl_b1_mmio); /* flush */
 
-	spin_unlock(&ap->host->lock);
+	spin_unlock(&hpriv->hard_reset_lock);
 }
 
 static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
@@ -1182,6 +1187,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 	const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
 	const struct ata_port_info *ppi[PDC_MAX_PORTS];
 	struct ata_host *host;
+	struct pdc_host_priv *hpriv;
 	void __iomem *host_mmio;
 	int n_ports, i, rc;
 	int is_sataii_tx4;
@@ -1218,6 +1224,11 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 		dev_err(&pdev->dev, "failed to allocate host\n");
 		return -ENOMEM;
 	}
+	hpriv = devm_kzalloc(&pdev->dev, sizeof *hpriv, GFP_KERNEL);
+	if (!hpriv)
+		return -ENOMEM;
+	spin_lock_init(&hpriv->hard_reset_lock);
+	host->private_data = hpriv;
 	host->iomap = pcim_iomap_table(pdev);
 
 	is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);
drivers/ata/sata_svw.c +35 -0
index c646118..833607f 100644
@@ -142,6 +142,39 @@ static int k2_sata_scr_write(struct ata_link *link,
 	return 0;
 }
 
+static int k2_sata_softreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static int k2_sata_hardreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return sata_sff_hardreset(link, class, deadline);
+}
 
 static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
@@ -346,6 +379,8 @@ static struct scsi_host_template k2_sata_sht = {
 
 static struct ata_port_operations k2_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	.softreset              = k2_sata_softreset,
+	.hardreset              = k2_sata_hardreset,
 	.sff_tf_load		= k2_sata_tf_load,
 	.sff_tf_read		= k2_sata_tf_read,
 	.sff_check_status	= k2_stat_check_status,
drivers/atm/solos-pci.c +3 -2
index d452592..adfce9f 100644
@@ -967,10 +967,11 @@ static uint32_t fpga_tx(struct solos_card *card)
 	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
 		if (tx_pending & 1) {
 			struct sk_buff *oldskb = card->tx_skb[port];
-			if (oldskb)
+			if (oldskb) {
 				pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
 						 oldskb->len, PCI_DMA_TODEVICE);
-
+				card->tx_skb[port] = NULL;
+			}
 			spin_lock(&card->tx_queue_lock);
 			skb = skb_dequeue(&card->tx_queue[port]);
 			if (!skb)
drivers/base/regmap/regmap-debugfs.c +1 -1
index 6f39747..cd252e0 100644
@@ -67,7 +67,7 @@ static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
 		/* If we're in the region the user is trying to read */
 		if (p >= *ppos) {
 			/* ...but not beyond it */
-			if (buf_pos >= count - 1 - tot_len)
+			if (buf_pos + 1 + tot_len >= count)
 				break;
 
 			/* Format the register */
drivers/bcma/driver_mips.c +1 -1
index c3e9dff..041fddf 100644
@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
 			    ~(1 << irqflag));
 	else
-		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
 
 	/* assign the new one */
 	if (irq == 0) {
drivers/bluetooth/ath3k.c +1 -0
index 5c6709d..574ce73 100644
@@ -66,6 +66,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x0489, 0xE027) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
drivers/bluetooth/btusb.c +3 -0
index 1f90dab..c5e44a3 100644
@@ -104,6 +104,8 @@ static struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
 	/* Broadcom BCM20702A0 */
+	{ USB_DEVICE(0x0b05, 0x17b5) },
+	{ USB_DEVICE(0x04ca, 0x2003) },
 	{ USB_DEVICE(0x0489, 0xe042) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
@@ -131,6 +133,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
drivers/char/agp/intel-agp.h +1 -0
index 6f24604..439d7e7 100644
@@ -235,6 +235,7 @@
 #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_M_GT2_IG		0x0166
 #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB		0x0158  /* Server */
 #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG		0x015A
+#define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG		0x016A
 
 int intel_gmch_probe(struct pci_dev *pdev,
 			       struct agp_bridge_data *bridge);
drivers/char/agp/intel-gtt.c +2 -0
index c92424c..43c4ec3 100644
@@ -1459,6 +1459,8 @@ static const struct intel_gtt_driver_description {
 	    "Ivybridge", &sandybridge_gtt_driver },
 	{ PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG,
 	    "Ivybridge", &sandybridge_gtt_driver },
+	{ PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG,
+	    "Ivybridge", &sandybridge_gtt_driver },
 	{ 0, NULL, NULL }
 };
 
drivers/char/ramoops.c +2 -2
index 7c7f42a1f8..9658116 100644
@@ -126,8 +126,8 @@ static int __init ramoops_probe(struct platform_device *pdev)
 		goto fail3;
 	}
 
-	rounddown_pow_of_two(pdata->mem_size);
-	rounddown_pow_of_two(pdata->record_size);
+	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
+	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
 
 	/* Check for the minimum memory size */
 	if (pdata->mem_size < MIN_MEM_SIZE &&
drivers/edac/i7300_edac.c +4 -4
index 6104dba..2244df0 100644
@@ -215,8 +215,8 @@ static const char *ferr_fat_fbd_name[] = {
 	[0]  = "Memory Write error on non-redundant retry or "
 	       "FBD configuration Write error on retry",
 };
-#define GET_FBD_FAT_IDX(fbderr)	(fbderr & (3 << 28))
-#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+#define GET_FBD_FAT_IDX(fbderr)	(((fbderr) >> 28) & 3)
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22))
 
 #define FERR_NF_FBD	0xa0
 static const char *ferr_nf_fbd_name[] = {
@@ -243,7 +243,7 @@ static const char *ferr_nf_fbd_name[] = {
 	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
 	[0]  = "Uncorrectable Data ECC on Replay",
 };
-#define GET_FBD_NF_IDX(fbderr)	(fbderr & (3 << 28))
+#define GET_FBD_NF_IDX(fbderr)	(((fbderr) >> 28) & 3)
 #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
 			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
 			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
@@ -485,7 +485,7 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_nf_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
+		branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0;
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 			REDMEMA, &syndrome);
drivers/edac/i82975x_edac.c +4 -7
index a5da732..01658ca 100644
@@ -355,10 +355,6 @@ static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
-	static const char *labels[4] = {
-							"DIMM A1", "DIMM A2",
-							"DIMM B1", "DIMM B2"
-						};
 	struct csrow_info *csrow;
 	unsigned long last_cumul_size;
 	u8 value;
@@ -399,9 +395,10 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		 *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
 		 */
 		for (chan = 0; chan < csrow->nr_channels; chan++)
-			strncpy(csrow->channels[chan].label,
-					labels[(index >> 1) + (chan * 2)],
-					EDAC_MC_LABEL_LEN);
+
+			snprintf(csrow->channels[chan].label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
+				 (chan == 0) ? 'A' : 'B',
+				 index);
 
 		if (cumul_size == last_cumul_size)
 			continue;	/* not populated */
drivers/firewire/net.c +9 -4
index a20f45b..7c869b7 100644
@@ -860,8 +860,8 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context,
 	if (specifier_id == IANA_SPECIFIER_ID && ver == RFC2734_SW_VERSION) {
 		buf_ptr += 2;
 		length -= IEEE1394_GASP_HDR_SIZE;
-		fwnet_incoming_packet(dev, buf_ptr, length,
-				      source_node_id, -1, true);
+		fwnet_incoming_packet(dev, buf_ptr, length, source_node_id,
+				      context->card->generation, true);
 	}
 
 	packet.payload_length = dev->rcv_buffer_size;
@@ -956,7 +956,12 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 			break;
 		}
 
-		skb_pull(skb, ptask->max_payload);
+		if (ptask->dest_node == IEEE1394_ALL_NODES) {
+			skb_pull(skb,
+				 ptask->max_payload + IEEE1394_GASP_HDR_SIZE);
+		} else {
+			skb_pull(skb, ptask->max_payload);
+		}
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
 					  dg_size, fg_off, datagram_label);
@@ -1059,7 +1064,7 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		smp_rmb();
 		node_id = dev->card->node_id;
 
-		p = skb_push(ptask->skb, 8);
+		p = skb_push(ptask->skb, IEEE1394_GASP_HDR_SIZE);
 		put_unaligned_be32(node_id << 16 | IANA_SPECIFIER_ID >> 8, p);
 		put_unaligned_be32((IANA_SPECIFIER_ID & 0xff) << 24
 						| RFC2734_SW_VERSION, &p[4]);
drivers/gpu/drm/drm_crtc_helper.c +2 -2
index d2619d7..11788f7 100644
@@ -321,8 +321,8 @@ drm_crtc_prepare_encoders(struct drm_device *dev)
  * drm_crtc_set_mode - set a mode
  * @crtc: CRTC to program
  * @mode: mode to use
- * @x: width of mode
- * @y: height of mode
+ * @x: horizontal offset into the surface
+ * @y: vertical offset into the surface
  *
  * LOCKING:
  * Caller must hold mode config lock.
drivers/gpu/drm/drm_edid.c +5 -0
index 0c1a99b..bb95d59 100644
@@ -274,6 +274,11 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 			}
 		};
 		ret = i2c_transfer(adapter, msgs, 2);
+		if (ret == -ENXIO) {
+			DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
+					adapter->name);
+			break;
+		}
 	} while (ret != 2 && --retries);
 
 	return ret == 2 ? 0 : -1;
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
index b2e3c97..d00f905 100644
@@ -339,7 +339,7 @@ static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 			seq_printf(m, "No flip due on pipe %c (plane %c)\n",
 				   pipe, plane);
 		} else {
-			if (!work->pending) {
+			if (atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
 				seq_printf(m, "Flip queued on pipe %c (plane %c)\n",
 					   pipe, plane);
 			} else {
@@ -350,7 +350,7 @@ static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 				seq_printf(m, "Stall check enabled, ");
 			else
 				seq_printf(m, "Stall check waiting for page flip ioctl, ");
-			seq_printf(m, "%d prepares\n", work->pending);
+			seq_printf(m, "%d prepares\n", atomic_read(&work->pending));
 
 			if (work->old_fb_obj) {
 				struct drm_i915_gem_object *obj = work->old_fb_obj;
drivers/gpu/drm/i915/i915_drv.c +1 -0
index 3a1bfd7..452bc51 100644
@@ -287,6 +287,7 @@ static const struct pci_device_id pciidlist[] = {		/* aka */
 	INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */
 	INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */
 	INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */
+	INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */
 	{0, 0, 0}
 };
 
drivers/gpu/drm/i915/i915_gem.c +5 -0
index dbe4dbe..5950ba3 100644
@@ -1259,6 +1259,11 @@ out:
 	case 0:
 	case -ERESTARTSYS:
 	case -EINTR:
+	case -EBUSY:
+		/*
+		 * EBUSY is ok: this just means that another thread
+		 * already did the job.
+		 */
 		return VM_FAULT_NOPAGE;
 	case -ENOMEM:
 		return VM_FAULT_OOM;
drivers/gpu/drm/i915/i915_irq.c +3 -1
index 2812d7b..93e74fb 100644
@@ -1187,7 +1187,9 @@ static void i915_pageflip_stall_check(struct drm_device *dev, int pipe)
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 
-	if (work == NULL || work->pending || !work->enable_stall_check) {
+	if (work == NULL ||
+	    atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
+	    !work->enable_stall_check) {
 		/* Either the pending flip IRQ arrived, or we're too early. Don't check */
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		return;
drivers/gpu/drm/i915/i915_reg.h +2 -0
index a294a32..7a10f5f 100644
@@ -2816,6 +2816,8 @@
 #define _PFA_CTL_1               0x68080
 #define _PFB_CTL_1               0x68880
 #define  PF_ENABLE              (1<<31)
+#define  PF_PIPE_SEL_MASK_IVB	(3<<29)
+#define  PF_PIPE_SEL_IVB(pipe)	((pipe)<<29)
 #define  PF_FILTER_MASK		(3<<23)
 #define  PF_FILTER_PROGRAMMED	(0<<23)
 #define  PF_FILTER_MED_3x3	(1<<23)
drivers/gpu/drm/i915/intel_bios.c +2 -9
index 87bb87b..0016fee 100644
@@ -495,12 +495,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 
@@ -653,9 +649,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
drivers/gpu/drm/i915/intel_display.c +51 -44

187 lines not on this page · raw message

drivers/gpu/drm/i915/intel_drv.h +4 -1
index bcadf74..5212284 100644
@@ -257,7 +257,10 @@ struct intel_unpin_work {
 	struct drm_i915_gem_object *old_fb_obj;
 	struct drm_i915_gem_object *pending_flip_obj;
 	struct drm_pending_vblank_event *event;
-	int pending;
+	atomic_t pending;
+#define INTEL_FLIP_INACTIVE	0
+#define INTEL_FLIP_PENDING	1
+#define INTEL_FLIP_COMPLETE	2
 	bool enable_stall_check;
 };
 
drivers/gpu/drm/i915/intel_lvds.c +16 -0
index 57152a7..cf5ea3d 100644
@@ -779,6 +779,22 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Gigabyte GA-D525TUD",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Supermicro X7SPA-H",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };
drivers/gpu/drm/radeon/atombios_crtc.c +5 -0
index a4011b0..a25d08a 100644
@@ -541,6 +541,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 
 		if (rdev->family < CHIP_RV770)
 			pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
+		/* use frac fb div on APUs */
+		if (ASIC_IS_DCE41(rdev))
+			pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;
+		if (ASIC_IS_DCE32(rdev) && mode->clock > 165000)
+			pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;
 	} else {
 		pll->flags |= RADEON_PLL_LEGACY;
 
drivers/gpu/drm/radeon/atombios_encoders.c +1 -1
index aca4755..f0dc04b 100644
@@ -111,7 +111,7 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
 	    ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
 	     (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE))) {
 		struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-		radeon_dp_set_link_config(connector, mode);
+		radeon_dp_set_link_config(connector, adjusted_mode);
 	}
 
 	return true;
drivers/gpu/drm/radeon/evergreen.c +2 -2
index b919b11..0977849 100644
@@ -1730,7 +1730,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 	case CHIP_SUMO:
 		rdev->config.evergreen.num_ses = 1;
 		rdev->config.evergreen.max_pipes = 4;
-		rdev->config.evergreen.max_tile_pipes = 2;
+		rdev->config.evergreen.max_tile_pipes = 4;
 		if (rdev->pdev->device == 0x9648)
 			rdev->config.evergreen.max_simds = 3;
 		else if ((rdev->pdev->device == 0x9647) ||
@@ -1819,7 +1819,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 		break;
 	case CHIP_CAICOS:
 		rdev->config.evergreen.num_ses = 1;
-		rdev->config.evergreen.max_pipes = 4;
+		rdev->config.evergreen.max_pipes = 2;
 		rdev->config.evergreen.max_tile_pipes = 2;
 		rdev->config.evergreen.max_simds = 2;
 		rdev->config.evergreen.max_backends = 1 * rdev->config.evergreen.num_ses;
drivers/hid/hid-apple.c +3 -0
index 899c712..2da7335 100644
@@ -458,6 +458,9 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_ISO_KEYBOARD },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+				USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
drivers/hid/hid-core.c +1 -0
index a21e763..279b863 100644
@@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
drivers/hid/hid-ids.h +1 -0
index 652f230..2d41336 100644
@@ -131,6 +131,7 @@
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI  0x0239
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO   0x023a
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
drivers/hid/hid-magicmouse.c +2 -0
index 2ab7175..7cf3ffe 100644
@@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
 		__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
 		__set_bit(BTN_TOOL_QUADTAP, input->keybit);
 		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(INPUT_PROP_POINTER, input->propbit);
+		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 	}
 
 	if (report_touches) {
drivers/hwmon/coretemp.c +33 -1
index 19b4412..3d630bb 100644
@@ -190,6 +190,27 @@ static ssize_t show_temp(struct device *dev,
 	return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
 }
 
+struct tjmax {
+	char const *id;
+	int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+	{ "CPU D410", 100000 },
+	{ "CPU D425", 100000 },
+	{ "CPU D510", 100000 },
+	{ "CPU D525", 100000 },
+	{ "CPU N450", 100000 },
+	{ "CPU N455", 100000 },
+	{ "CPU N470", 100000 },
+	{ "CPU N475", 100000 },
+	{ "CPU  230", 100000 },		/* Model 0x1c, stepping 2	*/
+	{ "CPU  330", 125000 },		/* Model 0x1c, stepping 2	*/
+	{ "CPU CE4110", 110000 },	/* Model 0x1c, stepping 10	*/
+	{ "CPU CE4150", 110000 },	/* Model 0x1c, stepping 10	*/
+	{ "CPU CE4170", 110000 },	/* Model 0x1c, stepping 10	*/
+};
+
 static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 {
 	/* The 100C is default for both mobile and non mobile CPUs */
@@ -200,6 +221,13 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	int err;
 	u32 eax, edx;
 	struct pci_dev *host_bridge;
+	int i;
+
+	/* explicit tjmax table entries override heuristics */
+	for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+		if (strstr(c->x86_model_id, tjmax_table[i].id))
+			return tjmax_table[i].tjmax;
+	}
 
 	/* Early chips have no MSR for TjMax */
 
@@ -208,7 +236,8 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 
 	/* Atom CPUs */
 
-	if (c->x86_model == 0x1c) {
+	if (c->x86_model == 0x1c || c->x86_model == 0x26
+	    || c->x86_model == 0x27) {
 		usemsr_ee = 0;
 
 		host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
@@ -221,6 +250,9 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 			tjmax = 90000;
 
 		pci_dev_put(host_bridge);
+	} else if (c->x86_model == 0x36) {
+		usemsr_ee = 0;
+		tjmax = 100000;
 	}
 
 	if (c->x86_model > 0xe && usemsr_ee) {
drivers/hwmon/fam15h_power.c +4 -0
index ac2d6cb..770e959 100644
@@ -31,6 +31,9 @@ MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
 MODULE_AUTHOR("Andreas Herrmann <[email protected]>");
 MODULE_LICENSE("GPL");
 
+/* Family 16h Northbridge's function 4 PCI ID */
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
+
 /* D18F3 */
 #define REG_NORTHBRIDGE_CAP		0xe8
 
@@ -256,6 +259,7 @@ static void __devexit fam15h_power_remove(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
drivers/input/joystick/walkera0701.c +4 -3
index 4dfa1ee..f8f892b 100644
@@ -196,6 +196,7 @@ static void walkera0701_close(struct input_dev *dev)
 	struct walkera_dev *w = input_get_drvdata(dev);
 
 	parport_disable_irq(w->parport);
+	hrtimer_cancel(&w->timer);
 }
 
 static int walkera0701_connect(struct walkera_dev *w, int parport)
@@ -224,6 +225,9 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	if (parport_claim(w->pardevice))
 		goto init_err1;
 
+	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	w->timer.function = timer_handler;
+
 	w->input_dev = input_allocate_device();
 	if (!w->input_dev)
 		goto init_err2;
@@ -254,8 +258,6 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	if (err)
 		goto init_err3;
 
-	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	w->timer.function = timer_handler;
 	return 0;
 
  init_err3:
@@ -271,7 +273,6 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 
 static void walkera0701_disconnect(struct walkera_dev *w)
 {
-	hrtimer_cancel(&w->timer);
 	input_unregister_device(w->input_dev);
 	parport_release(w->pardevice);
 	parport_unregister_device(w->pardevice);
drivers/input/serio/i8042-x86ia64io.h +9 -0
index cd1a843..031270c 100644
@@ -914,6 +914,7 @@ static int __init i8042_platform_init(void)
 	int retval;
 
 #ifdef CONFIG_X86
+	u8 a20_on = 0xdf;
 	/* Just return if pre-detection shows no i8042 controller exist */
 	if (!x86_platform.i8042_detect())
 		return -ENODEV;
@@ -953,6 +954,14 @@ static int __init i8042_platform_init(void)
 
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = true;
+
+	/*
+	 * A20 was already enabled during early kernel init. But some buggy
+	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
+	 * resume from S3. So we do it here and hope that nothing breaks.
+	 */
+	i8042_command(&a20_on, 0x10d1);
+	i8042_command(NULL, 0x00ff);	/* Null command for SMM firmware */
 #endif /* CONFIG_X86 */
 
 	return retval;
drivers/iommu/intel-iommu.c +9 -2
index b9062c0..9a6cc92 100644
@@ -1801,10 +1801,17 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
 			if (!pte)
 				return -ENOMEM;
 			/* It is large page*/
-			if (largepage_lvl > 1)
+			if (largepage_lvl > 1) {
 				pteval |= DMA_PTE_LARGE_PAGE;
-			else
+				/* Ensure that old small page tables are removed to make room
+				   for superpage, if they exist. */
+				dma_pte_clear_range(domain, iov_pfn,
+						    iov_pfn + lvl_to_nr_pages(largepage_lvl) - 1);
+				dma_pte_free_pagetable(domain, iov_pfn,
+						       iov_pfn + lvl_to_nr_pages(largepage_lvl) - 1);
+			} else {
 				pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
+			}
 
 		}
 		/* We don't need lock here, nobody else
drivers/leds/leds-lp5521.c +10 -6
index cb641f1..bf5cfd7 100644
@@ -198,9 +198,14 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
 
 	/* move current engine to direct mode and remember the state */
 	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+	if (ret)
+		return ret;
+
 	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
 	usleep_range(1000, 2000);
-	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+	ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+	if (ret)
+		return ret;
 
 	/* For loading, all the engines to load mode */
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
@@ -216,8 +221,7 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
 				LP5521_PROG_MEM_SIZE,
 				pattern);
 
-	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
-	return ret;
+	return lp5521_write(client, LP5521_REG_OP_MODE, mode);
 }
 
 static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
@@ -692,9 +696,9 @@ static int __devinit lp5521_probe(struct i2c_client *client,
 	 * otherwise further access to the R G B channels in the
 	 * LP5521_REG_ENABLE register will not have any effect - strange!
 	 */
-	lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
-	if (buf != LP5521_REG_R_CURR_DEFAULT) {
-		dev_err(&client->dev, "error in reseting chip\n");
+	ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
+	if (ret || buf != LP5521_REG_R_CURR_DEFAULT) {
+		dev_err(&client->dev, "error in resetting chip\n");
 		goto fail2;
 	}
 	usleep_range(10000, 20000);
drivers/md/dm-ioctl.c +8 -0
index 1ce84ed..42c873f 100644
@@ -1562,6 +1562,14 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl **param)
 	if (copy_from_user(dmi, user, tmp.data_size))
 		goto bad;
 
+	/*
+	 * Abort if something changed the ioctl data while it was being copied.
+	 */
+	if (dmi->data_size != tmp.data_size) {
+		DMERR("rejecting ioctl: data size modified while processing parameters");
+		goto bad;
+	}
+
 	/* Wipe the user buffer so we do not return it to userspace */
 	if (secure_data && clear_user(user, tmp.data_size))
 		goto bad;
drivers/md/persistent-data/dm-btree-internal.h +8 -8
index d279c76..acba54e 100644
@@ -36,13 +36,13 @@ struct node_header {
 	__le32 padding;
 } __packed;
 
-struct node {
+struct btree_node {
 	struct node_header header;
 	__le64 keys[0];
 } __packed;
 
 
-void inc_children(struct dm_transaction_manager *tm, struct node *n,
+void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 		  struct dm_btree_value_type *vt);
 
 int new_block(struct dm_btree_info *info, struct dm_block **result);
@@ -64,7 +64,7 @@ struct ro_spine {
 void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info);
 int exit_ro_spine(struct ro_spine *s);
 int ro_step(struct ro_spine *s, dm_block_t new_child);
-struct node *ro_node(struct ro_spine *s);
+struct btree_node *ro_node(struct ro_spine *s);
 
 struct shadow_spine {
 	struct dm_btree_info *info;
@@ -98,12 +98,12 @@ int shadow_root(struct shadow_spine *s);
 /*
  * Some inlines.
  */
-static inline __le64 *key_ptr(struct node *n, uint32_t index)
+static inline __le64 *key_ptr(struct btree_node *n, uint32_t index)
 {
 	return n->keys + index;
 }
 
-static inline void *value_base(struct node *n)
+static inline void *value_base(struct btree_node *n)
 {
 	return &n->keys[le32_to_cpu(n->header.max_entries)];
 }
@@ -111,7 +111,7 @@ static inline void *value_base(struct node *n)
 /*
  * FIXME: Now that value size is stored in node we don't need the third parm.
  */
-static inline void *value_ptr(struct node *n, uint32_t index, size_t value_size)
+static inline void *value_ptr(struct btree_node *n, uint32_t index, size_t value_size)
 {
 	BUG_ON(value_size != le32_to_cpu(n->header.value_size));
 	return value_base(n) + (value_size * index);
@@ -120,7 +120,7 @@ static inline void *value_ptr(struct node *n, uint32_t index, size_t value_size)
 /*
  * Assumes the values are suitably-aligned and converts to core format.
  */
-static inline uint64_t value64(struct node *n, uint32_t index)
+static inline uint64_t value64(struct btree_node *n, uint32_t index)
 {
 	__le64 *values_le = value_base(n);
 
@@ -130,7 +130,7 @@ static inline uint64_t value64(struct node *n, uint32_t index)
 /*
  * Searching for a key within a single node.
  */
-int lower_bound(struct node *n, uint64_t key);
+int lower_bound(struct btree_node *n, uint64_t key);
 
 extern struct dm_block_validator btree_node_validator;
 
drivers/md/persistent-data/dm-btree-remove.c +25 -25

164 lines not on this page · raw message

drivers/md/persistent-data/dm-btree-spine.c +3 -3
index d9a7912..2f0805c 100644
@@ -23,7 +23,7 @@ static void node_prepare_for_write(struct dm_block_validator *v,
 				   struct dm_block *b,
 				   size_t block_size)
 {
-	struct node *n = dm_block_data(b);
+	struct btree_node *n = dm_block_data(b);
 	struct node_header *h = &n->header;
 
 	h->blocknr = cpu_to_le64(dm_block_location(b));
@@ -38,7 +38,7 @@ static int node_check(struct dm_block_validator *v,
 		      struct dm_block *b,
 		      size_t block_size)
 {
-	struct node *n = dm_block_data(b);
+	struct btree_node *n = dm_block_data(b);
 	struct node_header *h = &n->header;
 	size_t value_size;
 	__le32 csum_disk;
@@ -164,7 +164,7 @@ int ro_step(struct ro_spine *s, dm_block_t new_child)
 	return r;
 }
 
-struct node *ro_node(struct ro_spine *s)
+struct btree_node *ro_node(struct ro_spine *s)
 {
 	struct dm_block *block;
 
drivers/md/persistent-data/dm-btree.c +11 -11
index bd1e7ff..bbb2ec5 100644
@@ -38,7 +38,7 @@ static void array_insert(void *base, size_t elt_size, unsigned nr_elts,
 /*----------------------------------------------------------------*/
 
 /* makes the assumption that no two keys are the same. */
-static int bsearch(struct node *n, uint64_t key, int want_hi)
+static int bsearch(struct btree_node *n, uint64_t key, int want_hi)
 {
 	int lo = -1, hi = le32_to_cpu(n->header.nr_entries);
 
@@ -58,12 +58,12 @@ static int bsearch(struct node *n, uint64_t key, int want_hi)
 	return want_hi ? hi : lo;
 }
 
-int lower_bound(struct node *n, uint64_t key)
+int lower_bound(struct btree_node *n, uint64_t key)
 {
 	return bsearch(n, key, 0);
 }
 
-void inc_children(struct dm_transaction_manager *tm, struct node *n,
+void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 		  struct dm_btree_value_type *vt)
 {
 	unsigned i;
@@ -78,7 +78,7 @@ void inc_children(struct dm_transaction_manager *tm, struct node *n,
 				value_ptr(n, i, vt->size));
 }
 
-static int insert_at(size_t value_size, struct node *node, unsigned index,
+static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
 		      uint64_t key, void *value)
 		      __dm_written_to_disk(value)
 {
@@ -123,7 +123,7 @@ int dm_btree_empty(struct dm_btree_info *info, dm_block_t *root)
 {
 	int r;
 	struct dm_block *b;
-	struct node *n;
+	struct btree_node *n;
 	size_t block_size;
 	uint32_t max_entries;
 
@@ -155,7 +155,7 @@ EXPORT_SYMBOL_GPL(dm_btree_empty);
 #define MAX_SPINE_DEPTH 64
 struct frame {
 	struct dm_block *b;
-	struct node *n;
+	struct btree_node *n;
 	unsigned level;
 	unsigned nr_children;
 	unsigned current_child;
@@ -296,7 +296,7 @@ EXPORT_SYMBOL_GPL(dm_btree_del);
 /*----------------------------------------------------------------*/
 
 static int btree_lookup_raw(struct ro_spine *s, dm_block_t block, uint64_t key,
-			    int (*search_fn)(struct node *, uint64_t),
+			    int (*search_fn)(struct btree_node *, uint64_t),
 			    uint64_t *result_key, void *v, size_t value_size)
 {
 	int i, r;
@@ -407,7 +407,7 @@ static int btree_split_sibling(struct shadow_spine *s, dm_block_t root,
 	size_t size;
 	unsigned nr_left, nr_right;
 	struct dm_block *left, *right, *parent;
-	struct node *ln, *rn, *pn;
+	struct btree_node *ln, *rn, *pn;
 	__le64 location;
 
 	left = shadow_current(s);
@@ -492,7 +492,7 @@ static int btree_split_beneath(struct shadow_spine *s, uint64_t key)
 	size_t size;
 	unsigned nr_left, nr_right;
 	struct dm_block *left, *right, *new_parent;
-	struct node *pn, *ln, *rn;
+	struct btree_node *pn, *ln, *rn;
 	__le64 val;
 
 	new_parent = shadow_current(s);
@@ -577,7 +577,7 @@ static int btree_insert_raw(struct shadow_spine *s, dm_block_t root,
 			    uint64_t key, unsigned *index)
 {
 	int r, i = *index, top = 1;
-	struct node *node;
+	struct btree_node *node;
 
 	for (;;) {
 		r = shadow_step(s, root, vt);
@@ -644,7 +644,7 @@ static int insert(struct dm_btree_info *info, dm_block_t root,
 	unsigned level, index = -1, last_level = info->levels - 1;
 	dm_block_t block = root;
 	struct shadow_spine spine;
-	struct node *n;
+	struct btree_node *n;
 	struct dm_btree_value_type le64_type;
 
 	le64_type.context = NULL;
drivers/mfd/mfd-core.c +13 -2
index 411f523..6dad2ef 100644
@@ -19,6 +19,10 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
+static struct device_type mfd_dev_type = {
+	.name	= "mfd_device",
+};
+
 int mfd_cell_enable(struct platform_device *pdev)
 {
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
@@ -88,6 +92,7 @@ static int mfd_add_device(struct device *parent, int id,
 		goto fail_device;
 
 	pdev->dev.parent = parent;
+	pdev->dev.type = &mfd_dev_type;
 
 	if (cell->pdata_size) {
 		ret = platform_device_add_data(pdev,
@@ -183,10 +188,16 @@ EXPORT_SYMBOL(mfd_add_devices);
 
 static int mfd_remove_devices_fn(struct device *dev, void *c)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct platform_device *pdev;
+	const struct mfd_cell *cell;
 	atomic_t **usage_count = c;
 
+	if (dev->type != &mfd_dev_type)
+		return 0;
+
+	pdev = to_platform_device(dev);
+	cell = mfd_get_cell(pdev);
+
 	/* find the base address of usage_count pointers (for freeing) */
 	if (!*usage_count || (cell->usage_count < *usage_count))
 		*usage_count = cell->usage_count;
drivers/misc/hpilo.c +9 -2
index fffc227..9c99680 100644
@@ -735,7 +735,14 @@ static void ilo_remove(struct pci_dev *pdev)
 	free_irq(pdev->irq, ilo_hw);
 	ilo_unmap_device(pdev, ilo_hw);
 	pci_release_regions(pdev);
-	pci_disable_device(pdev);
+	/*
+	 * pci_disable_device(pdev) used to be here. But this PCI device has
+	 * two functions with interrupt lines connected to a single pin. The
+	 * other one is a USB host controller. So when we disable the PIN here
+	 * e.g. by rmmod hpilo, the controller stops working. It is because
+	 * the interrupt link is disabled in ACPI since it is not refcounted
+	 * yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable.
+	 */
 	kfree(ilo_hw);
 	ilo_hwdev[(minor / MAX_CCB)] = 0;
 }
@@ -820,7 +827,7 @@ unmap:
 free_regions:
 	pci_release_regions(pdev);
 disable:
-	pci_disable_device(pdev);
+/*	pci_disable_device(pdev);  see comment in ilo_remove */
 free:
 	kfree(ilo_hw);
 out:
drivers/misc/sgi-xp/xpc_main.c +32 -2
index 8d082b4..d971817 100644
@@ -53,6 +53,10 @@
 #include <linux/kthread.h>
 #include "xpc.h"
 
+#ifdef CONFIG_X86_64
+#include <asm/traps.h>
+#endif
+
 /* define two XPC debug device structures to be used with dev_dbg() et al */
 
 struct device_driver xpc_dbg_name = {
@@ -1079,6 +1083,9 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
 	return NOTIFY_DONE;
 }
 
+/* Used to only allow one cpu to complete disconnect */
+static unsigned int xpc_die_disconnecting;
+
 /*
  * Notify other partitions to deactivate from us by first disengaging from all
  * references to our memory.
@@ -1092,6 +1099,9 @@ xpc_die_deactivate(void)
 	long keep_waiting;
 	long wait_to_print;
 
+	if (cmpxchg(&xpc_die_disconnecting, 0, 1))
+		return;
+
 	/* keep xpc_hb_checker thread from doing anything (just in case) */
 	xpc_exiting = 1;
 
@@ -1159,7 +1169,7 @@ xpc_die_deactivate(void)
  * about the lack of a heartbeat.
  */
 static int
-xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
+xpc_system_die(struct notifier_block *nb, unsigned long event, void *_die_args)
 {
 #ifdef CONFIG_IA64		/* !!! temporary kludge */
 	switch (event) {
@@ -1191,7 +1201,27 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		break;
 	}
 #else
-	xpc_die_deactivate();
+	struct die_args *die_args = _die_args;
+
+	switch (event) {
+	case DIE_TRAP:
+		if (die_args->trapnr == X86_TRAP_DF)
+			xpc_die_deactivate();
+
+		if (((die_args->trapnr == X86_TRAP_MF) ||
+		     (die_args->trapnr == X86_TRAP_XF)) &&
+		    !user_mode_vm(die_args->regs))
+			xpc_die_deactivate();
+
+		break;
+	case DIE_INT3:
+	case DIE_DEBUG:
+		break;
+	case DIE_OOPS:
+	case DIE_GPF:
+	default:
+		xpc_die_deactivate();
+	}
 #endif
 
 	return NOTIFY_DONE;
drivers/mmc/host/sh_mmcif.c +0 -4
index 559d30d..d5505f3 100644
@@ -1003,10 +1003,6 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 		host->sd_error = true;
 		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
 	}
-	if (host->state == STATE_IDLE) {
-		dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state);
-		return IRQ_HANDLED;
-	}
 	if (state & ~(INT_CMD12RBE | INT_CMD12CRE))
 		complete(&host->intr_wait);
 	else
drivers/mtd/nand/gpmi-nand/gpmi-lib.c +9 -0
index bb2fe60..1d02ec9 100644
@@ -135,6 +135,15 @@ int gpmi_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
+	/*
+	 * Reset BCH here, too. We got failures otherwise :(
+	 * See later BCH reset for explanation of MX23 handling
+	 */
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	if (ret)
+		goto err_out;
+
+
 	/* Choose NAND mode. */
 	writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
 
drivers/net/bonding/bond_main.c +7 -0
index 6c284d1..202ae34 100644
@@ -1366,6 +1366,8 @@ static void bond_compute_features(struct bonding *bond)
 	struct net_device *bond_dev = bond->dev;
 	u32 vlan_features = BOND_VLAN_FEATURES;
 	unsigned short max_hard_header_len = ETH_HLEN;
+	unsigned int gso_max_size = GSO_MAX_SIZE;
+	u16 gso_max_segs = GSO_MAX_SEGS;
 	int i;
 
 	read_lock(&bond->lock);
@@ -1379,11 +1381,16 @@ static void bond_compute_features(struct bonding *bond)
 
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
+
+		gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
+		gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
 	}
 
 done:
 	bond_dev->vlan_features = vlan_features;
 	bond_dev->hard_header_len = max_hard_header_len;
+	bond_dev->gso_max_segs = gso_max_segs;
+	netif_set_gso_max_size(bond_dev, gso_max_size);
 
 	read_unlock(&bond->lock);
 
drivers/net/bonding/bond_sysfs.c +2 -0
index 4ef7e2f..a03fde9 100644
@@ -1579,6 +1579,7 @@ static ssize_t bonding_store_slaves_active(struct device *d,
 		goto out;
 	}
 
+	read_lock(&bond->lock);
 	bond_for_each_slave(bond, slave, i) {
 		if (!bond_is_active_slave(slave)) {
 			if (new_value)
@@ -1587,6 +1588,7 @@ static ssize_t bonding_store_slaves_active(struct device *d,
 				slave->inactive = 1;
 		}
 	}
+	read_unlock(&bond->lock);
 out:
 	return ret;
 }
drivers/net/can/dev.c +1 -2
index 25695bd..a319057 100644
@@ -569,8 +569,7 @@ void close_candev(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	if (del_timer_sync(&priv->restart_timer))
-		dev_put(dev);
+	del_timer_sync(&priv->restart_timer);
 	can_flush_echo_skb(dev);
 }
 EXPORT_SYMBOL_GPL(close_candev);
drivers/net/ethernet/8390/ne.c +1 -0
index 1063093..e8ee2bc 100644
@@ -814,6 +814,7 @@ static int __init ne_drv_probe(struct platform_device *pdev)
 		dev->irq = irq[this_dev];
 		dev->mem_end = bad[this_dev];
 	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = do_ne_probe(dev);
 	if (err) {
 		free_netdev(dev);
drivers/net/irda/sir_dev.c +1 -1
index 5039f08..43e9ab4 100644
@@ -222,7 +222,7 @@ static void sirdev_config_fsm(struct work_struct *work)
 			break;
 
 		case SIRDEV_STATE_DONGLE_SPEED:
-			if (dev->dongle_drv->reset) {
+			if (dev->dongle_drv->set_speed) {
 				ret = dev->dongle_drv->set_speed(dev, fsm->param);
 				if (ret < 0) {
 					fsm->result = ret;
drivers/net/usb/ipheth.c +5 -0
index 00ed9c1..ac53952 100644
@@ -62,6 +62,7 @@
 #define USB_PRODUCT_IPAD 0x129a
 #define USB_PRODUCT_IPHONE_4_VZW 0x129c
 #define USB_PRODUCT_IPHONE_4S	0x12a0
+#define USB_PRODUCT_IPHONE_5	0x12a8
 
 #define IPHETH_USBINTF_CLASS    255
 #define IPHETH_USBINTF_SUBCLASS 253
@@ -113,6 +114,10 @@ static struct usb_device_id ipheth_table[] = {
 		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ipheth_table);
drivers/net/wimax/i2400m/i2400m-usb.h +3 -0
index 6650fde..9f1e947 100644
@@ -152,6 +152,9 @@ enum {
 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
 	USB_DEVICE_ID_I6050_2 = 0x0188,
+	USB_DEVICE_ID_I6150 = 0x07d6,
+	USB_DEVICE_ID_I6150_2 = 0x07d7,
+	USB_DEVICE_ID_I6150_3 = 0x07d9,
 	USB_DEVICE_ID_I6250 = 0x0187,
 };
 
drivers/net/wimax/i2400m/usb.c +6 -0
index 2c1b8b6..6bb7f3c 100644
@@ -492,6 +492,9 @@ int i2400mu_probe(struct usb_interface *iface,
 	switch (id->idProduct) {
 	case USB_DEVICE_ID_I6050:
 	case USB_DEVICE_ID_I6050_2:
+	case USB_DEVICE_ID_I6150:
+	case USB_DEVICE_ID_I6150_2:
+	case USB_DEVICE_ID_I6150_3:
 	case USB_DEVICE_ID_I6250:
 		i2400mu->i6050 = 1;
 		break;
@@ -741,6 +744,9 @@ static
 struct usb_device_id i2400mu_id_table[] = {
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_2) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_3) },
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },
drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +86 -86

184 lines not on this page · raw message

drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +3 -3
index 6335a86..69bcdb6 100644
@@ -69,13 +69,13 @@
 #define AR9300_BASE_ADDR 0x3ff
 #define AR9300_BASE_ADDR_512 0x1ff
 
-#define AR9300_OTP_BASE			0x14000
-#define AR9300_OTP_STATUS		0x15f18
+#define AR9300_OTP_BASE			(AR_SREV_9340(ah) ? 0x30000 : 0x14000)
+#define AR9300_OTP_STATUS		(AR_SREV_9340(ah) ? 0x30018 : 0x15f18)
 #define AR9300_OTP_STATUS_TYPE		0x7
 #define AR9300_OTP_STATUS_VALID		0x4
 #define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
 #define AR9300_OTP_STATUS_SM_BUSY	0x1
-#define AR9300_OTP_READ_DATA		0x15f1c
+#define AR9300_OTP_READ_DATA		(AR_SREV_9340(ah) ? 0x3001c : 0x15f1c)
 
 enum targetPowerHTRates {
 	HT_TARGET_RATE_0_8_16,
drivers/net/wireless/ath/ath9k/ar9003_hw.c +4 -7
index fb937ba..e9d73e7 100644
@@ -34,9 +34,6 @@
  */
 static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 {
-#define PCIE_PLL_ON_CREQ_DIS_L1_2P0 \
-		ar9462_pciephy_pll_on_clkreq_disable_L1_2p0
-
 #define AR9462_BB_CTX_COEFJ(x)	\
 		ar9462_##x##_baseband_core_txfir_coeff_japan_2484
 
@@ -369,13 +366,13 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 
 		/* Awake -> Sleep Setting */
 		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-				PCIE_PLL_ON_CREQ_DIS_L1_2P0,
-				ARRAY_SIZE(PCIE_PLL_ON_CREQ_DIS_L1_2P0),
+				ar9462_pciephy_clkreq_disable_L1_2p0,
+				ARRAY_SIZE(ar9462_pciephy_clkreq_disable_L1_2p0),
 				2);
 		/* Sleep -> Awake Setting */
 		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-				PCIE_PLL_ON_CREQ_DIS_L1_2P0,
-				ARRAY_SIZE(PCIE_PLL_ON_CREQ_DIS_L1_2P0),
+				ar9462_pciephy_clkreq_disable_L1_2p0,
+				ARRAY_SIZE(ar9462_pciephy_clkreq_disable_L1_2p0),
 				2);
 
 		/* Fast clock modal settings */
drivers/net/wireless/ath/ath9k/calib.c +1 -0
index d771de5..bcabfbf 100644
@@ -69,6 +69,7 @@ s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (chan && chan->noisefloor) {
 		s8 delta = chan->noisefloor -
+			   ATH9K_NF_CAL_NOISE_THRESH -
 			   ath9k_hw_get_default_nf(ah, chan);
 		if (delta > 0)
 			noise += delta;
drivers/net/wireless/ath/ath9k/calib.h +3 -0
index 05b9dbf..e300a73 100644
@@ -22,6 +22,9 @@
 #define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT     3
 #define AR_PHY_CCA_FILTERWINDOW_LENGTH          5
 
+/* Internal noise floor can vary by about 6db depending on the frequency */
+#define ATH9K_NF_CAL_NOISE_THRESH		6
+
 #define NUM_NF_READINGS       6
 #define ATH9K_NF_CAL_HIST_MAX 5
 
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +31 -4
index 17fb25d..9fefb56 100644
@@ -311,6 +311,14 @@ static void iwlagn_rx_allocate(struct iwl_trans *trans, gfp_t priority)
 		rxb->page_dma = dma_map_page(bus(trans)->dev, page, 0,
 				PAGE_SIZE << hw_params(trans).rx_page_order,
 				DMA_FROM_DEVICE);
+		if (dma_mapping_error(bus(trans)->dev, rxb->page_dma)) {
+			rxb->page = NULL;
+			spin_lock_irqsave(&rxq->lock, flags);
+			list_add(&rxb->list, &rxq->rx_used);
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, hw_params(trans).rx_page_order);
+			return;
+		}
 		/* dma address must be no more than 36 bits */
 		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 		/* and also 256 byte aligned! */
@@ -489,8 +497,19 @@ static void iwl_rx_handle(struct iwl_trans *trans)
 				0, PAGE_SIZE <<
 				    hw_params(trans).rx_page_order,
 				DMA_FROM_DEVICE);
-			list_add_tail(&rxb->list, &rxq->rx_free);
-			rxq->free_count++;
+			if (dma_mapping_error(bus(trans)->dev, rxb->page_dma)) {
+				/*
+				 * free the page(s) as well to not break
+				 * the invariant that the items on the used
+				 * list have no page(s)
+				 */
+				__free_pages(rxb->page, hw_params(trans).rx_page_order);
+				rxb->page = NULL;
+				list_add_tail(&rxb->list, &rxq->rx_used);
+			} else {
+				list_add_tail(&rxb->list, &rxq->rx_free);
+				rxq->free_count++;
+			}
 		} else
 			list_add_tail(&rxb->list, &rxq->rx_used);
 
@@ -1263,12 +1282,20 @@ static irqreturn_t iwl_isr(int irq, void *data)
 	 *    back-to-back ISRs and sporadic interrupts from our NIC.
 	 * If we have something to service, the tasklet will re-enable ints.
 	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);  /* just for debug */
+	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);
 	iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
 
 	/* Discover which interrupts are active/pending */
 	inta = iwl_read32(bus(trans), CSR_INT);
 
+	if (inta & (~inta_mask)) {
+		IWL_DEBUG_ISR(trans,
+			      "We got a masked interrupt (0x%08x)...Ack and ignore\n",
+			      inta & (~inta_mask));
+		iwl_write32(bus(trans), CSR_INT, inta & (~inta_mask));
+		inta &= inta_mask;
+	}
+
 	/* Ignore interrupt if there's nothing in NIC to service.
 	 * This may be due to IRQ shared with another device,
 	 * or due to sporadic interrupts thrown from our NIC. */
@@ -1349,7 +1376,7 @@ irqreturn_t iwl_isr_ict(int irq, void *data)
 	 * If we have something to service, the tasklet will re-enable ints.
 	 * If we *don't* have something, we'll re-enable before leaving here.
 	 */
-	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);  /* just for debug */
+	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);
 	iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
 
 
drivers/net/wireless/rt2x00/rt2800lib.c +2 -1
index fb19447..67cbe5a 100644
@@ -4208,7 +4208,8 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HW_SIGNAL_DBM |
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK |
-	    IEEE80211_HW_AMPDU_AGGREGATION;
+	    IEEE80211_HW_AMPDU_AGGREGATION |
+	    IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL;
 	/*
 	 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
 	 * unless we are capable of sending the buffered frames out after the
drivers/pnp/pnpacpi/core.c +4 -1
index d21e8f5..291906e 100644
@@ -58,7 +58,7 @@ static inline int __init is_exclusive_device(struct acpi_device *dev)
 	if (!(('0' <= (c) && (c) <= '9') || ('A' <= (c) && (c) <= 'F'))) \
 		return 0
 #define TEST_ALPHA(c) \
-	if (!('@' <= (c) || (c) <= 'Z')) \
+	if (!('A' <= (c) && (c) <= 'Z')) \
 		return 0
 static int __init ispnpidacpi(const char *id)
 {
@@ -95,6 +95,9 @@ static int pnpacpi_set_resources(struct pnp_dev *dev)
 		return -ENODEV;
 	}
 
+	if (WARN_ON_ONCE(acpi_dev != dev->data))
+		dev->data = acpi_dev;
+
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;
drivers/regulator/wm831x-dcdc.c +1 -1
index bd3531d..77a6faf 100644
@@ -330,7 +330,7 @@ static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
 	if (vsel > dcdc->dvs_vsel) {
 		ret = wm831x_set_bits(wm831x, dvs_reg,
 				      WM831X_DC1_DVS_VSEL_MASK,
-				      dcdc->dvs_vsel);
+				      vsel);
 		if (ret == 0)
 			dcdc->dvs_vsel = vsel;
 		else
drivers/s390/cio/device_pgid.c +5 -5
index 07a4fd2..daa6b90 100644
@@ -234,7 +234,7 @@ static int pgid_cmp(struct pgid *p1, struct pgid *p2)
  * Determine pathgroup state from PGID data.
  */
 static void pgid_analyze(struct ccw_device *cdev, struct pgid **p,
-			 int *mismatch, int *reserved, u8 *reset)
+			 int *mismatch, u8 *reserved, u8 *reset)
 {
 	struct pgid *pgid = &cdev->private->pgid[0];
 	struct pgid *first = NULL;
@@ -248,7 +248,7 @@ static void pgid_analyze(struct ccw_device *cdev, struct pgid **p,
 		if ((cdev->private->pgid_valid_mask & lpm) == 0)
 			continue;
 		if (pgid->inf.ps.state2 == SNID_STATE2_RESVD_ELSE)
-			*reserved = 1;
+			*reserved |= lpm;
 		if (pgid_is_reset(pgid)) {
 			*reset |= lpm;
 			continue;
@@ -316,14 +316,14 @@ static void snid_done(struct ccw_device *cdev, int rc)
 	struct subchannel *sch = to_subchannel(cdev->dev.parent);
 	struct pgid *pgid;
 	int mismatch = 0;
-	int reserved = 0;
+	u8 reserved = 0;
 	u8 reset = 0;
 	u8 donepm;
 
 	if (rc)
 		goto out;
 	pgid_analyze(cdev, &pgid, &mismatch, &reserved, &reset);
-	if (reserved)
+	if (reserved == cdev->private->pgid_valid_mask)
 		rc = -EUSERS;
 	else if (mismatch)
 		rc = -EOPNOTSUPP;
@@ -336,7 +336,7 @@ static void snid_done(struct ccw_device *cdev, int rc)
 	}
 out:
 	CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x "
-		      "todo=%02x mism=%d rsvd=%d reset=%02x\n", id->ssid,
+		      "todo=%02x mism=%d rsvd=%02x reset=%02x\n", id->ssid,
 		      id->devno, rc, cdev->private->pgid_valid_mask, sch->vpm,
 		      cdev->private->pgid_todo_mask, mismatch, reserved, reset);
 	switch (rc) {
drivers/scsi/aha152x.c +2 -2
index f17c92c..0fd5ea7 100644
@@ -2985,8 +2985,8 @@ static int get_command(char *pos, Scsi_Cmnd * ptr)
 	char *start = pos;
 	int i;
 
-	SPRINTF("0x%08x: target=%d; lun=%d; cmnd=( ",
-		(unsigned int) ptr, ptr->device->id, ptr->device->lun);
+	SPRINTF("%p: target=%d; lun=%d; cmnd=( ",
+		ptr, ptr->device->id, ptr->device->lun);
 
 	for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
 		SPRINTF("0x%02x ", ptr->cmnd[i]);
drivers/scsi/hpsa.c +25 -7
index 22523aa..0f48550 100644
@@ -98,6 +98,15 @@ static const struct pci_device_id hpsa_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3354},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3355},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3356},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1920},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1921},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1922},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1923},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1924},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1925},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1926},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1928},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x334d},
 	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
@@ -117,13 +126,22 @@ static struct board_type products[] = {
 	{0x3249103C, "Smart Array P812", &SA5_access},
 	{0x324a103C, "Smart Array P712m", &SA5_access},
 	{0x324b103C, "Smart Array P711m", &SA5_access},
-	{0x3350103C, "Smart Array", &SA5_access},
-	{0x3351103C, "Smart Array", &SA5_access},
-	{0x3352103C, "Smart Array", &SA5_access},
-	{0x3353103C, "Smart Array", &SA5_access},
-	{0x3354103C, "Smart Array", &SA5_access},
-	{0x3355103C, "Smart Array", &SA5_access},
-	{0x3356103C, "Smart Array", &SA5_access},
+	{0x3350103C, "Smart Array P222", &SA5_access},
+	{0x3351103C, "Smart Array P420", &SA5_access},
+	{0x3352103C, "Smart Array P421", &SA5_access},
+	{0x3353103C, "Smart Array P822", &SA5_access},
+	{0x3354103C, "Smart Array P420i", &SA5_access},
+	{0x3355103C, "Smart Array P220i", &SA5_access},
+	{0x3356103C, "Smart Array P721m", &SA5_access},
+	{0x1920103C, "Smart Array", &SA5_access},
+	{0x1921103C, "Smart Array", &SA5_access},
+	{0x1922103C, "Smart Array", &SA5_access},
+	{0x1923103C, "Smart Array", &SA5_access},
+	{0x1924103C, "Smart Array", &SA5_access},
+	{0x1925103C, "Smart Array", &SA5_access},
+	{0x1926103C, "Smart Array", &SA5_access},
+	{0x1928103C, "Smart Array", &SA5_access},
+	{0x334d103C, "Smart Array P822se", &SA5_access},
 	{0xFFFF103C, "Unknown Smart Array", &SA5_access},
 };
 
drivers/scsi/mvsas/mv_94xx.h +2 -12
index 8f7eb4f..487aa6f 100644
@@ -258,21 +258,11 @@ enum sas_sata_phy_regs {
 #define SPI_ADDR_VLD_94XX         	(1U << 1)
 #define SPI_CTRL_SpiStart_94XX     	(1U << 0)
 
-#define mv_ffc(x)   ffz(x)
-
 static inline int
 mv_ffc64(u64 v)
 {
-	int i;
-	i = mv_ffc((u32)v);
-	if (i >= 0)
-		return i;
-	i = mv_ffc((u32)(v>>32));
-
-	if (i != 0)
-		return 32 + i;
-
-	return -1;
+	u64 x = ~v;
+	return x ? __ffs64(x) : -1;
 }
 
 #define r_reg_set_enable(i) \
drivers/scsi/mvsas/mv_sas.h +1 -1
index c04a4f5..da24955 100644
@@ -69,7 +69,7 @@ extern struct kmem_cache *mvs_task_list_cache;
 #define DEV_IS_EXPANDER(type)	\
 	((type == EDGE_DEV) || (type == FANOUT_DEV))
 
-#define bit(n) ((u32)1 << n)
+#define bit(n) ((u64)1 << n)
 
 #define for_each_phy(__lseq_mask, __mc, __lseq)			\
 	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
drivers/scsi/qla2xxx/qla_os.c +2 -2
index f9e5b85..82a5ca6 100644
@@ -3541,9 +3541,9 @@ qla2x00_do_dpc(void *data)
 			    "ISP abort end.\n");
 		}
 
-		if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
+		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
+		    &base_vha->dpc_flags)) {
 			qla2x00_update_fcports(base_vha);
-			clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
 		}
 
 		if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) {
drivers/scsi/scsi_sysfs.c +4 -7
index 08d48a3..72ca515 100644
@@ -246,11 +246,11 @@ show_shost_active_mode(struct device *dev,
 
 static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
 
-static int check_reset_type(char *str)
+static int check_reset_type(const char *str)
 {
-	if (strncmp(str, "adapter", 10) == 0)
+	if (sysfs_streq(str, "adapter"))
 		return SCSI_ADAPTER_RESET;
-	else if (strncmp(str, "firmware", 10) == 0)
+	else if (sysfs_streq(str, "firmware"))
 		return SCSI_FIRMWARE_RESET;
 	else
 		return 0;
@@ -263,12 +263,9 @@ store_host_reset(struct device *dev, struct device_attribute *attr,
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct scsi_host_template *sht = shost->hostt;
 	int ret = -EINVAL;
-	char str[10];
 	int type;
 
-	sscanf(buf, "%s", str);
-	type = check_reset_type(str);
-
+	type = check_reset_type(buf);
 	if (!type)
 		goto exit_store_host_reset;
 
drivers/staging/bcm/InterfaceInit.c +3 -1
index a09d351..3582535 100644
@@ -4,10 +4,12 @@ static struct usb_device_id InterfaceUsbtable[] = {
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
-	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
drivers/staging/bcm/InterfaceInit.h +3 -2
index 058315a..6fa4f09 100644
@@ -8,10 +8,11 @@
 #define BCM_USB_PRODUCT_ID_T3 	0x0300
 #define BCM_USB_PRODUCT_ID_T3B 	0x0210
 #define BCM_USB_PRODUCT_ID_T3L 	0x0220
-#define BCM_USB_PRODUCT_ID_SM250 	0xbccd
 #define BCM_USB_PRODUCT_ID_SYM  0x15E
 #define BCM_USB_PRODUCT_ID_1901 0xe017
-#define BCM_USB_PRODUCT_ID_226  0x0132
+#define BCM_USB_PRODUCT_ID_226	0x0132 /* not sure if this is valid */
+#define BCM_USB_PRODUCT_ID_ZTE_226 0x172
+#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
 #define BCM_USB_PRODUCT_ID_ZTE_TU25 0x0007
 
 #define BCM_USB_MINOR_BASE 		192
drivers/staging/vt6656/dpc.c +2 -2
index 08021f4..4664e9d 100644
@@ -1238,7 +1238,7 @@ static BOOL s_bHandleRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
         } else {
@@ -1349,7 +1349,7 @@ static BOOL s_bHostWepRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
 
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
drivers/staging/vt6656/key.c +36 -17

133 lines not on this page · raw message

drivers/staging/vt6656/key.h +4 -4
index f749c7a..bd35d39 100644
@@ -58,7 +58,7 @@
 typedef struct tagSKeyItem
 {
     BOOL        bKeyValid;
-    unsigned long       uKeyLength;
+	u32 uKeyLength;
     BYTE        abyKey[MAX_KEY_LEN];
     QWORD       KeyRSC;
     DWORD       dwTSC47_16;
@@ -107,7 +107,7 @@ BOOL KeybSetKey(
     PSKeyManagement pTable,
     PBYTE           pbyBSSID,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -146,7 +146,7 @@ BOOL KeybSetDefaultKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -156,7 +156,7 @@ BOOL KeybSetAllGroupKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
drivers/staging/vt6656/mac.c +4 -2
index 26c19d1..0636d82 100644
@@ -262,7 +262,8 @@ BYTE            pbyData[24];
     dwData1 <<= 16;
     dwData1 |= MAKEWORD(*(pbyAddr+4), *(pbyAddr+5));
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %X,"\
+		" KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
@@ -279,7 +280,8 @@ BYTE            pbyData[24];
     dwData2 <<= 8;
     dwData2 |= *(pbyAddr+0);
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %lX\n", wOffset, dwData2);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %X\n",
+		wOffset, dwData2);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
drivers/staging/vt6656/rf.c +3 -0
index 3fd0478..8cf0881 100644
@@ -769,6 +769,9 @@ BYTE    byPwr = pDevice->byCCKPwr;
         return TRUE;
     }
 
+	if (uCH == 0)
+		return -EINVAL;
+
     switch (uRATE) {
     case RATE_1M:
     case RATE_2M:
drivers/staging/vt6656/rxtx.c +12 -6
index fe21868..3beb126 100644
@@ -377,7 +377,8 @@ s_vFillTxKey (
         *(pbyIVHead+3) = (BYTE)(((pDevice->byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
         // Append IV&ExtIV after Mac Header
         *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %x\n",
+		*pdwExtIV);
 
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/staging/vt6656/ttype.h +9 -7
index 8e9450e..dfbf747 100644

Lines of this file are not shown. View the raw message.

drivers/staging/vt6656/wcmd.c +11 -9
index 78ea121..31fb96a 100644

Lines of this file are not shown. View the raw message.

drivers/staging/vt6656/wpa2.h +2 -2
index 46c2959..c359252 100644

Lines of this file are not shown. View the raw message.

drivers/target/iscsi/iscsi_target.c +1 -1
index 6fa7222..3effde2 100644

Lines of this file are not shown. View the raw message.

drivers/target/iscsi/iscsi_target_login.c +4 -4
index eb0c9fe..0df4a5f 100644

Lines of this file are not shown. View the raw message.

drivers/target/iscsi/iscsi_target_nego.c +8 -2
index 98936cb..7d85f88 100644

Lines of this file are not shown. View the raw message.

drivers/target/target_core_file.c +7 -2
index cafa477..ea29eaf 100644

Lines of this file are not shown. View the raw message.

drivers/target/tcm_fc/tfc_sess.c +1 -1
index 64ddb63..3f28fdb 100644

Lines of this file are not shown. View the raw message.

drivers/telephony/ixj.c +12 -12
index d5f923b..e1abb45 100644

Lines of this file are not shown. View the raw message.

drivers/usb/class/cdc-wdm.c +2 -2
index 9aaed0d..97b2c55 100644

Lines of this file are not shown. View the raw message.

drivers/usb/core/message.c +31 -22

53 lines not on this page · raw message

drivers/usb/gadget/f_ecm.c +2 -2
index 11c07cb..72fd355 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_eem.c +2 -3
index 1a7b2dd..a9cf2052 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_midi.c +1 -0
index 3797b3d..dfd7b98 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_ncm.c +2 -2
index aab8ede..d7811ae 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_phonet.c +6 -2
index 16a509a..5431493 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_rndis.c +2 -2
index 704d1d9..817d611 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_subset.c +2 -2
index 21ab474..e5bb966 100644

Lines of this file are not shown. View the raw message.

drivers/usb/gadget/f_uvc.c +21 -18
index 2022fe49..a0abc65 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/ehci-pci.c +2 -1
index a79e64b..b71e22e 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/ehci-q.c +6 -10
index 2023733..5bb2dcb 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/ehci-sched.c +2 -2
index a60679c..34655d0 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/ohci-q.c +19 -0
index 15dc51d..e0ae777 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/pci-quirks.c +3 -1
index c2815a5..5cc401b 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci-mem.c +9 -2
index 4cddbfc..5719c4d 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci-pci.c +5 -2
index 4ed7572..aca647a 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci-ring.c +19 -13
index 7de9993..1ba98f5 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci.c +2 -2
index dab05d1..9dc5870cd 100644

Lines of this file are not shown. View the raw message.

drivers/usb/musb/cppi_dma.c +1 -0
index 318fb4e..64d7b38 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/cp210x.c +1 -0
index 35e6b5f..381d00d 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/ftdi_sio.c +2 -1
index e29a664..3f989d6 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/ftdi_sio_ids.h +6 -0
index 7b5eb74..aedf65f 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/option.c +25 -0
index a5f875d..872807b 100644

Lines of this file are not shown. View the raw message.

drivers/usb/storage/Kconfig +1 -1
index fe2d803..303c34b 100644

Lines of this file are not shown. View the raw message.

drivers/virtio/virtio_ring.c +7 -0
index c7a2c20..dc2eed1 100644

Lines of this file are not shown. View the raw message.

fs/binfmt_misc.c +4 -1
index 1e9edbd..ca52e92 100644

Lines of this file are not shown. View the raw message.

fs/binfmt_script.c +3 -1
index 396a988..e39c18a 100644

Lines of this file are not shown. View the raw message.

fs/dcache.c +1 -1
index 63c0c6b..bb7f4cc 100644

Lines of this file are not shown. View the raw message.

fs/exec.c +17 -1
index 121ccae..c27fa0d 100644

Lines of this file are not shown. View the raw message.

fs/ext4/acl.c +4 -2
index a5c29bb..8535c45 100644

Lines of this file are not shown. View the raw message.

fs/ext4/inode.c +1 -0
index bac2330..8424dda 100644

Lines of this file are not shown. View the raw message.

fs/nfs/client.c +1 -2
index 873bf00..d03a400 100644

Lines of this file are not shown. View the raw message.

fs/nfs/nfs4proc.c +17 -4
index 864b831..2f98c53 100644

Lines of this file are not shown. View the raw message.

fs/nfsd/nfs4proc.c +5 -3
index b8c5538..fe5c5fb 100644

Lines of this file are not shown. View the raw message.

fs/nfsd/nfs4state.c +1 -1
index d225b51..8b197d2 100644

Lines of this file are not shown. View the raw message.

fs/nfsd/nfs4xdr.c +10 -1
index 87a1746..800c215 100644

Lines of this file are not shown. View the raw message.

fs/nfsd/nfssvc.c +1 -1
index eda7d7e..7595582 100644

Lines of this file are not shown. View the raw message.

fs/nfsd/vfs.c +8 -2
index 5c3cd82..1ec1fde 100644

Lines of this file are not shown. View the raw message.

fs/proc/array.c +1 -1
index 3a1dafd..439b5a1 100644

Lines of this file are not shown. View the raw message.

fs/udf/inode.c +4 -0
index e2787d0..15df1a4 100644

Lines of this file are not shown. View the raw message.

include/linux/binfmts.h +1 -0
index fd88a39..f606406 100644

Lines of this file are not shown. View the raw message.

include/linux/cgroup.h +0 -1
index 1b7f9d5..9bab75f 100644

Lines of this file are not shown. View the raw message.

include/linux/freezer.h +41 -10

51 lines not on this page · raw message

include/linux/highmem.h +7 -0
index 3a93f73..52e9620 100644

Lines of this file are not shown. View the raw message.

include/linux/mempolicy.h +0 -16
index 3e8f2f7..f85c5ab 100644

Lines of this file are not shown. View the raw message.

include/linux/pci_ids.h +1 -0
index 1874c5e..5776609 100644

Lines of this file are not shown. View the raw message.

include/net/mac80211.h +5 -0
index 72eddd1..1a6201a 100644

Lines of this file are not shown. View the raw message.

kernel/cgroup.c +21 -31

52 lines not on this page · raw message

kernel/cgroup_freezer.c +4 -9
index 213c035..6c132a4 100644

Lines of this file are not shown. View the raw message.

kernel/fork.c +1 -8
index 222457a..ce0c182 100644

Lines of this file are not shown. View the raw message.

kernel/irq/manage.c +21 -2
index 7600092..382a6bd 100644

Lines of this file are not shown. View the raw message.

kernel/rcutree.c +7 -7
index a122196..1aa52af 100644

Lines of this file are not shown. View the raw message.

kernel/sched_autogroup.c +0 -4
index 429242f..f280df1 100644

Lines of this file are not shown. View the raw message.

kernel/sched_autogroup.h +0 -5
index c2f0e72..3d7a50e 100644

Lines of this file are not shown. View the raw message.

kernel/sys.c +1 -1
index d7c4ab0..f5939c2 100644

Lines of this file are not shown. View the raw message.

kernel/trace/ftrace.c +1 -1
index 25b4f4d..54dba59 100644

Lines of this file are not shown. View the raw message.

kernel/trace/ring_buffer.c +5 -2
index f5b7b5c..6fdc629 100644

Lines of this file are not shown. View the raw message.

kernel/workqueue.c +2 -2
index d551d5f..7bf068a 100644

Lines of this file are not shown. View the raw message.

mm/dmapool.c +7 -24
index c5ab33b..da1b0f0 100644

Lines of this file are not shown. View the raw message.

mm/highmem.c +13 -0
index 57d82c6..2a07f97 100644

Lines of this file are not shown. View the raw message.

mm/huge_memory.c +3 -0
index 8f005e9..470cbb4 100644

Lines of this file are not shown. View the raw message.

mm/memory.c +15 -3
index 70f5daf..15e686a 100644

Lines of this file are not shown. View the raw message.

mm/mempolicy.c +0 -22
index 4c82c21..c59d44b 100644

Lines of this file are not shown. View the raw message.

mm/shmem.c +16 -10
index 2d46e23..12b9e80 100644

Lines of this file are not shown. View the raw message.

mm/vmscan.c +9 -18
index 1e4ee1a..313381c 100644

Lines of this file are not shown. View the raw message.

net/9p/trans_virtio.c +2 -1
index 32aa983..55f0c09 100644

Lines of this file are not shown. View the raw message.

net/bluetooth/rfcomm/sock.c +2 -2
index 7ee4ead..14c4864 100644

Lines of this file are not shown. View the raw message.

net/ipv4/ip_fragment.c +9 -10
index fdaabf2..a4e7131 100644

Lines of this file are not shown. View the raw message.

net/mac80211/status.c +5 -1
index 16518f3..67df50e 100644

Lines of this file are not shown. View the raw message.

net/sctp/chunk.c +14 -6
index 6c85564..0018b65 100644

Lines of this file are not shown. View the raw message.

net/sctp/socket.c +2 -2
index 8e49d76..fa8333b 100644

Lines of this file are not shown. View the raw message.

security/device_cgroup.c +3 -3
index 92e24bb..4450fbe 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/hda_intel.c +5 -0
index 53345bc..a1e312f 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_conexant.c +1 -0
index 58c287b..498b62e 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_hdmi.c +6 -14
index c119f33..bde2615 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_realtek.c +3 -2
index 1a09fbf..f3e0b24 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_sigmatel.c +1 -1
index 2b973f5..467a73b 100644

Lines of this file are not shown. View the raw message.

sound/usb/midi.c +58 -33

91 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.