kernel BUG at mm/huge_memory.c:1798!
Subsystems (4)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
[root@localhost linux]# cat .config | grep NUMACONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=yCONFIG_ARCH_USES_NUMA_PROT_NONE=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_NUMA_BALANCING=y
# CONFIG_X86_NUMACHIP is not setCONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not setCONFIG_USE_PERCPU_NUMA_NODE_ID=yCONFIG_ACPI_NUMA=y
-----------------------------------------------------------
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas
[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1b [ 589.464792] Code: 49 8b 07 a9 00 00 00 01 75 f4 e9 2d fb ff ff 41 8b 4f 18 8b 75 8c 48 c7 c7 f8 27 81 81 31 c0 83 c1 01 e8 df 63 46 00 0f 0b 0f 0b <0f> 0b 41 8b 57 18 8b 75 8c 48 c7 c7 d8 27 81 81 31 c0 83 c2 01 [ 589.595165] RIP [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 589.656000] RSP <ffff88017a03fc08> [ 589.713937] ---[ end trace bff29bee67936f30 ]---
Signature · 8 lines
Thanks, Zhouping -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Can you test with 5a505085f0 and 4fc3f1d66b1 reverted?
Hillf
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 7 lines · Hillf Danton
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Can you test with
5a505085f0and4fc3f1d66b1reverted?
Hello Hillf, I tested it with 5a505085f0 and 4fc3f1d66b1 reverted, you are right, the issue is gone.
Thanks,
Zhouping
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 9 lines · Hillf Danton
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Can you test with
5a505085f0and4fc3f1d66b1reverted?
Hello,
does it look like the same problem?
mapcount 0 page_mapcount 1
------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798! invalid opcode: 0000 [#1] PREEMPT SMP Modules linked in: r8169 radeon cfbfillrect cfbimgblt cfbcopyarea
i2c_algo_bit backlight drm_kms_helper ttm drm agpgart CPU 3
Pid: 15825, comm: firefox Not tainted 3.8.0-rc1-00004-g637704c #1 Gigabyte Technology Co., Ltd. P35-DS3/P35-DS3
RIP: 0010:[<ffffffff810e89c9>] [<ffffffff810e89c9>] split_huge_page+0x739/0x7a0 RSP: 0018:ffff880193b43b78 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffea0002fd0000 RCX: ffffffff8175e078 RDX: 000000000000003e RSI: ffffea0002fd0000 RDI: 0000000000000246 RBP: ffff880193b43c48 R08: 000000000000ffff R09: 0000000000000000 R10: 00000000000002d5 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880173533464 R14: 00007f0973000000 R15: ffffea0002fd0000 FS: 00007f09b8db6740(0000) GS:ffff88019fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff210e78008 CR3: 0000000195379000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process firefox (pid: 15825, threadinfo ffff880193b42000, task ffff880198af9f90) Stack: 0000000000000000 ffff880193b43e1c 0000000000000000 0000000000000019 ffff880193b43c08 ffff880100000000 ffff88017af80180 ffff880100000000 ffff880173533400 ffff880198af9f90 000000009fc91540 ffff88017af801b0 Call Trace: [<ffffffff810e9d74>] __split_huge_page_pmd+0xe4/0x280 [<ffffffff810a9b9e>] ? free_hot_cold_page_list+0x3e/0x60 [<ffffffff810c22cd>] unmap_single_vma+0x77d/0x820 [<ffffffff810c2c14>] zap_page_range+0xa4/0xe0 [<ffffffff813d9846>] ? sys_recvfrom+0xd6/0x120 [<ffffffff810bfa7d>] sys_madvise+0x31d/0x660 [<ffffffff81482b2d>] system_call_fastpath+0x1a/0x1f Code: 83 39 00 f3 90 49 8b 45 00 a9 00 00 80 00 75 f3 41 ff 84 24 44
e0 ff ff f0 41 0f ba 6d 00 17 19 c0 85 c0 0f 84 d7 fa ff ff eb c8 <0f> 0b 8b 53 18 8b 75 9c ff c2 48 c7 c7 60 95 5c 81 31 c0 e8 ac RIP [<ffffffff810e89c9>] split_huge_page+0x739/0x7a0
RSP <ffff880193b43b78>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 8 lines · Alexander Beregalov
Quoted 7 lines · Hillf Danton
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Quoted 5 lines
Quoted 2 lines
Can you test with
5a505085f0and4fc3f1d66b1reverted?Hello,
does it look like the same problem?
Yes, it is, and thank you for reporting the oops.
Hillf
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798!
Quoted 38 lines
mapcount 0
page_mapcount1------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798!invalid opcode: 0000 [#1] PREEMPT SMP
Modules linked in: r8169 radeon cfbfillrect cfbimgblt cfbcopyarea
i2c_algo_bitbacklightdrm_kms_helperttm drm agpgart CPU 3
Pid: 15825, comm: firefox Not tainted 3.8.0-rc1-00004-g637704c #1 Gigabyte Technology Co., Ltd. P35-DS3/P35-DS3RIP: 0010:[<ffffffff810e89c9>] [<ffffffff810e89c9>] split_huge_page+0x739/0x7a0 RSP: 0018:ffff880193b43b78 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffea0002fd0000 RCX: ffffffff8175e078 RDX: 000000000000003e RSI: ffffea0002fd0000 RDI: 0000000000000246 RBP: ffff880193b43c48 R08: 000000000000ffff R09: 0000000000000000 R10: 00000000000002d5 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880173533464 R14: 00007f0973000000 R15: ffffea0002fd0000 FS: 00007f09b8db6740(0000) GS:ffff88019fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff210e78008 CR3: 0000000195379000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process firefox (pid: 15825, threadinfo ffff880193b42000, task ffff880198af9f90) Stack: 0000000000000000 ffff880193b43e1c 0000000000000000 0000000000000019 ffff880193b43c08 ffff880100000000 ffff88017af80180 ffff880100000000 ffff880173533400 ffff880198af9f90 000000009fc91540 ffff88017af801b0 Call Trace: [<ffffffff810e9d74>] __split_huge_page_pmd+0xe4/0x280 [<ffffffff810a9b9e>] ? free_hot_cold_page_list+0x3e/0x60 [<ffffffff810c22cd>] unmap_single_vma+0x77d/0x820 [<ffffffff810c2c14>] zap_page_range+0xa4/0xe0 [<ffffffff813d9846>] ? sys_recvfrom+0xd6/0x120 [<ffffffff810bfa7d>] sys_madvise+0x31d/0x660 [<ffffffff81482b2d>] system_call_fastpath+0x1a/0x1f Code: 83 39 00 f3 90 49 8b 45 00 a9 00 00 80 00 75 f3 41 ff 84 24 44
Quoted 4 lines
e0 ff ff f0 41 0f ba 6d 00 17 19 c0 85 c0 0f 84 d7 fa ff ff eb c8 <0f> 0b 8b 53 18 8b 75 9c ff c2 48 c7 c7 60 95 5c 81 31 c0 e8 ac RIP [<
ffffffff810e89c9>]split_huge_page+0x739/0x7a0
RSP <ffff880193b43b78>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 11 lines · Hillf Danton
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Can you test with
5a505085f0and4fc3f1d66b1reverted?Hillf
(for people from mailing lists, please cc me when replying)
Same thing?
mapcount 0 page_mapcount 1
------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798! invalid opcode: 0000 [#1] SMP Modules linked in: usb_storage wacom CPU 3 Pid: 1287, comm: thunderbird Not tainted 3.8.0-rc1+ #5 HP-Pavilion AU992AA-ABL e9262f/Indio RIP: 0010:[<ffffffff810c12c0>] [<ffffffff810c12c0>] 0xffffffff810c12c0 RSP: 0018:ffff880216887c58 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffea00065d0000 RCX: 0000000000000038 RDX: 000000000000002c RSI: 0000000000000046 RDI: ffffffff818e9e34 RBP: ffff880216887cd8 R08: 000000000000000a R09: 0000000000000000 R10: 0000000000000272 R11: 0000000000000271 R12: ffff880203fbad10 R13: 00007f1160e00000 R14: 0000000000000000 R15: ffffea00065d0000 FS: 00007f1180fca740(0000) GS:ffff88022fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca86e18000 CR3: 00000002168e3000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process thunderbird (pid: 1287, threadinfo ffff880216886000, task ffff8802259c4380) Stack: ffff880216887c68 ffffffff8145f284 ffff880216887cb8 ffff8801f9c24ac0 00000000065d0000 ffff8801f9c24af0 0000000000000000 ffff880216887cf8 0000000000000000 00000007f1160e00 0000000000000000 ffffea00065d0000 Call Trace: [<ffffffff8145f284>] ? 0xffffffff8145f284 [<ffffffff810c2310>] 0xffffffff810c2310 [<ffffffff810a69ea>] 0xffffffff810a69ea [<ffffffff8106bbd8>] ? 0xffffffff8106bbd8 [<ffffffff810a7710>] 0xffffffff810a7710 [<ffffffff810a4a1d>] 0xffffffff810a4a1d [<ffffffff8106e062>] ? 0xffffffff8106e062 [<ffffffff810adf84>] ? 0xffffffff810adf84 [<ffffffff81460952>] 0xffffffff81460952 Code: 6d 81 31 c0 8b 75 c4 83 c2 01 e8 c4 94 39 00 e9 83 fb ff ff 0f 0b
0f 0b 0f 0b f3 90 48 8b 03 a9 00 00 80 00 75 f4 e9 b6 fb ff ff <0f> 0b 0f 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 49 89 d1 48 RIP [<ffffffff810c12c0>] 0xffffffff810c12c0
RSP <ffff880216887c58>
---[ end trace 0d442da0022ecdd1 ]---
I don't have KALLSYMS, so after running through ksymoops:
Quoted 8 lines
Quoted 8 lines
RIP;
ffffffff810c12c0<split_huge_page+600/610> <=====RBX;
ffffea00065d0000<phys_startup_64+ffffea00055d0000/ffffffff80000000> RDI;ffffffff818e9e34<logbuf_lock+0/4>
RBP;ffff880216887cd8<phys_startup_64+ffff880215887cd8/ffffffff80000000> R12;ffff880203fbad10<phys_startup_64+ffff880202fbad10/ffffffff80000000> R13;00007f1160e00000<phys_startup_64+7f115fe00000/ffffffff80000000> R15;ffffea00065d0000<phys_startup_64+ffffea00055d0000/ffffffff80000000>
Trace; ffffffff8145f284 <schedule+24/70> Trace; ffffffff810c2310 <__split_huge_page_pmd+b0/1b0> Trace; ffffffff810a69ea <unmap_single_vma+25a/700> Trace; ffffffff8106bbd8 <futex_wake+108/130> Trace; ffffffff810a7710 <zap_page_range+90/d0> Trace; ffffffff810a4a1d <sys_madvise+25d/690> Trace; ffffffff8106e062 <sys_futex+142/1a0> Trace; ffffffff810adf84 <vm_munmap+54/70> Trace; ffffffff81460952 <system_call_fastpath+16/1b>
Code; ffffffff810c1295 <split_huge_page+5d5/610> 0000000000000000 <_RIP>:
Code; ffffffff810c1295 <split_huge_page+5d5/610>
0: 6d insl (%dx),%es:(%rdi)
Code; ffffffff810c1296 <split_huge_page+5d6/610>
1: 81 31 c0 8b 75 c4 xorl $0xc4758bc0,(%rcx)
Code; ffffffff810c129c <split_huge_page+5dc/610>
7: 83 c2 01 add $0x1,%edx
Code; ffffffff810c129f <split_huge_page+5df/610>
a: e8 c4 94 39 00 callq 3994d3 <_RIP+0x3994d3>
Code; ffffffff810c12a4 <split_huge_page+5e4/610>
f: e9 83 fb ff ff jmpq fffffffffffffb97
<_RIP+0xfffffffffffffb97>
Code; ffffffff810c12a9 <split_huge_page+5e9/610>
14: 0f 0b ud2
Code; ffffffff810c12ab <split_huge_page+5eb/610>
16: 0f 0b ud2
Code; ffffffff810c12ad <split_huge_page+5ed/610>
18: 0f 0b ud2
Code; ffffffff810c12af <split_huge_page+5ef/610>
1a: f3 90 pause
Code; ffffffff810c12b1 <split_huge_page+5f1/610>
1c: 48 8b 03 mov (%rbx),%rax
Code; ffffffff810c12b4 <split_huge_page+5f4/610>
1f: a9 00 00 80 00 test $0x800000,%eax
Code; ffffffff810c12b9 <split_huge_page+5f9/610>
24: 75 f4 jne 1a <_RIP+0x1a>
Code; ffffffff810c12bb <split_huge_page+5fb/610>
26: e9 b6 fb ff ff jmpq fffffffffffffbe1
<_RIP+0xfffffffffffffbe1>
Code; ffffffff810c12c0 <split_huge_page+600/610> <=====
2b: 0f 0b ud2 <=====
Code; ffffffff810c12c2 <split_huge_page+602/610>
2d: 0f 0b ud2
Code; ffffffff810c12c4 <split_huge_page+604/610>
2f: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1)
Code; ffffffff810c12cb <split_huge_page+60b/610>
36: 00 00 00 00 00
Code; ffffffff810c12d0 <do_huge_pmd_wp_page+0/840>
3b: 55 push %rbp
Code; ffffffff810c12d1 <do_huge_pmd_wp_page+1/840>
3c: 49 89 d1 mov %rdx,%r9
Code; ffffffff810c12d4 <do_huge_pmd_wp_page+4/840>
3f: 48 rex.W
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 8 lines · Alex Xu
Quoted 7 lines · Hillf Danton
Quoted 5 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Quoted 8 lines
Quoted 4 lines
Can you test with
5a505085f0and4fc3f1d66b1reverted?Hillf
(for people from mailing lists, please cc me when replying)
Same thing?
Yes and thank you very much for reporting it.
Hillf
Quoted 4 lines
mapcount 0
page_mapcount1------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798!
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zhouping LiuHello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under some pressure condition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):
[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---
I attached the config file, hope it can make some help.
Thanks,
Zhouping
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.8.0-rc1 Kernel Configuration
#CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_CPU_AUTOPROBE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_HAVE_IRQ_WORK=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_FHANDLE=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not setCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not setCONFIG_IRQ_TIME_ACCOUNTING=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_USER_QS is not setCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=19CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=yCONFIG_ARCH_USES_NUMA_PROT_NONE=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_NUMA_BALANCING=yCONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not setCONFIG_CGROUP_PERF=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=yCONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EXPERT is not setCONFIG_HAVE_UID16=yCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=mCONFIG_OPROFILE_EVENT_MULTIPLEX=yCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=yCONFIG_OPTPROBES=yCONFIG_UPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=yCONFIG_ARCH_WANT_OLD_COMPAT_IPC=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_GENERIC_SIGALTSTACK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_CFQ_GROUP_IOSCHED=yCONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="deadline"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not setCONFIG_X86_UV=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_XEN=yCONFIG_XEN_DOM0=yCONFIG_XEN_PRIVILEGED_GUEST=yCONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_MAXSMP=yCONFIG_NR_CPUS=4096CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=m CONFIG_X86_THERMAL_VECTOR=yCONFIG_I8K=mCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=yCONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=yCONFIG_EFI=yCONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM_RUNTIME=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_PROC_EVENT is not setCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_I2C=mCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=yCONFIG_ACPI_CUSTOM_METHOD=m
# CONFIG_ACPI_BGRT is not setCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not setCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers # CONFIG_X86_PCC_CPUFREQ=m CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not setCONFIG_HT_IRQ=yCONFIG_PCI_ATS=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=yCONFIG_PCI_IOAPIC=yCONFIG_PCI_LABEL=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=m
# CONFIG_I82092 is not setCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not setCONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=yCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_KEYS_COMPAT=yCONFIG_HAVE_TEXT_POKE_SMP=yCONFIG_X86_DEV_DMA_OPS=yCONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not setCONFIG_UNIX=yCONFIG_UNIX_DIAG=mCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not setCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_ACCT=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not setCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CT_PROTO_DCCP=mCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=mCONFIG_NF_CT_PROTO_UDPLITE=mCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not setCONFIG_NF_CT_NETLINK_HELPER=mCONFIG_NETFILTER_NETLINK_QUEUE_CT=yCONFIG_NETFILTER_TPROXY=mCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=mCONFIG_NETFILTER_XT_TARGET_LED=mCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_NFACCT=mCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=mCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#CONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not setCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not setCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV6=mCONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=m
# CONFIG_NF_NAT_IPV6 is not setCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=mCONFIG_BRIDGE_EBT_NFLOG=mCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not setCONFIG_IP_SCTP=mCONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not setCONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not setCONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not setCONFIG_RDS=mCONFIG_RDS_RDMA=mCONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not setCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not setCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_GARP=mCONFIG_BRIDGE=mCONFIG_BRIDGE_IGMP_SNOOPING=yCONFIG_HAVE_NET_DSA=yCONFIG_NET_DSA=mCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=yCONFIG_NET_DSA_TAG_TRAILER=yCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not setCONFIG_IEEE802154=mCONFIG_IEEE802154_6LOWPAN=mCONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=mCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=mCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_EMATCH_IPSET=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=mCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=mCONFIG_BATMAN_ADV=mCONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_DEBUG is not setCONFIG_OPENVSWITCH=mCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=yCONFIG_NETPRIO_CGROUP=mCONFIG_BQL=yCONFIG_BPF_JIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not setCONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not setCONFIG_BT=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIUART_3WIRE=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=mCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_MRVL_SDIO=mCONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_WEXT=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_MINSTREL_HT=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not setCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=yCONFIG_NET_9P=mCONFIG_NET_9P_VIRTIO=mCONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not setCONFIG_NFC=mCONFIG_NFC_NCI=mCONFIG_NFC_HCI=mCONFIG_NFC_SHDLC=yCONFIG_NFC_LLCP=y
#
# Near Field Communication (NFC) devices
#CONFIG_PN544_HCI_NFC=mCONFIG_NFC_PN533=mCONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not setCONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_REGMAP=yCONFIG_REGMAP_I2C=mCONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=m
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not setCONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not setCONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_BLK_CPQ_DA is not setCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_NVME=mCONFIG_BLK_DEV_OSD=mCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not setCONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not setCONFIG_SGI_IOC4=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_SGI_XP=mCONFIG_HP_ILO=mCONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not setCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not setCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not setCONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=mCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=mCONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#CONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=mCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=mCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_ISCSI_BOOT_SYSFS=mCONFIG_SCSI_CXGB3_ISCSI=mCONFIG_SCSI_CXGB4_ISCSI=mCONFIG_SCSI_BNX2_ISCSI=mCONFIG_SCSI_BNX2X_FCOE=mCONFIG_BE2ISCSI=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_HPSA=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not setCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=4CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not setCONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not setCONFIG_SCSI_MVSAS_TASKLET=yCONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not setCONFIG_SCSI_ARCMSR=mCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=m
# CONFIG_MEGARAID_MAILBOX is not set
# CONFIG_MEGARAID_LEGACY is not setCONFIG_MEGARAID_SAS=mCONFIG_SCSI_MPT2SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not setCONFIG_SCSI_UFSHCD=mCONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not setCONFIG_VMWARE_PVSCSI=mCONFIG_HYPERV_STORAGE=mCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_FCOE=mCONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not setCONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not setCONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not setCONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not setCONFIG_SCSI_QLA_FC=mCONFIG_TCM_QLA2XXX=mCONFIG_SCSI_QLA_ISCSI=mCONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not setCONFIG_SCSI_DEBUG=mCONFIG_SCSI_PMCRAID=mCONFIG_SCSI_PM8001=mCONFIG_SCSI_SRP=mCONFIG_SCSI_BFA_FC=mCONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=yCONFIG_SCSI_OSD_INITIATOR=mCONFIG_SCSI_OSD_ULD=mCONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not setCONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=mCONFIG_SATA_AHCI_PLATFORM=mCONFIG_SATA_INIC162X=mCONFIG_SATA_ACARD_AHCI=mCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_SX4=mCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=m
# CONFIG_SATA_HIGHBANK is not setCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_SVW=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARASAN_CF=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_ATP867X=mCONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not setCONFIG_PATA_CS5536=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not setCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_IT8213=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_MARVELL=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not setCONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PDC2027X=mCONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not setCONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not setCONFIG_PATA_SCH=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not setCONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not setCONFIG_PATA_PCMCIA=m
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#CONFIG_PATA_ACPI=mCONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
# CONFIG_MD_MULTIPATH is not setCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_BUFIO=mCONFIG_DM_BIO_PRISON=mCONFIG_DM_PERSISTENT_DATA=mCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not setCONFIG_DM_MIRROR=mCONFIG_DM_RAID=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_QL=mCONFIG_DM_MULTIPATH_ST=mCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=mCONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_LOOPBACK_TARGET=mCONFIG_TCM_FC=mCONFIG_ISCSI_TARGET=mCONFIG_SBP_TARGET=mCONFIG_FUSION=yCONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=mCONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_NET_CORE=yCONFIG_BONDING=mCONFIG_DUMMY=m
# CONFIG_EQUALIZER is not setCONFIG_NET_FC=yCONFIG_MII=mCONFIG_IFB=mCONFIG_NET_TEAM=mCONFIG_NET_TEAM_MODE_BROADCAST=mCONFIG_NET_TEAM_MODE_ROUNDROBIN=mCONFIG_NET_TEAM_MODE_ACTIVEBACKUP=mCONFIG_NET_TEAM_MODE_LOADBALANCE=mCONFIG_MACVLAN=mCONFIG_MACVTAP=m
# CONFIG_VXLAN is not setCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_TUN=mCONFIG_VETH=mCONFIG_VIRTIO_NET=mCONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not setCONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#CONFIG_NET_DSA_MV88E6XXX=mCONFIG_NET_DSA_MV88E6060=mCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=mCONFIG_NET_DSA_MV88E6123_61_65=mCONFIG_ETHERNET=yCONFIG_MDIO=mCONFIG_NET_VENDOR_3COM=yCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_3C589=mCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_NET_VENDOR_ADAPTEC=yCONFIG_ADAPTEC_STARFIRE=mCONFIG_NET_VENDOR_ALTEON=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_NET_VENDOR_AMD=yCONFIG_AMD8111_ETH=mCONFIG_PCNET32=mCONFIG_PCMCIA_NMCLAN=mCONFIG_NET_VENDOR_ATHEROS=yCONFIG_ATL2=mCONFIG_ATL1=mCONFIG_ATL1E=mCONFIG_ATL1C=mCONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not setCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_BNX2=mCONFIG_CNIC=mCONFIG_TIGON3=mCONFIG_BNX2X=mCONFIG_NET_VENDOR_BROCADE=yCONFIG_BNA=mCONFIG_NET_CALXEDA_XGMAC=mCONFIG_NET_VENDOR_CHELSIO=yCONFIG_CHELSIO_T1=mCONFIG_CHELSIO_T1_1G=yCONFIG_CHELSIO_T3=mCONFIG_CHELSIO_T4=mCONFIG_CHELSIO_T4VF=mCONFIG_NET_VENDOR_CISCO=yCONFIG_ENIC=mCONFIG_DNET=mCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not setCONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_NET_VENDOR_DLINK=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not setCONFIG_DL2K=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=mCONFIG_NET_VENDOR_EXAR=yCONFIG_S2IO=mCONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not setCONFIG_NET_VENDOR_INTEL=yCONFIG_E100=mCONFIG_E1000=mCONFIG_E1000E=mCONFIG_IGB=mCONFIG_IGB_DCA=yCONFIG_IGBVF=mCONFIG_IXGB=mCONFIG_IXGBE=mCONFIG_IXGBE_HWMON=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=yCONFIG_IXGBEVF=m
# CONFIG_NET_VENDOR_I825XX is not setCONFIG_IP1000=mCONFIG_JME=mCONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not setCONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not setCONFIG_SKGE_GENESIS=yCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not setCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=mCONFIG_MLX4_EN_DCB=yCONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=yCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not setCONFIG_KSZ884X_PCI=mCONFIG_NET_VENDOR_MYRI=yCONFIG_MYRI10GE=mCONFIG_MYRI10GE_DCA=yCONFIG_FEALNX=mCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NATSEMI=mCONFIG_NS83820=mCONFIG_NET_VENDOR_8390=yCONFIG_PCMCIA_AXNET=mCONFIG_NE2K_PCI=mCONFIG_PCMCIA_PCNET=mCONFIG_NET_VENDOR_NVIDIA=yCONFIG_FORCEDETH=mCONFIG_NET_VENDOR_OKI=yCONFIG_PCH_GBE=mCONFIG_ETHOC=mCONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=mCONFIG_QLCNIC=mCONFIG_QLGE=mCONFIG_NETXEN_NIC=mCONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not setCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_R8169=mCONFIG_NET_VENDOR_RDC=yCONFIG_R6040=m
# CONFIG_NET_VENDOR_SEEQ is not setCONFIG_NET_VENDOR_SILAN=yCONFIG_SC92031=mCONFIG_NET_VENDOR_SIS=yCONFIG_SIS900=mCONFIG_SIS190=mCONFIG_SFC=m
# CONFIG_SFC_MTD is not setCONFIG_SFC_MCDI_MON=yCONFIG_SFC_SRIOV=yCONFIG_NET_VENDOR_SMSC=yCONFIG_PCMCIA_SMC91C92=mCONFIG_EPIC100=mCONFIG_SMSC9420=mCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not setCONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not setCONFIG_NET_VENDOR_SUN=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NIU=mCONFIG_NET_VENDOR_TEHUTI=yCONFIG_TEHUTI=mCONFIG_NET_VENDOR_TI=yCONFIG_TLAN=mCONFIG_NET_VENDOR_VIA=yCONFIG_VIA_RHINE=mCONFIG_VIA_RHINE_MMIO=yCONFIG_VIA_VELOCITY=mCONFIG_NET_VENDOR_WIZNET=yCONFIG_WIZNET_W5100=mCONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not setCONFIG_WIZNET_BUS_ANY=yCONFIG_NET_VENDOR_XIRCOM=yCONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not setCONFIG_AMD_PHY=mCONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_BCM87XX_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=mCONFIG_NATIONAL_PHY=mCONFIG_STE10XP=mCONFIG_LSI_ET1011C_PHY=mCONFIG_MICREL_PHY=mCONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=m
# CONFIG_PLIP is not setCONFIG_PPP=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=mCONFIG_PPP_MULTILINK=yCONFIG_PPPOATM=mCONFIG_PPPOE=mCONFIG_PPTP=mCONFIG_PPPOL2TP=mCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_SLIP=mCONFIG_SLHC=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_CDC_EEM=mCONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_CDC_MBIM is not setCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_SMSC75XX=mCONFIG_USB_NET_SMSC95XX=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_NET_CX82310_ETH=mCONFIG_USB_NET_KALMIA=mCONFIG_USB_NET_QMI_WWAN=mCONFIG_USB_HSO=mCONFIG_USB_NET_INT51X1=mCONFIG_USB_IPHETH=mCONFIG_USB_SIERRA_NET=mCONFIG_USB_VL600=mCONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not setCONFIG_AT76C50X_USB=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not setCONFIG_USB_NET_RNDIS_WLAN=mCONFIG_RTL8180=mCONFIG_RTL8187=mCONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not setCONFIG_MAC80211_HWSIM=mCONFIG_MWL8K=m
# CONFIG_ATH_CARDS is not setCONFIG_B43=mCONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not setCONFIG_B43_SSB=yCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_PCMCIA=yCONFIG_B43_SDIO=yCONFIG_B43_BCMA_PIO=yCONFIG_B43_PIO=yCONFIG_B43_PHY_N=yCONFIG_B43_PHY_LP=yCONFIG_B43_PHY_HT=yCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not setCONFIG_B43LEGACY=mCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not setCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not setCONFIG_BRCMUTIL=mCONFIG_BRCMSMAC=mCONFIG_BRCMFMAC=mCONFIG_BRCMFMAC_SDIO=yCONFIG_BRCMFMAC_SDIO_OOB=yCONFIG_BRCMFMAC_USB=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not setCONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not setCONFIG_IWLWIFI=mCONFIG_IWLDVM=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLWIFI_P2P is not setCONFIG_IWLEGACY=mCONFIG_IWL4965=mCONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options # CONFIG_IWLEGACY_DEBUG=y CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_CS=m CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y # CONFIG_HERMES is not set CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m CONFIG_RT2800PCI=m CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2800PCI_RT3290=y CONFIG_RT2500USB=m CONFIG_RT73USB=m # CONFIG_RT2800USB is not set CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set CONFIG_RTL8192CE=m CONFIG_RTL8192SE=m CONFIG_RTL8192DE=m # CONFIG_RTL8723AE is not set CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m # CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192C_COMMON=m # CONFIG_WL_TI is not set CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m CONFIG_MWIFIEX_USB=m
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=mCONFIG_WIMAX_I2400M_USB=mCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8CONFIG_WAN=y
# CONFIG_LANMEDIA is not setCONFIG_HDLC=mCONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not setCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8
# CONFIG_SBNI is not setCONFIG_IEEE802154_DRIVERS=mCONFIG_IEEE802154_FAKEHARD=mCONFIG_IEEE802154_FAKELB=mCONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not setCONFIG_VMXNET3=mCONFIG_HYPERV_NET=mCONFIG_ISDN=yCONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not setCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=yCONFIG_HISAX_NO_SENDCOMPLETE=yCONFIG_HISAX_NO_LLC=yCONFIG_HISAX_NO_KEYPAD=yCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#CONFIG_HISAX_SEDLBAUER_CS=mCONFIG_HISAX_ELSA_CS=mCONFIG_HISAX_AVM_A1_CS=mCONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not setCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not setCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not setCONFIG_ISDN_DRV_GIGASET=mCONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not setCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=mCONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not setCONFIG_HYSDN=mCONFIG_HYSDN_CAPI=yCONFIG_MISDN=mCONFIG_MISDN_DSP=mCONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=mCONFIG_MISDN_HFCMULTI=mCONFIG_MISDN_HFCUSB=mCONFIG_MISDN_AVMFRITZ=mCONFIG_MISDN_SPEEDFAX=mCONFIG_MISDN_INFINEON=mCONFIG_MISDN_W6692=mCONFIG_MISDN_NETJET=mCONFIG_MISDN_IPAC=mCONFIG_MISDN_ISAR=mCONFIG_ISDN_HDLC=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=mCONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_VSXXXAA=mCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_HANWANG=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not setCONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not setCONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not setCONFIG_TOUCHSCREEN_EETI=mCONFIG_TOUCHSCREEN_FUJITSU=mCONFIG_TOUCHSCREEN_ILI210X=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_WACOM_W8001=mCONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not setCONFIG_TOUCHSCREEN_MCS5000=mCONFIG_TOUCHSCREEN_MMS114=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not setCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_EDT_FT5X06=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WM97XX is not setCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=yCONFIG_TOUCHSCREEN_USB_ETT_TC45USB=yCONFIG_TOUCHSCREEN_USB_NEXIO=yCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=mCONFIG_TOUCHSCREEN_TSC_SERIO=mCONFIG_TOUCHSCREEN_TSC2007=mCONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not setCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not setCONFIG_INPUT_APANEL=mCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_CM109=mCONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not setCONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_NOZOMI=m
# CONFIG_ISI is not setCONFIG_N_HDLC=mCONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MFD_HSU is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=yCONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=yCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=mCONFIG_HW_RANDOM_TPM=yCONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not setCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HPET=y
# CONFIG_HPET_MMAP is not setCONFIG_HANGCHECK_TIMER=mCONFIG_UV_MMTIMER=mCONFIG_TCG_TPM=yCONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_INFINEON is not setCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=mCONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=mCONFIG_DP83640_PHY=mCONFIG_PTP_1588_CLOCK_PCH=mCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not setCONFIG_CHARGER_SMB347=m
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not setCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_ASC7621=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_G760A=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_HIH6130 is not setCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not setCONFIG_SENSORS_LINEAGE=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=mCONFIG_SENSORS_LTC4245=mCONFIG_SENSORS_LTC4261=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not setCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MCP3021=mCONFIG_SENSORS_NTC_THERMISTOR=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=mCONFIG_SENSORS_ADM1275=mCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=mCONFIG_SENSORS_MAX16064=mCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=mCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=mCONFIG_SENSORS_ZL6100=mCONFIG_SENSORS_SHT21=mCONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMM665 is not setCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not setCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=mCONFIG_SENSORS_ADS1015=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA2XX=mCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=mCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=mCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_FAIR_SHARE is not set CONFIG_STEP_WISE=y
# CONFIG_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set CONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_F71808E_WDT=mCONFIG_SP5100_TCO=m
# CONFIG_SC520_WDT is not setCONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not setCONFIG_IB700_WDT=mCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=mCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not setCONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not setCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=mCONFIG_W83697UG_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not setCONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_BLOCKIO=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#CONFIG_BCMA=mCONFIG_BCMA_BLOCKIO=yCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=mCONFIG_MFD_SM501=m
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not setCONFIG_LPC_SCH=mCONFIG_LPC_ICH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not setCONFIG_MFD_VX855=m
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_REGULATOR is not setCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=yCONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not setCONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_DVB_CORE=mCONFIG_DVB_NET=yCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#CONFIG_RC_CORE=mCONFIG_RC_MAP=mCONFIG_RC_DECODERS=yCONFIG_LIRC=mCONFIG_IR_LIRC_CODEC=mCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_SONY_DECODER=mCONFIG_IR_RC5_SZ_DECODER=mCONFIG_IR_SANYO_DECODER=mCONFIG_IR_MCE_KBD_DECODER=mCONFIG_RC_DEVICES=yCONFIG_RC_ATI_REMOTE=mCONFIG_IR_ENE=mCONFIG_IR_IMON=mCONFIG_IR_MCEUSB=mCONFIG_IR_ITE_CIR=mCONFIG_IR_FINTEK=mCONFIG_IR_NUVOTON=mCONFIG_IR_REDRAT3=mCONFIG_IR_STREAMZAP=mCONFIG_IR_WINBOND_CIR=mCONFIG_IR_IGUANA=m
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not setCONFIG_IR_GPIO_CIR=m
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#CONFIG_SMS_SDIO_DRV=m
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
# CONFIG_RADIO_ADAPTERS is not set
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_INPUT=yCONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options # CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends) #CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# MPEG video encoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#CONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_XC4000=mCONFIG_MEDIA_TUNER_MC44S803=m
#
# Multistandard (satellite) frontends
#
#
# Multistandard (cable + terrestrial) frontends
#
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
#
# SEC control devices for DVB-S
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=yCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=64CONFIG_VGA_SWITCHEROO=yCONFIG_DRM=mCONFIG_DRM_USB=mCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_LOAD_EDID_FIRMWARE=yCONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=mCONFIG_DRM_RADEON_KMS=yCONFIG_DRM_NOUVEAU=mCONFIG_NOUVEAU_DEBUG=5CONFIG_NOUVEAU_DEBUG_DEFAULT=3CONFIG_DRM_NOUVEAU_BACKLIGHT=y
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=mCONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I810 is not setCONFIG_DRM_I915=mCONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not setCONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not setCONFIG_DRM_GMA500=m
# CONFIG_DRM_GMA600 is not setCONFIG_DRM_GMA3600=yCONFIG_DRM_UDL=mCONFIG_DRM_AST=mCONFIG_DRM_MGAG200=mCONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not setCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not setCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not setCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not setCONFIG_FB_VIRTUAL=mCONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not setCONFIG_BACKLIGHT_LP855X=m
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not setCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not setCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=yCONFIG_SND_KCTL_JACK=yCONFIG_SND_DMA_SGBUF=yCONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not setCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_MPU401_UART=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_PCSP=mCONFIG_SND_DUMMY=mCONFIG_SND_ALOOP=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not setCONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not setCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0CONFIG_SND_SB_COMMON=mCONFIG_SND_SB16_DSP=mCONFIG_SND_TEA575X=mCONFIG_SND_PCI=yCONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not setCONFIG_SND_ALI5451=mCONFIG_SND_ASIHPI=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not setCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not setCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not setCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS5530=mCONFIG_SND_CS5535AUDIO=mCONFIG_SND_CTXFI=mCONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=mCONFIG_SND_INDIGOIOX=mCONFIG_SND_INDIGODJX=mCONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not setCONFIG_SND_ES1968=mCONFIG_SND_ES1968_INPUT=yCONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not setCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDA_PREALLOC_SIZE=512CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not setCONFIG_SND_HDA_INPUT_BEEP=yCONFIG_SND_HDA_INPUT_BEEP_MODE=0CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not setCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_HDMI=yCONFIG_SND_HDA_CODEC_CIRRUS=yCONFIG_SND_HDA_CODEC_CONEXANT=yCONFIG_SND_HDA_CODEC_CA0110=yCONFIG_SND_HDA_CODEC_CA0132=yCONFIG_SND_HDA_CODEC_CMEDIA=yCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0CONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=mCONFIG_SND_LOLA=mCONFIG_SND_LX6464ES=mCONFIG_SND_MAESTRO3=mCONFIG_SND_MAESTRO3_INPUT=yCONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not setCONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not setCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=mCONFIG_SND_VIA82XX_MODEM=mCONFIG_SND_VIRTUOSO=mCONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not setCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_UA101=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=yCONFIG_SND_USB_US122L=mCONFIG_SND_USB_6FIRE=mCONFIG_SND_FIREWIRE=yCONFIG_SND_FIREWIRE_LIB=mCONFIG_SND_FIREWIRE_SPEAKERS=mCONFIG_SND_ISIGHT=m
# CONFIG_SND_SCS1X is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=m
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=yCONFIG_UHID=mCONFIG_HID_GENERIC=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not setCONFIG_HID_APPLE=yCONFIG_HID_AUREAL=mCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_PRODIKEYS=mCONFIG_HID_CYPRESS=yCONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not setCONFIG_HID_EMS_FF=mCONFIG_HID_ELECOM=mCONFIG_HID_EZKEY=yCONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not setCONFIG_HID_KEYTOUCH=mCONFIG_HID_KYE=mCONFIG_HID_UCLOGIC=mCONFIG_HID_WALTOP=mCONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not setCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=yCONFIG_HID_LCPOWER=mCONFIG_HID_LENOVO_TPKBD=mCONFIG_HID_LOGITECH=yCONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not setCONFIG_LOGIWHEELS_FF=yCONFIG_HID_MAGICMOUSE=mCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_MULTITOUCH=mCONFIG_HID_NTRIG=yCONFIG_HID_ORTEK=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=mCONFIG_HID_PICOLCD=mCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=yCONFIG_HID_PICOLCD_LCD=yCONFIG_HID_PICOLCD_LEDS=yCONFIG_HID_PICOLCD_CIR=yCONFIG_HID_PRIMAX=m
# CONFIG_HID_PS3REMOTE is not setCONFIG_HID_ROCCAT=mCONFIG_HID_SAITEK=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=mCONFIG_HID_SPEEDLINK=mCONFIG_HID_SUNPLUS=mCONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_HYPERV_MOUSE=mCONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not setCONFIG_HID_TIVO=mCONFIG_HID_TOPSEED=mCONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not setCONFIG_HID_WACOM=mCONFIG_HID_WIIMOTE=mCONFIG_HID_WIIMOTE_EXT=yCONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not setCONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not setCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB_ARCH_HAS_XHCI=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not setCONFIG_USB_MON=yCONFIG_USB_WUSB=mCONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_PCI=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not setCONFIG_USB_ISP1362_HCD=mCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not setCONFIG_USB_WHCI_HCD=mCONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=mCONFIG_USB_WDM=mCONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB port drivers
#CONFIG_USB_USS720=mCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP210X=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not setCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not setCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7715_PARPORT=yCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_QCAUX=mCONFIG_USB_SERIAL_QUALCOMM=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_SIEMENS_MPI=mCONFIG_USB_SERIAL_SIERRAWIRELESS=mCONFIG_USB_SERIAL_SYMBOL=mCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_WWAN=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_SERIAL_OPTICON=mCONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_ZTE is not setCONFIG_USB_SERIAL_SSU100=mCONFIG_USB_SERIAL_QT2=mCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not setCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not setCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=mCONFIG_USB_YUREX=mCONFIG_USB_EZUSB_FX2=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not setCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_NOP_USB_XCEIV=mCONFIG_UWB=mCONFIG_UWB_HWA=mCONFIG_UWB_WHCI=mCONFIG_UWB_I1480U=mCONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_MINORS=8CONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not setCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not setCONFIG_MMC_TIFM_SD=mCONFIG_MMC_SDRICOH_CS=mCONFIG_MMC_CB710=mCONFIG_MMC_VIA_SDMMC=mCONFIG_MMC_VUB300=mCONFIG_MMC_USHC=mCONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=mCONFIG_MEMSTICK_JMICRON_38X=mCONFIG_MEMSTICK_R592=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_LP3944=mCONFIG_LEDS_LP5521=mCONFIG_LEDS_LP5523=mCONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_INTEL_SS4200=mCONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not setCONFIG_LEDS_BLINKM=mCONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=mCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not setCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_QIB=m # CONFIG_INFINIBAND_AMSO1100 is not set CONFIG_INFINIBAND_CXGB3=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_INFINIBAND_CXGB4=m CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_NES=m # CONFIG_INFINIBAND_NES_DEBUG is not set # CONFIG_INFINIBAND_OCRDMA is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not setCONFIG_EDAC_E752X=mCONFIG_EDAC_I82975X=mCONFIG_EDAC_I3000=mCONFIG_EDAC_I3200=mCONFIG_EDAC_X38=mCONFIG_EDAC_I5400=mCONFIG_EDAC_I7CORE=mCONFIG_EDAC_I5000=mCONFIG_EDAC_I5100=mCONFIG_EDAC_I7300=mCONFIG_EDAC_SBRIDGE=mCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_DS3232=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_ISL12022=mCONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not setCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=mCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=mCONFIG_RTC_DRV_EM3027=mCONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=mCONFIG_RTC_DRV_RP5C01=mCONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not setCONFIG_INTEL_IOATDMA=m
# CONFIG_TIMB_DMA is not setCONFIG_PCH_DMA=mCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=yCONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not setCONFIG_DCA=mCONFIG_AUXDISPLAY=yCONFIG_KS0108=mCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2CONFIG_CFAG12864B=mCONFIG_CFAG12864B_RATE=20CONFIG_UIO=mCONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not setCONFIG_UIO_AEC=mCONFIG_UIO_SERCOS3=mCONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_VFIO is not setCONFIG_VIRTIO=y
#
# Virtio drivers
#CONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_BALLOON=mCONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#CONFIG_HYPERV=mCONFIG_HYPERV_UTILS=m
# CONFIG_HYPERV_BALLOON is not set
#
# Xen driver support
#CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not setCONFIG_XEN_SCRUB_PAGES=yCONFIG_XEN_DEV_EVTCHN=mCONFIG_XEN_BACKEND=yCONFIG_XENFS=mCONFIG_XEN_COMPAT_XENFS=yCONFIG_XEN_SYS_HYPERVISOR=yCONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not setCONFIG_SWIOTLB_XEN=yCONFIG_XEN_TMEM=yCONFIG_XEN_PCIDEV_BACKEND=mCONFIG_XEN_PRIVCMD=mCONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not setCONFIG_XEN_HAVE_PVMMU=yCONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not setCONFIG_R8712U=m
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not setCONFIG_CRYSTALHD=m
# CONFIG_CXT1E1 is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_SBE_2T3E3 is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_SOLO6X10 is not set CONFIG_LIRC_STAGING=yCONFIG_LIRC_BT829=m CONFIG_LIRC_IGORPLUGUSB=m CONFIG_LIRC_IMON=mCONFIG_LIRC_PARALLEL=mCONFIG_LIRC_SASEM=mCONFIG_LIRC_SERIAL=m CONFIG_LIRC_SERIAL_TRANSMITTER=y CONFIG_LIRC_SIR=mCONFIG_LIRC_ZILOG=m
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CSR_WIFI is not set
# CONFIG_ZCACHE2 is not setCONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_SB105X is not set
# CONFIG_FIREWIRE_SERIAL is not setCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACER_WMI=mCONFIG_ACERHDF=mCONFIG_ASUS_LAPTOP=mCONFIG_DELL_LAPTOP=mCONFIG_DELL_WMI=mCONFIG_DELL_WMI_AIO=mCONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not setCONFIG_FUJITSU_TABLET=mCONFIG_AMILO_RFKILL=mCONFIG_HP_ACCEL=mCONFIG_HP_WMI=mCONFIG_MSI_LAPTOP=mCONFIG_PANASONIC_LAPTOP=mCONFIG_COMPAL_LAPTOP=mCONFIG_SONY_LAPTOP=mCONFIG_SONYPI_COMPAT=yCONFIG_IDEAPAD_LAPTOP=mCONFIG_THINKPAD_ACPI=mCONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not setCONFIG_THINKPAD_ACPI_VIDEO=yCONFIG_THINKPAD_ACPI_HOTKEY_POLL=yCONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not setCONFIG_EEEPC_LAPTOP=mCONFIG_ASUS_WMI=mCONFIG_ASUS_NB_WMI=mCONFIG_EEEPC_WMI=mCONFIG_ACPI_WMI=mCONFIG_MSI_WMI=mCONFIG_TOPSTAR_LAPTOP=mCONFIG_ACPI_TOSHIBA=mCONFIG_TOSHIBA_BT_RFKILL=mCONFIG_ACPI_CMPC=mCONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not setCONFIG_SAMSUNG_LAPTOP=mCONFIG_MXM_WMI=mCONFIG_INTEL_OAKTRAIL=mCONFIG_SAMSUNG_Q10=mCONFIG_APPLE_GMUX=m
#
# Hardware Spinlock drivers
#CONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=yCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=yCONFIG_AMD_IOMMU=yCONFIG_AMD_IOMMU_STATS=yCONFIG_AMD_IOMMU_V2=mCONFIG_DMAR_TABLE=yCONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not setCONFIG_INTEL_IOMMU_FLOPPY_WA=yCONFIG_IRQ_REMAP=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=yCONFIG_DELL_RBU=mCONFIG_DCDBAS=mCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not setCONFIG_EXT4_FS=yCONFIG_EXT4_USE_FOR_EXT23=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not setCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_NILFS2_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=yCONFIG_FANOTIFY_ACCESS_PERMISSIONS=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_QUOTACTL_COMPAT=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=mCONFIG_CUSE=mCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=mCONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not setCONFIG_FSCACHE_OBJECT_LIST=yCONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=mCONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=yCONFIG_SQUASHFS_LZO=yCONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_F2FS_FS is not setCONFIG_ORE=mCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V2=mCONFIG_NFS_V3=mCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=yCONFIG_PNFS_FILE_LAYOUT=mCONFIG_PNFS_BLOCK=mCONFIG_PNFS_OBJLAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=yCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=yCONFIG_CIFS_ACL=yCONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=mCONFIG_NLS_UTF8=mCONFIG_DLM=mCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_LOCKUP_DETECTOR=yCONFIG_HARDLOCKUP_DETECTOR=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not setCONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not setCONFIG_SPARSE_RCU_POINTER=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not setCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not setCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_LATENCYTOP=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_FENTRY=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACER_MAX_TRACE=yCONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_EVENT_POWER_TRACING_DEPRECATED=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_STACK_TRACER=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_KPROBE_EVENT=yCONFIG_UPROBE_EVENT=yCONFIG_PROBE_EVENTS=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not setCONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not setCONFIG_BUILD_DOCSRC=yCONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_ATOMIC64_SELFTEST=yCONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=yCONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not setCONFIG_KGDB_LOW_LEVEL_TRAP=yCONFIG_KGDB_KDB=yCONFIG_KDB_KEYBOARD=yCONFIG_HAVE_ARCH_KMEMCHECK=yCONFIG_TEST_KSTRTOX=yCONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=yCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not setCONFIG_DEBUG_SET_MODULE_RONX=yCONFIG_DEBUG_NX_TEST=m
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_X86_DECODER_SELFTEST=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_TRUSTED_KEYS=mCONFIG_ENCRYPTED_KEYS=m CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set CONFIG_INTEL_TXT=y CONFIG_LSM_MMAP_MIN_ADDR=65535 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set CONFIG_INTEGRITY=yCONFIG_INTEGRITY_SIGNATURE=yCONFIG_IMA=yCONFIG_IMA_MEASURE_PCR_IDX=10CONFIG_IMA_AUDIT=yCONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_APPRAISE is not set CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_ASYNC_PQ=mCONFIG_ASYNC_RAID6_RECOV=m CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_PCOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not setCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_PCRYPT=mCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=mCONFIG_CRYPTO_TEST=mCONFIG_CRYPTO_ABLK_HELPER_X86=yCONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_VMAC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_X86_64=yCONFIG_CRYPTO_CRC32C_INTEL=mCONFIG_CRYPTO_GHASH=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA1_SSSE3=mCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_BLOWFISH_X86_64=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAMELLIA_X86_64=m
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set CONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_X86_64=m CONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m CONFIG_CRYPTO_SERPENT_AVX_X86_64=m CONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_X86_64=m CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_ZLIB=mCONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=mCONFIG_CRYPTO_USER_API=yCONFIG_CRYPTO_USER_API_HASH=yCONFIG_CRYPTO_USER_API_SKCIPHER=yCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_APIC_ARCHITECTURE=yCONFIG_KVM_MMIO=yCONFIG_KVM_ASYNC_PF=yCONFIG_HAVE_KVM_MSI=yCONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_MMU_AUDIT=yCONFIG_VHOST_NET=m
# CONFIG_TCM_VHOST is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=mCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_PERCPU_RWSEM=yCONFIG_CRC_CCITT=mCONFIG_CRC16=yCONFIG_CRC_T10DIF=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_CRC8=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=yCONFIG_XZ_DEC_ARM=yCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=yCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_XZ=yCONFIG_DECOMPRESS_LZO=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_REED_SOLOMON=mCONFIG_REED_SOLOMON_ENC8=yCONFIG_REED_SOLOMON_DEC8=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_BTREE=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_NLATTR=yCONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=yCONFIG_AVERAGE=yCONFIG_CLZ_TAB=yCONFIG_CORDIC=m
# CONFIG_DDR is not setCONFIG_MPILIB=yCONFIG_SIGNATURE=y
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 43 lines · Zhouping Liu
Hello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under some pressure
condition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---
Quoted 1 line
I attached the config file, hope it can make some help.
Hey Zhouping,
Can you please run with the following commit reverted?
Hillf
commit cda73a10eb3f
mm: do not sleep in balance_pgdat if there's no i/o congestion
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 45 lines · Hillf Danton
Quoted 43 lines · Zhouping Liu
Hello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under some pressure
condition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---Quoted 1 line
I attached the config file, hope it can make some help.
Quoted 8 lines
Hey Zhouping,
Can you please run with the following commit reverted?
Hillf
commit
cda73a10eb3f
mm: do not sleep inbalance_pgdatif there's no i/o congestion
Hello Hillf,
Tested it with cda73a10eb3f reverted on two machines, no such issue occurred again.
Thanks,
Zhouping
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 77 lines · Zhouping Liu
Quoted 76 lines · Hillf Danton
Quoted 66 lines · Zhouping Liu
Hello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under
some pressurecondition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---Quoted 1 line
I attached the config file, hope it can make some help.
Hey Zhouping,
Can you please run with the following commit reverted?
Hillf
Quoted 8 lines
Quoted 2 lines
commit
cda73a10eb3f
mm: do not sleep inbalance_pgdatif there's no i/o congestionHello Hillf,
Tested it with
cda73a10eb3freverted on two machines, no such issue occurred again.
It is really good news;) thank you a ton for testing.
Hillf
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zhouping LiuQuoted 43 lines · Zhouping Liu
Hello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under some pressure
condition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---
Quoted 5 lines
I attached the config file, hope it can make some help.
Thanks,
Zhouping
If I'm decoding it properly, this translates to:
0xffffffff811542e9 is in wait_iff_congested (/usr/src/linux/arch/x86/include/asm/bitops.h:321).
316 }
317
318 static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
319 {
320 return ((1UL << (nr % BITS_PER_LONG)) &
321 (addr[nr / BITS_PER_LONG])) != 0;
322 }
323
324 static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
325 {
0xffffffff811542e8 is in wait_iff_congested (mm/backing-dev.c:815).
810 /*
811 * If there is no congestion, or heavy congestion is not being
812 * encountered in the current zone, yield if necessary instead
813 * of sleeping on the congestion queue
814 */
815 if (atomic_read(&nr_bdi_congested[sync]) == 0 ||
816 !zone_is_reclaim_congested(zone)) {
817 cond_resched();
818
819 /* In case we scheduled, work out time remaining */
All code
========
0: 4e 6d rex.WRX insl (%dx),%es:(%rdi)
2: 88 00 mov %al,(%rax)
4: 48 c7 45 b8 00 00 00 movq $0x0,-0x48(%rbp)
b: 00
c: 48 83 c0 18 add $0x18,%rax
10: 48 c7 45 c8 80 60 08 movq $0xffffffff81086080,-0x38(%rbp)
17: 81
18: 48 89 45 d0 mov %rax,-0x30(%rbp) 1c: 48 89 45 d8 mov %rax,-0x28(%rbp) 20: 8b 04 b5 a0 9a cd 81 mov -0x7e326560(,%rsi,4),%eax 27: 85 c0 test %eax,%eax 29: 74 0f je 0x3a 2b:* 48 8b 87 00 05 00 00 mov 0x500(%rdi),%rax <-- trapping instruction 32: a8 04 test $0x4,%al 34: 0f 85 98 00 00 00 jne 0xd2 3a: e8 .byte 0xe8 3b: b3 c3 mov $0xc3,%bl
I remember when I was instrumenting vmscan.c to see which of the congestion_wait() calls was making trouble, the only place that really called it many times (other counters being zero all the time!) was the one that I eventually replaced with wait_iff_congested().
So, I wonder did we now uncover a subtle bug in wait_iff_congested() that has gone unnoticed for a long time?
Signature · 7 lines
Zlatko -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zhouping LiuQuoted 43 lines · Zhouping Liu
Hello everyone,
The latest mainline(637704cbc95c) would trigger the following error when the system was under some pressure
condition(in my testing, I used oom01 case inside LTP test suite to trigger the issue):[ 5462.920151] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500 [ 5462.927991] IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5462.934176] PGD 0 [ 5462.936191] Oops: 0000 [#2] SMP [ 5462.939428] Modules linked in: lockd sunrpc iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tabled [ 5462.984261] CPU 13 [ 5462.986184] Pid: 117, comm: kswapd3 Tainted: G D 3.8.0-rc1+ #1 Dell Inc. PowerEdge M905/0D413F [ 5462.995814] RIP: 0010:[<ffffffff811542d9>] [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.004411] RSP: 0018:ffff88007c97fd48 EFLAGS: 00010202 [ 5463.009701] RAX: 0000000000000001 RBX: 0000000000000064 RCX: 0000000000000001 [ 5463.016818] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 [ 5463.023926] RBP: ffff88007c97fd98 R08: 0000000000000000 R09: ffff88022ffd9d80 [ 5463.031033] R10: 0000000000003189 R11: 0000000000000000 R12: 00000001004ee87e [ 5463.038140] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88022ffd9000 [ 5463.045258] FS: 00007f3e570de740(0000) GS:ffff88022fcc0000(0000) knlGS:0000000000000000 [ 5463.053317] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5463.059041] CR2: 0000000000000500 CR3: 00000000018dc000 CR4: 00000000000007e0 [ 5463.066157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5463.073276] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5463.080400] Process kswapd3 (pid: 117, threadinfo ffff88007c97e000, task ffff88007c981970) [ 5463.088633] Stack: [ 5463.090646] ffff88007c97fd98 0000000000000000 ffff88007c981970 ffffffff81086080 [ 5463.098090] ffff88007c97fd68 ffff88007c97fd68 ffff88022ffd9d80 0000000000000002 [ 5463.105527] 0000000000000002 0000000000000000 ffff88007c97feb8 ffffffff8114b0e3 [ 5463.112998] Call Trace: [ 5463.115446] [<ffffffff81086080>] ? wake_up_bit+0x40/0x40 [ 5463.120826] [<ffffffff8114b0e3>] kswapd+0x6c3/0xa50 [ 5463.125775] [<ffffffff8114aa20>] ? zone_reclaim+0x270/0x270 [ 5463.131415] [<ffffffff81085680>] kthread+0xc0/0xd0 [ 5463.136278] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.142786] [<ffffffff8160a0ac>] ret_from_fork+0x7c/0xb0 [ 5463.148166] [<ffffffff810855c0>] ? kthread_create_on_node+0x120/0x120 [ 5463.154668] Code: 4e 6d 88 00 48 c7 45 b8 00 00 00 00 48 83 c0 18 48 c7 45 c8 80 60 08 81 48 89 45 d0 48 89 45 d8 8b 04 b5 a0 9a cd 81 85 c0 74 0f <48> 8b 87 00 05 00 00 a8 04 0f 85 98 00 00 00 e8 b3 c3 [ 5463.174097] RIP [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 [ 5463.180352] RSP <ffff88007c97fd48> [ 5463.183824] CR2: 0000000000000500 [ 5463.203717] ---[ end trace 9ff4ff9087c13a36 ]---
Quoted 5 lines
I attached the config file, hope it can make some help.
Thanks,
Zhouping
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Thanks,
mm/vmscan.c +12 -5
@@ -2564,6 +2564,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining,static unsigned long balance_pgdat (pg_data_t *pgdat,int order,int *classzone_idx) { +bool pgdat_is_balanced = false;struct zone *unbalanced_zone;int i;int end_zone =0 ;/* Inclusive. 0 = ZONE_DMA */
@@ -2638,8 +2639,11 @@ loop_again:zone_clear_flag (zone,ZONE_CONGESTED ); } } -if (i <0 ) + +if (i <0 ) { + pgdat_is_balanced = true; goto out; + }for (i =0 ; i <= end_zone; i++) {struct zone *zone = pgdat->node_zones + i;
@@ -2766,8 +2770,11 @@ loop_again: pfmemalloc_watermark_ok(pgdat))wake_up (&pgdat->pfmemalloc_wait); -if (pgdat_balanced (pgdat, order, *classzone_idx)) +if (pgdat_balanced (pgdat, order, *classzone_idx)) { + pgdat_is_balanced = true;break ;/* kswapd: all done */ + } +/* * OK, kswapd is getting into trouble. Take a nap, then take * another pass across the zones.
@@ -2775,7 +2782,7 @@ loop_again:if (total_scanned && (sc.priority <DEF_PRIORITY -2 )) {if (has_under_min_watermark_zone)count_vm_event (KSWAPD_SKIP_CONGESTION_WAIT ); -else +else if (unbalanced_zone)wait_iff_congested (unbalanced_zone,BLK_RW_ASYNC ,HZ /10 ); }
@@ -2788,9 +2795,9 @@ loop_again:if (sc.nr_reclaimed >=SWAP_CLUSTER_MAX )break ; }while (--sc.priority >=0 ); -out: -if (!pgdat_balanced (pgdat, order, *classzone_idx)) { +out: +if (!pgdat_is_balanced) {cond_resched ();try_to_freeze ();
Signature · 7 lines
Zlatko -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Hi,
NOTE to everyone debugging this: reproduced quickly with X + firefox + youtube (adobe flash plugin)
Quoted 2 lines
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
I've had probably the same problem (dmesg below) and currently am trying your patch applied to current mainline (101e5c7470eb7f). so far it looks very good. (before: bug after 5-30 minutes, right now 1h and counting)
thanks!
[ 105.164610] ------------[ cut here ]------------ [ 105.164614] kernel BUG at mm/huge_memory.c:1798! [ 105.164617] invalid opcode: 0000 [#1] PREEMPT SMP [ 105.164621] Modules linked in: fuse sha256_generic xt_owner xt_LOG xt_limit xt_recent xt_conntrack xt_multiport iptable_mangle xt_DSCP iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack fbcon font bitblit softcursor fb fbdev hwmon_vid btrfs zlib_deflate zlib_inflate xfs libcrc32c snd_usb_audio uvcvideo snd_usbmidi_lib videobuf2_core snd_rawmidi videobuf2_vmalloc videobuf2_memops hid_kensington iTCO_wdt joydev gpio_ich iTCO_vendor_support raid1 fglrx(PO) coretemp kvm_intel kvm skge acpi_cpufreq lpc_ich serio_raw asus_atk0110 snd_hda_codec_hdmi intel_agp snd_hda_intel mperf intel_gtt processor snd_hda_codec sky2 agpgart snd_hwdep [last unloaded: iTCO_wdt] [ 105.164672] CPU 1 [ 105.164677] Pid: 4091, comm: XPCOM CC Tainted: P O 3.8.0-rc1+ #43 System manufacturer System Product Name/P5B-Deluxe [ 105.164679] RIP: 0010:[<ffffffff81120fb6>] [<ffffffff81120fb6>] __split_huge_page+0x216/0x240 [ 105.164688] RSP: 0018:ffff880091511c48 EFLAGS: 00010297 [ 105.164690] RAX: 0000000000000001 RBX: ffff8800a210c000 RCX: 0000000000000042 [ 105.164692] RDX: 00000000000000cb RSI: 0000000000000046 RDI: ffffffff81b28a20 [ 105.164694] RBP: ffff880091511ca8 R08: 000000000000ffff R09: 0000000000000000 [ 105.164696] R10: 000000000000043d R11: 0000000000000001 R12: ffff8800a2295c60 [ 105.164698] R13: ffffea00021e0000 R14: 0000000000000000 R15: 00000007f5134600 [ 105.164701] FS: 00007f514991e700(0000) GS:ffff8800bfc80000(0000) knlGS:0000000000000000 [ 105.164703] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 105.164705] CR2: 00007f5123bff000 CR3: 000000009531b000 CR4: 00000000000007e0 [ 105.164707] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 105.164709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 105.164712] Process XPCOM CC (pid: 4091, threadinfo ffff880091510000, task ffff8800953616b0) [ 105.164713] Stack: [ 105.164715] ffff880000000000 ffff8800b9c834b0 00007f5134800000 000000008158c4a5 [ 105.164719] ffff8800a210c064 00007f5134600000 ffff880091511ca8 ffffea00021e0000 [ 105.164723] ffff8800b9c83480 ffff8800a210c000 ffff88009fdc1d18 ffff8800a210c064 [ 105.164727] Call Trace: [ 105.164732] [<ffffffff81121048>] split_huge_page+0x68/0xb0 [ 105.164736] [<ffffffff81121d48>] __split_huge_page_pmd+0x1a8/0x220 [ 105.164740] [<ffffffff810f72f6>] unmap_page_range+0x1b6/0x2d0 [ 105.164744] [<ffffffff810f746b>] unmap_single_vma+0x5b/0xe0 [ 105.164747] [<ffffffff810f7e6c>] zap_page_range+0xbc/0x120 [ 105.164752] [<ffffffff8108f556>] ? futex_wake+0x116/0x130 [ 105.164756] [<ffffffff8106e396>] ? pick_next_task_fair+0x36/0xb0 [ 105.164760] [<ffffffff810f4367>] madvise_vma+0xf7/0x140 [ 105.164764] [<ffffffff810fddc2>] ? find_vma_prev+0x12/0x60 [ 105.164767] [<ffffffff810f45ed>] sys_madvise+0x23d/0x330 [ 105.164772] [<ffffffff8158e712>] system_call_fastpath+0x16/0x1b [ 105.164774] Code: 48 89 df e8 ed 10 ff ff e9 ab fe ff ff 0f 0b 41 8b 55 18 8b 75 bc ff c2 48 c7 c7 38 0e 7d 81 31 c0 e8 13 9b 46 00 e9 15 ff ff ff <0f> 0b 41 8b 4d 18 89 da ff c1 8b 75 bc 48 c7 c7 58 0e 7d 81 31 [ 105.164814] RIP [<ffffffff81120fb6>] __split_huge_page+0x216/0x240 [ 105.164818] RSP <ffff880091511c48> [ 105.164823] ---[ end trace 00c060fd7d17a3d4 ]---
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 5 lines · David R. Piegdon
Hi,
NOTE to everyone debugging this: reproduced quickly with X + firefox + youtube (adobe flash plugin)
Quoted 7 lines
Quoted 2 lines
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
I've had probably the same problem (dmesg below) and currently am trying your patch applied to current mainline (
101e5c7470eb7f). so far it looks very good. (before: bug after 5-30 minutes, right now 1h and counting)
That's good news, except the oops you've attached belongs to another bug, it seems. :P
People report good results when applying Hillf Danton suggestion to revert 5a505085f0 and 4fc3f1d66b1. So, if the bug reappears, you could help testing with the same procedure.
[Cc: linux-mm list]
Quoted 43 lines
thanks!
[ 105.164610] ------------[ cut here ]------------ [ 105.164614] kernel BUG at mm/huge_memory.c:1798! [ 105.164617] invalid opcode: 0000 [#1] PREEMPT SMP [ 105.164621] Modules linked in: fuse sha256_generic xt_owner xt_LOG xt_limit xt_recent xt_conntrack xt_multiport iptable_mangle xt_DSCP iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack fbcon font bitblit softcursor fb fbdev hwmon_vid btrfs zlib_deflate zlib_inflate xfs libcrc32c snd_usb_audio uvcvideo snd_usbmidi_lib videobuf2_core snd_rawmidi videobuf2_vmalloc videobuf2_memops hid_kensington iTCO_wdt joydev gpio_ich iTCO_vendor_support raid1 fglrx(PO) coretemp kvm_intel kvm skge acpi_cpufreq lpc_ich serio_raw asus_atk0110 snd_hda_codec_hdmi intel_agp snd_hda_intel mperf intel_gtt processor snd_hda_codec sky2 agpgart snd_hwdep [last unloaded: iTCO_wdt] [ 105.164672] CPU 1 [ 105.164677] Pid: 4091, comm: XPCOM CC Tainted: P O 3.8.0-rc1+ #43 System manufacturer System Product Name/P5B-Deluxe [ 105.164679] RIP: 0010:[<ffffffff81120fb6>] [<ffffffff81120fb6>] __split_huge_page+0x216/0x240 [ 105.164688] RSP: 0018:ffff880091511c48 EFLAGS: 00010297 [ 105.164690] RAX: 0000000000000001 RBX: ffff8800a210c000 RCX: 0000000000000042 [ 105.164692] RDX: 00000000000000cb RSI: 0000000000000046 RDI: ffffffff81b28a20 [ 105.164694] RBP: ffff880091511ca8 R08: 000000000000ffff R09: 0000000000000000 [ 105.164696] R10: 000000000000043d R11: 0000000000000001 R12: ffff8800a2295c60 [ 105.164698] R13: ffffea00021e0000 R14: 0000000000000000 R15: 00000007f5134600 [ 105.164701] FS: 00007f514991e700(0000) GS:ffff8800bfc80000(0000) knlGS:0000000000000000 [ 105.164703] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 105.164705] CR2: 00007f5123bff000 CR3: 000000009531b000 CR4: 00000000000007e0 [ 105.164707] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 105.164709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 105.164712] Process XPCOM CC (pid: 4091, threadinfo ffff880091510000, task ffff8800953616b0) [ 105.164713] Stack: [ 105.164715] ffff880000000000 ffff8800b9c834b0 00007f5134800000 000000008158c4a5 [ 105.164719] ffff8800a210c064 00007f5134600000 ffff880091511ca8 ffffea00021e0000 [ 105.164723] ffff8800b9c83480 ffff8800a210c000 ffff88009fdc1d18 ffff8800a210c064 [ 105.164727] Call Trace: [ 105.164732] [<ffffffff81121048>] split_huge_page+0x68/0xb0 [ 105.164736] [<ffffffff81121d48>] __split_huge_page_pmd+0x1a8/0x220 [ 105.164740] [<ffffffff810f72f6>] unmap_page_range+0x1b6/0x2d0 [ 105.164744] [<ffffffff810f746b>] unmap_single_vma+0x5b/0xe0 [ 105.164747] [<ffffffff810f7e6c>] zap_page_range+0xbc/0x120 [ 105.164752] [<ffffffff8108f556>] ? futex_wake+0x116/0x130 [ 105.164756] [<ffffffff8106e396>] ? pick_next_task_fair+0x36/0xb0 [ 105.164760] [<ffffffff810f4367>] madvise_vma+0xf7/0x140 [ 105.164764] [<ffffffff810fddc2>] ? find_vma_prev+0x12/0x60 [ 105.164767] [<ffffffff810f45ed>] sys_madvise+0x23d/0x330 [ 105.164772] [<ffffffff8158e712>] system_call_fastpath+0x16/0x1b [ 105.164774] Code: 48 89 df e8 ed 10 ff ff e9 ab fe ff ff 0f 0b 41 8b 55 18 8b 75 bc ff c2 48 c7 c7 38 0e 7d 81 31 c0 e8 13 9b 46 00 e9 15 ff ff ff <0f> 0b 41 8b 4d 18 89 da ff c1 8b 75 bc 48 c7 c7 58 0e 7d 81 31 [ 105.164814] RIP [<ffffffff81120fb6>] __split_huge_page+0x216/0x240 [ 105.164818] RSP <ffff880091511c48> [ 105.164823] ---[ end trace 00c060fd7d17a3d4 ]---
Signature · 7 lines
Zlatko -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zlatko CalusicQuoted 5 lines
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Hello Zlatko,
I have tested the below patch(applied it on mainline directly), but IMO, I'd like to say it maybe don't fix the issue completely.
run the reproducer[1] on two machine, one machine has 2 numa nodes(8Gb RAM), another one has 4 numa nodes(8Gb RAM), then the system hung all the time, such as the dmesg log:
[ 713.066937] Killed process 6085 (oom01) total-vm:18880768kB, anon-rss:7915612kB, file-rss:4kB [ 959.555269] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 959.562144] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1079.382018] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1079.388872] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1199.209709] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1199.216562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1319.036939] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1319.043794] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1438.864797] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1438.871649] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1558.691611] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1558.698466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
......
I'm not sure whether it's your patch triggering the hung task or not, but reverted cda73a10eb3, the reproducer(oom01) can PASS without both 'NULL pointer dereference at 0000000000000500' and hung task issues.
but some time, it's possible that the reproducer(oom01) cause hung task on a box with large RAM(100Gb+), so I can't judge it...
Thanks,
Zhouping
Quoted 73 lines
Thanks,
mm/vmscan.c +1
-0@@ -2564,6 +2564,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining, static unsigned long balance_pgdat(pg_data_t *pgdat, int order,int *classzone_idx) { +bool pgdat_is_balanced = false;struct zone *unbalanced_zone;int i;mm/vmscan.c +11
-6int end_zone =0 ;/* Inclusive. 0 = ZONE_DMA */ @@ -2638,8 +2639,11 @@ loop_again:zone_clear_flag (zone,ZONE_CONGESTED ); } } -if (i <0 ) + +if (i <0 ) { + pgdat_is_balanced = true; goto out; + }for (i =0 ; i <= end_zone; i++) {struct zone *zone = pgdat->node_zones + i;@@ -2766,8 +2770,11 @@ loop_again: pfmemalloc_watermark_ok(pgdat))wake_up (&pgdat->pfmemalloc_wait); -if (pgdat_balanced (pgdat, order, *classzone_idx)) +if (pgdat_balanced (pgdat, order, *classzone_idx)) { + pgdat_is_balanced = true;break ;/* kswapd: all done */ + } +/* * OK, kswapd is getting into trouble. Take a nap, then take * another pass across the zones. @@ -2775,7 +2782,7 @@ loop_again:if (total_scanned && (sc.priority <DEF_PRIORITY -2 )) {if (has_under_min_watermark_zone)count_vm_event (KSWAPD_SKIP_CONGESTION_WAIT ); -else +else if (unbalanced_zone)wait_iff_congested (unbalanced_zone,BLK_RW_ASYNC ,HZ /10 ); }@@ -2788,9 +2795,9 @@ loop_again:if (sc.nr_reclaimed >=SWAP_CLUSTER_MAX )break ; }while (--sc.priority >=0 ); -out: -if (!pgdat_balanced (pgdat, order, *classzone_idx)) { +out: +if (!pgdat_is_balanced) {cond_resched ();try_to_freeze (); --Zlatko
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Signature · 8 lines
Thanks, Zhouping -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 25 lines · Zhouping Liu
Quoted 4 lines
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Hello Zlatko,
I have tested the below patch(applied it on mainline directly), but IMO, I'd like to say it maybe don't fix the issue completely.
run the reproducer[1] on two machine, one machine has 2 numa nodes(8Gb RAM), another one has 4 numa nodes(8Gb RAM), then the system hung all the time, such as the dmesg log:
[ 713.066937] Killed process 6085 (oom01) total-vm:18880768kB, anon-rss:7915612kB, file-rss:4kB [ 959.555269] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 959.562144] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1079.382018] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1079.388872] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1199.209709] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1199.216562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1319.036939] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1319.043794] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1438.864797] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1438.871649] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1558.691611] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1558.698466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Quoted 6 lines
......
I'm not sure whether it's your patch triggering the hung task or not, but reverted
cda73a10eb3, the reproducer(oom01) can PASS without both 'NULL pointer dereference at 0000000000000500' and hung task issues.but some time, it's possible that the reproducer(oom01) cause hung task on a box with large RAM(100Gb+), so I can't judge it...
sorry, I forgot to link the reproducer.
oom01 in LTP test suite: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/oom/oom01.c
from my site, it can 100% reproduce the bug using oom01 test case.
Thanks,
Zhouping
Quoted 70 lines
Thanks,
ZhoupingQuoted 66 lines
Thanks,
mm/vmscan.c +1
-0@@ -2564,6 +2564,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining, static unsigned long balance_pgdat(pg_data_t *pgdat, int order,int *classzone_idx) { +bool pgdat_is_balanced = false;struct zone *unbalanced_zone;int i;int
end_zone= 0; /* Inclusive. 0 =ZONE_DMA*/mm/vmscan.c +11
-6@@ -2638,8 +2639,11 @@ loop_again:zone_clear_flag (zone,ZONE_CONGESTED ); } } -if (i <0 ) + +if (i <0 ) { + pgdat_is_balanced = true; goto out; + }for (i =0 ; i <= end_zone; i++) {struct zone *zone = pgdat->node_zones + i;@@ -2766,8 +2770,11 @@ loop_again: pfmemalloc_watermark_ok(pgdat))wake_up (&pgdat->pfmemalloc_wait); -if (pgdat_balanced (pgdat, order, *classzone_idx)) +if (pgdat_balanced (pgdat, order, *classzone_idx)) { + pgdat_is_balanced = true;break ;/* kswapd: all done */ + } +/* * OK, kswapd is getting into trouble. Take a nap, then take * another pass across the zones. @@ -2775,7 +2782,7 @@ loop_again:if (total_scanned && (sc.priority <DEF_PRIORITY -2 )) {if (has_under_min_watermark_zone)count_vm_event (KSWAPD_SKIP_CONGESTION_WAIT ); -else +else if (unbalanced_zone)wait_iff_congested (unbalanced_zone,BLK_RW_ASYNC ,HZ /10 ); }@@ -2788,9 +2795,9 @@ loop_again:if (sc.nr_reclaimed >=SWAP_CLUSTER_MAX )break ; }while (--sc.priority >=0 ); -out: -if (!pgdat_balanced (pgdat, order, *classzone_idx)) { +out: +if (!pgdat_is_balanced) {cond_resched ();try_to_freeze (); --Zlatko
Quoted 6 lines
Quoted 6 lines
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zhouping LiuQuoted 8 lines · Zhouping Liu
Quoted 4 lines
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Hello Zlatko,
I have tested the below patch(applied it on mainline directly), but IMO, I'd like to say it maybe don't fix the issue completely.
Hi Zlatko,
I re-tested it on another machine, which has 60+ Gb RAM and 4 numa nodes, without your patch, it's easy to reproduce the 'NULL pointer' error, after applying your patch, I couldn't reproduce the issue any more.
depending on the above, it implied that your patch fixed the issue.
but in my last mail, I tested it on two machines, which caused hung task with your patch, so I'm confusing is it your patch block some oom-killer performance? if it's not, your patch is good for me.
Thanks,
Zhouping
Quoted 93 lines
run the reproducer[1] on two machine, one machine has 2 numa nodes(8Gb RAM), another one has 4 numa nodes(8Gb RAM), then the system hung all the time, such as the dmesg log:
[ 713.066937] Killed process 6085 (oom01) total-vm:18880768kB, anon-rss:7915612kB, file-rss:4kB [ 959.555269] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 959.562144] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1079.382018] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1079.388872] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1199.209709] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1199.216562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1319.036939] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1319.043794] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1438.864797] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1438.871649] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1558.691611] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1558.698466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.......
I'm not sure whether it's your patch triggering the hung task or not, but reverted
cda73a10eb3, the reproducer(oom01) can PASS without both 'NULL pointer dereference at 0000000000000500' and hung task issues.but some time, it's possible that the reproducer(oom01) cause hung task on a box with large RAM(100Gb+), so I can't judge it...
Thanks,
ZhoupingQuoted 66 lines
Thanks,
mm/vmscan.c +1
-0@@ -2564,6 +2564,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining, static unsigned long balance_pgdat(pg_data_t *pgdat, int order,int *classzone_idx) { +bool pgdat_is_balanced = false;struct zone *unbalanced_zone;int i;int
end_zone= 0; /* Inclusive. 0 =ZONE_DMA*/mm/vmscan.c +11
-6@@ -2638,8 +2639,11 @@ loop_again:zone_clear_flag (zone,ZONE_CONGESTED ); } } -if (i <0 ) + +if (i <0 ) { + pgdat_is_balanced = true; goto out; + }for (i =0 ; i <= end_zone; i++) {struct zone *zone = pgdat->node_zones + i;@@ -2766,8 +2770,11 @@ loop_again: pfmemalloc_watermark_ok(pgdat))wake_up (&pgdat->pfmemalloc_wait); -if (pgdat_balanced (pgdat, order, *classzone_idx)) +if (pgdat_balanced (pgdat, order, *classzone_idx)) { + pgdat_is_balanced = true;break ;/* kswapd: all done */ + } +/* * OK, kswapd is getting into trouble. Take a nap, then take * another pass across the zones. @@ -2775,7 +2782,7 @@ loop_again:if (total_scanned && (sc.priority <DEF_PRIORITY -2 )) {if (has_under_min_watermark_zone)count_vm_event (KSWAPD_SKIP_CONGESTION_WAIT ); -else +else if (unbalanced_zone)wait_iff_congested (unbalanced_zone,BLK_RW_ASYNC ,HZ /10 ); }@@ -2788,9 +2795,9 @@ loop_again:if (sc.nr_reclaimed >=SWAP_CLUSTER_MAX )break ; }while (--sc.priority >=0 ); -out: -if (!pgdat_balanced (pgdat, order, *classzone_idx)) { +out: +if (!pgdat_is_balanced) {cond_resched ();try_to_freeze (); --Zlatko
Quoted 6 lines
Quoted 6 lines
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
Quoted 10 lines · Zhouping Liu
Quoted 8 lines · Zhouping Liu
Quoted 4 lines
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Hello Zlatko,
I have tested the below patch(applied it on mainline directly), but IMO, I'd like to say it maybe don't fix the issue completely.
Quoted 8 lines
Hi Zlatko,
I re-tested it on another machine, which has 60+ Gb RAM and 4 numa nodes, without your patch, it's easy to reproduce the 'NULL pointer' error, after applying your patch, I couldn't reproduce the issue any more.
depending on the above, it implied that your patch fixed the issue.
Yes, that's exactly what I expected. Just wanted to doublecheck this time. Live and learn. ;)
Quoted 5 lines
but in my last mail, I tested it on two machines, which caused hung task with your patch,
so I'm confusing is it your patch block some oom-killer performance? if it's not, your patch is good for me.
From what I know, the patch shouldn't have much influence on the oom killer, if any. But, as all those subsystems are closely interconnected, both oom & vmscan code is mm after all, there could be some interference. Is the hung-task issue repeatable?
Signature · 7 lines
Zlatko -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
In reply to Zhouping LiuQuoted 27 lines · Zhouping Liu
Quoted 5 lines
Thank you for the report Zhouping!
Would you be so kind to test the following patch and report results? Apply the patch to the latest mainline.
Hello Zlatko,
I have tested the below patch(applied it on mainline directly), but IMO, I'd like to say it maybe don't fix the issue completely.
run the reproducer[1] on two machine, one machine has 2 numa nodes(8Gb RAM), another one has 4 numa nodes(8Gb RAM), then the system hung all the time, such as the dmesg log:
[ 713.066937] Killed process 6085 (oom01) total-vm:18880768kB, anon-rss:7915612kB, file-rss:4kB [ 959.555269] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 959.562144] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1079.382018] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1079.388872] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1199.209709] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1199.216562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1319.036939] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1319.043794] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1438.864797] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1438.871649] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1558.691611] INFO: task kworker/13:2:147 blocked for more than 120 seconds. [ 1558.698466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Quoted 7 lines
......
I'm not sure whether it's your patch triggering the hung task or not, but reverted
cda73a10eb3, the reproducer(oom01) can PASS without both 'NULL pointer dereference at 0000000000000500' and hung task issues.but some time, it's possible that the reproducer(oom01) cause hung task on a box with large RAM(100Gb+), so I can't judge it...
Thanks for the test.
Yes, close to OOM things get quite unstable and it's hard to get reliable test results. Maybe you could run it a few times, and see if you can get any meaningful statistics out of a few runs. I need to check oom.c myself and see what it's doing. Thanks for the link.
Regards,
Signature · 7 lines
Zlatko -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
(Adding Michel and Rik to cc)
Quoted 6 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Sorry for the long delay in responding, first day back online after being off for a holiday. I can reproduce this problem. It takes many iterations but triggers within a minute. It also affects 3.8-rc2.
This BUG is triggered because the rmap walk is not finding all vmas mapping a page (walk found 0 avc's while the page mapcount was positive). THP requires this rmap walk to be correct or minimally all the pmds will not be marked as splitting. If PMDs are not marked splitting then all sorts of problems can occur. The test case triggering this is fairly simple.
o A process creates a mapping 10MB-4KB in size
o The process forks, then unmaps the entire mapping and exits
o First child forks then unmaps part of the mapping and exits
o Second child unmaps then unmaps part of the mapping and exits
The partial unmapping on a page boundary but not a THP boundary is what causes the THP split and allows this bug to be triggered. The two children are racing with each other.
I confirmed that this bug triggers on UMA and the THP migration for NUMA balancing is very unlikely to be a factor. As it looked like anon_vma rwsem was being taken for write in the correct places, it led me to conclude that this must be a race within split_huge_page() itself somewhere.
split_huge_page consists of three tasks
o __split_huge_page_splitting marks all PMDs as splitting
o __split_huge_page_refcount uses the page compound lock to serialise based on the page and converts the compount page into 512 base pages
o __split_huge_page_map uses the page table lock to serialise within the address space and updates the PTE
None of these affect avc linkages but they might be affecting the rmap walk after the conversion to interval trees. I'm adding Michel and Rik to the cc in case they can quickly spot how the walk could be affected during a THP split.
The patch below hides the race by serialising split_huge_page but the exact race needs to be identified before figuring out what the real locking problem is. That's as far as I got with it today and will pick it up again tomorrow. Better theories as to what is going wrong are welcome.
mm/huge_memory.c +3 -1
@@ -1822,6 +1822,8 @@ int split_huge_page(struct page *page) anon_vma =page_lock_anon_vma_read (page);if (!anon_vma) goto out; +page_unlock_anon_vma_read (anon_vma); +anon_vma_lock_write (anon_vma); ret =0 ;if (!PageCompound (page)) goto out_unlock;
@@ -1832,7 +1834,7 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); out:return ret; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 1/1 mm: thp: Acquire the anon_vma rwsem for lock during split
Zhouping, please test this patch.
Andrea and Hugh, any comments on whether this could be improved?
---8<---
mm: thp: Acquire the anon_vma rwsem for lock during split
Zhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP.
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter
+ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat +dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca +vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas
[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1b
Alexander Beregalov reported a very similar bug and Hillf Danton identified that commit 5a505085 (mm/rmap: Convert the struct anon_vma::mutex to an rwsem) and commit 4fc3f1d6 (mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable) were likely the problem. Reverting these commits was reported to solve the problem.
Despite the reason for these commits, NUMA balancing is not the direct source of the problem. split_huge_page() expected the anon_vma lock to be exclusive to serialise the whole split operation. Ordinarily it is expected that the anon_vma lock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following
1. mmap_sem for read or write prevents THPs being created underneath
2. anon_vma is taken for write if collapsing a huge page
3. mm->page_table_lock should be taken when checking if pmd_trans_huge as split_huge_page can run in parallel
4. wait_split_huge_page uses anon_vma taken for write mode to serialise against other THP operations
5. compound_lock is used to serialise between __split_huge_page_refcount() and gup
split_huge_page takes anon_vma for read but that does not serialise against parallel split_huge_page operations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes the anon_vma lock for write to serialise against parallel split_huge_page and parallel collapse operations as it is the most fine-grained lock available that protects against both.
--- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
mm/huge_memory.c +13 -2
@@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page)BUG_ON (is_huge_zero_pfn (page_to_pfn (page)));BUG_ON (!PageAnon (page)); - anon_vma =page_lock_anon_vma_read (page); + +/* +* The caller does not necessarily hold an mmap_sem that would prevent +* the anon_vma disappearing so we first we take a reference to it +* and then lock the anon_vma for write. This is similar to +* page_lock_anon_vma_read except the write lock is taken to serialise +* against parallel split or collapse operations. +*/ + anon_vma =page_get_anon_vma (page);if (!anon_vma) goto out; +anon_vma_lock_write (anon_vma); + ret =0 ;if (!PageCompound (page)) goto out_unlock;
@@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); +put_anon_vma (anon_vma); out:return ret; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
I've added Alexander, Hillf and Alex to the Cc.
Quoted 3 lines · Mel Gorman
Zhouping, please test this patch.
Andrea and Hugh, any comments on whether this could be improved?
Your patch itself looks just right to me, no improvement required; and it's easy to understand how the bug crept in, from a blanket rwsem replacement of anon_vma mutex meeting the harmless-looking anon_vma_interval_tree_foreach in __split_huge_page, which looked as if it needed only the readlock provided by the usual method.
But I'd fight shy myself of trying to describe all the THP locking conventions in the commit message: I haven't really tried to work out just how right you've got all those details.
The actual race in question here was just two processes (one or both forked) doing split_huge_page() on the same THPage at the same time, wasn't it? (Though of course we only see the backtrace from one of them.) Which would be very confusing, and no surprise that the pmd_trans_splitting test ends up skipping pmds already updated by the racing process, so the mapcount doesn't match what's expected. Of course we need exclusive lock against that, which you give it.
Quoted 3 lines
---8<---
mm: thp: Acquire theanon_vmarwsem for lock during split
"write" rather than "lock"?
Quoted 51 lines
Zhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP.
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter(quoted diff) +3
-0+ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat +dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca +vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1b
Quoted 1 line
Alexander Beregalov reported a very similar bug and Hillf Danton identified
And Alex Xu.
Quoted 62 lines
that commit
5a505085(mm/rmap: Convert the structanon_vma::mutexto an rwsem) and commit4fc3f1d6(mm/rmap, migration: Makermap_walk_anon()andtry_to_unmap_anon()more scalable) were likely the problem. Reverting these commits was reported to solve the problem.Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gup
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Reported-by Zhouping Liu <[email protected]>Reported-by Alexander Beregalov <[email protected]>Signed-off-by Mel Gorman <[email protected]>--- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)mm/huge_memory.c +11
-1@@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page)BUG_ON (is_huge_zero_pfn (page_to_pfn (page)));BUG_ON (!PageAnon (page)); - anon_vma =page_lock_anon_vma_read (page); + +/* +* The caller does not necessarily hold an mmap_sem that would prevent +* the anon_vma disappearing so we first we take a reference to it +* and then lock the anon_vma for write. This is similar to +* page_lock_anon_vma_read except the write lock is taken to serialise +* against parallel split or collapse operations. +*/ + anon_vma =page_get_anon_vma (page);if (!anon_vma) goto out; +anon_vma_lock_write (anon_vma); + ret =0 ;if (!PageCompound (page)) goto out_unlock;
mm/huge_memory.c int split_huge_page(struct page *page) · line 1849
Quoted 9 lines
mm/huge_memory.c +2
-1@@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); +put_anon_vma (anon_vma); out:return ret; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
Quoted 5 lines · Hugh Dickins
I've added Alexander, Hillf and Alex to the Cc.
Quoted 2 lines · Mel Gorman
Zhouping, please test this patch.
Quoted 8 lines
Quoted 1 line
Andrea and Hugh, any comments on whether this could be improved?
Your patch itself looks just right to me, no improvement required; and it's easy to understand how the bug crept in, from a blanket rwsem replacement of
anon_vmamutex meeting the harmless-lookinganon_vma_interval_tree_foreachin__split_huge_page, which looked as if it needed only the readlock provided by the usual method.
Indeed. Thanks Hugh for taking a look over it.
Quoted 4 lines
But I'd fight shy myself of trying to describe all the THP locking conventions in the commit message: I haven't really tried to work out just how right you've got all those details.
I thought it was risky myself but it was the best way of getting Andrea to object if I missed some subtlety! If I had infinite time I would follow up with a patch to Documentation/vm/transhuge.txt explaining how the anon_vma lock is used by THP.
Quoted 8 lines
The actual race in question here was just two processes (one or both forked) doing
split_huge_page()on the same THPage at the same time, wasn't it? (Though of course we only see the backtrace from one of them.) Which would be very confusing, and no surprise that thepmd_trans_splittingtest ends up skipping pmds already updated by the racing process, so the mapcount doesn't match what's expected. Of course we need exclusive lock against that, which you give it.
Ok, thanks. Will resend to Andrew with some changelog edits.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH 1/1 mm: thp: Acquire the anon_vma rwsem for write during split
In reply to Hugh DickinsZhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP.
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter
+ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat +dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca +vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas
[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1b
Alexander Beregalov and Alex Xu reported similar bugs and Hillf Danton identified that commit 5a505085 (mm/rmap: Convert the struct anon_vma::mutex to an rwsem) and commit 4fc3f1d6 (mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable) were likely the problem. Reverting these commits was reported to solve the problem for Alexander.
Despite the reason for these commits, NUMA balancing is not the direct source of the problem. split_huge_page() expects the anon_vma lock to be exclusive to serialise the whole split operation. Ordinarily it is expected that the anon_vma lock would only be required when updating the avcs but THP also uses the anon_vma rwsem for collapse and split operations where the page lock or compound lock cannot be used (as the page is changing from base to THP or vice versa) and the page table locks are insufficient.
This patch takes the anon_vma lock for write to serialise against parallel split_huge_page as THP expected before the conversion to rwsem.
--- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
mm/huge_memory.c +13 -2
@@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page)BUG_ON (is_huge_zero_pfn (page_to_pfn (page)));BUG_ON (!PageAnon (page)); - anon_vma =page_lock_anon_vma_read (page); + +/* +* The caller does not necessarily hold an mmap_sem that would prevent +* the anon_vma disappearing so we first we take a reference to it +* and then lock the anon_vma for write. This is similar to +* page_lock_anon_vma_read except the write lock is taken to serialise +* against parallel split or collapse operations. +*/ + anon_vma =page_get_anon_vma (page);if (!anon_vma) goto out; +anon_vma_lock_write (anon_vma); + ret =0 ;if (!PageCompound (page)) goto out_unlock;
@@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); +put_anon_vma (anon_vma); out:return ret; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
In reply to Mel GormanQuoted 16 lines · Mel Gorman
Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gup
Quoted 7 lines
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.
Your comment about this being the most fine-grained lock made me think, couldn't we use lock_page() on the THP page here ?
Now I don't necessarily want to push you that direction, because I haven't fully thought it trough and because what you propose brings us closer to what happened before anon_vma became an rwlock, which is more obviously safe. But I felt I should still mention it, since we're really only trying to protect from concurrent operations on the same THP page, so locking at just that granularity would seem desirable.
Signature · 8 lines
Michel "Walken" Lespinasse A program is never fully debugged until the last user dies. -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
Quoted 28 lines · Michel Lespinasse
Quoted 16 lines · Mel Gorman
Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gupQuoted 7 lines
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Your comment about this being the most fine-grained lock made me think, couldn't we use
lock_page()on the THP page here ?
Quoted 6 lines
Now I don't necessarily want to push you that direction, because I haven't fully thought it trough and because what you propose brings us closer to what happened before
anon_vmabecame an rwlock, which is more obviously safe. But I felt I should still mention it, since we're really only trying to protect from concurrent operations on the same THP page, so locking at just that granularity would seem desirable.
Why you said that anon_vma lock who will protect page associated to a list of vmas is fine-grained then page lock who just protect one page?
Quoted 1 line
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
Quoted 36 lines · Simon Jeons
Quoted 28 lines · Michel Lespinasse
Quoted 16 lines · Mel Gorman
Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gupQuoted 7 lines
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Your comment about this being the most fine-grained lock made me think, couldn't we use
lock_page()on the THP page here ?Quoted 6 lines
Now I don't necessarily want to push you that direction, because I haven't fully thought it trough and because what you propose brings us closer to what happened before
anon_vmabecame an rwlock, which is more obviously safe. But I felt I should still mention it, since we're really only trying to protect from concurrent operations on the same THP page, so locking at just that granularity would seem desirable.
Quoted 3 lines
Why you said that
anon_vmalock who will protect page associated to a list of vmas is fine-grained then page lock who just protect one page?
We did not say it was fine-grained, we said it was the most fine-grained lock available. It's a coarse lock but using the page lock would be problematic.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
In reply to Michel LespinasseQuoted 28 lines · Michel Lespinasse
Quoted 16 lines · Mel Gorman
Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gupQuoted 7 lines
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Your comment about this being the most fine-grained lock made me think, couldn't we use
lock_page()on the THP page here ?
Quoted 7 lines
Now I don't necessarily want to push you that direction, because I haven't fully thought it trough and because what you propose brings us closer to what happened before
anon_vmabecame an rwlock, which is more obviously safe. But I felt I should still mention it, since we're really only trying to protect from concurrent operations on the same THP page, so locking at just that granularity would seem desirable.
I considered this too because anon_vma locking is really coarse. The coarse nature is not the only issue as depending on the anon_vma lock is yet another obstacle to using THP for file-backed pages. I also did not think about it fully but it felt that trying to convert to the page lock would be problematic. Take reclaim;
shrink_page_list (trylock_page so we hold the page lock)
-> add_to_swap
-> split_huge_page (lock_page)
BANG, we recursively lock. During collapse it's also problematic because we use the anon_vma lock to protect the whole operation but still depend on the page lock to protect against LRU modifications. We take the page lock before isolating the page from the LRU otherwise we'd have to disable IRQs each time and that would ugly.
I did not think converting to the page lock woul dbe impossible but it it non-trivial and it's not better if it means we have to take the LRU lock frequently in khugepaged when collapsing to a THP.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
In reply to Mel GormanQuoted 1 line · Mel Gorman
Zhouping, please test this patch.
Tested it, the issue is gone with following patch.
Thanks,
Zhouping
Quoted 119 lines
Andrea and Hugh, any comments on whether this could be improved?
---8<---
mm: thp: Acquire theanon_vmarwsem for lock during splitZhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP.
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter(quoted diff) +3
-0+ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat +dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca +vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1bAlexander Beregalov reported a very similar bug and Hillf Danton identified that commit
5a505085(mm/rmap: Convert the structanon_vma::mutexto an rwsem) and commit4fc3f1d6(mm/rmap, migration: Makermap_walk_anon()andtry_to_unmap_anon()more scalable) were likely the problem. Reverting these commits was reported to solve the problem.Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gup
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Reported-by Zhouping Liu <[email protected]>Reported-by Alexander Beregalov <[email protected]>Signed-off-by Mel Gorman <[email protected]>--- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)mm/huge_memory.c +11
-1@@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page)BUG_ON (is_huge_zero_pfn (page_to_pfn (page)));BUG_ON (!PageAnon (page)); - anon_vma =page_lock_anon_vma_read (page); + +/* +* The caller does not necessarily hold an mmap_sem that would prevent +* the anon_vma disappearing so we first we take a reference to it +* and then lock the anon_vma for write. This is similar to +* page_lock_anon_vma_read except the write lock is taken to serialise +* against parallel split or collapse operations. +*/ + anon_vma =page_get_anon_vma (page);if (!anon_vma) goto out; +anon_vma_lock_write (anon_vma); + ret =0 ;if (!PageCompound (page)) goto out_unlock;
mm/huge_memory.c int split_huge_page(struct page *page) · line 1849
Quoted 9 lines
mm/huge_memory.c +2
-1@@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); +put_anon_vma (anon_vma); out:return ret; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
Quoted 7 lines · Zhouping Liu
Quoted 1 line · Mel Gorman
Zhouping, please test this patch.
Tested it, the issue is gone with following patch.
Tested-by Zhouping Liu <[email protected]>
Super. Thanks very much for reporting and testing this quickly.
Signature · 8 lines
Mel Gorman SUSE Labs -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [PATCH] mm: thp: Acquire the anon_vma rwsem for lock during split
In reply to Mel GormanQuoted 70 lines · Mel Gorman
Zhouping, please test this patch.
Andrea and Hugh, any comments on whether this could be improved?
---8<---
mm: thp: Acquire theanon_vmarwsem for lock during splitZhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP.
[ 588.143072] mapcount 0 page_mapcount 3 [ 588.147471] ------------[ cut here ]------------ [ 588.152856] kernel BUG at mm/huge_memory.c:1798! [ 588.158125] invalid opcode: 0000 [#1] SMP [ 588.162882] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter(quoted diff) +3
-0+ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat +dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca +vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas[ 588.246517] CPU 1 [ 588.248636] Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 [ 588.262171] RIP: 0010:[<ffffffff8118fac7>] [<ffffffff8118fac7>] __split_huge_page+0x677/0x6d0 [ 588.272067] RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 [ 588.278235] RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 [ 588.286394] RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 [ 588.294216] RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a [ 588.302441] R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 [ 588.310495] R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 [ 588.318640] FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 [ 588.327894] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 588.334569] CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 [ 588.342718] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 588.350861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 588.359134] Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) [ 588.368667] Stack: [ 588.370960] ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 [ 588.379566] ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c [ 588.388150] 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 [ 588.396711] Call Trace: [ 588.455106] [<ffffffff816017b5>] ? rwsem_down_read_failed+0x15/0x17 [ 588.518106] [<ffffffff812fa014>] ? call_rwsem_down_read_failed+0x14/0x30 [ 588.580897] [<ffffffff815ffc04>] ? down_read+0x24/0x2b [ 588.642630] [<ffffffff8118fb88>] split_huge_page+0x68/0xb0 [ 588.703814] [<ffffffff81190ed4>] __split_huge_page_pmd+0x134/0x330 [ 588.766064] [<ffffffff8104b997>] ? pte_alloc_one+0x37/0x50 [ 588.826460] [<ffffffff81191121>] split_huge_page_pmd_mm+0x51/0x60 [ 588.887746] [<ffffffff8119116b>] split_huge_page_address+0x3b/0x50 [ 588.948673] [<ffffffff8119121c>] __vma_adjust_trans_huge+0x9c/0xf0 [ 589.008660] [<ffffffff811650f4>] vma_adjust+0x684/0x750 [ 589.066328] [<ffffffff811653ba>] __split_vma.isra.28+0x1fa/0x220 [ 589.123497] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [ 589.180704] [<ffffffff811661a9>] do_munmap+0xf9/0x420 [ 589.237461] [<ffffffff8160026c>] ? __schedule+0x3cc/0x7b0 [ 589.294520] [<ffffffff8116651e>] vm_munmap+0x4e/0x70 [ 589.350784] [<ffffffff8116741b>] sys_munmap+0x2b/0x40 [ 589.406971] [<ffffffff8160a159>] system_call_fastpath+0x16/0x1bAlexander Beregalov reported a very similar bug and Hillf Danton identified that commit
5a505085(mm/rmap: Convert the structanon_vma::mutexto an rwsem) and commit4fc3f1d6(mm/rmap, migration: Makermap_walk_anon()andtry_to_unmap_anon()more scalable) were likely the problem. Reverting these commits was reported to solve the problem.Despite the reason for these commits, NUMA balancing is not the direct source of the problem.
split_huge_page()expected theanon_vmalock to be exclusive to serialise the whole split operation. Ordinarily it is expected that theanon_vmalock would only be required when updating the avcs but THP also uses it. The locking requirements for THP are complex and there is some overlap but broadly speaking they include the following
Quoted 8 lines
1.
mmap_semfor read or write prevents THPs being created underneath
2.anon_vmais taken for write if collapsing a huge page
3.mm->page_table_lockshould be taken when checking ifpmd_trans_hugeassplit_huge_pagecan run in parallel
4.wait_split_huge_pageusesanon_vmataken for write mode to serialise against other THP operations
5.compound_lockis used to serialise between__split_huge_page_refcount()and gup
Can't find gup path hold compound_lock.
Quoted 53 lines
split_huge_pagetakesanon_vmafor read but that does not serialise against parallelsplit_huge_pageoperations on the same page (rule 2). One process could be modifying the ref counts while the other modifies the page tables leading to counters not being reliable. This patch takes theanon_vmalock for write to serialise against parallelsplit_huge_pageand parallel collapse operations as it is the most fine-grained lock available that protects against both.Reported-by Zhouping Liu <[email protected]>Reported-by Alexander Beregalov <[email protected]>Signed-off-by Mel Gorman <[email protected]>--- mm/huge_memory.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)mm/huge_memory.c +13
-3@@ -1819,9 +1819,19 @@ int split_huge_page(struct page *page)BUG_ON (is_huge_zero_pfn (page_to_pfn (page)));BUG_ON (!PageAnon (page)); - anon_vma =page_lock_anon_vma_read (page); + +/* +* The caller does not necessarily hold an mmap_sem that would prevent +* the anon_vma disappearing so we first we take a reference to it +* and then lock the anon_vma for write. This is similar to +* page_lock_anon_vma_read except the write lock is taken to serialise +* against parallel split or collapse operations. +*/ + anon_vma =page_get_anon_vma (page);if (!anon_vma) goto out; +anon_vma_lock_write (anon_vma); + ret =0 ;if (!PageCompound (page)) goto out_unlock;@@ -1832,7 +1842,8 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); +put_anon_vma (anon_vma); out:return ret; } --
Quoted 4 lines
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 48 lines · Mel Gorman
(Adding Michel and Rik to cc)
Quoted 6 lines · Zhouping Liu
Hello all,
I found the below kernel bug using latest mainline(637704cbc95), my hardware has 2 numa nodes, and it's easy to reproduce the issue using LTP test case: "# ./mmap10 -a -s -c 200":
Sorry for the long delay in responding, first day back online after being off for a holiday. I can reproduce this problem. It takes many iterations but triggers within a minute. It also affects 3.8-rc2.
This BUG is triggered because the rmap walk is not finding all vmas mapping a page (walk found 0 avc's while the page mapcount was positive). THP requires this rmap walk to be correct or minimally all the pmds will not be marked as splitting. If PMDs are not marked splitting then all sorts of problems can occur. The test case triggering this is fairly simple.
o A process creates a mapping 10MB-4KB in size
o The process forks, then unmaps the entire mapping and exits
o First child forks then unmaps part of the mapping and exits
o Second child unmaps then unmaps part of the mapping and exitsThe partial unmapping on a page boundary but not a THP boundary is what causes the THP split and allows this bug to be triggered. The two children are racing with each other.
I confirmed that this bug triggers on UMA and the THP migration for NUMA balancing is very unlikely to be a factor. As it looked like
anon_vmarwsem was being taken for write in the correct places, it led me to conclude that this must be a race withinsplit_huge_page()itself somewhere.
split_huge_pageconsists of three taskso
__split_huge_page_splittingmarks all PMDs as splittingo
__split_huge_page_refcountuses the page compound lock to serialise based on the page and converts the compount page into 512 base pageso
__split_huge_page_mapuses the page table lock to serialise within the address space and updates the PTENone of these affect avc linkages but they might be affecting the rmap walk after the conversion to interval trees. I'm adding Michel and Rik to the cc in case they can quickly spot how the walk could be affected during a THP split.
Quoted 4 lines
The patch below hides the race by serialising
split_huge_pagebut the exact race needs to be identified before figuring out what the real locking problem is. That's as far as I got with it today and will pick it up again tomorrow. Better theories as to what is going wrong are welcome.
Hello Mel,
I have tested the below patch, and run the reproducer for a long time, the issue couldn't be triggered any more with the patch.
Thanks for your patch, and I will tested your new patch(it seemed that this one is a little different with the new one), provide the feedback ASAP.
Zhouping
Quoted 25 lines
mm/huge_memory.c +3
-2@@ -1822,6 +1822,8 @@ int split_huge_page(struct page *page) anon_vma =page_lock_anon_vma_read (page);if (!anon_vma) goto out; +page_unlock_anon_vma_read (anon_vma); +anon_vma_lock_write (anon_vma); ret =0 ;if (!PageCompound (page)) goto out_unlock;@@ -1832,7 +1834,7 @@ int split_huge_page(struct page *page)BUG_ON (PageCompound (page)); out_unlock: -page_unlock_anon_vma_read (anon_vma); +anon_vma_unlock (anon_vma); out:return ret; } --
Quoted 4 lines
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>