ARM: mx5: Fix MX53 flexcan2 clock
Subsystems (2)
PATCH 1/1 ARM: mx5: Fix MX53 flexcan2 clock
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port.
Signed-off-by Marek Vasut <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Shawn Guo <[email protected]>
--- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx53.dtsi +1 -1
@@ -614,7 +614,7 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks 87>, <&clks 86>; clock-names = "ipg", "per"; status = "disabled"; };
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 1/1 ARM: mx5: Fix MX53 flexcan2 clock
Quoted 6 lines · Marek Vasut
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port.
Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Shawn Guo <[email protected]>
Looks Good.
Acked-by Sascha Hauer <[email protected]>
Sascha
Quoted 26 lines
--- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/imx53.dtsi +1
-1@@ -614,7 +614,7 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks 87>, <&clks 86>; clock-names = "ipg", "per"; status = "disabled"; };Signature · 7 lines
1.7.10.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Shawn Guo
AppliedPATCH 1/1 ARM: mx5: Fix MX53 flexcan2 clock
Quoted 11 lines · Sascha Hauer
Quoted 6 lines · Marek Vasut
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port.
Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc Shawn Guo <[email protected]>Looks Good.
Acked-by Sascha Hauer <[email protected]>
Applied, thanks.