Skip to contentSkip to conversation

Add basic VLAN support to bridges

PATCH Superseded Vlad Yasevich 3 participants 32 messages Jan 9, 2013 – Jan 11, 2013

Subsystems (4)

v5 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v5 cover Add basic VLAN support to bridges

This series of patches provides an ability to add VLANs to the bridge ports. This is similar to what can be found in most switches. The bridge port may have any number of VLANs added to it including vlan 0 priority tagged traffic. When vlans are added to the port, only traffic tagged with particular vlan will forwarded over this port. Additionally, vlan ids are added to FDB entries and become part of the lookup. This way we correctly identify the FDB entry.

A single vlan per port may also be designated as a PVID. Any untagged traffic recieved by the port will be assigned to this vlan and all further processing will be done with this vlan in mind.

Any number for vlans per port may also be designated as untagged. This defines their egress policy such that any frame exiting the port with a VID matching the untagged vlan will exit untagged (the bridge will strip the vlan header).

Bridge device is trated as just another port for the purposes of vlan configuration so, users have to configure which vlans are allowed to enter and exit the bridge master device.

The default behavior of the bridge is unchanged if no vlans have been configured. Default behavior of each port is also unchanged if no vlans are configured on that port (i.e there are no ingress/egress checks or vlan header manipulation).

Changes since v4:
- Pull per-port vlan data into its own structures and give it to the bridge device thus making bridge device behave like a regular port for vlan configuration.
- Add a per-vlan 'untagged' bitmap that determins egress policy. If a port is part of this bitmap, traffic egresses untagged.
- PVID is now used for ingress policy only. Incomming frames without VLAN tag are assigned to the PVID vlan. Egress is determined via bitmap memberships.
- Allow for incremental config of a vlan. Now, PVID and untagged memberships may be set on existing vlans. They however can NOT be cleared separately.
- VLAN deletion is now done via RTM_DELLINK command for PF_BRIDGE family. This cleans up the netlink interface.

Changes since v3:
- Re-integrated compiler problems that got left out last time. Appologies.
- checkpatches.pl errors fixed

Changes since v2:
- Added inline functiosn to manimulate vlan hw filters and re-use in 8021q and bridge code.
- Use rtnl_dereference (Michael Tsirkin)
- Remove synchronize_net() call (Eric Dumazet)
- Fix NULL ptr deref bug I introduced in br_ifinfo_notify.

Changes since v1:
- Fixed some forwarding bugs.
- Add vlan to local fdb entries. New local entries are created per vlan to facilite correct forwarding to bridge interface.
- Allow configuration of vlans directly on the bridge master device in addition to ports.

Changes since rfc v2:
- Per-port vlan bitmap is gone and is replaced with a vlan list.
- Added bridge vlan list, which is referenced by each port. Entries in the birdge vlan list have port bitmap that shows which port are parts of which vlan.
- Netlink API changes.
- Dropped sysfs support for now. If people think this is really usefull, can add it back.
- Support for native/untagged vlans.

Changes since rfc v1:
- Comments addressed regarding formatting and RCU usage
- iocts have been removed and changed over the netlink interface.
- Added support of user added ndb entries.
- changed sysfs interface to export a bitmap. Also added a write interface. I am not sure how much I like it, but it made my testing easier/faster. I might change the write interface to take text instead of binary.

Vlad Yasevich (14):
vlan: wrap hw-acceleration calls in separate functions.
bridge: Add vlan filtering infrastructure
bridge: Validate that vlan is permitted on ingress
bridge: Verify that a vlan is allowed to egress on give port
bridge: Cache vlan in the cb for faster egress lookup.
bridge: Add vlan to unicast fdb entries
bridge: Add vlan id to multicast groups
bridge: Add netlink interface to configure vlans on bridge ports
bridge: Add vlan support to static neighbors
bridge: Add the ability to configure pvid
bridge: API to configure egress policy
bridge: Implement vlan ingress/egress policy
bridge: Dump vlan information from a bridge port
bridge: Add vlan support for local fdb entries

 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    5 +-
 drivers/net/macvlan.c                         |    2 +-
 drivers/net/vxlan.c                           |    3 +-
 include/linux/if_vlan.h                       |   57 ++++
 include/linux/netdevice.h                     |    6 +-
 include/uapi/linux/if_bridge.h                |   13 +-
 include/uapi/linux/neighbour.h                |    1 +
 include/uapi/linux/rtnetlink.h                |    1 +
 net/8021q/vlan.c                              |    4 +-
 net/8021q/vlan_core.c                         |   24 +--
 net/bridge/br_device.c                        |   13 +-
 net/bridge/br_fdb.c                           |  254 +++++++++++++++----
 net/bridge/br_forward.c                       |  131 ++++++++++
 net/bridge/br_if.c                            |  347 ++++++++++++++++++++++++-
 net/bridge/br_input.c                         |   69 +++++-
 net/bridge/br_multicast.c                     |   71 ++++--
 net/bridge/br_netlink.c                       |  242 +++++++++++++++--
 net/bridge/br_private.h                       |  101 +++++++-
 net/core/rtnetlink.c                          |  111 +++++++-
 19 files changed, 1307 insertions(+), 148 deletions(-)
Signature · 1 line
1.7.7.6
#1 lore raw

PATCH v5 1/14 vlan: wrap hw-acceleration calls in separate functions.

Wrap VLAN hardware acceleration calls into separate functions. This way other code can re-use it.

---
 include/linux/if_vlan.h |   57 +++++++++++++++++++++++++++++++++++++++++++++++
 net/8021q/vlan.c        |    4 +--
 net/8021q/vlan_core.c   |   24 ++++++-------------
 3 files changed, 66 insertions(+), 19 deletions(-)
include/linux/if_vlan.h +57 -0
index d06cc5c..e1deb91 100644
@@ -158,6 +158,63 @@ static inline bool vlan_uses_dev(const struct net_device *dev)
 #endif
 
 /**
+ * vlan_hw_buggy - Check to see if VLAN hw acceleration is supported.
+ * @dev: netdevice of the lowerdev/hw nic
+ *
+ * Checks to see if HW and driver report VLAN acceleration correctly.
+ */
+static inline bool vlan_hw_buggy(const struct net_device *dev)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid))
+		return true;
+
+	return false;
+}
+
+/**
+ * vlan_vid_add_hw - Add the VLAN vid to the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Inserts the vid into the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_add_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_add_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
+ * vlan_vid_del_hw - Delete the VLAN vid from the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Delete the vid from the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_del_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_kill_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
  * vlan_insert_tag - regular VLAN tag inserting
  * @skb: skbuff to tag
  * @vlan_tci: VLAN TCI to insert
net/8021q/vlan.c +1 -3
index babfde9..540d759 100644
@@ -117,15 +117,13 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
 int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id)
 {
 	const char *name = real_dev->name;
-	const struct net_device_ops *ops = real_dev->netdev_ops;
 
 	if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
 		pr_info("VLANs not supported on %s\n", name);
 		return -EOPNOTSUPP;
 	}
 
-	if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
-	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid)) {
+	if (vlan_hw_buggy(real_dev)) {
 		pr_info("Device %s has buggy VLAN hw accel\n", name);
 		return -EOPNOTSUPP;
 	}
net/8021q/vlan_core.c +8 -16
index 380440b..04a1f03 100644
@@ -216,7 +216,6 @@ static int __vlan_vid_add(struct vlan_info *vlan_info, unsigned short vid,
 			  struct vlan_vid_info **pvid_info)
 {
 	struct net_device *dev = vlan_info->real_dev;
-	const struct net_device_ops *ops = dev->netdev_ops;
 	struct vlan_vid_info *vid_info;
 	int err;
 
@@ -224,13 +223,10 @@ static int __vlan_vid_add(struct vlan_info *vlan_info, unsigned short vid,
 	if (!vid_info)
 		return -ENOMEM;
 
-	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
-	    ops->ndo_vlan_rx_add_vid) {
-		err =  ops->ndo_vlan_rx_add_vid(dev, vid);
-		if (err) {
-			kfree(vid_info);
-			return err;
-		}
+	err = vlan_vid_add_hw(dev, vid);
+	if (err) {
+		kfree(vid_info);
+		return err;
 	}
 	list_add(&vid_info->list, &vlan_info->vid_list);
 	vlan_info->nr_vids++;
@@ -278,17 +274,13 @@ static void __vlan_vid_del(struct vlan_info *vlan_info,
 			   struct vlan_vid_info *vid_info)
 {
 	struct net_device *dev = vlan_info->real_dev;
-	const struct net_device_ops *ops = dev->netdev_ops;
 	unsigned short vid = vid_info->vid;
 	int err;
 
-	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
-	     ops->ndo_vlan_rx_kill_vid) {
-		err = ops->ndo_vlan_rx_kill_vid(dev, vid);
-		if (err) {
-			pr_warn("failed to kill vid %d for device %s\n",
-				vid, dev->name);
-		}
+	err = vlan_vid_del_hw(dev, vid);
+	if (err) {
+		pr_warn("failed to kill vid %d for device %s\n",
+			vid, dev->name);
 	}
 	list_del(&vid_info->list);
 	kfree(vid_info);
Signature · 1 line
1.7.7.6
#2 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 48 lines · On Wed, 9 Jan 2013 12:17:48 -0500 Vlad Yasevich <[email protected]> wrote:

/**
+ * vlan_hw_buggy - Check to see if VLAN hw acceleration is supported.
+ * @dev: netdevice of the lowerdev/hw nic
+ *
+ * Checks to see if HW and driver report VLAN acceleration correctly.
+ */

include/linux/if_vlan.h +41 -0
+static inline bool vlan_hw_buggy(const struct net_device *dev)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid))
+		return true;
+
+	return false;
+}
+
+/**
+ * vlan_vid_add_hw - Add the VLAN vid to the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Inserts the vid into the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_add_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_add_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
+ * vlan_vid_del_hw - Delete the VLAN vid from the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Delete the vid from the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_del_hw(struct net_device *dev,
+				  unsigned short vid)
+{

include/linux/if_vlan.h static inline bool vlan_uses_dev(const struct net_device *dev) · line 216

Quoted 10 lines
include/linux/if_vlan.h +10 -0
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_kill_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+

I would rather not have all these inline's. This isn't performance critical. Also, the check for buggy devices should be done inside the vlan code, not repeated in the functions using the add/remove API. When device is registered the flag and add/kill should be checked, and if the device driver is buggy it should fail the register_netdevice.

#3 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 55 lines · Stephen Hemminger
Quoted 52 lines · On Wed, 9 Jan 2013 12:17:48 -0500 Vlad Yasevich <[email protected]> wrote:

/**
+ * vlan_hw_buggy - Check to see if VLAN hw acceleration is supported.
+ * @dev: netdevice of the lowerdev/hw nic
+ *
+ * Checks to see if HW and driver report VLAN acceleration correctly.
+ */

include/linux/if_vlan.h +45 -0
+static inline bool vlan_hw_buggy(const struct net_device *dev)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid))
+		return true;
+
+	return false;
+}
+
+/**
+ * vlan_vid_add_hw - Add the VLAN vid to the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Inserts the vid into the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_add_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_add_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
+ * vlan_vid_del_hw - Delete the VLAN vid from the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Delete the vid from the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_del_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
Quoted 8 lines

include/linux/if_vlan.h static inline bool vlan_uses_dev(const struct net_device *dev) · line 216

Quoted 6 lines
include/linux/if_vlan.h +6 -0
+	    ops->ndo_vlan_rx_kill_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+

I would rather not have all these inline's. This isn't performance critical.

I kind of need to keep them as inlines because of the VLAN support is built. Right now, none of the VLAN files are build if VLAN support is turned off. So all we get access to are inlines from if_vlan.h.

I suppose I can change how VLANs get built, but not if that's the right thing. It looks like it is set up the way it is on purpose.

Quoted 5 lines

Also, the check for buggy devices should be done inside the vlan code, not repeated in the functions using the add/remove API. When device is registered the flag and add/kill should be checked, and if the device driver is buggy it should fail the register_netdevice.

Not sure what you mean here. I don't check if it's buggy again. I check that the device supports filter and the pointer is set. I does
exactly what the code used to do. I suppose that the checks for valid
function pointers may be a little redundant since otherwise vlan_hw_buggy() would have triggered, but it's safer to have them since we can't guarantee that other users have checked for buggy implementations.

-vlad

#4 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 78 lines · On Thu, 10 Jan 2013 13:41:58 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 55 lines · Stephen Hemminger
Quoted 52 lines · On Wed, 9 Jan 2013 12:17:48 -0500 Vlad Yasevich <[email protected]> wrote:

/**
+ * vlan_hw_buggy - Check to see if VLAN hw acceleration is supported.
+ * @dev: netdevice of the lowerdev/hw nic
+ *
+ * Checks to see if HW and driver report VLAN acceleration correctly.
+ */

include/linux/if_vlan.h +45 -0
+static inline bool vlan_hw_buggy(const struct net_device *dev)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid))
+		return true;
+
+	return false;
+}
+
+/**
+ * vlan_vid_add_hw - Add the VLAN vid to the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Inserts the vid into the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_add_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_add_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
+ * vlan_vid_del_hw - Delete the VLAN vid from the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Delete the vid from the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_del_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
Quoted 8 lines

include/linux/if_vlan.h static inline bool vlan_uses_dev(const struct net_device *dev) · line 216

Quoted 6 lines
include/linux/if_vlan.h +6 -0
+	    ops->ndo_vlan_rx_kill_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+

I would rather not have all these inline's. This isn't performance critical.

I kind of need to keep them as inlines because of the VLAN support is built. Right now, none of the VLAN files are build if VLAN support is turned off. So all we get access to are inlines from if_vlan.h.

I suppose I can change how VLANs get built, but not if that's the right thing. It looks like it is set up the way it is on purpose.

Quoted 5 lines

Also, the check for buggy devices should be done inside the vlan code, not repeated in the functions using the add/remove API. When device is registered the flag and add/kill should be checked, and if the device driver is buggy it should fail the register_netdevice.

Quoted 8 lines

Not sure what you mean here. I don't check if it's buggy again. I check that the device supports filter and the pointer is set. I does exactly what the code used to do. I suppose that the checks for valid function pointers may be a little redundant since otherwise vlan_hw_buggy() would have triggered, but it's safer to have them since we can't guarantee that other users have checked for buggy implementations.

-vlad

The best way to handle this is to add stubs for the unconfigure case, and include real code if configured.

I.e something like

#if IS_ENABLED(CONFIG_VLAN_8012Q)
extern int vlan_vid_add_hw(struct net_device *, unsigned short); extern int vlan_vid_del_hw(struct net_device *, unsigned short); #else
#define vlan_vid_add_hw(dev,vid) (-ENOTSUPP)
#define vlan_vid_del_hw(dev,vid) (-ENOTSUPP)
#endif

#5 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 95 lines · Stephen Hemminger
Quoted 78 lines · On Thu, 10 Jan 2013 13:41:58 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 55 lines · Stephen Hemminger
Quoted 52 lines · On Wed, 9 Jan 2013 12:17:48 -0500 Vlad Yasevich <[email protected]> wrote:
   /**

+ * vlan_hw_buggy - Check to see if VLAN hw acceleration is supported.
+ * @dev: netdevice of the lowerdev/hw nic
+ *
+ * Checks to see if HW and driver report VLAN acceleration correctly.
+ */

include/linux/if_vlan.h +45 -0
+static inline bool vlan_hw_buggy(const struct net_device *dev)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (!ops->ndo_vlan_rx_add_vid || !ops->ndo_vlan_rx_kill_vid))
+		return true;
+
+	return false;
+}
+
+/**
+ * vlan_vid_add_hw - Add the VLAN vid to the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Inserts the vid into the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_add_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    ops->ndo_vlan_rx_add_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+
+/**
+ * vlan_vid_del_hw - Delete the VLAN vid from the HW filter
+ * @dev: netdevice of the lowerdev/hw nic
+ * @vid: vlan id.
+ *
+ * Delete the vid from the HW vlan filter table if hw supports it.
+ */
+static inline int vlan_vid_del_hw(struct net_device *dev,
+				  unsigned short vid)
+{
+	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = 0;
+
+	if ((dev->features & NETIF_F_HW_VLAN_FILTER) &&
Quoted 8 lines

include/linux/if_vlan.h static inline bool vlan_uses_dev(const struct net_device *dev) · line 216

Quoted 6 lines
include/linux/if_vlan.h +6 -0
+	    ops->ndo_vlan_rx_kill_vid)
+		err = ops->ndo_vlan_rx_add_vid(dev, vid);
+
+	return err;
+}
+

I would rather not have all these inline's. This isn't performance critical.

I kind of need to keep them as inlines because of the VLAN support is built. Right now, none of the VLAN files are build if VLAN support is turned off. So all we get access to are inlines from if_vlan.h.

I suppose I can change how VLANs get built, but not if that's the right thing. It looks like it is set up the way it is on purpose.

Quoted 5 lines

Also, the check for buggy devices should be done inside the vlan code, not repeated in the functions using the add/remove API. When device is registered the flag and add/kill should be checked, and if the device driver is buggy it should fail the register_netdevice.

Quoted 8 lines

Not sure what you mean here. I don't check if it's buggy again. I check that the device supports filter and the pointer is set. I does exactly what the code used to do. I suppose that the checks for valid function pointers may be a little redundant since otherwise vlan_hw_buggy() would have triggered, but it's safer to have them since we can't guarantee that other users have checked for buggy implementations.

-vlad

The best way to handle this is to add stubs for the unconfigure case, and include real code if configured.

I.e something like

Quoted 9 lines

#if IS_ENABLED(CONFIG_VLAN_8012Q)
extern int vlan_vid_add_hw(struct net_device *, unsigned short); extern int vlan_vid_del_hw(struct net_device *, unsigned short); #else
#define vlan_vid_add_hw(dev,vid) (-ENOTSUPP)
#define vlan_vid_del_hw(dev,vid) (-ENOTSUPP)
#endif

But that wouldn't be right as this would prevent HW filtering from working when VLAN support isn't built in which defeats the whole point of extracting this code out it its own functions so it can be re-used.

Either we always build in some parts of VLAN support or we make keep these inlines.

-vlad

Quoted 1 line
#6 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

What I think is the least intrusive and allows for maximum flexibility is having the VLAN bridge filtering depend on VLAN support (CONFIG_VLAN_8021Q). There already is drivers that depend on that value to enable filtering.

And make the support of VLAN filtering in the bridge conditional like IGMP snooping is optional

net/bridge/Kconfig +13 -0
@@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING
          Say N to exclude this support and reduce the binary size.
 
          If unsure, say Y.
+
+config BRIDGE_VLAN_FILTERING
+       bool "VLAN filtering"
+       depends on BRIDGE
+       depends on VLAN_8021Q
+       default n
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able to
+        selectively filter traffic based on VLAN tag.
+
+        Say N to exclude this support and reduce the binary size.
+
+        If unsure, say Y.
#7 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 4 lines · Stephen Hemminger

What I think is the least intrusive and allows for maximum flexibility is having the VLAN bridge filtering depend on VLAN support (CONFIG_VLAN_8021Q). There already is drivers that depend on that value to enable filtering.

The only thing that I see depending on CONFIG_VLAN_8021Q is CONFIG_VLAN_8021Q_GVRP which is part of the 8021Q support. There are currently no other drivers depending on 8021Q functionality
and vlan filtering in drivers doesn't depend on 8021Q support in
the kernel.

I admit that I've thought of having a dependency on 8021Q as it would have allowed me to re-use a bit more code, but decided that bridge should be able to stand on its own in this regard. 8021Q is not necessary to turn on VLAN accelerated filtering on the nics as anyone can do it through the ndo_vlan_rx_add_vid() call.

The reason for this patch was to make the nic vlan filter code reusable and address Jiri Pirko's comment in the V2 series.
(http://marc.info/?l=linux-netdev&m=135590565719164&w=2). This way, bridge wouldn't need to make direct ndo_ calls and all call sights will be consistent.

Quoted 2 lines

And make the support of VLAN filtering in the bridge conditional like IGMP snooping is optional

I could certainly make the VLAN filtering conditional, but I am not sure what it would buy us other then a lot of ifdefs.

Thanks
-vlad

Quoted 21 lines
net/bridge/Kconfig +13 -0
@@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING
           Say N to exclude this support and reduce the binary size.
 
           If unsure, say Y.
+
+config BRIDGE_VLAN_FILTERING
+       bool "VLAN filtering"
+       depends on BRIDGE
+       depends on VLAN_8021Q
+       default n
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able to
+        selectively filter traffic based on VLAN tag.
+
+        Say N to exclude this support and reduce the binary size.
+
+        If unsure, say Y.
#8 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 39 lines · On Fri, 11 Jan 2013 12:41:48 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 4 lines · Stephen Hemminger

What I think is the least intrusive and allows for maximum flexibility is having the VLAN bridge filtering depend on VLAN support (CONFIG_VLAN_8021Q). There already is drivers that depend on that value to enable filtering.

The only thing that I see depending on CONFIG_VLAN_8021Q is CONFIG_VLAN_8021Q_GVRP which is part of the 8021Q support. There are currently no other drivers depending on 8021Q functionality and vlan filtering in drivers doesn't depend on 8021Q support in the kernel.

I admit that I've thought of having a dependency on 8021Q as it would have allowed me to re-use a bit more code, but decided that bridge should be able to stand on its own in this regard. 8021Q is not necessary to turn on VLAN accelerated filtering on the nics as anyone can do it through the ndo_vlan_rx_add_vid() call.

The reason for this patch was to make the nic vlan filter code reusable and address Jiri Pirko's comment in the V2 series.
(http://marc.info/?l=linux-netdev&m=135590565719164&w=2). This way, bridge wouldn't need to make direct ndo_ calls and all call sights will be consistent.

Quoted 2 lines

And make the support of VLAN filtering in the bridge conditional like IGMP snooping is optional

I could certainly make the VLAN filtering conditional, but I am not sure what it would buy us other then a lot of ifdefs.

Thanks
-vlad

Quoted 6 lines
net/bridge/Kconfig +0 -0
@@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING
           Say N to exclude this support and reduce the binary size.
 
Quoted 16 lines
Quoted 5 lines
net/bridge/Kconfig +3 -0
           If unsure, say Y.
+
+config BRIDGE_VLAN_FILTERING
+       bool "VLAN filtering"

net/bridge/Kconfig config BRIDGE_IGMP_SNOOPING · line 61

Quoted 10 lines
net/bridge/Kconfig +10 -0
+       depends on BRIDGE
+       depends on VLAN_8021Q
+       default n
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able to
+        selectively filter traffic based on VLAN tag.
+
+        Say N to exclude this support and reduce the binary size.
+
+        If unsure, say Y.

Doing the following shows several drivers that still depend on VLAN_8021Q being enabled to do VLAN tagging.

$ git grep -l CONFIG_VLAN_8021Q
ethernet/3com/3c59x.c
ethernet/adaptec/starfire.c
ethernet/amd/amd8111e.c
ethernet/broadcom/cnic.c
ethernet/broadcom/tg3.c
ethernet/dlink/sundance.c
ethernet/natsemi/ns83820.c
ethernet/sis/sis900.c
ethernet/sis/sis900.h
ethernet/stmicro/stmmac/common.h
#9 lore raw

Re: [PATCH net-next v5 01/14] vlan: wrap hw-acceleration calls in separate functions.

Quoted 61 lines · Stephen Hemminger
Quoted 39 lines · On Fri, 11 Jan 2013 12:41:48 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 4 lines · Stephen Hemminger

What I think is the least intrusive and allows for maximum flexibility is having the VLAN bridge filtering depend on VLAN support (CONFIG_VLAN_8021Q). There already is drivers that depend on that value to enable filtering.

The only thing that I see depending on CONFIG_VLAN_8021Q is CONFIG_VLAN_8021Q_GVRP which is part of the 8021Q support. There are currently no other drivers depending on 8021Q functionality and vlan filtering in drivers doesn't depend on 8021Q support in the kernel.

I admit that I've thought of having a dependency on 8021Q as it would have allowed me to re-use a bit more code, but decided that bridge should be able to stand on its own in this regard. 8021Q is not necessary to turn on VLAN accelerated filtering on the nics as anyone can do it through the ndo_vlan_rx_add_vid() call.

The reason for this patch was to make the nic vlan filter code reusable and address Jiri Pirko's comment in the V2 series.
(http://marc.info/?l=linux-netdev&m=135590565719164&w=2). This way, bridge wouldn't need to make direct ndo_ calls and all call sights will be consistent.

Quoted 2 lines

And make the support of VLAN filtering in the bridge conditional like IGMP snooping is optional

I could certainly make the VLAN filtering conditional, but I am not sure what it would buy us other then a lot of ifdefs.

Thanks
-vlad

Quoted 6 lines
net/bridge/Kconfig +0 -0
@@ -46,3 +46,17 @@ config BRIDGE_IGMP_SNOOPING
            Say N to exclude this support and reduce the binary size.
 
Quoted 16 lines
Quoted 5 lines
net/bridge/Kconfig +3 -0
            If unsure, say Y.
+
+config BRIDGE_VLAN_FILTERING
+       bool "VLAN filtering"

net/bridge/Kconfig config BRIDGE_IGMP_SNOOPING · line 61

Quoted 10 lines
net/bridge/Kconfig +10 -0
+       depends on BRIDGE
+       depends on VLAN_8021Q
+       default n
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able to
+        selectively filter traffic based on VLAN tag.
+
+        Say N to exclude this support and reduce the binary size.
+
+        If unsure, say Y.

Doing the following shows several drivers that still depend on VLAN_8021Q being enabled to do VLAN tagging.

Quoted 11 lines
$ git grep -l CONFIG_VLAN_8021Q
ethernet/3com/3c59x.c
ethernet/adaptec/starfire.c
ethernet/amd/amd8111e.c
ethernet/broadcom/cnic.c
ethernet/broadcom/tg3.c
ethernet/dlink/sundance.c
ethernet/natsemi/ns83820.c
ethernet/sis/sis900.c
ethernet/sis/sis900.h
ethernet/stmicro/stmmac/common.h

OK. You've convinced me. I can make my code depend on 8021Q and move these functions into vlan module. I'll update the series with these changes.

-vlad

#10 lore raw

PATCH v5 2/14 bridge: Add vlan filtering infrastructure

In reply to Vlad Yasevich

This is an infrastructure patch. It adds 2 structures types:
net_bridge_vlan - list element of all vlans that have been configured
on the bridge.
net_port_vlan - list element of all vlans configured on a specific port.
references net_bridge_vlan.

In this implementation, bridge has a hash list of all vlans that have been added to the bridge. Each vlan element holds a vid and port_bitmap where each port sets its bit if a given vlan is added to the port.

Each port has its own list of vlans. Each element here refrences a vlan from the bridge list.

Write access to both lists is protected by RTNL, and read access is protected by RCU.

---
 net/bridge/br_device.c  |    5 +
 net/bridge/br_if.c      |  223 +++++++++++++++++++++++++++++++++++++++++++++++
 net/bridge/br_private.h |   57 ++++++++++++
 3 files changed, 285 insertions(+), 0 deletions(-)
net/bridge/br_device.c +5 -0
index e1bc090..b64b5c8 100644
@@ -331,6 +331,7 @@ static struct device_type br_type = {
 void br_dev_setup(struct net_device *dev)
 {
 	struct net_bridge *br = netdev_priv(dev);
+	int i;
 
 	eth_hw_addr_random(dev);
 	ether_setup(dev);
@@ -353,6 +354,8 @@ void br_dev_setup(struct net_device *dev)
 	spin_lock_init(&br->lock);
 	INIT_LIST_HEAD(&br->port_list);
 	spin_lock_init(&br->hash_lock);
+	for (i = 0; i < BR_VID_HASH_SIZE; i++)
+		INIT_HLIST_HEAD(&br->vlan_hlist[i]);
 
 	br->bridge_id.prio[0] = 0x80;
 	br->bridge_id.prio[1] = 0x00;
@@ -367,6 +370,8 @@ void br_dev_setup(struct net_device *dev)
 	br->bridge_hello_time = br->hello_time = 2 * HZ;
 	br->bridge_forward_delay = br->forward_delay = 15 * HZ;
 	br->ageing_time = 300 * HZ;
+	br->vlan_info.port_idx = 0;
+	INIT_LIST_HEAD(&br->vlan_info.vlan_list);
 
 	br_netfilter_rtable_init(br);
 	br_stp_timer_init(br);
net/bridge/br_if.c +223 -0

253 lines not on this page · raw message

net/bridge/br_private.h +57 -0

101 lines not on this page · raw message

Signature · 1 line
1.7.7.6
#11 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

This patch has some minor whitespace and spelling errors:

WARNING: line over 80 characters
#429: FILE: net/bridge/br_private.h:205:
+static inline struct net_bridge_port *vlans_to_port(struct net_port_vlans *vlans)

ERROR: trailing whitespace
#432: FILE: net/bridge/br_private.h:208:
+ $

WARNING: please, no spaces at the start of a line
#432: FILE: net/bridge/br_private.h:208:
+ $

+/* Must be protected by RTNL */
+static void br_vlan_del(struct net_bridge_vlan *vlan)

+ /* Drop the self-ref to trigger descrution. */

                                        ^^^^^^^^^^

Also, the data structure vlan's seems inverted. Why do you keep a hash list of vlan's and then a bitmap of ports. Seems more natural to just put a bitmap on each port that has vlan filtering rather than introducing yet another list to manage.

#12 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

Quoted 13 lines · Stephen Hemminger

This patch has some minor whitespace and spelling errors:

WARNING: line over 80 characters
#429: FILE: net/bridge/br_private.h:205:
+static inline struct net_bridge_port *vlans_to_port(struct net_port_vlans *vlans)

ERROR: trailing whitespace
#432: FILE: net/bridge/br_private.h:208:
+ $

WARNING: please, no spaces at the start of a line
#432: FILE: net/bridge/br_private.h:208:

net/bridge/br_if.c void br_port_carrier_check(struct net_bridge_port *p)

Quoted 7 lines
net/bridge/br_if.c +4 -0
+       $
 
+/* Must be protected by RTNL */
+static void br_vlan_del(struct net_bridge_vlan *vlan)
 
+	/* Drop the self-ref to trigger descrution. */
                                         ^^^^^^^^^^

sorry, will fix. I thought I ran everything through checkpatch. I'll re-run them.

Quoted 5 lines

Also, the data structure vlan's seems inverted. Why do you keep a hash list of vlan's and then a bitmap of ports. Seems more natural to just put a bitmap on each port that has vlan filtering rather than introducing yet another list to manage.

I originally had it this way. I found that it wasted space and made other things more difficult to do. For instance, to do egress policy, I would have needed another bitmap of vlans... With 4096 vlans, that's 512 bytes per port (1024 with policy).

I could probably remove the per-port list. It would make 2 things a little harder:
1) detecting if the port has any vlan info at all.
2) dumping the vlan information

I could pursue this if you think it'll be better.

-vlad

#13 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

Quoted 40 lines · Vlad Yasevich
Quoted 14 lines · Stephen Hemminger

This patch has some minor whitespace and spelling errors:

WARNING: line over 80 characters
#429: FILE: net/bridge/br_private.h:205:
+static inline struct net_bridge_port *vlans_to_port(struct net_port_vlans *vlans)

ERROR: trailing whitespace
#432: FILE: net/bridge/br_private.h:208:
+ $

WARNING: please, no spaces at the start of a line
#432: FILE: net/bridge/br_private.h:208:

net/bridge/br_if.c void br_port_carrier_check(struct net_bridge_port *p)

Quoted 7 lines
net/bridge/br_if.c +4 -0
+       $
 
+/* Must be protected by RTNL */
+static void br_vlan_del(struct net_bridge_vlan *vlan)
 
+    /* Drop the self-ref to trigger descrution. */
                                         ^^^^^^^^^^

sorry, will fix. I thought I ran everything through checkpatch. I'll re-run them.

Quoted 8 lines

Also, the data structure vlan's seems inverted. Why do you keep a hash list
of vlan's and then a bitmap of ports. Seems more natural to just put a bitmap
on each port that has vlan filtering rather than introducing yet another list
to manage.

I originally had it this way. I found that it wasted space and made other things more difficult to do. For instance, to do egress policy, I would have needed another bitmap of vlans... With 4096 vlans, that's 512 bytes per port (1024 with policy).

Quoted 4 lines

I could probably remove the per-port list. It would make 2 things a little harder:
1) detecting if the port has any vlan info at all.
2) dumping the vlan information

One other thing would become a little more difficult. fdb management for manually added neighbors.

-vlad

Quoted 4 lines

I could pursue this if you think it'll be better.

-vlad

#14 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

The problem with your approach is that it
adds a hash lookup in the packet process critical path.

Also the concept of different filters for egress vs ingress is feature madness. It doesn't make sense to have half-duplex connectivity.

#15 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

Quoted 3 lines · Stephen Hemminger

The problem with your approach is that it
adds a hash lookup in the packet process critical path.

Right now it is a list lookup and only happens if there is VLAN filtering configured. Shmulik argued that hash lookup would be faster, and that would be true for large number of vlans. List works better for smaller number of vlans.

Something to keep in mind is that this only happens if a port has a vlan configuration. Out of the box, the cost is that of a

	if (list_empty())

statement.

Quoted 3 lines

Also the concept of different filters for egress vs ingress is feature madness. It doesn't make sense to have half-duplex connectivity.

I am of the same opinion, but it actually simplified the code quite a bit, but at the cost of additional memory footprint. If you find this very objectionable, I can easily remove it.

Thanks
-vlad

#16 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

Hi,

Quoted 7 lines · On Thu, 10 Jan 2013 20:14:01 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 2 lines · Stephen Hemminger

Also the concept of different filters for egress vs ingress is feature madness. It doesn't make sense to have half-duplex connectivity.

I am of the same opinion, but it actually simplified the code quite a bit, but at the cost of additional memory footprint. If you find this very objectionable, I can easily remove it.

Haven't looked on the V5 series yet, but just to clarify:

There's *no* different membership _filter_ for egress vs ingress. The vlan's membership map is consulted on both ingress and egress.

However, upon egress, a vlan egress _policy_ should be applied, which determines whether the frame should egress tagged/untagged on the egress port.

The expected logic in detailed in [1] (please read "steps 1..5"). and the data structures needed are:
- per port: PVID
- per VLAN: port membership map
- per VLAN: port egress policy map

Altough on 1st look it might look mad ;-)
But, this is genuinely simple, highly configurable and allows great flexibility (IMO with no additional code complexity; Vlad can probably comment).

The motivation is to be aligned with behavior and configurability of vlan switches.

Regards,
Shmulik

[1]
http://marc.info/?l=linux-netdev&m=135603447030826&w=2

#17 lore raw

Re: [PATCH net-next v5 02/14] bridge: Add vlan filtering infrastructure

Quoted 7 lines · Shmulik Ladkani

Hi,

Quoted 4 lines · On Thu, 10 Jan 2013 20:14:01 -0500 Vlad Yasevich <[email protected]> wrote:
Quoted 2 lines · Stephen Hemminger

Also the concept of different filters for egress vs ingress is feature madness. It doesn't make sense to have half-duplex connectivity.

Quoted 8 lines
Quoted 3 lines

I am of the same opinion, but it actually simplified the code quite a bit, but at the cost of additional memory footprint. If you find this very objectionable, I can easily remove it.

Haven't looked on the V5 series yet, but just to clarify:

There's *no* different membership _filter_ for egress vs ingress. The vlan's membership map is consulted on both ingress and egress.

Right.

Quoted 4 lines

However, upon egress, a vlan egress _policy_ should be applied, which determines whether the frame should egress tagged/untagged on the egress port.

Right. This is how it is implemented in this series and this is what Stephen finds "mad". You can configure the policy that on egress the packet is untagged, but on ingress it has to be tagged. This kind of half-duplex configuration is very prone to errors.

-vlad

Quoted 21 lines

The expected logic in detailed in [1] (please read "steps 1..5"). and the data structures needed are:
- per port: PVID
- per VLAN: port membership map
- per VLAN: port egress policy map

Altough on 1st look it might look mad ;-)
But, this is genuinely simple, highly configurable and allows great flexibility (IMO with no additional code complexity; Vlad can probably comment).

The motivation is to be aligned with behavior and configurability of vlan switches.

Regards,
Shmulik

[1]
http://marc.info/?l=linux-netdev&m=135603447030826&w=2

#18 lore raw

PATCH v5 3/14 bridge: Validate that vlan is permitted on ingress

In reply to Vlad Yasevich

When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge.

---
 net/bridge/br_device.c  |    3 +++
 net/bridge/br_input.c   |   23 +++++++++++++++++++++++
 net/bridge/br_private.h |   14 ++++++++++++++
 3 files changed, 40 insertions(+), 0 deletions(-)
net/bridge/br_device.c +3 -0
index b64b5c8..6b8f816 100644
@@ -45,6 +45,9 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 	brstats->tx_bytes += skb->len;
 	u64_stats_update_end(&brstats->syncp);
 
+	if (!br_allowed_ingress(&br->vlan_info, skb))
+		goto out;
+
 	BR_INPUT_SKB_CB(skb)->brdev = dev;
 
 	skb_reset_mac_header(skb);
net/bridge/br_input.c +23 -0
index 4b34207..306841d 100644
@@ -17,6 +17,7 @@
 #include <linux/etherdevice.h>
 #include <linux/netfilter_bridge.h>
 #include <linux/export.h>
+#include <linux/rculist.h>
 #include "br_private.h"
 
 /* Hook for brouter */
@@ -41,6 +42,25 @@ static int br_pass_frame_up(struct sk_buff *skb)
 		       netif_receive_skb);
 }
 
+bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb)
+{
+	struct net_port_vlan *pve;
+	u16 vid;
+
+	/* If there are no vlan in the permitted list, all packets are
+	 * permitted.
+	 */
+	if (list_empty(&v->vlan_list))
+		return true;
+
+	vid = br_get_vlan(skb);
+	pve = nbp_vlan_find(v, vid);
+	if (pve)
+		return true;
+
+	return false;
+}
+
 /* note: already called with rcu_read_lock */
 int br_handle_frame_finish(struct sk_buff *skb)
 {
@@ -54,6 +74,9 @@ int br_handle_frame_finish(struct sk_buff *skb)
 	if (!p || p->state == BR_STATE_DISABLED)
 		goto drop;
 
+	if (!br_allowed_ingress(&p->vlan_info, skb))
+		goto drop;
+
 	/* insert into forwarding database after filtering to avoid spoofing */
 	br = p->br;
 	br_fdb_update(br, p, eth_hdr(skb)->h_source);
net/bridge/br_private.h +14 -0
index 01089c3..514538d 100644
@@ -212,6 +212,19 @@ static inline struct net_bridge_port *vlans_to_port(struct net_port_vlans *vlans
 	return p;
 }
 
+static inline u16 br_get_vlan(const struct sk_buff *skb)
+{
+	u16 tag;
+
+	if (vlan_tx_tag_present(skb))
+		return vlan_tx_tag_get(skb) & VLAN_VID_MASK;
+
+	if (vlan_get_tag(skb, &tag))
+		return 0;
+
+	return tag & VLAN_VID_MASK;
+}
+
 struct br_cpu_netstats {
 	u64			rx_packets;
 	u64			rx_bytes;
@@ -460,6 +473,7 @@ extern struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v,
 					   u16 vid);
 
 /* br_input.c */
+extern bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb);
 extern int br_handle_frame_finish(struct sk_buff *skb);
 extern rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
 
Signature · 1 line
1.7.7.6
#19 lore raw

PATCH v5 4/14 bridge: Verify that a vlan is allowed to egress on give port

In reply to Vlad Yasevich

When bridge forwards a frame, make sure that a frame is allowed to egress on that port.

---
 net/bridge/br_forward.c |   18 ++++++++++++++++++
 net/bridge/br_input.c   |   10 ++++++++++
 net/bridge/br_private.h |    3 +++
 3 files changed, 31 insertions(+), 0 deletions(-)
net/bridge/br_forward.c +18 -0
index 02015a5..3e9a705 100644
@@ -26,11 +26,29 @@ static int deliver_clone(const struct net_bridge_port *prev,
 			 void (*__packet_hook)(const struct net_bridge_port *p,
 					       struct sk_buff *skb));
 
+bool br_allowed_egress(const struct net_port_vlans *v,
+		       const struct sk_buff *skb)
+{
+	struct net_port_vlan *pve;
+	u16 vid;
+
+	if (list_empty(&v->vlan_list))
+		return true;
+
+	vid = br_get_vlan(skb);
+	pve = nbp_vlan_find(v, vid);
+	if (pve)
+		return true;
+
+	return false;
+}
+
 /* Don't forward packets to originating port or forwarding diasabled */
 static inline int should_deliver(const struct net_bridge_port *p,
 				 const struct sk_buff *skb)
 {
 	return (((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev) &&
+		br_allowed_egress(&p->vlan_info, skb) &&
 		p->state == BR_STATE_FORWARDING);
 }
 
net/bridge/br_input.c +10 -0
index 306841d..72a333c 100644
@@ -35,6 +35,16 @@ static int br_pass_frame_up(struct sk_buff *skb)
 	brstats->rx_bytes += skb->len;
 	u64_stats_update_end(&brstats->syncp);
 
+	/* Bridge is just like any other port.  Make sure the
+	 * packet is allowed except in promisc modue when someone
+	 * may be running packet capture.
+	 */
+	if (!(brdev->flags & IFF_PROMISC) &&
+	    !br_allowed_egress(&br->vlan_info, skb)) {
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
 	indev = skb->dev;
 	skb->dev = brdev;
 
net/bridge/br_private.h +3 -0
index 514538d..cf5982e 100644
@@ -219,6 +219,7 @@ static inline u16 br_get_vlan(const struct sk_buff *skb)
 	if (vlan_tx_tag_present(skb))
 		return vlan_tx_tag_get(skb) & VLAN_VID_MASK;
 
+	/* Untagged and VLAN 0 traffic is handled the same way */
 	if (vlan_get_tag(skb, &tag))
 		return 0;
 
@@ -453,6 +454,8 @@ extern int br_forward_finish(struct sk_buff *skb);
 extern void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb);
 extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
 			     struct sk_buff *skb2);
+extern bool br_allowed_egress(const struct net_port_vlans *v,
+			      const struct sk_buff *skb);
 
 /* br_if.c */
 extern void br_port_carrier_check(struct net_bridge_port *p);
Signature · 1 line
1.7.7.6
#20 lore raw

PATCH v5 5/14 bridge: Cache vlan in the cb for faster egress lookup.

In reply to Vlad Yasevich

On input, cache the pointer to the bridge vlan info, so that on egress, we have can simply look at the port bitmap instead of traversing a vlan list.

---
 net/bridge/br_forward.c |   14 ++++++++++++++
 net/bridge/br_input.c   |    6 +++++-
 net/bridge/br_private.h |    1 +
 3 files changed, 20 insertions(+), 1 deletions(-)
net/bridge/br_forward.c +14 -0
index 3e9a705..d95a30f 100644
@@ -30,11 +30,25 @@ bool br_allowed_egress(const struct net_port_vlans *v,
 		       const struct sk_buff *skb)
 {
 	struct net_port_vlan *pve;
+	struct net_bridge_vlan *vlan = NULL;
 	u16 vid;
 
 	if (list_empty(&v->vlan_list))
 		return true;
 
+	vlan = BR_INPUT_SKB_CB(skb)->vlan;
+	if (vlan) {
+		/* If we have cached VLAN information, use port_bitmap
+		 * of the vlan to make the decision
+		 */
+		if (test_bit(v->port_idx, vlan->port_bitmap))
+			return true;
+		return false;
+	}
+
+	/* We don't have cached vlan information, so we need to do
+	 * it the hard way.
+	 */
 	vid = br_get_vlan(skb);
 	pve = nbp_vlan_find(v, vid);
 	if (pve)
net/bridge/br_input.c +5 -1
index 72a333c..50b97b8 100644
@@ -57,6 +57,8 @@ bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb)
 	struct net_port_vlan *pve;
 	u16 vid;
 
+	BR_INPUT_SKB_CB(skb)->vlan = NULL;
+
 	/* If there are no vlan in the permitted list, all packets are
 	 * permitted.
 	 */
@@ -65,8 +67,10 @@ bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb)
 
 	vid = br_get_vlan(skb);
 	pve = nbp_vlan_find(v, vid);
-	if (pve)
+	if (pve) {
+		BR_INPUT_SKB_CB(skb)->vlan = rcu_dereference(pve->vlan);
 		return true;
+	}
 
 	return false;
 }
net/bridge/br_private.h +1 -0
index cf5982e..6b92118 100644
@@ -330,6 +330,7 @@ static inline struct net_bridge *vlans_to_bridge(struct net_port_vlans *vlans)
 
 struct br_input_skb_cb {
 	struct net_device *brdev;
+	struct net_bridge_vlan *vlan;
 #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
 	int igmp;
 	int mrouters_only;
Signature · 1 line
1.7.7.6
#21 lore raw

PATCH v5 6/14 bridge: Add vlan to unicast fdb entries

In reply to Vlad Yasevich

This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match.

---
 include/uapi/linux/if_bridge.h |    2 +-
 net/bridge/br_device.c         |    5 ++-
 net/bridge/br_fdb.c            |   70 +++++++++++++++++++++++----------------
 net/bridge/br_input.c          |   17 +++++----
 net/bridge/br_private.h        |   10 ++++--
 5 files changed, 61 insertions(+), 43 deletions(-)
include/uapi/linux/if_bridge.h +1 -1
index 5db2975..4115db1 100644
@@ -94,7 +94,7 @@ struct __fdb_entry {
 	__u32 ageing_timer_value;
 	__u8 port_hi;
 	__u8 pad0;
-	__u16 unused;
+	__u16 fdb_vid;
 };
 
 /* Bridge Flags */
net/bridge/br_device.c +3 -2
index 6b8f816..5dd6b40 100644
@@ -30,6 +30,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct net_bridge_fdb_entry *dst;
 	struct net_bridge_mdb_entry *mdst;
 	struct br_cpu_netstats *brstats = this_cpu_ptr(br->stats);
+	u16 vid;
 
 	rcu_read_lock();
 #ifdef CONFIG_BRIDGE_NETFILTER
@@ -45,7 +46,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 	brstats->tx_bytes += skb->len;
 	u64_stats_update_end(&brstats->syncp);
 
-	if (!br_allowed_ingress(&br->vlan_info, skb))
+	if (!br_allowed_ingress(&br->vlan_info, skb, &vid))
 		goto out;
 
 	BR_INPUT_SKB_CB(skb)->brdev = dev;
@@ -70,7 +71,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 			br_multicast_deliver(mdst, skb);
 		else
 			br_flood_deliver(br, skb);
-	} else if ((dst = __br_fdb_get(br, dest)) != NULL)
+	} else if ((dst = __br_fdb_get(br, dest, vid)) != NULL)
 		br_deliver(dst->dst, skb);
 	else
 		br_flood_deliver(br, skb);
net/bridge/br_fdb.c +41 -29

213 lines not on this page · raw message

net/bridge/br_input.c +9 -8
index 50b97b8..62173a5 100644
@@ -52,10 +52,9 @@ static int br_pass_frame_up(struct sk_buff *skb)
 		       netif_receive_skb);
 }
 
-bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb)
+bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb, u16 *vid)
 {
 	struct net_port_vlan *pve;
-	u16 vid;
 
 	BR_INPUT_SKB_CB(skb)->vlan = NULL;
 
@@ -65,8 +64,8 @@ bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb)
 	if (list_empty(&v->vlan_list))
 		return true;
 
-	vid = br_get_vlan(skb);
-	pve = nbp_vlan_find(v, vid);
+	*vid = br_get_vlan(skb);
+	pve = nbp_vlan_find(v, *vid);
 	if (pve) {
 		BR_INPUT_SKB_CB(skb)->vlan = rcu_dereference(pve->vlan);
 		return true;
@@ -84,16 +83,17 @@ int br_handle_frame_finish(struct sk_buff *skb)
 	struct net_bridge_fdb_entry *dst;
 	struct net_bridge_mdb_entry *mdst;
 	struct sk_buff *skb2;
+	u16 vid = 0;
 
 	if (!p || p->state == BR_STATE_DISABLED)
 		goto drop;
 
-	if (!br_allowed_ingress(&p->vlan_info, skb))
+	if (!br_allowed_ingress(&p->vlan_info, skb, &vid))
 		goto drop;
 
 	/* insert into forwarding database after filtering to avoid spoofing */
 	br = p->br;
-	br_fdb_update(br, p, eth_hdr(skb)->h_source);
+	br_fdb_update(br, p, eth_hdr(skb)->h_source, vid);
 
 	if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) &&
 	    br_multicast_rcv(br, p, skb))
@@ -128,7 +128,8 @@ int br_handle_frame_finish(struct sk_buff *skb)
 			skb2 = skb;
 
 		br->dev->stats.multicast++;
-	} else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) {
+	} else if ((dst = __br_fdb_get(br, dest, vid)) &&
+			dst->is_local) {
 		skb2 = skb;
 		/* Do not forward the packet since it's local. */
 		skb = NULL;
@@ -157,7 +158,7 @@ static int br_handle_local_finish(struct sk_buff *skb)
 {
 	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
 
-	br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+	br_fdb_update(p->br, p, eth_hdr(skb)->h_source, br_get_vlan(skb));
 	return 0;	 /* process further */
 }
 
net/bridge/br_private.h +7 -3
index 6b92118..c5aacfc 100644
@@ -101,6 +101,7 @@ struct net_bridge_fdb_entry
 	mac_addr			addr;
 	unsigned char			is_local;
 	unsigned char			is_static;
+	__u16				vlan_id;
 };
 
 struct net_bridge_port_group {
@@ -422,7 +423,8 @@ extern void br_fdb_cleanup(unsigned long arg);
 extern void br_fdb_delete_by_port(struct net_bridge *br,
 				  const struct net_bridge_port *p, int do_all);
 extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
-						 const unsigned char *addr);
+						 const unsigned char *addr,
+						 __u16 vid);
 extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
 extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 			  unsigned long count, unsigned long off);
@@ -431,7 +433,8 @@ extern int br_fdb_insert(struct net_bridge *br,
 			 const unsigned char *addr);
 extern void br_fdb_update(struct net_bridge *br,
 			  struct net_bridge_port *source,
-			  const unsigned char *addr);
+			  const unsigned char *addr,
+			  u16 vid);
 
 extern int br_fdb_delete(struct ndmsg *ndm,
 			 struct net_device *dev,
@@ -477,7 +480,8 @@ extern struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v,
 					   u16 vid);
 
 /* br_input.c */
-extern bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb);
+extern bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb,
+			       u16 *vid);
 extern int br_handle_frame_finish(struct sk_buff *skb);
 extern rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
 
Signature · 1 line
1.7.7.6
#22 lore raw

PATCH v5 7/14 bridge: Add vlan id to multicast groups

In reply to Vlad Yasevich

Add vlan_id to multicasts groups so that we know which vlan each group belongs to and can correctly forward to appropriate vlan.

---
 net/bridge/br_multicast.c |   64 +++++++++++++++++++++++++++++++--------------
 net/bridge/br_private.h   |    1 +
 2 files changed, 45 insertions(+), 20 deletions(-)
net/bridge/br_multicast.c +44 -20
index 5391ca4..9c0ac97 100644
@@ -39,6 +39,8 @@ static inline int br_ip_equal(const struct br_ip *a, const struct br_ip *b)
 {
 	if (a->proto != b->proto)
 		return 0;
+	if (a->vid != b->vid)
+		return 0;
 	switch (a->proto) {
 	case htons(ETH_P_IP):
 		return a->u.ip4 == b->u.ip4;
@@ -50,16 +52,19 @@ static inline int br_ip_equal(const struct br_ip *a, const struct br_ip *b)
 	return 0;
 }
 
-static inline int __br_ip4_hash(struct net_bridge_mdb_htable *mdb, __be32 ip)
+static inline int __br_ip4_hash(struct net_bridge_mdb_htable *mdb, __be32 ip,
+				__u16 vid)
 {
-	return jhash_1word(mdb->secret, (__force u32)ip) & (mdb->max - 1);
+	return jhash_2words((__force u32)ip, vid, mdb->secret) & (mdb->max - 1);
 }
 
 #if IS_ENABLED(CONFIG_IPV6)
 static inline int __br_ip6_hash(struct net_bridge_mdb_htable *mdb,
-				const struct in6_addr *ip)
+				const struct in6_addr *ip,
+				__u16 vid)
 {
-	return jhash2((__force u32 *)ip->s6_addr32, 4, mdb->secret) & (mdb->max - 1);
+	return jhash_2words(ipv6_addr_hash(ip), vid,
+			    mdb->secret) & (mdb->max - 1);
 }
 #endif
 
@@ -68,10 +73,10 @@ static inline int br_ip_hash(struct net_bridge_mdb_htable *mdb,
 {
 	switch (ip->proto) {
 	case htons(ETH_P_IP):
-		return __br_ip4_hash(mdb, ip->u.ip4);
+		return __br_ip4_hash(mdb, ip->u.ip4, ip->vid);
 #if IS_ENABLED(CONFIG_IPV6)
 	case htons(ETH_P_IPV6):
-		return __br_ip6_hash(mdb, &ip->u.ip6);
+		return __br_ip6_hash(mdb, &ip->u.ip6, ip->vid);
 #endif
 	}
 	return 0;
@@ -101,24 +106,27 @@ struct net_bridge_mdb_entry *br_mdb_ip_get(struct net_bridge_mdb_htable *mdb,
 }
 
 static struct net_bridge_mdb_entry *br_mdb_ip4_get(
-	struct net_bridge_mdb_htable *mdb, __be32 dst)
+	struct net_bridge_mdb_htable *mdb, __be32 dst, __u16 vid)
 {
 	struct br_ip br_dst;
 
 	br_dst.u.ip4 = dst;
 	br_dst.proto = htons(ETH_P_IP);
+	br_dst.vid = vid;
 
 	return br_mdb_ip_get(mdb, &br_dst);
 }
 
 #if IS_ENABLED(CONFIG_IPV6)
 static struct net_bridge_mdb_entry *br_mdb_ip6_get(
-	struct net_bridge_mdb_htable *mdb, const struct in6_addr *dst)
+	struct net_bridge_mdb_htable *mdb, const struct in6_addr *dst,
+	__u16 vid)
 {
 	struct br_ip br_dst;
 
 	br_dst.u.ip6 = *dst;
 	br_dst.proto = htons(ETH_P_IPV6);
+	br_dst.vid = vid;
 
 	return br_mdb_ip_get(mdb, &br_dst);
 }
@@ -694,7 +702,8 @@ err:
 
 static int br_ip4_multicast_add_group(struct net_bridge *br,
 				      struct net_bridge_port *port,
-				      __be32 group)
+				      __be32 group,
+				      __u16 vid)
 {
 	struct br_ip br_group;
 
@@ -703,6 +712,7 @@ static int br_ip4_multicast_add_group(struct net_bridge *br,
 
 	br_group.u.ip4 = group;
 	br_group.proto = htons(ETH_P_IP);
+	br_group.vid = vid;
 
 	return br_multicast_add_group(br, port, &br_group);
 }
@@ -710,7 +720,8 @@ static int br_ip4_multicast_add_group(struct net_bridge *br,
 #if IS_ENABLED(CONFIG_IPV6)
 static int br_ip6_multicast_add_group(struct net_bridge *br,
 				      struct net_bridge_port *port,
-				      const struct in6_addr *group)
+				      const struct in6_addr *group,
+				      __u16 vid)
 {
 	struct br_ip br_group;
 
@@ -719,6 +730,7 @@ static int br_ip6_multicast_add_group(struct net_bridge *br,
 
 	br_group.u.ip6 = *group;
 	br_group.proto = htons(ETH_P_IPV6);
+	br_group.vid = vid;
 
 	return br_multicast_add_group(br, port, &br_group);
 }
@@ -930,7 +942,8 @@ static int br_ip4_multicast_igmp3_report(struct net_bridge *br,
 			continue;
 		}
 
-		err = br_ip4_multicast_add_group(br, port, group);
+		err = br_ip4_multicast_add_group(br, port, group,
+						 br_get_vlan(skb));
 		if (err)
 			break;
 	}
@@ -990,7 +1003,8 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br,
 			continue;
 		}
 
-		err = br_ip6_multicast_add_group(br, port, &grec->grec_mca);
+		err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
+						 br_get_vlan(skb));
 		if (!err)
 			break;
 	}
@@ -1108,7 +1122,8 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group);
+	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group,
+			    br_get_vlan(skb));
 	if (!mp)
 		goto out;
 
@@ -1180,7 +1195,8 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group);
+	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group,
+			    br_get_vlan(skb));
 	if (!mp)
 		goto out;
 
@@ -1286,7 +1302,8 @@ out:
 
 static void br_ip4_multicast_leave_group(struct net_bridge *br,
 					 struct net_bridge_port *port,
-					 __be32 group)
+					 __be32 group,
+					 __u16 vid)
 {
 	struct br_ip br_group;
 
@@ -1295,6 +1312,7 @@ static void br_ip4_multicast_leave_group(struct net_bridge *br,
 
 	br_group.u.ip4 = group;
 	br_group.proto = htons(ETH_P_IP);
+	br_group.vid = vid;
 
 	br_multicast_leave_group(br, port, &br_group);
 }
@@ -1302,7 +1320,8 @@ static void br_ip4_multicast_leave_group(struct net_bridge *br,
 #if IS_ENABLED(CONFIG_IPV6)
 static void br_ip6_multicast_leave_group(struct net_bridge *br,
 					 struct net_bridge_port *port,
-					 const struct in6_addr *group)
+					 const struct in6_addr *group,
+					 __u16 vid)
 {
 	struct br_ip br_group;
 
@@ -1311,6 +1330,7 @@ static void br_ip6_multicast_leave_group(struct net_bridge *br,
 
 	br_group.u.ip6 = *group;
 	br_group.proto = htons(ETH_P_IPV6);
+	br_group.vid = vid;
 
 	br_multicast_leave_group(br, port, &br_group);
 }
@@ -1393,7 +1413,8 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 	case IGMP_HOST_MEMBERSHIP_REPORT:
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-		err = br_ip4_multicast_add_group(br, port, ih->group);
+		err = br_ip4_multicast_add_group(br, port, ih->group,
+						 br_get_vlan(skb2));
 		break;
 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		err = br_ip4_multicast_igmp3_report(br, port, skb2);
@@ -1402,7 +1423,8 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 		err = br_ip4_multicast_query(br, port, skb2);
 		break;
 	case IGMP_HOST_LEAVE_MESSAGE:
-		br_ip4_multicast_leave_group(br, port, ih->group);
+		br_ip4_multicast_leave_group(br, port, ih->group,
+					     br_get_vlan(skb2));
 		break;
 	}
 
@@ -1522,7 +1544,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 		}
 		mld = (struct mld_msg *)skb_transport_header(skb2);
 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca);
+		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca,
+						 br_get_vlan(skb2));
 		break;
 	    }
 	case ICMPV6_MLD2_REPORT:
@@ -1539,7 +1562,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 			goto out;
 		}
 		mld = (struct mld_msg *)skb_transport_header(skb2);
-		br_ip6_multicast_leave_group(br, port, &mld->mld_mca);
+		br_ip6_multicast_leave_group(br, port, &mld->mld_mca,
+					     br_get_vlan(skb2));
 	    }
 	}
 
net/bridge/br_private.h +1 -0
index c5aacfc..45e4169 100644
@@ -63,6 +63,7 @@ struct br_ip
 #endif
 	} u;
 	__be16		proto;
+	__u16		vid;
 };
 
 #define BR_INVALID_VID	(1<<15)
Signature · 1 line
1.7.7.6
#23 lore raw

PATCH v5 8/14 bridge: Add netlink interface to configure vlans on bridge ports

In reply to Vlad Yasevich

Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message.

---
 include/linux/netdevice.h      |    2 +
 include/uapi/linux/if_bridge.h |    9 +++
 net/bridge/br_device.c         |    1 +
 net/bridge/br_if.c             |    1 +
 net/bridge/br_netlink.c        |  134 ++++++++++++++++++++++++++++++++++-----
 net/bridge/br_private.h        |    1 +
 net/core/rtnetlink.c           |   72 +++++++++++++++++++++
 7 files changed, 202 insertions(+), 18 deletions(-)
include/linux/netdevice.h +2 -0
index 0209ac3..3a68563 100644
@@ -1017,6 +1017,8 @@ struct net_device_ops {
 	int			(*ndo_bridge_getlink)(struct sk_buff *skb,
 						      u32 pid, u32 seq,
 						      struct net_device *dev);
+	int			(*ndo_bridge_dellink)(struct net_device *dev,
+						      struct nlmsghdr *nlh);
 	int			(*ndo_change_carrier)(struct net_device *dev,
 						      bool new_carrier);
 };
include/uapi/linux/if_bridge.h +9 -0
index 4115db1..2645d51 100644
@@ -108,15 +108,24 @@ struct __fdb_entry {
  * [IFLA_AF_SPEC] = {
  *     [IFLA_BRIDGE_FLAGS]
  *     [IFLA_BRIDGE_MODE]
+ *     [IFLA_BRIDGE_VLAN_INFO]
  * }
  */
 enum {
 	IFLA_BRIDGE_FLAGS,
 	IFLA_BRIDGE_MODE,
+	IFLA_BRIDGE_VLAN_INFO,
 	__IFLA_BRIDGE_MAX,
 };
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
 
+#define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
+
+struct bridge_vlan_info {
+	u16 flags;
+	u16 vid;
+};
+
 /* Bridge multicast database attributes
  * [MDBA_MDB] = {
  *     [MDBA_MDB_ENTRY] = {
net/bridge/br_device.c +1 -0
index 5dd6b40..e0814ce 100644
@@ -318,6 +318,7 @@ static const struct net_device_ops br_netdev_ops = {
 	.ndo_fdb_dump		 = br_fdb_dump,
 	.ndo_bridge_getlink	 = br_getlink,
 	.ndo_bridge_setlink	 = br_setlink,
+	.ndo_bridge_dellink	 = br_dellink,
 };
 
 static void br_dev_free(struct net_device *dev)
net/bridge/br_if.c +1 -0
index 3304b57..d8733e3 100644
@@ -23,6 +23,7 @@
 #include <linux/if_ether.h>
 #include <linux/slab.h>
 #include <net/sock.h>
+#include <linux/if_vlan.h>
 
 #include "br_private.h"
 
net/bridge/br_netlink.c +116 -18

188 lines not on this page · raw message

net/bridge/br_private.h +1 -0
index 45e4169..275f2a7 100644
@@ -668,6 +668,7 @@ extern int br_netlink_init(void);
 extern void br_netlink_fini(void);
 extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
 extern int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg);
+extern int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg);
 extern int br_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 		      struct net_device *dev);
 
net/core/rtnetlink.c +72 -0

84 lines not on this page · raw message

Signature · 1 line
1.7.7.6
#24 lore raw

PATCH v5 9/14 bridge: Add vlan support to static neighbors

In reply to Vlad Yasevich

When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If the list is empty, we use vlan 0 and only add 1 entry.

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    2 +-
 drivers/net/macvlan.c                         |    2 +-
 drivers/net/vxlan.c                           |    3 +-
 include/linux/netdevice.h                     |    1 +
 include/uapi/linux/neighbour.h                |    1 +
 net/bridge/br_fdb.c                           |  142 ++++++++++++++++++++++---
 net/bridge/br_if.c                            |    1 +
 net/bridge/br_private.h                       |    2 +-
 net/core/rtnetlink.c                          |   23 +++--
 9 files changed, 147 insertions(+), 30 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +1 -1
index 20a5af6..ec97efe 100644
@@ -6985,7 +6985,7 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 	return err;
 }
 
-static int ixgbe_ndo_fdb_del(struct ndmsg *ndm,
+static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
 			     struct net_device *dev,
 			     const unsigned char *addr)
 {
drivers/net/macvlan.c +1 -1
index 1047e58..3e16d74 100644
@@ -564,7 +564,7 @@ static int macvlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 	return err;
 }
 
-static int macvlan_fdb_del(struct ndmsg *ndm,
+static int macvlan_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
 			   struct net_device *dev,
 			   const unsigned char *addr)
 {
drivers/net/vxlan.c +2 -1
index 40f2cc1..c72540b 100644
@@ -392,7 +392,8 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 }
 
 /* Delete entry (via netlink) */
-static int vxlan_fdb_delete(struct ndmsg *ndm, struct net_device *dev,
+static int vxlan_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
+			    struct net_device *dev,
 			    const unsigned char *addr)
 {
 	struct vxlan_dev *vxlan = netdev_priv(dev);
include/linux/netdevice.h +1 -0
index 3a68563..eb7a45f 100644
@@ -1005,6 +1005,7 @@ struct net_device_ops {
 					       const unsigned char *addr,
 					       u16 flags);
 	int			(*ndo_fdb_del)(struct ndmsg *ndm,
+					       struct nlattr *tb[],
 					       struct net_device *dev,
 					       const unsigned char *addr);
 	int			(*ndo_fdb_dump)(struct sk_buff *skb,
include/uapi/linux/neighbour.h +1 -0
index 275e5d6..adb068c 100644
@@ -20,6 +20,7 @@ enum {
 	NDA_LLADDR,
 	NDA_CACHEINFO,
 	NDA_PROBES,
+	NDA_VLAN,
 	__NDA_MAX
 };
 
net/bridge/br_fdb.c +125 -17

206 lines not on this page · raw message

net/bridge/br_if.c +1 -0
index d8733e3..4878c20 100644
@@ -277,6 +277,7 @@ int nbp_vlan_delete(struct net_port_vlans *v, u16 vid)
 			pr_warn("failed to kill vid %d for device %s\n",
 				vid, dev->name);
 	}
+
 	pve->vid = BR_INVALID_VID;
 
 	vlan = rtnl_dereference(pve->vlan);
net/bridge/br_private.h +1 -1
index 275f2a7..9a5cdb2 100644
@@ -437,7 +437,7 @@ extern void br_fdb_update(struct net_bridge *br,
 			  const unsigned char *addr,
 			  u16 vid);
 
-extern int br_fdb_delete(struct ndmsg *ndm,
+extern int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
 			 struct net_device *dev,
 			 const unsigned char *addr);
 extern int br_fdb_add(struct ndmsg *nlh, struct nlattr *tb[],
net/core/rtnetlink.c +14 -9
index 1aba89f..87b07d8 100644
@@ -2122,7 +2122,7 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 {
 	struct net *net = sock_net(skb->sk);
 	struct ndmsg *ndm;
-	struct nlattr *llattr;
+	struct nlattr *tb[NDA_MAX+1];
 	struct net_device *dev;
 	int err = -EINVAL;
 	__u8 *addr;
@@ -2130,8 +2130,9 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	if (nlmsg_len(nlh) < sizeof(*ndm))
-		return -EINVAL;
+	err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX, NULL);
+	if (err < 0)
+		return err;
 
 	ndm = nlmsg_data(nlh);
 	if (ndm->ndm_ifindex == 0) {
@@ -2145,13 +2146,17 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 		return -ENODEV;
 	}
 
-	llattr = nlmsg_find_attr(nlh, sizeof(*ndm), NDA_LLADDR);
-	if (llattr == NULL || nla_len(llattr) != ETH_ALEN) {
-		pr_info("PF_BRIGDE: RTM_DELNEIGH with invalid address\n");
+	if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) {
+		pr_info("PF_BRIDGE: RTM_DELNEIGH with invalid address\n");
+		return -EINVAL;
+	}
+
+	addr = nla_data(tb[NDA_LLADDR]);
+	if (!is_valid_ether_addr(addr)) {
+		pr_info("PF_BRIDGE: RTM_DELNEIGH with invalid ether address\n");
 		return -EINVAL;
 	}
 
-	addr = nla_data(llattr);
 	err = -EOPNOTSUPP;
 
 	/* Support fdb on master device the net/bridge default case */
@@ -2161,7 +2166,7 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 		const struct net_device_ops *ops = br_dev->netdev_ops;
 
 		if (ops->ndo_fdb_del)
-			err = ops->ndo_fdb_del(ndm, dev, addr);
+			err = ops->ndo_fdb_del(ndm, tb, dev, addr);
 
 		if (err)
 			goto out;
@@ -2171,7 +2176,7 @@ static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 
 	/* Embedded bridge, macvlan, and any other device support */
 	if ((ndm->ndm_flags & NTF_SELF) && dev->netdev_ops->ndo_fdb_del) {
-		err = dev->netdev_ops->ndo_fdb_del(ndm, dev, addr);
+		err = dev->netdev_ops->ndo_fdb_del(ndm, tb, dev, addr);
 
 		if (!err) {
 			rtnl_fdb_notify(dev, addr, RTM_DELNEIGH);
Signature · 1 line
1.7.7.6
#25 lore raw

PATCH v5 10/14 bridge: Add the ability to configure pvid

In reply to Vlad Yasevich

A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind.

---
 include/uapi/linux/if_bridge.h |    1 +
 net/bridge/br_if.c             |   72 ++++++++++++++++++++++++++++++++++++++-
 net/bridge/br_netlink.c        |    4 +-
 net/bridge/br_private.h        |    3 +-
 4 files changed, 75 insertions(+), 5 deletions(-)
include/uapi/linux/if_bridge.h +1 -0
index 2645d51..875c9e2 100644
@@ -120,6 +120,7 @@ enum {
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
 
 #define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
+#define BRIDGE_VLAN_INFO_PVID	(1<<1)	/* VLAN is PVID, ingress untagged */
 
 struct bridge_vlan_info {
 	u16 flags;
net/bridge/br_if.c +70 -2

110 lines not on this page · raw message

net/bridge/br_netlink.c +2 -2
index 75f368c..1dbfcf3 100644
@@ -200,12 +200,12 @@ static int br_afspec(struct net_bridge *br,
 
 		switch (cmd) {
 		case RTM_SETLINK:
-			err = nbp_vlan_add(v, vinfo->vid);
+			err = nbp_vlan_add(v, vinfo->vid, vinfo->flags);
 			if (err)
 				break;
 			if (p && (vinfo->flags & BRIDGE_VLAN_INFO_MASTER)) {
 				err = nbp_vlan_add(&p->br->vlan_info,
-						   vinfo->vid);
+						   vinfo->vid, vinfo->flags);
 			}
 			break;
 
net/bridge/br_private.h +2 -1
index 9a5cdb2..bf00a5e 100644
@@ -89,6 +89,7 @@ struct net_port_vlan {
 struct net_port_vlans {
 	u16				port_idx;
 	struct list_head		vlan_list;
+	struct net_bridge_vlan __rcu	*pvlan;
 };
 
 struct net_bridge_fdb_entry
@@ -475,7 +476,7 @@ extern int br_min_mtu(const struct net_bridge *br);
 extern netdev_features_t br_features_recompute(struct net_bridge *br,
 	netdev_features_t features);
 extern struct net_bridge_vlan *br_vlan_find(struct net_bridge *br, u16 vid);
-extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid);
+extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags);
 extern int nbp_vlan_delete(struct net_port_vlans *v, u16 vid);
 extern struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v,
 					   u16 vid);
Signature · 1 line
1.7.7.6
#26 lore raw

PATCH v5 10/14 bridge: Add the ability to pvid

In reply to Vlad Yasevich

A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind.

---
 include/uapi/linux/if_bridge.h |    1 +
 net/bridge/br_if.c             |   77 +++++++++++++++++++++++++++++++++++++--
 net/bridge/br_netlink.c        |    9 +++--
 net/bridge/br_private.h        |    5 ++-
 4 files changed, 82 insertions(+), 10 deletions(-)
include/uapi/linux/if_bridge.h +1 -0
index 1bc9216..e5ea4cb 100644
@@ -120,6 +120,7 @@ enum {
 #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
 
 #define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
+#define BRIDGE_VLAN_INFO_PVID	(1<<1)	/* VLAN is PVID, ingress untagged */
 
 struct bridge_vlan_info {
 	u16 flags;
net/bridge/br_if.c +73 -4

121 lines not on this page · raw message

net/bridge/br_netlink.c +5 -4
index f365ac4..08692d1 100644
@@ -200,19 +200,20 @@ static int br_afspec(struct net_bridge *br,
 
 		switch (cmd) {
 		case RTM_SETLINK:
-			err = nbp_vlan_add(v, vinfo->vid);
+			err = nbp_vlan_add(v, vinfo->vid, vinfo->flags);
 			if (err)
 				break;
 			if (p && (vinfo->flags & BRIDGE_VLAN_INFO_MASTER)) {
 				err = nbp_vlan_add(&p->br->vlan_info,
-						   vinfo->vid);
+						   vinfo->vid, vinfo->flags);
 			}
 			break;
 
 		case RTM_DELLINK:
-			nbp_vlan_delete(v, vinfo->vid);
+			nbp_vlan_delete(v, vinfo->vid, vinfo->flags);
 			if (p && (vinfo->flags & BRIDGE_VLAN_INFO_MASTER))
-				nbp_vlan_delete(&p->br->vlan_info, vinfo->vid);
+				nbp_vlan_delete(&p->br->vlan_info, vinfo->vid,
+						vinfo->flags);
 
 			break;
 		}
net/bridge/br_private.h +3 -2
index 4c507a4..d39701a 100644
@@ -89,6 +89,7 @@ struct net_port_vlan {
 struct net_port_vlans {
 	u16				port_idx;
 	struct list_head		vlan_list;
+	struct net_bridge_vlan __rcu	*pvlan;
 };
 
 struct net_bridge_fdb_entry
@@ -472,8 +473,8 @@ extern int br_min_mtu(const struct net_bridge *br);
 extern netdev_features_t br_features_recompute(struct net_bridge *br,
 	netdev_features_t features);
 extern struct net_bridge_vlan *br_vlan_find(struct net_bridge *br, u16 vid);
-extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid);
-extern int nbp_vlan_delete(struct net_port_vlans *v, u16 vid);
+extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags);
+extern int nbp_vlan_delete(struct net_port_vlans *v, u16 vid, u16 flags);
 extern struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v,
 					   u16 vid);
 
Signature · 1 line
1.7.7.6
#27 lore raw

Re: [PATCH 10/14] bridge: Add the ability to pvid

Quoted 5 lines · Vlad Yasevich

A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind.

Sorry.. this one is a left-over that snuck in.... Disregard this patch. The proper one is in the series already.

-vlad

Quoted 201 lines
---
  include/uapi/linux/if_bridge.h |    1 +
  net/bridge/br_if.c             |   77 +++++++++++++++++++++++++++++++++++++--
  net/bridge/br_netlink.c        |    9 +++--
  net/bridge/br_private.h        |    5 ++-
  4 files changed, 82 insertions(+), 10 deletions(-)
include/uapi/linux/if_bridge.h +1 -0
index 1bc9216..e5ea4cb 100644
@@ -120,6 +120,7 @@ enum {
  #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
 
  #define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
+#define BRIDGE_VLAN_INFO_PVID	(1<<1)	/* VLAN is PVID, ingress untagged */
 
  struct bridge_vlan_info {
  	u16 flags;
net/bridge/br_if.c +73 -4
index 7377113..0698581 100644
@@ -182,6 +182,56 @@ static void br_vlan_flush(struct net_bridge *br)
  	}
  }
 
+static int nbp_vlan_add_pvid(struct net_port_vlans *v,
+			     struct net_bridge_vlan *vlan)
+{
+	struct net_bridge_vlan *pvlan = rtnl_dereference(v->pvlan);
+
+	if (pvlan == vlan)
+		return 0;
+	else if (pvlan) {
+		/* PVID is already set.  Drop the ref
+		 * to the old one since we'll be replace it.
+		 */
+		br_vlan_put(pvlan);
+	} else if (v->port_idx) {
+		struct net_device *dev = vlans_to_port(v)->dev;
+
+		/* Add vid 0 to filter if filter is available. */
+		if (!vlan_hw_buggy(dev)) {
+			int err = vlan_vid_add_hw(dev, 0);
+			if (err)
+				return err;
+		}
+	}
+
+	br_vlan_hold(vlan);
+	rcu_assign_pointer(v->pvlan, vlan);
+	return 0;
+}
+
+static void nbp_vlan_delete_pvid(struct net_port_vlans *v,
+				 struct net_bridge_vlan *vlan)
+{
+	struct net_bridge_vlan *pvlan = rtnl_dereference(v->pvlan);
+
+	if (pvlan != vlan)
+		return;
+
+	if (v->port_idx &&
+	    vlan_vid_del_hw(vlans_to_port(v)->dev, 0)) {
+		pr_warn("failed to kill vid 0 for device %s\n",
+			vlans_to_port(v)->dev->name);
+	}
+
+	/* If this VLAN is currently functioning as pvlan, clear it.
+	 * It's safe to drop the refcount, since the vlan is still held
+	 * by the pve->vlan pointer.
+	 */
+	br_vlan_put(vlan);
+	rcu_assign_pointer(v->pvlan, NULL);
+}
+
  struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v, u16 vid)
  {
  	struct net_port_vlan *pve;
@@ -198,9 +248,9 @@ struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v, u16 vid)
  }
 
  /* Must be protected by RTNL */
-int nbp_vlan_add(struct net_port_vlans *v, u16 vid)
+int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags)
  {
-	struct net_port_vlan *pve;
+	struct net_port_vlan *pve = NULL;
  	struct net_bridge_vlan *vlan;
  	struct net_bridge *br = vlans_to_bridge(v);
  	struct net_bridge_port *p = vlans_to_port(v);
@@ -247,26 +297,45 @@ int nbp_vlan_add(struct net_port_vlans *v, u16 vid)
  	set_bit(v->port_idx, vlan->port_bitmap);
 
  	list_add_tail_rcu(&pve->list, &v->vlan_list);
+
+	if (flags & BRIDGE_VLAN_INFO_PVID) {
+		err = nbp_vlan_add_pvid(v, vlan);
+		if (err)
+			goto del_vlan;
+	}
+
  	return 0;
 
  clean_up:
  	kfree(pve);
  	br_vlan_del(vlan);
  	return err;
+del_vlan:
+	nbp_vlan_delete(v, vid, flags);
+	return err;
  }
 
  /* Must be protected by RTNL */
-int nbp_vlan_delete(struct net_port_vlans *v, u16 vid)
+int nbp_vlan_delete(struct net_port_vlans *v, u16 vid, u16 flags)
  {
  	struct net_port_vlan *pve;
  	struct net_bridge_vlan *vlan;
+	struct net_bridge *br;
 
  	ASSERT_RTNL();
 
+	if (v->port_idx)
+		br = vlans_to_port(v)->br;
+	else
+		br = vlans_to_bridge(v);
+
  	pve = nbp_vlan_find(v, vid);
  	if (!pve)
  		return -ENOENT;
 
+	if (flags & BRIDGE_VLAN_INFO_PVID)
+		nbp_vlan_delete_pvid(v, pve->vlan);
+
  	if (v->port_idx) {
  		/* A valid port index means this is a port.
  		 * Remove VLAN from the port device filter if it is supported.
@@ -301,7 +370,7 @@ static void nbp_vlan_flush(struct net_port_vlans *vlans)
  	ASSERT_RTNL();
 
  	list_for_each_entry_safe(pve, tmp, &vlans->vlan_list, list)
-		nbp_vlan_delete(vlans, pve->vid);
+		nbp_vlan_delete(vlans, pve->vid, BRIDGE_VLAN_INFO_PVID);
  }
 
  static void release_nbp(struct kobject *kobj)
net/bridge/br_netlink.c +5 -4
index f365ac4..08692d1 100644
@@ -200,19 +200,20 @@ static int br_afspec(struct net_bridge *br,
 
  		switch (cmd) {
  		case RTM_SETLINK:
-			err = nbp_vlan_add(v, vinfo->vid);
+			err = nbp_vlan_add(v, vinfo->vid, vinfo->flags);
  			if (err)
  				break;
  			if (p && (vinfo->flags & BRIDGE_VLAN_INFO_MASTER)) {
  				err = nbp_vlan_add(&p->br->vlan_info,
-						   vinfo->vid);
+						   vinfo->vid, vinfo->flags);
  			}
  			break;
 
  		case RTM_DELLINK:
-			nbp_vlan_delete(v, vinfo->vid);
+			nbp_vlan_delete(v, vinfo->vid, vinfo->flags);
  			if (p && (vinfo->flags & BRIDGE_VLAN_INFO_MASTER))
-				nbp_vlan_delete(&p->br->vlan_info, vinfo->vid);
+				nbp_vlan_delete(&p->br->vlan_info, vinfo->vid,
+						vinfo->flags);
 
  			break;
  		}
net/bridge/br_private.h +3 -2
index 4c507a4..d39701a 100644
@@ -89,6 +89,7 @@ struct net_port_vlan {
  struct net_port_vlans {
  	u16				port_idx;
  	struct list_head		vlan_list;
+	struct net_bridge_vlan __rcu	*pvlan;
  };
 
  struct net_bridge_fdb_entry
@@ -472,8 +473,8 @@ extern int br_min_mtu(const struct net_bridge *br);
  extern netdev_features_t br_features_recompute(struct net_bridge *br,
  	netdev_features_t features);
  extern struct net_bridge_vlan *br_vlan_find(struct net_bridge *br, u16 vid);
-extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid);
-extern int nbp_vlan_delete(struct net_port_vlans *v, u16 vid);
+extern int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags);
+extern int nbp_vlan_delete(struct net_port_vlans *v, u16 vid, u16 flags);
  extern struct net_port_vlan *nbp_vlan_find(const struct net_port_vlans *v,
  					   u16 vid);
 
#28 lore raw

PATCH v5 11/14 bridge: API to configure egress policy

In reply to Vlad Yasevich

Add an ability to configure "untagged" egress policy to the VLAN information of the bridge. The policy is by a flag and is represented as a port bitmap per vlan. Frames that leave a ports in "untagged" policy bitmap would egress the port without VLAN header.

---
 include/uapi/linux/if_bridge.h |    1 +
 net/bridge/br_if.c             |   49 +++++++++++++++++++++++++++++++--------
 net/bridge/br_private.h        |    1 +
 3 files changed, 41 insertions(+), 10 deletions(-)
include/uapi/linux/if_bridge.h +1 -0
index 875c9e2..8e1fc51 100644
@@ -121,6 +121,7 @@ enum {
 
 #define BRIDGE_VLAN_INFO_MASTER	(1<<0)	/* Operate on Bridge device as well */
 #define BRIDGE_VLAN_INFO_PVID	(1<<1)	/* VLAN is PVID, ingress untagged */
+#define BRIDGE_VLAN_INFO_UNTAGGED	(1<<2)	/* VLAN egresses untagged */
 
 struct bridge_vlan_info {
 	u16 flags;
net/bridge/br_if.c +39 -10

80 lines not on this page · raw message

net/bridge/br_private.h +1 -0
index bf00a5e..2e3317a 100644
@@ -77,6 +77,7 @@ struct net_bridge_vlan {
 	struct rcu_head			rcu;
 	u16				vid;
 	unsigned long			port_bitmap[PORT_BITMAP_LEN];
+	unsigned long			untagged_bitmap[PORT_BITMAP_LEN];
 };
 
 struct net_port_vlan {
Signature · 1 line
1.7.7.6
#29 lore raw

PATCH v5 12/14 bridge: Implement vlan ingress/egress policy

In reply to Vlad Yasevich

This patch implements the ingress/egress policy. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. The vlan is cached in the skb.

At egress, if we haven't cached the vlan (traffic arrived on vlan unaware interface), we try to find the vlan for egress port and cache it. If the egress port is vlan unaware, packet is forwared as is.

When we do have the vlan cached, we check to see the "untagged" bitmap to see if the traffic is supposed to leave untagged. Otherwise the traffic will leave with the vlan tag set.

---
 net/bridge/br_device.c    |    1 +
 net/bridge/br_forward.c   |  107 +++++++++++++++++++++++++++++++++++++++++++--
 net/bridge/br_input.c     |   33 ++++++++++++--
 net/bridge/br_multicast.c |   37 +++++++++------
 net/bridge/br_private.h   |   19 +++++---
 5 files changed, 167 insertions(+), 30 deletions(-)
net/bridge/br_device.c +1 -0
index e0814ce..fc73538 100644
@@ -46,6 +46,7 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
 	brstats->tx_bytes += skb->len;
 	u64_stats_update_end(&brstats->syncp);
 
+	memset(BR_INPUT_SKB_CB(skb), 0, sizeof(struct br_input_skb_cb));
 	if (!br_allowed_ingress(&br->vlan_info, skb, &vid))
 		goto out;
 
net/bridge/br_forward.c +103 -4

138 lines not on this page · raw message

net/bridge/br_input.c +29 -4
index 62173a5..3ebaf5d 100644
@@ -45,6 +45,10 @@ static int br_pass_frame_up(struct sk_buff *skb)
 		return NET_RX_DROP;
 	}
 
+	skb = br_handle_vlan(&br->vlan_info, skb);
+	if (!skb)
+		return NET_RX_DROP;
+
 	indev = skb->dev;
 	skb->dev = brdev;
 
@@ -56,15 +60,33 @@ bool br_allowed_ingress(struct net_port_vlans *v, struct sk_buff *skb, u16 *vid)
 {
 	struct net_port_vlan *pve;
 
-	BR_INPUT_SKB_CB(skb)->vlan = NULL;
-
 	/* If there are no vlan in the permitted list, all packets are
 	 * permitted.
 	 */
 	if (list_empty(&v->vlan_list))
 		return true;
 
-	*vid = br_get_vlan(skb);
+	if (br_get_vlan(skb, vid)) {
+		struct net_bridge_vlan *pvlan = rcu_dereference(v->pvlan);
+		u16 pvid;
+
+		/* Frame did not have a tag.  See if pvid is set
+		 * on this port.  That tells us which vlan untagged
+		 * traffic belongs to.
+		 */
+		if (!pvlan || (pvid = pvlan->vid) == BR_INVALID_VID)
+			return false;
+
+		/* PVID is set on this port.  Any untagged ingress
+		 * frame is considered to belong to this vlan.
+		 */
+		__vlan_hwaccel_put_tag(skb, pvid);
+		BR_INPUT_SKB_CB(skb)->vlan = pvlan;
+		BR_INPUT_SKB_CB(skb)->untagged = 1;
+		return true;
+	}
+
+	/* Frame had a valid vlan tag.  Find the VLAN it belongs to */
 	pve = nbp_vlan_find(v, *vid);
 	if (pve) {
 		BR_INPUT_SKB_CB(skb)->vlan = rcu_dereference(pve->vlan);
@@ -88,6 +110,7 @@ int br_handle_frame_finish(struct sk_buff *skb)
 	if (!p || p->state == BR_STATE_DISABLED)
 		goto drop;
 
+	memset(BR_INPUT_SKB_CB(skb), 0, sizeof(struct br_input_skb_cb));
 	if (!br_allowed_ingress(&p->vlan_info, skb, &vid))
 		goto drop;
 
@@ -157,8 +180,10 @@ drop:
 static int br_handle_local_finish(struct sk_buff *skb)
 {
 	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
+	u16 vid = 0;
 
-	br_fdb_update(p->br, p, eth_hdr(skb)->h_source, br_get_vlan(skb));
+	br_get_vlan(skb, &vid);
+	br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid);
 	return 0;	 /* process further */
 }
 
net/bridge/br_multicast.c +22 -15
index 9c0ac97..c2259b2 100644
@@ -907,6 +907,7 @@ static int br_ip4_multicast_igmp3_report(struct net_bridge *br,
 	int type;
 	int err = 0;
 	__be32 group;
+	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*ih)))
 		return -EINVAL;
@@ -942,8 +943,8 @@ static int br_ip4_multicast_igmp3_report(struct net_bridge *br,
 			continue;
 		}
 
-		err = br_ip4_multicast_add_group(br, port, group,
-						 br_get_vlan(skb));
+		br_get_vlan(skb, &vid);
+		err = br_ip4_multicast_add_group(br, port, group, vid);
 		if (err)
 			break;
 	}
@@ -962,6 +963,7 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br,
 	int len;
 	int num;
 	int err = 0;
+	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*icmp6h)))
 		return -EINVAL;
@@ -1003,8 +1005,9 @@ static int br_ip6_multicast_mld2_report(struct net_bridge *br,
 			continue;
 		}
 
+		br_get_vlan(skb, &vid);
 		err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
-						 br_get_vlan(skb));
+						 vid);
 		if (!err)
 			break;
 	}
@@ -1088,6 +1091,7 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	unsigned long now = jiffies;
 	__be32 group;
 	int err = 0;
+	u16 vid = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -1122,8 +1126,8 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group,
-			    br_get_vlan(skb));
+	br_get_vlan(skb, &vid);
+	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group, vid);
 	if (!mp)
 		goto out;
 
@@ -1164,6 +1168,7 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	unsigned long now = jiffies;
 	const struct in6_addr *group = NULL;
 	int err = 0;
+	u16 vid = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -1195,8 +1200,8 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group,
-			    br_get_vlan(skb));
+	br_get_vlan(skb, &vid);
+	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group, vid);
 	if (!mp)
 		goto out;
 
@@ -1346,6 +1351,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 	unsigned int len;
 	unsigned int offset;
 	int err;
+	u16 vid = 0;
 
 	/* We treat OOM as packet loss for now. */
 	if (!pskb_may_pull(skb, sizeof(*iph)))
@@ -1413,8 +1419,8 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 	case IGMP_HOST_MEMBERSHIP_REPORT:
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-		err = br_ip4_multicast_add_group(br, port, ih->group,
-						 br_get_vlan(skb2));
+		vid = br_get_vlan(skb2, &vid);
+		err = br_ip4_multicast_add_group(br, port, ih->group, vid);
 		break;
 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		err = br_ip4_multicast_igmp3_report(br, port, skb2);
@@ -1423,8 +1429,8 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 		err = br_ip4_multicast_query(br, port, skb2);
 		break;
 	case IGMP_HOST_LEAVE_MESSAGE:
-		br_ip4_multicast_leave_group(br, port, ih->group,
-					     br_get_vlan(skb2));
+		vid = br_get_vlan(skb2, &vid);
+		br_ip4_multicast_leave_group(br, port, ih->group, vid);
 		break;
 	}
 
@@ -1449,6 +1455,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 	unsigned int len;
 	int offset;
 	int err;
+	u16 vid = 0;
 
 	if (!pskb_may_pull(skb, sizeof(*ip6h)))
 		return -EINVAL;
@@ -1544,8 +1551,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 		}
 		mld = (struct mld_msg *)skb_transport_header(skb2);
 		BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca,
-						 br_get_vlan(skb2));
+		br_get_vlan(skb2, &vid);
+		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid);
 		break;
 	    }
 	case ICMPV6_MLD2_REPORT:
@@ -1562,8 +1569,8 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 			goto out;
 		}
 		mld = (struct mld_msg *)skb_transport_header(skb2);
-		br_ip6_multicast_leave_group(br, port, &mld->mld_mca,
-					     br_get_vlan(skb2));
+		br_get_vlan(skb2, &vid);
+		br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid);
 	    }
 	}
 
net/bridge/br_private.h +12 -7
index 2e3317a..bc5a321 100644
@@ -216,18 +216,20 @@ static inline struct net_bridge_port *vlans_to_port(struct net_port_vlans *vlans
 	return p;
 }
 
-static inline u16 br_get_vlan(const struct sk_buff *skb)
+static inline int br_get_vlan(const struct sk_buff *skb, u16 *tag)
 {
-	u16 tag;
+	int rc = 0;
 
-	if (vlan_tx_tag_present(skb))
-		return vlan_tx_tag_get(skb) & VLAN_VID_MASK;
+	if (vlan_tx_tag_present(skb)) {
+		*tag = vlan_tx_tag_get(skb) & VLAN_VID_MASK;
+		return rc;
+	}
 
 	/* Untagged and VLAN 0 traffic is handled the same way */
-	if (vlan_get_tag(skb, &tag))
-		return 0;
+	rc = vlan_get_tag(skb, tag);
+	*tag = *tag & VLAN_VID_MASK;
 
-	return tag & VLAN_VID_MASK;
+	return rc;
 }
 
 struct br_cpu_netstats {
@@ -335,6 +337,7 @@ static inline struct net_bridge *vlans_to_bridge(struct net_port_vlans *vlans)
 struct br_input_skb_cb {
 	struct net_device *brdev;
 	struct net_bridge_vlan *vlan;
+	int untagged;
 #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
 	int igmp;
 	int mrouters_only;
@@ -463,6 +466,8 @@ extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
 			     struct sk_buff *skb2);
 extern bool br_allowed_egress(const struct net_port_vlans *v,
 			      const struct sk_buff *skb);
+extern struct sk_buff *br_handle_vlan(const struct net_port_vlans *v,
+				      struct sk_buff *skb);
 
 /* br_if.c */
 extern void br_port_carrier_check(struct net_bridge_port *p);
Signature · 1 line
1.7.7.6
#30 lore raw

PATCH v5 13/14 bridge: Dump vlan information from a bridge port

In reply to Vlad Yasevich

Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped.

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    3 +-
 include/linux/netdevice.h                     |    3 +-
 include/uapi/linux/rtnetlink.h                |    1 +
 net/bridge/br_if.c                            |    2 +
 net/bridge/br_netlink.c                       |  108 ++++++++++++++++++++++---
 net/bridge/br_private.h                       |    3 +-
 net/core/rtnetlink.c                          |   16 +++-
 7 files changed, 118 insertions(+), 18 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +2 -1
index ec97efe..2f2a8e0 100644
@@ -7062,7 +7062,8 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev,
 }
 
 static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
-				    struct net_device *dev)
+				    struct net_device *dev,
+				    u32 filter_mask)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	u16 mode;
include/linux/netdevice.h +2 -1
index eb7a45f..178d297 100644
@@ -1017,7 +1017,8 @@ struct net_device_ops {
 						      struct nlmsghdr *nlh);
 	int			(*ndo_bridge_getlink)(struct sk_buff *skb,
 						      u32 pid, u32 seq,
-						      struct net_device *dev);
+						      struct net_device *dev,
+						      u32 filter_mask);
 	int			(*ndo_bridge_dellink)(struct net_device *dev,
 						      struct nlmsghdr *nlh);
 	int			(*ndo_change_carrier)(struct net_device *dev,
include/uapi/linux/rtnetlink.h +1 -0
index 7a5eb19..7a2144e 100644
@@ -630,6 +630,7 @@ struct tcamsg {
 
 /* New extended info filters for IFLA_EXT_MASK */
 #define RTEXT_FILTER_VF		(1 << 0)
+#define RTEXT_FILTER_BRVLAN	(1 << 1)
 
 /* End of information exported to user level */
 
net/bridge/br_if.c +2 -0
index 3e4c841..e846f2f 100644
@@ -327,6 +327,7 @@ int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags)
 	set_bit(v->port_idx, vlan->port_bitmap);
 
 	list_add_tail_rcu(&pve->list, &v->vlan_list);
+	v->num_vlans++;
 
 	err = nbp_vlan_do_flags(v, vlan, flags);
 	if (err)
@@ -383,6 +384,7 @@ int nbp_vlan_delete(struct net_port_vlans *v, u16 vid)
 	br_vlan_put(vlan);
 
 	list_del_rcu(&pve->list);
+	v->num_vlans--;
 	kfree_rcu(pve, rcu);
 
 	br_vlan_del(vlan);
net/bridge/br_netlink.c +97 -11

164 lines not on this page · raw message

net/bridge/br_private.h +2 -1
index bc5a321..92b695e 100644
@@ -89,6 +89,7 @@ struct net_port_vlan {
 
 struct net_port_vlans {
 	u16				port_idx;
+	u16				num_vlans;
 	struct list_head		vlan_list;
 	struct net_bridge_vlan __rcu	*pvlan;
 };
@@ -677,7 +678,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
 extern int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg);
 extern int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg);
 extern int br_getlink(struct sk_buff *skb, u32 pid, u32 seq,
-		      struct net_device *dev);
+		      struct net_device *dev, u32 filter_mask);
 
 #ifdef CONFIG_SYSFS
 /* br_sysfs_if.c */
net/core/rtnetlink.c +12 -4
index 87b07d8..257b73e 100644
@@ -2326,6 +2326,13 @@ static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb)
 	int idx = 0;
 	u32 portid = NETLINK_CB(cb->skb).portid;
 	u32 seq = cb->nlh->nlmsg_seq;
+	struct nlattr *extfilt;
+	u32 filter_mask = 0;
+
+	extfilt = nlmsg_find_attr(cb->nlh, sizeof(struct rtgenmsg),
+				  IFLA_EXT_MASK);
+	if (extfilt)
+		filter_mask = nla_get_u32(extfilt);
 
 	rcu_read_lock();
 	for_each_netdev_rcu(net, dev) {
@@ -2335,14 +2342,15 @@ static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb)
 		if (br_dev && br_dev->netdev_ops->ndo_bridge_getlink) {
 			if (idx >= cb->args[0] &&
 			    br_dev->netdev_ops->ndo_bridge_getlink(
-				    skb, portid, seq, dev) < 0)
+				    skb, portid, seq, dev, filter_mask) < 0)
 				break;
 			idx++;
 		}
 
 		if (ops->ndo_bridge_getlink) {
 			if (idx >= cb->args[0] &&
-			    ops->ndo_bridge_getlink(skb, portid, seq, dev) < 0)
+			    ops->ndo_bridge_getlink(skb, portid, seq, dev,
+						    filter_mask) < 0)
 				break;
 			idx++;
 		}
@@ -2383,14 +2391,14 @@ static int rtnl_bridge_notify(struct net_device *dev, u16 flags)
 
 	if ((!flags || (flags & BRIDGE_FLAGS_MASTER)) &&
 	    br_dev && br_dev->netdev_ops->ndo_bridge_getlink) {
-		err = br_dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev);
+		err = br_dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0);
 		if (err < 0)
 			goto errout;
 	}
 
 	if ((flags & BRIDGE_FLAGS_SELF) &&
 	    dev->netdev_ops->ndo_bridge_getlink) {
-		err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev);
+		err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0);
 		if (err < 0)
 			goto errout;
 	}
Signature · 1 line
1.7.7.6
#31 lore raw

PATCH v5 14/14 bridge: Add vlan support for local fdb entries

In reply to Vlad Yasevich

When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port.

---
 net/bridge/br_fdb.c     |   62 +++++++++++++++++++++++++++++++++++-----------
 net/bridge/br_if.c      |   27 ++++++++++++++++++--
 net/bridge/br_private.h |    4 ++-
 3 files changed, 74 insertions(+), 19 deletions(-)
net/bridge/br_fdb.c +47 -15
index 90d0bc9..942fe49 100644
@@ -28,7 +28,7 @@
 
 static struct kmem_cache *br_fdb_cache __read_mostly;
 static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
-		      const unsigned char *addr);
+		      const unsigned char *addr, u16 vid);
 static void fdb_notify(struct net_bridge *br,
 		       const struct net_bridge_fdb_entry *, int);
 
@@ -92,6 +92,7 @@ static void fdb_delete(struct net_bridge *br, struct net_bridge_fdb_entry *f)
 void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
 {
 	struct net_bridge *br = p->br;
+	int no_vlan = list_empty(&p->vlan_info.vlan_list);
 	int i;
 
 	spin_lock_bh(&br->hash_lock);
@@ -106,10 +107,13 @@ void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
 			if (f->dst == p && f->is_local) {
 				/* maybe another port has same hw addr? */
 				struct net_bridge_port *op;
+				u16 vid = f->vlan_id;
 				list_for_each_entry(op, &br->port_list, list) {
 					if (op != p &&
 					    ether_addr_equal(op->dev->dev_addr,
-							     f->addr.addr)) {
+							     f->addr.addr) &&
+					    nbp_vlan_find(&op->vlan_info,
+							  vid)) {
 						f->dst = op;
 						goto insert;
 					}
@@ -117,27 +121,55 @@ void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
 
 				/* delete old one */
 				fdb_delete(br, f);
-				goto insert;
+insert:
+				/* insert new address,  may fail if invalid
+				 * address or dup.
+				 */
+				fdb_insert(br, p, newaddr, vid);
+
+				/* if this port has no vlan information
+				 * configured, we can safely be done at
+				 * this point.
+				 */
+				if (no_vlan)
+					goto done;
 			}
 		}
 	}
- insert:
-	/* insert new address,  may fail if invalid address or dup. */
-	fdb_insert(br, p, newaddr);
 
+done:
 	spin_unlock_bh(&br->hash_lock);
 }
 
 void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr)
 {
 	struct net_bridge_fdb_entry *f;
+	struct net_bridge_vlan *vlan;
+	struct hlist_node *node;
+	int i;
 
 	/* If old entry was unassociated with any port, then delete it. */
 	f = __br_fdb_get(br, br->dev->dev_addr, 0);
 	if (f && f->is_local && !f->dst)
 		fdb_delete(br, f);
 
-	fdb_insert(br, NULL, newaddr);
+	fdb_insert(br, NULL, newaddr, 0);
+
+	/* Now remove and add entries for every VLAN configured on the
+	 * bridge.
+	 */
+	for (i = 0; i < BR_VID_HASH_SIZE; i++) {
+		hlist_for_each_entry_rcu(vlan, node,
+					 &br->vlan_hlist[i], hlist) {
+			if (vlan->vid == BR_INVALID_VID || vlan->vid == 0)
+				continue;
+
+			f = __br_fdb_get(br, br->dev->dev_addr, vlan->vid);
+			if (f && f->is_local && !f->dst)
+				fdb_delete(br, f);
+			fdb_insert(br, NULL, newaddr, vlan->vid);
+		}
+	}
 }
 
 void br_fdb_cleanup(unsigned long _data)
@@ -380,15 +412,15 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
 }
 
 static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
-		  const unsigned char *addr)
+		  const unsigned char *addr, u16 vid)
 {
-	struct hlist_head *head = &br->hash[br_mac_hash(addr, 0)];
+	struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)];
 	struct net_bridge_fdb_entry *fdb;
 
 	if (!is_valid_ether_addr(addr))
 		return -EINVAL;
 
-	fdb = fdb_find(head, addr, 0);
+	fdb = fdb_find(head, addr, vid);
 	if (fdb) {
 		/* it is okay to have multiple ports with same
 		 * address, just use the first one.
@@ -401,7 +433,7 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
 		fdb_delete(br, fdb);
 	}
 
-	fdb = fdb_create(head, source, addr, 0);
+	fdb = fdb_create(head, source, addr, vid);
 	if (!fdb)
 		return -ENOMEM;
 
@@ -412,12 +444,12 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
 
 /* Add entry for local address of interface */
 int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
-		  const unsigned char *addr)
+		  const unsigned char *addr, u16 vid)
 {
 	int ret;
 
 	spin_lock_bh(&br->hash_lock);
-	ret = fdb_insert(br, source, addr);
+	ret = fdb_insert(br, source, addr, vid);
 	spin_unlock_bh(&br->hash_lock);
 	return ret;
 }
@@ -710,8 +742,8 @@ out:
 	return err;
 }
 
-static int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr,
-			      u16 vlan)
+int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr,
+		       u16 vlan)
 {
 	struct hlist_head *head = &br->hash[br_mac_hash(addr, vlan)];
 	struct net_bridge_fdb_entry *fdb;
net/bridge/br_if.c +24 -3
index e846f2f..159b8bf 100644
@@ -333,6 +333,14 @@ int nbp_vlan_add(struct net_port_vlans *v, u16 vid, u16 flags)
 	if (err)
 		goto del_vlan;
 
+	err = br_fdb_insert(br, p,
+			   (p ? p->dev->dev_addr : br->dev->dev_addr), vid);
+	if (err) {
+		br_err(br,
+		       "failed insert local address bridge forwarding table\n");
+		goto del_vlan;
+	}
+
 	return 0;
 
 clean_up:
@@ -350,13 +358,17 @@ int nbp_vlan_delete(struct net_port_vlans *v, u16 vid)
 	struct net_port_vlan *pve;
 	struct net_bridge_vlan *vlan;
 	struct net_bridge *br;
+	unsigned char *addr;
 
 	ASSERT_RTNL();
 
-	if (v->port_idx)
+	if (v->port_idx) {
 		br = vlans_to_port(v)->br;
-	else
+		addr = vlans_to_port(v)->dev->dev_addr;
+	} else {
 		br = vlans_to_bridge(v);
+		addr = br->dev->dev_addr;
+	}
 
 	pve = nbp_vlan_find(v, vid);
 	if (!pve)
@@ -377,6 +389,15 @@ int nbp_vlan_delete(struct net_port_vlans *v, u16 vid)
 				vid, dev->name);
 	}
 
+	if (vid) {
+		/* If the VID !=0 remove fdb for this vid. VID 0 is special
+		 * in that it's the default and is always there in the fdb.
+		 */
+		spin_lock_bh(&br->hash_lock);
+		fdb_delete_by_addr(br, addr, vid);
+		spin_unlock_bh(&br->hash_lock);
+	}
+
 	pve->vid = BR_INVALID_VID;
 
 	rcu_assign_pointer(pve->vlan, NULL);
@@ -719,7 +740,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 
 	dev_set_mtu(br->dev, br_min_mtu(br));
 
-	if (br_fdb_insert(br, p, dev->dev_addr))
+	if (br_fdb_insert(br, p, dev->dev_addr, 0))
 		netdev_err(dev, "failed insert local address bridge forwarding table\n");
 
 	kobject_uevent(&p->kobj, KOBJ_ADD);
net/bridge/br_private.h +3 -1
index 92b695e..9b74883 100644
@@ -437,11 +437,13 @@ extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 			  unsigned long count, unsigned long off);
 extern int br_fdb_insert(struct net_bridge *br,
 			 struct net_bridge_port *source,
-			 const unsigned char *addr);
+			 const unsigned char *addr,
+			 u16 vid);
 extern void br_fdb_update(struct net_bridge *br,
 			  struct net_bridge_port *source,
 			  const unsigned char *addr,
 			  u16 vid);
+extern int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vid);
 
 extern int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
 			 struct net_device *dev,
Signature · 1 line
1.7.7.6