drm/i915: Fix RGB color range property for PCH platforms
Subsystems (2)
PATCH 1/1 drm/i915: Fix RGB color range property for PCH platforms
From: Ville Syrjälä <[email protected]>
The RGB color range select bit on the DP/SDVO/HDMI registers disappeared when PCH was introduced, and instead a new PIPECONF bit was added that performs the same function.
Add a new intel_encoder function pointer to query the encoder whether limited or full range should be selected, and set the PIPECONF bit 13 accordingly.
Experimentation showed that simply toggling the bit while the pipe is active doesn't work. We need to restart the pipe, which luckily already happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it, although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a volunteer to test if it's just a documentation issue or if it's really gone. If the bit is gone and no easy replacement is found, then I suppose we may need to use the pipe CSC unit to perform the range compression.
- move color_range to intel_encoder to avoid the silly func pointer?
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 19 +++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- drivers/gpu/drm/i915/intel_drv.h | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 8 ++++++++ drivers/gpu/drm/i915/intel_sdvo.c | 10 +++++++++- 6 files changed, 48 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -2650,6 +2650,7 @@#define PIPECONF_INTERLACED_DBL_ILK (4 << 21)/* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21)/* ilk/snb only */ #define PIPECONF_CXSR_DOWNCLOCK (1<<16) +#define PIPECONF_COLOR_RANGE_SELECT (1 << 13)#define PIPECONF_BPC_MASK (0x7 << 5)#define PIPECONF_8BPC (0<<5)#define PIPECONF_10BPC (1<<5)
drivers/gpu/drm/i915/intel_display.c +19 -0
@@ -5053,6 +5053,20 @@ static int ironlake_get_refclk(struct drm_crtc *crtc)return 120000 ; } +static bool intel_limited_color_range (struct drm_crtc *crtc) +{ +struct drm_device *dev = crtc->dev; +struct intel_encoder *intel_encoder; +bool limited_color_range = false; + +for_each_encoder_on_crtc (dev, crtc, intel_encoder) { +if (intel_encoder->limited_color_range) + limited_color_range |= intel_encoder->limited_color_range (intel_encoder); + } + +return limited_color_range; +} +static void ironlake_set_pipeconf (struct drm_crtc *crtc,struct drm_display_mode *adjusted_mode,bool dither)
@@ -5093,6 +5107,11 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,else val |=PIPECONF_PROGRESSIVE ; +if (intel_limited_color_range (crtc)) + val |=PIPECONF_COLOR_RANGE_SELECT ; +else + val &= ~PIPECONF_COLOR_RANGE_SELECT ; +I915_WRITE (PIPECONF (pipe), val);POSTING_READ (PIPECONF (pipe)); }
drivers/gpu/drm/i915/intel_dp.c +10 -1
@@ -967,7 +967,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,else intel_dp->DP |=DP_PLL_FREQ_270MHZ ; }else if (!HAS_PCH_CPT (dev) ||is_cpu_edp (intel_dp)) { - intel_dp->DP |= intel_dp->color_range; +if (!HAS_PCH_SPLIT (dev)) + intel_dp->DP |= intel_dp->color_range;if (adjusted_mode->flags &DRM_MODE_FLAG_PHSYNC ) intel_dp->DP |=DP_SYNC_HS_HIGH ;
@@ -1392,6 +1393,13 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_dp_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base); + +return intel_dp->color_range; +} +static void intel_disable_dp (struct intel_encoder *encoder) {struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base);
@@ -2913,6 +2921,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->disable = intel_disable_dp; intel_encoder->post_disable = intel_post_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_encoder->limited_color_range = intel_dp_limited_color_range; intel_dig_port->port = port; intel_dig_port->dp.output_reg = output_reg;
drivers/gpu/drm/i915/intel_drv.h +1 -0
@@ -162,6 +162,7 @@ struct intel_encoder {* the encoder is active. If the encoder is enabled it also set the pipe * it is connected to in the pipe parameter. */ bool (*get_hw_state)(struct intel_encoder *,enum pipe *pipe); +bool (*limited_color_range)(struct intel_encoder *);int crtc_mask; };
drivers/gpu/drm/i915/intel_hdmi.c +8 -0
@@ -646,6 +646,13 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_hdmi_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_hdmi *intel_hdmi =enc_to_intel_hdmi (&encoder->base); + +return intel_hdmi->color_range; +} +static void intel_enable_hdmi (struct intel_encoder *encoder) {struct drm_device *dev = encoder->base.dev;
@@ -1062,6 +1069,7 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port) intel_encoder->enable = intel_enable_hdmi; intel_encoder->disable = intel_disable_hdmi; intel_encoder->get_hw_state = intel_hdmi_get_hw_state; + intel_encoder->limited_color_range = intel_hdmi_limited_color_range; intel_encoder->type =INTEL_OUTPUT_HDMI ; intel_encoder->crtc_mask = (1 <<0 ) | (1 <<1 ) | (1 <<2 );
drivers/gpu/drm/i915/intel_sdvo.c +9 -1
@@ -1153,7 +1153,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,/* The real mode polarity is set by the SDVO commands, using * struct intel_sdvo_dtd. */ sdvox =SDVO_VSYNC_ACTIVE_HIGH |SDVO_HSYNC_ACTIVE_HIGH ; -if (intel_sdvo->is_hdmi) +if (!HAS_PCH_SPLIT (dev) && intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range;if (INTEL_INFO (dev)->gen <5 ) sdvox |=SDVO_BORDER_ENABLE ;
@@ -1228,6 +1228,13 @@ static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_sdvo_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_sdvo *intel_sdvo =to_intel_sdvo (&encoder->base); + +return intel_sdvo->color_range; +} +static void intel_disable_sdvo (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
@@ -2746,6 +2753,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_encoder->disable = intel_disable_sdvo; intel_encoder->enable = intel_enable_sdvo; intel_encoder->get_hw_state = intel_sdvo_get_hw_state; + intel_encoder->limited_color_range = intel_sdvo_limited_color_range;/* In default case sdvo lvds is false */ if (!intel_sdvo_get_capabilities (intel_sdvo, &intel_sdvo->caps))
Signature · 6 lines
1.7.8.6 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 24 lines · On Wed, Jan 9, 2013 at 7:36 PM, <[email protected]> wrote:
From: Ville Syrjälä <[email protected]>
The RGB color range select bit on the DP/SDVO/HDMI registers disappeared when PCH was introduced, and instead a new PIPECONF bit was added that performs the same function.
Add a new
intel_encoderfunction pointer to query the encoder whether limited or full range should be selected, and set the PIPECONF bit 13 accordingly.Experimentation showed that simply toggling the bit while the pipe is active doesn't work. We need to restart the pipe, which luckily already happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it, although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a volunteer to test if it's just a documentation issue or if it's really gone. If the bit is gone and no easy replacement is found, then I suppose we may need to use the pipe CSC unit to perform the range compression.
- movecolor_rangetointel_encoderto avoid the silly func pointer?
Quoted 2 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
Signed-off-by Ville Syrjälä <[email protected]>
Can't we just add another flag to mod->private_flags like we do for 6bpc dithering? I know that that's ugly, and we need to extend this into a more generic pipe configuration struct, but we have way to many bits&pieces where encoders want to control/influence pipe state like that, so adding new virtual functions like this wont scale. -Daniel
Quoted 174 lines
--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 19 +++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- drivers/gpu/drm/i915/intel_drv.h | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 8 ++++++++ drivers/gpu/drm/i915/intel_sdvo.c | 10 +++++++++- 6 files changed, 48 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -2650,6 +2650,7 @@#define PIPECONF_INTERLACED_DBL_ILK (4 << 21)/* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21)/* ilk/snb only */ #define PIPECONF_CXSR_DOWNCLOCK (1<<16) +#define PIPECONF_COLOR_RANGE_SELECT (1 << 13)#define PIPECONF_BPC_MASK (0x7 << 5)#define PIPECONF_8BPC (0<<5)#define PIPECONF_10BPC (1<<5)drivers/gpu/drm/i915/intel_display.c +19
-0@@ -5053,6 +5053,20 @@ static int ironlake_get_refclk(struct drm_crtc *crtc)return 120000 ; } +static bool intel_limited_color_range (struct drm_crtc *crtc) +{ +struct drm_device *dev = crtc->dev; +struct intel_encoder *intel_encoder; +bool limited_color_range = false; + +for_each_encoder_on_crtc (dev, crtc, intel_encoder) { +if (intel_encoder->limited_color_range) + limited_color_range |= intel_encoder->limited_color_range (intel_encoder); + } + +return limited_color_range; +} +static void ironlake_set_pipeconf (struct drm_crtc *crtc,struct drm_display_mode *adjusted_mode,bool dither)@@ -5093,6 +5107,11 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,else val |=PIPECONF_PROGRESSIVE ; +if (intel_limited_color_range (crtc)) + val |=PIPECONF_COLOR_RANGE_SELECT ; +else + val &= ~PIPECONF_COLOR_RANGE_SELECT ; +I915_WRITE (PIPECONF (pipe), val);POSTING_READ (PIPECONF (pipe)); }drivers/gpu/drm/i915/intel_dp.c +10
-1@@ -967,7 +967,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,else intel_dp->DP |=DP_PLL_FREQ_270MHZ ; }else if (!HAS_PCH_CPT (dev) ||is_cpu_edp (intel_dp)) { - intel_dp->DP |= intel_dp->color_range; +if (!HAS_PCH_SPLIT (dev)) + intel_dp->DP |= intel_dp->color_range;if (adjusted_mode->flags &DRM_MODE_FLAG_PHSYNC ) intel_dp->DP |=DP_SYNC_HS_HIGH ;@@ -1392,6 +1393,13 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_dp_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base); + +return intel_dp->color_range; +} +static void intel_disable_dp (struct intel_encoder *encoder) {struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base);@@ -2913,6 +2921,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->disable = intel_disable_dp; intel_encoder->post_disable = intel_post_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_encoder->limited_color_range = intel_dp_limited_color_range; intel_dig_port->port = port; intel_dig_port->dp.output_reg = output_reg;drivers/gpu/drm/i915/intel_drv.h +1
-0@@ -162,6 +162,7 @@ struct intel_encoder {* the encoder is active. If the encoder is enabled it also set the pipe * it is connected to in the pipe parameter. */ bool (*get_hw_state)(struct intel_encoder *,enum pipe *pipe); +bool (*limited_color_range)(struct intel_encoder *);int crtc_mask; };drivers/gpu/drm/i915/intel_hdmi.c +8
-0@@ -646,6 +646,13 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_hdmi_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_hdmi *intel_hdmi =enc_to_intel_hdmi (&encoder->base); + +return intel_hdmi->color_range; +} +static void intel_enable_hdmi (struct intel_encoder *encoder) {struct drm_device *dev = encoder->base.dev;@@ -1062,6 +1069,7 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port) intel_encoder->enable = intel_enable_hdmi; intel_encoder->disable = intel_disable_hdmi; intel_encoder->get_hw_state = intel_hdmi_get_hw_state; + intel_encoder->limited_color_range = intel_hdmi_limited_color_range; intel_encoder->type =INTEL_OUTPUT_HDMI ; intel_encoder->crtc_mask = (1 <<0 ) | (1 <<1 ) | (1 <<2 );drivers/gpu/drm/i915/intel_sdvo.c +9
-2@@ -1153,7 +1153,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,/* The real mode polarity is set by the SDVO commands, using * struct intel_sdvo_dtd. */ sdvox =SDVO_VSYNC_ACTIVE_HIGH |SDVO_HSYNC_ACTIVE_HIGH ; -if (intel_sdvo->is_hdmi) +if (!HAS_PCH_SPLIT (dev) && intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range;if (INTEL_INFO (dev)->gen <5 ) sdvox |=SDVO_BORDER_ENABLE ;@@ -1228,6 +1228,13 @@ static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder,return true; } +static bool intel_sdvo_limited_color_range (struct intel_encoder *encoder) +{ +struct intel_sdvo *intel_sdvo =to_intel_sdvo (&encoder->base); + +return intel_sdvo->color_range; +} +static void intel_disable_sdvo (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;@@ -2746,6 +2753,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_encoder->disable = intel_disable_sdvo; intel_encoder->enable = intel_enable_sdvo; intel_encoder->get_hw_state = intel_sdvo_get_hw_state; + intel_encoder->limited_color_range = intel_sdvo_limited_color_range;/* In default case sdvo lvds is false */ if (!intel_sdvo_get_capabilities (intel_sdvo, &intel_sdvo->caps)) --1.7.8.6
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 25 lines · Daniel Vetter
Quoted 24 lines · On Wed, Jan 9, 2013 at 7:36 PM, <[email protected]> wrote:
From: Ville Syrjälä <[email protected]>
The RGB color range select bit on the DP/SDVO/HDMI registers disappeared when PCH was introduced, and instead a new PIPECONF bit was added that performs the same function.
Add a new
intel_encoderfunction pointer to query the encoder whether limited or full range should be selected, and set the PIPECONF bit 13 accordingly.Experimentation showed that simply toggling the bit while the pipe is active doesn't work. We need to restart the pipe, which luckily already happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it, although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a volunteer to test if it's just a documentation issue or if it's really gone. If the bit is gone and no easy replacement is found, then I suppose we may need to use the pipe CSC unit to perform the range compression.
- movecolor_rangetointel_encoderto avoid the silly func pointer?
Quoted 8 lines
Quoted 2 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
Signed-off-by Ville Syrjälä <[email protected]>Can't we just add another flag to
mod->private_flagslike we do for 6bpc dithering? I know that that's ugly, and we need to extend this into a more generic pipe configuration struct, but we have way to many bits&pieces where encoders want to control/influence pipe state like that, so adding new virtual functions like this wont scale.
Right. private_flags seems like a decent way to handle this. v2 coming up soon.
Signature · 2 lines
Ville Syrjälä Intel OTC