ARM: remove redundant 'select GENERIC_GPIO'
Subsystems (4)
PATCH v2 1/1 ARM: remove redundant 'select GENERIC_GPIO'
In drivers/gpio/Kcong, ARCH_REQUIRE_GPIOLIB selects GPIOLIB which in turn selects GENERIC_GPIO. So GENERIC_GPIO will be selected automatically for those platforms that select ARCH_REQUIRE_GPIOLIB.
Remove the redundant 'select GENERIC_GPIO' for platforms that already select ARCH_REQUIRE_GPIOLIB at either mach or plat level.
---
Changes since v1:
- Update commit log to better explain why the select is unncessary
arch/arm/Kconfig | 9 --------- arch/arm/mach-bcm/Kconfig | 1 - arch/arm/mach-picoxcell/Kconfig | 1 - arch/arm/mach-vt8500/Kconfig | 1 - 4 files changed, 12 deletions(-)
arch/arm/Kconfig +0 -9
@@ -347,7 +347,6 @@ config ARCH_BCM2835 select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select MULTI_IRQ_HANDLER select PINCTRL select PINCTRL_BCM2835
@@ -644,7 +643,6 @@ config ARCH_TEGRA select CLKSRC_MMIO select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0
@@ -744,7 +742,6 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,7 +784,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -802,7 +798,6 @@ config ARCH_S5PC100 select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -820,7 +815,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -838,7 +832,6 @@ config ARCH_EXYNOS select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -873,7 +866,6 @@ config ARCH_U300 select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select SPARSE_IRQ help
@@ -957,7 +949,6 @@ config ARCH_VT8500_SINGLE select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select MULTI_IRQ_HANDLER select SPARSE_IRQ
arch/arm/mach-bcm/Kconfig +0 -1
@@ -7,7 +7,6 @@ config ARCH_BCM select ARM_GIC select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select GENERIC_TIME select GPIO_BCM select SPARSE_IRQ
arch/arm/mach-picoxcell/Kconfig +0 -1
@@ -7,7 +7,6 @@ config ARCH_PICOXCELL select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select NO_IOPORT select SPARSE_IRQ
arch/arm/mach-vt8500/Kconfig +0 -1
@@ -6,7 +6,6 @@ config ARCH_VT8500 select CLKDEV_LOOKUP select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
Signature · 1 line
1.7.9.5
Olof Johansson
AppliedPATCH v2 1/1 ARM: remove redundant 'select GENERIC_GPIO'
Quoted 4 lines · Shawn Guo
In
drivers/gpio/Kcong,ARCH_REQUIRE_GPIOLIBselects GPIOLIB which in turn selectsGENERIC_GPIO. SoGENERIC_GPIOwill be selected automatically for those platforms that selectARCH_REQUIRE_GPIOLIB.
Quoted 8 lines
Remove the redundant 'select
GENERIC_GPIO' for platforms that already selectARCH_REQUIRE_GPIOLIBat either mach or plat level.Signed-off-by Shawn Guo <[email protected]>Acked-by Linus Walleij <[email protected]>---
Changes since v1:
- Update commit log to better explain why the select is unncessary
Applied to next/cleanup. Thanks!
-Olof