arm: mvebu: add LEDs support to defconfig file
PATCH 1/1 arm: mvebu: add LEDs support to defconfig file
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to enable LED support in mvebu_defconfig. We anticipate that more platforms using Marvell EBU SoCs will have LEDs in the future.
---
This is 3.8-rc material.
--- arch/arm/configs/mvebu_defconfig | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/configs/mvebu_defconfig +5 -0
@@ -40,6 +40,11 @@ CONFIG_I2C_MV64XXX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y
Signature · 1 line
1.7.9.5
PATCH 1/1 arm: mvebu: add LEDs support to defconfig file
Quoted 7 lines · Thomas Petazzoni
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to enable LED support in
mvebu_defconfig. We anticipate that more platforms using Marvell EBU SoCs will have LEDs in the future.Signed-off-by Thomas Petazzoni <[email protected]>---
This is 3.8-rc material.
Is this patch fixing a problem? I'm inclined to queue this up for 3.9
thx,
Jason.
Quoted 28 lines
--- arch/arm/configs/mvebu_defconfig | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/configs/mvebu_defconfig +5
-0@@ -40,6 +40,11 @@ CONFIG_I2C_MV64XXX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=ySignature · 7 lines
1.7.9.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/1 arm: mvebu: add LEDs support to defconfig file
Dear Jason Cooper,
Quoted 10 lines · Jason Cooper
Quoted 7 lines · Thomas Petazzoni
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to enable LED support in
mvebu_defconfig. We anticipate that more platforms using Marvell EBU SoCs will have LEDs in the future.Signed-off-by Thomas Petazzoni <[email protected]>---
This is 3.8-rc material.Is this patch fixing a problem? I'm inclined to queue this up for 3.9
Well, it's just a defconfig update, and I think defconfig updates are generally accepted during the -rc cycle.
Otherwise, I'm fine if it waits until 3.9.
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
Jason Cooper
AppliedPATCH 1/1 arm: mvebu: add LEDs support to defconfig file
In reply to Thomas PetazzoniQuoted 10 lines · Thomas Petazzoni
The OpenBlocks AX3-4 platform has several LEDs, so it sounds wise to enable LED support in
mvebu_defconfig. We anticipate that more platforms using Marvell EBU SoCs will have LEDs in the future.Signed-off-by Thomas Petazzoni <[email protected]>---
This is 3.8-rc material.--- arch/arm/configs/mvebu_defconfig | 5 +++++ 1 file changed, 5 insertions(+)
Applied to mvebu/boards
thx,
Jason.