OMAP SHAM & AES Crypto Updates
Subsystems (7)
cover OMAP SHAM & AES Crypto Updates
From: "Mark A. Greer" <[email protected]>
[This series supersedes the hwmod related patches sent in the
"crypto: omap-sham updates" and "crypto: omap-aes updates" series a few weeks ago.]
This series adds hwmod support for the OMAP SHAM and AES modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also adds device tree info for those modules.
The patches are based on the latest k.o. kernel, plus:
- patches from the EDMA dmaengine series submitted by Matt Porter "[RFC PATCH v3 00/16] DMA Engine support for AM33XX"
(https://lkml.org/lkml/2012/10/18/256).
- some misc patches required by the EDMA patches
- a hack to fix the compilation error that it currently has
The driver changes that will take advantage of these changes will be submitted in a different series (and to a different mail list).
A working example is here:
git at github.com:mgreeraz/linux-mag.git submitted/crypto/hwmod
Mark A. Greer (15):
ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod
ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module
ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod
ARM: OMAP2+: Remove unnecessary message when no SHA IP is present
ARM: OMAP2+: Only manually add hwmod data when DT not used.
ARM: AM33XX: Add sha0 crypto clock data
ARM: AM33XX: hwmod: Update and uncomment SHA0 module data
ARM: dts: Add SHAM data and documentation for AM33XX
ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod
ARM: OMAP3xxx: hwmod: Convert AES crypto device data to hwmod
ARM: OMAP2+: Remove unnecessary message when no AES IP is present
ARM: OMAP2+: Only manually add hwmod data when DT not used.
ARM: AM33XX: Add aes0 crypto clock data
ARM: AM33XX: hwmod: Update and uncomment AES0 module data
ARM: dts: Add AES data and documentation for AM33XX
.../devicetree/bindings/crypto/omap-aes.txt | 37 +++++ .../devicetree/bindings/crypto/omap-sham.txt | 35 +++++ arch/arm/boot/dts/am335x-bone.dts | 8 ++ arch/arm/boot/dts/am335x-evm.dts | 8 ++ arch/arm/boot/dts/am335x-evmsk.dts | 8 ++ arch/arm/boot/dts/am33xx.dtsi | 25 ++++ arch/arm/mach-omap2/cclock2430_data.c | 4 +- arch/arm/mach-omap2/cclock33xx_data.c | 10 ++ arch/arm/mach-omap2/cclock3xxx_data.c | 4 +- arch/arm/mach-omap2/devices.c | 149 +++------------------ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 + arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 + .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 36 +++++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 81 +++++++++++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 92 +++++++++++-- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 128 ++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_common_data.h | 4 + 17 files changed, 488 insertions(+), 145 deletions(-) create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
Signature · 1 line
1.7.12
PATCH 1/15 ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod
From: "Mark A. Greer" <[email protected]>
Convert the device data for the OMAP2 SHAM crypto IP from explicit platform_data to hwmod.
--- arch/arm/mach-omap2/cclock2430_data.c | 1 + arch/arm/mach-omap2/devices.c | 32 +++++++------------ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1 + .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 18 +++++++++++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 37 ++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_common_data.h | 2 ++ 7 files changed, 71 insertions(+), 21 deletions(-)
arch/arm/mach-omap2/cclock2430_data.c +1 -0
@@ -1992,6 +1992,7 @@ static struct omap_clk omap2430_clks[] = {CLK (NULL ,"sdrc_ick" , &sdrc_ick,CK_243X ),CLK (NULL ,"des_ick" , &des_ick,CK_243X ),CLK ("omap-sham" ,"ick" , &sha_ick,CK_243X ), +CLK (NULL ,"sha_ick" , &sha_ick,CK_243X ),CLK ("omap_rng" ,"ick" , &rng_ick,CK_243X ),CLK (NULL ,"rng_ick" , &rng_ick,CK_243X ), CLK("omap-aes", "ick", &aes_ick, CK_243X),
arch/arm/mach-omap2/devices.c +11 -21
@@ -466,24 +466,6 @@ static void omap_init_rng(void) #if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE) -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_sham_resources[] = { - { - .start = OMAP24XX_SEC_SHA1MD5_BASE, - .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, - .flags = IORESOURCE_MEM, - }, - { - .start = 51 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; -static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources); -#else -#define omap2_sham_resources NULL -#define omap2_sham_resources_sz 0 -#endif - #ifdef CONFIG_ARCH_OMAP3 static struct resource omap3_sham_resources[] = { {
@@ -514,16 +496,24 @@ static struct platform_device sham_device = {static void omap_init_sham (void ) {if (cpu_is_omap24xx ()) { - sham_device.resource = omap2_sham_resources; - sham_device.num_resources = omap2_sham_resources_sz; +struct omap_hwmod *oh; +struct platform_device *pdev; + + oh =omap_hwmod_lookup ("sham" ); +if (!oh) +return ; + + pdev =omap_device_build ("omap-sham" ,-1 , oh,NULL ,0 ,NULL , +0 ,0 ); +WARN (IS_ERR (pdev),"Can't build omap_device for omap-sham\n" ); }else if (cpu_is_omap34xx ()) { sham_device.resource = omap3_sham_resources; sham_device.num_resources = omap3_sham_resources_sz; +platform_device_register (&sham_device); }else {pr_err ("%s: platform not supported\n" , __func__);return ; } -platform_device_register (&sham_device); }#else static inline void omap_init_sham (void ) { }
arch/arm/mach-omap2/omap_hwmod_2420_data.c +1 -0
@@ -605,6 +605,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc,
arch/arm/mach-omap2/omap_hwmod_2430_data.c +1 -0
@@ -963,6 +963,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL,
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +18 -0
@@ -138,6 +138,15 @@ static struct omap_hwmod_addr_space omap2_rng_addr_space[] = { { } }; +struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = { + { + .pa_start =0x480a4000 , + .pa_end =0x480a4000 +0x64 -1 , + .flags =ADDR_TYPE_RT + }, + { } +}; +/* * Common interconnect data */
@@ -389,3 +398,12 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = { .addr = omap2_rng_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; + +/* l4 core -> sham interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_sham_hwmod, + .clk ="sha_ick" , + .addr = omap2xxx_sham_addrs, + .user =OCP_USER_MPU , +};
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +37 -0
@@ -864,3 +864,40 @@ struct omap_hwmod omap2xxx_rng_hwmod = { .flags = HWMOD_INIT_NO_RESET, .class = &omap2_rng_hwmod_class, }; + +/* SHAM */ + +static struct omap_hwmod_class_sysconfig omap2_sham_sysc = { + .rev_offs =0x5c , + .sysc_offs =0x60 , + .syss_offs =0x64 , + .sysc_flags = (SYSC_HAS_SOFTRESET |SYSC_HAS_AUTOIDLE | +SYSS_HAS_RESET_STATUS ), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_sham_class = { + .name ="sham" , + .sysc = &omap2_sham_sysc, +}; + +struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = { + { .irq =51 +OMAP_INTC_START , }, + { .irq =-1 } +}; + +struct omap_hwmod omap2xxx_sham_hwmod = { + .name ="sham" , + .mpu_irqs = omap2_sham_mpu_irqs, + .main_clk ="l4_ck" , + .prcm = { + .omap2 = { + .module_offs =CORE_MOD , + .prcm_reg_id =4 , + .module_bit =OMAP24XX_EN_SHA_SHIFT , + .idlest_reg_id =4 , + .idlest_idle_bit =OMAP24XX_ST_SHA_SHIFT , + }, + }, + .class = &omap2xxx_sham_class, +};
arch/arm/mach-omap2/omap_hwmod_common_data.h +2 -0
@@ -78,6 +78,7 @@ extern struct omap_hwmod omap2xxx_mcspi2_hwmod;extern struct omap_hwmod omap2xxx_counter_32k_hwmod;extern struct omap_hwmod omap2xxx_gpmc_hwmod;extern struct omap_hwmod omap2xxx_rng_hwmod; +extern struct omap_hwmod omap2xxx_sham_hwmod;/* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
@@ -105,6 +106,7 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham;/* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
Signature · 1 line
1.7.12
PATCH 2/15 ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
The current OMAP2 SHAM support doesn't enable DMA so add that support so it can use DMA just like OMAP3.
--- arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +1 -1
@@ -405,5 +405,5 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { .slave = &omap2xxx_sham_hwmod, .clk = "sha_ick", .addr = omap2xxx_sham_addrs, - .user = OCP_USER_MPU, + .user = OCP_USER_MPU | OCP_USER_SDMA, };
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +6 -0
@@ -886,9 +886,15 @@ struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = { { .irq = -1 } }; +struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = { + { .name ="rx" , .dma_req =13 }, + { .dma_req =-1 } +}; +struct omap_hwmod omap2xxx_sham_hwmod = { .name ="sham" , .mpu_irqs = omap2_sham_mpu_irqs, + .sdma_reqs = omap2_sham_sdma_chs, .main_clk ="l4_ck" , .prcm = { .omap2 = {
Signature · 1 line
1.7.12
PATCH 3/15 ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP from explicit platform_data to hwmod.
--- arch/arm/mach-omap2/cclock3xxx_data.c | 1 + arch/arm/mach-omap2/devices.c | 41 +------------------ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 66 ++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 39 deletions(-)
arch/arm/mach-omap2/cclock3xxx_data.c +1 -0
@@ -3334,6 +3334,7 @@ static struct omap_clk omap3xxx_clks[] = {CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ),CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ),CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ), +CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ),CLK (NULL ,"des2_ick" , &des2_ick,CK_34XX |CK_36XX ),CLK ("omap_hsmmc.1" ,"ick" , &mmchs2_ick,CK_3XXX ), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
arch/arm/mach-omap2/devices.c +2 -39
58 lines not on this page · raw message
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +66 -0
78 lines not on this page · raw message
Signature · 1 line
1.7.12
Paul Walmsley
maintainerPATCH 3/15 ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod
Hi Mark,
Quoted 7 lines · Mark A. Greer
From: "Mark A. Greer" <[email protected]>
Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP from explicit
platform_datato hwmod.CC Paul Walmsley <[email protected]>Signed-off-by Mark A. Greer <[email protected]>
This one has been updated here to split the OMAP3xxx GP hwmod lists, as we discussed. Updated patch follows.
- Paul
From: "Mark A. Greer" <[email protected]>
Date: Fri, 21 Dec 2012 09:28:03 -0700
Subject: [PATCH] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to
hwmod
Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP from explicit platform_data to hwmod.
[paul at pwsan.com: updated to use per-SoC registration lists for GP-only hwmods;
fixed lines causing sparse warnings]
--- arch/arm/mach-omap2/cclock3xxx_data.c | 1 + arch/arm/mach-omap2/devices.c | 41 +---------- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 107 +++++++++++++++++++++++++--- 3 files changed, 101 insertions(+), 48 deletions(-)
arch/arm/mach-omap2/cclock3xxx_data.c +1 -0
@@ -3336,6 +3336,7 @@ static struct omap_clk omap3xxx_clks[] = {CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ),CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ),CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ), +CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ),CLK (NULL ,"des2_ick" , &des2_ick,CK_34XX |CK_36XX ),CLK ("omap_hsmmc.1" ,"ick" , &mmchs2_ick,CK_3XXX ), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
arch/arm/mach-omap2/devices.c +2 -39
58 lines not on this page · raw message
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +98 -9
149 lines not on this page · raw message
Signature · 1 line
1.7.10.4
PATCH 3/15 ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod
Quoted 6 lines · Paul Walmsley
Hi Mark,
Quoted 2 lines · Mark A. Greer
From: "Mark A. Greer" <[email protected]>
Quoted 8 lines
Quoted 5 lines
Convert the device data for the OMAP3 SHAM2 (SHA1/MD5) crypto IP from explicit
platform_datato hwmod.CC Paul Walmsley <[email protected]>Signed-off-by Mark A. Greer <[email protected]>This one has been updated here to split the OMAP3xxx GP hwmod lists, as we discussed. Updated patch follows.
Thanks Paul.
PATCH 4/15 ARM: OMAP2+: Remove unnecessary message when no SHA IP is present
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Remove the error message that prints when there is no SHA IP present to make it consistent with all the other IPs.
--- arch/arm/mach-omap2/devices.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)
arch/arm/mach-omap2/devices.c +7 -12
@@ -466,20 +466,15 @@ static void omap_init_rng(void)static void __init omap_init_sham (void ) { -if (cpu_is_omap24xx () ||cpu_is_omap34xx ()) { -struct omap_hwmod *oh; -struct platform_device *pdev; +struct omap_hwmod *oh; +struct platform_device *pdev; - oh =omap_hwmod_lookup ("sham" ); -if (!oh) -return ; + oh =omap_hwmod_lookup ("sham" ); +if (!oh) +return ; - pdev =omap_device_build ("omap-sham" ,-1 , oh,NULL ,0 ,NULL , -0 ,0 ); -WARN (IS_ERR (pdev),"Can't build omap_device for omap-sham\n" ); - }else { -pr_err ("%s: platform not supported\n" , __func__); - } + pdev =omap_device_build ("omap-sham" ,-1 , oh,NULL ,0 ,NULL ,0 ,0 ); +WARN (IS_ERR (pdev),"Can't build omap_device for omap-sham\n" ); }#if defined(CONFIG_CRYPTO_DEV_OMAP_AES ) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE )
Signature · 1 line
1.7.12
PATCH 5/15 ARM: OMAP2+: Only manually add hwmod data when DT not used.
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
The omap_init_sham() routine in devices.c only needs to be called when there is no device tree present.
--- arch/arm/mach-omap2/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/devices.c +1 -1
@@ -672,10 +672,10 @@ static int __init omap2_init_devices(void)omap_init_dmic ();omap_init_mcpdm ();omap_init_mcspi (); +omap_init_sham (); }omap_init_sti ();omap_init_rng (); -omap_init_sham ();omap_init_aes ();omap_init_vout ();omap_init_ocp2scp ();
Signature · 1 line
1.7.12
PATCH 6/15 ARM: AM33XX: Add sha0 crypto clock data
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Add clock data for for the SHA0 crypto module
on the am33xx SoC.
--- arch/arm/mach-omap2/cclock33xx_data.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/mach-omap2/cclock33xx_data.c +5 -0
@@ -412,6 +412,10 @@ static struct clk smartreflex1_fck;DEFINE_STRUCT_CLK_HW_OMAP (smartreflex1_fck,NULL );DEFINE_STRUCT_CLK (smartreflex1_fck, dpll_core_ck_parents, clk_ops_null); +static struct clk sha0_fck; +DEFINE_STRUCT_CLK_HW_OMAP (sha0_fck,NULL ); +DEFINE_STRUCT_CLK (sha0_fck, dpll_core_ck_parents, clk_ops_null); +/* * Modules clock nodes *
@@ -876,6 +880,7 @@ static struct omap_clk am33xx_clks[] = {CLK (NULL ,"mmu_fck" , &mmu_fck,CK_AM33XX ),CLK (NULL ,"smartreflex0_fck" , &smartreflex0_fck,CK_AM33XX ),CLK (NULL ,"smartreflex1_fck" , &smartreflex1_fck,CK_AM33XX ), +CLK (NULL ,"sha0_fck" , &sha0_fck,CK_AM33XX ),CLK (NULL ,"timer1_fck" , &timer1_fck,CK_AM33XX ),CLK (NULL ,"timer2_fck" , &timer2_fck,CK_AM33XX ), CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
Signature · 1 line
1.7.12
PATCH 7/15 ARM: AM33XX: hwmod: Update and uncomment SHA0 module data
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Update the SHA0 HIB2 module's hwmod data for the am33xx SoC. Also, remove it from the '#if 0' block that its currently inside so the data is actually available for use.
--- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 43 +++++++++++++++++++++++++----- 1 file changed, 37 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/omap_hwmod_33xx_data.c +37 -6
@@ -417,7 +417,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = {* - ocmc ram * - ocp watch point * - aes0 -* - sha0 */ #if 0 /*
@@ -543,22 +542,37 @@ static struct omap_hwmod am33xx_aes0_hwmod = { }, }, }; +#endif + +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = { + .rev_offs =0x100 , + .sysc_offs =0x110 , + .syss_offs =0x114 , + .sysc_flags =SYSS_HAS_RESET_STATUS , +}; -/* sha0 */ static struct omap_hwmod_class am33xx_sha0_hwmod_class = { .name ="sha0" , + .sysc = &am33xx_sha0_sysc, };static struct omap_hwmod_irq_info am33xx_sha0_irqs[] = { - { .irq =108 +OMAP_INTC_START , }, + { .irq =109 +OMAP_INTC_START , }, { .irq =-1 }, }; +struct omap_hwmod_dma_info am33xx_sha0_edma_reqs[] = { + { .name ="rx" , .dma_req =36 , }, + { .dma_req =-1 } +}; +static struct omap_hwmod am33xx_sha0_hwmod = { - .name ="sha0" , + .name ="sham" , .class = &am33xx_sha0_hwmod_class, .clkdm_name ="l3_clkdm" , .mpu_irqs = am33xx_sha0_irqs, + .sdma_reqs = am33xx_sha0_edma_reqs, .main_clk ="l3_gclk" , .prcm = { .omap4 = {
@@ -568,8 +582,6 @@ static struct omap_hwmod am33xx_sha0_hwmod = { }, }; -#endif -/* 'smartreflex' class */ static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = { .name ="smartreflex" ,
@@ -3328,6 +3340,24 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { .flags = OCPIF_SWSUP_IDLE, }; +/* l3 main -> sha0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = { + { + .pa_start =0x53100000 , + .pa_end =0x53100000 +SZ_512 -1 , + .flags =ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_sha0_hwmod, + .clk ="sha0_fck" , + .addr = am33xx_sha0_addrs, + .user =OCP_USER_MPU |OCP_USER_SDMA , +}; +static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[]__initdata = { &am33xx_l4_fw__emif_fw, &am33xx_l3_main__emif,
@@ -3401,6 +3431,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, &am33xx_cpgmac0__mdio, + &am33xx_l3_main__sha0, NULL, };
Signature · 1 line
1.7.12
PATCH 8/15 ARM: dts: Add SHAM data and documentation for AM33XX
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Add the generic AM33XX SHAM module's device tree data and enable it for the am335x-evm, am335x-evmsk, and am335x-bone platforms. Also add Documentation file describing the data for the SHAM module.
--- .../devicetree/bindings/crypto/omap-sham.txt | 35 ++++++++++++++++++++++ arch/arm/boot/dts/am335x-bone.dts | 4 +++ arch/arm/boot/dts/am335x-evm.dts | 4 +++ arch/arm/boot/dts/am335x-evmsk.dts | 4 +++ arch/arm/boot/dts/am33xx.dtsi | 12 ++++++++ 5 files changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
Documentation/devicetree/bindings/crypto/omap-sham.txt new file +35 -0
@@ -0,0 +1,35 @@ +OMAP SoC SHA crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SHAM versions: + - "ti,omap2-sham" for OMAP2 & OMAP3. + - "ti,omap4-sham" for OMAP4 and AM33XX. + Note that these two versions are incompatible. +- ti,hwmods: Name of the hwmod associated with the SHAM module +- reg : Offset and length of the register set for the module +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this module. +- interrupts : the interrupt number for the SHAM module. + +Optional properties: +- dmas: DMA controller phandle and DMA request ordered pair. + Only one rx pair is valid per SHAM module. +- dma-names: DMA request name. This string corresponds 1:1 with + the ordered pair in dmas. The string naming is to be + "rx" for RX request. + +Example: + /* AM335x */ + sham: sham at 53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53100000 0x200>; + interrupt-parent = <&intc>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + };
arch/arm/boot/dts/am335x-bone.dts +4 -0
@@ -192,3 +192,7 @@ &edma { ti,edma-xbar-event-map = <32 12>; }; + +&sham { + status = "okay"; +};
arch/arm/boot/dts/am335x-evm.dts +4 -0
@@ -259,3 +259,7 @@ reg = <0>; }; }; + +&sham { + status = "okay"; +};
arch/arm/boot/dts/am335x-evmsk.dts +4 -0
@@ -248,3 +248,7 @@ }; }; }; + +&sham { + status = "okay"; +};
arch/arm/boot/dts/am33xx.dtsi +12 -0
@@ -455,5 +455,17 @@ mac-address = [ 00 00 00 00 00 00 ]; }; }; + + sham: sham at 53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53100000 0x200>; + interrupt-parent = <&intc>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; }; };
Signature · 1 line
1.7.12
PATCH 9/15 ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Convert the device data for the OMAP2 AES crypto IP from explicit platform_data to hwmod.
--- arch/arm/mach-omap2/cclock2430_data.c | 3 +- arch/arm/mach-omap2/devices.c | 36 +++++++------------- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 + arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1 + .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 18 ++++++++++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 38 ++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_common_data.h | 2 ++ 7 files changed, 73 insertions(+), 26 deletions(-)
arch/arm/mach-omap2/cclock2430_data.c +2 -1
@@ -1995,7 +1995,8 @@ static struct omap_clk omap2430_clks[] = {CLK (NULL ,"sha_ick" , &sha_ick,CK_243X ),CLK ("omap_rng" ,"ick" , &rng_ick,CK_243X ),CLK (NULL ,"rng_ick" , &rng_ick,CK_243X ), -CLK ("omap-aes" ,"ick" , &aes_ick,CK_243X ), +CLK ("omap-aes" ,"ick" , &aes_ick,CK_243X ), +CLK (NULL ,"aes_ick" , &aes_ick,CK_243X ),CLK (NULL ,"pka_ick" , &pka_ick,CK_243X ),CLK (NULL ,"usb_fck" , &usb_fck,CK_243X ), CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
arch/arm/mach-omap2/devices.c +11 -25
@@ -479,28 +479,6 @@ static void __init omap_init_sham(void) #if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_aes_resources[] = { - { - .start = OMAP24XX_SEC_AES_BASE, - .end = OMAP24XX_SEC_AES_BASE + 0x4C, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP24XX_DMA_AES_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = OMAP24XX_DMA_AES_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); -#else -#define omap2_aes_resources NULL -#define omap2_aes_resources_sz 0 -#endif - #ifdef CONFIG_ARCH_OMAP3 static struct resource omap3_aes_resources[] = { {
@@ -531,16 +509,24 @@ static struct platform_device aes_device = {static void omap_init_aes (void ) {if (cpu_is_omap24xx ()) { - aes_device.resource = omap2_aes_resources; - aes_device.num_resources = omap2_aes_resources_sz; +struct omap_hwmod *oh; +struct platform_device *pdev; + + oh =omap_hwmod_lookup ("aes" ); +if (!oh) +return ; + + pdev =omap_device_build ("omap-aes" ,-1 , oh,NULL ,0 ,NULL , +0 ,0 ); +WARN (IS_ERR (pdev),"Can't build omap_device for omap-aes\n" ); }else if (cpu_is_omap34xx ()) { aes_device.resource = omap3_aes_resources; aes_device.num_resources = omap3_aes_resources_sz; +platform_device_register (&aes_device); }else {pr_err ("%s: platform not supported\n" , __func__);return ; } -platform_device_register (&aes_device); }#else
arch/arm/mach-omap2/omap_hwmod_2420_data.c +1 -0
@@ -606,6 +606,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__msdi1, &omap2xxx_l4_core__rng, &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc,
arch/arm/mach-omap2/omap_hwmod_2430_data.c +1 -0
@@ -964,6 +964,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__hdq1w, &omap2xxx_l4_core__rng, &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL,
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +18 -0
@@ -147,6 +147,15 @@ struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = { { } }; +struct omap_hwmod_addr_space omap2xxx_aes_addrs[] = { + { + .pa_start =0x480a6000 , + .pa_end =0x480a6000 +0x50 -1 , + .flags =ADDR_TYPE_RT + }, + { } +}; +/* * Common interconnect data */
@@ -407,3 +416,12 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { .addr = omap2xxx_sham_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; + +/* l4 core -> aes interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_aes_hwmod, + .clk ="aes_ick" , + .addr = omap2xxx_aes_addrs, + .user =OCP_USER_MPU |OCP_USER_SDMA , +};
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +38 -0
@@ -907,3 +907,41 @@ struct omap_hwmod omap2xxx_sham_hwmod = { }, .class = &omap2xxx_sham_class, }; + +/* AES */ + +static struct omap_hwmod_class_sysconfig omap2_aes_sysc = { + .rev_offs =0x44 , + .sysc_offs =0x48 , + .syss_offs =0x4c , + .sysc_flags = (SYSC_HAS_SOFTRESET |SYSC_HAS_AUTOIDLE | +SYSS_HAS_RESET_STATUS ), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_aes_class = { + .name ="aes" , + .sysc = &omap2_aes_sysc, +}; + +struct omap_hwmod_dma_info omap2_aes_sdma_chs[] = { + { .name ="tx" , .dma_req =9 }, + { .name ="rx" , .dma_req =10 }, + { .dma_req =-1 } +}; + +struct omap_hwmod omap2xxx_aes_hwmod = { + .name ="aes" , + .sdma_reqs = omap2_aes_sdma_chs, + .main_clk ="l4_ck" , + .prcm = { + .omap2 = { + .module_offs =CORE_MOD , + .prcm_reg_id =4 , + .module_bit =OMAP24XX_EN_AES_SHIFT , + .idlest_reg_id =4 , + .idlest_idle_bit =OMAP24XX_ST_AES_SHIFT , + }, + }, + .class = &omap2xxx_aes_class, +};
arch/arm/mach-omap2/omap_hwmod_common_data.h +2 -0
@@ -79,6 +79,7 @@ extern struct omap_hwmod omap2xxx_counter_32k_hwmod;extern struct omap_hwmod omap2xxx_gpmc_hwmod;extern struct omap_hwmod omap2xxx_rng_hwmod;extern struct omap_hwmod omap2xxx_sham_hwmod; +extern struct omap_hwmod omap2xxx_aes_hwmod;/* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
@@ -107,6 +108,7 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes;/* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
Signature · 1 line
1.7.12
PATCH 10/15 ARM: OMAP3xxx: hwmod: Convert AES crypto device data to hwmod
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Convert the device data for the OMAP3 AES crypto IP from explicit platform_data to hwmod.
--- arch/arm/mach-omap2/cclock3xxx_data.c | 3 +- arch/arm/mach-omap2/devices.c | 42 +------------------- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 62 ++++++++++++++++++++++++++++++ 3 files changed, 66 insertions(+), 41 deletions(-)
arch/arm/mach-omap2/cclock3xxx_data.c +2 -1
@@ -3332,7 +3332,8 @@ static struct omap_clk omap3xxx_clks[] = {CLK ("omap_hsmmc.2" ,"ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"mmchs3_ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ), -CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ), +CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ), +CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_36XX ),CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ),CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ), CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX),
arch/arm/mach-omap2/devices.c +2 -40
60 lines not on this page · raw message
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +62 -0
74 lines not on this page · raw message
Signature · 1 line
1.7.12
PATCH 11/15 ARM: OMAP2+: Remove unnecessary message when no AES IP is present
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Remove the error message that prints when there is no AES IP present to make it consistent with all the other IPs.
--- arch/arm/mach-omap2/devices.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)
arch/arm/mach-omap2/devices.c +9 -14
@@ -479,20 +479,15 @@ static void __init omap_init_sham(void)static void __init omap_init_aes (void ) { -if (cpu_is_omap24xx () ||cpu_is_omap34xx ()) { -struct omap_hwmod *oh; -struct platform_device *pdev; - - oh =omap_hwmod_lookup ("aes" ); -if (!oh) -return ; - - pdev =omap_device_build ("omap-aes" ,-1 , oh,NULL ,0 ,NULL , -0 ,0 ); -WARN (IS_ERR (pdev),"Can't build omap_device for omap-aes\n" ); - }else { -pr_err ("%s: platform not supported\n" , __func__); - } +struct omap_hwmod *oh; +struct platform_device *pdev; + + oh =omap_hwmod_lookup ("aes" ); +if (!oh) +return ; + + pdev =omap_device_build ("omap-aes" ,-1 , oh,NULL ,0 ,NULL ,0 ,0 ); +WARN (IS_ERR (pdev),"Can't build omap_device for omap-aes\n" ); }/*-------------------------------------------------------------------------*/
Signature · 1 line
1.7.12
PATCH 12/15 ARM: OMAP2+: Only manually add hwmod data when DT not used.
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
The omap_init_aes() routine in devices.c only needs to be called when there is no device tree present.
--- arch/arm/mach-omap2/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/devices.c +1 -1
@@ -616,10 +616,10 @@ static int __init omap2_init_devices(void)omap_init_mcpdm ();omap_init_mcspi ();omap_init_sham (); +omap_init_aes (); }omap_init_sti ();omap_init_rng (); -omap_init_aes ();omap_init_vout ();omap_init_ocp2scp ();
Signature · 1 line
1.7.12
PATCH 13/15 ARM: AM33XX: Add aes0 crypto clock data
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Add clock data for for the SHA0 crypto module
on the am33xx SoC.
--- arch/arm/mach-omap2/cclock33xx_data.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/mach-omap2/cclock33xx_data.c +5 -0
@@ -416,6 +416,10 @@ static struct clk sha0_fck;DEFINE_STRUCT_CLK_HW_OMAP (sha0_fck,NULL );DEFINE_STRUCT_CLK (sha0_fck, dpll_core_ck_parents, clk_ops_null); +static struct clk aes0_fck; +DEFINE_STRUCT_CLK_HW_OMAP (aes0_fck,NULL ); +DEFINE_STRUCT_CLK (aes0_fck, dpll_core_ck_parents, clk_ops_null); +/* * Modules clock nodes *
@@ -881,6 +885,7 @@ static struct omap_clk am33xx_clks[] = {CLK (NULL ,"smartreflex0_fck" , &smartreflex0_fck,CK_AM33XX ),CLK (NULL ,"smartreflex1_fck" , &smartreflex1_fck,CK_AM33XX ),CLK (NULL ,"sha0_fck" , &sha0_fck,CK_AM33XX ), +CLK (NULL ,"aes0_fck" , &aes0_fck,CK_AM33XX ),CLK (NULL ,"timer1_fck" , &timer1_fck,CK_AM33XX ),CLK (NULL ,"timer2_fck" , &timer2_fck,CK_AM33XX ), CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
Signature · 1 line
1.7.12
PATCH 13/15 ARM: AM33XX: Add aes0 crypto clock data
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark A Greer <[email protected]> writes:
Mark> From: "Mark A. Greer" <[email protected]> Mark> Add clock data for for the SHA0 crypto module
s/SHA/AES/
Mark> +static struct clk aes0_fck;
Mark> +DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
Mark> +DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
Signature · 1 line
Bye, Peter Korsgaard
PATCH 14/15 ARM: AM33XX: hwmod: Update and uncomment AES0 module data
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Update the AES0 HIB2 module's hwmod data for the am33xx SoC. Also, remove it from the '#if 0' block that its currently inside so the data is actually available for use.
--- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 51 ++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 9 deletions(-)
arch/arm/mach-omap2/omap_hwmod_33xx_data.c +42 -9
@@ -416,7 +416,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = {* - debugss * - ocmc ram * - ocp watch point -* - aes0 */ #if 0 /*
@@ -516,25 +515,41 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = { }, }, }; +#endif /* -* 'aes' class +* 'aes0' class */ -static struct omap_hwmod_class am33xx_aes_hwmod_class = { - .name ="aes" , +static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { + .rev_offs =0x80 , + .sysc_offs =0x84 , + .syss_offs =0x88 , + .sysc_flags =SYSS_HAS_RESET_STATUS , +}; + +static struct omap_hwmod_class am33xx_aes0_hwmod_class = { + .name ="aes0" , + .sysc = &am33xx_aes0_sysc, };static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = { - { .irq =102 +OMAP_INTC_START , }, + { .irq =103 +OMAP_INTC_START , }, { .irq =-1 }, }; +struct omap_hwmod_dma_info am33xx_aes0_edma_reqs[] = { + { .name ="tx" , .dma_req =6 , }, + { .name ="rx" , .dma_req =5 , }, + { .dma_req =-1 } +}; +static struct omap_hwmod am33xx_aes0_hwmod = { - .name ="aes0" , - .class = &am33xx_aes_hwmod_class, + .name ="aes" , + .class = &am33xx_aes0_hwmod_class, .clkdm_name ="l3_clkdm" , .mpu_irqs = am33xx_aes0_irqs, - .main_clk ="l3_gclk" , + .sdma_reqs = am33xx_aes0_edma_reqs, + .main_clk ="aes0_fck" , .prcm = { .omap4 = { .clkctrl_offs =AM33XX_CM_PER_AES0_CLKCTRL_OFFSET ,
@@ -542,7 +557,6 @@ static struct omap_hwmod am33xx_aes0_hwmod = { }, }, }; -#endif /* sha0 HIB2 (the 'P' (public) device) */ static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
@@ -3358,6 +3372,24 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3 main -> AES0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = { + { + .pa_start =0x53500000 , + .pa_end =0x53500000 +SZ_1M -1 , + .flags =ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_aes0_hwmod, + .clk ="aes0_fck" , + .addr = am33xx_aes0_addrs, + .user =OCP_USER_MPU |OCP_USER_SDMA , +}; +static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[]__initdata = { &am33xx_l4_fw__emif_fw, &am33xx_l3_main__emif,
@@ -3432,6 +3464,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_hs__cpgmac0, &am33xx_cpgmac0__mdio, &am33xx_l3_main__sha0, + &am33xx_l3_main__aes0, NULL, };
Signature · 1 line
1.7.12
PATCH 15/15 ARM: dts: Add AES data and documentation for AM33XX
In reply to Mark A. GreerFrom: "Mark A. Greer" <[email protected]>
Add the generic AM33XX AES module's device tree data and enable it for the am335x-evm, am335x-evmsk, and am335x-bone platforms. Also add Documentation file describing the data for the AES module.
--- .../devicetree/bindings/crypto/omap-aes.txt | 37 ++++++++++++++++++++++ arch/arm/boot/dts/am335x-bone.dts | 4 +++ arch/arm/boot/dts/am335x-evm.dts | 4 +++ arch/arm/boot/dts/am335x-evmsk.dts | 4 +++ arch/arm/boot/dts/am33xx.dtsi | 13 ++++++++ 5 files changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt
Documentation/devicetree/bindings/crypto/omap-aes.txt new file +37 -0
@@ -0,0 +1,37 @@ +OMAP SoC AES crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + AES versions: + - "ti,omap2-aes" for OMAP2. + - "ti,omap3-aes" for OMAP3. + - "ti,omap4-aes" for OMAP4 and AM33XX. + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports + more algorithms) but they are incompatible with OMAP4. +- ti,hwmods: Name of the hwmod associated with the AES odule +- reg : Offset and length of the register set for the module +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this module. +- interrupts : the interrupt number for the AES odule. + +Optional properties: +- dmas: DMA controller phandle and DMA request ordered pairs. +- dma-names: DMA request names. This string corresponds 1:1 with + the ordered pairs in dmas. The string naming is to be + "tx" for TX request and "rx" for RX request. + +Example: + /* AM335x */ + aes: aes at 53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53500000 0xa0>; + interrupt-parent = <&intc>; + interrupts = <102>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + };
arch/arm/boot/dts/am335x-bone.dts +4 -0
@@ -196,3 +196,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +};
arch/arm/boot/dts/am335x-evm.dts +4 -0
@@ -263,3 +263,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +};
arch/arm/boot/dts/am335x-evmsk.dts +4 -0
@@ -252,3 +252,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +};
arch/arm/boot/dts/am33xx.dtsi +13 -0
@@ -467,5 +467,18 @@ dmas = <&edma 36>; dma-names = "rx"; }; + + aes: aes at 53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53500000 0xa0>; + interrupt-parent = <&intc>; + interrupts = <102>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + }; }; };
Signature · 1 line
1.7.12
cover OMAP SHAM & AES Crypto Updates
In reply to Mark A. GreerQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark A Greer <[email protected]> writes:
Mark> From: "Mark A. Greer" <[email protected]> Mark> [This series supersedes the hwmod related patches sent in the Mark> "crypto: omap-sham updates" and "crypto: omap-aes updates" Mark> series a few weeks ago.]
Mark> This series adds hwmod support for the OMAP SHAM and AES Mark> modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also Mark> adds device tree info for those modules.
Huh, does am335x have a sham module? I don't see any mention of that in spruh73g.pdf
Signature · 1 line
Bye, Peter Korsgaard
cover OMAP SHAM & AES Crypto Updates
Quoted 7 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark A Greer <[email protected]> writes:
Mark> From: "Mark A. Greer" <[email protected]> Mark> [This series supersedes the hwmod related patches sent in the Mark> "crypto: omap-sham updates" and "crypto: omap-aes updates" Mark> series a few weeks ago.]
Quoted 6 lines
Mark> This series adds hwmod support for the OMAP SHAM and AES Mark> modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also Mark> adds device tree info for those modules.
Huh, does am335x have a sham module? I don't see any mention of that in spruh73g.pdf
Yes. It has sham, aes, and rng modules.
They are not described in the TRM. In fact, I had to use the omap4 description (closely guarded by TI) because AFAIK there isn't a doc for the am33xx. The am33xx modules are identical to the omap4 ones except for the register addresses and dma channels so that doc worked.
Mark
--
cover OMAP SHAM & AES Crypto Updates
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark A Greer <[email protected]> writes:
Hi,
Quoted 2 lines
Quoted 2 lines
Huh, does am335x have a sham module? I don't see any mention of that in spruh73g.pdf
Mark> Yes. It has sham, aes, and rng modules.
Ok, interesting.
Mark> They are not described in the TRM. In fact, I had to use the Mark> omap4 description (closely guarded by TI) because AFAIK there Mark> isn't a doc for the am33xx. The am33xx modules are identical to Mark> the omap4 ones except for the register addresses and dma channels Mark> so that doc worked.
Odd. How did you figure out the am335x base address / dma channels?
Signature · 1 line
Bye, Peter Korsgaard
cover OMAP SHAM & AES Crypto Updates
Quoted 17 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark A Greer <[email protected]> writes:
Hi,
Quoted 2 lines
Quoted 2 lines
Huh, does am335x have a sham module? I don't see any mention of that in spruh73g.pdf
Mark> Yes. It has sham, aes, and rng modules.
Ok, interesting.
Mark> They are not described in the TRM. In fact, I had to use the Mark> omap4 description (closely guarded by TI) because AFAIK there Mark> isn't a doc for the am33xx. The am33xx modules are identical to Mark> the omap4 ones except for the register addresses and dma channels Mark> so that doc worked.
Quoted 3 lines
Odd. How did you figure out the am335x base address / dma channels?
From the SDK code. :)
That is, the am335x evm SDK from TI. I looked at it to determine the addresses, etc.
Mark
--
Paul Walmsley
maintainercover OMAP SHAM & AES Crypto Updates
In reply to Mark A. GreerHi Mark,
Quoted 9 lines · Mark A. Greer
From: "Mark A. Greer" <[email protected]>
[This series supersedes the hwmod related patches sent in the
"crypto: omap-sham updates" and "crypto: omap-aes updates" series a few weeks ago.]This series adds hwmod support for the OMAP SHAM and AES modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also adds device tree info for those modules.
Thanks for working on this, this will get us much closer to being able to convert the hwmod code into an OMAP bus. I haven't looked closely at these patches yet, but a few comments/questions:
- Looks like the two DTS patches are the ones with direct dependencies on the DMA Engine support patches that you mentioned. Any objection to me taking the series without those two patches? Then once the DMA Engine series goes in, maybe those AM33xx DTS patches can go up?
- The patch series causes AM3517/3505 to crash. I'd guess this is due to the SHAM/AES modules being initialized on those chips, but they probably don't exist there. Can you change the initialization for those on OMAP3 to only take place on OMAP34xx/36xx GP? I guess you'd need to create new lists for those in the hwmod init.
- Paul
cover OMAP SHAM & AES Crypto Updates
Quoted 14 lines · Paul Walmsley
Hi Mark,
Quoted 9 lines · Mark A. Greer
From: "Mark A. Greer" <[email protected]>
[This series supersedes the hwmod related patches sent in the
"crypto: omap-sham updates" and "crypto: omap-aes updates" series a few weeks ago.]This series adds hwmod support for the OMAP SHAM and AES modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also adds device tree info for those modules.
Quoted 6 lines
Thanks for working on this, this will get us much closer to being able to convert the hwmod code into an OMAP bus. I haven't looked closely at these patches yet, but a few comments/questions:
- Looks like the two DTS patches are the ones with direct dependencies on the DMA Engine support patches that you mentioned.
The patch(es) that convert the drivers to use dma_request_slave_channel_compat() will cause problems too if the patch that adds that call isn't in your branch. AFAIK, this is the latest version, https://patchwork.kernel.org/patch/1459231/ from Jon Hunter.
Quoted 3 lines
Any objection to me
taking the series without those two patches? Then once the DMA Engine series goes in, maybe those AM33xx DTS patches can go up?
No, no objections at all. I will track/resubmit/whatever the ones that need to go in later.
Quoted 5 lines
- The patch series causes AM3517/3505 to crash. I'd guess this is due to the SHAM/AES modules being initialized on those chips, but they probably don't exist there. Can you change the initialization for those on OMAP3 to only take place on OMAP34xx/36xx GP? I guess you'd need to create new lists for those in the hwmod init.
Oh. :(
Sure, I'll do what you suggest when I'm back to work in the new year.
Thanks Paul.
Mark
--
cover OMAP SHAM & AES Crypto Updates
Quoted 19 lines · Mark A. Greer
Quoted 18 lines · Paul Walmsley
Hi Mark,
Quoted 9 lines · Mark A. Greer
From: "Mark A. Greer" <[email protected]>
[This series supersedes the hwmod related patches sent in the
"crypto: omap-sham updates" and "crypto: omap-aes updates" series a few weeks ago.]This series adds hwmod support for the OMAP SHAM and AES modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also adds device tree info for those modules.
Thanks for working on this, this will get us much closer to being able to convert the hwmod code into an OMAP bus. I haven't looked closely at these patches yet, but a few comments/questions:
Quoted 8 lines
Quoted 2 lines
- Looks like the two DTS patches are the ones with direct dependencies on the DMA Engine support patches that you mentioned.
The patch(es) that convert the drivers to use
dma_request_slave_channel_compat()will cause problems too if the patch that adds that call isn't in your branch. AFAIK, this is the latest version, https://patchwork.kernel.org/patch/1459231/ from Jon Hunter.
Oops, sorry, please disregard this comment. I had the wrong patchset in mind when I wrote it.
Mark
--
cover OMAP SHAM & AES Crypto Updates
In reply to Paul WalmsleyQuoted 1 line · Paul Walmsley
Hi Mark,
Hi Paul.
Quoted 16 lines · Mark A. Greer
Quoted 10 lines
From: "Mark A. Greer" <[email protected]>
[This series supersedes the hwmod related patches sent in the
"crypto: omap-sham updates" and "crypto: omap-aes updates" series a few weeks ago.]This series adds hwmod support for the OMAP SHAM and AES modules on OMAP2, OMAP3, and OMAP4/AM33XX SoCs. It also adds device tree info for those modules.
Thanks for working on this, this will get us much closer to being able to convert the hwmod code into an OMAP bus. I haven't looked closely at these patches yet, but a few comments/questions:
Quoted 5 lines
- The patch series causes AM3517/3505 to crash. I'd guess this is due to the SHAM/AES modules being initialized on those chips, but they probably don't exist there. Can you change the initialization for those on OMAP3 to only take place on OMAP34xx/36xx GP? I guess you'd need to create new lists for those in the hwmod init.
All am35xx GPs have the SHAM and AES modules except some very old ones. I've been told that there should be very few of the "old" ones around (I don't know how to differentiate them). We're likely safe since the SHAM & AES modules are not enabled in omap2plus_defconfig so nobody should be enabling them on an am35xx unless they know that they have the modules. Do you agree?
The issue that you're likely running into is that 'CK_AM35XX' needs to be
added for aes2_ick & sha12_ick in cclock3xxx_data.c. The following
patch should fix it (applies to my submitted/crypto/hwmod branch):
arch/arm/mach-omap2/cclock3xxx_data.c +4 -4
@@ -3332,10 +3332,10 @@ static struct omap_clk omap3xxx_clks[] = {CLK ("omap_hsmmc.2" ,"ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"mmchs3_ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ), -CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ), +CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ),CLK (NULL ,"des2_ick" , &des2_ick,CK_34XX |CK_36XX ),CLK ("omap_hsmmc.1" ,"ick" , &mmchs2_ick,CK_3XXX ), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
Please let me know if this patch works for you and, if it does, I'll respin my patches to add those changes.
Thanks,
Mark
--
Paul Walmsley
maintainercover OMAP SHAM & AES Crypto Updates
Hi Mark,
I regret the delay,
Quoted 8 lines · Mark A. Greer
Quoted 5 lines · Paul Walmsley
- The patch series causes AM3517/3505 to crash. I'd guess this is due to the SHAM/AES modules being initialized on those chips, but they probably don't exist there. Can you change the initialization for those on OMAP3 to only take place on OMAP34xx/36xx GP? I guess you'd need to create new lists for those in the hwmod init.
Quoted 6 lines
All am35xx GPs have the SHAM and AES modules except some very old ones. I've been told that there should be very few of the "old" ones around (I don't know how to differentiate them). We're likely safe since the SHAM & AES modules are not enabled in
omap2plus_defconfigso nobody should be enabling them on an am35xx unless they know that they have the modules. Do you agree?
Those will presumably only enable or disable the device drivers. The hwmod code will probably still try to write to those IP blocks if they are listed as present in the hwmod data, during the initial reset-and-idle phase.
What do you think about adding an am35xx_es11plus_hwmod_ocp_ifs[] array to omap_hwmod_3xxx_data.c for these secure hwmods? That carries the implicit and possibly wrong assumption that it's likely to be ES1.0 devices that are missing the SHAM/AES, but it seems unlikely that TI would have multiple silicon revs running around claiming to be ES1.1? Or maybe I'm just being na?ve.
Quoted 25 lines
The issue that you're likely running into is that '
CK_AM35XX' needs to be
added foraes2_ick&sha12_ickincclock3xxx_data.c. The following
patch should fix it (applies to my submitted/crypto/hwmod branch):arch/arm/mach-omap2/cclock3xxx_data.c +4
-4@@ -3332,10 +3332,10 @@ static struct omap_clk omap3xxx_clks[] = {CLK ("omap_hsmmc.2" ,"ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"mmchs3_ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ), -CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ), +CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ),CLK (NULL ,"des2_ick" , &des2_ick,CK_34XX |CK_36XX ),CLK ("omap_hsmmc.1" ,"ick" , &mmchs2_ick,CK_3XXX ), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
Quoted 2 lines
Please let me know if this patch works for you and, if it does, I'll respin my patches to add those changes.
If those clocks are referenced by the hwmods, that that patch makes sense to me. Haven't had the chance to test it yet but maybe tomorrow. On the other hand it looks 'obviously correct' so maybe just add that change to your patches and repost that one?
- Paul
cover OMAP SHAM & AES Crypto Updates
Quoted 1 line · Paul Walmsley
Hi Mark,
Hi Paul.
Quoted 19 lines
I regret the delay,
Quoted 8 lines · Mark A. Greer
Quoted 5 lines · Paul Walmsley
- The patch series causes AM3517/3505 to crash. I'd guess this is due to the SHAM/AES modules being initialized on those chips, but they probably don't exist there. Can you change the initialization for those on OMAP3 to only take place on OMAP34xx/36xx GP? I guess you'd need to create new lists for those in the hwmod init.
Quoted 6 lines
All am35xx GPs have the SHAM and AES modules except some very old ones. I've been told that there should be very few of the "old" ones around (I don't know how to differentiate them). We're likely safe since the SHAM & AES modules are not enabled in
omap2plus_defconfigso nobody should be enabling them on an am35xx unless they know that they have the modules. Do you agree?
Quoted 4 lines
Those will presumably only enable or disable the device drivers. The hwmod code will probably still try to write to those IP blocks if they are listed as present in the hwmod data, during the initial reset-and-idle phase.
Um, yeah, good point. :)
Quoted 6 lines
What do you think about adding an am35xx_es11plus_hwmod_ocp_ifs[] array to
omap_hwmod_3xxx_data.cfor these secure hwmods? That carries the implicit and possibly wrong assumption that it's likely to be ES1.0 devices that are missing the SHAM/AES, but it seems unlikely that TI would have multiple silicon revs running around claiming to be ES1.1? Or maybe I'm just being na?ve.
Something like that makes sense to me. I'll re-read my email, etc. and see if I can find something to help us figure it out.
Quoted 25 lines
Quoted 25 lines
The issue that you're likely running into is that '
CK_AM35XX' needs to be
added foraes2_ick&sha12_ickincclock3xxx_data.c. The following
patch should fix it (applies to my submitted/crypto/hwmod branch):arch/arm/mach-omap2/cclock3xxx_data.c +4
-4@@ -3332,10 +3332,10 @@ static struct omap_clk omap3xxx_clks[] = {CLK ("omap_hsmmc.2" ,"ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"mmchs3_ick" , &mmchs3_ick,CK_3430ES2PLUS |CK_AM35XX |CK_36XX ),CLK (NULL ,"icr_ick" , &icr_ick,CK_34XX |CK_36XX ), -CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_36XX ), -CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_36XX ), -CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_36XX ), +CLK ("omap-aes" ,"ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"aes2_ick" , &aes2_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK ("omap-sham" ,"ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ), +CLK (NULL ,"sha12_ick" , &sha12_ick,CK_34XX |CK_AM35XX |CK_36XX ),CLK (NULL ,"des2_ick" , &des2_ick,CK_34XX |CK_36XX ),CLK ("omap_hsmmc.1" ,"ick" , &mmchs2_ick,CK_3XXX ), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
Quoted 7 lines
Quoted 2 lines
Please let me know if this patch works for you and, if it does, I'll respin my patches to add those changes.
If those clocks are referenced by the hwmods, that that patch makes sense to me. Haven't had the chance to test it yet but maybe tomorrow. On the other hand it looks 'obviously correct' so maybe just add that change to your patches and repost that one?
Will do.
Mark
--
cover OMAP SHAM & AES Crypto Updates
Quoted 4 lines · Mark A. Greer
Quoted 1 line · Paul Walmsley
Hi Mark,
Hi Paul.
Hi again, Paul. Sorry for the delay, I've been under the weather.
Quoted 13 lines
Quoted 4 lines
I regret the delay,
On Tue, 8 Jan 2013, Mark A. Greer wrote:
Quoted 8 lines
Quoted 1 line · Paul Walmsley
What do you think about adding an am35xx_es11plus_hwmod_ocp_ifs[] array to
omap_hwmod_3xxx_data.cfor these secure hwmods? That carries the implicit and possibly wrong assumption that it's likely to be ES1.0 devices that are missing the SHAM/AES, but it seems unlikely that TI would have multiple silicon revs running around claiming to be ES1.1? Or maybe I'm just being na?ve.
Quoted 2 lines
Something like that makes sense to me. I'll re-read my email, etc. and see if I can find something to help us figure it out.
I couldn't find any information that helped with this so AFAIK there is no good way to tell if a particular am35xx has the crypto hardware available or not. At this point, I vote for moving 'omap3xxx_l4_core__sham' and 'omap3xxx_l4_core__aes' from omap3xxx_gp_hwmod_ocp_ifs[] and putting them in omap34xx_hwmod_ocp_ifs[] and omap36xx_hwmod_ocp_ifs[]. That should be safe in general and if someone with an am35xx wants to use those modules, they can edit am35xx_hwmod_ocp_ifs[] locally.
What do you think?
Paul Walmsley
maintainercover OMAP SHAM & AES Crypto Updates
Hi Mark
Quoted 13 lines · Mark A. Greer
Quoted 12 lines · Mark A. Greer
Quoted 10 lines · Paul Walmsley
Quoted 1 line · Mark A. Greer
On Sun, Dec 23, 2012 at 08:40:43AM +0000, Paul Walmsley wrote:
What do you think about adding an am35xx_es11plus_hwmod_ocp_ifs[] array to
omap_hwmod_3xxx_data.cfor these secure hwmods? That carries the implicit and possibly wrong assumption that it's likely to be ES1.0 devices that are missing the SHAM/AES, but it seems unlikely that TI would have multiple silicon revs running around claiming to be ES1.1? Or maybe I'm just being na?ve.
Quoted 6 lines
Quoted 2 lines
Something like that makes sense to me. I'll re-read my email, etc. and see if I can find something to help us figure it out.
I couldn't find any information that helped with this so AFAIK there is no good way to tell if a particular am35xx has the crypto hardware available or not.
I was thinking that we might assume that they are present on AM35xx ES1.1+. If the TI folks are saying that they aren't available on only a few early devices, I'd guess that means ES1.0. I personally have never seen an ES1.0 AM35xx device...
Discriminating between ES1.0 and ES1.1+ should be pretty easy in the hwmod init...
Quoted 3 lines
At this point, I vote for moving '
omap3xxx_l4_core__sham' and
'omap3xxx_l4_core__aes' from omap3xxx_gp_hwmod_ocp_ifs[] and putting them in omap34xx_hwmod_ocp_ifs[] and omap36xx_hwmod_ocp_ifs[].
I'm pretty sure that's going to break on HS OMAPs, like the HS OMAP3430 in the N900. I don't think those IP blocks are directly accessible from Linux on most HS setups, although this might vary by device. I'd feel more comfortable if you created an omap34xx_gp_hwmod_ocp_ifs[] list and an omap36xx_gp_hwmod_ocp_ifs[] list. We should probably get rid of omap3xxx_gp_hwmod_ocp_ifs[] altogether.
Quoted 2 lines
That should be safe in general and if someone with an am35xx wants to use those modules, they can edit am35xx_hwmod_ocp_ifs[] locally.
If you want to just leave them commented in am35xx_hwmod_ocp_ifs[], rather than enabling them for ES1.1+ AM35xx, that's fine with me too, since we don't know that they are ES-level-based. Maybe put a comment there that says that these are likely to be present, but no one seems to know for certain? Seems ludicrous, but I guess that's what we're reduced to!
- Paul
cover OMAP SHAM & AES Crypto Updates
Quoted 43 lines · Paul Walmsley
Hi Mark
Quoted 13 lines · Mark A. Greer
Quoted 12 lines · Mark A. Greer
Quoted 10 lines · Paul Walmsley
Quoted 1 line · Mark A. Greer
On Sun, Dec 23, 2012 at 08:40:43AM +0000, Paul Walmsley wrote:
What do you think about adding an am35xx_es11plus_hwmod_ocp_ifs[] array to
omap_hwmod_3xxx_data.cfor these secure hwmods? That carries the implicit and possibly wrong assumption that it's likely to be ES1.0 devices that are missing the SHAM/AES, but it seems unlikely that TI would have multiple silicon revs running around claiming to be ES1.1? Or maybe I'm just being na?ve.Quoted 6 lines
Quoted 2 lines
Something like that makes sense to me. I'll re-read my email, etc. and see if I can find something to help us figure it out.
I couldn't find any information that helped with this so AFAIK there is no good way to tell if a particular am35xx has the crypto hardware available or not.
I was thinking that we might assume that they are present on AM35xx ES1.1+. If the TI folks are saying that they aren't available on only a few early devices, I'd guess that means ES1.0. I personally have never seen an ES1.0 AM35xx device...
Discriminating between ES1.0 and ES1.1+ should be pretty easy in the hwmod init...
Quoted 3 lines
At this point, I vote for moving '
omap3xxx_l4_core__sham' and
'omap3xxx_l4_core__aes' from omap3xxx_gp_hwmod_ocp_ifs[] and putting them in omap34xx_hwmod_ocp_ifs[] and omap36xx_hwmod_ocp_ifs[].I'm pretty sure that's going to break on HS OMAPs, like the HS OMAP3430 in the N900. I don't think those IP blocks are directly accessible from Linux on most HS setups, although this might vary by device. I'd feel more comfortable if you created an omap34xx_gp_hwmod_ocp_ifs[] list and an omap36xx_gp_hwmod_ocp_ifs[] list. We should probably get rid of omap3xxx_gp_hwmod_ocp_ifs[] altogether.
Quoted 8 lines
Quoted 2 lines
That should be safe in general and if someone with an am35xx wants to use those modules, they can edit am35xx_hwmod_ocp_ifs[] locally.
If you want to just leave them commented in am35xx_hwmod_ocp_ifs[], rather than enabling them for ES1.1+ AM35xx, that's fine with me too, since we don't know that they are ES-level-based. Maybe put a comment there that says that these are likely to be present, but no one seems to know for certain? Seems ludicrous, but I guess that's what we're reduced to!
Thanks Paul. I will have some patches early next week.
Mark
--
Paul Walmsley
maintainercover OMAP SHAM & AES Crypto Updates
Hi Mark,
just FYI, these patches caused several warnings from sparse:
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c:141:30: warning:
symbol 'omap2xxx_sham_addrs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c:150:30: warning:
symbol 'omap2xxx_aes_addrs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c:884:28: warning:
symbol 'omap2_sham_mpu_irqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c:889:28: warning:
symbol 'omap2_sham_sdma_chs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c:927:28: warning:
symbol 'omap2_aes_sdma_chs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_33xx_data.c:540:28: warning: symbol
'am33xx_aes0_edma_reqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_33xx_data.c:579:28: warning: symbol
'am33xx_sha0_edma_reqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c:3564:28: warning: symbol
'omap3_sham_mpu_irqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c:3569:28: warning: symbol
'omap3_sham_sdma_reqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c:3574:19: warning: symbol
'omap3xxx_sham_hwmod' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c:3630:28: warning: symbol
'omap3_aes_sdma_reqs' was not declared. Should it be static?
Quoted 1 line
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c:3636:19: warning: symbol
'omap3xxx_aes_hwmod' was not declared. Should it be static?
I've fixed them up here, but please don't forget to make sure that patches don't add any sparse warnings. sparse info is here:
https://sparse.wiki.kernel.org/index.php/Main_Page
regards,
- Paul