/proc/cpuinfo reports wrong frequency (compared to cpufreq-info)
A message that is not in the archive (sent off-list or not yet received): [email protected]/
https://bugzilla.kernel.org/show_bug.cgi?id=42924
Len Brown <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Component|Config-Processors |cpufreq
Resolution| |DOCUMENTED
AssignedTo|[email protected] |[email protected]
Product|ACPI |Power Management--- Comment #2 from Len Brown <[email protected]> 2013-01-29 03:48:21 --- turbostat tells the truth about what the HW is doing.
So in this case, all 4 threads (2 cores) are running at 3.3 GHz.
cpufreq is showing you 2.8 b/c that is what the OS requested. It doesn't know that turbo HW can deliver 3.3 when it requests 2.801.
Also, on multi-core systems, the voltage is raised to support the highest frequency request and all the cores run at that frequency. Here 3 cpus asked for 2.8 and cpu0 asked for 800. But cpu0 will run at the same speed of the others even though it last requested less.
This is a longstanding problem with /proc/cpuinfo -- it is showing a cached request value, not an actual value. The values in cpufreq are only slightly better...
Some day we may fix this, but probably only after some major surgery (or wholesale replacement) of cpufreq.
Signature · 3 lines
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=42924
Len Brown <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|RESOLVED |CLOSED
Signature · 3 lines
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.