USB: add devicetree helpers for determining dr_mode and phy_type
Subsystems (6)
Sascha Hauer
maintainerPATCH v3 1/1 USB: add devicetree helpers for determining dr_mode and phy_type
Here's another round of the dr_mode/phy_type patches. I think they should be ready for merging now. Greg, will you apply them should there be no problems anymore?
Sascha
changes since v2:
- fix adding of GPL Header was in wrong patch
- add missing hunk for new file of.c
changes since v1:
- move phy specific of helper to drivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- change usb_phy_dr_mode to usb_dr_mode
- change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTW
The following changes since commit 7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:
USB: chipidea: ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-for-next
for you to fetch changes up to b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:
USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-01-31 12:27:36 +0100)
----------------------------------------------------------------
USB Chipidea patches for v3.9
These add OF helpers for handling the dr_mode and phy_type property and makes use of them in the chipidea driver.
----------------------------------------------------------------
Michael Grzeschik (3):
USB: add devicetree helpers for determining dr_mode and phy_type
USB: chipidea: ci13xxx-imx: create dynamic platformdata
USB: chipidea: add PTW and PTS handling
Sascha Hauer (6):
USB: move bulk of otg/otg.c to phy/phy.c
USB chipidea: introduce dual role mode pdata flags USB chipidea i.MX: introduce dr_mode property
como fec wip
USB mxs-phy: Register phy with framework
USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
Documentation/devicetree/bindings/net/fsl-fec.txt | 20 + .../devicetree/bindings/usb/ci13xxx-imx.txt | 6 + drivers/net/ethernet/freescale/fec.c | 77 ++-- drivers/net/ethernet/freescale/fec.h | 1 + drivers/usb/chipidea/bits.h | 14 +- drivers/usb/chipidea/ci13xxx_imx.c | 60 ++- drivers/usb/chipidea/core.c | 60 ++- drivers/usb/otg/mxs-phy.c | 9 + drivers/usb/otg/otg.c | 423 ------------------- drivers/usb/phy/Makefile | 2 + drivers/usb/phy/of.c | 47 +++ drivers/usb/phy/phy.c | 434 ++++++++++++++++++++ drivers/usb/usb-common.c | 36 ++ include/linux/usb/chipidea.h | 3 +- include/linux/usb/of.h | 27 ++ include/linux/usb/otg.h | 7 + include/linux/usb/phy.h | 9 + 17 files changed, 742 insertions(+), 493 deletions(-) create mode 100644 drivers/usb/phy/of.c create mode 100644 drivers/usb/phy/phy.c create mode 100644 include/linux/usb/of.h
Sascha Hauer
maintainerPATCH 1/9 USB: move bulk of otg/otg.c to phy/phy.c
Most of otg/otg.c is not otg specific, but phy specific, so move it to the phy directory.
--- drivers/usb/otg/otg.c | 423 -------------------------------------------- drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy.c | 434 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 435 insertions(+), 423 deletions(-) create mode 100644 drivers/usb/phy/phy.c
drivers/usb/otg/otg.c +0 -423
@@ -8,432 +8,9 @@* the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - -#include <linux/kernel.h> #include <linux/export.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/usb/otg.h> -static LIST_HEAD (phy_list); -static LIST_HEAD (phy_bind_list); -static DEFINE_SPINLOCK (phy_lock); - -static struct usb_phy *__usb_find_phy (struct list_head *list, -enum usb_phy_type type) -{ -struct usb_phy *phy =NULL ; - -list_for_each_entry (phy, list, head) { -if (phy->type != type) -continue ; - -return phy; - } - -return ERR_PTR (-ENODEV ); -} - -static struct usb_phy *__usb_find_phy_dev (struct device *dev, -struct list_head *list,u8 index) -{ -struct usb_phy_bind *phy_bind =NULL ; - -list_for_each_entry (phy_bind, list, list) { -if (!(strcmp (phy_bind->dev_name,dev_name (dev))) && - phy_bind->index == index) { -if (phy_bind->phy) -return phy_bind->phy; -else -return ERR_PTR (-EPROBE_DEFER ); - } - } - -return ERR_PTR (-ENODEV ); -} - -static struct usb_phy *__of_usb_find_phy (struct device_node *node) -{ -struct usb_phy *phy; - -list_for_each_entry (phy, &phy_list, head) { -if (node != phy->dev->of_node) -continue ; - -return phy; - } - -return ERR_PTR (-ENODEV ); -} - -static void devm_usb_phy_release (struct device *dev,void *res) -{ -struct usb_phy *phy = *(struct usb_phy **)res; - -usb_put_phy (phy); -} - -static int devm_usb_phy_match (struct device *dev,void *res,void *match_data) -{ -return res == match_data; -} - -/** -* devm_usb_get_phy - find the USB PHY -* @dev - device that requests this phy -* @type - the type of the phy the controller requires -* -* Gets the phy using usb_get_phy(), and associates a device with it using -* devres. On driver detach, release function is invoked on the devres data, -* then, devres data is freed. -* -* For use by USB host and peripheral drivers. -*/ -struct usb_phy *devm_usb_get_phy (struct device *dev,enum usb_phy_type type) -{ -struct usb_phy **ptr, *phy; - - ptr =devres_alloc (devm_usb_phy_release,sizeof (*ptr),GFP_KERNEL ); -if (!ptr) -return NULL ; - - phy =usb_get_phy (type); -if (!IS_ERR (phy)) { - *ptr = phy; -devres_add (dev, ptr); - }else -devres_free (ptr); - -return phy; -} -EXPORT_SYMBOL (devm_usb_get_phy); - -/** -* usb_get_phy - find the USB PHY -* @type - the type of the phy the controller requires -* -* Returns the phy driver, after getting a refcount to it; or -* -ENODEV if there is no such phy. The caller is responsible for -* calling usb_put_phy() to release that count. -* -* For use by USB host and peripheral drivers. -*/ -struct usb_phy *usb_get_phy (enum usb_phy_type type) -{ -struct usb_phy *phy =NULL ; -unsigned long flags; - -spin_lock_irqsave (&phy_lock, flags); - - phy =__usb_find_phy (&phy_list, type); -if (IS_ERR (phy)) { -pr_err ("unable to find transceiver of type %s\n" , -usb_phy_type_string (type)); - goto err0; - } - -get_device (phy->dev); - -err0: -spin_unlock_irqrestore (&phy_lock, flags); - -return phy; -} -EXPORT_SYMBOL (usb_get_phy); - -/** -* devm_usb_get_phy_by_phandle - find the USB PHY by phandle -* @dev - device that requests this phy -* @phandle - name of the property holding the phy phandle value -* @index - the index of the phy -* -* Returns the phy driver associated with the given phandle value, -* after getting a refcount to it, -ENODEV if there is no such phy or -* -EPROBE_DEFER if there is a phandle to the phy, but the device is -* not yet loaded. While at that, it also associates the device with -* the phy using devres. On driver detach, release function is invoked -* on the devres data, then, devres data is freed. -* -* For use by USB host and peripheral drivers. -*/ -struct usb_phy *devm_usb_get_phy_by_phandle (struct device *dev, -const char *phandle,u8 index) -{ -struct usb_phy *phy =ERR_PTR (-ENOMEM ), **ptr; -unsigned long flags; -struct device_node *node; - -if (!dev->of_node) { -dev_dbg (dev,"device does not have a device node entry\n" ); -return ERR_PTR (-EINVAL ); - } - - node =of_parse_phandle (dev->of_node, phandle, index); -if (!node) { -dev_dbg (dev,"failed to get %s phandle in %s node\n" , phandle, - dev->of_node->full_name); -return ERR_PTR (-ENODEV ); - } - - ptr =devres_alloc (devm_usb_phy_release,sizeof (*ptr),GFP_KERNEL ); -if (!ptr) { -dev_dbg (dev,"failed to allocate memory for devres\n" ); - goto err0; - } - -spin_lock_irqsave (&phy_lock, flags); - - phy =__of_usb_find_phy (node); -if (IS_ERR (phy) || !try_module_get (phy->dev->driver->owner)) { - phy =ERR_PTR (-EPROBE_DEFER ); -devres_free (ptr); - goto err1; - } - - *ptr = phy; -devres_add (dev, ptr); - -get_device (phy->dev); - -err1: -spin_unlock_irqrestore (&phy_lock, flags); - -err0: -of_node_put (node); - -return phy; -} -EXPORT_SYMBOL (devm_usb_get_phy_by_phandle); - -/** -* usb_get_phy_dev - find the USB PHY -* @dev - device that requests this phy -* @index - the index of the phy -* -* Returns the phy driver, after getting a refcount to it; or -* -ENODEV if there is no such phy. The caller is responsible for -* calling usb_put_phy() to release that count. -* -* For use by USB host and peripheral drivers. -*/ -struct usb_phy *usb_get_phy_dev (struct device *dev,u8 index) -{ -struct usb_phy *phy =NULL ; -unsigned long flags; - -spin_lock_irqsave (&phy_lock, flags); - - phy =__usb_find_phy_dev (dev, &phy_bind_list, index); -if (IS_ERR (phy)) { -pr_err ("unable to find transceiver\n" ); - goto err0; - } - -get_device (phy->dev); - -err0: -spin_unlock_irqrestore (&phy_lock, flags); - -return phy; -} -EXPORT_SYMBOL (usb_get_phy_dev); - -/** -* devm_usb_get_phy_dev - find the USB PHY using device ptr and index -* @dev - device that requests this phy -* @index - the index of the phy -* -* Gets the phy using usb_get_phy_dev(), and associates a device with it using -* devres. On driver detach, release function is invoked on the devres data, -* then, devres data is freed. -* -* For use by USB host and peripheral drivers. -*/ -struct usb_phy *devm_usb_get_phy_dev (struct device *dev,u8 index) -{ -struct usb_phy **ptr, *phy; - - ptr =devres_alloc (devm_usb_phy_release,sizeof (*ptr),GFP_KERNEL ); -if (!ptr) -return NULL ; - - phy =usb_get_phy_dev (dev, index); -if (!IS_ERR (phy)) { - *ptr = phy; -devres_add (dev, ptr); - }else -devres_free (ptr); - -return phy; -} -EXPORT_SYMBOL (devm_usb_get_phy_dev); - -/** -* devm_usb_put_phy - release the USB PHY -* @dev - device that wants to release this phy -* @phy - the phy returned by devm_usb_get_phy() -* -* destroys the devres associated with this phy and invokes usb_put_phy -* to release the phy. -* -* For use by USB host and peripheral drivers. -*/ -void devm_usb_put_phy (struct device *dev,struct usb_phy *phy) -{ -int r; - - r =devres_destroy (dev, devm_usb_phy_release, devm_usb_phy_match, phy); -dev_WARN_ONCE (dev, r,"couldn't find PHY resource\n" ); -} -EXPORT_SYMBOL (devm_usb_put_phy); - -/** -* usb_put_phy - release the USB PHY -* @x: the phy returned by usb_get_phy() -* -* Releases a refcount the caller received from usb_get_phy(). -* -* For use by USB host and peripheral drivers. -*/ -void usb_put_phy (struct usb_phy *x) -{ -if (x) -put_device (x->dev); -} -EXPORT_SYMBOL (usb_put_phy); - -/** -* usb_add_phy - declare the USB PHY -* @x: the USB phy to be used; or NULL -* @type - the type of this PHY -* -* This call is exclusively for use by phy drivers, which -* coordinate the activities of drivers for host and peripheral -* controllers, and in some cases for VBUS current regulation. -*/ -int usb_add_phy (struct usb_phy *x,enum usb_phy_type type) -{ -int ret =0 ; -unsigned long flags; -struct usb_phy *phy; - -if (x->type !=USB_PHY_TYPE_UNDEFINED ) { -dev_err (x->dev,"not accepting initialized PHY %s\n" , x->label); -return -EINVAL ; - } - -spin_lock_irqsave (&phy_lock, flags); - -list_for_each_entry (phy, &phy_list, head) { -if (phy->type == type) { - ret = -EBUSY ; -dev_err (x->dev,"transceiver type %s already exists\n" , -usb_phy_type_string (type)); - goto out; - } - } - - x->type = type; -list_add_tail (&x->head, &phy_list); - -out: -spin_unlock_irqrestore (&phy_lock, flags); -return ret; -} -EXPORT_SYMBOL (usb_add_phy); - -/** -* usb_add_phy_dev - declare the USB PHY -* @x: the USB phy to be used; or NULL -* -* This call is exclusively for use by phy drivers, which -* coordinate the activities of drivers for host and peripheral -* controllers, and in some cases for VBUS current regulation. -*/ -int usb_add_phy_dev (struct usb_phy *x) -{ -struct usb_phy_bind *phy_bind; -unsigned long flags; - -if (!x->dev) { -dev_err (x->dev,"no device provided for PHY\n" ); -return -EINVAL ; - } - -spin_lock_irqsave (&phy_lock, flags); -list_for_each_entry (phy_bind, &phy_bind_list, list) -if (!(strcmp (phy_bind->phy_dev_name,dev_name (x->dev)))) - phy_bind->phy = x; - -list_add_tail (&x->head, &phy_list); - -spin_unlock_irqrestore (&phy_lock, flags); -return 0 ; -} -EXPORT_SYMBOL (usb_add_phy_dev); - -/** -* usb_remove_phy - remove the OTG PHY -* @x: the USB OTG PHY to be removed; -* -* This reverts the effects of usb_add_phy -*/ -void usb_remove_phy (struct usb_phy *x) -{ -unsigned long flags; -struct usb_phy_bind *phy_bind; - -spin_lock_irqsave (&phy_lock, flags); -if (x) { -list_for_each_entry (phy_bind, &phy_bind_list, list) -if (phy_bind->phy == x) - phy_bind->phy =NULL ; -list_del (&x->head); - } -spin_unlock_irqrestore (&phy_lock, flags); -} -EXPORT_SYMBOL (usb_remove_phy); - -/** -* usb_bind_phy - bind the phy and the controller that uses the phy -* @dev_name: the device name of the device that will bind to the phy -* @index: index to specify the port number -* @phy_dev_name: the device name of the phy -* -* Fills the phy_bind structure with the dev_name and phy_dev_name. This will -* be used when the phy driver registers the phy and when the controller -* requests this phy. -* -* To be used by platform specific initialization code. -*/ -int __init usb_bind_phy (const char *dev_name,u8 index, -const char *phy_dev_name) -{ -struct usb_phy_bind *phy_bind; -unsigned long flags; - - phy_bind =kzalloc (sizeof (*phy_bind),GFP_KERNEL ); -if (!phy_bind) { -pr_err ("phy_bind(): No memory for phy_bind" ); -return -ENOMEM ; - } - - phy_bind->dev_name = dev_name; - phy_bind->phy_dev_name = phy_dev_name; - phy_bind->index = index; - -spin_lock_irqsave (&phy_lock, flags); -list_add_tail (&phy_bind->list, &phy_bind_list); -spin_unlock_irqrestore (&phy_lock, flags); - -return 0 ; -} -EXPORT_SYMBOL_GPL (usb_bind_phy); -const char *otg_state_string (enum usb_otg_state state) {switch (state) {
drivers/usb/phy/Makefile +1 -0
@@ -4,6 +4,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +obj-$(CONFIG_USB_OTG_UTILS) += phy.o obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_OMAP_USB3) += omap-usb3.o obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
drivers/usb/phy/phy.c new file +434 -0
434 lines not on this page · raw message
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 2/9 USB: add devicetree helpers for determining dr_mode and phy_type
In reply to Sascha HauerFrom: Michael Grzeschik <[email protected]>
This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from the devicetree.
--- drivers/usb/phy/Makefile | 1 + drivers/usb/phy/of.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/usb-common.c | 36 +++++++++++++++++++++++++++++++++++ include/linux/usb/of.h | 27 ++++++++++++++++++++++++++ include/linux/usb/otg.h | 7 +++++++ include/linux/usb/phy.h | 9 +++++++++ 6 files changed, 127 insertions(+) create mode 100644 drivers/usb/phy/of.c create mode 100644 include/linux/usb/of.h
drivers/usb/phy/Makefile +1 -0
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG obj-$(CONFIG_USB_OTG_UTILS) += phy.o +obj-$(CONFIG_OF) += of.o obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_OMAP_USB3) += omap-usb3.o obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
drivers/usb/phy/of.c new file +47 -0
47 lines not on this page · raw message
drivers/usb/usb-common.c +36 -0
@@ -14,6 +14,9 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/usb/ch9.h> +#include <linux/of.h> +#include <linux/usb/of.h> +#include <linux/usb/otg.h> const char *usb_speed_string (enum usb_device_speed speed) {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed) }EXPORT_SYMBOL_GPL (usb_speed_string); +#ifdef CONFIG_OF +static const char *usb_dr_modes[] = { + [USB_DR_MODE_UNKNOWN ] ="" , + [USB_DR_MODE_HOST ] ="host" , + [USB_DR_MODE_PERIPHERAL ] ="peripheral" , + [USB_DR_MODE_OTG ] ="otg" , +}; + +/** +* of_usb_get_dr_mode - Get dual role mode for given device_node +* @np: Pointer to the given device_node +* +* The function gets phy interface string from property 'dr_mode', +* and returns the correspondig enum usb_dr_mode +*/ +enum usb_dr_mode of_usb_get_dr_mode (struct device_node *np) +{ +const char *dr_mode; +int err, i; + + err =of_property_read_string (np,"dr_mode" , &dr_mode); +if (err <0 ) +return USB_DR_MODE_UNKNOWN ; + +for (i =0 ; i <ARRAY_SIZE (usb_dr_modes); i++) +if (!strcmp (dr_mode, usb_dr_modes[i])) +return i; + +return USB_DR_MODE_UNKNOWN ; +} +EXPORT_SYMBOL_GPL (of_usb_get_dr_mode); +#endif +MODULE_LICENSE ("GPL" );
include/linux/usb/of.h new file +27 -0
@@ -0,0 +1,27 @@ +/* +* OF helpers for usb devices. +* +* This file is released under the GPLv2 +*/ + +#ifndef __LINUX_USB_OF_H +#define __LINUX_USB_OF_H + +#include <linux/usb/phy.h> + +#ifdef CONFIG_OF +enum usb_phy_interface of_usb_get_phy_mode (struct device_node *np); +enum usb_dr_mode of_usb_get_dr_mode (struct device_node *np); +#else +static inline enum usb_phy_interface of_usb_get_phy_mode (struct device_node *np) +{ +return USBPHY_INTERFACE_MODE_UNKNOWN ; +} + +static inline enum usb_dr_mode of_usb_get_dr_mode (struct device_node *np) +{ +return USB_DR_MODE_UNKNOWN ; +} +#endif + +#endif /* __LINUX_USB_OF_H */
include/linux/usb/otg.h +7 -0
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)/* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum (struct usb_bus *bus,unsigned port_num); +enum usb_dr_mode { +USB_DR_MODE_UNKNOWN , +USB_DR_MODE_HOST , +USB_DR_MODE_PERIPHERAL , +USB_DR_MODE_OTG , +}; +#endif /* __LINUX_USB_OTG_H */
include/linux/usb/phy.h +9 -0
@@ -12,6 +12,15 @@#include <linux/notifier.h> #include <linux/usb.h> +enum usb_phy_interface { +USBPHY_INTERFACE_MODE_UNKNOWN , +USBPHY_INTERFACE_MODE_UTMI , +USBPHY_INTERFACE_MODE_UTMIW , +USBPHY_INTERFACE_MODE_ULPI , +USBPHY_INTERFACE_MODE_SERIAL , +USBPHY_INTERFACE_MODE_HSIC , +}; +enum usb_phy_events {USB_EVENT_NONE ,/* no events or cable disconnected */ USB_EVENT_VBUS ,/* vbus valid event */
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 3/9 USB: chipidea: ci13xxx-imx: create dynamic platformdata
In reply to Sascha HauerFrom: Michael Grzeschik <[email protected]>
This patch removes the limitation of having only one instance of the ci13xxx-imx platformdata and makes different configurations possible.
--- drivers/usb/chipidea/ci13xxx_imx.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/usb/chipidea/ci13xxx_imx.c +15 -10
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);/* End of common functions shared by usbmisc drivers*/ -static struct ci13xxx_platform_data ci13xxx_imx_platdata = { - .name ="ci13xxx_imx" , - .flags =CI13XXX_REQUIRE_TRANSCEIVER | -CI13XXX_PULLUP_ON_VBUS | -CI13XXX_DISABLE_STREAMING , - .capoffset =DEF_CAPOFFSET , -}; -static int ci13xxx_imx_probe (struct platform_device *pdev) {struct ci13xxx_imx_data *data; +struct ci13xxx_platform_data *pdata;struct platform_device *plat_ci, *phy_pdev;struct device_node *phy_np;struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) && !usbmisc_ops)return -EPROBE_DEFER ; + pdata =devm_kzalloc (&pdev->dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) { +dev_err (&pdev->dev,"Failed to allocate CI13xxx-IMX pdata!\n" ); +return -ENOMEM ; + } + + pdata->name ="ci13xxx_imx" ; + pdata->capoffset =DEF_CAPOFFSET ; + pdata->flags =CI13XXX_REQUIRE_TRANSCEIVER | +CI13XXX_PULLUP_ON_VBUS | +CI13XXX_DISABLE_STREAMING ; + data =devm_kzalloc (&pdev->dev,sizeof (*data),GFP_KERNEL );if (!data) {dev_err (&pdev->dev,"Failed to allocate CI13xxx-IMX data!\n" );
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) reg_vbus =NULL ; } - ci13xxx_imx_platdata.phy = data->phy; + pdata->phy = data->phy;if (!pdev->dev.dma_mask) { pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) plat_ci =ci13xxx_add_device (&pdev->dev, pdev->resource, pdev->num_resources, - &ci13xxx_imx_platdata); + pdata);if (IS_ERR (plat_ci)) { ret =PTR_ERR (plat_ci); dev_err(&pdev->dev,
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 4/9 USB: chipidea: add PTW and PTS handling
In reply to Sascha HauerFrom: Michael Grzeschik <[email protected]>
This patch makes it possible to configure the PTW and PTS bits inside the portsc register for host and device mode before the driver starts and the phy can be addressed as hardware implementation is designed.
--- .../devicetree/bindings/usb/ci13xxx-imx.txt | 5 +++ drivers/usb/chipidea/bits.h | 14 ++++++- drivers/usb/chipidea/ci13xxx_imx.c | 3 ++ drivers/usb/chipidea/core.c | 39 ++++++++++++++++++++ include/linux/usb/chipidea.h | 1 + 5 files changed, 61 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +5 -0
@@ -5,6 +5,11 @@ Required properties: - reg: Should contain registers location and length - interrupts: Should contain controller interrupt +Recommended properies: +- phy_type: the type of the phy connected to the core. Should be one + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this + property the PORTSC register won't be touched + Optional properties: - fsl,usbphy: phandler of usb phy that connects to the only one port - fsl,usbmisc: phandler of non-core register device, with one argument
drivers/usb/chipidea/bits.h +13 -1
@@ -48,10 +48,22 @@#define PORTSC_SUSP BIT(7)#define PORTSC_HSP BIT(9)#define PORTSC_PTC (0x0FUL << 16) +/* PTS and PTW for non lpm version only */ +#define PORTSC_PTS (d) ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0)) +#define PORTSC_PTW BIT(28)/* DEVLC */ #define DEVLC_PSPD (0x03UL << 25) -#define DEVLC_PSPD_HS (0x02UL << 25) +#define DEVLC_PSPD_HS (0x02UL << 25) +#define DEVLC_PTW BIT(27) +#define DEVLC_STS BIT(28) +#define DEVLC_PTS (d) (((d) & 0x7) << 29) + +/* Encoding for DEVLC_PTS and PORTSC_PTS */ +#define PTS_UTMI 0 +#define PTS_ULPI 2 +#define PTS_SERIAL 3 +#define PTS_HSIC 4/* OTGSC */ #define OTGSC_IDPU BIT(5)
drivers/usb/chipidea/ci13xxx_imx.c +3 -0
@@ -21,6 +21,7 @@#include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/pinctrl/consumer.h> +#include <linux/usb/of.h> #include "ci.h" #include "ci13xxx_imx.h"
@@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)CI13XXX_PULLUP_ON_VBUS |CI13XXX_DISABLE_STREAMING ; + pdata->phy_mode =of_usb_get_phy_mode (pdev->dev.of_node); + data =devm_kzalloc (&pdev->dev,sizeof (*data),GFP_KERNEL );if (!data) {dev_err (&pdev->dev,"Failed to allocate CI13xxx-IMX data!\n" );
drivers/usb/chipidea/core.c +39 -0
@@ -67,6 +67,8 @@#include <linux/usb/gadget.h> #include <linux/usb/otg.h> #include <linux/usb/chipidea.h> +#include <linux/usb/of.h> +#include <linux/phy.h> #include "ci.h" #include "udc.h"
@@ -211,6 +213,41 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)return 0 ; } +static void hw_phymode_configure (struct ci13xxx *ci) +{ +u32 portsc, lpm; + +switch (ci->platdata->phy_mode) { +case USBPHY_INTERFACE_MODE_UTMI : + portsc =PORTSC_PTS (PTS_UTMI ); + lpm =DEVLC_PTS (PTS_UTMI ); +break ; +case USBPHY_INTERFACE_MODE_UTMIW : + portsc =PORTSC_PTS (PTS_UTMI ) |PORTSC_PTW ; + lpm =DEVLC_PTS (PTS_UTMI ) |DEVLC_PTW ; +break ; +case USBPHY_INTERFACE_MODE_ULPI : + portsc =PORTSC_PTS (PTS_ULPI ); + lpm =DEVLC_PTS (PTS_ULPI ); +break ; +case USBPHY_INTERFACE_MODE_SERIAL : + portsc =PORTSC_PTS (PTS_SERIAL ); + lpm =DEVLC_PTS (PTS_SERIAL ); +break ; +case USBPHY_INTERFACE_MODE_HSIC : + portsc =PORTSC_PTS (PTS_HSIC ); + lpm =DEVLC_PTS (PTS_HSIC ); +break ; +default : +return ; + } + +if (ci->hw_bank.lpm) +hw_write (ci,OP_PORTSC ,DEVLC_PTS (7 ) |DEVLC_PTW , lpm); +else +hw_write (ci,OP_PORTSC ,PORTSC_PTS (7 ) |PORTSC_PTW , portsc); +} +/** * hw_device_reset: resets chip (execute without interruption) * @ci: the controller
@@ -476,6 +513,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) : CI_ROLE_GADGET; } +hw_phymode_configure (ci); + ret =ci_role_start (ci, ci->role);if (ret) {dev_err (dev,"can't start %s role\n" ,ci_role (ci)->name);
include/linux/usb/chipidea.h +1 -0
@@ -14,6 +14,7 @@ struct ci13xxx_platform_data {uintptr_t capoffset;unsigned power_budget;struct usb_phy *phy; +enum usb_phy_interface phy_mode;unsigned long flags;#define CI13XXX_REGS_SHARED BIT(0)#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 5/9 USB chipidea: introduce dual role mode pdata flags
In reply to Sascha HauerEven if a chipidea core is otg capable the board may not. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour.
--- drivers/usb/chipidea/core.c | 21 +++++++++++++++------ include/linux/usb/chipidea.h | 2 +- 2 files changed, 16 insertions(+), 7 deletions(-)
drivers/usb/chipidea/core.c +15 -6
@@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)struct resource *res;void __iomem *base;int ret; +int dr_mode;if (!dev->platform_data) {dev_err (dev,"platform data missing\n" );
@@ -487,14 +488,22 @@ static int ci_hdrc_probe(struct platform_device *pdev)return -ENODEV ; } + dr_mode = ci->platdata->dr_mode; +if (dr_mode ==USB_DR_MODE_UNKNOWN ) + dr_mode =USB_DR_MODE_OTG ; +/* initialize role(s) before the interrupt is requested */ - ret =ci_hdrc_host_init (ci); -if (ret) -dev_info (dev,"doesn't support host\n" ); +if (dr_mode ==USB_DR_MODE_OTG || dr_mode ==USB_DR_MODE_HOST ) { + ret =ci_hdrc_host_init (ci); +if (ret) +dev_info (dev,"doesn't support host\n" ); + } - ret =ci_hdrc_gadget_init (ci); -if (ret) -dev_info (dev,"doesn't support gadget\n" ); +if (dr_mode ==USB_DR_MODE_OTG || dr_mode ==USB_DR_MODE_PERIPHERAL ) { + ret =ci_hdrc_gadget_init (ci); +if (ret) +dev_info (dev,"doesn't support gadget\n" ); + }if (!ci->roles[CI_ROLE_HOST ] && !ci->roles[CI_ROLE_GADGET ]) {dev_err (dev,"no supported roles\n" );
include/linux/usb/chipidea.h +1 -1
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)#define CI13XXX_PULLUP_ON_VBUS BIT(2)#define CI13XXX_DISABLE_STREAMING BIT(3) - +enum usb_dr_mode dr_mode;#define CI13XXX_CONTROLLER_RESET_EVENT 0#define CI13XXX_CONTROLLER_STOPPED_EVENT 1void (*notify_event) (struct ci13xxx *ci,unsigned event);
Signature · 1 line
1.7.10.4
PATCH 5/9 USB chipidea: introduce dual role mode pdata flags
Quoted 15 lines · Sascha Hauer
Even if a chipidea core is otg capable the board may not. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour.
Signed-off-by Sascha Hauer <[email protected]>--- drivers/usb/chipidea/core.c | 21 +++++++++++++++------ include/linux/usb/chipidea.h | 2 +- 2 files changed, 16 insertions(+), 7 deletions(-)drivers/usb/chipidea/core.c +0
-0
drivers/usb/chipidea/core.c static int ci_hdrc_probe(struct platform_device *pdev) · line 438
Quoted 4 lines
drivers/usb/chipidea/core.c +1
-0@@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)struct resource *res;void __iomem *base;int ret; +int dr_mode;
why not using enum usb_dr_mode;
Signature · 2 lines
Best Regards, Peter Chen
Sascha Hauer
maintainerPATCH 6/9 USB chipidea i.MX: introduce dr_mode property
In reply to Sascha HauerThe dr_mode devicetree property allows to explicitly specify the host/peripheral/otg mode. This is necessary for boards without proper ID pin handling.
--- Documentation/devicetree/bindings/usb/ci13xxx-imx.txt | 1 + drivers/usb/chipidea/ci13xxx_imx.c | 1 + 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +1 -0
@@ -9,6 +9,7 @@ Recommended properies: - phy_type: the type of the phy connected to the core. Should be one of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this property the PORTSC register won't be touched +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" Optional properties: - fsl,usbphy: phandler of usb phy that connects to the only one port
drivers/usb/chipidea/ci13xxx_imx.c +1 -0
@@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)CI13XXX_DISABLE_STREAMING ; pdata->phy_mode =of_usb_get_phy_mode (pdev->dev.of_node); + pdata->dr_mode =of_usb_get_dr_mode (pdev->dev.of_node); data =devm_kzalloc (&pdev->dev,sizeof (*data),GFP_KERNEL );if (!data) {
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 7/9 como fec wip
In reply to Sascha Hauer--- Documentation/devicetree/bindings/net/fsl-fec.txt | 20 ++++++ drivers/net/ethernet/freescale/fec.c | 77 ++++++++++++--------- drivers/net/ethernet/freescale/fec.h | 1 + 3 files changed, 67 insertions(+), 31 deletions(-)
Documentation/devicetree/bindings/net/fsl-fec.txt +20 -0
@@ -15,6 +15,9 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy : a phandle for the PHY device used for the fec. Used to specify an + external phy or to specify a particular address if the mdio bus has multiple + phys on it. Example:
@@ -26,3 +29,20 @@ ethernet at 83fec000 { phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; }; + +Example with specific phy address: + +ethernet at 83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + local-mac-address = [00 04 9F 01 1B B9]; + phy = &phy3; + + phy3: ethernet-phy at 3 { + reg = <3>; + device_type = "ethernet-phy"; + }; +};
drivers/net/ethernet/freescale/fec.c +46 -31
124 lines not on this page · raw message
drivers/net/ethernet/freescale/fec.h +1 -0
@@ -236,6 +236,7 @@ struct fec_enet_private {/* Phylib and MDIO interface */ struct mii_bus *mii_bus;struct phy_device *phy_dev; +struct device_node *phy_node;int mii_timeout;uint phy_speed;phy_interface_t phy_interface;
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 8/9 USB mxs-phy: Register phy with framework
In reply to Sascha HauerWe now have usb_add_phy_dev(), so use it to register with the framework to be able to find the phy from the USB driver.
--- drivers/usb/otg/mxs-phy.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/usb/otg/mxs-phy.c +9 -0
@@ -127,6 +127,7 @@ static int mxs_phy_probe(struct platform_device *pdev)void __iomem *base;struct clk *clk;struct mxs_phy *mxs_phy; +int ret; res =platform_get_resource (pdev,IORESOURCE_MEM ,0 );if (!res) {
@@ -166,11 +167,19 @@ static int mxs_phy_probe(struct platform_device *pdev)platform_set_drvdata (pdev, &mxs_phy->phy); + ret =usb_add_phy_dev (&mxs_phy->phy); +if (ret) +return ret; +return 0 ; }static int mxs_phy_remove (struct platform_device *pdev) { +struct mxs_phy *mxs_phy =platform_get_drvdata (pdev); + +usb_remove_phy (&mxs_phy->phy); +platform_set_drvdata (pdev,NULL );return 0 ;
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH 9/9 USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
In reply to Sascha Hauer--- drivers/usb/chipidea/ci13xxx_imx.c | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-)
drivers/usb/chipidea/ci13xxx_imx.c +10 -21
@@ -30,7 +30,6 @@ ((struct usb_phy *)platform_get_drvdata(pdev))struct ci13xxx_imx_data { -struct device_node *phy_np;struct usb_phy *phy;struct platform_device *ci_pdev;struct clk *clk;
@@ -90,12 +89,12 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) {struct ci13xxx_imx_data *data;struct ci13xxx_platform_data *pdata; -struct platform_device *plat_ci, *phy_pdev; -struct device_node *phy_np; +struct platform_device *plat_ci;struct resource *res;struct regulator *reg_vbus;struct pinctrl *pinctrl;int ret; +struct usb_phy *phy;if (of_find_property (pdev->dev.of_node,"fsl,usbmisc" ,NULL ) && !usbmisc_ops)
@@ -147,18 +146,12 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)return ret; } - phy_np =of_parse_phandle (pdev->dev.of_node,"fsl,usbphy" ,0 ); -if (phy_np) { - data->phy_np = phy_np; - phy_pdev =of_find_device_by_node (phy_np); -if (phy_pdev) { -struct usb_phy *phy; - phy =pdev_to_phy (phy_pdev); -if (phy && -try_module_get (phy_pdev->dev.driver->owner)) { -usb_phy_init (phy); - data->phy = phy; - } + phy =devm_usb_get_phy_by_phandle (&pdev->dev,"fsl,usbphy" ,0 ); +if (!IS_ERR (phy)) { + ret =usb_phy_init (phy); +if (ret) { +dev_err (&pdev->dev,"unable to init phy: %d\n" , ret); + goto err_clk; } }
@@ -170,7 +163,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)dev_err (&pdev->dev,"Failed to enable vbus regulator, err=%d\n" , ret); - goto put_np; + goto err_clk; } data->reg_vbus = reg_vbus; }else {
@@ -222,9 +215,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) err:if (reg_vbus)regulator_disable (reg_vbus); -put_np: -if (phy_np) -of_node_put (phy_np); +err_clk:clk_disable_unprepare (data->clk);return ret; }
@@ -244,8 +235,6 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)module_put (data->phy->dev->driver->owner); } -of_node_put (data->phy_np); -clk_disable_unprepare (data->clk);platform_set_drvdata (pdev,NULL );
Signature · 1 line
1.7.10.4
Sascha Hauer
maintainerPATCH v3 1/1 USB: add devicetree helpers for determining dr_mode and phy_type
In reply to Sascha HauerQuoted 3 lines · Sascha Hauer
Here's another round of the dr_mode/phy_type patches. I think they should be ready for merging now. Greg, will you apply them should there be no problems anymore?
Please ignore, the linux-usb address is wrong, I just resent these.
Sascha
Quoted 72 lines
Sascha
changes since v2:
- fix adding of GPL Header was in wrong patch
- add missing hunk for new fileof.cchanges since v1:
- move phy specific of helper todrivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- changeusb_phy_dr_modetousb_dr_mode
- changeUSBPHY_INTERFACE_MODE_NAtoUSBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTWThe following changes since commit
7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:USB: chipidea:
ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.gittags/usb-chipidea-for-nextfor you to fetch changes up to
b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:USB chipidea i.MX: use
devm_usb_get_phy_by_phandleto get phy (2013-01-31 12:27:36 +0100)----------------------------------------------------------------
USB Chipidea patches for v3.9These add OF helpers for handling the
dr_modeandphy_typeproperty and makes use of them in the chipidea driver.----------------------------------------------------------------
Michael Grzeschik (3):
USB: add devicetree helpers for determiningdr_modeandphy_type
USB: chipidea: ci13xxx-imx: create dynamic platformdata
USB: chipidea: add PTW and PTS handlingSascha Hauer (6):
USB: move bulk ofotg/otg.ctophy/phy.c
USB chipidea: introduce dual role mode pdata flags USB chipidea i.MX: introducedr_modeproperty
como fec wip
USB mxs-phy: Register phy with framework
USB chipidea i.MX: usedevm_usb_get_phy_by_phandleto get phyDocumentation/devicetree/bindings/net/fsl-fec.txt | 20 + .../devicetree/bindings/usb/ci13xxx-imx.txt | 6 + drivers/net/ethernet/freescale/fec.c | 77 ++-- drivers/net/ethernet/freescale/fec.h | 1 + drivers/usb/chipidea/bits.h | 14 +- drivers/usb/chipidea/ci13xxx_imx.c | 60 ++- drivers/usb/chipidea/core.c | 60 ++- drivers/usb/otg/mxs-phy.c | 9 + drivers/usb/otg/otg.c | 423 ------------------- drivers/usb/phy/Makefile | 2 + drivers/usb/phy/of.c | 47 +++ drivers/usb/phy/phy.c | 434 ++++++++++++++++++++ drivers/usb/usb-common.c | 36 ++ include/linux/usb/chipidea.h | 3 +- include/linux/usb/of.h | 27 ++ include/linux/usb/otg.h | 7 + include/linux/usb/phy.h | 9 + 17 files changed, 742 insertions(+), 493 deletions(-) create mode 100644 drivers/usb/phy/of.c create mode 100644 drivers/usb/phy/phy.c create mode 100644 include/linux/usb/of.h
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |