Get rid of R_ARM_ABS32 relocation records
Subsystems (9)
cover Get rid of R_ARM_ABS32 relocation records
R_ARM_ABS32 relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand, R_ARM_RELATIVE records make references correct before as well as after relocation.
This patch series aims at removing all R_ARM_ABS32 relocations from ARM targets.
the main contributor of R_ARM_ABS32 relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate as R_ARM_ABS32 even though they are supposed *not* to be absolute.
V1 of this patch 'series' fixes LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using R_ARM_RELATIVE.
This V1 is provided for all to test and make sure that no ill-effect arises from LGA changes; V2 will integrate any feedback on LGAs and also remove any remaining R_ARM_ABS32 relocations.
Albert ARIBAUD (1):
Refactor linker-generated arrays
Makefile | 6 +- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 2 +- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 2 +- arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +- arch/arm/cpu/ixp/u-boot.lds | 2 +- arch/arm/cpu/u-boot.lds | 2 +- arch/avr32/cpu/u-boot.lds | 2 +- arch/blackfin/cpu/u-boot.lds | 2 +- arch/microblaze/cpu/u-boot.lds | 2 +- arch/mips/cpu/u-boot.lds | 2 +- arch/nds32/cpu/n1213/u-boot.lds | 2 +- arch/nios2/cpu/u-boot.lds | 2 +- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +- arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +- arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +- arch/sandbox/cpu/u-boot.lds | 2 +- arch/sh/cpu/sh2/u-boot.lds | 2 +- arch/sh/cpu/sh3/u-boot.lds | 2 +- arch/sh/cpu/sh4/u-boot.lds | 2 +- arch/x86/cpu/u-boot.lds | 2 +- board/BuS/eb_cpu5282/u-boot.lds | 2 +- board/LEOX/elpt860/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds | 2 +- board/RPXlite/u-boot.lds | 2 +- board/RPXlite_dw/u-boot.lds | 2 +- board/RRvision/u-boot.lds | 2 +- board/actux1/u-boot.lds | 2 +- board/actux2/u-boot.lds | 2 +- board/actux3/u-boot.lds | 2 +- board/adder/u-boot.lds | 2 +- board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +- board/altera/nios2-generic/u-boot.lds | 2 +- board/amcc/acadia/u-boot-nand.lds | 2 +- board/amcc/bamboo/u-boot-nand.lds | 2 +- board/amcc/canyonlands/u-boot-nand.lds | 2 +- board/amcc/kilauea/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-ram.lds | 2 +- board/astro/mcf5373l/u-boot.lds | 2 +- board/cobra5272/u-boot.lds | 2 +- board/cogent/u-boot.lds | 2 +- board/dave/PPChameleonEVB/u-boot.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 2 +- board/dvlhost/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds | 2 +- board/emk/top860/u-boot.lds | 2 +- board/ep88x/u-boot.lds | 2 +- board/esd/dasa_sim/u-boot.lds | 2 +- board/esd/pmc440/u-boot-nand.lds | 2 +- board/esd/tasreg/u-boot.lds | 2 +- board/esteem192e/u-boot.lds | 2 +- board/evb64260/u-boot.lds | 2 +- board/fads/u-boot.lds | 2 +- board/flagadm/u-boot.lds | 2 +- board/freescale/m5208evbe/u-boot.lds | 2 +- board/freescale/m52277evb/u-boot.lds | 2 +- board/freescale/m5235evb/u-boot.lds | 2 +- board/freescale/m5249evb/u-boot.lds | 2 +- board/freescale/m5253demo/u-boot.lds | 2 +- board/freescale/m5253evbe/u-boot.lds | 2 +- board/freescale/m5271evb/u-boot.lds | 2 +- board/freescale/m5272c3/u-boot.lds | 2 +- board/freescale/m5275evb/u-boot.lds | 2 +- board/freescale/m5282evb/u-boot.lds | 2 +- board/freescale/m53017evb/u-boot.lds | 2 +- board/freescale/m5329evb/u-boot.lds | 2 +- board/freescale/m5373evb/u-boot.lds | 2 +- board/freescale/m54418twr/u-boot.lds | 2 +- board/freescale/m54451evb/u-boot.lds | 2 +- board/freescale/m54455evb/u-boot.lds | 2 +- board/freescale/m547xevb/u-boot.lds | 2 +- board/freescale/m548xevb/u-boot.lds | 2 +- board/freescale/mx31ads/u-boot.lds | 2 +- board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +- board/gaisler/gr_ep2s60/u-boot.lds | 2 +- board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +- board/gaisler/grsim/u-boot.lds | 2 +- board/gaisler/grsim_leon2/u-boot.lds | 2 +- board/gen860t/u-boot-flashenv.lds | 2 +- board/gen860t/u-boot.lds | 2 +- board/genietv/u-boot.lds | 2 +- board/hermes/u-boot.lds | 2 +- board/hymod/u-boot.lds | 2 +- board/icu862/u-boot.lds | 2 +- board/idmr/u-boot.lds | 2 +- board/ip860/u-boot.lds | 2 +- board/ivm/u-boot.lds | 2 +- board/korat/u-boot-F7FC.lds | 2 +- board/kup/kup4k/u-boot.lds | 2 +- board/kup/kup4x/u-boot.lds | 2 +- board/lwmon/u-boot.lds | 2 +- board/manroland/uc100/u-boot.lds | 2 +- board/matrix_vision/mvsmr/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds | 2 +- board/mousse/u-boot.lds | 2 +- board/mvblue/u-boot.lds | 2 +- board/netphone/u-boot.lds | 2 +- board/netta/u-boot.lds | 2 +- board/netta2/u-boot.lds | 2 +- board/netvia/u-boot.lds | 2 +- board/nx823/u-boot.lds | 2 +- board/openrisc/openrisc-generic/u-boot.lds | 2 +- board/quantum/u-boot.lds | 2 +- board/r360mpi/u-boot.lds | 2 +- board/rbc823/u-boot.lds | 2 +- board/renesas/sh7757lcr/u-boot.lds | 2 +- board/rsdproto/u-boot.lds | 2 +- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 2 +- board/samsung/smdk6400/u-boot-nand.lds | 2 +- board/sandpoint/u-boot.lds | 2 +- board/sixnet/u-boot.lds | 2 +- board/snmc/qs850/u-boot.lds | 2 +- board/snmc/qs860t/u-boot.lds | 2 +- board/spc1920/u-boot.lds | 2 +- board/spd8xx/u-boot.lds | 2 +- board/stx/stxxtc/u-boot.lds | 2 +- board/svm_sc8xx/u-boot.lds | 2 +- board/tqc/tqm8xx/u-boot.lds | 2 +- board/v37/u-boot.lds | 2 +- board/vpac270/u-boot-spl.lds | 2 +- common/cmd_help.c | 2 +- common/command.c | 1 + config.mk | 2 - helper.mk | 64 ------ include/command.h | 2 +- include/env_callback.h | 2 +- include/linker_lists.h | 244 +++++++++++++++++----- nand_spl/board/freescale/mpc8536ds/Makefile | 6 +- nand_spl/board/freescale/mpc8569mds/Makefile | 6 +- nand_spl/board/freescale/mpc8572ds/Makefile | 6 +- nand_spl/board/freescale/mx31pdk/Makefile | 6 +- nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +- nand_spl/board/freescale/p1010rdb/Makefile | 6 +- nand_spl/board/freescale/p1023rds/Makefile | 6 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 6 +- nand_spl/board/karo/tx25/Makefile | 6 +- nand_spl/board/karo/tx25/u-boot.lds | 2 +- nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +- spl/Makefile | 6 +- 152 files changed, 342 insertions(+), 305 deletions(-) delete mode 100644 helper.mk
Signature · 1 line
1.7.10.4
PATCH 1/1 Refactor linker-generated arrays
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
--- Makefile | 6 +- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 2 +- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 2 +- arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +- arch/arm/cpu/ixp/u-boot.lds | 2 +- arch/arm/cpu/u-boot.lds | 2 +- arch/avr32/cpu/u-boot.lds | 2 +- arch/blackfin/cpu/u-boot.lds | 2 +- arch/microblaze/cpu/u-boot.lds | 2 +- arch/mips/cpu/u-boot.lds | 2 +- arch/nds32/cpu/n1213/u-boot.lds | 2 +- arch/nios2/cpu/u-boot.lds | 2 +- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +- arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +- arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +- arch/sandbox/cpu/u-boot.lds | 2 +- arch/sh/cpu/sh2/u-boot.lds | 2 +- arch/sh/cpu/sh3/u-boot.lds | 2 +- arch/sh/cpu/sh4/u-boot.lds | 2 +- arch/x86/cpu/u-boot.lds | 2 +- board/BuS/eb_cpu5282/u-boot.lds | 2 +- board/LEOX/elpt860/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds | 2 +- board/RPXlite/u-boot.lds | 2 +- board/RPXlite_dw/u-boot.lds | 2 +- board/RRvision/u-boot.lds | 2 +- board/actux1/u-boot.lds | 2 +- board/actux2/u-boot.lds | 2 +- board/actux3/u-boot.lds | 2 +- board/adder/u-boot.lds | 2 +- board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +- board/altera/nios2-generic/u-boot.lds | 2 +- board/amcc/acadia/u-boot-nand.lds | 2 +- board/amcc/bamboo/u-boot-nand.lds | 2 +- board/amcc/canyonlands/u-boot-nand.lds | 2 +- board/amcc/kilauea/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-ram.lds | 2 +- board/astro/mcf5373l/u-boot.lds | 2 +- board/cobra5272/u-boot.lds | 2 +- board/cogent/u-boot.lds | 2 +- board/dave/PPChameleonEVB/u-boot.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 2 +- board/dvlhost/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds | 2 +- board/emk/top860/u-boot.lds | 2 +- board/ep88x/u-boot.lds | 2 +- board/esd/dasa_sim/u-boot.lds | 2 +- board/esd/pmc440/u-boot-nand.lds | 2 +- board/esd/tasreg/u-boot.lds | 2 +- board/esteem192e/u-boot.lds | 2 +- board/evb64260/u-boot.lds | 2 +- board/fads/u-boot.lds | 2 +- board/flagadm/u-boot.lds | 2 +- board/freescale/m5208evbe/u-boot.lds | 2 +- board/freescale/m52277evb/u-boot.lds | 2 +- board/freescale/m5235evb/u-boot.lds | 2 +- board/freescale/m5249evb/u-boot.lds | 2 +- board/freescale/m5253demo/u-boot.lds | 2 +- board/freescale/m5253evbe/u-boot.lds | 2 +- board/freescale/m5271evb/u-boot.lds | 2 +- board/freescale/m5272c3/u-boot.lds | 2 +- board/freescale/m5275evb/u-boot.lds | 2 +- board/freescale/m5282evb/u-boot.lds | 2 +- board/freescale/m53017evb/u-boot.lds | 2 +- board/freescale/m5329evb/u-boot.lds | 2 +- board/freescale/m5373evb/u-boot.lds | 2 +- board/freescale/m54418twr/u-boot.lds | 2 +- board/freescale/m54451evb/u-boot.lds | 2 +- board/freescale/m54455evb/u-boot.lds | 2 +- board/freescale/m547xevb/u-boot.lds | 2 +- board/freescale/m548xevb/u-boot.lds | 2 +- board/freescale/mx31ads/u-boot.lds | 2 +- board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +- board/gaisler/gr_ep2s60/u-boot.lds | 2 +- board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +- board/gaisler/grsim/u-boot.lds | 2 +- board/gaisler/grsim_leon2/u-boot.lds | 2 +- board/gen860t/u-boot-flashenv.lds | 2 +- board/gen860t/u-boot.lds | 2 +- board/genietv/u-boot.lds | 2 +- board/hermes/u-boot.lds | 2 +- board/hymod/u-boot.lds | 2 +- board/icu862/u-boot.lds | 2 +- board/idmr/u-boot.lds | 2 +- board/ip860/u-boot.lds | 2 +- board/ivm/u-boot.lds | 2 +- board/korat/u-boot-F7FC.lds | 2 +- board/kup/kup4k/u-boot.lds | 2 +- board/kup/kup4x/u-boot.lds | 2 +- board/lwmon/u-boot.lds | 2 +- board/manroland/uc100/u-boot.lds | 2 +- board/matrix_vision/mvsmr/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds | 2 +- board/mousse/u-boot.lds | 2 +- board/mvblue/u-boot.lds | 2 +- board/netphone/u-boot.lds | 2 +- board/netta/u-boot.lds | 2 +- board/netta2/u-boot.lds | 2 +- board/netvia/u-boot.lds | 2 +- board/nx823/u-boot.lds | 2 +- board/openrisc/openrisc-generic/u-boot.lds | 2 +- board/quantum/u-boot.lds | 2 +- board/r360mpi/u-boot.lds | 2 +- board/rbc823/u-boot.lds | 2 +- board/renesas/sh7757lcr/u-boot.lds | 2 +- board/rsdproto/u-boot.lds | 2 +- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 2 +- board/samsung/smdk6400/u-boot-nand.lds | 2 +- board/sandpoint/u-boot.lds | 2 +- board/sixnet/u-boot.lds | 2 +- board/snmc/qs850/u-boot.lds | 2 +- board/snmc/qs860t/u-boot.lds | 2 +- board/spc1920/u-boot.lds | 2 +- board/spd8xx/u-boot.lds | 2 +- board/stx/stxxtc/u-boot.lds | 2 +- board/svm_sc8xx/u-boot.lds | 2 +- board/tqc/tqm8xx/u-boot.lds | 2 +- board/v37/u-boot.lds | 2 +- board/vpac270/u-boot-spl.lds | 2 +- common/cmd_help.c | 2 +- common/command.c | 1 + config.mk | 2 - helper.mk | 64 ------ include/command.h | 2 +- include/env_callback.h | 2 +- include/linker_lists.h | 244 +++++++++++++++++----- nand_spl/board/freescale/mpc8536ds/Makefile | 6 +- nand_spl/board/freescale/mpc8569mds/Makefile | 6 +- nand_spl/board/freescale/mpc8572ds/Makefile | 6 +- nand_spl/board/freescale/mx31pdk/Makefile | 6 +- nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +- nand_spl/board/freescale/p1010rdb/Makefile | 6 +- nand_spl/board/freescale/p1023rds/Makefile | 6 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 6 +- nand_spl/board/karo/tx25/Makefile | 6 +- nand_spl/board/karo/tx25/u-boot.lds | 2 +- nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +- spl/Makefile | 6 +- 152 files changed, 342 insertions(+), 305 deletions(-) delete mode 100644 helper.mk
Makefile +1 -5
@@ -595,11 +595,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) -$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst +$(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
arch/arm/cpu/arm920t/ep93xx/u-boot.lds +1 -1
@@ -51,7 +51,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +1 -1
@@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +1 -1
@@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/arm/cpu/ixp/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/arm/cpu/u-boot.lds +1 -1
@@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/avr32/cpu/u-boot.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/blackfin/cpu/u-boot.lds +1 -1
@@ -114,7 +114,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } >ram_data .text_l1 :
arch/microblaze/cpu/u-boot.lds +1 -1
@@ -54,7 +54,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .bss ALIGN(0x4):
arch/mips/cpu/u-boot.lds +1 -1
@@ -64,7 +64,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } uboot_end_data = .;
arch/nds32/cpu/n1213/u-boot.lds +1 -1
@@ -55,7 +55,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
arch/nios2/cpu/u-boot.lds +1 -1
@@ -48,7 +48,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } /* INIT DATA sections - "Small" data (see the gcc -G option)
arch/powerpc/cpu/74xx_7xx/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc512x/u-boot.lds +1 -1
@@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc5xx/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
arch/powerpc/cpu/mpc5xxx/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc8220/u-boot.lds +1 -1
@@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc824x/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc8260/u-boot.lds +1 -1
@@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc83xx/u-boot.lds +1 -1
@@ -61,7 +61,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +1 -1
@@ -54,7 +54,7 @@ SECTIONS _edata = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(8);
arch/powerpc/cpu/mpc85xx/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
arch/powerpc/cpu/mpc86xx/u-boot.lds +1 -1
@@ -67,7 +67,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
arch/powerpc/cpu/ppc4xx/u-boot.lds +1 -1
@@ -81,7 +81,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
arch/sandbox/cpu/u-boot.lds +1 -1
@@ -27,7 +27,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } __u_boot_sandbox_option_start = .;
arch/sh/cpu/sh2/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } PROVIDE (reloc_dst_end = .);
arch/sh/cpu/sh3/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } PROVIDE (reloc_dst_end = .);
arch/sh/cpu/sh4/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } PROVIDE (reloc_dst_end = .);
arch/x86/cpu/u-boot.lds +1 -1
@@ -36,7 +36,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
board/BuS/eb_cpu5282/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/LEOX/elpt860/u-boot.lds +1 -1
@@ -89,7 +89,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/RPXClassic/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/RPXlite/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/RPXlite_dw/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/RRvision/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/actux1/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN (4);
board/actux2/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN (4);
board/actux3/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN (4);
board/adder/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/ait/cam_enc_4xx/u-boot-spl.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } >.sram . = ALIGN(4); .rel.dyn : {
board/altera/nios2-generic/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } /* INIT DATA sections - "Small" data (see the gcc -G option)
board/amcc/acadia/u-boot-nand.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/amcc/bamboo/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/amcc/canyonlands/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/amcc/kilauea/u-boot-nand.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/amcc/sequoia/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/amcc/sequoia/u-boot-ram.lds +1 -1
@@ -66,7 +66,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/astro/mcf5373l/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/cobra5272/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/cogent/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/dave/PPChameleonEVB/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/davinci/da8xxevm/u-boot-spl-da850evm.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } >.sram . = ALIGN(4);
board/davinci/da8xxevm/u-boot-spl-hawk.lds +1 -1
@@ -59,7 +59,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
board/dvlhost/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN (4);
board/eltec/mhpc/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/emk/top860/u-boot.lds +1 -1
@@ -70,7 +70,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/ep88x/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/esd/dasa_sim/u-boot.lds +1 -1
@@ -76,7 +76,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/esd/pmc440/u-boot-nand.lds +1 -1
@@ -104,7 +104,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/esd/tasreg/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/esteem192e/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/evb64260/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/fads/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/flagadm/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/freescale/m5208evbe/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m52277evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5235evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5249evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5253demo/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5253evbe/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5271evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5272c3/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5275evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5282evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m53017evb/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5329evb/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m5373evb/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m54418twr/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m54451evb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m54455evb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m547xevb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/m548xevb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/freescale/mx31ads/u-boot.lds +1 -1
@@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
board/gaisler/gr_cpci_ax2000/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .data :
board/gaisler/gr_ep2s60/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .data :
board/gaisler/gr_xc3s_1500/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .data :
board/gaisler/grsim/u-boot.lds +1 -1
@@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .data :
board/gaisler/grsim_leon2/u-boot.lds +1 -1
@@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .data :
board/gen860t/u-boot-flashenv.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/gen860t/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/genietv/u-boot.lds +1 -1
@@ -83,7 +83,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/hermes/u-boot.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/hymod/u-boot.lds +1 -1
@@ -113,7 +113,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/icu862/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/idmr/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/ip860/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/ivm/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/korat/u-boot-F7FC.lds +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/kup/kup4k/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/kup/kup4x/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/lwmon/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/manroland/uc100/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/matrix_vision/mvsmr/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/mbx8xx/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/mousse/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/mvblue/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/netphone/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/netta/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/netta2/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/netvia/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/nx823/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/openrisc/openrisc-generic/u-boot.lds +1 -1
@@ -29,7 +29,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } .rodata : {
board/quantum/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/r360mpi/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/rbc823/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = .;
board/renesas/sh7757lcr/u-boot.lds +1 -1
@@ -79,7 +79,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } PROVIDE (reloc_dst_end = .);
board/rsdproto/u-boot.lds +1 -1
@@ -100,7 +100,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/samsung/smdk5250/smdk5250-uboot-spl.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } >.sram . = ALIGN(4);
board/samsung/smdk6400/u-boot-nand.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS . = align(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = align(4);
board/sandpoint/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/sixnet/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/snmc/qs850/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/snmc/qs860t/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/spc1920/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/spd8xx/u-boot.lds +1 -1
@@ -78,7 +78,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/stx/stxxtc/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/svm_sc8xx/u-boot.lds +1 -1
@@ -86,7 +86,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/tqc/tqm8xx/u-boot.lds +1 -1
@@ -82,7 +82,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/v37/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); }
board/vpac270/u-boot-spl.lds +1 -1
@@ -58,7 +58,7 @@ SECTIONS } .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
common/cmd_help.c +1 -1
@@ -41,7 +41,7 @@ U_BOOT_CMD( );/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd) = {"?" ,CONFIG_SYS_MAXARGS ,1 , do_help,"alias for 'help'" , #ifdef CONFIG_SYS_LONGHELP
common/command.c +1 -0
@@ -507,6 +507,7 @@ static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])int result; result = (cmdtp->cmd)(cmdtp, flag, argc, argv); +if (result)debug ("Command failed, result=%d" , result);return result;
config.mk +0 -2
@@ -23,8 +23,6 @@ ######################################################################### -include $(TOPDIR)/helper.mk - ifeq ($(CURDIR),$(SRCTREE)) dir := else
helper.mk deleted +0 -64
64 lines not on this page · raw message
include/command.h +1 -1
@@ -173,7 +173,7 @@ int cmd_process(int flag, int argc, char * const argv[], _usage, _help, NULL)#define U_BOOT_CMD_COMPLETE (_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ - ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ _usage, _help, _comp);
include/env_callback.h +1 -1
@@ -76,7 +76,7 @@ void env_callback_init(ENTRY *var_entry); }#else #define U_BOOT_ENV_CALLBACK (name, callback) \ - ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ + ll_entry_declare(struct env_clbk_tbl, name, env_clbk) = \ {#name, callback}#endif
include/linker_lists.h +193 -51
315 lines not on this page · raw message
nand_spl/board/freescale/mpc8536ds/Makefile +1 -5
@@ -62,11 +62,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mpc8569mds/Makefile +1 -5
@@ -62,11 +62,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mpc8572ds/Makefile +1 -5
@@ -62,11 +62,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mx31pdk/Makefile +1 -5
@@ -38,11 +38,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mx31pdk/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
nand_spl/board/freescale/p1010rdb/Makefile +1 -5
@@ -62,11 +62,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/p1023rds/Makefile +1 -5
@@ -57,11 +57,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/p1_p2_rdb/Makefile +1 -5
@@ -62,11 +62,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/karo/tx25/Makefile +1 -5
@@ -59,11 +59,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/karo/tx25/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
nand_spl/board/samsung/smdk6400/u-boot.lds +1 -1
@@ -53,7 +53,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
spl/Makefile +1 -5
@@ -178,11 +178,7 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) -$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend +$(obj)u-boot-spl.lds: $(LDSCRIPT) depend $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend
Signature · 1 line
1.7.10.4
PATCH 1/1 Refactor linker-generated arrays
Hi Albert,
2013/2/2 Albert ARIBAUD <[email protected]>:
Quoted 7 lines
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Quoted 6 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>---
for the MIPS part:
BTW: if we use
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)))
}we can get rid of the undef magic in the final link of u-boot
Makefile +0 -2
@@ -559,10 +559,8 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e
's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \- $$UNDEF_LST $(__OBJS) \
+ $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
Signature · 2 lines
Best regards, Daniel
PATCH 1/1 Refactor linker-generated arrays
Dear Daniel Schwierzeck,
Quoted 21 lines
Hi Albert,
2013/2/2 Albert ARIBAUD <[email protected]>:
Quoted 7 lines
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.Quoted 6 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>---
for the MIPS part:
Tested-by Daniel Schwierzeck <[email protected]>
Quoted 7 lines
BTW: if we use
.u_boot_list : { KEEP(*(SORT(.u_boot_list*))) }we can get rid of the undef magic in the final link of u-boot
UUuuuu, that's amazing. We're shifting from one kind of black magic onto another voodoo. But certainly, this KEEP() is much cleaner, I like it :)
Best regards,
Marek Vasut
PATCH 1/1 Refactor linker-generated arrays
In reply to Albert ARIBAUDHello Albert,
Quoted 6 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Just tested this patch and it solves my "ll_entry_* work only after relocation" problem posted here:
http://lists.denx.de/pipermail/u-boot/2013-February/145711.html
Will test it deeper on monday, thanks!
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 Refactor linker-generated arrays
In reply to Albert ARIBAUDHello Albert,
Quoted 7 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Quoted 6 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>---
Command completion currently traps with U-Boot master on a twister board, as mentioned in [1]. Depending on random, valid changes in the code, the name pointers in the command list can become corrupted. Although this patch shouldn't effect code running after relocation, it does prevent the incorrect pointers and solves mentioned problem. The exact reason is unknown, but it might be that code running before relocation corrupts the data used after relocation.
At least this patch fixes the behaviour for the twister and prevents that I get completely insane, thanks!
For the twister:
Thanks,
Jeroen
[1] http://lists.denx.de/pipermail/u-boot/2013-February/145709.html
PATCH 1/1 Refactor linker-generated arrays
In reply to Albert ARIBAUDHello Albert,
Quoted 7 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Quoted 6 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>---
for arm926ejs
Just one minor comment ...
[...]
common/command.c static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) · line 510
Quoted 9 lines
common/command.c +1
-0@@ -507,6 +507,7 @@ static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])int result; result = (cmdtp->cmd)(cmdtp, flag, argc, argv); +
remove this Codingstyle change please.
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 Refactor linker-generated arrays
Hi Heiko,
Quoted 14 lines · Heiko Schocher
Hello Albert,
Quoted 11 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Quoted 6 lines
Quoted 2 lines
Signed-off-by Albert ARIBAUD <[email protected]>---
for arm926ejs
Tested-by Heiko Schocher <[email protected]>
Thanks!
Quoted 10 lines
Just one minor comment ...
[...]
Quoted 7 lines
common/command.c +0
-0@@ -507,6 +507,7 @@ static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])int result;
Quoted 4 lines
common/command.c static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) · line 510
Quoted 2 lines
common/command.c +1
-0result = (cmdtp->cmd)(cmdtp, flag, argc, argv); +remove this Codingstyle change please.
Sorry, should have triple-checked that -- this single blank line change in common/command.c stems from ad hoc code I'd added here for test purposes when the patch was only proof-of-concept. Will fix in V2.
Quoted 2 lines
bye,
Heiko
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 Refactor linker-generated arrays
In reply to Albert ARIBAUDHi Albert,
Quoted 7 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Quoted 5 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>
Tested on avr32. The patch seems to work (basic shell testing), however it generates an aliasing warning:
---8<---
abiessmann@azuregos % PATH=$AVR32_PATH:$PATH BUILD_DIR=/tmp/build_avr32 MAKEALL_LOGDIR=/tmp/LOG BUILD_NCPUS=4 BUILD_NBUILDS=4 ./MAKEALL atstk1002 Configuring for atstk1002 board...
text data bss dec hex filename
116315 8972 211900 337187 52523 /tmp/build_avr32/atstk1002/u-bootenv_callback.c: In function 'find_env_callback':
env_callback.c:47: warning: dereferencing pointer 'clbkp' does break strict-aliasing rules
env_callback.c:44: note: initialized from here env_callback.c:46: note: initialized from here
--->8---
I think it has something to do with tha fact that you re-cast the anonymous struct 'start' here:
---8<---
#define ll_entry_start(_type, _list)
({
static struct {} start __aligned(4) __attribute__((unused,
section(".u_boot_list_2_"#_list"_1")));
(_type *)&start;
})--->8---
I think other gcc-4.4 users will see the same error. Currently I have no time to dive into this.
Best regards
Andreas Bie?mann
PATCH 1/1 Refactor linker-generated arrays
Hi Andreas,
Quoted 35 lines · Andreas Bie?mann
Hi Albert,
Quoted 7 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.Quoted 5 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>Tested on avr32. The patch seems to work (basic shell testing), however it generates an aliasing warning:
---8<---
abiessmann at azuregos % PATH=$AVR32_PATH:$PATH BUILD_DIR=/tmp/build_avr32 MAKEALL_LOGDIR=/tmp/LOG BUILD_NCPUS=4 BUILD_NBUILDS=4 ./MAKEALL atstk1002 Configuring for atstk1002 board...
text data bss dec hex filename
116315 8972 211900 337187 52523/tmp/build_avr32/atstk1002/u-bootenv_callback.c: In function 'find_env_callback':
env_callback.c:47: warning: dereferencing pointer 'clbkp' does break strict-aliasing rules
env_callback.c:44: note: initialized from here env_callback.c:46: note: initialized from here
--->8---I think it has something to do with tha fact that you re-cast the anonymous struct 'start' here:
Quoted 8 lines
---8<---
#definell_entry_start(_type, _list)({ static struct {} start __aligned(4) __attribute__((unused, section(".u_boot_list_2_"#_list"_1"))); (_type *)&start; })--->8---
Thanks Andreas for bringing this to my attention -- I'm surprised that there's only one such warning, though, as there are may such casts. I'll get my hands on a 4.4 compiler and try to find a way to cleanly avoid the warning.
Quoted 2 lines
I think other gcc-4.4 users will see the same error. Currently I have no time to dive into this.
Don't bother. I'll do the diving. :)
Quoted 3 lines
Best regards
Andreas Bie?mann
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 Refactor linker-generated arrays
In reply to Andreas BießmannHi Andreas,
Quoted 42 lines · Andreas Bie?mann
Hi Albert,
Quoted 7 lines · Albert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type
R_ARM_ABS32to becomeR_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.Quoted 5 lines
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Signed-off-by Albert ARIBAUD <[email protected]>Tested on avr32. The patch seems to work (basic shell testing), however it generates an aliasing warning:
---8<---
abiessmann at azuregos % PATH=$AVR32_PATH:$PATH BUILD_DIR=/tmp/build_avr32 MAKEALL_LOGDIR=/tmp/LOG BUILD_NCPUS=4 BUILD_NBUILDS=4 ./MAKEALL atstk1002 Configuring for atstk1002 board...
text data bss dec hex filename
116315 8972 211900 337187 52523/tmp/build_avr32/atstk1002/u-bootenv_callback.c: In function 'find_env_callback':
env_callback.c:47: warning: dereferencing pointer 'clbkp' does break strict-aliasing rules
env_callback.c:44: note: initialized from here env_callback.c:46: note: initialized from here
--->8---I think it has something to do with tha fact that you re-cast the anonymous struct 'start' here:
---8<---
#definell_entry_start(_type, _list)({ static struct {} start __aligned(4) __attribute__((unused, section(".u_boot_list_2_"#_list"_1"))); (_type *)&start; })
Quoted 4 lines
--->8---
I think other gcc-4.4 users will see the same error. Currently I have no time to dive into this.
I have dug into it and found a way to avoid GCC 4.4 or below to warn about aliasing, by replacing 'struct {}' with 'char[0]' as the 0-byte-size type.
I still have some warnings through, regarding some regions not being declared:
avr32-ld:built in linker script:15: warning: memory region `FLASH' not declared
avr32-ld:built in linker script:69: warning: memory region `CPUSRAM' not declared
It appears 'normal' in that without my patch, the same error occurs; but I'd prefer that you confirm whether you have the same warnings on your side.
Quoted 3 lines
Best regards
Andreas Bie?mann
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 Refactor linker-generated arrays
Hi Albert,
Quoted 8 lines · Albert ARIBAUD
Hi Andreas,
Quoted 3 lines · Andreas Bie?mann
Hi Albert,
On 02.02.2013 18:02, Albert ARIBAUD wrote:
<snip strict aliasing error on gcc-4.4>
Quoted 11 lines
I have dug into it and found a way to avoid GCC 4.4 or below to warn about aliasing, by replacing 'struct {}' with 'char[0]' as the 0-byte-size type.
I still have some warnings through, regarding some regions not being declared:
avr32-ld:built in linker script:15: warning: memory region `FLASH' not declared
avr32-ld:built in linker script:69: warning: memory region `CPUSRAM' not declared
I assume you use Mike Frysingers precompiled avr32 toolchain. I know about that warnings and beware, these toolchain produce defective binaries! The u-boot does not relocate itself properly with these newlib toolchains (also the atmel provided one).
Quoted 3 lines
It appears 'normal' in that without my patch, the same error occurs; but I'd prefer that you confirm whether you have the same warnings on your side.
It's ok so far, the arm-linux toolchain I have do not produce these warnings. Kan you provide the patch so I will do a runtime test.
Best regards
Andreas Bie?mann
PATCH 1/1 Refactor linker-generated arrays
Quoted 3 lines · Andreas Bie?mann
Hi Albert,
On 02/16/2013 07:20 PM, Albert ARIBAUD wrote:
<snip>
Quoted 1 line
It's ok so far, the arm-linux toolchain I have do not produce these
I mean avr32-linux ... damn weekend ...
PATCH 1/1 Refactor linker-generated arrays
Hi Andreas,
Quoted 10 lines · Andreas Bie?mann
Quoted 3 lines · Andreas Bie?mann
Hi Albert,
On 02/16/2013 07:20 PM, Albert ARIBAUD wrote:
<snip>
Quoted 1 line
It's ok so far, the arm-linux toolchain I have do not produce these
I mean avr32-linux ... damn weekend ...
Thanks Andreas for the feedback. I am currently testing V2 locally and will send it out in a few hours hopefully.
Amicalement,
Signature · 1 line
Albert.
v2 cover Get rid of R_ARM_ABS32 relocation records
In reply to Albert ARIBAUDR_ARM_ABS32 relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand, R_ARM_RELATIVE records make references correct before as well as after relocation.
This patch series aims at removing all R_ARM_ABS32 relocations from ARM targets.
the main contributor of R_ARM_ABS32 relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate as R_ARM_ABS32 even though they are supposed *not* to be absolute.
V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produce R_ARM_ABS32 relocations either.
With V2, none of the targets built with MAKEALL -a arm produces any R_ARM_ABS32 relocation.
This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- added KEEP() to all linker files
- removed spurious change to common/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removed board/micronas/vct/u-boot.lds
- removed all references to u-boot.lst
Albert ARIBAUD (4):
arm: omap: map u_boot_lists section to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make __bss_start and __bss_end__ compiler-generated Refactor linker-generated arrays
.gitignore | 1 - Makefile | 13 +- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 - arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 - arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 67 ++++++ arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 4 - arch/arm/cpu/ixp/u-boot.lds | 14 +- arch/arm/cpu/u-boot-spl.lds | 93 ++++++++ arch/arm/cpu/u-boot.lds | 14 +- arch/arm/lib/Makefile | 1 + arch/arm/lib/bss.c | 39 ++++ arch/avr32/cpu/u-boot.lds | 2 +- arch/blackfin/cpu/u-boot.lds | 2 +- arch/microblaze/cpu/u-boot.lds | 2 +- arch/mips/cpu/u-boot.lds | 2 +- arch/nds32/cpu/n1213/u-boot.lds | 2 +- arch/nios2/cpu/u-boot.lds | 2 +- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +- arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +- arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +- arch/sandbox/cpu/u-boot.lds | 2 +- arch/sh/cpu/sh2/u-boot.lds | 2 +- arch/sh/cpu/sh3/u-boot.lds | 2 +- arch/sh/cpu/sh4/u-boot.lds | 2 +- arch/x86/cpu/u-boot.lds | 2 +- board/BuS/eb_cpu5282/u-boot.lds | 2 +- board/LEOX/elpt860/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds.debug | 2 +- board/RPXlite/u-boot.lds | 2 +- board/RPXlite/u-boot.lds.debug | 2 +- board/RPXlite_dw/u-boot.lds | 2 +- board/RPXlite_dw/u-boot.lds.debug | 2 +- board/RRvision/u-boot.lds | 2 +- board/actux1/u-boot.lds | 24 ++- board/actux2/u-boot.lds | 24 ++- board/actux3/u-boot.lds | 18 +- board/adder/u-boot.lds | 2 +- board/ait/cam_enc_4xx/u-boot-spl.lds | 4 - board/altera/nios2-generic/u-boot.lds | 2 +- board/amcc/acadia/u-boot-nand.lds | 2 +- board/amcc/bamboo/u-boot-nand.lds | 2 +- board/amcc/canyonlands/u-boot-nand.lds | 2 +- board/amcc/kilauea/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-ram.lds | 2 +- board/astro/mcf5373l/u-boot.lds | 2 +- board/cobra5272/u-boot.lds | 2 +- board/cogent/u-boot.lds | 2 +- board/cogent/u-boot.lds.debug | 2 +- board/cray/L1/u-boot.lds.debug | 2 +- board/dave/PPChameleonEVB/u-boot.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 - board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 - board/dvlhost/u-boot.lds | 18 +- board/eltec/mhpc/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds.debug | 2 +- board/emk/top860/u-boot.lds | 2 +- board/ep88x/u-boot.lds | 2 +- board/esd/dasa_sim/u-boot.lds | 2 +- board/esd/pmc440/u-boot-nand.lds | 2 +- board/esd/tasreg/u-boot.lds | 2 +- board/esteem192e/u-boot.lds | 2 +- board/evb64260/u-boot.lds | 2 +- board/fads/u-boot.lds | 2 +- board/flagadm/u-boot.lds | 2 +- board/flagadm/u-boot.lds.debug | 2 +- board/freescale/m5208evbe/u-boot.lds | 2 +- board/freescale/m52277evb/u-boot.lds | 2 +- board/freescale/m5235evb/u-boot.lds | 2 +- board/freescale/m5249evb/u-boot.lds | 2 +- board/freescale/m5253demo/u-boot.lds | 2 +- board/freescale/m5253evbe/u-boot.lds | 2 +- board/freescale/m5271evb/u-boot.lds | 2 +- board/freescale/m5272c3/u-boot.lds | 2 +- board/freescale/m5275evb/u-boot.lds | 2 +- board/freescale/m5282evb/u-boot.lds | 2 +- board/freescale/m53017evb/u-boot.lds | 2 +- board/freescale/m5329evb/u-boot.lds | 2 +- board/freescale/m5373evb/u-boot.lds | 2 +- board/freescale/m54418twr/u-boot.lds | 2 +- board/freescale/m54451evb/u-boot.lds | 2 +- board/freescale/m54455evb/u-boot.lds | 2 +- board/freescale/m547xevb/u-boot.lds | 2 +- board/freescale/m548xevb/u-boot.lds | 2 +- board/freescale/mx31ads/u-boot.lds | 16 +- board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +- board/gaisler/gr_ep2s60/u-boot.lds | 2 +- board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +- board/gaisler/grsim/u-boot.lds | 2 +- board/gaisler/grsim_leon2/u-boot.lds | 2 +- board/gen860t/u-boot-flashenv.lds | 2 +- board/gen860t/u-boot.lds | 2 +- board/genietv/u-boot.lds | 2 +- board/genietv/u-boot.lds.debug | 2 +- board/hermes/u-boot.lds | 2 +- board/hermes/u-boot.lds.debug | 2 +- board/hymod/u-boot.lds | 2 +- board/hymod/u-boot.lds.debug | 2 +- board/icu862/u-boot.lds | 2 +- board/icu862/u-boot.lds.debug | 2 +- board/idmr/u-boot.lds | 2 +- board/ip860/u-boot.lds | 2 +- board/ip860/u-boot.lds.debug | 2 +- board/ivm/u-boot.lds | 2 +- board/ivm/u-boot.lds.debug | 2 +- board/korat/u-boot-F7FC.lds | 2 +- board/kup/kup4k/u-boot.lds | 2 +- board/kup/kup4k/u-boot.lds.debug | 2 +- board/kup/kup4x/u-boot.lds | 2 +- board/kup/kup4x/u-boot.lds.debug | 2 +- board/lwmon/u-boot.lds | 2 +- board/lwmon/u-boot.lds.debug | 2 +- board/manroland/uc100/u-boot.lds | 2 +- board/matrix_vision/mvsmr/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds.debug | 2 +- board/mousse/u-boot.lds | 2 +- board/mpl/pip405/u-boot.lds.debug | 2 +- board/mvblue/u-boot.lds | 2 +- board/netphone/u-boot.lds | 2 +- board/netphone/u-boot.lds.debug | 2 +- board/netta/u-boot.lds | 2 +- board/netta/u-boot.lds.debug | 2 +- board/netta2/u-boot.lds | 2 +- board/netta2/u-boot.lds.debug | 2 +- board/netvia/u-boot.lds | 2 +- board/netvia/u-boot.lds.debug | 2 +- board/nx823/u-boot.lds | 2 +- board/nx823/u-boot.lds.debug | 2 +- board/openrisc/openrisc-generic/u-boot.lds | 2 +- board/quantum/u-boot.lds | 2 +- board/r360mpi/u-boot.lds | 2 +- board/rbc823/u-boot.lds | 2 +- board/renesas/sh7752evb/u-boot.lds | 2 +- board/renesas/sh7757lcr/u-boot.lds | 2 +- board/rsdproto/u-boot.lds | 2 +- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 2 +- board/samsung/smdk6400/u-boot-nand.lds | 2 +- board/sandburst/karef/u-boot.lds.debug | 2 +- board/sandburst/metrobox/u-boot.lds.debug | 2 +- board/sandpoint/u-boot.lds | 2 +- board/sixnet/u-boot.lds | 2 +- board/snmc/qs850/u-boot.lds | 2 +- board/snmc/qs860t/u-boot.lds | 2 +- board/spc1920/u-boot.lds | 2 +- board/spd8xx/u-boot.lds | 2 +- board/spd8xx/u-boot.lds.debug | 2 +- board/stx/stxxtc/u-boot.lds | 2 +- board/stx/stxxtc/u-boot.lds.debug | 2 +- board/svm_sc8xx/u-boot.lds | 2 +- board/tqc/tqm8xx/u-boot.lds | 2 +- board/v37/u-boot.lds | 2 +- board/vpac270/u-boot-spl.lds | 4 - board/w7o/u-boot.lds.debug | 2 +- board/xes/xpedite1000/u-boot.lds.debug | 2 +- common/cmd_help.c | 2 +- config.mk | 2 - doc/README.commands | 18 +- helper.mk | 64 ------ include/command.h | 2 +- include/configs/am335x_evm.h | 2 +- include/configs/pcm051.h | 2 +- include/env_callback.h | 2 +- include/linker_lists.h | 252 +++++++++++++++++----- nand_spl/board/freescale/mpc8536ds/Makefile | 7 +- nand_spl/board/freescale/mpc8569mds/Makefile | 7 +- nand_spl/board/freescale/mpc8572ds/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +- nand_spl/board/freescale/p1010rdb/Makefile | 7 +- nand_spl/board/freescale/p1023rds/Makefile | 7 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 7 +- nand_spl/board/karo/tx25/Makefile | 7 +- nand_spl/board/karo/tx25/u-boot.lds | 2 +- nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +- spl/.gitignore | 1 - spl/Makefile | 8 +- 190 files changed, 665 insertions(+), 424 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/u-boot-spl.lds create mode 100644 arch/arm/cpu/u-boot-spl.lds create mode 100644 arch/arm/lib/bss.c delete mode 100644 helper.mk
Signature · 1 line
1.7.10.4
PATCH v2 1/4 arm: omap: map u_boot_lists section to .sram
Output section .u_boot_list was left unmapped in u-boot-spl.lds for omap-common, causing the location counter to roll back to bteween .rodata and .data, making __image_copy_end and _end symbols wrong.
Mapping output section .u_boot_list to memory .sram fixes these symbols' mapping.
This modifies the SPL binary but has no functional impact, as __image_copy_end and _end are never used in SPLs and u_boot_list is empty for all 29 boards affected (omap4_sdp4430 eco5pk igep0030 am335x_evm_uart3 omap3_beagle am3517_crane igep0032 mt_ventoux pcm051 am3517_evm omap3_evm_quick_mmc am335x_evm_uart2 am335x_evm_spiboot am335x_evm_uart1 omap3_evm igep0030_nand omap3_overo igep0020 am335x_evm omap4_panda omap5_evm am335x_evm_uart4 devkit8000 tricorder mcx twister omap3_evm_quick_nand am335x_evm_uart5 igep0020_nand).
---
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS .u_boot_list : { #include <u-boot.lst> - } + } > .sram . = ALIGN(4); __image_copy_end = .;
Signature · 1 line
1.7.10.4
PATCH v2 2/4 Remove linker lists (LGAs) from SPL linker scripts
Many SPL linker scripts needlessly include linker lists (aka LGAs). Remove them whenever possible; keep it only in the seven am335x_evm variants (am335x_evm, am335x_evm_uart[1-5], am335x_evm_spiboot), where there is actual content in output section .u_boot_list.
This commit keeps all u-boot.bin and u-boot-spl.bin in ARM targets byte-identical.
---
Changes in v2:
- removed useless linker script sections in SPL lds files
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 -- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 -- arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 67 +++++++++++++++++ arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 4 - arch/arm/cpu/u-boot-spl.lds | 93 ++++++++++++++++++++++++ board/ait/cam_enc_4xx/u-boot-spl.lds | 4 - board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 -- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 -- board/vpac270/u-boot-spl.lds | 4 - include/configs/am335x_evm.h | 2 +- include/configs/pcm051.h | 2 +- spl/Makefile | 8 +- 12 files changed, 164 insertions(+), 42 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/u-boot-spl.lds create mode 100644 arch/arm/cpu/u-boot-spl.lds
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0 -6
@@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*)
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +0 -6
@@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*)
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds new file +67 -0
67 lines not on this page · raw message
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +0 -4
@@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - .u_boot_list : { - #include <u-boot.lst> - } > .sram - . = ALIGN(4); __image_copy_end = .; _end = .;
arch/arm/cpu/u-boot-spl.lds new file +93 -0
93 lines not on this page · raw message
board/ait/cam_enc_4xx/u-boot-spl.lds +0 -4
@@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*)
board/davinci/da8xxevm/u-boot-spl-da850evm.lds +0 -5
@@ -49,11 +49,6 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*)
board/davinci/da8xxevm/u-boot-spl-hawk.lds +0 -5
@@ -58,11 +58,6 @@ SECTIONS } . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); __rel_dyn_start = .; __rel_dyn_end = .; __dynsym_start = .;
board/vpac270/u-boot-spl.lds +0 -4
@@ -57,10 +57,6 @@ SECTIONS *(.data) } - .u_boot_list : { - #include <u-boot.lst> - } - . = ALIGN(4); .rel.dyn : {
include/configs/am335x_evm.h +1 -1
@@ -282,7 +282,7 @@#define CONFIG_SPL_SPI_CS 0#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000#define CONFIG_SPL_MUSB_NEW_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_AM33XX_BCH
include/configs/pcm051.h +1 -1
@@ -234,7 +234,7 @@#define CONFIG_SPL_SPI_CS 0#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"/* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
spl/Makefile +2 -6
@@ -119,7 +119,7 @@ ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) - LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds + LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) $(error could not find linker script)
@@ -177,11 +177,7 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) -$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend +$(obj)u-boot-spl.lds: $(LDSCRIPT) depend $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend
Signature · 1 line
1.7.10.4
PATCH v2 3/4 arm: make __bss_start and __bss_end__ compiler-generated
Turn __bss_start and __bss_end__ from linker-generated to compiler-generated symbols, causing relocations for these symbols to change type, from R_ARM_ABS32 to R_ARM_RELATIVE.
This should have no functional impact, as it affects references to __bss_start and __bss_end__ only before relocation, and no such references are done.
---
Changes in v2:
- made BSS start and end compiler-generated
arch/arm/cpu/ixp/u-boot.lds | 12 ++++++++--- arch/arm/cpu/u-boot.lds | 12 ++++++++--- arch/arm/lib/Makefile | 1 + arch/arm/lib/bss.c | 39 ++++++++++++++++++++++++++++++++++++ board/actux1/u-boot.lds | 22 +++++++++++++------- board/actux2/u-boot.lds | 22 +++++++++++++------- board/actux3/u-boot.lds | 16 +++++++++++---- board/dvlhost/u-boot.lds | 16 +++++++++++---- board/freescale/mx31ads/u-boot.lds | 14 +++++++++---- 9 files changed, 122 insertions(+), 32 deletions(-) create mode 100644 arch/arm/lib/bss.c
arch/arm/cpu/ixp/u-boot.lds +9 -3
@@ -67,11 +67,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end__ = .; + ___bssend___ = .; + } + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); } /DISCARD/ : { *(.dynstr*) }
arch/arm/cpu/u-boot.lds +9 -3
@@ -81,11 +81,17 @@ SECTIONS *(.mmutable) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end__ = .; + ___bssend___ = .; + } + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); } /DISCARD/ : { *(.dynstr*) }
arch/arm/lib/Makefile +1 -0
@@ -39,6 +39,7 @@ GLCOBJS += div0.o SOBJS-y += crt0.o ifndef CONFIG_SPL_BUILD +COBJS-y += bss.o COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
arch/arm/lib/bss.c new file +39 -0
@@ -0,0 +1,39 @@ +/* +* Copyright 2013 Albert ARIBAUD <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +/** +* These two symbols are declared in a C file so that the linker +* uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one +* it would use if the symbols were defined in the linker file. +* Using only R_ARM_RELATIVE relocation ensures that references to +* the symbols are correct after as well as before relocation. +* +* We need a 0-byte-size type for these symbols, and the compiler +* does not allow defining objects of C type 'void'. Using an empty +* struct is allowed by the compiler, but causes gcc versions 4.4 and +* below to complain about aliasing. Therefore we use the next best +* thing: zero-sized arrays, which are both 0-byte-size and exempt from +* aliasing warnings. +*/ + +char __bss_start[0] __attribute__((used, section(".__bss_start"))); +char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
board/actux1/u-boot.lds +15 -7
@@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) }
@@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + ___bssend___ = .; } - __bss_end__ =.; + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) }
board/actux2/u-boot.lds +15 -7
@@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) }
@@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + ___bssend___ = .; } - __bss_end__ =.; + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) }
board/actux3/u-boot.lds +12 -4
@@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + ___bssend___ = .; } - __bss_end__ =.; + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) }
board/dvlhost/u-boot.lds +12 -4
@@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + ___bssend___ = .; } - __bss_end__ =.; + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) }
board/freescale/mx31ads/u-boot.lds +10 -4
@@ -80,11 +80,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss) + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { + *(.bss*) . = ALIGN(4); - __bss_end__ = .; + ___bssend___ = .; + } + .bss_end ___bssend___ (OVERLAY) : { + KEEP(*(.__bss_end__)); } /DISCARD/ : { *(.bss*) }
Signature · 1 line
1.7.10.4
PATCH v2 4/4 Refactor linker-generated arrays
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after.
Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC.
Conflicts:
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds
---
Changes in v2:
- moved SPL linker script changes to their own commit
- added KEEP() to all linker files
- removed spurious change to common/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removed board/micronas/vct/u-boot.lds
- removed all references to u-boot.lst
.gitignore | 1 - Makefile | 13 +- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +- arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 2 +- arch/arm/cpu/ixp/u-boot.lds | 2 +- arch/arm/cpu/u-boot.lds | 2 +- arch/avr32/cpu/u-boot.lds | 2 +- arch/blackfin/cpu/u-boot.lds | 2 +- arch/microblaze/cpu/u-boot.lds | 2 +- arch/mips/cpu/u-boot.lds | 2 +- arch/nds32/cpu/n1213/u-boot.lds | 2 +- arch/nios2/cpu/u-boot.lds | 2 +- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +- arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +- arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +- arch/sandbox/cpu/u-boot.lds | 2 +- arch/sh/cpu/sh2/u-boot.lds | 2 +- arch/sh/cpu/sh3/u-boot.lds | 2 +- arch/sh/cpu/sh4/u-boot.lds | 2 +- arch/x86/cpu/u-boot.lds | 2 +- board/BuS/eb_cpu5282/u-boot.lds | 2 +- board/LEOX/elpt860/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds.debug | 2 +- board/RPXlite/u-boot.lds | 2 +- board/RPXlite/u-boot.lds.debug | 2 +- board/RPXlite_dw/u-boot.lds | 2 +- board/RPXlite_dw/u-boot.lds.debug | 2 +- board/RRvision/u-boot.lds | 2 +- board/actux1/u-boot.lds | 2 +- board/actux2/u-boot.lds | 2 +- board/actux3/u-boot.lds | 2 +- board/adder/u-boot.lds | 2 +- board/altera/nios2-generic/u-boot.lds | 2 +- board/amcc/acadia/u-boot-nand.lds | 2 +- board/amcc/bamboo/u-boot-nand.lds | 2 +- board/amcc/canyonlands/u-boot-nand.lds | 2 +- board/amcc/kilauea/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-ram.lds | 2 +- board/astro/mcf5373l/u-boot.lds | 2 +- board/cobra5272/u-boot.lds | 2 +- board/cogent/u-boot.lds | 2 +- board/cogent/u-boot.lds.debug | 2 +- board/cray/L1/u-boot.lds.debug | 2 +- board/dave/PPChameleonEVB/u-boot.lds | 2 +- board/dvlhost/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds.debug | 2 +- board/emk/top860/u-boot.lds | 2 +- board/ep88x/u-boot.lds | 2 +- board/esd/dasa_sim/u-boot.lds | 2 +- board/esd/pmc440/u-boot-nand.lds | 2 +- board/esd/tasreg/u-boot.lds | 2 +- board/esteem192e/u-boot.lds | 2 +- board/evb64260/u-boot.lds | 2 +- board/fads/u-boot.lds | 2 +- board/flagadm/u-boot.lds | 2 +- board/flagadm/u-boot.lds.debug | 2 +- board/freescale/m5208evbe/u-boot.lds | 2 +- board/freescale/m52277evb/u-boot.lds | 2 +- board/freescale/m5235evb/u-boot.lds | 2 +- board/freescale/m5249evb/u-boot.lds | 2 +- board/freescale/m5253demo/u-boot.lds | 2 +- board/freescale/m5253evbe/u-boot.lds | 2 +- board/freescale/m5271evb/u-boot.lds | 2 +- board/freescale/m5272c3/u-boot.lds | 2 +- board/freescale/m5275evb/u-boot.lds | 2 +- board/freescale/m5282evb/u-boot.lds | 2 +- board/freescale/m53017evb/u-boot.lds | 2 +- board/freescale/m5329evb/u-boot.lds | 2 +- board/freescale/m5373evb/u-boot.lds | 2 +- board/freescale/m54418twr/u-boot.lds | 2 +- board/freescale/m54451evb/u-boot.lds | 2 +- board/freescale/m54455evb/u-boot.lds | 2 +- board/freescale/m547xevb/u-boot.lds | 2 +- board/freescale/m548xevb/u-boot.lds | 2 +- board/freescale/mx31ads/u-boot.lds | 2 +- board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +- board/gaisler/gr_ep2s60/u-boot.lds | 2 +- board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +- board/gaisler/grsim/u-boot.lds | 2 +- board/gaisler/grsim_leon2/u-boot.lds | 2 +- board/gen860t/u-boot-flashenv.lds | 2 +- board/gen860t/u-boot.lds | 2 +- board/genietv/u-boot.lds | 2 +- board/genietv/u-boot.lds.debug | 2 +- board/hermes/u-boot.lds | 2 +- board/hermes/u-boot.lds.debug | 2 +- board/hymod/u-boot.lds | 2 +- board/hymod/u-boot.lds.debug | 2 +- board/icu862/u-boot.lds | 2 +- board/icu862/u-boot.lds.debug | 2 +- board/idmr/u-boot.lds | 2 +- board/ip860/u-boot.lds | 2 +- board/ip860/u-boot.lds.debug | 2 +- board/ivm/u-boot.lds | 2 +- board/ivm/u-boot.lds.debug | 2 +- board/korat/u-boot-F7FC.lds | 2 +- board/kup/kup4k/u-boot.lds | 2 +- board/kup/kup4k/u-boot.lds.debug | 2 +- board/kup/kup4x/u-boot.lds | 2 +- board/kup/kup4x/u-boot.lds.debug | 2 +- board/lwmon/u-boot.lds | 2 +- board/lwmon/u-boot.lds.debug | 2 +- board/manroland/uc100/u-boot.lds | 2 +- board/matrix_vision/mvsmr/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds.debug | 2 +- board/mousse/u-boot.lds | 2 +- board/mpl/pip405/u-boot.lds.debug | 2 +- board/mvblue/u-boot.lds | 2 +- board/netphone/u-boot.lds | 2 +- board/netphone/u-boot.lds.debug | 2 +- board/netta/u-boot.lds | 2 +- board/netta/u-boot.lds.debug | 2 +- board/netta2/u-boot.lds | 2 +- board/netta2/u-boot.lds.debug | 2 +- board/netvia/u-boot.lds | 2 +- board/netvia/u-boot.lds.debug | 2 +- board/nx823/u-boot.lds | 2 +- board/nx823/u-boot.lds.debug | 2 +- board/openrisc/openrisc-generic/u-boot.lds | 2 +- board/quantum/u-boot.lds | 2 +- board/r360mpi/u-boot.lds | 2 +- board/rbc823/u-boot.lds | 2 +- board/renesas/sh7752evb/u-boot.lds | 2 +- board/renesas/sh7757lcr/u-boot.lds | 2 +- board/rsdproto/u-boot.lds | 2 +- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 2 +- board/samsung/smdk6400/u-boot-nand.lds | 2 +- board/sandburst/karef/u-boot.lds.debug | 2 +- board/sandburst/metrobox/u-boot.lds.debug | 2 +- board/sandpoint/u-boot.lds | 2 +- board/sixnet/u-boot.lds | 2 +- board/snmc/qs850/u-boot.lds | 2 +- board/snmc/qs860t/u-boot.lds | 2 +- board/spc1920/u-boot.lds | 2 +- board/spd8xx/u-boot.lds | 2 +- board/spd8xx/u-boot.lds.debug | 2 +- board/stx/stxxtc/u-boot.lds | 2 +- board/stx/stxxtc/u-boot.lds.debug | 2 +- board/svm_sc8xx/u-boot.lds | 2 +- board/tqc/tqm8xx/u-boot.lds | 2 +- board/v37/u-boot.lds | 2 +- board/w7o/u-boot.lds.debug | 2 +- board/xes/xpedite1000/u-boot.lds.debug | 2 +- common/cmd_help.c | 2 +- config.mk | 2 - doc/README.commands | 18 +- helper.mk | 64 ------ include/command.h | 2 +- include/env_callback.h | 2 +- include/linker_lists.h | 252 +++++++++++++++++----- nand_spl/board/freescale/mpc8536ds/Makefile | 7 +- nand_spl/board/freescale/mpc8569mds/Makefile | 7 +- nand_spl/board/freescale/mpc8572ds/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +- nand_spl/board/freescale/p1010rdb/Makefile | 7 +- nand_spl/board/freescale/p1023rds/Makefile | 7 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 7 +- nand_spl/board/karo/tx25/Makefile | 7 +- nand_spl/board/karo/tx25/u-boot.lds | 2 +- nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +- spl/.gitignore | 1 - 177 files changed, 380 insertions(+), 351 deletions(-) delete mode 100644 helper.mk
.gitignore +0 -1
@@ -44,7 +44,6 @@ /u-boot.dtb /u-boot.sb /u-boot.geany -/include/u-boot.lst # # Generated files
Makefile +3 -10
@@ -555,10 +555,8 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ - $$UNDEF_LST $(__OBJS) \ + $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot endif
@@ -591,11 +589,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) -$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst +$(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -831,7 +825,6 @@ clean: $(obj)board/matrix_vision/*/bootscript.img \ $(obj)board/voiceblue/eeprom \ $(obj)u-boot.lds \ - $(obj)include/u-boot.lst \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h
@@ -869,7 +862,7 @@ clobber: tidy @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} - @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} + @rm -f $(obj)spl/u-boot-spl.lds @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes
arch/arm/cpu/arm920t/ep93xx/u-boot.lds +1 -1
@@ -51,7 +51,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >.sram . = ALIGN(4);
arch/arm/cpu/ixp/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/arm/cpu/u-boot.lds +1 -1
@@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/avr32/cpu/u-boot.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/blackfin/cpu/u-boot.lds +1 -1
@@ -114,7 +114,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >ram_data .text_l1 :
arch/microblaze/cpu/u-boot.lds +1 -1
@@ -54,7 +54,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .bss ALIGN(0x4):
arch/mips/cpu/u-boot.lds +1 -1
@@ -64,7 +64,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/nds32/cpu/n1213/u-boot.lds +1 -1
@@ -55,7 +55,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
arch/nios2/cpu/u-boot.lds +1 -1
@@ -48,7 +48,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option)
arch/powerpc/cpu/74xx_7xx/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc512x/u-boot.lds +1 -1
@@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc5xx/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
arch/powerpc/cpu/mpc5xxx/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc8220/u-boot.lds +1 -1
@@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc824x/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc8260/u-boot.lds +1 -1
@@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc83xx/u-boot.lds +1 -1
@@ -61,7 +61,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +1 -1
@@ -54,7 +54,7 @@ SECTIONS _edata = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(8);
arch/powerpc/cpu/mpc85xx/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
arch/powerpc/cpu/mpc86xx/u-boot.lds +1 -1
@@ -67,7 +67,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
arch/powerpc/cpu/ppc4xx/u-boot.lds +1 -1
@@ -81,7 +81,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
arch/sandbox/cpu/u-boot.lds +1 -1
@@ -27,7 +27,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } __u_boot_sandbox_option_start = .;
arch/sh/cpu/sh2/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .);
arch/sh/cpu/sh3/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .);
arch/sh/cpu/sh4/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .);
arch/x86/cpu/u-boot.lds +1 -1
@@ -36,7 +36,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
board/BuS/eb_cpu5282/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/LEOX/elpt860/u-boot.lds +1 -1
@@ -89,7 +89,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/RPXClassic/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RPXClassic/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RPXlite/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RPXlite/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RPXlite_dw/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RPXlite_dw/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/RRvision/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/actux1/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4);
board/actux2/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4);
board/actux3/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4);
board/adder/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/altera/nios2-generic/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option)
board/amcc/acadia/u-boot-nand.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/amcc/bamboo/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/amcc/canyonlands/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/amcc/kilauea/u-boot-nand.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/amcc/sequoia/u-boot-nand.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/amcc/sequoia/u-boot-ram.lds +1 -1
@@ -66,7 +66,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/astro/mcf5373l/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/cobra5272/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/cogent/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/cogent/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/cray/L1/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/dave/PPChameleonEVB/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/dvlhost/u-boot.lds +1 -1
@@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4);
board/eltec/mhpc/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/eltec/mhpc/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/emk/top860/u-boot.lds +1 -1
@@ -70,7 +70,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/ep88x/u-boot.lds +1 -1
@@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/esd/dasa_sim/u-boot.lds +1 -1
@@ -76,7 +76,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/esd/pmc440/u-boot-nand.lds +1 -1
@@ -104,7 +104,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/esd/tasreg/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/esteem192e/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/evb64260/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/fads/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/flagadm/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/flagadm/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/freescale/m5208evbe/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m52277evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5235evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5249evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5253demo/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5253evbe/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5271evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5272c3/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5275evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5282evb/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m53017evb/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5329evb/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m5373evb/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m54418twr/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m54451evb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m54455evb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m547xevb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/m548xevb/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/freescale/mx31ads/u-boot.lds +1 -1
@@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4);
board/gaisler/gr_cpci_ax2000/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data :
board/gaisler/gr_ep2s60/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data :
board/gaisler/gr_xc3s_1500/u-boot.lds +1 -1
@@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data :
board/gaisler/grsim/u-boot.lds +1 -1
@@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data :
board/gaisler/grsim_leon2/u-boot.lds +1 -1
@@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data :
board/gen860t/u-boot-flashenv.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/gen860t/u-boot.lds +1 -1
@@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/genietv/u-boot.lds +1 -1
@@ -83,7 +83,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/genietv/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/hermes/u-boot.lds +1 -1
@@ -75,7 +75,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/hermes/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/hymod/u-boot.lds +1 -1
@@ -113,7 +113,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/hymod/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/icu862/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/icu862/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/idmr/u-boot.lds +1 -1
@@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/ip860/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/ip860/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/ivm/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/ivm/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/korat/u-boot-F7FC.lds +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/kup/kup4k/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/kup/kup4k/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/kup/kup4x/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/kup/kup4x/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/lwmon/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/lwmon/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/manroland/uc100/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/matrix_vision/mvsmr/u-boot.lds +1 -1
@@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/mbx8xx/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/mbx8xx/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/mousse/u-boot.lds +1 -1
@@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/mpl/pip405/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/mvblue/u-boot.lds +1 -1
@@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netphone/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netphone/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netta/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netta/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netta2/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netta2/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netvia/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/netvia/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/nx823/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/nx823/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/openrisc/openrisc-generic/u-boot.lds +1 -1
@@ -29,7 +29,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .rodata : {
board/quantum/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/r360mpi/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/rbc823/u-boot.lds +1 -1
@@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .;
board/renesas/sh7752evb/u-boot.lds +1 -1
@@ -78,7 +78,7 @@ SECTIONS PROVIDE (_egot = .); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .);
board/renesas/sh7757lcr/u-boot.lds +1 -1
@@ -79,7 +79,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .);
board/rsdproto/u-boot.lds +1 -1
@@ -100,7 +100,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/samsung/smdk5250/smdk5250-uboot-spl.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >.sram . = ALIGN(4);
board/samsung/smdk6400/u-boot-nand.lds +1 -1
@@ -50,7 +50,7 @@ SECTIONS . = align(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = align(4);
board/sandburst/karef/u-boot.lds.debug +1 -1
@@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/sandburst/metrobox/u-boot.lds.debug +1 -1
@@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/sandpoint/u-boot.lds +1 -1
@@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/sixnet/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/snmc/qs850/u-boot.lds +1 -1
@@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/snmc/qs860t/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/spc1920/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/spd8xx/u-boot.lds +1 -1
@@ -78,7 +78,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/spd8xx/u-boot.lds.debug +1 -1
@@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/stx/stxxtc/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/stx/stxxtc/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/svm_sc8xx/u-boot.lds +1 -1
@@ -86,7 +86,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/tqc/tqm8xx/u-boot.lds +1 -1
@@ -82,7 +82,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/v37/u-boot.lds +1 -1
@@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/w7o/u-boot.lds.debug +1 -1
@@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
board/xes/xpedite1000/u-boot.lds.debug +1 -1
@@ -114,7 +114,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); }
common/cmd_help.c +1 -1
@@ -41,7 +41,7 @@ U_BOOT_CMD( );/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd) = {"?" ,CONFIG_SYS_MAXARGS ,1 , do_help,"alias for 'help'" , #ifdef CONFIG_SYS_LONGHELP
config.mk +0 -2
@@ -23,8 +23,6 @@ ######################################################################### -include $(TOPDIR)/helper.mk - ifeq ($(CURDIR),$(SRCTREE)) dir := else
doc/README.commands +8 -10
@@ -15,24 +15,22 @@ help: Long description. This is a string **** Behind the scene ****** -The structure created is named with a special prefix (__u_boot_list_cmd_) -and placed by the linker in a special section. +The structure created is named with a special prefix and placed by +the linker in a special section using the linker lists mechanism +(see include/linker_lists.h) This makes it possible for the final link to extract all commands compiled into any object code and construct a static array so the -command can be found in an array starting at _u_boot_list_cmd__start. +command array can be iterated over using the linker lists macros. -To ensure that the linker does not discard these symbols when linking -full U-Boot we generate a list of all the commands we have built (based -on the sections mentioned above) and use that to force the linker to -first enter the symbol as undefined in the output object so that there -is then a need for the symbol to be kept (this is the UNDEF_SYM logic in -the Makefile). +The linker lists feature ensures that the linker does not discard +these symbols when linking full U-Boot even though they are not +referenced in the source code as such. If a new board is defined do not forget to define the command section by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these 3 lines: .u_boot_list : { - #include "u-boot.lst"; + KEEP(*(SORT(.u_boot_list*))); }
helper.mk deleted +0 -64
64 lines not on this page · raw message
include/command.h +1 -1
@@ -175,7 +175,7 @@ int cmd_process(int flag, int argc, char * const argv[], _usage, _help, NULL)#define U_BOOT_CMD_COMPLETE (_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ - ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ _usage, _help, _comp);
include/env_callback.h +1 -1
@@ -76,7 +76,7 @@ void env_callback_init(ENTRY *var_entry); }#else #define U_BOOT_ENV_CALLBACK (name, callback) \ - ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ + ll_entry_declare(struct env_clbk_tbl, name, env_clbk) = \ {#name, callback}#endif
include/linker_lists.h +199 -53
321 lines not on this page · raw message
nand_spl/board/freescale/mpc8536ds/Makefile +1 -6
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mpc8569mds/Makefile +1 -6
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mpc8572ds/Makefile +1 -6
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mx31pdk/Makefile +1 -6
@@ -6,7 +6,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -38,11 +37,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/mx31pdk/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
nand_spl/board/freescale/p1010rdb/Makefile +1 -6
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/p1023rds/Makefile +1 -6
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -57,11 +56,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/freescale/p1_p2_rdb/Makefile +1 -6
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/karo/tx25/Makefile +1 -6
@@ -27,7 +27,6 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -59,11 +58,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl/board/karo/tx25/u-boot.lds +1 -1
@@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
nand_spl/board/samsung/smdk6400/u-boot.lds +1 -1
@@ -53,7 +53,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4);
spl/.gitignore +0 -1
@@ -2,4 +2,3 @@ u-boot-spl u-boot-spl.bin u-boot-spl.lds u-boot-spl.map -u-boot.lst
Signature · 1 line
1.7.10.4
v2 cover Get rid of R_ARM_ABS32 relocation records
In reply to Albert ARIBAUDDear Albert ARIBAUD,
Quoted 44 lines
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lstAlbert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arrays
[...]
v2 cover Get rid of R_ARM_ABS32 relocation records
In reply to Albert ARIBAUDQuoted 39 lines · Albert ARIBAUD
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lst
Quoted 5 lines
Albert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arrays
Aside from ARM and I assume Sandbox, has this been runtime tested on other arches yet?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130225/93edbd7e/attachment.pgp>
v2 cover Get rid of R_ARM_ABS32 relocation records
Hi Albert, Tom,
2013/2/25 Tom Rini <[email protected]>:
Quoted 47 lines · Albert ARIBAUD
Quoted 40 lines
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lstQuoted 5 lines
Albert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arrays
Quoted 5 lines
Reviewed-by Tom Rini <[email protected]>Aside from ARM and I assume Sandbox, has this been runtime tested on other arches yet?
I've runtime tested the refactored LGA on MIPS, so
Signature · 2 lines
Best regards, Daniel
v2 cover Get rid of R_ARM_ABS32 relocation records
Quoted 52 lines · Daniel Schwierzeck
Hi Albert, Tom,
2013/2/25 Tom Rini <[email protected]>:
Quoted 49 lines · Albert ARIBAUD
Quoted 40 lines
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lstQuoted 5 lines
Albert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arraysReviewed-by Tom Rini <[email protected]>
Quoted 7 lines
Quoted 3 lines
Aside from ARM and I assume Sandbox, has this been runtime tested on other arches yet?
I've runtime tested the refactored LGA on MIPS, so
Tested-by Daniel Schwierzeck <[email protected]>
I've also now tested this on am335x_evm as part of seeing if it resolved another issue:
Lets bring this in please, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130313/89cc4cb4/attachment.pgp>
v2 cover Get rid of R_ARM_ABS32 relocation records
In reply to Tom RiniHi Tom,
Quoted 47 lines · Tom Rini
Quoted 39 lines · Albert ARIBAUD
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lstQuoted 5 lines
Albert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arrays
Quoted 4 lines
Reviewed-by Tom Rini <[email protected]>Aside from ARM and I assume Sandbox, has this been runtime tested on other arches yet?
None other on my side.
Amicalement,
Signature · 1 line
Albert.
v2 cover Get rid of R_ARM_ABS32 relocation records
In reply to Albert ARIBAUDQuoted 232 lines · Albert ARIBAUD
R_ARM_ABS32relocation records cause symbol references to be zero before relocation, and become correct only after relocation. On the other hand,R_ARM_RELATIVErecords make references correct before as well as after relocation.This patch series aims at removing all
R_ARM_ABS32relocations from ARM targets.the main contributor of
R_ARM_ABS32relocations is the support code for linker-lists, aka Linker-Generated Arrays. This is due to the fact that LGA start and end symbols, used for ranging these arrays, are linker- generated symbols, which always relocate asR_ARM_ABS32even though they are supposed *not* to be absolute.V1 of this patch series fixed LGAs so that start or end symbols are actually compiler-generated, and thus their references are relocated using
R_ARM_RELATIVE; V2 also fixes crt0 so that BSS start and end references do not produceR_ARM_ABS32relocations either.With V2, none of the targets built with MAKEALL -a arm produces any
R_ARM_ABS32relocation.This series has been build-tested with ARM (295 targets clean) and powerpc (634 targets clean)
Changes in v2:
- fixed missing .sram memory mapping in OMAP lds
- removed useless linker script sections in SPL lds files
- made BSS start and end compiler-generated
- moved SPL linker script changes to their own commit
- addedKEEP()to all linker files
- removed spurious change tocommon/command.c
- changed empty type from struct {} to char[0]
- dropped patch to removedboard/micronas/vct/u-boot.lds
- removed all references to u-boot.lstAlbert ARIBAUD (4):
arm: omap: mapu_boot_listssection to .sram Remove linker lists (LGAs) from SPL linker scripts
arm: make__bss_startand__bss_end__compiler-generated Refactor linker-generated arrays.gitignore | 1 - Makefile | 13 +- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 - arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 - arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 67 ++++++ arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 4 - arch/arm/cpu/ixp/u-boot.lds | 14 +- arch/arm/cpu/u-boot-spl.lds | 93 ++++++++ arch/arm/cpu/u-boot.lds | 14 +- arch/arm/lib/Makefile | 1 + arch/arm/lib/bss.c | 39 ++++ arch/avr32/cpu/u-boot.lds | 2 +- arch/blackfin/cpu/u-boot.lds | 2 +- arch/microblaze/cpu/u-boot.lds | 2 +- arch/mips/cpu/u-boot.lds | 2 +- arch/nds32/cpu/n1213/u-boot.lds | 2 +- arch/nios2/cpu/u-boot.lds | 2 +- arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +- arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +- arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +- arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +- arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +- arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +- arch/sandbox/cpu/u-boot.lds | 2 +- arch/sh/cpu/sh2/u-boot.lds | 2 +- arch/sh/cpu/sh3/u-boot.lds | 2 +- arch/sh/cpu/sh4/u-boot.lds | 2 +- arch/x86/cpu/u-boot.lds | 2 +- board/BuS/eb_cpu5282/u-boot.lds | 2 +- board/LEOX/elpt860/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds | 2 +- board/RPXClassic/u-boot.lds.debug | 2 +- board/RPXlite/u-boot.lds | 2 +- board/RPXlite/u-boot.lds.debug | 2 +- board/RPXlite_dw/u-boot.lds | 2 +- board/RPXlite_dw/u-boot.lds.debug | 2 +- board/RRvision/u-boot.lds | 2 +- board/actux1/u-boot.lds | 24 ++- board/actux2/u-boot.lds | 24 ++- board/actux3/u-boot.lds | 18 +- board/adder/u-boot.lds | 2 +- board/ait/cam_enc_4xx/u-boot-spl.lds | 4 - board/altera/nios2-generic/u-boot.lds | 2 +- board/amcc/acadia/u-boot-nand.lds | 2 +- board/amcc/bamboo/u-boot-nand.lds | 2 +- board/amcc/canyonlands/u-boot-nand.lds | 2 +- board/amcc/kilauea/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-nand.lds | 2 +- board/amcc/sequoia/u-boot-ram.lds | 2 +- board/astro/mcf5373l/u-boot.lds | 2 +- board/cobra5272/u-boot.lds | 2 +- board/cogent/u-boot.lds | 2 +- board/cogent/u-boot.lds.debug | 2 +- board/cray/L1/u-boot.lds.debug | 2 +- board/dave/PPChameleonEVB/u-boot.lds | 2 +- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 - board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 - board/dvlhost/u-boot.lds | 18 +- board/eltec/mhpc/u-boot.lds | 2 +- board/eltec/mhpc/u-boot.lds.debug | 2 +- board/emk/top860/u-boot.lds | 2 +- board/ep88x/u-boot.lds | 2 +- board/esd/dasa_sim/u-boot.lds | 2 +- board/esd/pmc440/u-boot-nand.lds | 2 +- board/esd/tasreg/u-boot.lds | 2 +- board/esteem192e/u-boot.lds | 2 +- board/evb64260/u-boot.lds | 2 +- board/fads/u-boot.lds | 2 +- board/flagadm/u-boot.lds | 2 +- board/flagadm/u-boot.lds.debug | 2 +- board/freescale/m5208evbe/u-boot.lds | 2 +- board/freescale/m52277evb/u-boot.lds | 2 +- board/freescale/m5235evb/u-boot.lds | 2 +- board/freescale/m5249evb/u-boot.lds | 2 +- board/freescale/m5253demo/u-boot.lds | 2 +- board/freescale/m5253evbe/u-boot.lds | 2 +- board/freescale/m5271evb/u-boot.lds | 2 +- board/freescale/m5272c3/u-boot.lds | 2 +- board/freescale/m5275evb/u-boot.lds | 2 +- board/freescale/m5282evb/u-boot.lds | 2 +- board/freescale/m53017evb/u-boot.lds | 2 +- board/freescale/m5329evb/u-boot.lds | 2 +- board/freescale/m5373evb/u-boot.lds | 2 +- board/freescale/m54418twr/u-boot.lds | 2 +- board/freescale/m54451evb/u-boot.lds | 2 +- board/freescale/m54455evb/u-boot.lds | 2 +- board/freescale/m547xevb/u-boot.lds | 2 +- board/freescale/m548xevb/u-boot.lds | 2 +- board/freescale/mx31ads/u-boot.lds | 16 +- board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +- board/gaisler/gr_ep2s60/u-boot.lds | 2 +- board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +- board/gaisler/grsim/u-boot.lds | 2 +- board/gaisler/grsim_leon2/u-boot.lds | 2 +- board/gen860t/u-boot-flashenv.lds | 2 +- board/gen860t/u-boot.lds | 2 +- board/genietv/u-boot.lds | 2 +- board/genietv/u-boot.lds.debug | 2 +- board/hermes/u-boot.lds | 2 +- board/hermes/u-boot.lds.debug | 2 +- board/hymod/u-boot.lds | 2 +- board/hymod/u-boot.lds.debug | 2 +- board/icu862/u-boot.lds | 2 +- board/icu862/u-boot.lds.debug | 2 +- board/idmr/u-boot.lds | 2 +- board/ip860/u-boot.lds | 2 +- board/ip860/u-boot.lds.debug | 2 +- board/ivm/u-boot.lds | 2 +- board/ivm/u-boot.lds.debug | 2 +- board/korat/u-boot-F7FC.lds | 2 +- board/kup/kup4k/u-boot.lds | 2 +- board/kup/kup4k/u-boot.lds.debug | 2 +- board/kup/kup4x/u-boot.lds | 2 +- board/kup/kup4x/u-boot.lds.debug | 2 +- board/lwmon/u-boot.lds | 2 +- board/lwmon/u-boot.lds.debug | 2 +- board/manroland/uc100/u-boot.lds | 2 +- board/matrix_vision/mvsmr/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds | 2 +- board/mbx8xx/u-boot.lds.debug | 2 +- board/mousse/u-boot.lds | 2 +- board/mpl/pip405/u-boot.lds.debug | 2 +- board/mvblue/u-boot.lds | 2 +- board/netphone/u-boot.lds | 2 +- board/netphone/u-boot.lds.debug | 2 +- board/netta/u-boot.lds | 2 +- board/netta/u-boot.lds.debug | 2 +- board/netta2/u-boot.lds | 2 +- board/netta2/u-boot.lds.debug | 2 +- board/netvia/u-boot.lds | 2 +- board/netvia/u-boot.lds.debug | 2 +- board/nx823/u-boot.lds | 2 +- board/nx823/u-boot.lds.debug | 2 +- board/openrisc/openrisc-generic/u-boot.lds | 2 +- board/quantum/u-boot.lds | 2 +- board/r360mpi/u-boot.lds | 2 +- board/rbc823/u-boot.lds | 2 +- board/renesas/sh7752evb/u-boot.lds | 2 +- board/renesas/sh7757lcr/u-boot.lds | 2 +- board/rsdproto/u-boot.lds | 2 +- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 2 +- board/samsung/smdk6400/u-boot-nand.lds | 2 +- board/sandburst/karef/u-boot.lds.debug | 2 +- board/sandburst/metrobox/u-boot.lds.debug | 2 +- board/sandpoint/u-boot.lds | 2 +- board/sixnet/u-boot.lds | 2 +- board/snmc/qs850/u-boot.lds | 2 +- board/snmc/qs860t/u-boot.lds | 2 +- board/spc1920/u-boot.lds | 2 +- board/spd8xx/u-boot.lds | 2 +- board/spd8xx/u-boot.lds.debug | 2 +- board/stx/stxxtc/u-boot.lds | 2 +- board/stx/stxxtc/u-boot.lds.debug | 2 +- board/svm_sc8xx/u-boot.lds | 2 +- board/tqc/tqm8xx/u-boot.lds | 2 +- board/v37/u-boot.lds | 2 +- board/vpac270/u-boot-spl.lds | 4 - board/w7o/u-boot.lds.debug | 2 +- board/xes/xpedite1000/u-boot.lds.debug | 2 +- common/cmd_help.c | 2 +- config.mk | 2 - doc/README.commands | 18 +- helper.mk | 64 ------ include/command.h | 2 +- include/configs/am335x_evm.h | 2 +- include/configs/pcm051.h | 2 +- include/env_callback.h | 2 +- include/linker_lists.h | 252 +++++++++++++++++----- nand_spl/board/freescale/mpc8536ds/Makefile | 7 +- nand_spl/board/freescale/mpc8569mds/Makefile | 7 +- nand_spl/board/freescale/mpc8572ds/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/Makefile | 7 +- nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +- nand_spl/board/freescale/p1010rdb/Makefile | 7 +- nand_spl/board/freescale/p1023rds/Makefile | 7 +- nand_spl/board/freescale/p1_p2_rdb/Makefile | 7 +- nand_spl/board/karo/tx25/Makefile | 7 +- nand_spl/board/karo/tx25/u-boot.lds | 2 +-
Quoted 8 lines
nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +- spl/.gitignore | 1 - spl/Makefile | 8 +- 190 files changed, 665 insertions(+), 424 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/u-boot-spl.lds create mode 100644 arch/arm/cpu/u-boot-spl.lds create mode 100644 arch/arm/lib/bss.c delete mode 100644 helper.mk
Applied to u-boot-arm/master.
Amicalement,
Signature · 1 line
Albert.