ARM i.MX25: clk: parent per5_clk to AHB clock
Subsystems (3)
PATCH v2 1/1 ARM i.MX25: clk: parent per5_clk to AHB clock
The mxc-timer on the imx25 needs to be derived from the AHB clock. If a bootloader reparents this clock to the ipg_clk_highfreq, which according to the datasheet is a valid operation, the system can/will produce lockups/ freezes after some time [1].
This can be forced with code like
while(1)
syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp);This was already fixed with the commit
"i.MX25 GPT clock fix: ensure correct the clock source" [2],
for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework ("ARM i.MX25: implement clocks using common clock framework") [3]
[1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html
[2]: 2012d9ca2a1381ae3e733330a7f0d1d2f1988bba
[3]: 6bbaec5676e4f475b0d78743cbd4c70a8804ce14
--- arch/arm/mach-imx/clk-imx25.c | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/mach-imx/clk-imx25.c +3 -0
@@ -177,6 +177,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)pr_err ("i.MX25 clk %d: register failed with %ld\n" , i,PTR_ERR (clk[i])); +/* Clock source for gpt must be derived from AHB */ +clk_set_parent (clk[per5_sel], clk[ahb]); +clk_register_clkdev (clk[ipg],"ipg" ,"imx-gpt.0" );clk_register_clkdev (clk[gpt_ipg_per],"per" ,"imx-gpt.0" );
Signature · 1 line
1.7.10.4
PATCH v2 1/1 ARM i.MX25: clk: parent per5_clk to AHB clock
Quoted 14 lines · Steffen Trumtrar
The mxc-timer on the imx25 needs to be derived from the AHB clock. If a bootloader reparents this clock to the
ipg_clk_highfreq, which according to the datasheet is a valid operation, the system can/will produce lockups/ freezes after some time [1].This can be forced with code like
while(1) syscall(SYS_clock_gettime, CLOCK_REALTIME, &tp);This was already fixed with the commit
"i.MX25 GPT clock fix: ensure correct the clock source" [2],
for 3.1-rc2, but was lost, when i.MX was converted to the common clock framework ("ARM i.MX25: implement clocks using common clock framework") [3]
Quoted 6 lines
[1]: http://lists.arm.linux.org.uk/lurker/message/20130129.161230.229bda17.en.html
[2]:2012d9ca2a1381ae3e733330a7f0d1d2f1988bba
[3]:6bbaec5676e4f475b0d78743cbd4c70a8804ce14Signed-off-by Steffen Trumtrar <[email protected]>Cc stable at vger.kernel.org # v3.5+
Applied, thanks
Sascha
Quoted 22 lines
--- arch/arm/mach-imx/clk-imx25.c | 3 +++ 1 file changed, 3 insertions(+)arch/arm/mach-imx/clk-imx25.c +3
-0@@ -177,6 +177,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)pr_err ("i.MX25 clk %d: register failed with %ld\n" , i,PTR_ERR (clk[i])); +/* Clock source for gpt must be derived from AHB */ +clk_set_parent (clk[per5_sel], clk[ahb]); +clk_register_clkdev (clk[ipg],"ipg" ,"imx-gpt.0" );clk_register_clkdev (clk[gpt_ipg_per],"per" ,"imx-gpt.0" );Signature · 1 line
1.7.10.4
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |