Correctly set data for USB request in case of a previous failure.
Subsystems (2)
PATCH 1/1 Correctly set data for USB request in case of a previous failure.
Quoted 1 line
From
a88d72d2108f92f004a3f050a708d9b7f661f924Mon Sep 17 00:00:00 2001
From: Hans Petter Selasky <[email protected]>
Date: Mon, 14 Jan 2013 13:53:21 +0100
Subject: [PATCH] Correctly initialize data for USB request.
Found-by Jan Beich
Signed-off-by Hans Petter Selasky <[email protected]>
--- drivers/input/tablet/wacom.h | 1 + drivers/input/tablet/wacom_sys.c | 8 +++++--- 2 files changed, 6 insertions(+), 3 deletions(-)
drivers/input/tablet/wacom.h +1 -0
@@ -89,6 +89,7 @@#include <linux/init.h> #include <linux/usb/input.h> #include <linux/power_supply.h> +#include <linux/string.h> #include <asm/unaligned.h> /*
drivers/input/tablet/wacom_sys.c +5 -3
@@ -553,10 +553,12 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, intif (!rep_data)return error; - rep_data[0 ] = report_id; - rep_data[1 ] = mode; - do { + memset(rep_data, 0, length); + + rep_data[0] = report_id; + rep_data[1] = mode; + error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, report_id, rep_data, length, 1); if (error >= 0)
Signature · 1 line
1.7.11.4