ARM: netx: bump IRQ offset to 64
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/2 ARM: netx: bump IRQ offset to 64
Hi Linus,
Quoted 4 lines · Linus Walleij
The Netx IRQs offset from zero, which is illegal, since Linux IRQ 0 is
NO_IRQ.Cc Jamie Iles <[email protected]>
Quoted 6 lines
Cc Sascha Hauer <[email protected]>Signed-off-by Linus Walleij <[email protected]>---
Jamie, Sascha: are you actually booting this machine from time to time? I think this has been broken for a while. I hope HEAD plus this patch will make it work anyway.
No, I've never had a netx machine and have only been able to compile test in the past. Perhaps it's my memory, but I seem to recall someone (Russell maybe?) suggesting deleting netx at some point in the past.
Jamie
PATCH 1/2 ARM: netx: bump IRQ offset to 64
In reply to a message not in the archiveQuoted 10 lines · Linus Walleij
The Netx IRQs offset from zero, which is illegal, since Linux IRQ 0 is
NO_IRQ.Cc Jamie Iles <[email protected]>Cc Sascha Hauer <[email protected]>Signed-off-by Linus Walleij <[email protected]>---
Jamie, Sascha: are you actually booting this machine from time to time? I think this has been broken for a while. I hope HEAD plus this patch will make it work anyway.
I would have to ask Juergen (Cced). Otherwise:
Sascha
Quoted 101 lines
--- arch/arm/mach-netx/generic.c | 2 +- arch/arm/mach-netx/include/mach/irqs.h | 64 +++++++++++++++++----------------- 2 files changed, 33 insertions(+), 33 deletions(-)arch/arm/mach-netx/generic.c +1
-1@@ -168,7 +168,7 @@ void __init netx_init_irq(void) {int irq; -vic_init (io_p2v (NETX_PA_VIC ),0 , ~0 ,0 ); +vic_init (io_p2v (NETX_PA_VIC ),NETX_IRQ_VIC_START , ~0 ,0 );for (irq =NETX_IRQ_HIF_CHAINED (0 ); irq <=NETX_IRQ_HIF_LAST ; irq++) { irq_set_chip_and_handler(irq, &netx_hif_chip,arch/arm/mach-netx/include/mach/irqs.h +32
-32@@ -17,42 +17,42 @@* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define NETX_IRQ_VIC_START 0 -#define NETX_IRQ_SOFTINT 0 -#define NETX_IRQ_TIMER0 1 -#define NETX_IRQ_TIMER1 2 -#define NETX_IRQ_TIMER2 3 -#define NETX_IRQ_SYSTIME_NS 4 -#define NETX_IRQ_SYSTIME_S 5 -#define NETX_IRQ_GPIO_15 6 -#define NETX_IRQ_WATCHDOG 7 -#define NETX_IRQ_UART0 8 -#define NETX_IRQ_UART1 9 -#define NETX_IRQ_UART2 10 -#define NETX_IRQ_USB 11 -#define NETX_IRQ_SPI 12 -#define NETX_IRQ_I2C 13 -#define NETX_IRQ_LCD 14 -#define NETX_IRQ_HIF 15 -#define NETX_IRQ_GPIO_0_14 16 -#define NETX_IRQ_XPEC0 17 -#define NETX_IRQ_XPEC1 18 -#define NETX_IRQ_XPEC2 19 -#define NETX_IRQ_XPEC3 20 -#define NETX_IRQ_XPEC (no) (17 + (no)) -#define NETX_IRQ_MSYNC0 21 -#define NETX_IRQ_MSYNC1 22 -#define NETX_IRQ_MSYNC2 23 -#define NETX_IRQ_MSYNC3 24 -#define NETX_IRQ_IRQ_PHY 25 -#define NETX_IRQ_ISO_AREA 26 +#define NETX_IRQ_VIC_START 64 +#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0) +#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1) +#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2) +#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3) +#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4) +#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5) +#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6) +#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7) +#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8) +#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9) +#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10) +#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11) +#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12) +#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13) +#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14) +#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15) +#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16) +#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17) +#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18) +#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19) +#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20) +#define NETX_IRQ_XPEC (no) (NETX_IRQ_VIC_START + 17 + (no)) +#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21) +#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22) +#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23) +#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24) +#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25) +#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26)/* int 27 is reserved */ /* int 28 is reserved */ -#define NETX_IRQ_TIMER3 29 -#define NETX_IRQ_TIMER4 30 +#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29) +#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30)/* int 31 is reserved */ -#define NETX_IRQS 32 +#define NETX_IRQS (NETX_IRQ_VIC_START + 32)/* for multiplexed irqs on gpio 0..14 */ #define NETX_IRQ_GPIO (x) (NETX_IRQS + (x))Signature · 1 line
1.8.1
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |